* Re: Re Recent hydra.gnu.org maintenance window
2018-10-29 19:07 ` Nalin Ranjan
@ 2018-10-29 20:25 ` Gábor Boskovits
2018-10-29 20:38 ` Björn Höfling
2018-10-29 20:45 ` Clément Lassieur
2 siblings, 0 replies; 6+ messages in thread
From: Gábor Boskovits @ 2018-10-29 20:25 UTC (permalink / raw)
To: ranjanified; +Cc: help-guix, Clément Lassieur
It seems that berlin is back online, you could try authenticating
berlin from the installer, and
use --substitute-urls="https://berlin.guixs.org" at every guix command.
See https://www.gnu.org/software/guix/manual/en/html_node/Substitute-Server-Authorization.html#Substitute-Server-Authorization
I have not done this before, but it should work.
Nalin Ranjan <ranjanified@gmail.com> ezt írta (időpont: 2018. okt.
29., H, 21:14):
>
> Thank you so much Clement.
>
> Any idea by when it could be?
>
> Also if someone can help me with the experience which I am going to write below, I will be really grateful.
>
> It's just that I am not trying to upgrade Guix, but have been trying to unsuccessfully install GuixSD for the first time ever on my laptop. In the past week or so I have ran the command system init like 7-8 times,and every time it fails into 504(Gateway timeout), or Patch not found(may be 404), and couple of occasions SHA mismatch. I tried running the default command as per documentation, also tried with --substitute-urls specified as mirror.hydra.gnu.org and/or berlin.guixsd.org a but end result being same. The install halts in the middle. When I specified --keep-going(and left for office), when I came back, I saw an infinite loop of 504s, just being printed out on the console repetitively for the same package.
>
> Then I tried specifying --fallback, which kind of seems to get the thing done. Though it takes innate amount of time to run(guess everything is getting compiled from bottom to top), but in the very last step it fails saying system error: grub failed to install. Phewwww, back to square one, yet another time.
>
> I have a ThinkPad T410 on which I am trying to do this. Currently I have a dual boot configuration running Ubuntu and Windows 7. Could that grub install failure because of my /boot not being empty and formatted afresh for GuixSD? If so, can anyone of you please help me in figuring out how to install GuixSD alongside those existing ones(other distros plus special Mr. Windows)? Do I need to reformat my /boot to make it fresh so that Grub install from GuixSD installation could succeed(not sure if this is the reason for failure).
>
> Since I have just this laptop, dedicating to GuixSD build from source is blocking me for a very long long time(Just now I spent a week so in trying to get it to completion, only to discover very late that a maintenance is up in progress). Please suggest as to how should I go about, having GuixSD installed along with preserving the older installations on my system?
>
> Let me know if I can help with any other information from my side. though new, I can always dig in to extract the necessary information.
>
> PS:- I am so new to FSF and its software, I may not sound as appropriate as I should while putting up my concerns. So please feel free to comment, advise or dictate anything that you may feel will let me into the right direction.
>
> Thanks and Regards
> Nalin Ranjan
>
> On Mon, Oct 29, 2018 at 8:23 PM Clément Lassieur <clement@lassieur.org> wrote:
>>
>> Hi Nalin,
>>
>> I don't think so.
>>
>> And Berlin's Continuous Integration doesn't work anymore, so there is
>> currently no way to upgrade Guix.
>>
>> Cheers,
>> Clément
>>
>> Nalin Ranjan <ranjanified@gmail.com> writes:
>>
>> > Hi Guys
>> > Is this Window over?
