* bug#53415: binutils-mesboot1-2.14 configure phase fails, In procedure stat: No such file or directory: "config.status"
@ 2022-01-21 17:00 Christopher Baines
2022-01-25 22:42 ` Ludovic Courtès
0 siblings, 1 reply; 3+ messages in thread
From: Christopher Baines @ 2022-01-21 17:00 UTC (permalink / raw)
To: 53415
I've seen this failure consistently on one of the machines behind
bordeaux.guix.gnu.org, you can see the full logs via following the "View
build" links here [1].
1: http://data.guix.gnu.org/gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv
I've tried building multiple times on the machine where the failures
occurred, and it's not once succeeded.
From looking at the kept build directory, the config.status file doesn't
exist. There is config.status.VX1nZz, but it's empty.
starting phase `configure'
running ./configure --disable-nls --disable-shared --disable-werror --build=i686-unknown-linux-gnu --host=i686-unknown-linux-gnu --with-sysroot=/ --prefix=/gnu/store/gvmha2v54svwzxigcbap8862rg3fya0w-binutils-mesboot1-2.14
error: in phase 'configure': uncaught exception:
system-error "stat" "~A: ~S" ("No such file or directory" "config.status") (2)
phase `configure' failed after 0.0 seconds
Backtrace:
In ice-9/boot-9.scm:
157: 16 [catch #t #<catch-closure c93c40> ...]
In unknown file:
?: 15 [apply-smob/1 #<catch-closure c93c40>]
In ice-9/boot-9.scm:
63: 14 [call-with-prompt prompt0 ...]
In ice-9/eval.scm:
432: 13 [eval # #]
In ice-9/boot-9.scm:
2320: 12 [save-module-excursion #<procedure cc1b00 at ice-9/boot-9.scm:3961:3 ()>]
3966: 11 [#<procedure cc1b00 at ice-9/boot-9.scm:3961:3 ()>]
1645: 10 [%start-stack load-stack #<procedure cc2ba0 at ice-9/boot-9.scm:3957:10 ()>]
1650: 9 [#<procedure cc8db0 ()>]
In unknown file:
?: 8 [primitive-load "/gnu/store/6i3748r9if4cnjz1bmzh2ghbp0zlv232-binutils-mesboot1-2.14-builder"]
In ice-9/boot-9.scm:
157: 7 [catch srfi-34 ...]
In srfi/srfi-1.scm:
616: 6 [for-each #<procedure 11a5f60 at guix/build/gnu-build-system.scm:911:14 (expr)> ...]
In ice-9/boot-9.scm:
171: 5 [with-throw-handler #t ...]
In guix/build/gnu-build-system.scm:
927: 4 [#<procedure 177ce00 at guix/build/gnu-build-system.scm:926:21 ()>]
In ice-9/eval.scm:
432: 3 [eval # #]
In guix/build/utils.scm:
844: 2 [with-atomic-file-replacement "config.status" ...]
In unknown file:
?: 1 [stat "config.status" #<undefined>]
In ice-9/boot-9.scm:
106: 0 [#<procedure 177cdc0 at ice-9/boot-9.scm:97:6 (thrown-k . args)> system-error ...]
ice-9/boot-9.scm:106:20: In procedure #<procedure 177cdc0 at ice-9/boot-9.scm:97:6 (thrown-k . args)>:
ice-9/boot-9.scm:106:20: In procedure stat: No such file or directory: "config.status"
builder for `/gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv' failed with exit code 1
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#53415: binutils-mesboot1-2.14 configure phase fails, In procedure stat: No such file or directory: "config.status"
2022-01-21 17:00 bug#53415: binutils-mesboot1-2.14 configure phase fails, In procedure stat: No such file or directory: "config.status" Christopher Baines
@ 2022-01-25 22:42 ` Ludovic Courtès
2022-01-31 19:38 ` Christopher Baines
0 siblings, 1 reply; 3+ messages in thread
From: Ludovic Courtès @ 2022-01-25 22:42 UTC (permalink / raw)
To: Christopher Baines; +Cc: 53415
Hi,
Christopher Baines <mail@cbaines.net> skribis:
> I've seen this failure consistently on one of the machines behind
> bordeaux.guix.gnu.org, you can see the full logs via following the "View
> build" links here [1].
