;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013 Nikita Karetnikov ;;; Copyright © 2013 Cyril Roelandt ;;; Copyright © 2013-2022 Ludovic Courtès ;;; Copyright © 2013, 2014 Andreas Enge ;;; Copyright © 2015, 2016 Mathieu Lirzin ;;; Copyright © 2014, 2015, 2016 Mark H Weaver ;;; Copyright © 2014, 2016, 2019, 2021 Eric Bavier ;;; Copyright © 2015-2023 Flashner ;;; Copyright © 2015, 2018, 2020, 2021, 2022 Kyle Meyer ;;; Copyright © 2015, 2017, 2018, 2020 Ricardo Wurmus ;;; Copyright © 2016, 2017 Leo Famulari ;;; Copyright © 2016, 2017, 2018 Nikita ;;; Copyright © 2017–2022 Tobias Geerinckx-Rice ;;; Copyright © 2017 Vasile Dumitrascu ;;; Copyright © 2017 Clément Lassieur ;;; Copyright © 2017, 2020 EuAndreh ;;; Copyright © 2017, 2018, 2020, 2022 Marius Bakke ;;; Copyright © 2017 Stefan Reichör ;;; Copyright © 2017, 2020 Oleg Pykhalov ;;; Copyright © 2018 Sou Bunnbu ;;; Copyright © 2018 Christopher Baines ;;; Copyright © 2018 Timothy Sample ;;; Copyright © 2018 Arun Isaac ;;; Copyright © 2019 Jovany Leandro G.C ;;; Copyright © 2019 Kei Kebreau ;;; Copyright © 2019, 2020 Alex Griffin ;;; Copyright © 2020 Roel Janssen ;;; Copyright © 2020, 2021 Brice Waegeneire ;;; Copyright © 2020 John D. Boy ;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen ;;; Copyright © 2020, 2021, 2022, 2023 Vinicius Monego ;;; Copyright © 2020 Tanguy Le Carrour ;;; Copyright © 2020, 2021, 2022 Michael Rohleder ;;; Copyright © 2021 Greg Hogan ;;; Copyright © 2021, 2022, 2023 Maxim Cournoyer ;;; Copyright © 2021 Chris Marusich ;;; Copyright © 2021 Léo Le Bouter ;;; Copyright © 2021 LibreMiami ;;; Copyright © 2021 Xinglu Chen ;;; Copyright © 2021 François J. ;;; Copyright © 2021 Julien Lepiller ;;; Copyright © 2021 Guillaume Le Vaillant ;;; Copyright © 2021 jgart ;;; Copyright © 2021 Foo Chuan Wei ;;; Copyright © 2022 Jai Vetrivelan ;;; Copyright © 2022 Maxime Devos ;;; Copyright © 2022 Dhruvin Gandhi ;;; Copyright © 2015, 2022 David Thompson ;;; Copyright © 2023 Nicolas Graves ;;; ;;; This file is part of GNU Guix. ;;; ;;; GNU Guix is free software; you can redistribute it and/or modify it ;;; under the terms of the GNU General Public License as published by ;;; the Free Software Foundation; either version 3 of the License, or (at ;;; your option) any later version. ;;; ;;; GNU Guix is distributed in the hope that it will be useful, but ;;; WITHOUT ANY WARRANTY; without even the implied warranty of ;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;;; GNU General Public License for more details. ;;; ;;; You should have received a copy of the GNU General Public License ;;; along with GNU Guix. If not, see . (define-module (gnu packages version-control) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix utils) #:use-module (guix packages) #:use-module (guix deprecation) #:use-module (guix gexp) #:use-module (guix download) #:use-module (guix git-download) #:use-module (guix hg-download) #:use-module (guix build-system cmake) #:use-module (guix build-system copy) #:use-module (guix build-system gnu) #:use-module (guix build-system go) #:use-module (guix build-system perl) #:use-module (guix build-system python) #:use-module (guix build-system trivial) #:use-module (gnu packages apr) #:use-module (gnu packages autotools) #:use-module (gnu packages documentation) #:use-module (gnu packages base) #:use-module (gnu packages bash) #:use-module (gnu packages bison) #:use-module (gnu packages boost) #:use-module (gnu packages check) #:use-module (gnu packages cook) #:use-module (gnu packages curl) #:use-module (gnu packages docbook) #:use-module (gnu packages ed) #:use-module (gnu packages file) #:use-module (gnu packages flex) #:use-module (gnu packages freedesktop) #:use-module (gnu packages gettext) #:use-module (gnu packages gl) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) #:use-module (gnu packages gnupg) #:use-module (gnu packages golang) #:use-module (gnu packages groff) #:use-module (gnu packages guile) #:use-module (gnu packages guile-xyz) #:use-module (gnu packages image) #:use-module (gnu packages linux) #:use-module (gnu packages mail) #:use-module (gnu packages man) #:use-module (gnu packages maths) #:use-module (gnu packages nano) #:use-module (gnu packages ncurses) #:use-module (gnu packages ssh) #:use-module (gnu packages web) #:use-module (gnu packages openstack) #:use-module (gnu packages pcre) #:use-module (gnu packages perl) #:use-module (gnu packages perl-check) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages python-build) #:use-module (gnu packages python-check) #:use-module (gnu packages python-crypto) #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) #:use-module (gnu packages readline) #:use-module (gnu packages rsync) #:use-module (gnu packages ruby) #:use-module (gnu packages sqlite) #:use-module (gnu packages texinfo) #:use-module (gnu packages admin) #:use-module (gnu packages xml) #:use-module (gnu packages emacs) #:use-module (gnu packages compression) #:use-module (gnu packages sdl) #:use-module (gnu packages swig) #:use-module (gnu packages sync) #:use-module (gnu packages tcl) #:use-module (gnu packages textutils) #:use-module (gnu packages time) #:use-module (gnu packages tls) #:use-module (gnu packages) #:use-module (ice-9 match) #:use-module (srfi srfi-1) #:export (make-gitolite)) (define-public breezy (package (name "breezy") (version "3.2.2") (source (origin (method url-fetch) (uri (string-append "https://launchpad.net/brz/" (version-major+minor version) "/" version "/+download/breezy-" version ".tar.gz")) (modules '((guix build utils))) ;; Delete pre-generated Cython C files. (snippet '(for-each delete-file (find-files "." "\\pyx.c$"))) (sha256 (base32 "1md4b6ajawf5h50fqizmjj0g833ihc674dh7fn0mvl4d412nwyhq")) (patches (search-patches "breezy-fix-gio.patch")))) (build-system python-build-system) (arguments (list #:tests? #f ;FIXME: the test suite hangs #:phases #~(modify-phases %standard-phases (add-after 'unpack 'patch-test-shebangs (lambda _ (substitute* (append (find-files "breezy/bzr/tests") (find-files "breezy/tests")) (("#!/bin/sh") (format #f "#!~a" (which "sh")))))) (replace 'check (lambda* (#:key tests? #:allow-other-keys) (when tests? ;; The test_read_bundle tests fails with "TypeError: a ;; bytes-like object is required, not '_ResultTuple'" (see: ;; https://bugs.launchpad.net/brz/+bug/1968415/comments/4). (substitute* "breezy/bzr/tests/__init__.py" (("'test_read_bundle'," all) (string-append "# " all))) (setenv "BZR_EDITOR" "nano") (setenv "HOME" "/tmp") (invoke "testr" "init") (invoke "testr" "run"))))))) (native-inputs (list nano ;for tests python-cython python-docutils python-subunit python-testrepository)) (inputs (list gettext-minimal python-configobj python-dulwich python-fastbencode python-fastimport python-launchpadlib python-paramiko python-patiencediff python-pycryptodome python-pygobject python-pygpgme)) (home-page "https://www.breezy-vcs.org/") (synopsis "Decentralized revision control system") (description "Breezy (@command{brz}) is a decentralized revision control system. By default, Breezy provides support for both the @uref{https://bazaar.canonical.com/, Bazaar} and @uref{https://www.git-scm.com, Git} file formats. Breezy is backwabrds compatible with Bazaar's disk format and protocols. One of the key differences with Bazaar is that Breezy runs on Python 3.3 and later, rather than on Python 2.") (license license:gpl2+))) (define-public bazaar (deprecated-package "bazaar" breezy)) (define git-cross-configure-flags '("ac_cv_fread_reads_directories=yes" "ac_cv_snprintf_returns_bogus=no" "ac_cv_iconv_omits_bom=no")) (define-public git (package (name "git") (version "2.40.1") (source (origin (method url-fetch) (uri (string-append "mirror://kernel.org/software/scm/git/git-" version ".tar.xz")) (sha256 (base32 "1li1xwgiwccy88bkshsah2kzl1006jg29jp7n32gvjggiswvi4s8")))) (build-system gnu-build-system) (native-inputs `(("native-perl" ,perl) ;; Add bash-minimal explicitly to ensure it comes before bash-for-tests, ;; see . ("bash" ,bash-minimal) ("bash-for-tests" ,bash) ("gettext" ,gettext-minimal) ;; To build the man pages from the git sources, we would need a dependency ;; on a full XML tool chain, and building it actually takes ages. So we ;; use this lazy approach and use released tarball. ("git-manpages" ,(origin (method url-fetch) (uri (string-append "mirror://kernel.org/software/scm/git/git-manpages-" version ".tar.xz")) (sha256 (base32 "04yy5za8963q6xzrirflvxbi1216jzqj8ssvgd9nkld3ifa9q1gy")))) ;; For subtree documentation. ("asciidoc" ,asciidoc) ("docbook2x" ,docbook2x) ("docbook-xsl" ,docbook-xsl) ("libxslt" ,libxslt) ("pkg-config" ,pkg-config) ("texinfo" ,texinfo) ("xmlto" ,xmlto))) (inputs `(("curl" ,curl) ("expat" ,expat) ("openssl" ,openssl) ("perl" ,perl) ("python" ,python) ; for git-p4 ("zlib" ,zlib) ;; For PCRE support in git grep (USE_LIBPCRE2). ("pcre" ,pcre2) ;; For 'gitweb.cgi'. ("perl-cgi" ,perl-cgi) ;; For 'git-svn'. ("subversion" ,subversion) ("perl-term-readkey" ,perl-term-readkey) ;; For 'git-send-email'. ("perl-authen-sasl" ,perl-authen-sasl) ("perl-net-smtp-ssl" ,perl-net-smtp-ssl) ("perl-io-socket-ssl" ,perl-io-socket-ssl) ;; For 'git gui', 'gitk', and 'git citool'. ("tcl" ,tcl) ("tk" ,tk) ;; For 'git-credential-libsecret' ("glib" ,glib) ("libsecret" ,libsecret))) (outputs '("out" ; the core "send-email" ; for git-send-email "svn" ; git-svn "credential-netrc" ; git-credential-netrc "credential-libsecret" ; git-credential-libsecret "subtree" ; git-subtree "gui")) ; gitk, git gui (arguments `(#:make-flags `("V=1" ;more verbose compilation ,(string-append "SHELL_PATH=" (assoc-ref %build-inputs "bash") "/bin/sh") ;; Tests require a bash with completion support. ,(string-append "TEST_SHELL_PATH=" (assoc-ref %build-inputs "bash-for-tests") "/bin/bash") "USE_LIBPCRE2=yes" ;; By default 'make install' creates hard links for ;; things in 'libexec/git-core', which leads to huge ;; nars; see . "NO_INSTALL_HARDLINKS=indeed") ;; Make sure the full bash does not end up in the final closure. #:disallowed-references (,bash) #:test-target "test" ;; The explicit --with-tcltk forces the build system to hardcode the ;; absolute file name to 'wish'. #:configure-flags (list (string-append "--with-tcltk=" (assoc-ref %build-inputs "tk") "/bin/wish8.6") ; XXX ,@(if (%current-target-system) git-cross-configure-flags '())) #:modules ((srfi srfi-1) (srfi srfi-26) ((guix build gnu-build-system) #:prefix gnu:) ,@%gnu-build-system-modules) #:phases (modify-phases %standard-phases ,@(if (%current-target-system) ;; The git build system assumes build == host `((add-after 'unpack 'use-host-uname_S (lambda _ (substitute* "config.mak.uname" (("uname_S := .*" all) (if (equal? ,(%current-target-system) "i586-pc-gnu") "uname_S := GNU\n" all)))))) ;; We do not have bash-for-tests when cross-compiling. `((add-after 'unpack 'modify-PATH (lambda* (#:key inputs #:allow-other-keys) (let ((path (string-split (getenv "PATH") #\:)) (bash-full (assoc-ref inputs "bash-for-tests"))) ;; Drop the test bash from PATH so that (which "sh") and ;; similar does the right thing. (setenv "PATH" (string-join (remove (cut string-prefix? bash-full <>) path) ":"))))))) ;; Add cross curl-config script to PATH when cross-compiling. ,@(if (%current-target-system) '((add-before 'configure 'add-cross-curl-config (lambda* (#:key inputs #:allow-other-keys) (setenv "PATH" (string-append (assoc-ref inputs "curl") "/bin:" (getenv "PATH")))))) '()) (add-after 'configure 'patch-makefiles (lambda _ (substitute* "Makefile" (("/usr/bin/perl") (which "perl")) (("/usr/bin/python") (which "python3"))))) (add-after 'configure 'add-PM.stamp (lambda _ ;; Add the "PM.stamp" to avoid "no rule to make target". (call-with-output-file "perl/PM.stamp" (const #t)))) (add-after 'build 'build-subtree (lambda* (#:key inputs #:allow-other-keys) (with-directory-excursion "contrib/subtree" (substitute* "Makefile" ;; Apparently `xmlto' does not bother to looks up the stylesheets ;; specified in the XML, unlike the above substitution. Instead it ;; uses a hard-coded URL. Work around it here, but if this is ;; common perhaps we should hardcode this path in xmlto itself. (("\\$\\(XMLTO\\) -m \\$\\(MANPAGE_XSL\\)") (string-append "$(XMLTO) -x " (string-append (assoc-ref inputs "docbook-xsl") "/xml/xsl/docbook-xsl-" ,(package-version docbook-xsl)) "/manpages/docbook.xsl -m $(MANPAGE_XSL)"))) (invoke "make") (invoke "make" "install") (invoke "make" "install-doc") (substitute* "git-subtree" (("/bin/sh") (which "sh")))))) (add-before 'check 'patch-tests (lambda _ (let ((store-directory (%store-directory))) ;; These files contain some funny bytes that Guile is unable ;; to decode for shebang patching. Just delete them. (for-each delete-file '("t/t4201-shortlog.sh" "t/t7813-grep-icase-iso.sh")) ;; Many tests contain inline shell scripts (hooks etc). (substitute* (find-files "t" "\\.sh$") (("#!/bin/sh") (string-append "#!" (which "sh")))) ;; Un-do shebang patching here to prevent checksum mismatch. (substitute* '("t/t4034/perl/pre" "t/t4034/perl/post") (("^#!.*/bin/perl") "#!/usr/bin/perl")) (substitute* "t/t5003-archive-zip.sh" (("cp /bin/sh") (string-append "cp " (which "sh")))) (substitute* "t/t6030-bisect-porcelain.sh" (("\"/bin/sh\"") (string-append "\"" (which "sh") "\""))) ;; FIXME: This test runs `git commit` with a bogus EDITOR ;; and empty commit message, but does not fail the way it's ;; expected to. The test passes when invoked interactively. (substitute* "t/t7508-status.sh" (("\tcommit_template_commented") "\ttrue")) ;; More checksum mismatches due to odd shebangs. (substitute* "t/t9100-git-svn-basic.sh" (((string-append "\"#!" store-directory ".*/bin/sh")) "\"#!/bin/sh") ) (substitute* "t/t9300-fast-import.sh" (((string-append "\t#!" store-directory ".*/bin/sh")) "\t#!/bin/sh") (((string-append "'#!" store-directory ".*/bin/sh")) "'#!