From: Vagrant Cascadian <vagrant@debian.org>
To: 40218-done@debbugs.gnu.org
Subject: bug#40218: linux-libre patch to support pinebook pro
Date: Wed, 25 Mar 2020 19:03:56 -0700 [thread overview]
Message-ID: <87o8sjkh2r.fsf@yucca> (raw)
In-Reply-To: <87a74516fx.fsf@yucca>
[-- Attachment #1: Type: text/plain, Size: 33166 bytes --]
On 2020-03-24, Vagrant Cascadian wrote:
> I've got a backported linux patch to support pinebook pro with
> linux-libre 5.4.x. It's very limited support... no LCD, no battery
> status, no RTC, etc. but it works!
>
> The one reason I haven't pushed the patch is it would cause useless
> rebuilds of linux-libre for x86_64, i686 and armhf; I've been trying to
> make that conditional for aarch64 and not been very successful at it; if
> someone could help with that, or give me the go-ahead to merge as is
> ... that'd be great!
Since 5.4.28 was just pushed and not yet built, I went ahead and pushed
this patch without figuring out how to do the conditional.
live well,
vagrant
>
> live well,
> vagrant
> From 8a5e3cf012634bda0df4e7562494d3bab43004a2 Mon Sep 17 00:00:00 2001
> From: Vagrant Cascadian <vagrant@debian.org>
> Date: Sat, 14 Mar 2020 23:20:12 -0700
> Subject: [PATCH] gnu: linux-libre-5.4-source: Add patch to support pinebook
> pro.
>
> * gnu/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch:
> New file.
> * gnu/local.mk (dist_patch_DATA): Update accordingly.
> * gnu/packages/linux (linux-libre-5.4-source): Add patch.
> ---
> gnu/local.mk | 1 +
> gnu/packages/linux.scm | 6 +-
> ...re-Add-initial-support-for-Pinebook-.patch | 1135 +++++++++++++++++
> 3 files changed, 1141 insertions(+), 1 deletion(-)
> create mode 100644 gnu/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch
>
> diff --git a/gnu/local.mk b/gnu/local.mk
> index 7cce60b7c0..345d72090e 100644
> --- a/gnu/local.mk
> +++ b/gnu/local.mk
> @@ -1158,6 +1158,7 @@ dist_patch_DATA = \
> %D%/packages/patches/lierolibre-remove-arch-warning.patch \
> %D%/packages/patches/lierolibre-try-building-other-arch.patch \
> %D%/packages/patches/linkchecker-tests-require-network.patch \
> + %D%/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch \
> %D%/packages/patches/linux-pam-no-setfsuid.patch \
> %D%/packages/patches/lirc-localstatedir.patch \
> %D%/packages/patches/lirc-reproducible-build.patch \
> diff --git a/gnu/packages/linux.scm b/gnu/packages/linux.scm
> index f2dcc325ff..dfddf366eb 100644
> --- a/gnu/packages/linux.scm
> +++ b/gnu/packages/linux.scm
> @@ -433,7 +433,11 @@ corresponding UPSTREAM-SOURCE (an origin), using the given DEBLOB-SCRIPTS."
> (define-public linux-libre-5.4-source
> (source-with-patches linux-libre-5.4-pristine-source
> (list %boot-logo-patch
> - %linux-libre-arm-export-__sync_icache_dcache-patch)))
> + %linux-libre-arm-export-__sync_icache_dcache-patch
> + ;; Pinebook Pro patch from linux-next,
> + ;; can be dropped for linux-libre 5.7
> + (search-patch
> + "linux-libre-Add-initial-support-for-Pinebook-.patch"))))
>
> (define-public linux-libre-4.19-source
> (source-with-patches linux-libre-4.19-pristine-source
> diff --git a/gnu/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch b/gnu/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch
> new file mode 100644
> index 0000000000..659e10cba6
> --- /dev/null
> +++ b/gnu/packages/patches/linux-libre-Add-initial-support-for-Pinebook-.patch
> @@ -0,0 +1,1135 @@
> +From d87a8072e8129a579246d8d31a591ca2aec05275 Mon Sep 17 00:00:00 2001
> +From: Tobias Schramm <t.schramm@manjaro.org>
> +Date: Wed, 4 Mar 2020 22:30:23 +0100
> +Subject: [PATCH] arm64: dts: rockchip: Add initial support for Pinebook Pro
> +
> +This commit adds initial dt support for the rk3399 based Pinebook Pro.