>
> 1: http://data.guix.gnu.org/gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv
>
> I've tried building multiple times on the machine where the failures
> occurred, and it's not once succeeded.
>
>>From looking at the kept build directory, the config.status file doesn't
> exist. There is config.status.VX1nZz, but it's empty.
>
>
>
> starting phase `configure'
> running ./configure --disable-nls --disable-shared --disable-werror --build=i686-unknown-linux-gnu --host=i686-unknown-linux-gnu --with-sysroot=/ --prefix=/gnu/store/gvmha2v54svwzxigcbap8862rg3fya0w-binutils-mesboot1-2.14
> error: in phase 'configure': uncaught exception:
> system-error "stat" "~A: ~S" ("No such file or directory" "config.status") (2)
> phase `configure' failed after 0.0 seconds
I just tried this on my laptop:
guix build \
/gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv \
--check
and the ‘configure’ phase completes without problems. I have:
--8<---------------cut here---------------start------------->8---
$ uname -srv
Linux 5.15.12-gnu #1 SMP 1
--8<---------------cut here---------------end--------------->8---
This reminds me of:
https://issues.guix.gnu.org/49985
https://issues.guix.gnu.org/45165
Could it be something with the kernel options, as discussed at
<https://issues.guix.gnu.org/45165#16>?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#53415: binutils-mesboot1-2.14 configure phase fails, In procedure stat: No such file or directory: "config.status"
2022-01-25 22:42 ` Ludovic Courtès
@ 2022-01-31 19:38 ` Christopher Baines
0 siblings, 0 replies; 3+ messages in thread
From: Christopher Baines @ 2022-01-31 19:38 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 53415
[-- Attachment #1.1: Type: text/plain, Size: 2386 bytes --]
Ludovic Courtès <ludo@gnu.org> writes:
> Hi,
>
> Christopher Baines <mail@cbaines.net> skribis:
>
>> I've seen this failure consistently on one of the machines behind
>> bordeaux.guix.gnu.org, you can see the full logs via following the "View
>> build" links here [1].
>>
>> 1: http://data.guix.gnu.org/gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv
>>
>> I've tried building multiple times on the machine where the failures
>> occurred, and it's not once succeeded.
>>
>>>From looking at the kept build directory, the config.status file doesn't
>> exist. There is config.status.VX1nZz, but it's empty.
>>
>>
>>
>> starting phase `configure'
>> running ./configure --disable-nls --disable-shared --disable-werror
>> --build=i686-unknown-linux-gnu --host=i686-unknown-linux-gnu
>> --with-sysroot=/
>> --prefix=/gnu/store/gvmha2v54svwzxigcbap8862rg3fya0w-binutils-mesboot1-2.14
>> error: in phase 'configure': uncaught exception:
>> system-error "stat" "~A: ~S" ("No such file or directory" "config.status") (2)
>> phase `configure' failed after 0.0 seconds
>
> I just tried this on my laptop:
>
> guix build \
> /gnu/store/xd8rnmr0k3fhfhilzi66hnggsnx67d5i-binutils-mesboot1-2.14.drv \
> --check
>
> and the ‘configure’ phase completes without problems. I have:
>
> $ uname -srv
> Linux 5.15.12-gnu #1 SMP 1
>
> This reminds me of:
>
> https://issues.guix.gnu.org/49985
> https://issues.guix.gnu.org/45165
>
> Could it be something with the kernel options, as discussed at
> <https://issues.guix.gnu.org/45165#16>?
I was on the following Linux from Guix revision
fe58f05b2482fd45c41fe324ac0d393093dc163e:
Linux 5.15.13-gnu #1 SMP 1
I've tried reconfiguring with f8633a739511e8d5bef93b18b346efb69b91ac8e
which provides Linux 5.15.12, but I see the same behaviour.