/bin/sh")) ;; FIXME: Some hooks fail with "basename: command not found". ;; See 't/trash directory.t9164.../svn-hook.log'. (delete-file "t/t9164-git-svn-dcommit-concurrent.sh") ;; XXX: These tests fail intermittently for unknown reasons: ;; . (for-each delete-file '("t/t9128-git-svn-cmd-branch.sh" "t/t9167-git-svn-cmd-branch-subproject.sh" "t/t9141-git-svn-multiple-branches.sh"))))) (add-after 'install 'install-info-manual (lambda* (#:key parallel-build? #:allow-other-keys) (define job-count (if parallel-build? (number->string (parallel-job-count)) "1")) (invoke "make" "-C" "Documentation" "install-info" "-j" job-count ;; The Makefile refer to 'docbook2x-texi', but our binary ;; is named 'docbook2texi'. "DOCBOOK2X_TEXI=docbook2texi" "PERL_PATH=perl"))) (add-after 'install 'install-shell-completion (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (completions (string-append out "/etc/bash_completion.d"))) ;; TODO: Install the tcsh and zsh completions in the right place. (mkdir-p completions) (copy-file "contrib/completion/git-completion.bash" (string-append completions "/git"))))) (add-after 'install 'install-credential-netrc (lambda* (#:key outputs #:allow-other-keys) (let* ((netrc (assoc-ref outputs "credential-netrc"))) (install-file "contrib/credential/netrc/git-credential-netrc.perl" (string-append netrc "/bin")) (rename-file (string-append netrc "/bin/git-credential-netrc.perl") (string-append netrc "/bin/git-credential-netrc")) ;; Previously, Git.pm was automatically found by netrc. ;; Perl 5.26 changed how it locates modules so that @INC no ;; longer includes the current working directory (the Perl ;; community calls this "dotless @INC"). (wrap-program (string-append netrc "/bin/git-credential-netrc") `("PERL5LIB" ":" prefix (,(string-append (assoc-ref outputs "out") "/share/perl5"))))))) (add-after 'install 'install-credential-libsecret (lambda* (#:key outputs #:allow-other-keys) (let* ((libsecret (assoc-ref outputs "credential-libsecret"))) (with-directory-excursion "contrib/credential/libsecret" ((assoc-ref gnu:%standard-phases 'build)) (install-file "git-credential-libsecret" (string-append libsecret "/bin")))))) (add-after 'install 'install-subtree (lambda* (#:key outputs #:allow-other-keys) (let ((subtree (assoc-ref outputs "subtree"))) (install-file "contrib/subtree/git-subtree" (string-append subtree "/bin")) (install-file "contrib/subtree/git-subtree.1" (string-append subtree "/share/man/man1"))))) (add-after 'install 'restore-sample-hooks-shebang (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (dir (string-append out "/share/git-core/templates/hooks"))) (for-each (lambda (file) (format #t "restoring shebang on `~a'~%" file) (substitute* file (("^#!.*/bin/sh") "#!/bin/sh"))) (find-files dir ".*"))))) (add-after 'install 'split (lambda* (#:key inputs outputs #:allow-other-keys) ;; Split the binaries to the various outputs. (let* ((out (assoc-ref outputs "out")) (se (assoc-ref outputs "send-email")) (svn (assoc-ref outputs "svn")) (gui (assoc-ref outputs "gui")) (gitk (string-append out "/bin/gitk")) (gitk* (string-append gui "/bin/gitk")) (git-gui (string-append out "/libexec/git-core/git-gui")) (git-gui* (string-append gui "/libexec/git-core/git-gui")) (git-cit (string-append out "/libexec/git-core/git-citool")) (git-cit* (string-append gui "/libexec/git-core/git-citool")) (git-se (string-append out "/libexec/git-core/git-send-email")) (git-se* (string-append se "/libexec/git-core/git-send-email")) (git-svn (string-append out "/libexec/git-core/git-svn")) (git-svn* (string-append svn "/libexec/git-core/git-svn")) (git-sm (string-append out "/libexec/git-core/git-submodule"))) (mkdir-p (string-append gui "/bin")) (mkdir-p (string-append gui "/libexec/git-core")) (mkdir-p (string-append se "/libexec/git-core")) (mkdir-p (string-append svn "/libexec/git-core")) (for-each (lambda (old new) (copy-file old new) (delete-file old) (chmod new #o555)) (list gitk git-gui git-cit git-se git-svn) (list gitk* git-gui* git-cit* git-se* git-svn*)) ;; Tell 'git-svn' where Subversion and perl-term-readkey are. (wrap-program git-svn* `("PATH" ":" prefix (,(string-append (assoc-ref inputs "subversion") "/bin"))) `("PERL5LIB" ":" prefix ,(map (lambda (i) (string-append (assoc-ref inputs i) "/lib/perl5/site_perl")) '("subversion" "perl-term-readkey"))) ;; XXX: The .so for SVN/Core.pm lacks a RUNPATH, so ;; help it find 'libsvn_client-1.so'. `("LD_LIBRARY_PATH" ":" prefix (,(string-append (assoc-ref inputs "subversion") "/lib")))) ;; Tell 'git-send-email' where perl modules are. (wrap-program git-se* `("PERL5LIB" ":" prefix ,(map (lambda (o) (string-append o "/lib/perl5/site_perl")) (list ,@(transitive-input-references 'inputs (map (lambda (l) (assoc l (package-inputs this-package))) '("perl-authen-sasl" "perl-net-smtp-ssl" "perl-io-socket-ssl"))))))) ;; Tell 'gitweb.cgi' where perl modules are. (wrap-program (string-append out "/share/gitweb/gitweb.cgi") `("PERL5LIB" ":" prefix ,(map (lambda (o) (string-append o "/lib/perl5/site_perl")) (list ,@(transitive-input-references 'inputs (map (lambda (l) (assoc l (package-inputs this-package))) '("perl-cgi"))))))) ;; Tell 'git-submodule' where Perl is. (wrap-program git-sm `("PATH" ":" prefix (,(string-append (assoc-ref inputs "perl") "/bin"))))))) (add-after 'split 'install-man-pages (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (man (string-append out "/share/man")) (manpages (assoc-ref inputs "git-manpages"))) (mkdir-p man) (with-directory-excursion man (invoke "tar" "xvf" manpages)))))))) (native-search-paths ;; For HTTPS access, Git needs a single-file certificate bundle, specified ;; with $GIT_SSL_CAINFO. (list (search-path-specification (variable "GIT_SSL_CAINFO") (file-type 'regular) (separator #f) ;single entry (files '("etc/ssl/certs/ca-certificates.crt"))) (search-path-specification (variable "GIT_EXEC_PATH") (separator #f) ;single entry (files '("libexec/git-core"))))) (synopsis "Distributed version control system") (description "Git is a free distributed version control system designed to handle everything from small to very large projects with speed and efficiency.") ;; XXX: Ignore this CVE to work around a name clash with the unrelated ;; "cpe:2.3:a:jenkins:git" package. The proper fix is for (guix cve) to ;; account for "vendor names". (properties '((lint-hidden-cve . ("CVE-2018-1000182" "CVE-2018-1000110" "CVE-2019-1003010" "CVE-2020-2136" "CVE-2021-21684" "CVE-2022-30947" "CVE-2022-30948" "CVE-2022-30949" "CVE-2022-36882" "CVE-2022-36883" "CVE-2022-36884")))) (license license:gpl2) (home-page "https://git-scm.com/"))) (define-public git-minimal ;; The size of the closure of 'git-minimal' is two thirds that of 'git'. ;; Its test suite runs slightly faster and most importantly it doesn't ;; depend on packages that are expensive to build such as Subversion. (package (inherit git) (name "git-minimal") (arguments (substitute-keyword-arguments (package-arguments git) ((#:phases phases) `(modify-phases ,phases (replace 'patch-makefiles (lambda _ (substitute* "Makefile" (("/usr/bin/perl") (which "perl"))))) (delete 'build-subtree) (delete 'split) (delete 'install-man-pages) (delete 'install-info-manual) (delete 'install-subtree) (delete 'install-credential-netrc) (delete 'install-credential-libsecret) (add-after 'install 'remove-unusable-perl-commands (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (libexec (string-append out "/libexec"))) (for-each (lambda (file) (delete-file (string-append libexec "/git-core/" file))) '("git-svn" "git-cvsimport" "git-archimport" "git-cvsserver" "git-request-pull" "git-add--interactive" "git-cvsexportcommit" "git-instaweb" "git-send-email")) (delete-file (string-append bin "/git-cvsserver")) ;; These templates typically depend on Perl. Remove them. (delete-file-recursively (string-append out "/share/git-core/templates/hooks")) ;; Gitweb depends on Perl as well. (delete-file-recursively (string-append out "/share/gitweb"))))))) ((#:make-flags flags) `(delete "USE_LIBPCRE2=yes" ,flags)) ((#:configure-flags flags) `(list ,@(if (%current-target-system) git-cross-configure-flags '()))) ((#:disallowed-references lst '()) `(,perl ,@lst)))) (outputs '("out")) (native-inputs `(("bash" ,bash-minimal) ("bash-for-tests" ,bash) ("native-perl" ,perl) ("gettext" ,gettext-minimal))) (inputs (list curl ;for HTTP(S) access expat ;for 'git push' over HTTP(S) openssl perl zlib)))) ;;; The symbol git-minimal/fixed should be used when git-minimal needs fixes ;;; (security or else) and this deprecation could be removed. (define-deprecated/public-alias git-minimal/fixed git-minimal/pinned) (define-public git-minimal/pinned ;; Version that rarely changes, depended on by Graphene/GTK+. (package/inherit git-minimal (version "2.33.1") (source (origin (method url-fetch) (uri (string-append "mirror://kernel.org/software/scm/git/git-" version ".tar.xz")) (sha256 (base32 "0bqz401dyp8wnjj3k5ahrniwk4dalndysqazzwdvv25hqbkacm70")))))) (define-public git2cl (let ((commit "1d74d4c0d933fc69ed5cec838c73502584dead05")) (package (name "git2cl") (version (string-append "20120919." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://git.savannah.nongnu.org/git/git2cl.git") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0wnnbm2sjvfj0qrksj89jlnl69miwl0vk3wrrvgvpclgys3na2g1")))) (build-system copy-build-system) (inputs (list perl)) (arguments `(#:install-plan '(("git2cl" "bin/git2cl")))) (home-page "https://savannah.nongnu.org/projects/git2cl") (synopsis "Convert Git logs to GNU ChangeLog format") (description "@code{git2cl} is a command line tool for converting Git logs to GNU ChangeLog format.") (license license:gpl2+)))) (define-public gitless (package (name "gitless") (version "0.8.8") (source (origin ;; The PyPI package lacks a test suite. Build directly from git. (method git-fetch) (uri (git-reference (url "https://github.com/gitless-vcs/gitless") (commit (string-append "v" version)))) (sha256 (base32 "048kl27zjr68hgs70g3l98ci9765wxva6azzrhcdys7nsdd493n6")) (file-name (git-file-name name version)))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'loosen-requirements (lambda _ (substitute* "setup.py" ;; Using Guix's python-pygit2 1.1.0 appears to work fine… (("pygit2==") "pygit2>=")) #t)) (add-before 'check 'prepare-for-tests (lambda _ ;; Find the 'gl' command. (rename-file "gl.py" "gl") (setenv "PATH" (string-append (getcwd) ":" (getenv "PATH"))) ;; The tests try to run git as if it were already set up. (setenv "HOME" (getcwd)) (invoke "git" "config" "--global" "user.email" "git@example.com") (invoke "git" "config" "--global" "user.name" "Guix"))) (replace 'wrap (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (git (assoc-ref inputs "git"))) (wrap-program (string-append out "/bin/gl") `("PATH" ":" prefix (,(string-append git "/bin"))) `("GUIX_PYTHONPATH" ":" = (,(string-append out "/lib/python" ,(version-major+minor (package-version python)) "/site-packages:") ,(getenv "GUIX_PYTHONPATH")))) #t)))))) (native-inputs `(("git-for-tests" ,git-minimal))) (inputs `(("git" ,git-minimal) ("python-clint" ,python-clint) ("python-pygit2" ,python-pygit2) ("python-sh" ,python-sh))) (home-page "https://gitless.com") (synopsis "Simple version control system built on top of Git") (description "Gitless is a Git-compatible version control system that aims to be easy to learn and use. It simplifies the common workflow by committing changes to tracked files by default and saving any uncommitted changes as part of a branch. The friendly @command{gl} command-line interface gives feedback and helps you figure out what to do next. Gitless is implemented on top of Git and its commits and repositories are indistinguishable from Git's. You (or other contributors) can always fall back on @command{git}, and use any regular Git hosting service.") (license license:expat))) (define-public git-cal (package (name "git-cal") (version "0.9.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/k4rthik/git-cal") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "08s9sif3qlk5n2dqpzq5yjczggnqlnxldljspjdqgpfydb2dqg3z")))) (build-system perl-build-system) (home-page "https://github.com/k4rthik/git-cal/") (synopsis "GitHub like contributions calendar for terminal") (description "@code{git-cal} is a script to view commits calendar similar to GitHub contributions calendar.") (license license:expat))) (define-public libgit2 (package (name "libgit2") (version "1.5.1") (source (origin ;; Since v1.1.1, release artifacts are no longer offered (see: ;; https://github.com/libgit2/libgit2/discussions/5932#discussioncomment-1682729). (method git-fetch) (uri (git-reference (url "https://github.com/libgit2/libgit2") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "04ypzpicpgq1wh6anwcmjjyh2b854lvjhxq0hq2hbsx7kb14qc1b")) (modules '((guix build utils))) (snippet '(begin (delete-file-recursively "deps"))))) (build-system cmake-build-system) (outputs '("out" "debug")) (arguments `(#:configure-flags (list "-DUSE_NTLMCLIENT=OFF" ;TODO: package this "-DREGEX_BACKEND=pcre2" "-DUSE_HTTP_PARSER=system" "-DUSE_SSH=ON" ; cmake fails to find libssh if this is missing ,@(if (%current-target-system) `((string-append "-DPKG_CONFIG_EXECUTABLE=" (search-input-file %build-inputs (string-append "/bin/" ,(%current-target-system) "-pkg-config")))) '())) #:phases (modify-phases %standard-phases ;; Run checks more verbosely, unless we are cross-compiling. (replace 'check (lambda* (#:key (tests? #t) #:allow-other-keys) (if tests? (invoke "./libgit2_tests" "-v" "-Q") ;; Tests may be disabled if cross-compiling. (format #t "Test suite not run.