> +
> +Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
> +Link: https://lore.kernel.org/r/20200304213023.689983-3-t.schramm@manjaro.org
> +Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> +
> +Taken from next-20200313 commit 5a65505a6988443b211d3bf3f5bb5b79907c33b9
> +---
> + arch/arm64/boot/dts/rockchip/Makefile | 1 +
> + .../boot/dts/rockchip/rk3399-pinebook-pro.dts | 1096 +++++++++++++++++
> + 2 files changed, 1097 insertions(+)
> + create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> +
> +diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> +index 1f18a9392d15..7de9b61d6415 100644
> +--- a/arch/arm64/boot/dts/rockchip/Makefile
> ++++ b/arch/arm64/boot/dts/rockchip/Makefile
> +@@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
> ++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
> + dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
> +diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> +new file mode 100644
> +index 000000000000..5ea281b55fe2
> +--- /dev/null
> ++++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
> +@@ -0,0 +1,1096 @@
> ++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> ++/*
> ++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> ++ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
> ++ * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
> ++ */
> ++
> ++/dts-v1/;
> ++#include <dt-bindings/input/gpio-keys.h>
> ++#include <dt-bindings/input/linux-event-codes.h>
> ++#include <dt-bindings/pwm/pwm.h>
> ++#include <dt-bindings/usb/pd.h>
> ++#include <dt-bindings/leds/common.h>
> ++#include "rk3399.dtsi"
> ++#include "rk3399-opp.dtsi"
> ++
> ++/ {
> ++ model = "Pine64 Pinebook Pro";
> ++ compatible = "pine64,pinebook-pro", "rockchip,rk3399";
> ++
> ++ chosen {
> ++ stdout-path = "serial2:1500000n8";
> ++ };
> ++
> ++ backlight: edp-backlight {
> ++ compatible = "pwm-backlight";
> ++ power-supply = <&vcc_12v>;
> ++ pwms = <&pwm0 0 740740 0>;
> ++ };
> ++
> ++ edp_panel: edp-panel {
> ++ compatible = "boe,nv140fhmn49";
> ++ backlight = <&backlight>;
> ++ enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&panel_en_gpio>;
> ++ power-supply = <&vcc3v3_panel>;
> ++
> ++ ports {
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++
> ++ port@0 {
> ++ reg = <0>;
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++
> ++ panel_in_edp: endpoint@0 {
> ++ reg = <0>;
> ++ remote-endpoint = <&edp_out_panel>;
> ++ };
> ++ };
> ++ };
> ++ };
> ++
> ++ /*
> ++ * Use separate nodes for gpio-keys to allow for selective deactivation
> ++ * of wakeup sources via sysfs without disabling the whole key
> ++ */
> ++ gpio-key-lid {
> ++ compatible = "gpio-keys";
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&lidbtn_gpio>;
> ++
> ++ lid {
> ++ debounce-interval = <20>;
> ++ gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
> ++ label = "Lid";
> ++ linux,code = <SW_LID>;
> ++ linux,input-type = <EV_SW>;
> ++ wakeup-event-action = <EV_ACT_DEASSERTED>;
> ++ wakeup-source;
> ++ };
> ++ };
> ++
> ++ gpio-key-power {
> ++ compatible = "gpio-keys";
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&pwrbtn_gpio>;
> ++
> ++ power {
> ++ debounce-interval = <20>;
> ++ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
> ++ label = "Power";
> ++ linux,code = <KEY_POWER>;
> ++ wakeup-source;
> ++ };
> ++ };
> ++
> ++ leds {
> ++ compatible = "gpio-leds";
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&pwrled_gpio &slpled_gpio>;
> ++
> ++ green-led {
> ++ color = <LED_COLOR_ID_GREEN>;
> ++ default-state = "on";
> ++ function = LED_FUNCTION_POWER;
> ++ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> ++ label = "green:power";
