need to do this:
sudo sh -c "echo 'options ath5k nohwcrypt' >/etc/modprobe.d/custom-wireless.conf"
So I tried this:
$ lsmod | grep ath
ath9k 155648 0
ath9k_common 24576 1 ath9k
ath9k_hw 479232 2 ath9k_common,ath9k
ath 32768 3 ath9k_common,ath9k,ath9k_hw
mac80211 839680 1 ath9k
cfg80211 692224 4 ath9k_common,ath9k,ath,mac80211
ath3k 24576 0
bluetooth 561152 7 btrtl,btqca,btintel,hci_uart,btbcm,ath3k,btusb
$ modinfo ath9k
filename: /run/booted-system/kernel/lib/modules/5.0.5-gnu/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko
license: Dual BSD/GPL
description: Support for Atheros 802.11n wireless LAN cards.
...
depends: mac80211,ath9k_hw,ath9k_common,cfg80211,ath
retpoline: Y
intree: Y
name: ath9k
vermagic: 5.0.5-gnu SMP mod_unload modversions
parm: debug:Debugging mask (uint)
parm: nohwcrypt:Disable hardware encryption (int)
parm: blink:Enable LED blink on activity (int)
parm: led_active_high:Invert LED polarity (int)
parm: btcoex_enable:Enable wifi-BT coexistence (int)
parm: bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int)
parm: ps_enable:Enable WLAN PowerSave (int)
parm: use_chanctx:Enable channel context for concurrency (int)
parm: use_msi:Use MSI instead of INTx if possible (int)
# tail -n8 /etc/config.scm
(kernel-arguments '("modprobe.blacklist=pcspkr,snd_pcsp,wmi,bluetooth,pata_acpi"
"modprobe.options.ath9k=nohwcrypt"))
);;end of operating-system
# guix system reconfigure
# reboot
Also I have this in /var/log/messages :
Apr 5 16:56:40 localhost wpa_supplicant: Libgcrypt warning: missing initialization - please fix the application
I do not know what to do?
Apr 5, 2019, 1:52 PM by znavko@tutanota.com:
Hello! I am creating my own config. I've disabled networkmanager-service-type, configured wpa-supplicant (but have not yet configured dhcpcd, cause it needs networking service).
Guix reconfigures my system normally.
But during boot there is a message: rfkill: WLAN soft blocked
And that is why wpa-supplicant fails:
# reboot
# dhclient -v wlp2s0
Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
RTNETLINK answers: Operation not possible due to RF-kill
Listening on LPF/wlp2s0/xx:xx:xx:xx:55
Sending on LPF/wlp2s0/xx:xx:xx:xx:55
Sending on Socket/fallback
DHCPREQUEST for 192.168.1.33 on wlp2s0 to 255.255.255.255 port 67
send_packet: Network is down
dhclient.c:2762: Failed to send 300 byte long packet over wlp2s0 interface.
receive_packet failed on wlp2s0: Network is down
^C
# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:0.0.0.0 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:0
# rfkill list all
0: ideapad_wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
# rfkill unblock wifi
# herd restart wpa-supplicant
# dhclient -v wlp2s0
So I need manually unblock wifi and restart wpa-supplicant, but it's not coveinent.
(kernel-arguments '("modprobe.blacklist=pcspkr,snd_pcsp,wmi,pata_acpi"
"modprobe.options.rfkill.master_switch_mode=2"
"modprobe.options.rfkill.default_state=1"))
But adding 'wmi,pata_acpi ' but not helped. If add ideapad_laptop to blacklist, then rfkill does not see interfaces wlan and bluetooth.
# lsmod | grep -e wmi -e acpi
wmi 32768 1 ideapad_laptop
How to prevent rfkill blocking of wlan?