bug#22826: gnupg test failure

bug#22826: gnupg test failure

[Danny Milosavljevic]

gnupg fails its tests:

...
note: keeping build directory `/tmp/guix-build-gnupg-2.1.11.drv-0'
builder for `/gnu/store/p91ba6zl4d8gr5ixfqxn8ixhrv13kdv9-gnupg-2.1.11.drv' failed with exit code 1
cannot build derivation `/gnu/store/ixcbdqm2xvclfnz4d25nv53wnp6x7alh-profile.drv': 1 dependencies couldn't be built
cannot build derivation `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv': 1 dependencies couldn't be built
note: keeping build directory `/tmp/guix-build-linux-libre-4.4.3-gnu.tar.xz.drv-0'
guix system: error: build failed: build of `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv' failed

More details:

FAIL: gpgtar.test
Test: gpgtar.test
GNUPGHOME=/tmp/guix-build-gnupg-2.1.11.drv-0/gnupg-2.1.11/tests/openpgp
gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
gpgtar: gpg2: gpg: block_filter 0x00000000006edd10: read error (size=12276,a->size=12276)
gpgtar: gpg2: gpg: block_filter 0x00000000006ee2e0: read error (size=13882,a->size=13882)
gpgtar: gpg2: gpg: WARNING: encrypted message has been manipulated!
gpgtar: gpg2: gpg: block_filter: pending bytes!
gpgtar: gpg2: gpg: block_filter: pending bytes!
gpgtar: error running '../../g10/gpg2': exit status 2

bug#22826: gnupg test failure

[Mark H Weaver]

Danny Milosavljevic <dannym@scratchpost.org> writes:

> gnupg fails its tests:
>
> ...
> note: keeping build directory `/tmp/guix-build-gnupg-2.1.11.drv-0'
> builder for `/gnu/store/p91ba6zl4d8gr5ixfqxn8ixhrv13kdv9-gnupg-2.1.11.drv' failed with exit code 1
> cannot build derivation `/gnu/store/ixcbdqm2xvclfnz4d25nv53wnp6x7alh-profile.drv': 1 dependencies couldn't be built
> cannot build derivation `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv': 1 dependencies couldn't be built
> note: keeping build directory `/tmp/guix-build-linux-libre-4.4.3-gnu.tar.xz.drv-0'
> guix system: error: build failed: build of `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv' failed
>
> More details:
>
> FAIL: gpgtar.test
> Test: gpgtar.test
> GNUPGHOME=/tmp/guix-build-gnupg-2.1.11.drv-0/gnupg-2.1.11/tests/openpgp
> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
> gpgtar: gpg2: gpg: block_filter 0x00000000006edd10: read error (size=12276,a->size=12276)
> gpgtar: gpg2: gpg: block_filter 0x00000000006ee2e0: read error (size=13882,a->size=13882)
> gpgtar: gpg2: gpg: WARNING: encrypted message has been manipulated!
> gpgtar: gpg2: gpg: block_filter: pending bytes!
> gpgtar: gpg2: gpg: block_filter: pending bytes!
> gpgtar: error running '../../g10/gpg2': exit status 2

We often see this error occur on Hydra as well.  Retrying the build
eventually works, but it would be good to fix this.

      Mark

bug#22826: gnupg test failure

[Ludovic Courtès]

Mark H Weaver <mhw@netris.org> skribis:

> Danny Milosavljevic <dannym@scratchpost.org> writes:
>
>> gnupg fails its tests:
>>
>> ...
>> note: keeping build directory `/tmp/guix-build-gnupg-2.1.11.drv-0'
>> builder for `/gnu/store/p91ba6zl4d8gr5ixfqxn8ixhrv13kdv9-gnupg-2.1.11.drv' failed with exit code 1
>> cannot build derivation `/gnu/store/ixcbdqm2xvclfnz4d25nv53wnp6x7alh-profile.drv': 1 dependencies couldn't be built
>> cannot build derivation `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv': 1 dependencies couldn't be built
>> note: keeping build directory `/tmp/guix-build-linux-libre-4.4.3-gnu.tar.xz.drv-0'
>> guix system: error: build failed: build of `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv' failed
>>
>> More details:
>>
>> FAIL: gpgtar.test
>> Test: gpgtar.test
>> GNUPGHOME=/tmp/guix-build-gnupg-2.1.11.drv-0/gnupg-2.1.11/tests/openpgp
>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>> gpgtar: gpg2: gpg: block_filter 0x00000000006edd10: read error (size=12276,a->size=12276)
>> gpgtar: gpg2: gpg: block_filter 0x00000000006ee2e0: read error (size=13882,a->size=13882)
>> gpgtar: gpg2: gpg: WARNING: encrypted message has been manipulated!
>> gpgtar: gpg2: gpg: block_filter: pending bytes!
>> gpgtar: gpg2: gpg: block_filter: pending bytes!
>> gpgtar: error running '../../g10/gpg2': exit status 2
>
> We often see this error occur on Hydra as well.  Retrying the build
> eventually works, but it would be good to fix this.