> ++ };
> ++
> ++ red-led {
> ++ color = <LED_COLOR_ID_RED>;
> ++ default-state = "off";
> ++ function = LED_FUNCTION_STANDBY;
> ++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> ++ label = "red:standby";
> ++ panic-indicator;
> ++ retain-state-suspended;
> ++ };
> ++ };
> ++
> ++ /* Power sequence for SDIO WiFi module */
> ++ sdio_pwrseq: sdio-pwrseq {
> ++ compatible = "mmc-pwrseq-simple";
> ++ clocks = <&rk808 1>;
> ++ clock-names = "ext_clock";
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&wifi_enable_h_gpio>;
> ++ post-power-on-delay-ms = <100>;
> ++ power-off-delay-us = <500000>;
> ++
> ++ /* WL_REG_ON on module */
> ++ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> ++ };
> ++
> ++ /* Audio components */
> ++ es8316-sound {
> ++ compatible = "simple-audio-card";
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&hp_det_gpio>;
> ++ simple-audio-card,name = "rockchip,es8316-codec";
> ++ simple-audio-card,format = "i2s";
> ++ simple-audio-card,mclk-fs = <256>;
> ++
> ++ simple-audio-card,widgets =
> ++ "Microphone", "Mic Jack",
> ++ "Headphone", "Headphones",
> ++ "Speaker", "Speaker";
> ++ simple-audio-card,routing =
> ++ "MIC1", "Mic Jack",
> ++ "Headphones", "HPOL",
> ++ "Headphones", "HPOR",
> ++ "Speaker Amplifier INL", "HPOL",
> ++ "Speaker Amplifier INR", "HPOR",
> ++ "Speaker", "Speaker Amplifier OUTL",
> ++ "Speaker", "Speaker Amplifier OUTR";
> ++
> ++ simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
> ++ simple-audio-card,aux-devs = <&speaker_amp>;
> ++ simple-audio-card,pin-switches = "Speaker";
> ++
> ++ simple-audio-card,cpu {
> ++ sound-dai = <&i2s1>;
> ++ };
> ++
> ++ simple-audio-card,codec {
> ++ sound-dai = <&es8316>;
> ++ };
> ++ };
> ++
> ++ speaker_amp: speaker-amplifier {
> ++ compatible = "simple-audio-amplifier";
> ++ enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
> ++ sound-name-prefix = "Speaker Amplifier";
> ++ VCC-supply = <&pa_5v>;
> ++ };
> ++
> ++ /* Power tree */
> ++ /* Root power source */
> ++ vcc_sysin: vcc-sysin {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc_sysin";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ };
> ++
> ++ /* Regulators supplied by vcc_sysin */
> ++ /* LCD backlight supply */
> ++ vcc_12v: vcc-12v {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc_12v";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <12000000>;
> ++ regulator-max-microvolt = <12000000>;
> ++ vin-supply = <&vcc_sysin>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* Main 3.3 V supply */
> ++ vcc3v3_sys: wifi_bat: vcc3v3-sys {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc3v3_sys";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <3300000>;
> ++ regulator-max-microvolt = <3300000>;
> ++ vin-supply = <&vcc_sysin>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* 5 V USB power supply */
> ++ vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
> ++ compatible = "regulator-fixed";
> ++ enable-active-high;
> ++ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&pwr_5v_gpio>;
> ++ regulator-name = "vcc5v0_usb";
> ++ regulator-always-on;
> ++ regulator-min-microvolt = <5000000>;
> ++ regulator-max-microvolt = <5000000>;
> ++ vin-supply = <&vcc_sysin>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* RK3399 logic supply */
> ++ vdd_log: vdd-log {
> ++ compatible = "pwm-regulator";
> ++ pwms = <&pwm2 0 25000 1>;
> ++ regulator-name = "vdd_log";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <800000>;
> ++ regulator-max-microvolt = <1400000>;
> ++ vin-supply = <&vcc_sysin>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* Regulators supplied by vcc3v3_sys */