Looking at the successful build log, I've realised that the ./configure
script is probably crashing, not producing the config.status file, which
is causing the exception seen.
I've tried stracing everything, and attached the portion from around
where ./configure starts, to the Guile exception for the end of the
build.
I did notice some suspicious looking bits like the following:
stat("/tmp/guix-build-binutils-mesboot1-2.14.drv-0", 0xffffd058) = -1 EOVERFLOW (Value too large for defined data type)
[-- Attachment #1.2: binutils-mesboot1-strace --]
[-- Type: text/plain, Size: 21661 bytes --]
502 write(2, "running ./configure --disable-nl"..., 222 <unfinished ...>
500 <... read resumed>"starting phase `configure'\n", 4096) = 27
502 <... write resumed>) = 222
502 rt_sigaction(SIGINT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, <unfinished ...>
500 write(4, "gmlo\0\0\0\0.\0\0\0\0\0\0\0@ build-log 502 "..., 64 <unfinished ...>
502 <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, 8) = 0
502 rt_sigaction(SIGQUIT, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, <unfinished ...>
500 <... write resumed>) = 64
502 <... rt_sigaction resumed>{sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, 8) = 0
500 pselect6(13, [12], NULL, NULL, {tv_sec=43200, tv_nsec=0}, NULL <unfinished ...>
502 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD <unfinished ...>
500 <... pselect6 resumed>) = 1 (in [12], left {tv_sec=43199, tv_nsec=999995669})
500 read(12, "running ./configure --disable-nl"..., 4096) = 222
500 write(4, "gmlo\0\0\0\0\362\0\0\0\0\0\0\0@ build-log 502 "..., 264) = 264
500 pselect6(13, [12], NULL, NULL, {tv_sec=43200, tv_nsec=0}, NULL <unfinished ...>
515 set_robust_list(0xa2eb60, 24 <unfinished ...>
502 <... clone resumed>, child_tidptr=0xa2eb50) = 14
515 <... set_robust_list resumed>) = 0
515 execve("./configure", ["./configure", "--disable-nls", "--disable-shared", "--disable-werror", "--build=i686-unknown-linux-gnu", "--host=i686-unknown-linux-gnu", "--with-sysroot=/", "--prefix=/gnu/store/gvmha2v54svw"...], 0x1467930 /* 19 vars */ <unfinished ...>
502 wait4(14, <unfinished ...>
515 <... execve resumed>) = 0
515 [ Process PID=515 runs in 32 bit mode. ]
515 open("/dev/tty", O_RDWR) = -1 ENXIO (No such device or address)
515 ioctl(0, TCGETS, 0xffffd180) = -1 ENOTTY (Inappropriate ioctl for device)
515 brk(NULL) = 0x80b6000
515 brk(0x80b6002) = 0x80b6002
515 getuid() = 999
515 getgid() = 30000
515 geteuid() = 999
515 getegid() = 30000
515 brk(0x80b6049) = 0x80b6049
