* no code for module (ice-9 readline) running guile @ 2019-01-10 16:30 John Soo 2019-01-10 18:56 ` Gábor Boskovits 0 siblings, 1 reply; 6+ messages in thread From: John Soo @ 2019-01-10 16:30 UTC (permalink / raw) To: help-guix [-- Attachment #1: Type: text/plain, Size: 234 bytes --] Hello all, I have an issue running guile from command line, namely "no code for module (ice-9 readline). I'm pretty sure the load path is correct in my profile and I haven't touched ~/.guile. Any clues on what to do? Thanks, John [-- Attachment #2: Type: text/html, Size: 357 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: no code for module (ice-9 readline) running guile 2019-01-10 16:30 no code for module (ice-9 readline) running guile John Soo @ 2019-01-10 18:56 ` Gábor Boskovits 2019-01-10 19:23 ` david.larsson 2019-01-10 19:28 ` John Soo 0 siblings, 2 replies; 6+ messages in thread From: Gábor Boskovits @ 2019-01-10 18:56 UTC (permalink / raw) To: John Soo; +Cc: help-guix Hello, could you could try installing the guile-readline package, or create an evironment with it, like guix environment --ad-hoc guile-readline John Soo <jsoo1@asu.edu> ezt írta (időpont: 2019. jan. 10., Cs, 17:30): > > Hello all, > > I have an issue running guile from command line, namely "no code for module (ice-9 readline). I'm pretty sure the load path is correct in my profile and I haven't touched ~/.guile. Any clues on what to do? > > Thanks, > > John Best regards, g_bor ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: no code for module (ice-9 readline) running guile 2019-01-10 18:56 ` Gábor Boskovits @ 2019-01-10 19:23 ` david.larsson 2019-01-10 19:33 ` david.larsson 2019-01-10 19:28 ` John Soo 1 sibling, 1 reply; 6+ messages in thread From: david.larsson @ 2019-01-10 19:23 UTC (permalink / raw) To: Gábor Boskovits; +Cc: help-guix [-- Attachment #1: Type: text/plain, Size: 1495 bytes --] On Thu, 10 Jan 2019, Gábor Boskovits wrote: > Hello, > > could you could try installing the guile-readline package, or create > an evironment with it, like guix environment --ad-hoc guile-readline > > John Soo <jsoo1@asu.edu> ezt írta (időpont: 2019. jan. 10., Cs, 17:30): >> >> Hello all, >> >> I have an issue running guile from command line, namely "no code for module (ice-9 readline). I'm pretty sure the load path is correct in my profile and I haven't touched ~/.guile. Any clues on what to do? >> >> Thanks, >> >> John > > Best regards, > g_bor > Hi, I don't have a good fix, but a couple suggestions for a workaround. 1. To verify paths you can check 'echo $GUILE_LOAD_PATH' and 'echo $GUILE_LOAD_COMPILED_PATH' from cli, and from guile REPL you can check for example (display %load-path). If necessary you can add a statement in bash like: export GUILE_LOAD_PATH="/root/.guix-profile/include${GUILE_LOAD_PATH:+:}$GUILE_LOAD_PATH and rerun your script. 2. Secondly, you can look up the guile install directory, to check for the folder where you can find the ice-9 directory. If the ice-9 dir is located in ~/.guix-profile/share/guile/site/2.0 and there's a readline file inside, you can start guile with guile -L ~/.guix-profile/share/guile/site/2.0 myscript.scm. Im also having issues with guile when running guix as a stand-alone package manager while it works fine with GuixSD but that's possibly unrelated. Regards, David L ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: no code for module (ice-9 readline) running guile 2019-01-10 19:23 ` david.larsson @ 2019-01-10 19:33 ` david.larsson 2019-01-11 4:56 ` John Soo 0 siblings, 1 reply; 6+ messages in thread From: david.larsson @ 2019-01-10 19:33 UTC (permalink / raw) To: david.larsson; +Cc: help-guix [-- Attachment #1: Type: text/plain, Size: 1838 bytes --] On Thu, 10 Jan 2019, david.larsson@selfhosted.xyz wrote: > On Thu, 10 Jan 2019, Gábor Boskovits wrote: > >> Hello, >> >> could you could try installing the guile-readline package, or create >> an evironment with it, like guix environment --ad-hoc guile-readline >> >> John Soo <jsoo1@asu.edu> ezt írta (időpont: 2019. jan. 10., Cs, 17:30): >>> >>> Hello all, >>> >>> I have an issue running guile from command line, namely "no code for >>> module (ice-9 readline). I'm pretty sure the load path is correct in my >>> profile and I haven't touched ~/.guile. Any clues on what to do? >>> >>> Thanks, >>> >>> John >> >> Best regards, >> g_bor >> > > Hi, > I don't have a good fix, but a couple suggestions for a workaround. > > 1. To verify paths you can check 'echo $GUILE_LOAD_PATH' and 'echo > $GUILE_LOAD_COMPILED_PATH' from cli, and from guile REPL you can check > for example (display %load-path). If