> ++ /* 0.9 V supply, always on */
> ++ vcc_0v9: vcc-0v9 {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc_0v9";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <900000>;
> ++ regulator-max-microvolt = <900000>;
> ++ vin-supply = <&vcc3v3_sys>;
> ++ };
> ++
> ++ /* S3 1.8 V supply, switched by vcc1v8_s3 */
> ++ vcca1v8_s3: vcc1v8-s3 {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcca1v8_s3";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1800000>;
> ++ regulator-max-microvolt = <1800000>;
> ++ vin-supply = <&vcc3v3_sys>;
> ++ };
> ++
> ++ /* micro SD card power */
> ++ vcc3v0_sd: vcc3v0-sd {
> ++ compatible = "regulator-fixed";
> ++ enable-active-high;
> ++ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
> ++ regulator-name = "vcc3v0_sd";
> ++ regulator-always-on;
> ++ regulator-min-microvolt = <3000000>;
> ++ regulator-max-microvolt = <3000000>;
> ++ vin-supply = <&vcc3v3_sys>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* LCD panel power, called VCC3V3_S0 in schematic */
> ++ vcc3v3_panel: vcc3v3-panel {
> ++ compatible = "regulator-fixed";
> ++ enable-active-high;
> ++ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&lcdvcc_en_gpio>;
> ++ regulator-name = "vcc3v3_panel";
> ++ regulator-always-on;
> ++ regulator-min-microvolt = <3300000>;
> ++ regulator-max-microvolt = <3300000>;
> ++ regulator-enable-ramp-delay = <100000>;
> ++ vin-supply = <&vcc3v3_sys>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* M.2 adapter power, switched by vcc1v8_s3 */
> ++ vcc3v3_ssd: vcc3v3-ssd {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc3v3_ssd";
> ++ regulator-min-microvolt = <3300000>;
> ++ regulator-max-microvolt = <3300000>;
> ++ vin-supply = <&vcc3v3_sys>;
> ++ };
> ++
> ++ /* Regulators supplied by vcc5v0_usb */
> ++ /* USB 3 port power supply regulator */
> ++ vcc5v0_otg: vcc5v0-otg {
> ++ compatible = "regulator-fixed";
> ++ enable-active-high;
> ++ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&vcc5v0_host_en_gpio>;
> ++ regulator-name = "vcc5v0_otg";
> ++ regulator-always-on;
> ++ regulator-min-microvolt = <5000000>;
> ++ regulator-max-microvolt = <5000000>;
> ++ vin-supply = <&vcc5v0_usb>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* Regulators supplied by vcc5v0_usb */
> ++ /* Type C port power supply regulator */
> ++ vbus_5vout: vbus_typec: vbus-5vout {
> ++ compatible = "regulator-fixed";
> ++ enable-active-high;
> ++ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
> ++ regulator-name = "vbus_5vout";
> ++ regulator-min-microvolt = <5000000>;
> ++ regulator-max-microvolt = <5000000>;
> ++ vin-supply = <&vcc5v0_usb>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ /* Regulators supplied by vcc_1v8 */
> ++ /* Primary 0.9 V LDO */
> ++ vcca0v9_s3: vcca0v9-s3 {
> ++ compatible = "regulator-fixed";
> ++ regulator-name = "vcc0v9_s3";
> ++ regulator-min-microvolt = <5000000>;
> ++ regulator-max-microvolt = <5000000>;
> ++ vin-supply = <&vcc_1v8>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ };
> ++ };
> ++
> ++ mains_charger: dc-charger {
> ++ compatible = "gpio-charger";
> ++ charger-type = "mains";
> ++ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
> ++
> ++ /* Also triggered by USB charger */
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&dc_det_gpio>;
> ++ };
> ++};
> ++
> ++&cdn_dp {
> ++ status = "okay";
> ++};
> ++
> ++&cpu_b0 {
> ++ cpu-supply = <&vdd_cpu_b>;
> ++};
> ++
> ++&cpu_b1 {
> ++ cpu-supply = <&vdd_cpu_b>;
> ++};
> ++
> ++&cpu_l0 {
> ++ cpu-supply = <&vdd_cpu_l>;
> ++};
> ++
> ++&cpu_l1 {