~%"))))))) (inputs (list libssh2 http-parser)) (native-inputs (list pkg-config python)) (propagated-inputs ;; These libraries are in 'Requires.private' in libgit2.pc. (list openssl pcre2 zlib)) (home-page "https://libgit2.org/") (synopsis "Library providing Git core methods") (description "Libgit2 is a portable, pure C implementation of the Git core methods provided as a re-entrant linkable library with a solid API, allowing you to write native speed custom Git applications in any language with bindings.") ;; GPLv2 with linking exception (license license:gpl2))) (define-public libgit2-1.4 (package (inherit libgit2) (version "1.4.5") (source (origin (inherit (package-source libgit2)) (method git-fetch) (uri (git-reference (url "https://github.com/libgit2/libgit2") (commit (string-append "v" version)))) (file-name (git-file-name "libgit2" version)) (sha256 (base32 "0q754ipc6skagszi93lcy6qr09ibavivm2q5i5fhpdblvlnv2p7x")))))) (define-public libgit2-1.3 (package (inherit libgit2-1.4) (version "1.3.2") (source (origin (inherit (package-source libgit2-1.4)) (method git-fetch) (uri (git-reference (url "https://github.com/libgit2/libgit2") (commit (string-append "v" version)))) (file-name (git-file-name "libgit2" version)) (sha256 (base32 "1dngga8jq419z6ps65wpmh2jihcf70k6r98pb1m1yiwj7qqh9792")))) (arguments (substitute-keyword-arguments (package-arguments libgit2) ((#:phases _ '%standard-phases) `(modify-phases %standard-phases ;; Run checks more verbosely, unless we are cross-compiling. (replace 'check (lambda* (#:key (tests? #t) #:allow-other-keys) (if tests? (invoke "./libgit2_clar" "-v" "-Q") ;; Tests may be disabled if cross-compiling. (format #t "Test suite not run.~%")))))))))) (define-public git-crypt (package (name "git-crypt") (version "0.7.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/AGWA/git-crypt") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0ymk2z0jfyhycia8hg6wbj2g06m163yzqzanfk172cxb13fa8c26")))) (build-system gnu-build-system) (inputs (list git openssl)) (native-inputs (list docbook-xsl libxslt)) (arguments `(#:tests? #f ; No tests. #:phases (modify-phases %standard-phases (delete 'configure) (add-after 'unpack 'patch-makefile (lambda* (#:key inputs #:allow-other-keys) (substitute* "Makefile" (("http://docbook.sourceforge.net/release/xsl/current/manpages/docbook.xsl") (string-append (assoc-ref inputs "docbook-xsl") "/xml/xsl/docbook-xsl-" ,(package-version docbook-xsl) "/manpages/docbook.xsl"))) #t)) (replace 'build (lambda _ (invoke "make" "ENABLE_MAN=yes"))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (invoke "make" "install" "ENABLE_MAN=yes" (string-append "PREFIX=" out)))))))) (home-page "https://www.agwa.name/projects/git-crypt/") (synopsis "Transparent encryption of files in a git repository") (description "git-crypt enables transparent encryption and decryption of files in a git repository. Files which you choose to protect are encrypted when committed, and decrypted when checked out. git-crypt lets you freely share a repository containing a mix of public and private content. git-crypt gracefully degrades, so developers without the secret key can still clone and commit to a repository with encrypted files. This lets you store your secret material (such as keys or passwords) in the same repository as your code, without requiring you to lock down your entire repository.") (license license:gpl3+))) (define-public git-remote-gcrypt (package (name "git-remote-gcrypt") (version "1.5") (source (origin (method git-fetch) (uri (git-reference (url "https://git.spwhitton.name/git-remote-gcrypt") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1m1wlbqpqyhh2z0ka3gjs5yabd32nnkzw5hak6czcqrhhkfsqbmv")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) #:builder (begin (use-modules (guix build utils)) (let* ((source (assoc-ref %build-inputs "source")) (output (assoc-ref %outputs "out")) (bindir (string-append output "/bin"))) (install-file (string-append source "/git-remote-gcrypt") bindir))))) (home-page "https://spwhitton.name/tech/code/git-remote-gcrypt/") (synopsis "Whole remote repository encryption") (description "git-remote-gcrypt is a Git remote helper to push and pull from repositories encrypted with GnuPG. It works with the standard Git transports, including repository hosting services like GitLab. Remote helper programs are invoked by Git to handle network transport. This helper handles @code{gcrypt:} URLs that access a remote repository encrypted with GPG, using our custom format. Supported locations are local, @code{rsync://} and @code{sftp://}, where the repository is stored as a set of files, or instead any Git URL where gcrypt will store the same representation in a Git repository, bridged over arbitrary Git transport. The aim is to provide confidential, authenticated Git storage and collaboration using typical untrusted file hosts or services.") (license license:gpl3+))) (define-public cgit (package (name "cgit") ;; Update the ‘git-source’ input as well. (version "1.2.3") (source (origin (method url-fetch) (uri (string-append "https://git.zx2c4.com/cgit/snapshot/cgit-" version ".tar.xz")) (sha256 (base32 "193d990ym10qlslk0p8mjwp2j6rhqa7fq0y1iff65lvbyv914pss")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; XXX: fail to build the in-source git. #:test-target "test" #:make-flags '("CC=gcc" "SHELL_PATH=sh") #:phases (modify-phases %standard-phases (add-after 'unpack 'unpack-git (lambda* (#:key inputs #:allow-other-keys) ;; Unpack the source of git into the 'git' directory. (invoke "tar" "--strip-components=1" "-C" "git" "-xf" (assoc-ref inputs "git-source")))) (add-after 'unpack 'patch-absolute-file-names (lambda* (#:key inputs #:allow-other-keys) (define (quoted-file-name input path) (string-append "\"" input path "\"")) (substitute* "ui-snapshot.c" (("\"gzip\"") (quoted-file-name (assoc-ref inputs "gzip") "/bin/gzip")) (("\"bzip2\"") (quoted-file-name (assoc-ref inputs "bzip2") "/bin/bzip2")) (("\"xz\"") (quoted-file-name (assoc-ref inputs "xz") "/bin/xz"))) (substitute* "filters/about-formatting.sh" (("$\\(dirname $0\\)") (string-append (assoc-ref outputs "out") "/lib/cgit/filters")) (("\\| tr") (string-append "| " (which "tr")))) (substitute* "filters/html-converters/txt2html" (("sed") (which "sed"))) (substitute* "filters/html-converters/man2html" (("groff") (which "groff"))) (substitute* "filters/html-converters/rst2html" (("rst2html\\.py") (which "rst2html.py"))) #t)) (delete 'configure) ; no configure script (add-after 'build 'build-man (lambda* (#:key make-flags #:allow-other-keys) (apply invoke "make" "doc-man" make-flags))) (replace 'install (lambda* (#:key make-flags outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (apply invoke "make" "install" "install-man" (string-append "prefix=" out) (string-append "CGIT_SCRIPT_PATH=" out "/share/cgit") make-flags) ;; Move the platform-dependent 'cgit.cgi' into lib to get it ;; stripped. (rename-file (string-append out "/share/cgit/cgit.cgi") (string-append out "/lib/cgit/cgit.cgi")) #t))) (add-after 'install 'wrap-python-scripts (lambda* (#:key outputs #:allow-other-keys) (for-each (lambda (file) (wrap-program (string-append (assoc-ref outputs "out") "/lib/cgit/filters/" file) `("GUIX_PYTHONPATH" ":" prefix (,(getenv "GUIX_PYTHONPATH"))))) '("syntax-highlighting.py" "html-converters/md2html")) #t))))) (native-inputs ;; For building manpage. (list asciidoc gzip bzip2 xz)) (inputs `(;; Building cgit requires a Git source tree. ("git-source" ,(origin (method url-fetch) ;; cgit is tightly bound to git. Use GIT_VER from the Makefile, ;; which may not match the current (package-version git). (uri "mirror://kernel.org/software/scm/git/git-2.25.4.tar.xz") (sha256 (base32 "11am6s46wmn1yll5614smjhzlghbqq6gysgcs64igjr9y5wzpdxq")))) ("openssl" ,openssl) ("groff" ,groff) ("python" ,python) ("python-docutils" ,python-docutils) ("python-markdown" ,python-markdown) ("python-pygments" ,python-pygments) ("zlib" ,zlib))) (home-page "https://git.zx2c4.com/cgit/") (synopsis "Web frontend for git repositories") (description "CGit is an attempt to create a fast web interface for the Git SCM, using a built-in cache to decrease server I/O pressure.") (license license:gpl2))) (define-public python-git-multimail (package (name "python-git-multimail") (version "1.6.0") (source (origin (method url-fetch) (uri (pypi-uri "git-multimail" version)) (sha256 (base32 "0hwgf2p2dd4z397wj0y558s8xxbkzbsa6yb9n1iax624y7swjng1")))) (build-system python-build-system) (arguments '(#:phases (modify-phases %standard-phases (add-after 'unpack 'patch (lambda* (#:key inputs #:allow-other-keys) (substitute* "setup.py" (("'git-multimail', 'README.rst'") "'README.rst'")) (substitute* "git-multimail/git_multimail.py" (("GIT_EXECUTABLE = 'git'") (string-append "GIT_EXECUTABLE = '" (assoc-ref inputs "git") "/bin/git" "'")) (("/usr/sbin/sendmail") (search-input-file inputs "/sbin/sendmail")))))))) (inputs (list git sendmail)) (home-page "https://github.com/git-multimail/git-multimail") (synopsis "Send notification emails for Git pushes") (description "This hook sends emails describing changes introduced by pushes to a Git repository. For each reference that was changed, it emits one ReferenceChange email summarizing how the reference was changed, followed by one Revision email for each new commit that was introduced by the reference change. This script is designed to be used as a post-receive hook in a Git repository") (license license:gpl2))) (define-public python-ghp-import (package (name "python-ghp-import") (version "2.0.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/davisp/ghp-import") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0i4lxsgqri1y8sw4k44bkwbzmdmk4vpmdi882mw148j8gk4i7vvj")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'install-documentation (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (doc (string-append out "/share/doc")) (licenses (string-append out "/share/licenses"))) (install-file "README.md" doc) (install-file "LICENSE" licenses))))))) (propagated-inputs (list python-dateutil)) (home-page "https://github.com/davisp/ghp-import") (synopsis "Copy directory to the gh-pages branch") (description "Script that copies a directory to the gh-pages branch (by default) of the repository.") ;; See . (license (license:non-copyleft "https://raw.githubusercontent.com/davisp/ghp-import/master/LICENSE" "Tumbolia Public License")))) (define-public python-gitdb (package (name "python-gitdb") (version "4.0.2") (source (origin (method url-fetch) (uri (pypi-uri "gitdb" version)) (sha256 (base32 "0l113fphn6msjl3cl3kyf332b6lal7daxdd0nfma0x9ipfb013jr")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'check 'create-test-repository (lambda _ (mkdir "/tmp/testrepo") ;; Some tests require a git repository, so create one. (with-directory-excursion "/tmp/testrepo" (do ((filecount 1 (1+ filecount))) ((> filecount 1000)) (call-with-output-file (string-append "file" (number->string filecount)) (lambda (port) (format port "~a" filecount)))) (begin (invoke "git" "init") (invoke "git" "config" "user.name" "Total Git") (invoke "git" "config" "user.email" "git@localhost") (invoke "git" "add" "-A") (invoke "git" "commit" "-q" "-m" "dummy commit"))) ;; The repository checkout must be a "bare" clone. (invoke "git" "clone" "--bare" "/tmp/testrepo" "/tmp/testrepo.git"))) (replace 'check (lambda _ (setenv "GITDB_TEST_GIT_REPO_BASE" "/tmp/testrepo.git") ;; Skip tests that must be run from the gitdb repository. (setenv "TRAVIS" "1") (invoke "nosetests" "-v")))))) (propagated-inputs (list python-smmap)) (native-inputs (list git python-nose)) (home-page "https://github.com/gitpython-developers/gitdb") (synopsis "Python implementation of the Git object database") (description "GitDB allows you to access @dfn{bare} Git repositories for reading and writing. It aims at allowing full access to loose objects as well as packs with performance and scalability in mind. It operates exclusively on streams, allowing to handle large objects with a small memory footprint.") (license license:bsd-3))) (define-public python-gitpython (package (name "python-gitpython") (version "3.1.24") (source (origin (method url-fetch) (uri (pypi-uri "GitPython" version)) (sha256 (base32 "1rarp97cpjnhi106k2yhb7kygdyflmlgq0icxv3ggzl4wvszv0yz")))) (build-system python-build-system) (arguments `(#:tests? #f ;XXX: Tests can only be run within the GitPython repository. #:phases (modify-phases %standard-phases (add-after 'unpack 'embed-git-reference (lambda* (#:key inputs #:allow-other-keys) (substitute* "git/cmd.py" (("git_exec_name = \"git\"") (string-append "git_exec_name = \"" (assoc-ref inputs "git") "/bin/git\"")))))))) (inputs (list git)) (propagated-inputs (list python-gitdb python-typing-extensions)) (native-inputs (list python-ddt python-nose)) (home-page "https://github.com/gitpython-developers/GitPython") (synopsis "Python library for interacting with Git repositories") (description "GitPython is a python library used to interact with Git repositories, high-level like git-porcelain, or low-level like git-plumbing. It provides abstractions of Git objects for easy access of repository data, and additionally allows you to access the Git repository more directly using either a pure Python implementation, or the faster, but more resource intensive @command{git} command implementation.") (license license:bsd-3))) (define-public shflags (package (name "shflags") (version "1.2.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/kward/shflags") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1ydx0sb6vz9s2dgp5bd64y7fpzh9qvmlfjxrbmzac8saknijrlly")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests #:phases (modify-phases %standard-phases (delete 'configure) ; nothing to configure (delete 'build) ; nothing to build (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (src (string-append out "/src"))) (install-file "shflags" src) #t)))))) (home-page "https://github.com/kward/shflags") (synopsis "Command-line flags library for shell scripts") (description "Shell Flags (shFlags) is a library written to greatly simplify the handling of command-line flags in Bourne based Unix shell scripts (bash, dash, ksh, sh, zsh). Most shell scripts use getopt for flags processing, but the different versions of getopt on various OSes make writing portable shell scripts difficult. shFlags instead provides an API that doesn't change across shell and OS versions so the script writer can be confident that the script will work.") (license license:lgpl2.1))) (define-public git-flow (package (name "git-flow") ;; This version has not be officially released yet, so we build it ;; directly from the git repository. (version "1.12.