necessary you can add a statement > in bash like: > > export > GUILE_LOAD_PATH="/root/.guix-profile/include${GUILE_LOAD_PATH:+:}$GUILE_LOAD_PATH sorry, that line should have been: export GUILE_LOAD_PATH="~/.guix-profile/share/guile/site/2.0${GUILE_LOAD_PATH:+:}$GUILE_LOAD_PATH" or whatever your correct path is to the ice-9 dir. > > and rerun your script. > > 2. Secondly, you can look up the guile install directory, to check for > the folder where you can find the ice-9 directory. If the ice-9 dir is > located in ~/.guix-profile/share/guile/site/2.0 and there's a readline > file inside, you can start guile with guile -L > ~/.guix-profile/share/guile/site/2.0 myscript.scm. > > Im also having issues with guile when running guix as a stand-alone > package manager while it works fine with GuixSD but that's possibly > unrelated. > > Regards, > David L ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: no code for module (ice-9 readline) running guile 2019-01-10 19:33 ` david.larsson @ 2019-01-11 4:56 ` John Soo 0 siblings, 0 replies; 6+ messages in thread From: John Soo @ 2019-01-11 4:56 UTC (permalink / raw) To: david.larsson; +Cc: help-guix That did it. Thanks! It looks like it was no longer in the system profile and ~/.guile was a stale generated version. Is there a chance that happened to others? > On Jan 10, 2019, at 11:33 AM, david.larsson@selfhosted.xyz wrote: > >> On Thu, 10 Jan 2019, david.larsson@selfhosted.xyz wrote: >> >>> On Thu, 10 Jan 2019, Gábor Boskovits wrote: >>> >>> Hello, >>> could you could try installing the guile-readline package, or create >>> an evironment with it, like guix environment --ad-hoc guile-readline >>> John Soo <jsoo1@asu.edu> ezt írta (időpont: 2019. jan. 10., Cs, 17:30): >>>> Hello all, >>>> I have an issue running guile from command line, namely "no code for module (ice-9 readline). I'm pretty sure the load path is correct in my profile and I haven't touched ~/.guile. Any clues on what to do? >>>> Thanks, >>>> John >>> Best regards, >>> g_bor >> >> Hi, >> I don't have a good fix, but a couple suggestions for a workaround. >> >> 1. To verify paths you can check 'echo $GUILE_LOAD_PATH' and 'echo >> $GUILE_LOAD_COMPILED_PATH' from cli, and from guile REPL you can check >> for example (display %load-path). If necessary you can add a statement >> in bash like: >> >> export GUILE_LOAD_PATH="/root/.guix-profile/include${GUILE_LOAD_PATH:+:}$GUILE_LOAD_PATH > sorry, that line should have been: > > export GUILE_LOAD_PATH="~/.guix-profile/share/guile/site/2.0${GUILE_LOAD_PATH:+:}$GUILE_LOAD_PATH" > > or whatever your correct path is to the ice-9 dir. > >> >> and rerun your script. >> >> 2. Secondly, you can look up the guile install directory, to check for >> the folder where you can find the ice-9 directory. If the ice-9 dir is >> located in ~/.guix-profile/share/guile/site/2.0 and there's a readline >> file inside, you can start guile with guile -L >> ~/.guix-profile/share/guile/site/2.0 myscript.scm. >> >> Im also having issues with guile when running guix as a stand-alone >> package manager while it works fine with GuixSD but that's possibly >> unrelated. >> >> Regards, >> David L ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: no code for module (ice-9 readline) running guile 2019-01-10 18:56 ` Gábor Boskovits 2019-01-10 19:23 ` david.larsson @ 2019-01-10 19:28 ` John Soo 1 sibling, 0 replies; 6+ messages in thread From: John Soo @ 2019-01-10 19:28 UTC (permalink / raw) To: Gábor Boskovits; +Cc: help-guix Hi and thanks, That’s gotta be it. I’ll try it tonight. Was that originally in a system profile and got removed? - John > On Jan 10, 2019, at 10:56 AM, Gábor Boskovits <boskovits@gmail.com> wrote: > > Hello, > > could you could try installing the guile-readline package, or create > an evironment with it, like guix environment --ad-hoc guile-readline > > John Soo <jsoo1@asu.edu> ezt írta (időpont: 2019. jan. 10., Cs, 17:30): >> >> Hello all, >> >> I have an issue running guile from command line, namely "no code for module (ice-9 readline). I'm pretty sure the load path is correct in my profile and I haven't touched ~/.guile. Any clues on what to do? >> >> Thanks, >> >> John > > Best regards, > g_bor ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-01-11 4:56 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-01-10 16:30 no code for module (ice-9 readline) running guile John Soo 2019-01-10 18:56 ` Gábor Boskovits 2019-01-10 19:23 ` david.larsson 2019-01-10 19:33 ` david.larsson 2019-01-11 4:56 ` John Soo 2019-01-10 19:28 ` John Soo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).