> ++ cpu-supply = <&vdd_cpu_l>;
> ++};
> ++
> ++&cpu_l2 {
> ++ cpu-supply = <&vdd_cpu_l>;
> ++};
> ++
> ++&cpu_l3 {
> ++ cpu-supply = <&vdd_cpu_l>;
> ++};
> ++
> ++&edp {
> ++ force-hpd;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&edp_hpd>;
> ++ status = "okay";
> ++
> ++ ports {
> ++ edp_out: port@1 {
> ++ reg = <1>;
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++
> ++ edp_out_panel: endpoint@0 {
> ++ reg = <0>;
> ++ remote-endpoint = <&panel_in_edp>;
> ++ };
> ++ };
> ++ };
> ++};
> ++
> ++&emmc_phy {
> ++ status = "okay";
> ++};
> ++
> ++&gpu {
> ++ mali-supply = <&vdd_gpu>;
> ++ status = "okay";
> ++};
> ++
> ++&hdmi_sound {
> ++ status = "okay";
> ++};
> ++
> ++&i2c0 {
> ++ clock-frequency = <400000>;
> ++ i2c-scl-falling-time-ns = <4>;
> ++ i2c-scl-rising-time-ns = <168>;
> ++ status = "okay";
> ++
> ++ rk808: pmic@1b {
> ++ compatible = "rockchip,rk808";
> ++ reg = <0x1b>;
> ++ #clock-cells = <1>;
> ++ clock-output-names = "xin32k", "rk808-clkout2";
> ++ interrupt-parent = <&gpio3>;
> ++ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&pmic_int_l_gpio>;
> ++ rockchip,system-power-controller;
> ++ wakeup-source;
> ++
> ++ vcc1-supply = <&vcc_sysin>;
> ++ vcc2-supply = <&vcc_sysin>;
> ++ vcc3-supply = <&vcc_sysin>;
> ++ vcc4-supply = <&vcc_sysin>;
> ++ vcc6-supply = <&vcc_sysin>;
> ++ vcc7-supply = <&vcc_sysin>;
> ++ vcc8-supply = <&vcc3v3_sys>;
> ++ vcc9-supply = <&vcc_sysin>;
> ++ vcc10-supply = <&vcc_sysin>;
> ++ vcc11-supply = <&vcc_sysin>;
> ++ vcc12-supply = <&vcc3v3_sys>;
> ++ vcc13-supply = <&vcc_sysin>;
> ++ vcc14-supply = <&vcc_sysin>;
> ++
> ++ regulators {
> ++ /* rk3399 center logic supply */
> ++ vdd_center: DCDC_REG1 {
> ++ regulator-name = "vdd_center";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <750000>;
> ++ regulator-max-microvolt = <1350000>;
> ++ regulator-ramp-delay = <6001>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vdd_cpu_l: DCDC_REG2 {
> ++ regulator-name = "vdd_cpu_l";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <750000>;
> ++ regulator-max-microvolt = <1350000>;
> ++ regulator-ramp-delay = <6001>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vcc_ddr: DCDC_REG3 {
> ++ regulator-name = "vcc_ddr";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ };
> ++ };
> ++
> ++ vcc_1v8: vcc_wl: DCDC_REG4 {
> ++ regulator-name = "vcc_1v8";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1800000>;
> ++ regulator-max-microvolt = <1800000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ regulator-suspend-microvolt = <1800000>;
> ++ };
> ++ };
> ++
> ++ /* not used */
> ++ LDO_REG1 {
> ++ };
> ++
> ++ /* not used */
> ++ LDO_REG2 {
> ++ };
> ++
> ++ vcc1v8_pmupll: LDO_REG3 {
> ++ regulator-name = "vcc1v8_pmupll";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1800000>;
> ++ regulator-max-microvolt = <1800000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ regulator-suspend-microvolt = <1800000>;
> ++ };
> ++ };
> ++
> ++ vcc_sdio: LDO_REG4 {
> ++ regulator-name = "vcc_sdio";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1800000>;
> ++ regulator-max-microvolt = <3000000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ regulator-suspend-microvolt = <3000000>;
> ++ };
> ++ };
> ++
> ++ vcca3v0_codec: LDO_REG5 {
> ++ regulator-name = "vcca3v0_codec";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <3000000>;
> ++ regulator-max-microvolt = <3000000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vcc_1v5: LDO_REG6 {
> ++ regulator-name = "vcc_1v5";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1500000>;