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/petervanderdoes/gitflow-avh/") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "13q4mnrxr03wz2dkhzy73j384g299m4d545cnhxcaznvdwfany4h")))) (build-system gnu-build-system) (inputs (list shflags)) (arguments '(#:tests? #f ; no tests #:make-flags (list (string-append "prefix=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (add-after 'unpack 'reset-shFlags-link (lambda* (#:key inputs #:allow-other-keys) ;; The link points to a file in the shFlags submodule. ;; Redirect it to point to our system shFlags. (let ((shflags (assoc-ref inputs "shflags"))) (begin (delete-file "gitflow-shFlags") (symlink (string-append shflags "/src/shflags") "gitflow-shFlags"))))) (delete 'configure) (delete 'build)))) (home-page "https://nvie.com/posts/a-successful-git-branching-model/") (synopsis "Git extensions for Vincent Driessen's branching model") (description "Vincent Driessen's branching model is a git branching and release management strategy that helps developers keep track of features, hotfixes, and releases in bigger software projects. The git-flow library of git subcommands helps automate some parts of the flow to make working with it a lot easier.") (license license:bsd-2))) (define-public stgit (package (name "stgit") (version "1.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/ctmarinas/stgit") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1igljjpdgl4na1a5hi0nmg36ph0hw6hw8hhq5436fgcl8yjimyz3")))) (build-system python-build-system) (native-inputs (list perl)) (inputs (list git)) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'hard-code-version (lambda _ ;; setup.py tries to cleverly extract the version number from the ;; git history, which the source checkout lacks. Hard-code one. (substitute* "setup.py" (("get_ver\\(\\)") (format #f "'~a'" ,version))) #t)) (add-before 'check 'patch-tests (lambda _ (substitute* (list "t/t1900-mail.sh" "t/t7504-commit-msg-hook.sh") (("/bin/sh") (which "bash"))) #t)) (replace 'check (lambda _ (invoke "make" "PERL_PATH=perl" (string-append "SHELL_PATH=" (which "bash")) "test")))))) (home-page "https://stacked-git.github.io/") (synopsis "Stacked Git") (description "StGit is a command-line application that provides functionality similar to Quilt (i.e., pushing/popping patches to/from a stack), but using Git instead of @command{diff} and @command{patch}. StGit stores its patches in a Git repository as normal Git commits, and provides a number of commands to manipulate them in various ways.") (license license:gpl2))) (define-public vcsh (package (name "vcsh") (version "2.0.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/RichiH/vcsh") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "15lb09c2q261p1pp5r7j9k8389ybrd2q19xhnp1nnha6gs78i4wq")))) (build-system gnu-build-system) (native-inputs (list autoconf automake ;; for man page ronn-ng ;; for tests perl perl-test-harness perl-shell-command perl-test-most ;; for bash-completion pkg-config)) (inputs (list git)) (arguments '(#:phases (modify-phases %standard-phases (add-before 'bootstrap 'fix-version-gen (lambda _ (call-with-output-file ".tarball-version" (lambda (port) (display version port)))))) #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:test-target "test")) (home-page "https://github.com/RichiH/vcsh") (synopsis "Version control system for @code{$HOME}") (description "vcsh version-controls configuration files in several Git repositories, all in one single directory. They all maintain their working trees without clobbering each other or interfering otherwise. By default, all Git repositories maintained via vcsh store the actual files in @code{$HOME}, though this can be overridden.") (license license:gpl2+))) (define-public git-test-sequence (let ((commit "48e5a2f5a13a5f30452647237e23362b459b9c76")) (package (name "git-test-sequence") (version (string-append "20140312." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference ;; There are many other scripts in this directory; we ;; are interested in just one for this package. (url "https://github.com/dustin/bindir") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "1dcq0y16yznbv4k9h8gg90kv1gkn8r8dbvl4m2rpfd7q5nqhn617")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) #:builder (begin (use-modules (guix build utils)) (let* ((source (assoc-ref %build-inputs "source")) (output (assoc-ref %outputs "out")) (bindir (string-append output "/bin")) (script "git-test-sequence")) (install-file (string-append source "/" script) bindir) #t)))) (home-page "https://dustin.sallings.org/2010/03/28/git-test-sequence.html") (synopsis "Run a command over a sequence of commits") (description "git-test-sequence is similar to an automated git bisect except it’s linear. It will test every change between two points in the DAG. It will also walk each side of a merge and test those changes individually.") (license (license:x11-style "file://LICENSE"))))) (define* (make-gitolite #:optional (extra-inputs '())) "Make a gitolite package object with EXTRA-INPUTS added to the binary wrappers, to be used for optional gitolite extensions." (package (name "gitolite") (version "3.6.12") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/sitaramc/gitolite") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "05xw1pmagvkrbzga5pgl3xk9qyc6b5x73f842454f3w9ijspa8zy")))) (build-system gnu-build-system) (arguments (list #:tests? #f ; no tests #:phases #~(modify-phases %standard-phases (delete 'configure) (delete 'build) (add-before 'install 'patch-scripts (lambda* _ ;; This seems to take care of every shell script that ;; invokes Perl. (substitute* (find-files ".") ((" perl -") (string-append " " #$perl "/bin/perl" " -"))) (substitute* (find-files "src/triggers" ".*") ((" sed ") (string-append " " #$sed "/bin/sed" " "))) (substitute* '("src/triggers/post-compile/update-gitweb-access-list" "src/triggers/post-compile/ssh-authkeys-split" "src/triggers/upstream") ((" grep ") (string-append " " #$grep "/bin/grep" " "))) ;; Avoid references to the store in authorized_keys. ;; This works because gitolite-shell is in the PATH. (substitute* "src/triggers/post-compile/ssh-authkeys" (("\\$glshell \\$user") "gitolite-shell $user")))) (add-before 'install 'patch-source (lambda* _ ;; Gitolite uses cat to test the readability of the ;; pubkey (substitute* "src/lib/Gitolite/Setup.pm" (("\"cat ") (string-append "\"" #$coreutils "/bin/cat" " ")) (("\"ssh-keygen") (string-append "\"" #$openssh "/bin/ssh-keygen"))) (substitute* '("src/lib/Gitolite/Hooks/PostUpdate.pm" "src/lib/Gitolite/Hooks/Update.pm") (("/usr/bin/perl") (string-append #$perl "/bin/perl"))) (substitute* "src/lib/Gitolite/Common.pm" (("\"ssh-keygen") (string-append "\"" #$openssh "/bin/ssh-keygen")) (("\"logger\"") (string-append "\"" #$inetutils "/bin/logger\""))) (substitute* "src/lib/Gitolite/Cache.pm" (("/usr/sbin/redis-server") "redis-server")) (substitute* "src/commands/svnserve" (("/usr/bin/svnserve") "svnserve")))) (replace 'install (lambda* _ (let* ((sharedir (string-append #$output "/share/gitolite")) (bindir (string-append #$output "/bin"))) (mkdir-p sharedir) (mkdir-p bindir) (invoke "./install" "-to" sharedir) ;; Create symlinks for executable scripts in /bin. (for-each (lambda (script) (symlink (string-append sharedir "/" script) (string-append bindir "/" script))) '("gitolite" "gitolite-shell"))))) (add-after 'install 'wrap-scripts (lambda* _ (for-each (lambda (file-name) (wrap-program (string-append #$output file-name) `("PATH" ":" prefix ,(map (lambda (dir) (string-append dir "/bin")) (list #$output #$coreutils #$findutils #$git #$@extra-inputs))))) '("/bin/gitolite" "/bin/gitolite-shell"))))))) (inputs (append (list bash-minimal coreutils findutils git inetutils openssh perl) extra-inputs)) (home-page "https://gitolite.com") (synopsis "Git access control layer") (description "Gitolite is an access control layer on top of Git, providing fine access control to Git repositories.") (license license:gpl2))) (define-public gitolite (make-gitolite)) (define-public gitile (package (name "gitile") (version "0.1.4") (source (origin (method git-fetch) (uri (git-reference (url "https://git.lepiller.eu/git/gitile") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1wb1rajcrzdqjncv40s7hjsnvlh1gq4z9pn9gf210g1iy35vimmz")))) (build-system gnu-build-system) (arguments `(#:imported-modules ((guix build guile-build-system) ,@%gnu-build-system-modules) #:make-flags (list "GUILE_AUTO_COMPILE=0") #:phases (modify-phases %standard-phases (add-after 'install-bin 'wrap-program (lambda* (#:key inputs outputs #:allow-other-keys) (use-modules (guix build guile-build-system)) ;; Wrap the 'gitile' command to refer to the right modules. (let* ((out (assoc-ref outputs "out")) (commonmark (assoc-ref inputs "guile-commonmark")) (git (assoc-ref inputs "guile-git")) (bytes (assoc-ref inputs "guile-bytestructures")) (fibers (assoc-ref inputs "guile-fibers")) (gcrypt (assoc-ref inputs "guile-gcrypt")) (syntax-highlight (assoc-ref inputs "guile-syntax-highlight")) (deps (list out commonmark git bytes fibers gcrypt syntax-highlight)) (guile (assoc-ref inputs "guile")) (effective (target-guile-effective-version)) (mods (string-drop-right ;drop trailing colon (string-join deps (string-append "/share/guile/site/" effective ":") 'suffix) 1)) (objs (string-drop-right (string-join deps (string-append "/lib/guile/" effective "/site-ccache:") 'suffix) 1))) (wrap-program (string-append out "/bin/gitile") `("GUILE_LOAD_PATH" ":" prefix (,mods)) `("GUILE_LOAD_COMPILED_PATH" ":" prefix (,objs))))))))) (native-inputs (list autoconf automake guile-3.0 pkg-config)) (inputs (list guile-3.0 guile-commonmark guile-fibers guile-gcrypt guile-git guile-syntax-highlight-for-gitile gnutls)) (home-page "https://git.lepiller.eu/gitile") (synopsis "Simple Git forge written in Guile") (description "Gitile is a Git forge written in Guile that lets you visualize your public Git repositories on a web interface.") (license license:agpl3+))) (define-public pre-commit (package (name "pre-commit") ;formerly known as python-pre-commit (version "3.2.2") (source (origin (method git-fetch) ; no tests in PyPI release (uri (git-reference (url "https://github.com/pre-commit/pre-commit") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11zbnl08bqyl8s12i58szn5gcali4p6dwwbzln8bk92kb721s52r")) (modules '((guix build utils))) (snippet '(substitute* "setup.cfg" (("virtualenv>=20.10.0") ;our virtualenv (20.3.1) is fine "virtualenv>=20.0.8"))))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'check 'prepare-check-env (lambda _ ;; Change from /homeless-shelter to /tmp for write permission. (setenv "HOME" "/tmp") ;; Environment variables used in the tests. (setenv "GIT_AUTHOR_NAME" "Your Name") (setenv "GIT_COMMITTER_NAME" "Your Name") (setenv "GIT_AUTHOR_EMAIL" "you@example.com") (setenv "GIT_COMMITTER_EMAIL" "you@example.com") ;; Some tests still fail with PermissionError. Make the source ;; tree writable. (for-each make-file-writable (find-files ".")) ;; Some tests will need a working git repository. (invoke "git" "init") (invoke "git" "config" "--global" "user.name" "Your Name") (invoke "git" "config" "--global" "user.email" "you@example.com"))) (replace 'check (lambda* (#:key inputs outputs tests? #:allow-other-keys) (add-installed-pythonpath inputs outputs) (when tests? ;; The file below contains 30+ tests that fail because they ;; depend on tools from multiple languages (cargo, npm, cpan, ;; Rscript, etc). Other tests are passing, but it's more ;; convenient to skip the file than list 30 tests to skip. (invoke "pytest" "--ignore=tests/repository_test.py" ;; Ruby and Node tests require node and gem. "--ignore=tests/languages/node_test.py" "--ignore=tests/languages/ruby_test.py" ;; Skip lang-specific (network) tests added in 3.1.1 "--ignore=tests/languages/conda_test.py" "--ignore=tests/languages/coursier_test.py" "--ignore=tests/languages/dart_test.py" "--ignore=tests/languages/docker_test.py" "--ignore=tests/languages/docker_image_test.py" "--ignore=tests/languages/dotnet_test.py" "--ignore=tests/languages/golang_test.py" "--ignore=tests/languages/lua_test.py" "--ignore=tests/languages/perl_test.py" "--ignore=tests/languages/rust_test.py" "--ignore=tests/languages/swift_test.py" "-k" (string-append ;; TODO: these tests fail with AssertionError. It may ;; be possible to fix them. "not test_install_existing_hooks_no_overwrite" " and not test_uninstall_restores_legacy_hooks" " and not test_installed_from_venv" " and not test_healthy_venv_creator" " and not test_r_hook and not test_r_inline")))))))) (native-inputs `(("git" ,git-minimal) ("python-covdefaults" ,python-covdefaults) ("python-coverage" ,python-coverage) ("python-distlib" ,python-distlib) ("python-pytest" ,python-pytest) ("python-pytest-env" ,python-pytest-env) ("python-re-assert" ,python-re-assert) ("which" ,which))) ;; Propagate because pre-commit is also used as a module. (propagated-inputs (list python-cfgv python-identify python-nodeenv python-pyyaml python-virtualenv)) (home-page "https://pre-commit.com/") (synopsis "Framework for managing and maintaining pre-commit hooks") (description "Pre-commit is a multi-language package manager for pre-commit hooks. You specify a list of hooks you want and pre-commit manages the installation and execution of any hook written in any language before every commit.") (license license:expat))) (define-public python-pre-commit (deprecated-package "python-pre-commit" pre-commit)) (define-public mercurial (package (name "mercurial") (version "6.2.2") (source (origin (method url-fetch) (uri (string-append "https://www.mercurial-scm.org/" "release/mercurial-" version ".tar.gz")) (patches (search-patches "mercurial-hg-extension-path.patch" "mercurial-openssl-compat.patch")) (sha256 (base32 "1pr00hdk3l9095fhq6302fgj0wmbqhqs93y4r457ba4pyjjrvyly")) (modules '((guix build utils))) (snippet '(substitute* (find-files "tests" "\\.