* Freely available Jami video-conference channel for those interested
@ 2021-11-20 5:04 Maxim Cournoyer
2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
` (3 more replies)
0 siblings, 4 replies; 9+ messages in thread
From: Maxim Cournoyer @ 2021-11-20 5:04 UTC (permalink / raw)
To: help-guix
Hello Guix,
Disclaimer: my employer is Savoir-faire Linux, which oversees the
development of Jami.
For a while, I've toyed with the idea that we could leverage Jami for
our video-conference needs, and contributed a jami-service-type a few
months ago to ease doing so [0].
A service is not strictly needed to setup a video-conferencing server
(later referred as a "rendezvous point") with Jami [1], it increases
availability and can be used without a normal user session. It also
provides some isolation from the main system since it runs in a separate
namespace (container), at least on Guix System.
The main challenges for a decent experience with the Jami rendezvous
point feature is its resource requirements; as the number of
participants grow, so does the required amount of network bandwidth and
CPU power.
As some kind of technology preview, I'd like to offer a freely available
Jami rendezvous point. Using either the jami-gnome or jami-qt client
available in Guix, you can connect to it by searching for the
'rdv-jami-guix' contact and initiating a call. Participants' audio and
video streams will automatically be mixed and streamed by the server.
On a Guix System, installing it to your user profile should suffice. On
a foreign distribution, you'll have to resort to a more complicated
launch procedure, thanks to D-Bus configuration [2]. Something like this
should work:
$ guix shell jami-gnome dbus glib gtk+ openssl nss-certs \
-- dbus-run-session jami-gnome
I hope it proves useful in fostering more live collaboration in the
community! Extra rendezvous points could also be deployed if needed.
If the experience is successful we could seek a better place to host
such service for the community (where it could be managed by the
collective of Guix sysadmins rather than myself for example).
Happy hacking,
Maxim
[0] https://git.savannah.gnu.org/cgit/guix.git/commit/?id=69dcc24c9f0cdfea674eb690e7755d26a25ced2b
[1] https://jami.net/help/#answer14
[2] https://issues.guix.gnu.org/48538
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-20 5:04 Freely available Jami video-conference channel for those interested Maxim Cournoyer
@ 2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
2021-11-21 2:49 ` Maxim Cournoyer
2021-11-21 20:39 ` Luis Felipe
` (2 subsequent siblings)
3 siblings, 1 reply; 9+ messages in thread
From: Jérémy Korwin-Zmijowski @ 2021-11-20 6:40 UTC (permalink / raw)
To: help-guix, Maxim Cournoyer, help-guix
This is very cool !
Congratulations for the work !
Jérémy
--
Envoyé de mon appareil Android avec Courriel K-9 Mail. Veuillez excuser ma brièveté.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
@ 2021-11-21 2:49 ` Maxim Cournoyer
0 siblings, 0 replies; 9+ messages in thread
From: Maxim Cournoyer @ 2021-11-21 2:49 UTC (permalink / raw)
To: Jérémy Korwin-Zmijowski; +Cc: help-guix
Hi,
Jérémy Korwin-Zmijowski <jeremy@korwin-zmijowski.fr> writes:
> This is very cool !
Thank you :-). It was a difficult service to tackle (with the D-Bus
requirement and D-Bus communication); I especially struggled with making
it rock solid in terms of being able to restart it without any glitch
(the test suite verifies this).
I hope it can be useful!
Maxim
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-20 5:04 Freely available Jami video-conference channel for those interested Maxim Cournoyer
2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
@ 2021-11-21 20:39 ` Luis Felipe
2021-11-21 21:39 ` zimoun
2021-11-22 23:29 ` zimoun
3 siblings, 0 replies; 9+ messages in thread
From: Luis Felipe @ 2021-11-21 20:39 UTC (permalink / raw)
To: Maxim Cournoyer; +Cc: help-guix
[-- Attachment #1.1: Type: text/plain, Size: 491 bytes --]
Hi, Maxim.
On Saturday, November 20th, 2021 at 5:04 AM, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
> As some kind of technology preview, I'd like to offer a freely available
>
> Jami rendezvous point. Using either the jami-gnome or jami-qt client
>
> available in Guix, you can connect to it by searching for the
>
> 'rdv-jami-guix' contact and initiating a call.
Thanks. I just added it to my contacts. I hope I can get a mic [and camera] soon to try it out.
[-- Attachment #1.2: publickey - luis.felipe.la@protonmail.com - 0x12DE1598.asc --]
[-- Type: application/pgp-keys, Size: 1815 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 509 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-20 5:04 Freely available Jami video-conference channel for those interested Maxim Cournoyer
2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
2021-11-21 20:39 ` Luis Felipe
@ 2021-11-21 21:39 ` zimoun
2021-11-22 23:29 ` zimoun
3 siblings, 0 replies; 9+ messages in thread
From: zimoun @ 2021-11-21 21:39 UTC (permalink / raw)
To: Maxim Cournoyer, help-guix
Hi Maxim,
Really cool! Thanks!
On Sat, 20 Nov 2021 at 00:04, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
> On a Guix System, installing it to your user profile should suffice. On
> a foreign distribution, you'll have to resort to a more complicated
> launch procedure, thanks to D-Bus configuration [2]. Something like this
> should work:
>
> $ guix shell jami-gnome dbus glib gtk+ openssl nss-certs \
> -- dbus-run-session jami-gnome
It seems to work like a charm. \o/
Thanks again for sharing this resource.
