* Easy DigitalOcean setup?
@ 2020-11-09 22:28 raingloom
2020-11-09 22:40 ` Joshua Branson
2020-11-10 7:22 ` Easy DigitalOcean setup? Reza Alizadeh Majd
0 siblings, 2 replies; 7+ messages in thread
From: raingloom @ 2020-11-09 22:28 UTC (permalink / raw)
To: help-guix@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1115 bytes --]
I've been stuck on trying to "infect" an Ubuntu VPS with Guix for a
while. It keeps failing on the bootloader setup step and it does so in
a way that somehow nukes the `guix` command, but the store remains.
At press time, my config was the one attached.
As I'm a caveperson who never owned a single UEFI machine, I'm a bit
stumped as to what the absolute heck the nature of the error might be:
```
# guix system init /etc/config.scm /
...bunch of build stuff, and then:
guix system: error:
'/gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/sbin/grub-install
--boot-directory //boot --bootloader-id=Guix --efi-directory
//boot/efi' exited with status 1; output follows:
/gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/sbin/grub-install:
error:
/gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/lib/grub/i386-pc/modinfo.sh
doesn't exist. Please specify --target or --directory.
```
I found two existing guides, but one requires adding an extra block
device and other shenanigans, and the other mentions some alarmingly
outdated version numbers, so I don't trust either of them.
[-- Attachment #2: blue.scm --]
[-- Type: text/x-scheme, Size: 2561 bytes --]
(use-modules (gnu) (gnu system nss))
(use-service-modules
admin
networking
ssh)
(use-package-modules
bootloaders
certs
gnome
networking
ssh)
(operating-system
(host-name "blue")
(timezone "Europe/Budapest")
(locale "en_US.utf8")
(keyboard-layout (keyboard-layout "us"))
;; Use the UEFI variant of GRUB with the EFI System
;; Partition mounted on /boot/efi.
(bootloader (bootloader-configuration
(bootloader grub-efi-bootloader)
(target "/boot/efi")
(keyboard-layout keyboard-layout)))
(file-systems (append
(list (file-system
(device (file-system-label "cloudimg-rootfs"))
(mount-point "/")
(type "ext4"))
(file-system
(device
(file-system-label "UEFI"))
(mount-point "/boot/efi")
(type "vfat")))
%base-file-systems))
;; Create user `bob' with `alice' as its initial password.
(users (cons (user-account
(name "user")
(password (crypt "alice" "$6$abc"))
(group "users")
(supplementary-groups '("wheel" "netdev")))
%base-user-accounts))
;; This is where we specify system-wide packages.
(packages (append (list
;; for HTTPS access
nss-certs
;; for user mounts
gvfs)
%base-packages))
(services (append (list
(service unattended-upgrade-service-type)
(static-networking-service
"eth0" "206.189.49.189"
#:netmask "255.255.240.000"
#:gateway "000.000.000.000"
#:name-servers '("84.200.69.80" "84.200.70.40"))
;(service dhcp-client-service-type)
(service openssh-service-type
(openssh-configuration
(openssh openssh-sans-x)))
(service
yggdrasil-service-type
(yggdrasil-configuration
(log-to 'stdout)
(log-level 'debug)
(autoconf? #f)
(config-file "/etc/yggdrasil-secret.conf")
(json-config
'((peers . #(;; Baden-Baden, IONOS, operated by
;; [jcgruenhage](https://jcg.re/)
"tcp://82.165.69.111:61216"
"tcp://[2001:8d8:1800:8224::1]:61216"
;; Praha, ITLDC, operated by
;; [Revertron](https://github.com/Revertron)
"tcp://195.123.245.146:7743"
"tcp://[2a05:9403::8b]:7743"
;; Praha, vpsFree, operated by @ehmry
"tcp://37.205.14.171:46370"
"tcp://[2a03:3b40:fe:ab::1]:46370")))))))
%base-services))
;; Allow resolution of '.local' host names with mDNS.
(name-service-switch %mdns-host-lookup-nss))
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Easy DigitalOcean setup?
2020-11-09 22:28 Easy DigitalOcean setup? raingloom
@ 2020-11-09 22:40 ` Joshua Branson
2020-11-09 23:02 ` Jérémy Korwin-Zmijowski
2020-11-10 7:22 ` Easy DigitalOcean setup? Reza Alizadeh Majd
1 sibling, 1 reply; 7+ messages in thread
From: Joshua Branson @ 2020-11-09 22:40 UTC (permalink / raw)
To: raingloom; +Cc: help-guix@gnu.org
You might try using a linode VPS. That's what I'm using. There is a
guide in the cookbook that shows you how to set it up. :)
--
Joshua Branson
Sent from Emacs and Gnus
https://gnucode.me
https://video.hardlimit.com/accounts/joshua_branson/video-channels
"You can have whatever you want, as long as you help enough other people get what they want." - Zig Ziglar
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Easy DigitalOcean setup?