> ++ regulator-max-microvolt = <1500000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ regulator-suspend-microvolt = <1500000>;
> ++ };
> ++ };
> ++
> ++ vcca1v8_codec: LDO_REG7 {
> ++ regulator-name = "vcca1v8_codec";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <1800000>;
> ++ regulator-max-microvolt = <1800000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vcc_3v0: LDO_REG8 {
> ++ regulator-name = "vcc_3v0";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <3000000>;
> ++ regulator-max-microvolt = <3000000>;
> ++
> ++ regulator-state-mem {
> ++ regulator-on-in-suspend;
> ++ regulator-suspend-microvolt = <3000000>;
> ++ };
> ++ };
> ++
> ++ vcc3v3_s3: SWITCH_REG1 {
> ++ regulator-name = "vcc3v3_s3";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vcc3v3_s0: SWITCH_REG2 {
> ++ regulator-name = "vcc3v3_s0";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++ };
> ++ };
> ++
> ++ vdd_cpu_b: regulator@40 {
> ++ compatible = "silergy,syr827";
> ++ reg = <0x40>;
> ++ fcs,suspend-voltage-selector = <1>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&vsel1_gpio>;
> ++ regulator-name = "vdd_cpu_b";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <712500>;
> ++ regulator-max-microvolt = <1500000>;
> ++ regulator-ramp-delay = <1000>;
> ++ vin-supply = <&vcc_1v8>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++
> ++ vdd_gpu: regulator@41 {
> ++ compatible = "silergy,syr828";
> ++ reg = <0x41>;
> ++ fcs,suspend-voltage-selector = <1>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&vsel2_gpio>;
> ++ regulator-name = "vdd_gpu";
> ++ regulator-always-on;
> ++ regulator-boot-on;
> ++ regulator-min-microvolt = <712500>;
> ++ regulator-max-microvolt = <1500000>;
> ++ regulator-ramp-delay = <1000>;
> ++ vin-supply = <&vcc_1v8>;
> ++
> ++ regulator-state-mem {
> ++ regulator-off-in-suspend;
> ++ };
> ++ };
> ++};
> ++
> ++&i2c1 {
> ++ clock-frequency = <100000>;
> ++ i2c-scl-falling-time-ns = <4>;
> ++ i2c-scl-rising-time-ns = <168>;
> ++ status = "okay";
> ++
> ++ es8316: es8316@11 {
> ++ compatible = "everest,es8316";
> ++ reg = <0x11>;
> ++ clocks = <&cru SCLK_I2S_8CH_OUT>;
> ++ clock-names = "mclk";
> ++ #sound-dai-cells = <0>;
> ++ };
> ++};
> ++
> ++&i2c3 {
> ++ i2c-scl-falling-time-ns = <15>;
> ++ i2c-scl-rising-time-ns = <450>;
> ++ status = "okay";
> ++};
> ++
> ++&i2c4 {
> ++ i2c-scl-falling-time-ns = <20>;
> ++ i2c-scl-rising-time-ns = <600>;
> ++ status = "okay";
> ++
> ++ fusb0: fusb30x@22 {
> ++ compatible = "fcs,fusb302";
> ++ reg = <0x22>;
> ++ fcs,int_n = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&fusb0_int_gpio>;
> ++ vbus-supply = <&vbus_typec>;
> ++
> ++ connector {
> ++ compatible = "usb-c-connector";
> ++ data-role = "host";
> ++ label = "USB-C";
> ++ op-sink-microwatt = <1000000>;
> ++ power-role = "dual";
> ++ sink-pdos =
> ++ <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
> ++ source-pdos =
> ++ <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
> ++ try-power-role = "sink";
> ++
> ++ ports {
> ++ #address-cells = <1>;
> ++ #size-cells = <0>;
> ++
> ++ port@0 {
> ++ reg = <0>;
> ++
> ++ usbc_hs: endpoint {
> ++ remote-endpoint =
> ++ <&u2phy0_typec_hs>;
> ++ };
> ++ };
> ++
> ++ port@1 {
> ++ reg = <1>;
> ++
> ++ usbc_ss: endpoint {
> ++ remote-endpoint =
> ++ <&tcphy0_typec_ss>;
> ++ };
> ++ };
> ++
> ++ port@2 {
> ++ reg = <2>;
> ++
> ++ usbc_dp: endpoint {
> ++ remote-endpoint =
> ++ <&tcphy0_typec_dp>;
> ++ };
> ++ };
> ++ };
> ++ };
> ++ };
> ++};
> ++
> ++&i2s1 {
> ++ #sound-dai-cells = <0>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
> ++ rockchip,capture-channels = <8>;
> ++ rockchip,playback-channels = <8>;
> ++ status = "okay";