(t|sh)$") ;; grep 3.8 emits deprecation warnings for 'egrep' and ;; 'fgrep' which breaks expected test output. (("egrep") "grep -E") (("fgrep") "grep -F"))))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure) (add-after 'unpack 'patch-tests (lambda _ (substitute* (find-files "tests" "\\.(t|py)$") (("/bin/sh") (which "sh")) (("/usr/bin/env") (which "env"))))) (replace 'check (lambda* (#:key tests? #:allow-other-keys) (with-directory-excursion "tests" ;; The following tests are known to fail. (for-each delete-file '(;; XXX: This test calls 'run-tests.py --with-hg= ;; `which hg`' and fails because there is no hg on ;; PATH from before (that's why we are building it!)? "test-hghave.t" ;; This test creates a shebang spanning multiple ;; lines which is difficult to substitute. It ;; only tests the test runner itself, which gets ;; thoroughly tested during the check phase anyway. "test-run-tests.t" ;; These tests fail because the program is not ;; connected to a TTY in the build container. "test-nointerrupt.t" "test-transaction-rollback-on-sigpipe.t" ;; FIXME: This gets killed but does not receive an interrupt. "test-commandserver.t" ;; These tests get unexpected warnings about using ;; deprecated functionality in Python, but otherwise ;; succeed; try enabling for later Mercurial versions. "test-demandimport.py" "test-patchbomb-tls.t" ;; Similarly, this gets a more informative error ;; message from Python 3.10 than it expects. "test-http-bad-server.t" ;; Only works when run in a hg-repo, not in an ;; extracted tarball "test-doctest.py" ;; TODO: the fqaddr() call fails in the build ;; container, causing these server tests to fail. "test-hgwebdir.t" "test-http-branchmap.t" "test-pull-bundle.t" "test-push-http.t" "test-serve.t" "test-subrepo-deep-nested-change.t" "test-subrepo-recursion.t")) (when tests? (invoke "./run-tests.py" ;; ‘make check’ does not respect ‘-j’. (string-append "-j" (number->string (parallel-job-count))) ;; The default time-outs are too low for many systems. ;; Raise them generously: Guix enforces its own. "--timeout" "86400" "--slowtimeout" "86400" ;; The test suite takes a long time and produces little ;; output by default. Prevent timeouts due to silence. "-v")))))))) (native-inputs (list python-docutils ;; The following inputs are only needed to run the tests. python-nose unzip which)) (inputs (list python-wrapper)) ;; Find third-party extensions. (native-search-paths (list (search-path-specification (variable "HGEXTENSIONPATH") (files '("lib/python3.10/site-packages/hgext3rd"))))) (home-page "https://www.mercurial-scm.org/") (synopsis "Decentralized version control system") (description "Mercurial is a free, distributed source control management tool. It efficiently handles projects of any size and offers an easy and intuitive interface.") (license license:gpl2+))) (define-public python-hg-evolve (package (name "python-hg-evolve") (version "10.3.2") (source (origin (method hg-fetch) (uri (hg-reference (url "https://www.mercurial-scm.org/repo/evolve") (changeset version))) (file-name (hg-file-name name version)) (sha256 (base32 "0qgk39s5pwxbshfa6x1f1ccxahja3fs265dddxy6q99spy3b3x5h")))) (build-system python-build-system) (arguments ;; Tests need mercurial source code. '(#:tests? #f)) (propagated-inputs (list mercurial)) (home-page "https://www.mercurial-scm.org/doc/evolution/") (synopsis "Flexible evolution of Mercurial history") (description "Evolve is a Mercurial extension for faster and safer mutable history. It implements the changeset evolution concept for Mercurial.") (license license:gpl2))) (define-public hg-commitsigs ;; Latest tag is 11 years old. (let ((changeset "b53eb6862bff") (revision "0")) (package (name "hg-commitsigs") (version (git-version "0.1.0" revision changeset)) (source (origin (method hg-fetch) (uri (hg-reference (url "https://foss.heptapod.net/mercurial/commitsigs") (changeset changeset))) (file-name (git-file-name name version)) (sha256 (base32 "059gm66q06m6ayl4brsc517zkw3ahmz249b6xm1m32ac5y24wb9x")))) (build-system copy-build-system) (arguments `(#:imported-modules ((guix build python-build-system) ,@%copy-build-system-modules) #:modules ((srfi srfi-1) (guix build python-build-system) ;; Don't use `%copy-build-system-modules' because ;; `standard-phases' from (guix build gnu-build-system) ;; shadows the one from (guix build copy-build-system), ;; which is the one we actually want. (guix build copy-build-system) ((guix build gnu-build-system) #:prefix gnu) (guix build utils) (guix build gremlin) (ice-9 ftw) (guix elf)) #:phases (modify-phases %standard-phases (add-after 'unpack 'patch-paths (lambda* (#:key inputs #:allow-other-keys) (let ((gpg (search-input-file inputs "/bin/gpg")) (openssl (search-input-file inputs "/bin/openssl"))) (substitute* "commitsigs.py" (("b'gpg',") (string-append "b'" gpg "',")) (("b'openssl',") (string-append "b'" openssl "',"))))))) #:install-plan `(("commitsigs.py" ,(string-append "lib/python" (python-version (assoc-ref %build-inputs "python")) "/site-packages/hgext3rd/commitsigs.py"))))) (native-inputs (list python)) (inputs (list gnupg openssl)) (home-page "https://foss.heptapod.net/mercurial/commitsigs") (synopsis "Automatic signing of changeset hashes") (description "This package provides a Mercurial extension for signing the changeset hash of commits. The signure is embedded directly in the changeset itself; there won't be any extra commits. Either GnuPG or OpenSSL can be used for signing.") (license license:gpl2)))) ;per commitsigs.py (define-public neon (package (name "neon") (version "0.32.2") (source (origin (method url-fetch) (uri (string-append "https://notroj.github.io/neon/neon-" version ".tar.gz")) (sha256 (base32 "11mj5zpp317dmds874wfwcpgij9i3scaahdi1xfzr5b2ii36crcq")))) (build-system gnu-build-system) (native-inputs (list perl pkg-config)) (inputs (list libxml2 openssl zlib)) (arguments `(;; FIXME: Add tests once reverse address lookup is fixed in glibc, see ;; https://sourceware.org/bugzilla/show_bug.cgi?id=16475 #:tests? #f #:configure-flags '("--enable-shared" "--disable-static" ;; requires libgnutils-config, deprecated ;; in gnutls 2.8. ; "--with-ssl=gnutls"))) "--with-ssl=openssl"))) (home-page "https://notroj.github.io/neon/") (synopsis "HTTP and WebDAV client library") (description "Neon is an HTTP and WebDAV client library, with a C interface and the following features: @enumerate @item High-level wrappers for common HTTP and WebDAV operations (GET, MOVE, DELETE, etc.); @item low-level interface to the HTTP request/response engine, allowing the use of arbitrary HTTP methods, headers, etc.; @item authentication support including Basic and Digest support, along with GSSAPI-based Negotiate on Unix, and SSPI-based Negotiate/NTLM on Win32; @item SSL/TLS support using OpenSSL or GnuTLS, exposing an abstraction layer for verifying server certificates, handling client certificates, and examining certificate properties, smartcard-based client certificates are also supported via a PKCS#11 wrapper interface; @item abstract interface to parsing XML using libxml2 or expat, and wrappers for simplifying handling XML HTTP response bodies; @item WebDAV metadata support, wrappers for PROPFIND and PROPPATCH to simplify property manipulation. @end enumerate\n") (license license:gpl2+))) ; for documentation and tests; source under lgpl2.0+ (define-public subversion (package (name "subversion") (version "1.14.2") (source (origin (method url-fetch) (uri (string-append "mirror://apache/subversion/" "subversion-" version ".tar.bz2")) (sha256 (base32 "0a6csc84hfymm8b5cnvq1n1p3rjjf33qy0z7y1k8lwkm1f6hw4y9")))) (build-system gnu-build-system) (arguments (list ;; Running the tests in parallel causes test failures on i686-linux. ;; The issue was reported to users@subversion.apache.org, as suggested ;; at https://subversion.apache.org/reporting-issues. #:parallel-tests? #f #:configure-flags #~(list "--enable-static=no") #:phases #~(modify-phases %standard-phases (add-after 'configure 'patch-libtool-wrapper-ls (lambda* (#:key inputs #:allow-other-keys) ;; This substitution allows tests svnauthz_tests and svnlook_tests ;; to pass. These tests execute svnauthz and svnlook through ;; their libtool wrapper scripts from svn hooks, whose empty ;; environments cause "ls: command not found" errors. It would be ;; nice if this fix ultimately made its way into libtool. (substitute* "libtool" (("\\\\`ls") (string-append "\\`" (search-input-file inputs "bin/ls")))))) (add-before 'build 'patch-test-sh (lambda _ (substitute* "subversion/tests/libsvn_repos/repos-test.c" (("#!/bin/sh") (string-append "#!" (which "sh")))))) (add-before 'check 'set-PARALLEL (lambda* (#:key parallel-tests? #:allow-other-keys) (if parallel-tests? (setenv "PARALLEL" (number->string (parallel-job-count))) (simple-format #t "parallel-tests? are disabled\n")))) (add-after 'install 'install-perl-bindings (lambda _ ;; Follow the instructions from 'subversion/bindings/swig/INSTALL'. (invoke "make" "swig-pl-lib") ;; FIXME: Test failures. ;; (invoke "make" "check-swig-pl") (invoke "make" "install-swig-pl-lib") ;; Set the right installation prefix. (with-directory-excursion "subversion/bindings/swig/perl/native" (invoke "perl" "Makefile.PL" "NO_PERLLOCAL=1" (string-append "PREFIX=" #$output)) (invoke "make" "install" (string-append "OTHERLDFLAGS=-Wl,-rpath=" #$output "/lib")))))))) (native-inputs (list pkg-config ;; For the Perl bindings. swig)) (inputs (list apr apr-util lz4 perl python-wrapper serf sqlite utf8proc zlib)) (home-page "https://subversion.apache.org/") (synopsis "Revision control system") (description "@dfn{Subversion} (svn) exists to be recognized and adopted as a centralized version control system characterized by its reliability as a safe haven for valuable data; the simplicity of its model and usage; and its ability to support the needs of a wide variety of users and projects, from individuals to large-scale enterprise operations.") (license license:asl2.0))) (define-public rcs (package (name "rcs") (version "5.10.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/rcs/rcs-" version ".tar.lz")) (sha256 (base32 "1iac4d1dhsfy5zb0n3p605pihdq702v06r4g8vi8b2saf88gxpa3")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'install-rcsfreeze (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (man1 (string-append out "/share/man/man1"))) (chmod "src/rcsfreeze" #o755) (install-file "src/rcsfreeze" bin) (install-file "man/rcsfreeze.1" man1))))))) (native-inputs (list ed lzip)) (home-page "https://www.gnu.org/software/rcs/") (synopsis "Per-file local revision control system") (description "RCS is the original Revision Control System. It works on a file-by-file basis, in contrast to subsequent version control systems such as CVS, Subversion, and Git. This can make it suitable for system administration files, for example, which are often inherently local to one machine.") (license license:gpl3+))) (define-public rcs-blame (package (name "rcs-blame") (version "1.3.1-20210207") (source (origin (method url-fetch) (uri (string-append "https://invisible-mirror.net/archives/rcs-blame/blame-" version ".tgz")) (sha256 (base32 "1j0brsvdx3hlbwchddafh8r2xmxv5vg4ahpd68v4bb9xhcq6pcih")))) (build-system gnu-build-system) (home-page "https://invisible-island.net/rcs-blame/rcs-blame.html") (synopsis "Display the last modification for each line in an RCS file") (description "@code{blame} outputs an annotated revision from each RCS file. An annotated RCS file describes the revision and date in which each line was added to the file, and the author of each line.") (license license:gpl2+))) (define-public rcshist (package (name "rcshist") (version "1.04-20190106") (source (origin (method url-fetch) (uri (string-append "https://invisible-mirror.net/archives/rcshist/rcshist-" version ".tgz")) (sha256 (base32 "01ab3xwgm934lxr8bm758am3vxwx4hxx7cc9prbgqj5nh30vdg1n")))) (build-system gnu-build-system) (home-page "https://invisible-island.net/rcshist/rcshist.html") (synopsis "Display RCS change history") (description "The @code{rcshist} utility displays the complete revision history of a set of RCS files including log messages and patches. It can also display the patch associated with a particular revision of an RCS file.") (license (list license:bsd-2 license:bsd-3)))) ; bsd_queue.h (define-public cvs (package (name "cvs") (version "1.12.13") (source (origin (method url-fetch) (uri (string-append "https://ftp.gnu.org/non-gnu/cvs/source/feature/" version "/cvs-" version ".tar.bz2")) (patches (search-patches "cvs-CVE-2017-12836.patch")) (sha256 (base32 "0pjir8cwn0087mxszzbsi1gyfc6373vif96cw4q3m1x6p49kd1bq")))) (build-system gnu-build-system) (arguments ;; XXX: The test suite looks flawed, and the package is obsolete anyway. '(#:tests? #f #:configure-flags (list "--with-external-zlib"))) (inputs (list zlib nano)) ; the default editor (home-page "https://cvs.nongnu.org") (synopsis "Historical centralized version control system") (description "CVS is a version control system, an important component of Source Configuration Management (SCM). Using it, you can record the history of sources files, and documents. It fills a similar role to the free software RCS, PRCS, and Aegis packages.") (license license:gpl1+))) (define-public cvs-fast-export (package (name "cvs-fast-export") (version "1.56") (source (origin (method url-fetch) (uri (string-append "http://www.catb.org/~esr/cvs-fast-export/" "cvs-fast-export-" version ".tar.gz")) (sha256 (base32 "058bzp3npng48ascls943m16kgvrl0h197a10brf7mvx8zpfc7sc")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (delete 'configure)) ; no configure script #:parallel-build? #f ; parallel a2x commands fail spectacularly #:make-flags (list "CC=gcc" (string-append "prefix?