515 time(NULL) = 1643658451 (2022-01-31T19:47:31+0000)
515 brk(0x80b6139) = 0x80b6139
515 brk(0x80b6229) = 0x80b6229
515 sigprocmask(SIG_BLOCK, NULL, []) = 0
515 brk(0x80b6231) = 0x80b6231
515 brk(0x80b623d) = 0x80b623d
515 brk(0x80b6249) = 0x80b6249
515 brk(0x80b6261) = 0x80b6261
515 brk(0x80b626d) = 0x80b626d
515 brk(0x80b636d) = 0x80b636d
515 brk(0x80b6379) = 0x80b6379
515 brk(0x80b6479) = 0x80b6479
515 brk(0x80b6495) = 0x80b6495
515 brk(0x80b64b0) = 0x80b64b0
515 brk(0x80b64cb) = 0x80b64cb
515 brk(0x80b64df) = 0x80b64df
515 brk(0x80b6534) = 0x80b6534
515 brk(0x80b65a4) = 0x80b65a4
515 brk(0x80b65c0) = 0x80b65c0
515 brk(0x80b65c7) = 0x80b65c7
515 brk(0x80b65ce) = 0x80b65ce
515 brk(0x80b65e2) = 0x80b65e2
515 brk(0x80b660f) = 0x80b660f
515 brk(0x80b6643) = 0x80b6643
515 brk(0x80b665f) = 0x80b665f
515 brk(0x80b6664) = 0x80b6664
515 brk(0x80b6669) = 0x80b6669
515 brk(0x80b667d) = 0x80b667d
515 brk(0x80b66aa) = 0x80b66aa
515 brk(0x80b66dc) = 0x80b66dc
515 brk(0x80b66f8) = 0x80b66f8
515 brk(0x80b6702) = 0x80b6702
515 brk(0x80b670c) = 0x80b670c
515 brk(0x80b6720) = 0x80b6720
515 brk(0x80b672b) = 0x80b672b
515 brk(0x80b6740) = 0x80b6740
515 brk(0x80b675c) = 0x80b675c
515 brk(0x80b6761) = 0x80b6761
515 brk(0x80b6766) = 0x80b6766
515 brk(0x80b677a) = 0x80b677a
515 brk(0x80b6b6c) = 0x80b6b6c
515 brk(0x80b6f63) = 0x80b6f63
515 brk(0x80b6f7f) = 0x80b6f7f
515 brk(0x80b6f87) = 0x80b6f87
515 brk(0x80b6f8f) = 0x80b6f8f
515 brk(0x80b6fa3) = 0x80b6fa3
515 brk(0x80b6fd0) = 0x80b6fd0
515 brk(0x80b7005) = 0x80b7005
515 brk(0x80b7021) = 0x80b7021
515 brk(0x80b702f) = 0x80b702f
515 brk(0x80b703d) = 0x80b703d
515 brk(0x80b7051) = 0x80b7051
515 brk(0x80b707e) = 0x80b707e
515 brk(0x80b70b9) = 0x80b70b9
515 brk(0x80b70d5) = 0x80b70d5
515 brk(0x80b70d9) = 0x80b70d9
515 brk(0x80b70dd) = 0x80b70dd
515 brk(0x80b70f1) = 0x80b70f1
515 brk(0x80b711e) = 0x80b711e
515 brk(0x80b714f) = 0x80b714f
515 brk(0x80b716b) = 0x80b716b
515 brk(0x80b716f) = 0x80b716f
515 brk(0x80b7173) = 0x80b7173
515 brk(0x80b7187) = 0x80b7187
515 brk(0x80b71ca) = 0x80b71ca
515 brk(0x80b7211) = 0x80b7211
515 brk(0x80b722d) = 0x80b722d
515 brk(0x80b7233) = 0x80b7233
515 brk(0x80b7239) = 0x80b7239
515 brk(0x80b724d) = 0x80b724d
515 brk(0x80b724f) = 0x80b724f
515 brk(0x80b7257) = 0x80b7257
515 brk(0x80b7273) = 0x80b7273
515 brk(0x80b7278) = 0x80b7278
515 brk(0x80b727d) = 0x80b727d
515 brk(0x80b7291) = 0x80b7291
515 brk(0x80b72a3) = 0x80b72a3
515 brk(0x80b72ba) = 0x80b72ba
515 brk(0x80b72d6) = 0x80b72d6
515 brk(0x80b72e8) = 0x80b72e8
515 brk(0x80b72fa) = 0x80b72fa
