Vagrant Cascadian writes: > On 2021-06-29, Christopher Baines wrote: >> I've had a Honeycomb LX2 board for a few weeks now, but I've been >> struggling to get Guix installed on it. >> >> The most success I've had is with an installer image written to either a >> USB drive or nVME drive. I changed the bootloader to the >> grub-efi-bootloader, using the efi-raw image type, a couple of other >> tweaks, but I only get as far as Linux starting Guile and then it >> promptly erroring [1]. >> >> 1: https://paste.debian.net/plain/1202864 >> >> For some reason, /proc/partitions is empty, and I can't see usual things >> relating to storage devices in /dev. Any ideas how this could happen, >> what might I be doing wrong, or anything else I could try? > > Most likely missing kernel modules from the initrd, missing kernel > configuration options enabled, and/or missing support in the kernel > upstream... > > Hopefully it's one of the first two; good luck module/option hunting! Thanks for the tip, I think I've muddled through enabling relevant things in Linux to get past the partition problem at least. I've seemingly still got some problem getting in to the installer/getting a tty over the serial connection, but I'll send another email about that.