Isn’t it the same issue as
<http://debbugs.gnu.org/cgi/bugreport.cgi?bug=22558>?  But that bug was
closed.

Ludo’.

bug#22826: gnupg test failure

[Mark H Weaver]

ludo@gnu.org (Ludovic Courtès) writes:

> Mark H Weaver <mhw@netris.org> skribis:
>
>> Danny Milosavljevic <dannym@scratchpost.org> writes:
>>
>>> gnupg fails its tests:
>>>
>>> ...
>>> note: keeping build directory `/tmp/guix-build-gnupg-2.1.11.drv-0'
>>> builder for `/gnu/store/p91ba6zl4d8gr5ixfqxn8ixhrv13kdv9-gnupg-2.1.11.drv' failed with exit code 1
>>> cannot build derivation `/gnu/store/ixcbdqm2xvclfnz4d25nv53wnp6x7alh-profile.drv': 1 dependencies couldn't be built
>>> cannot build derivation `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv': 1 dependencies couldn't be built
>>> note: keeping build directory `/tmp/guix-build-linux-libre-4.4.3-gnu.tar.xz.drv-0'
>>> guix system: error: build failed: build of `/gnu/store/904rahmy35wrhsfdb26pcfxyirhbmlnk-system.drv' failed
>>>
>>> More details:
>>>
>>> FAIL: gpgtar.test
>>> Test: gpgtar.test
>>> GNUPGHOME=/tmp/guix-build-gnupg-2.1.11.drv-0/gnupg-2.1.11/tests/openpgp
>>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>>> gpgtar: gpg2: gpg: encrypted with 1024-bit ELG key, ID B27907AA, created 2003-12-31
>>> gpgtar: gpg2:       "Test two (no pp) <two@example.com>"
>>> gpgtar: gpg2: gpg: block_filter 0x00000000006edd10: read error (size=12276,a->size=12276)
>>> gpgtar: gpg2: gpg: block_filter 0x00000000006ee2e0: read error (size=13882,a->size=13882)
>>> gpgtar: gpg2: gpg: WARNING: encrypted message has been manipulated!
>>> gpgtar: gpg2: gpg: block_filter: pending bytes!
>>> gpgtar: gpg2: gpg: block_filter: pending bytes!
>>> gpgtar: error running '../../g10/gpg2': exit status 2
>>
>> We often see this error occur on Hydra as well.  Retrying the build
>> eventually works, but it would be good to fix this.
>
> Isn’t it the same issue as
> <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=22558>?  But that bug was
> closed.

It's true that the first message of bug 22558 mentioned two different
failure modes of gnupg-2.1.11's test suite.  However, the subsequent
discussion focused on just one of those failure modes: the one that led
to 14 test failures.  I closed the bug when that failure mode was
addressed.

In retrospect, since these two failure modes have different causes and
different fixes, perhaps I should have filed two separate bug reports
from the beginning.  If we can agree on this, then perhaps we can
consider 22558 to address only the 14-test failure mode, and this bug
(22826) can address the gpgtar.test failure mode.

What do you think?

      Mark

bug#22826: gnupg test failure

[Ludovic Courtès]

Mark H Weaver <mhw@netris.org> skribis:

> ludo@gnu.org (Ludovic Courtès) writes:

[...]

>> Isn’t it the same issue as
>> <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=22558>?  But that bug was
>> closed.
>
> It's true that the first message of bug 22558 mentioned two different
> failure modes of gnupg-2.1.11's test suite.  However, the subsequent
> discussion focused on just one of those failure modes: the one that led
> to 14 test failures.  I closed the bug when that failure mode was
> addressed.

Oh, I see.

> In retrospect, since these two failure modes have different causes and
> different fixes, perhaps I should have filed two separate bug reports
> from the beginning.  If we can agree on this, then perhaps we can
> consider 22558 to address only the 14-test failure mode, and this bug
> (22826) can address the gpgtar.test failure mode.
>
> What do you think?

Makes sense, let’s keep it this way.  We should probably retitle this
bug accordingly.

Thanks for the explanation,
Ludo’.

bug#22826: gnupg test failure

[Andreas Enge]

The current release of gnupg after 2.1.11 is 2.2.4, which is available
on hydra. Can we close this bug?

Andreas

bug#22826: gnupg test failure

[Leo Famulari]

[-- Attachment #1: Type: text/plain, Size: 306 bytes --]

On Mon, Feb 05, 2018 at 11:14:55PM +0100, Andreas Enge wrote:
> The current release of gnupg after 2.1.11 is 2.2.4, which is available
> on hydra. Can we close this bug?

The GnuPG test suite has seen lots of changes since this bug was filed,
and it seems to pass consistently now, so I'm closing the bug.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]