515 brk(0x80b730e) = 0x80b730e
515 brk(0x80b735e) = 0x80b735e
515 brk(0x80b73c0) = 0x80b73c0
515 brk(0x80b73dc) = 0x80b73dc
515 brk(0x80b73e0) = 0x80b73e0
515 brk(0x80b73e4) = 0x80b73e4
515 brk(0x80b73f8) = 0x80b73f8
515 brk(0x80b7425) = 0x80b7425
515 brk(0x80b7456) = 0x80b7456
515 brk(0x80b7472) = 0x80b7472
515 brk(0x80b7482) = 0x80b7482
515 brk(0x80b7492) = 0x80b7492
515 brk(0x80b74a6) = 0x80b74a6
515 brk(0x80b74a8) = 0x80b74a8
515 brk(0x80b74ba) = 0x80b74ba
515 brk(0x80b74d6) = 0x80b74d6
515 brk(0x80b74e8) = 0x80b74e8
515 brk(0x80b74fa) = 0x80b74fa
515 brk(0x80b750e) = 0x80b750e
515 brk(0x80b7510) = 0x80b7510
515 brk(0x80b7524) = 0x80b7524
515 brk(0x80b7540) = 0x80b7540
515 brk(0x80b7561) = 0x80b7561
515 brk(0x80b7582) = 0x80b7582
515 brk(0x80b7596) = 0x80b7596
515 brk(0x80b7599) = 0x80b7599
515 brk(0x80b75bd) = 0x80b75bd
515 brk(0x80b75d9) = 0x80b75d9
515 brk(0x80b75e8) = 0x80b75e8
515 brk(0x80b75f7) = 0x80b75f7
515 brk(0x80b760b) = 0x80b760b
515 brk(0x80b77f5) = 0x80b77f5
515 brk(0x80b79ee) = 0x80b79ee
515 brk(0x80b7a0a) = 0x80b7a0a
515 brk(0x80b7a17) = 0x80b7a17
515 brk(0x80b7a24) = 0x80b7a24
515 brk(0x80b7a38) = 0x80b7a38
515 brk(0x80b7c50) = 0x80b7c50
515 brk(0x80b7e75) = 0x80b7e75
515 brk(0x80b7e91) = 0x80b7e91
515 brk(0x80b7e9e) = 0x80b7e9e
515 brk(0x80b7eab) = 0x80b7eab
515 brk(0x80b7ebf) = 0x80b7ebf
515 brk(0x80b7f08) = 0x80b7f08
515 brk(0x80b7f5e) = 0x80b7f5e
515 stat("/tmp/guix-build-binutils-mesboot1-2.14.drv-0", 0xffffd058) = -1 EOVERFLOW (Value too large for defined data type)
515 brk(0x80b835e) = 0x80b835e
515 getcwd("/tmp/guix-build-binutils-mesboot1-2.14.drv-0/binutils-2.14", 1024) = 59
515 brk(0x80b8399) = 0x80b8399
515 brk(0x80b83d4) = 0x80b83d4
515 brk(0x80b83f0) = 0x80b83f0
515 brk(0x80b83f7) = 0x80b83f7
515 brk(0x80b83fe) = 0x80b83fe
515 brk(0x80b8412) = 0x80b8412
515 brk(0x80b842e) = 0x80b842e
515 brk(0x80b8430) = 0x80b8430
515 brk(0x80b8432) = 0x80b8432
515 brk(0x80b8446) = 0x80b8446
515 brk(0x80b848d) = 0x80b848d
515 getpid() = 14
515 brk(0x80b84a9) = 0x80b84a9
515 brk(0x80b84ae) = 0x80b84ae
515 brk(0x80b84b3) = 0x80b84b3
515 brk(0x80b84c7) = 0x80b84c7
515 brk(0x80b84cc) = 0x80b84cc
515 brk(0x80b84e8) = 0x80b84e8
515 brk(0x80b84ec) = 0x80b84ec
515 brk(0x80b84f0) = 0x80b84f0
515 brk(0x80b8504) = 0x80b8504
515 brk(0x80b8507) = 0x80b8507
515 brk(0x80b8523) = 0x80b8523
515 brk(0x80b8527) = 0x80b8527
515 brk(0x80b852b) = 0x80b852b
515 brk(0x80b853f) = 0x80b853f
515 brk(0x80b8543) = 0x80b8543
515 brk(0x80b855f) = 0x80b855f
515 brk(0x80b8568) = 0x80b8568
