From: taylanbayirli@gmail.com (Taylan Ulrich Bayırlı/Kammer)
To: guix-devel@gnu.org
Subject: [PATCHES] Add recode, enca.
Date: Wed, 04 Mar 2015 22:55:01 +0100 [thread overview]
Message-ID: <87bnk8e8cq.fsf@taylan.uni.cx> (raw)
[-- Attachment #1: Type: text/plain, Size: 294 bytes --]
Is it fine to put these in a new file called encoding.scm?
In the first one, I couldn't figure out how to make the test suite run,
which uses a setup.py file to compile a small program, which fails with
"ld: cannot find -lrecode" (where recode is the library being tested).
Any help welcome.
[-- Attachment #2: patch1 --]
[-- Type: text/x-diff, Size: 3627 bytes --]
From 7f56201d97209986a9813fdd5040feee8bfe2b56 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Taylan=20Ulrich=20Bay=C4=B1rl=C4=B1/Kammer?=
<taylanbayirli@gmail.com>
Date: Wed, 4 Mar 2015 22:34:13 +0100
Subject: [PATCH 1/5] gnu: Add recode.
* gnu/packages/encoding.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
---
gnu-system.am | 1 +
gnu/packages/encoding.scm | 55 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+)
create mode 100644 gnu/packages/encoding.scm
diff --git a/gnu-system.am b/gnu-system.am
index e78d6a5..46a3a42 100644
--- a/gnu-system.am
+++ b/gnu-system.am
@@ -90,6 +90,7 @@ GNU_SYSTEM_MODULES = \
gnu/packages/elf.scm \
gnu/packages/emacs.scm \
gnu/packages/enchant.scm \
+ gnu/packages/encoding.scm \
gnu/packages/enlightenment.scm \
gnu/packages/feh.scm \
gnu/packages/file.scm \
diff --git a/gnu/packages/encoding.scm b/gnu/packages/encoding.scm
new file mode 100644
index 0000000..9913e96
--- /dev/null
+++ b/gnu/packages/encoding.scm
@@ -0,0 +1,55 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2015 Taylan Ulrich Bayırlı/Kammer <taylanbayirli@gmail.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix. If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (gnu packages encoding)
+ #:use-module ((guix licenses) #:prefix license:)
+ #:use-module (guix packages)
+ #:use-module (guix download)
+ #:use-module (guix git-download)
+ #:use-module (guix build-system gnu)
+ #:use-module (gnu packages python))
+
+(define-public recode
+ (package
+ (name "recode")
+ ;; Last beta release (3.7-beta2) is from 2008; last commit from Feb 2014.
+ ;; So we use that commit instead.
+ (version "3.7.0.201402")
+ (source
+ (origin
+ (method git-fetch)
+ (uri (git-reference
+ (url "http://github.com/pinard/Recode.git")
+ (commit "2d7092a9999194fc0e9449717a8048c8d8e26c18")))
+ (sha256
+ (base32 "1wssv8z6g3ryrw33sksz4rjhlnhgvvdqszw1ggl4rcwks34n86zm"))))
+ (build-system gnu-build-system)
+ (native-inputs `(("python" ,python-2)))
+ (arguments
+ ;; Test-suite uses a setup.py file to compile a file, which then
+ ;; complains "ld: cannot find -lrecode".
+ '(#:tests? #f))
+ (home-page "https://github.com/pinard/Recode")
+ (synopsis "Text encoding converter")
+ (description "The Recode library converts files between character sets and
+usages. It recognises or produces over 200 different character sets (or about
+300 if combined with an iconv library) and transliterates files between almost
+any pair. When exact transliteration are not possible, it gets rid of
+offending characters or falls back on approximations. The recode program is a
+handy front-end to the library.")
+ (license (list license:gpl2+ license:lgpl2.1+))))
--
2.2.1
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: patch2 --]
[-- Type: text/x-diff, Size: 1553 bytes --]
From 440acf1194e3105bd386b28eff92a9aeed25ace1 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Taylan=20Ulrich=20Bay=C4=B1rl=C4=B1/Kammer?=
<taylanbayirli@gmail.com>
Date: Wed, 4 Mar 2015 22:35:15 +0100
Subject: [PATCH 2/5] gnu: Add enca.
* gnu/packages/encoding.scm (enca): New variable.
---
gnu/packages/encoding.scm | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/gnu/packages/encoding.scm b/gnu/packages/encoding.scm
index 9913e96..6b9ccb0 100644
--- a/gnu/packages/encoding.scm
+++ b/gnu/packages/encoding.scm
@@ -53,3 +53,23 @@ any pair. When exact transliteration are not possible, it gets rid of
offending characters or falls back on approximations. The recode program is a
handy front-end to the library.")
(license (list license:gpl2+ license:lgpl2.1+))))
+
+(define-public enca
+ (package
+ (name "enca")
+ (version "1.16")
+ (source
+ (origin
+ (method url-fetch)
+ (uri (string-append
+ "https://github.com/nijel/enca/archive/" version ".tar.gz"))
+ (sha256
+ (base32 "1xik00x0yvhswsw2isnclabhv536xk1s42cf5z54gfbpbhc7ni8l"))))
+ (build-system gnu-build-system)
+ (inputs `(("recode" ,recode)))
+ (home-page "https://github.com/nijel/enca")
+ (synopsis "Text encoding detection tool")
+ (description "Enca (Extremely Naive Charset Analyser) consists of libenca,
+an encoding detection library, and enca, a command line frontend, integrating
+libenca and several charset conversion libraries and tools.")
+ (license license:gpl2)))
--
2.2.1
next reply other threads:[~2015-03-04 21:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-04 21:55 Taylan Ulrich Bayırlı/Kammer [this message]
2015-03-06 22:03 ` [PATCHES] Add recode, enca Andreas Enge
2015-03-07 12:54 ` Taylan Ulrich Bayırlı/Kammer
2015-03-08 21:19 ` Ludovic Courtès
2015-03-09 13:47 ` Taylan Ulrich Bayırlı/Kammer
2015-03-09 20:19 ` Ludovic Courtès
2015-03-09 21:47 ` Taylan Ulrich Bayırlı/Kammer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bnk8e8cq.fsf@taylan.uni.cx \
--to=taylanbayirli@gmail.com \
--cc=guix-devel@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.