=" (assoc-ref %outputs "out"))))) (inputs `(("git" ,git) ("python" ,python-wrapper))) (native-inputs (list asciidoc ;; These are needed for the tests. cvs rcs)) (home-page "http://www.catb.org/esr/cvs-fast-export/") (synopsis "Export an RCS or CVS history as a fast-import stream") (description "This program analyzes a collection of RCS files in a CVS repository (or outside of one) and, when possible, emits an equivalent history in the form of a fast-import stream. Not all possible histories can be rendered this way; the program tries to emit useful warnings when it can't. The program can also produce a visualization of the resulting commit directed acyclic graph (DAG) in the input format of @uref{http://www.graphviz.org, Graphviz}. The package also includes @command{cvssync}, a tool for mirroring masters from remote CVS hosts.") (license license:gpl2+))) (define-public vc-dwim (package (name "vc-dwim") (version "1.10") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/vc-dwim/vc-dwim-" version ".tar.xz")) (sha256 (base32 "0am6axxdvkm2vwgg0gjrd930yv4dlsdbf0rdv0zh5bhy1ir64rph")))) (build-system gnu-build-system) (inputs (list perl)) (native-inputs (list emacs-minimal ; for `ctags' inetutils)) ; for `hostname', used in the tests (home-page "https://www.gnu.org/software/vc-dwim/") (synopsis "Version-control-agnostic ChangeLog diff and commit tool") (description "The vc-dwim package contains two tools, \"vc-dwim\" and \"vc-chlog\". vc-dwim is a tool that simplifies the task of maintaining a ChangeLog and using version control at the same time, for example by printing a reminder when a file change has been described in the ChangeLog but the file has not been added to the VC. vc-chlog scans changed files and generates standards-compliant ChangeLog entries based on the changes that it detects.") (license license:gpl3+))) (define-public diffstat (package (name "diffstat") (version "1.65") (source (origin (method url-fetch) (uri (list (string-append "ftp://invisible-island.net/diffstat/" "diffstat-" version ".tgz") (string-append "http://invisible-mirror.net/archives/diffstat/" "diffstat-" version ".tgz"))) (sha256 (base32 "12m2aysq6syw83bn4gqhpm284a2ran8w6m8pja2wvsvdj8j79wlc")))) (build-system gnu-build-system) (home-page "https://invisible-island.net/diffstat/") (synopsis "Make histograms from the output of @command{diff}") (description "Diffstat reads the output of @command{diff} and displays a histogram of the insertions, deletions, and modifications per file. It is useful for reviewing large, complex patch files.") (license (license:x11-style "file://COPYING")))) (define-public cssc (package (name "cssc") (version "1.4.1") (source (origin (method url-fetch) (uri (string-append "mirror://gnu/" name "/CSSC-" version ".tar.gz")) (sha256 (base32 "1vsisqq573xjr2qpn19iwmpqgl3mq03m790akpa4rvj60b4d1gni")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'check 'precheck (lambda _ (begin (substitute* "tests/common/test-common" (("/bin/pwd") (which "pwd"))) (substitute* "tests/prt/all-512.sh" (("/bin/sh") (which "sh"))) ;; XXX: This test has no hope of passing until there is a "nogroup" ;; entry (or at least some group to which the guix builder does ;; not belong) in the /etc/group file of the build environment. ;; Currently we do not have such a group. Disable this test for now. (substitute* "tests/Makefile" (("test-delta ") "")))))))) ;; These are needed for the tests (native-inputs (list git cvs)) (home-page "https://www.gnu.org/software/cssc/") (synopsis "File-based version control like SCCS") (description "GNU CSSC provides a replacement for the legacy Unix source code control system SCCS. This allows old code still under that system to be accessed and migrated on modern systems.") (license license:gpl3+))) ;; This package can unfortunately work only in -TEST mode, since Aegis ;; requires that it is installed setuid root. (define-public aegis (package (name "aegis") (version "4.24") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/aegis/aegis/" version "/aegis-" version ".tar.gz")) (sha256 (base32 "18s86ssarfmc4l17gbpzybca29m5wa37cbaimdji8czlcry3mcjl")) (patches (search-patches "aegis-perl-tempdir1.patch" "aegis-perl-tempdir2.patch" "aegis-test-fixup-1.patch" "aegis-test-fixup-2.patch" "aegis-constness-error.patch")))) (build-system gnu-build-system) (inputs `(("e2fsprogs" ,e2fsprogs) ("curl" ,curl) ("file" ,file) ("libxml2" ,libxml2) ("zlib" ,zlib) ("gettext" ,gettext-minimal))) (native-inputs (list bison groff perl ;; Various tests require the following: cvs flex cook subversion rcs ed)) (arguments `(#:configure-flags (list "--with-no-aegis-configured" "--sharedstatedir=/var/com/aegis" ;; Uses the old 'throw()' specifier with 'new' ;; which changed in C++11. "CXXFLAGS=-std=c++03") #:parallel-build? #f ; There are some nasty racy rules in the Makefile. #:phases (modify-phases %standard-phases (add-before 'configure 'pre-conf (lambda _ (substitute* (append '("configure" "etc/check-tar-gz.sh" "etc/patches.sh" "etc/test.sh" "script/aexver.in" "script/aebisect.in" "script/aeintegratq.in" "script/tkaegis.in" "script/test_funcs.in" "web/eg_oss_templ.sh" "web/webiface.html" "libaegis/getpw_cache.cc") (find-files "test" "\\.sh")) (("/bin/sh") (which "sh"))) (setenv "SH" (which "sh")) #t)) (replace 'check (lambda _ (let ((home (string-append (getcwd) "/my-new-home"))) ;; Some tests need to write to $HOME. (mkdir home) (setenv "HOME" home) ;; This test assumes that flex has been symlinked to "lex". (substitute* "test/00/t0011a.sh" (("type lex") "type flex")) ;; XXX Disable tests that fail, for unknown reasons, ‘for now’. (for-each (lambda (test) (substitute* "Makefile" (((string-append "test/" test "\\.ES ")) ""))) (list "00/t0011a" "00/t0049a" "01/t0196a")) ;; The author decided to call the check rule "sure". (invoke "make" "sure"))))))) (home-page "https://sourceforge.net/projects/aegis/") (synopsis "Project change supervisor") (description "Aegis is a project change supervisor, and performs some of the Software Configuration Management needed in a CASE environment. Aegis provides a framework within which a team of developers may work on many changes to a program independently, and Aegis coordinates integrating these changes back into the master source of the program, with as little disruption as possible. Resolution of contention for source files, a major headache for any project with more than one developer, is one of Aegis's major functions.") (license license:gpl3+))) (define-public tig (package (name "tig") (version "2.5.8") (source (origin (method url-fetch) (uri (string-append "https://github.com/jonas/tig/releases/download/tig-" version "/tig-" version ".tar.gz")) (sha256 (base32 "14b38200bmwvi3030hqnwdsp34854ck3bzncj0wlljnpmr10l3mp")) (modules '((guix build utils))) (snippet '(begin ;; TODO: Delete and rebuild doc/*.(1|5|7). (for-each delete-file (find-files "doc" "\\.html$")))))) (build-system gnu-build-system) (native-inputs (list asciidoc xmlto)) (inputs (list ncurses readline)) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'install-doc (lambda _ (invoke "make" "install-doc"))) (add-after 'install 'install-completions (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (share (string-append out "/share"))) (mkdir-p (string-append share "/bash-completion/completions")) (mkdir-p (string-append share "/zsh/site-functions")) (copy-file "contrib/tig-completion.bash" (string-append share "/bash-completion/completions/tig")) (copy-file "contrib/tig-completion.zsh" (string-append share "/zsh/site-functions/_tig")))))) #:test-target "test" #:tests? #f)) ; tests require access to /dev/tty (home-page "https://jonas.github.io/tig/") (synopsis "Ncurses-based text user interface for Git") (description "Tig is an ncurses text user interface for Git, primarily intended as a history browser. It can also stage hunks for commit, or colorize the output of the @code{git} command.") (license license:gpl2+))) (define-public findnewest (package (name "findnewest") (version "0.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/0-wiz-0/findnewest") (commit (string-append "findnewest-" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1x1cbn2b27h5r0ah5xc06fkalfdci2ngrgd4wibxjw0h88h0nvgq")))) (build-system gnu-build-system) (native-inputs (list autoconf automake)) (home-page "https://github.com/0-wiz-0/findnewest/releases") (synopsis "Print the modification time of the latest file") (description "Recursively find the newest file in a file tree and print its modification time.") (license license:bsd-2))) (define-public myrepos (package (name "myrepos") (version "1.20180726") (source (origin (method git-fetch) (uri (git-reference (url "git://myrepos.branchable.com/myrepos") (commit version))) (file-name (string-append name "-" version "-checkout")) (sha256 (base32 "0jphw61plm8cgklja6hs639xhdvxgvjwbr6jpvjwpp7hc5gmhms5")))) (build-system gnu-build-system) (arguments '(#:test-target "test" #:make-flags (list (string-append "PREFIX=" %output)) #:phases (modify-phases %standard-phases (delete 'configure) (add-after 'install 'wrap-webcheckout (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (wrap-program (string-append out "/bin/webcheckout") `("PERL5LIB" ":" prefix ,(map (lambda (i) (string-append (assoc-ref inputs i) "/lib/perl5/site_perl")) '("perl-encode-locale" "perl-http-date" "perl-http-message" "perl-html-parser" "perl-libwww" "perl-uri" "perl-try-tiny")))) #t)))))) (inputs (list perl perl-encode-locale perl-html-parser perl-http-date perl-http-message perl-libwww perl-try-tiny perl-uri)) (home-page "https://myrepos.branchable.com/") (synopsis "Multiple repository management tool") (description "Myrepos provides the @code{mr} command, which maps an operation (e.g., fetching updates) over a collection of version control repositories. It supports a large number of version control systems: Git, Subversion, Mercurial, Bazaar, Darcs, CVS, Fossil, and Veracity.") (license license:gpl2+))) (define-public grokmirror (package (name "grokmirror") (version "2.0.11") (source (origin (method git-fetch) (uri (git-reference (url (string-append "https://git.kernel.org/pub/scm/" "utils/grokmirror/grokmirror.git")) (commit (string-append "v" version)))) (file-name (string-append name "-" version "-checkout")) (sha256 (base32 "0c6nnfzzyl247r1dcjnsyx16d34nyra9ikjjhi0xzlrbiwnb0w32")))) (build-system python-build-system) (arguments `(#:tests? #f ; no test suite #:phases (modify-phases %standard-phases (add-after 'install 'install-manpages (lambda* (#:key outputs #:allow-other-keys) (let* ((man (string-append (assoc-ref outputs "out") "/man/man1/"))) (mkdir-p man) (for-each (lambda (file) (install-file file man)) (find-files "." "\\.1$")))))))) (propagated-inputs (list python-packaging python-requests)) (home-page "https://git.kernel.org/pub/scm/utils/grokmirror/grokmirror.git") (synopsis "Framework to smartly mirror git repositories") (description "Grokmirror enables replicating large git repository collections efficiently. Mirrors decide to clone and update repositories based on a manifest file published by servers.") (license license:gpl3+))) (define-public patatt (package (name "patatt") (version "0.4.9") (source (origin (method url-fetch) (uri (pypi-uri "patatt" version)) (sha256 (base32 "0fpbkmdlnz9s1lakw11jlrzpz4mb6f4dksdiir9g1ppq0g34sy58")))) (build-system python-build-system) (arguments '(#:tests? #f)) ; No tests. (propagated-inputs (list python-pynacl)) (home-page "https://git.kernel.org/pub/scm/utils/patatt/patatt.git") (synopsis "Tool for cryptographic patch attestation") (description "This utility provides end-to-end cryptographic attestation of patches sent via mail. It does so by adapting the DKIM email signature standard to include cryptographic signatures via the X-Developer-Signature email header.") (license license:expat-0))) (define-public b4 (package (name "b4") (version "0.8.0") (source (origin (method url-fetch) (uri (pypi-uri "b4" version)) (sha256 (base32 "115ysciq15sxc8fd9hf7p0f4wnd5xapcfkmq8g33y1c8nbdxclbx")))) (build-system python-build-system) (arguments (list #:tests? #f ;no tests #:phases #~(modify-phases %standard-phases ;; XXX: dnspython attempts to read /etc/resolv.conf when loading ;; resolver.py, which breaks the sanity check in dependent ;; packages. This should rather be fixed in dnspython. (delete 'sanity-check)))) (inputs (list python-dkimpy python-dnspython python-requests)) (propagated-inputs (list patatt)) (home-page "https://git.kernel.org/pub/scm/utils/b4/b4.git") (synopsis "Tool for working with patches in public-inbox archives") (description "The @code{b4} command is designed to make it easier to participate in patch-based workflows for projects that have public-inbox archives. Features include: @itemize @item downloading a thread's mbox given a message ID @item processing an mbox so that is ready to be fed to @code{git-am} @item creating templated replies for processed patches and pull requests @item submitting cryptographic attestation for patches. @end itemize") (license license:gpl2+))) (define-public git-annex-remote-rclone (package (name "git-annex-remote-rclone") (version "0.6") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/DanielDent/git-annex-remote-rclone") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0j0hlxji8d974fq7zd4xc02n0jpi31ylhxc7z4zp8iiwad5mkpxp")))) (build-system trivial-build-system) (arguments `(#:modules ((guix build utils)) #:builder (begin (use-modules (guix build utils)) (let ((bash (search-input-file %build-inputs "/bin/bash")) (rclone (search-input-file %build-inputs "/bin/rclone"))) (copy-file (string-append (assoc-ref %build-inputs "source") "/git-annex-remote-rclone") "git-annex-remote-rclone") (substitute* "git-annex-remote-rclone" (("/bin/bash") bash) (("runcmd rclone") (string-append "runcmd " rclone))) (install-file "git-annex-remote-rclone" (string-append %output "/bin")) #t)))) (inputs (list bash rclone)) (home-page "https://github.com/DanielDent/git-annex-remote-rclone") (synopsis "Use rclone-supported cloud storage providers with git-annex") (description "This wrapper around rclone makes any destination supported by rclone usable with git-annex.") (license license:gpl3+))) (define-public fossil (package (name "fossil") (version "2.20") (source (origin (method url-fetch) (uri (string-append "https://www.fossil-scm.org/home/tarball/" "210e89a0597f225f49722b096cf5563bf193e920e02a9bd38503a906deacd416" "/fossil-src-" version ".tar.gz")) ;; XXX: Currently the above hash must be manually updated. (sha256 (base32 "08g7img88n2nwcdkpzmg4aqbp2iy40nllgas53502dspm97ym4h8")) (modules '((guix build utils))) (snippet '(delete-file-recursively "compat")))) (build-system gnu-build-system) (native-inputs (list tcl ;for configuration only which ;for tests only ed)) ;ditto (inputs (list openssl zlib sqlite)) (arguments `(#:configure-flags (list "--with-openssl=auto" "--disable-internal-sqlite") #:test-target "test" #:phases (modify-phases %standard-phases (add-after 'patch-source-shebangs 'patch-sh (lambda _ (substitute* '("auto.def") (("/bin/sh") (which "sh"))))) (replace 'configure (lambda* (#:key outputs (configure-flags '()) #:allow-other-keys) ;; The 'configure' script is not an autoconf script and ;; chokes on unrecognized options. (apply invoke "./configure" (string-append "--prefix=" (assoc-ref outputs "out")) configure-flags))) (add-before 'check 'test-setup (lambda _ (setenv "USER" "guix") (setenv "TZ" "UTC")))))) (home-page "https://fossil-scm.org") (synopsis "Software configuration management system") (description "Fossil is a distributed source control management system which supports access and administration over HTTP CGI or via a built-in HTTP server. It has a built-in wiki, built-in file browsing, built-in tickets system, etc.") (properties '((release-monitoring-url . "https://fossil-scm.org/home/uv/latest-release.md"))) (license (list license:public-domain ;src/miniz.c, src/shell.c license:bsd-2)))) (define-public stagit (package (name "stagit") (version "1.0") (source (origin (method git-fetch) (uri (git-reference (url "git://git.codemadness.org/stagit") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0j2242vx5pbwdv79gcjxdbrwii48qphr8gk1lk7szj2irxdql171")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; No tests #:make-flags (list (string-append "CC=" ,(cc-for-target)) (string-append "PREFIX=" %output)) #:phases (modify-phases %standard-phases (delete 'configure)))) ; No configure script (inputs (list libgit2)) (home-page "https://git.codemadness.org/stagit/") (synopsis "Static git page generator") (description "Stagit creates static pages for git repositories, the results can be served with a HTTP file server of your choice.") (license license:expat))) (define-public gource (package (name "gource") (version "0.51") (source (origin (method url-fetch) (uri (string-append "https://github.com/acaudwell/Gource/releases/download" "/gource-" version "/gource-" version ".tar.gz")) (sha256 (base32 "16p7b1x4r0915w883lp374jcdqqja37fnb7m8vnsfnl2n64gi8qr")))) (build-system gnu-build-system) (arguments `(#:configure-flags (list (string-append "--with-boost-libdir=" (assoc-ref %build-inputs "boost") "/lib")))) (native-inputs (list pkg-config)) (inputs (list boost ftgl glew glm glu libpng mesa pcre (sdl-union (list sdl2 sdl2-image)))) (home-page "https://gource.io/") (synopsis "3D visualisation tool for source control repositories") (description "@code{gource} provides a software version control visualization. The repository is displayed as a tree where the root of the repository is the centre, directories are branches and files are leaves. Contributors to the source code appear and disappear as they contribute to specific files and directories.") (license license:gpl3+))) (define-public src (package (name "src") (version "1.31") (source (origin (method url-fetch) (uri (string-append "http://www.catb.org/~esr/src/src-" version ".tar.gz")) (sha256 (base32 "1p8f5xc6k4jrli3iimi64ng11c246qqwsw9bqrrqkrmhvqdh4kcv")))) (build-system gnu-build-system) (arguments '(#:make-flags (list (string-append "prefix=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure) ; no 'configure' script (add-after 'install 'wrap-program (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (prog (string-append out "/bin/src")) (rcs (assoc-ref inputs "rcs"))) (wrap-program prog `("PATH" ":" prefix (,(string-append rcs "/bin")))) #t))) (replace 'check (lambda _ (setenv "HOME" (getenv "TMPDIR")) (invoke "git" "config" "--global" "user.name" "guix") (invoke "git" "config" "--global" "user.email" "guix") (invoke "./srctest")))))) (native-inputs ;; For testing. (list git perl)) (inputs `(("cssc" ,cssc) ("python" ,python-wrapper) ("rcs" ,rcs))) (synopsis "Simple revision control") (home-page "http://www.catb.org/~esr/src/") (description "SRC (or src) is simple revision control, a version-control system for single-file projects by solo developers and authors. It modernizes the venerable RCS, hence the anagrammatic acronym. The design is tuned for use cases like all those little scripts in your @file{~/bin} directory, or a directory full of HOWTOs.") (license license:bsd-2))) (define-public git-when-merged ;; Use an unreleased version to get a PY3 compatibility fix. (let ((commit "ab6af7865a0ba55ba364a6c507e0be6f84f31c6d")) (package (name "git-when-merged") (version (string-append "1.2.0-" (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/mhagger/git-when-merged/") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0iyk2psf97bc9h43m89p3xjmm79fsx99i7px29g4lcnmdy5kmz0p")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; there are no tests #:phases (modify-phases %standard-phases (delete 'configure) (delete 'build) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (install-file "bin/git-when-merged" (string-append (assoc-ref outputs "out") "/bin")) #t)) (add-before 'install 'patch-git (lambda* (#:key inputs #:allow-other-keys) (let ((git (search-input-file inputs "/bin/git"))) (substitute* "bin/git-when-merged" (("'git'") (string-append "'" git "'"))) #t))) (add-after 'install 'wrap-script (lambda* (#:key outputs #:allow-other-keys) (wrap-program (string-append (assoc-ref outputs "out") "/bin/git-when-merged") `("GUIX_PYTHONPATH" ":" prefix (,(getenv "GUIX_PYTHONPATH")))) #t))))) (inputs `(("git" ,git) ("python" ,python-wrapper))) (home-page "https://github.com/mhagger/git-when-merged") (synopsis "Determine when a commit was merged into a Git branch") (description "This Git extension defines a subcommand, @code{when-merged}, whose core operation is to find the merge that brought a given commit into the specified ref(s). It has various options that control how information about the merge is displayed.") (license license:gpl2+)))) (define-public git-imerge (package (name "git-imerge") (version "1.1.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/mhagger/git-imerge") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0vi1w3f0yk4gqhxj2hzqafqq28rihyhyfnp8x7xzib96j2si14a4")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; only manual test scripts #:make-flags (list (string-append "DESTDIR=" %output) "PREFIX=") #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'install 'patch-git (lambda* (#:key inputs #:allow-other-keys) (let ((git (search-input-file inputs "/bin/git"))) (substitute* "git-imerge" (("'git'") (string-append "'" git "'"))) #t))) (add-after 'install 'wrap-script (lambda* (#:key outputs #:allow-other-keys) (wrap-program (string-append (assoc-ref outputs "out") "/bin/git-imerge") `("GUIX_PYTHONPATH" ":" prefix (,(getenv "GUIX_PYTHONPATH")))) #t))))) (inputs `(("git" ,git) ("python" ,python-wrapper))) (home-page "https://github.com/mhagger/git-imerge") (synopsis "Incremental merge for Git") (description "This Git extension defines a subcommand, @code{imerge}, which performs an incremental merge between two branches. Its two primary design goals are to reduce the pain of resolving merge conflicts by finding the smallest possible conflicts and to allow a merge to be saved, tested, interrupted, published, and collaborated on while in progress.") (license license:gpl2+))) (define-public go-github-com-git-lfs-pktline (let ((commit "06e9096e28253ba5c7825cbba43f469e4efd10f0") (revision "0")) (package (name "go-github-com-git-lfs-pktline") (version (git-version "0.0.0" revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/git-lfs/pktline") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "02sn3v8vrl7qjnagbnrbrjnyjvzq8cwkxmc922zyc9b2hg187kpz")))) (build-system go-build-system) (arguments `(#:import-path "github.com/git-lfs/pktline")) (propagated-inputs (list go-github-com-stretchr-testify go-github-com-pmezard-go-difflib go-github-com-davecgh-go-spew)) (home-page "https://github.com/git-lfs/pktline") (synopsis "Git pkt-line Go toolkit") (description "This package is a Go language toolkit for reading and writing files using the Git pkt-line format used in various Git operations.") (license license:expat)))) (define-public go-github-com-git-lfs-wildmatch-v2 (package (name "go-github-com-git-lfs-wildmatch-v2") (version "2.0.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/git-lfs/wildmatch") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0yg6d77d5l6v7cd8vr00y68z9aqb8qs4lidv0hkqh4fvz0ggvpln")))) (build-system go-build-system) (arguments '(#:import-path "github.com/git-lfs/wildmatch/v2")) (home-page "https://github.com/git-lfs/wildmatch") (synopsis "Go implementation of Git's wildmatch") (description "This package is an implementation of Git's wildmatch.c-style pattern matching.") (license license:expat))) (define-public go-github-com-git-lfs-gitobj-v2 (package (name "go-github-com-git-lfs-gitobj-v2") (version "2.1.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/git-lfs/gitobj") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1sd7y4xbx00js1g2az4nq8g5lvsm4d7nqr3v4kxy8fxrfzdm63j9")))) (build-system go-build-system) (arguments '(#:import-path "github.com/git-lfs/gitobj/v2")) (propagated-inputs (list go-github-com-stretchr-testify go-github-com-pmezard-go-difflib go-github-com-davecgh-go-spew)) (home-page "https://github.com/git-lfs/gitobj") (synopsis "Read and write git objects") (description "This package reads and writes loose and packed (objects found in git packfiles) Git objects. It uses the pack package to search pack index files and locate the corresponding delta-base chain in the appropriate pack file. If gitobj can't find a loose object with the appropriate SHA-1, it will search the repository's packfile(s) instead. If it finds an object in a packfile, it will reconstruct the object along its delta-base chain and return it.") (license license:expat))) (define-public git-lfs (package (name "git-lfs") (version "3.3.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/git-lfs/git-lfs") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1g268pplld04b9myhlrwc4fd8r1hvfyya5ja8wr558rar3pgsp5g")))) (build-system go-build-system) (arguments (list #:import-path "github.com/git-lfs/git-lfs" #:install-source? #f #:phases #~(modify-phases %standard-phases (add-after 'unpack 'fix-embed-x-net (lambda _ (delete-file-recursively "src/golang.org/x/net/publicsuffix/data") (copy-recursively #$(file-append (this-package-input "go-golang-org-x-net") "/src/golang.org/x/net/publicsuffix/data") "src/golang.org/x/net/publicsuffix/data"))) (add-before 'build 'man-gen ;; Without this, the binary generated in 'build ;; phase won't have any embedded usage-text. (lambda _ (with-directory-excursion "src/github.com/git-lfs/git-lfs" (invoke "make" "mangen")))) (add-after 'build 'build-man-pages (lambda _ (with-directory-excursion "src/github.com/git-lfs/git-lfs" (invoke "make" "man")))) (add-after 'install 'install-man-pages (lambda* (#:key outputs #:allow-other-keys) (with-directory-excursion "src/github.com/git-lfs/git-lfs/man" (for-each (lambda (manpage) (install-file manpage (string-append #$output "/share/man/man1"))) (find-files "." "^git-lfs.*\\.1$")))))))) ;; make `ronn` available during build for man page generation (native-inputs (list ronn-ng git-minimal ruby-asciidoctor)) (propagated-inputs (list go-github-com-xeipuuv-gojsonschema go-github-com-xeipuuv-gojsonreference go-github-com-xeipuuv-gojsonpointer go-golang-org-x-net go-golang.org-x-sync-semaphore go-github-com-ssgelm-cookiejarparser go-github-com-rubyist-tracerx go-github-com-olekukonko-ts go-github-com-leonelquinteros-gotext go-github-com-git-lfs-wildmatch-v2 go-github-com-git-lfs-pktline go-github-com-git-lfs-go-netrc go-github-com-git-lfs-gitobj-v2 go-github-com-dpotapov-go-spnego go-github-com-avast-retry-go go-github-com-mattn-go-isatty go-github-com-pkg-errors go-github-com-spf13-cobra)) (home-page "https://git-lfs.github.com/") (synopsis "Git extension for versioning large files") (description "Git Large File Storage (LFS) replaces large files such as audio samples, videos, datasets, and graphics with text pointers inside Git, while storing the file contents on a remote server.") (license license:expat))) (define-public lfs-s3 (package (name "lfs-s3") (version "0.1") (source (origin (method git-fetch) (uri (git-reference (url "https://git.sr.ht/~ngraves/lfs-s3") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0nkxivb356f1zjlj34px601zy86w4398db9s2ivd178jp4v69raw")))) (build-system go-build-system) (arguments (list #:import-path "git.sr.ht/~ngraves/lfs-s3")) (inputs (list git-lfs)) (propagated-inputs (list go-github-com-aws-aws-sdk-go-v2 go-github-com-aws-aws-sdk-go-v2-config go-github-com-aws-aws-sdk-go-v2-feature-s3-manager go-github-com-aws-aws-sdk-go-v2-service-s3 go-github-com-spf13-cobra)) (home-page "https://git.sr.ht/~ngraves/lfs-s3/") (synopsis "Git extension for versioning large files in S3") (description "This package provides a custom transfer agent for Git LFS, allowing plain S3 bucket usage as remote storage for media files. This package uses a standalone agent instead of a server.") (license license:expat))) (define-public git-open (package (name "git-open") (version "2.1.