> ++};
> ++
> ++&io_domains {
> ++ audio-supply = <&vcc_3v0>;
> ++ gpio1830-supply = <&vcc_3v0>;
> ++ sdmmc-supply = <&vcc_sdio>;
> ++ status = "okay";
> ++};
> ++
> ++&pcie_phy {
> ++ status = "okay";
> ++};
> ++
> ++&pcie0 {
> ++ bus-scan-delay-ms = <1000>;
> ++ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
> ++ max-link-speed = <2>;
> ++ num-lanes = <4>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&pcie_clkreqn_cpm>;
> ++ vpcie0v9-supply = <&vcca0v9_s3>;
> ++ vpcie1v8-supply = <&vcca1v8_s3>;
> ++ vpcie3v3-supply = <&vcc3v3_ssd>;
> ++ status = "okay";
> ++};
> ++
> ++&pinctrl {
> ++ buttons {
> ++ pwrbtn_gpio: pwrbtn-gpio {
> ++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++
> ++ lidbtn_gpio: lidbtn-gpio {
> ++ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++ };
> ++
> ++ dc-charger {
> ++ dc_det_gpio: dc-det-gpio {
> ++ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++ };
> ++
> ++ es8316 {
> ++ hp_det_gpio: hp-det-gpio {
> ++ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
> ++ };
> ++ };
> ++
> ++ fusb302x {
> ++ fusb0_int_gpio: fusb0-int-gpio {
> ++ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++ };
> ++
> ++ i2s1 {
> ++ i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
> ++ rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
> ++ };
> ++ };
> ++
> ++ lcd-panel {
> ++ lcdvcc_en_gpio: lcdvcc-en-gpio {
> ++ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ panel_en_gpio: panel-en-gpio {
> ++ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ lcd_panel_reset_gpio: lcd-panel-reset-gpio {
> ++ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++ };
> ++
> ++ leds {
> ++ pwrled_gpio: pwrled_gpio {
> ++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ slpled_gpio: slpled_gpio {
> ++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++ };
> ++
> ++ pmic {
> ++ pmic_int_l_gpio: pmic-int-l-gpio {
> ++ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++
> ++ vsel1_gpio: vsel1-gpio {
> ++ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
> ++ };
> ++
> ++ vsel2_gpio: vsel2-gpio {
> ++ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
> ++ };
> ++ };
> ++
> ++ sdcard {
> ++ sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
> ++ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ };
> ++
> ++ sdio-pwrseq {
> ++ wifi_enable_h_gpio: wifi-enable-h-gpio {
> ++ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++ };
> ++
> ++ usb-typec {
> ++ vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
> ++ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
> ++ };
> ++ };
> ++
> ++ usb2 {
> ++ pwr_5v_gpio: pwr-5v-gpio {
> ++ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
> ++ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++ };
> ++
> ++ wireless-bluetooth {
> ++ bt_wake_gpio: bt-wake-gpio {
> ++ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ bt_host_wake_gpio: bt-host-wake-gpio {
> ++ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++
> ++ bt_reset_gpio: bt-reset-gpio {
> ++ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
> ++ };
> ++ };
> ++};
> ++
> ++&pmu_io_domains {
> ++ pmu1830-supply = <&vcc_3v0>;
> ++ status = "okay";
> ++};
> ++
> ++&pwm0 {
> ++ status = "okay";
> ++};
> ++
> ++&pwm2 {
> ++ status = "okay";
> ++};
> ++
> ++&saradc {
> ++ vref-supply = <&vcca1v8_s3>;
> ++ status = "okay";
> ++};
> ++
> ++&sdmmc {
> ++ bus-width = <4>;
> ++ cap-mmc-highspeed;
> ++ cap-sd-highspeed;
> ++ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
> ++ disable-wp;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
> ++ sd-uhs-sdr104;
> ++ vmmc-supply = <&vcc3v0_sd>;