515 brk(0x80b8571) = 0x80b8571
515 brk(0x80b8585) = 0x80b8585
515 brk(0x80b858a) = 0x80b858a
515 brk(0x80b85a6) = 0x80b85a6
515 brk(0x80b85ad) = 0x80b85ad
515 brk(0x80b85b4) = 0x80b85b4
515 brk(0x80b85c8) = 0x80b85c8
515 brk(0x80b85d2) = 0x80b85d2
515 brk(0x80b85ee) = 0x80b85ee
515 brk(0x80b85f7) = 0x80b85f7
515 brk(0x80b8600) = 0x80b8600
515 brk(0x80b8614) = 0x80b8614
515 brk(0x80b862b) = 0x80b862b
515 brk(0x80b8647) = 0x80b8647
515 brk(0x80b8650) = 0x80b8650
515 brk(0x80b8659) = 0x80b8659
515 brk(0x80b866d) = 0x80b866d
515 brk(0x80b8675) = 0x80b8675
515 brk(0x80b8677) = 0x80b8677
515 getppid() = 1
515 brk(0x80b8693) = 0x80b8693
515 brk(0x80b8698) = 0x80b8698
515 brk(0x80b869d) = 0x80b869d
515 brk(0x80b86b1) = 0x80b86b1
515 brk(0x80b86b3) = 0x80b86b3
515 brk(0x80b86cf) = 0x80b86cf
515 brk(0x80b86d6) = 0x80b86d6
515 brk(0x80b86dd) = 0x80b86dd
515 brk(0x80b86f1) = 0x80b86f1
515 brk(0x80b86f3) = 0x80b86f3
515 brk(0x80b870f) = 0x80b870f
515 brk(0x80b8716) = 0x80b8716
515 brk(0x80b871d) = 0x80b871d
515 brk(0x80b8731) = 0x80b8731
515 brk(0x80b8733) = 0x80b8733
515 brk(0x80b877a) = 0x80b877a
515 brk(0x80b8796) = 0x80b8796
515 brk(0x80b879b) = 0x80b879b
515 brk(0x80b87a0) = 0x80b87a0
515 brk(0x80b87b4) = 0x80b87b4
515 brk(0x80b87fb) = 0x80b87fb
515 brk(0x80b8800) = 0x80b8800
515 brk(0x80b8808) = 0x80b8808
515 brk(0x80b880e) = 0x80b880e
515 brk(0x80b882a) = 0x80b882a
515 brk(0x80b8830) = 0x80b8830
515 brk(0x80b8836) = 0x80b8836
515 brk(0x80b884a) = 0x80b884a
515 brk(0x80b8852) = 0x80b8852
515 brk(0x80b886e) = 0x80b886e
515 brk(0x80b887b) = 0x80b887b
515 brk(0x80b8888) = 0x80b8888
515 brk(0x80b889c) = 0x80b889c
515 brk(0x80b88af) = 0x80b88af
515 brk(0x80b88cb) = 0x80b88cb
515 brk(0x80b88d9) = 0x80b88d9
515 brk(0x80b88e7) = 0x80b88e7
515 brk(0x80b88fb) = 0x80b88fb
515 brk(0x80b890b) = 0x80b890b
515 brk(0x80b891b) = 0x80b891b
515 brk(0x80b892b) = 0x80b892b
515 brk(0x80b892d) = 0x80b892d
515 brk(0x80b893d) = 0x80b893d
515 brk(0x80b8941) = 0x80b8941
515 brk(0x80b8951) = 0x80b8951
515 brk(0x80b8953) = 0x80b8953
515 brk(0x80b8963) = 0x80b8963
515 brk(0x80b8965) = 0x80b8965
515 brk(0x80b8975) = 0x80b8975
515 brk(0x80b897d) = 0x80b897d
515 brk(0x80b898d) = 0x80b898d
515 brk(0x80b89a4) = 0x80b89a4
515 brk(0x80b89c0) = 0x80b89c0
515 brk(0x80b89c4) = 0x80b89c4
515 brk(0x80b89c8) = 0x80b89c8
515 brk(0x80b89dc) = 0x80b89dc
515 brk(0x80b89e0) = 0x80b89e0
515 brk(0x80b89fc) = 0x80b89fc
515 brk(0x80b8a01) = 0x80b8a01
515 brk(0x80b8a06) = 0x80b8a06
515 brk(0x80b8a1a) = 0x80b8a1a
515 brk(0x80b8a1e) = 0x80b8a1e