2020-11-09 22:40 ` Joshua Branson
@ 2020-11-09 23:02 ` Jérémy Korwin-Zmijowski
2020-11-10 18:39 ` David Dashyan
0 siblings, 1 reply; 7+ messages in thread
From: Jérémy Korwin-Zmijowski @ 2020-11-09 23:02 UTC (permalink / raw)
To: Joshua Branson, raingloom; +Cc: help-guix@gnu.org
[-- Attachment #1: Type: text/plain, Size: 735 bytes --]
Le lundi 09 novembre 2020 à 17:40 -0500, Joshua Branson a écrit :
> You might try using a linode VPS. That's what I'm using. There is a
> guide in the cookbook that shows you how to set it up. :)
>
Hey Raingloom !
I just played with Guix and DigitalOcean last couple of days.
If it's what you are looking for :
On my personal Ubuntu laptop, where I use Guix as a package manager, I
generated a compressed guix system image with :
$ guix system disk-image -t qcow2 do-conf.scm --image-size=5G
Then I uploaded the resulting image (i.e.
/gnu/store/f34vzy15zzk739l6gimkj5l4sn3brski-image.qcow2) as a custom
image on DigitalOcean.
Finally I create a droplet with this custom image and voilà !
Easy peasy.
Hope it will help!
[-- Attachment #2: do-conf.scm --]
[-- Type: text/x-scheme, Size: 875 bytes --]
(use-modules (gnu))
(use-service-modules ssh networking)
(use-package-modules screen ssh certs version-control)
(operating-system
(host-name "doguix")
(timezone "Europe/Paris")
(locale "fr_FR.utf8")
(packages (cons* screen git nss-certs %base-packages))
(bootloader (bootloader-configuration
(bootloader grub-bootloader)
(target "/dev/vda")))
(file-systems (cons (file-system
(mount-point "/")
(device "/dev/vda1")
(type "ext4"))
%base-file-systems))
(services
(append
(list
(service dhcp-client-service-type)
(service openssh-service-type
(openssh-configuration
(openssh openssh-sans-x)
(permit-root-login 'without-password)
(authorized-keys
`(("root" ,(local-file "/home/jeko/.ssh/id_ed25519.pub"))))
(port-number 2222))))
%base-services)))
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Easy DigitalOcean setup?
2020-11-09 22:28 Easy DigitalOcean setup? raingloom
2020-11-09 22:40 ` Joshua Branson
@ 2020-11-10 7:22 ` Reza Alizadeh Majd
1 sibling, 0 replies; 7+ messages in thread
From: Reza Alizadeh Majd @ 2020-11-10 7:22 UTC (permalink / raw)
To: raingloom; +Cc: help-guix@gnu.org
On Mon, 9 Nov 2020 23:28:02 +0100
raingloom <raingloom@riseup.net> wrote:
> I've been stuck on trying to "infect" an Ubuntu VPS with Guix for a
> while. It keeps failing on the bootloader setup step and it does so in
> a way that somehow nukes the `guix` command, but the store remains.
>
> At press time, my config was the one attached.
>
> As I'm a caveperson who never owned a single UEFI machine, I'm a bit
> stumped as to what the absolute heck the nature of the error might be:
> ```
> # guix system init /etc/config.scm /
> ...bunch of build stuff, and then:
> guix system: error:
> '/gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/sbin/grub-install
> --boot-directory //boot --bootloader-id=Guix --efi-directory
> //boot/efi' exited with status 1; output follows:
>
> /gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/sbin/grub-install:
> error:
> /gnu/store/0az53wrhxvhpkm80pmfyzw607y0qas9n-grub-efi-2.04/lib/grub/i386-pc/modinfo.sh
> doesn't exist. Please specify --target or --directory.
> ```
>
> I found two existing guides, but one requires adding an extra block
> device and other shenanigans, and the other mentions some alarmingly
> outdated version numbers, so I don't trust either of them.
Hi,
Having a similar experience about transforming a Debian droplet to Guix
on digitalocean, we provided a document for that. maybe that would also
helps you
https://wiki.pantherx.org/Installation-digital-ocean/
Regards
Reza
--
Reza Alizadeh Majd
PantherX Team
https://www.pantherx.org/
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-11-11 12:34 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-09 22:28 Easy DigitalOcean setup? raingloom
2020-11-09 22:40 ` Joshua Branson
2020-11-09 23:02 ` Jérémy Korwin-Zmijowski
2020-11-10 18:39 ` David Dashyan
2020-11-10 18:47 ` Confusing typo (was: Easy DigitalOcean setup?) David Dashyan
2020-11-11 12:33 ` Efraim Flashner
2020-11-10 7:22 ` Easy DigitalOcean setup? Reza Alizadeh Majd
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.