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/paulirish/git-open") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11n46bngvca5wbdbfcxzjhjbfdbad7sgf7h9gf956cb1q8swsdm0")))) (build-system copy-build-system) (inputs (list xdg-utils)) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'wrap-program (lambda* (#:key outputs inputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (xdg-utils (assoc-ref inputs "xdg-utils"))) (wrap-program (string-append out "/bin/git-open") `("PATH" ":" prefix (,(string-append xdg-utils "/bin")))))))) #:install-plan '(("git-open" "bin/git-open")))) (home-page "https://github.com/paulirish/git-open") (synopsis "Open a Git repository's homepage from the command-line") (description "@code{git open} opens the repository's website from the command-line, guessing the URL pattern from the @code{origin} remote.") (license license:expat))) (define-public tla (package (name "gnu-arch") (version "1.3.5") (source (origin (method url-fetch) (uri (string-append "https://ftp.gnu.org/old-gnu/gnu-arch/" "tla-" version ".tar.gz")) (sha256 (base32 "01mfzj1i6p4s8191cgd5850hds1zls88hkf9rb6qx1vqjv585aj0")) (modules '((guix build utils))) (snippet '(begin ;; In tar 1.32, '--preserve' is ambiguous and leads to an ;; error, so address that. (substitute* "src/tla/libarch/archive.c" (("\"--preserve\"") "\"--preserve-permissions\"")) #t)))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (chdir "src") (mkdir "=build") (chdir "=build") ;; For libneon's 'configure' script. ;; XXX: There's a bundled copy of neon. (setenv "CONFIG_SHELL" (which "sh")) (invoke "../configure" "--prefix" out "--config-shell" (which "sh") "--with-posix-shell" (which "sh") "--with-cc" "gcc"))))) ;; There are build failures when building in parallel. #:parallel-build? #f #:parallel-tests? #f #:test-target "test")) (native-inputs (list which)) (synopsis "Historical distributed version-control system") (description "GNU Arch, aka. @code{tla}, was one of the first free distributed version-control systems (DVCS). It saw its last release in 2006. This package is provided for users who need to recover @code{tla} repositories and for historians.") (home-page "https://www.gnu.org/software/gnu-arch/") (license license:gpl2))) ;version 2 only (define-public diff-so-fancy (package (name "diff-so-fancy") (version "1.4.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/so-fancy/diff-so-fancy") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11vkq5njjlvjipic7db44ga875n61drszw1qrdzwxmmfmnz425zz")))) (inputs (list perl ncurses)) (build-system copy-build-system) (arguments '(#:phases (modify-phases %standard-phases (add-after 'unpack 'patch-lib-path (lambda* (#:key outputs #:allow-other-keys) (let ((lib (string-append (assoc-ref outputs "out") "/lib"))) (substitute* "diff-so-fancy" (("use lib.*$") (string-append "use lib '" lib "';\n")))))) (add-after 'install 'symlink-executable (lambda* (#:key outputs inputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (ncurses (assoc-ref inputs "ncurses")) (perl (assoc-ref inputs "perl"))) (wrap-program (string-append out "/bin/diff-so-fancy") `("PATH" ":" prefix (,(string-append ncurses "/bin") ,(string-append perl "/bin")))))))) #:install-plan '(("lib" "lib") ("diff-so-fancy" "bin/")))) (home-page "https://github.com/so-fancy/diff-so-fancy") (synopsis "Makes diffs more human friendly and readable") (description "@code{diff-so-fancy} strives to make your diffs human readable instead of machine readable. This helps improve code quality and helps you spot defects faster.") (license license:expat))) (define-public go-github-go-git (package (name "go-github-go-git") (version "5.1.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/go-git/go-git") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1vkcmhh2qq8c38sjbnzf0wvg2rzr19wssaq177bsvrjwj1xz1qbs")))) (build-system go-build-system) (arguments `(#:tests? #f ;requires network connection #:import-path "github.com/go-git/go-git/v5" #:phases (modify-phases %standard-phases (add-before 'build 'setup (lambda* (#:key inputs #:allow-other-keys) (let* ((git (assoc-ref inputs "git")) (git-bin (string-append (assoc-ref inputs "git") "/bin")) (git-exe (string-append git-bin "/git"))) (setenv "GIT_DIST_PATH=" git) (setenv "GIT_EXEC_PATH=" git-bin) (setenv "HOME" (getcwd)) (invoke git-exe "config" "--global" "user.email" "gha@example.com") (invoke git-exe "config" "--global" "user.name" "GitHub Actions") #t) #t))))) (native-inputs `(("go-github-com-emirpasic-gods" ,go-github-com-emirpasic-gods) ("go-github-com-go-git-gcfg" ,go-github-com-go-git-gcfg) ("go-github-com-go-git-go-billy" ,go-github-com-go-git-go-billy) ("go-github-com-imdario-mergo" ,go-github-com-imdario-mergo) ("go-github-com-jbenet-go-context" ,go-github-com-jbenet-go-context) ("go-github-com-kevinburke-ssh-config" ,go-github-com-kevinburke-ssh-config) ("go-github-com-mitchellh-go-homedir" ,go-github-com-mitchellh-go-homedir) ("go-github-com-sergi-go-diff" ,go-github-com-sergi-go-diff) ("go-github-com-xanzy-ssh-agentf" ,go-github-com-xanzy-ssh-agent) ("go-golang-org-x-crypto" ,go-golang-org-x-crypto) ("go-golang-org-x-net" ,go-golang-org-x-net) ("go-gopkg-in-warnings" ,go-gopkg-in-warnings) ("go-github-com-go-git-go-git-fixtures" ,go-github-com-go-git-go-git-fixtures) ("go-gopkg-in-check-v1" ,go-gopkg-in-check-v1) ("go-github-com-alcortesm-tgz" ,go-github-com-alcortesm-tgz) ("go-golang-org-x-text" ,go-golang-org-x-text) ("git" ,git))) (home-page "https://github.com/go-git/") (synopsis "Git implementation library") (description "This package provides a Git implementation library.") (license license:asl2.0))) (define-public gita (let ((commit "e41b504dca90a25e9be27f296da7ce22e5782893") (revision "1")) (package (name "gita") (version (git-version "0.12.9" revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/nosarthur/gita") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "1k03zgcbhl91cgyh4k7ywyjp00y63q4bqbimncqh5b3lni8l8j5l")))) (build-system python-build-system) (native-inputs (list git ;for tests python-pytest)) (propagated-inputs (list python-pyyaml)) (arguments `(#:phases (modify-phases %standard-phases (replace 'check (lambda* (#:key inputs outputs #:allow-other-keys) (substitute* "tests/test_main.py" (("'gita\\\\n'") "'source\\n'") (("'gita'") "'source'")) (invoke (search-input-file inputs "/bin/git") "init") (add-installed-pythonpath inputs outputs) (invoke (search-input-file inputs "/bin/pytest") "-vv" "tests"))) (add-after 'install 'install-shell-completions (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bash-completion (string-append out "/etc/bash_completion.d")) (zsh-completion (string-append out "/etc/zsh/site-functions"))) (mkdir-p bash-completion) (copy-file ".gita-completion.bash" (string-append bash-completion "/gita")) (mkdir-p zsh-completion) (copy-file ".gita-completion.zsh" (string-append zsh-completion "/_gita")))))))) (home-page "https://github.com/nosarthur/gita") (synopsis "Command-line tool to manage multiple Git repos") (description "This package provides a command-line tool to manage multiple Git repos. This tool does two things: @itemize @item display the status of multiple Git repos such as branch, modification, commit message side by side @item (batch) delegate Git commands/aliases from any working directory @end itemize If several repos are related, it helps to see their status together.") (license license:expat)))) (define-public ghq (package (name "ghq") (version "1.1.7") (home-page "https://github.com/x-motemen/ghq") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "155sfmhmh4ia3iinm1s8fk7fxyn5dxdryad9xkbg7mr3i3ikqjwh")))) (build-system go-build-system) (arguments '(#:install-source? #f #:import-path "github.com/x-motemen/ghq" #:phases (modify-phases %standard-phases (add-after 'install 'install-completions (lambda* (#:key outputs import-path #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bash-completion (string-append out "/etc/bash_completion.d")) (zsh-completion (string-append out "/share/zsh/site-functions"))) (with-directory-excursion (string-append "src/" import-path) (mkdir-p bash-completion) (copy-file "misc/bash/_ghq" (string-append bash-completion "/ghq")) (mkdir-p zsh-completion) (copy-file "misc/zsh/_ghq" (string-append zsh-completion "/_ghq")))) #t))))) (native-inputs `(("git" ,git-minimal))) (inputs `(("github.com/songmu/gitconfig" ,go-github-com-songmu-gitconfig) ("github.com/mattn/go-isatty" ,go-github-com-mattn-go-isatty) ("github.com/motemen/go-colorine" ,go-github-com-motemen-go-colorine) ("github.com/saracen/walker" ,go-github-com-saracen-walker) ("github.com/urfave/cli/v2" ,go-github-com-urfave-cli-v2) ("golang.org/x/net/html" ,go-golang-org-x-net-html) ("golang.org/x/sync/errgroup" ,go-golang.org-x-sync-errgroup))) (synopsis "Manage remote repository clones") (description "@code{ghq} provides a way to organize remote repository clones, like @code{go get} does. When you clone a remote repository by @code{ghq get}, ghq makes a directory under a specific root directory (by default @file{~/ghq}) using the remote repository URL's host and path.") (license license:expat))) (define-public tkrev (package (name "tkrev") (version "9.4.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/tkcvs/tkrev_" version ".tar.gz")) (sha256 (base32 "0bpfbhkngzmwy476mfc69mkd94l0m2wxznrn0qzd81s450yxjw2q")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (delete 'build) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (invoke "wish" "doinstall.tcl" "-nox" out) (install-file "contrib/tkdirdiff" bin)))) (add-after 'install 'wrap-programs (lambda* (#:key outputs #:allow-other-keys) (for-each (lambda (file) (wrap-program (string-append (assoc-ref outputs "out") "/bin/" file) `("PATH" ":" prefix (,(dirname (which "wish")))))) '("tkdiff" "tkdirdiff" "tkrev"))))) #:tests? #f)) (inputs (list tk)) (home-page "https://tkcvs.sourceforge.io") (synopsis "Graphical interface to CVS, Subversion, Git, and RCS") (description "TkRev (formerly TkCVS) is a Tcl/Tk-based graphical interface to the CVS, Subversion and Git configuration management systems. It will also help with RCS. It shows the status of the files in the current working directory, and has tools for tagging, merging, checking in/out, and other user operations. TkDiff is included for browsing and merging your changes.") (license license:gpl2+))) (define-public git-filter-repo (package (name "git-filter-repo") (version "2.29.0") (source (origin ;; Use a release tarball instead of 'git-fetch' because it contains ;; pre-compiled man-pages which are too hard to build in this context ;; as it depends on Git's Makefile. (method url-fetch) (uri (string-append "https://github.com/newren/git-filter-repo/releases/" "download/v" version "/git-filter-repo-" version ".tar.xz")) (sha256 (base32 "00nn7k9jqrybb762486fmigsnbcn9lbvimgpfvvarz4ikdp9y9pb")))) (build-system copy-build-system) (arguments `(#:install-plan '(("git-filter-repo" "libexec/git-core/") ("Documentation/man1/" "share/man/man1") ("/" "" #:include ())))) (inputs (list python)) ;for the shebang (home-page "https://github.com/newren/git-filter-repo") (synopsis "Quickly rewrite Git repository history") (description "@command{git filter-repo} is a versatile tool for rewriting history, which roughly falls into the same space of tool like git filter-branch but with more capabilities. @command{git filter-repo} is now recommended by the Git project instead of @command{git filter-branch}.") (license (list license:expat ;; Main license. license:gpl2)))) ;; For test harness. (define-public gitlint (package (name "gitlint") (version "0.17.0") (source (origin (method url-fetch) ;; the gitlint-core pypi package contains the actual gitlint ;; code; the gitlint package only pulls in gitlint-core with ;; stricter dependency versioning (uri (pypi-uri "gitlint-core" version)) (sha256 (base32 "14cn89biys8r7mwcdgllv371k34km9k1941ylxf53a7sxwrzsbbp")))) (build-system python-build-system) (arguments (list #:phases #~(modify-phases %standard-phases (add-before 'build 'loosen-requirements (lambda* (#:key inputs #:allow-other-keys) (substitute* "gitlint/shell.py" (("'git'") (string-append "'" (search-input-file inputs "bin/git") "'")) ;; force using subprocess instead of sh so git does not need ;; to be a propagated input (("if USE_SH_LIB") "if False"))))))) (inputs (list git python-arrow python-click python-sh)) (home-page "https://jorisroovers.com/gitlint/") (synopsis "Linting Git commit messages") (description "Gitlint is a Git commit message linter written in Python: it checks your commit messages for style.") (license license:expat))) (define-public hut (package (name "hut") (version "0.2.0") (source (origin (method git-fetch) (uri (git-reference (url "https://git.sr.ht/~emersion/hut") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0ybngrwwmkm00dlkdhvkfcvcjhp5xzs8fh90zqr0h12ssqx9pll3")))) (build-system go-build-system) (arguments (list #:import-path "git.sr.ht/~emersion/hut" #:phases #~(modify-phases %standard-phases (replace 'build (lambda* (#:key import-path #:allow-other-keys) (with-directory-excursion (string-append "src/" import-path) ;; The flags are copied from (guix build go-build-system). (setenv "CGO_LDFLAGS" "-s -w") (invoke "make" "all" "GOFLAGS=-v -x")))) (replace 'install (lambda* (#:key import-path #:allow-other-keys) (with-directory-excursion (string-append "src/" import-path) (invoke "make" "install" (string-append "PREFIX=" #$output)))))))) (native-inputs (list scdoc)) (inputs (list go-git-sr-ht-emersion-go-scfg go-git-sr-ht-emersion-gqlclient go-github-com-juju-ansiterm go-github-com-spf13-cobra go-golang-org-x-oauth2 go-golang-org-x-term)) (home-page "https://git.sr.ht/~emersion/hut") (synopsis "CLI tool for sr.ht") (description "@command{hut} is a CLI tool for @uref{https://sr.ht/~sircmpwn/sourcehut/, sr.ht}. It helps you interact with sr.ht's public services: @table @asis @item builds submit and manage build jobs @item git create, and manage git repositories and artifacts @item hg list Mercurial repositories @item lists manage mailing lists and patches @item meta manage PGP, and SSH keys @item pages publish and manage hosted websites @item paste create and manage pastes @item todo create and manage trackers, tickets @item graphql interact with GraphQL APIs directly @end table") (license license:agpl3)))