515 brk(0x80b8a3a) = 0x80b8a3a
515 brk(0x80b8a42) = 0x80b8a42
515 brk(0x80b8a4a) = 0x80b8a4a
515 brk(0x80b8a5e) = 0x80b8a5e
515 brk(0x80b8a7a) = 0x80b8a7a
515 brk(0x80b8a81) = 0x80b8a81
515 brk(0x80b8a88) = 0x80b8a88
515 brk(0x80b8a9c) = 0x80b8a9c
515 brk(0x80b8ab8) = 0x80b8ab8
515 brk(0x80b8abf) = 0x80b8abf
515 brk(0x80b8ac6) = 0x80b8ac6
515 brk(0x80b8ada) = 0x80b8ada
515 brk(0x80b8af6) = 0x80b8af6
515 brk(0x80b8afe) = 0x80b8afe
515 brk(0x80b8b06) = 0x80b8b06
515 brk(0x80b8b1a) = 0x80b8b1a
515 brk(0x80b8b36) = 0x80b8b36
515 brk(0x80b8b3f) = 0x80b8b3f
515 brk(0x80b8b48) = 0x80b8b48
515 brk(0x80b8b5c) = 0x80b8b5c
515 brk(0x80b8b6c) = 0x80b8b6c
515 brk(0x80b8b7c) = 0x80b8b7c
515 brk(0x80b8b98) = 0x80b8b98
515 brk(0x80b8b9f) = 0x80b8b9f
515 brk(0x80b8ba6) = 0x80b8ba6
515 brk(0x80b8bba) = 0x80b8bba
515 brk(0x80b8bca) = 0x80b8bca
515 brk(0x80b8bda) = 0x80b8bda
515 brk(0x80b8bf6) = 0x80b8bf6
515 brk(0x80b8bff) = 0x80b8bff
515 brk(0x80b8c08) = 0x80b8c08
515 brk(0x80b8c1c) = 0x80b8c1c
515 brk(0x80b8c46) = 0x80b8c46
515 brk(0x80b8c62) = 0x80b8c62
515 brk(0x80b8c6c) = 0x80b8c6c
515 brk(0x80b8c76) = 0x80b8c76
515 brk(0x80b8c8a) = 0x80b8c8a
515 brk(0x80b8cb3) = 0x80b8cb3
515 brk(0x80b8ccf) = 0x80b8ccf
515 brk(0x80b8cdf) = 0x80b8cdf
515 brk(0x80b8cef) = 0x80b8cef
515 brk(0x80b8d03) = 0x80b8d03
515 brk(0x80b8d05) = 0x80b8d05
515 brk(0x80b8d35) = 0x80b8d35
515 brk(0x80b8d64) = 0x80b8d64
515 brk(0x80b8d70) = 0x80b8d70
515 brk(0x80b8d7c) = 0x80b8d7c
515 open("./configure", O_RDONLY) = 3
515 brk(0x80c957c) = 0x80c957c
515 ioctl(3, TCGETS, 0xffffd0e8) = -1 ENOTTY (Inappropriate ioctl for device)
515 lseek(3, 0, SEEK_CUR) = 0
515 lseek(3, 0, SEEK_CUR) = 0
515 read(3, "#!/gnu/store/nqw8qcnxqkkfhsm56xg"..., 128) = 128
515 lseek(3, 0, SEEK_CUR) = 128
515 lseek(3, 0, SEEK_SET) = 0
515 dup2(3, 19) = 19
515 close(3) = 0
515 fcntl(19, F_SETFD, FD_CLOEXEC) = 0
515 fcntl(19, F_GETFL) = 0 (flags O_RDONLY)
515 fstat(19, 0xffffd190) = -1 EOVERFLOW (Value too large for defined data type)
515 close(19) = 0
515 brk(0x80c9588) = 0x80c9588
515 brk(0x80c9590) = 0x80c9590
515 brk(0x80c959e) = 0x80c959e
515 brk(0x80c95a6) = 0x80c95a6
515 brk(0x80c95ae) = 0x80c95ae
515 brk(0x80c95bf) = 0x80c95bf
515 brk(0x80c95c7) = 0x80c95c7
515 brk(0x80c95cf) = 0x80c95cf
515 brk(0x80c95e0) = 0x80c95e0
515 brk(0x80c95e8) = 0x80c95e8
515 brk(0x80c95f0) = 0x80c95f0
515 brk(0x80c960f) = 0x80c960f
515 brk(0x80c9617) = 0x80c9617
515 brk(0x80c961f) = 0x80c961f
515 brk(0x80c963d) = 0x80c963d
515 brk(0x80c9645) = 0x80c9645
515 brk(0x80c964d) = 0x80c964d