Cheers,
simon
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-20 5:04 Freely available Jami video-conference channel for those interested Maxim Cournoyer
` (2 preceding siblings ...)
2021-11-21 21:39 ` zimoun
@ 2021-11-22 23:29 ` zimoun
2021-11-23 2:14 ` Maxim Cournoyer
3 siblings, 1 reply; 9+ messages in thread
From: zimoun @ 2021-11-22 23:29 UTC (permalink / raw)
To: Maxim Cournoyer, help-guix
Hi Maxim,
On Sat, 20 Nov 2021 at 00:04, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
> $ guix shell jami-gnome dbus glib gtk+ openssl nss-certs \
> -- dbus-run-session jami-gnome
>
> I hope it proves useful in fostering more live collaboration in the
> community! Extra rendezvous points could also be deployed if needed.
> If the experience is successful we could seek a better place to host
> such service for the community (where it could be managed by the
> collective of Guix sysadmins rather than myself for example).
It works very well – on foreign distro at least. :-) We tried this
evening with Julien. Well, it is probably because long-distance, we
noticed a delay between sound and video.
I hope hack sessions will be organize soon. Ah, just for my
information, is it possible to share a screen or something?
Thanks for sharing this very useful resource.
Cheers,
simon
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-22 23:29 ` zimoun
@ 2021-11-23 2:14 ` Maxim Cournoyer
2021-11-23 12:06 ` zimoun
0 siblings, 1 reply; 9+ messages in thread
From: Maxim Cournoyer @ 2021-11-23 2:14 UTC (permalink / raw)
To: zimoun; +Cc: help-guix
Hello Simon,
zimoun <zimon.toutoune@gmail.com> writes:
> Hi Maxim,
>
> On Sat, 20 Nov 2021 at 00:04, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
>
>> $ guix shell jami-gnome dbus glib gtk+ openssl nss-certs \
>> -- dbus-run-session jami-gnome
>>
>> I hope it proves useful in fostering more live collaboration in the
>> community! Extra rendezvous points could also be deployed if needed.
>> If the experience is successful we could seek a better place to host
>> such service for the community (where it could be managed by the
>> collective of Guix sysadmins rather than myself for example).
>
> It works very well – on foreign distro at least. :-) We tried this
> evening with Julien. Well, it is probably because long-distance, we
> noticed a delay between sound and video.
Thanks for the feedback! I'm glad it worked OK. Audio and video
synchronization issues are relatively common in Jami (I'm guessing it's
a difficult problem!), especially on systems lacking video acceleration
(such as mine -- GPU vendors typically require binary blobs to drive
their video decoders). Where video acceleration is possible, I think it
takes care of the synchronization problem itself, which explains why it
often works better there.
> I hope hack sessions will be organize soon. Ah, just for my
> information, is it possible to share a screen or something?
Yes, both desktop clients (GNOME and Qt) support it.
> Thanks for sharing this very useful resource.
My pleasure! I'm happy to hear it may be put to good use!
Maxim
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-23 2:14 ` Maxim Cournoyer
@ 2021-11-23 12:06 ` zimoun
2021-11-23 21:28 ` Maxim Cournoyer
0 siblings, 1 reply; 9+ messages in thread
From: zimoun @ 2021-11-23 12:06 UTC (permalink / raw)
To: Maxim Cournoyer; +Cc: help-guix
Hi Maxim,
On Mon, 22 Nov 2021 at 21:14, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
>> I hope hack sessions will be organize soon. Ah, just for my
>> information, is it possible to share a screen or something?
>
> Yes, both desktop clients (GNOME and Qt) support it.
Ah yeah, right-click on the video call screen. It was not obvious. :-)
I was expecting a button bottom. ;-)
Thanks,
simon
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Freely available Jami video-conference channel for those interested
2021-11-23 12:06 ` zimoun
@ 2021-11-23 21:28 ` Maxim Cournoyer
0 siblings, 0 replies; 9+ messages in thread
From: Maxim Cournoyer @ 2021-11-23 21:28 UTC (permalink / raw)
To: zimoun; +Cc: help-guix
Hi Simon,
zimoun <zimon.toutoune@gmail.com> writes:
> Hi Maxim,
>
> On Mon, 22 Nov 2021 at 21:14, Maxim Cournoyer <maxim.cournoyer@gmail.com> wrote:
>
>>> I hope hack sessions will be organize soon. Ah, just for my
>>> information, is it possible to share a screen or something?
>>
>> Yes, both desktop clients (GNOME and Qt) support it.
>
> Ah yeah, right-click on the video call screen. It was not obvious. :-)
> I was expecting a button bottom. ;-)
The UI is decidedly not without its quirks, especially the GNOME client.
jami-qt on the other hand (which is to become the flagship Jami client)
has had the attention of a professional UI designer so it is more
intuitive and polished in my opinion.
Happy conferencing ;-)
Maxim
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-11-23 21:28 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-20 5:04 Freely available Jami video-conference channel for those interested Maxim Cournoyer
2021-11-20 6:40 ` Jérémy Korwin-Zmijowski
2021-11-21 2:49 ` Maxim Cournoyer
2021-11-21 20:39 ` Luis Felipe
2021-11-21 21:39 ` zimoun
2021-11-22 23:29 ` zimoun
2021-11-23 2:14 ` Maxim Cournoyer
2021-11-23 12:06 ` zimoun
2021-11-23 21:28 ` Maxim Cournoyer
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.