> ++ vqmmc-supply = <&vcc_sdio>;
> ++ status = "okay";
> ++};
> ++
> ++&sdio0 {
> ++ bus-width = <4>;
> ++ cap-sd-highspeed;
> ++ cap-sdio-irq;
> ++ keep-power-in-suspend;
> ++ mmc-pwrseq = <&sdio_pwrseq>;
> ++ non-removable;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
> ++ sd-uhs-sdr104;
> ++ status = "okay";
> ++};
> ++
> ++&sdhci {
> ++ bus-width = <8>;
> ++ mmc-hs200-1_8v;
> ++ non-removable;
> ++ status = "okay";
> ++};
> ++
> ++&spi1 {
> ++ max-freq = <10000000>;
> ++ status = "okay";
> ++
> ++ spiflash: flash@0 {
> ++ compatible = "jedec,spi-nor";
> ++ reg = <0>;
> ++ m25p,fast-read;
> ++ spi-max-frequency = <10000000>;
> ++ };
> ++};
> ++
> ++&tcphy0 {
> ++ status = "okay";
> ++};
> ++
> ++&tcphy0_dp {
> ++ port {
> ++ tcphy0_typec_dp: endpoint {
> ++ remote-endpoint = <&usbc_dp>;
> ++ };
> ++ };
> ++};
> ++
> ++&tcphy0_usb3 {
> ++ port {
> ++ tcphy0_typec_ss: endpoint {
> ++ remote-endpoint = <&usbc_ss>;
> ++ };
> ++ };
> ++};
> ++
> ++&tcphy1 {
> ++ status = "okay";
> ++};
> ++
> ++&tsadc {
> ++ /* tshut mode 0:CRU 1:GPIO */
> ++ rockchip,hw-tshut-mode = <1>;
> ++ /* tshut polarity 0:LOW 1:HIGH */
> ++ rockchip,hw-tshut-polarity = <1>;
> ++ status = "okay";
> ++};
> ++
> ++&u2phy0 {
> ++ status = "okay";
> ++
> ++ u2phy0_otg: otg-port {
> ++ status = "okay";
> ++ };
> ++
> ++ u2phy0_host: host-port {
> ++ phy-supply = <&vcc5v0_otg>;
> ++ status = "okay";
> ++ };
> ++
> ++ port {
> ++ u2phy0_typec_hs: endpoint {
> ++ remote-endpoint = <&usbc_hs>;
> ++ };
> ++ };
> ++};
> ++
> ++&u2phy1 {
> ++ status = "okay";
> ++
> ++ u2phy1_otg: otg-port {
> ++ status = "okay";
> ++ };
> ++
> ++ u2phy1_host: host-port {
> ++ phy-supply = <&vcc5v0_otg>;
> ++ status = "okay";
> ++ };
> ++};
> ++
> ++&uart0 {
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
> ++ uart-has-rtscts;
> ++ status = "okay";
> ++
> ++ bluetooth {
> ++ compatible = "brcm,bcm4345c5";
> ++ clocks = <&rk808 1>;
> ++ clock-names = "lpo";
> ++ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
> ++ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
> ++ max-speed = <1500000>;
> ++ pinctrl-names = "default";
> ++ pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
> ++ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
> ++ vbat-supply = <&wifi_bat>;
> ++ vddio-supply = <&vcc_wl>;
> ++ };
> ++};
> ++
> ++&uart2 {
> ++ status = "okay";
> ++};
> ++
> ++&usb_host0_ehci {
> ++ status = "okay";
> ++};
> ++
> ++&usb_host0_ohci {
> ++ status = "okay";
> ++};
> ++
> ++&usb_host1_ehci {
> ++ status = "okay";
> ++};
> ++
> ++&usb_host1_ohci {
> ++ status = "okay";
> ++};
> ++
> ++&usbdrd3_0 {
> ++ status = "okay";
> ++};
> ++
> ++&usbdrd_dwc3_0 {
> ++ dr_mode = "host";
> ++ status = "okay";
> ++};
> ++
> ++&usbdrd3_1 {
> ++ status = "okay";
> ++};
> ++
> ++&usbdrd_dwc3_1 {
> ++ dr_mode = "host";
> ++ status = "okay";
> ++};
> ++
> ++&vopb {
> ++ status = "okay";
> ++};
> ++
> ++&vopb_mmu {
> ++ status = "okay";
> ++};
> ++
> ++&vopl {
> ++ status = "okay";
> ++};
> ++
> ++&vopl_mmu {
> ++ status = "okay";
> ++};
> +--
> +2.25.1
> +
> --
> 2.20.1
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 227 bytes --]
next prev parent reply other threads:[~2020-03-26 2:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 3:04 [bug#40218] linux-libre patch to support pinebook pro Vagrant Cascadian
2020-03-25 3:43 ` Vagrant Cascadian
2020-03-26 2:03 ` Vagrant Cascadian [this message]
2020-03-26 6:36 ` Jan Nieuwenhuizen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87o8sjkh2r.fsf@yucca \
--to=vagrant@debian.org \
--cc=40218-done@debbugs.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.