515 brk(0x80c965e) = 0x80c965e
515 brk(0x80c9666) = 0x80c9666
515 brk(0x80c966e) = 0x80c966e
515 brk(0x80c96ba) = 0x80c96ba
515 brk(0x80c96c2) = 0x80c96c2
515 brk(0x80c96d0) = 0x80c96d0
515 brk(0x80c96e1) = 0x80c96e1
515 brk(0x80c96f2) = 0x80c96f2
515 brk(0x80c9711) = 0x80c9711
515 brk(0x80c972f) = 0x80c972f
515 brk(0x80c9740) = 0x80c9740
515 brk(0x80c978c) = 0x80c978c
515 waitpid(-1, 0xffffc8b0, WNOHANG) = -1 ECHILD (No child processes)
515 brk(0x80c988c) = 0x80c988c
515 exit(0) = ?
515 +++ exited with 0 +++
502 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 14
502 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=14, si_uid=999, si_status=0, si_utime=0, si_stime=0} ---
502 rt_sigaction(SIGINT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, 8) = 0
502 rt_sigaction(SIGQUIT, {sa_handler=SIG_DFL, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, {sa_handler=SIG_IGN, sa_mask=[], sa_flags=SA_RESTORER, sa_restorer=0x4d4b10}, 8) = 0
502 open("config.status.hkJTSj", O_RDWR|O_CREAT|O_EXCL, 0600) = 10
502 fcntl(10, F_GETFL) = 0x8002 (flags O_RDWR|O_LARGEFILE)
502 lseek(10, 0, SEEK_CUR) = 0
502 fstat(10, {st_mode=S_IFREG|0600, st_size=0, ...}) = 0
502 stat("config.status", 0x7fffffffdfd0) = -1 ENOENT (No such file or directory)
502 write(2, "error: in phase 'configure': unc"..., 49) = 49
500 <... pselect6 resumed>) = 1 (in [12], left {tv_sec=43199, tv_nsec=979938930})
500 read(12, "error: in phase 'configure': unc"..., 4096) = 49
500 write(4, "gmlo\0\0\0\0D\0\0\0\0\0\0\0@ build-log 502 "..., 88 <unfinished ...>
502 write(2, "system-error \"stat\" \"~A: ~S\" (\"N"..., 80) = 80
500 <... write resumed>) = 88
502 gettimeofday({tv_sec=1643658451, tv_usec=75089}, NULL) = 0
500 pselect6(13, [12], NULL, NULL, {tv_sec=43200, tv_nsec=0}, NULL) = 1 (in [12], left {tv_sec=43199, tv_nsec=999992039})
500 read(12, "system-error \"stat\" \"~A: ~S\" (\"N"..., 4096) = 80
502 write(1, "phase `configure' failed after 0"..., 43 <unfinished ...>
500 write(4, "gmlo\0\0\0\0c\0\0\0\0\0\0\0@ build-log 502 "..., 120 <unfinished ...>
502 <... write resumed>) = 43
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 987 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-01-31 21:03 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-01-21 17:00 bug#53415: binutils-mesboot1-2.14 configure phase fails, In procedure stat: No such file or directory: "config.status" Christopher Baines
2022-01-25 22:42 ` Ludovic Courtès
2022-01-31 19:38 ` Christopher Baines
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.