>> >
>> > Regards
>> > Nalin Ranjan
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re Recent hydra.gnu.org maintenance window
2018-10-29 19:07 ` Nalin Ranjan
2018-10-29 20:25 ` Gábor Boskovits
@ 2018-10-29 20:38 ` Björn Höfling
2018-10-29 20:45 ` Clément Lassieur
2 siblings, 0 replies; 6+ messages in thread
From: Björn Höfling @ 2018-10-29 20:38 UTC (permalink / raw)
To: Nalin Ranjan; +Cc: help-guix, clement
[-- Attachment #1: Type: text/plain, Size: 1415 bytes --]
Hi Nalin,
On Tue, 30 Oct 2018 00:37:29 +0530
Nalin Ranjan <ranjanified@gmail.com> wrote:
> It's just that I am not trying to upgrade Guix, but have been trying
> to unsuccessfully install GuixSD for the first time ever on my
> laptop. In the past week or so I have ran the command system init
> like 7-8 times,and every time it fails into 504(Gateway timeout), or
> Patch not found(may be 404), and couple of occasions SHA mismatch. I
In addition to what Gabor already said:
The 504 is possibly due to Hydra/Berlin not working.
The 404 could be a patch no longer existing on the net? Though I
thought we attach all patches directly to the packages?
But maybe it was not a patch but the package sources as such. That can
happen if you build from sources and they are gone. Unfortunately some
upstream maintainers don't let old sources stay on the server but only
the newest release.
Likewise the SHA mismatch could be because a tarball was updated
in-place. This problem also is the case with some github URLs.
If you get those 404s or SHA-mismatches again, you can try to recompile
a specific package with
guix build --no-substitutes <packagename>
and then concentrate on that specific package. You can then come back
with detailed log of just that package, then someone can investigate
and might update the package definition to reflect the changed world.
Björn
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re Recent hydra.gnu.org maintenance window
2018-10-29 19:07 ` Nalin Ranjan
2018-10-29 20:25 ` Gábor Boskovits
2018-10-29 20:38 ` Björn Höfling
@ 2018-10-29 20:45 ` Clément Lassieur
2 siblings, 0 replies; 6+ messages in thread
From: Clément Lassieur @ 2018-10-29 20:45 UTC (permalink / raw)
To: Nalin Ranjan; +Cc: help-guix
Hi Nalin!
Nalin Ranjan <ranjanified@gmail.com> writes:
> Thank you so much Clement.
>
> Any idea by when it could be?
The Berlin build farm is back, so it would be a good idea, I think, to
use only berlin.guixsd.org as substitute (unless hydra.gnu.org is back?
But I haven't heard about it).
As per https://bugs.gnu.org/33151, it is recommended to avoid using
mirror.hydra.gnu.org while hydra.gnu.org is down.
> Also if someone can help me with the experience which I am going to write
> below, I will be really grateful.
>
> It's just that I am not trying to upgrade Guix, but have been trying to
> unsuccessfully install GuixSD for the first time ever on my laptop. In the
> past week or so I have ran the command system init like 7-8 times,and every
> time it fails into 504(Gateway timeout), or Patch not found(may be 404),
> and couple of occasions SHA mismatch. I tried running the default command
> as per documentation, also tried with --substitute-urls specified as
> mirror.hydra.gnu.org and/or berlin.guixsd.org a but end result being same.
> The install halts in the middle. When I specified --keep-going(and left for
> office), when I came back, I saw an infinite loop of 504s, just being
> printed out on the console repetitively for the same package.
>
> Then I tried specifying --fallback, which kind of seems to get the thing
> done. Though it takes innate amount of time to run(guess everything is
> getting compiled from bottom to top), but in the very last step it fails
> saying system error: grub failed to install. Phewwww, back to square one,
> yet another time.
I think your best bet is to use --fallback, with the minimum
installation image, that is: the bare bones setup[1]. You need to have
a good internet connection, and... be patient.
[1]: https://www.gnu.org/software/guix/manual/en/html_node/Using-the-Configuration-System.html
> I have a ThinkPad T410 on which I am trying to do this. Currently I have a
> dual boot configuration running Ubuntu and Windows 7. Could that grub
> install failure because of my /boot not being empty and formatted afresh
> for GuixSD? If so, can anyone of you please help me in figuring out how to
> install GuixSD alongside those existing ones(other distros plus special Mr.
> Windows)? Do I need to reformat my /boot to make it fresh so that Grub
> install from GuixSD installation could succeed(not sure if this is the
> reason for failure).
>
> Since I have just this laptop, dedicating to GuixSD build from source is
> blocking me for a very long long time(Just now I spent a week so in trying
> to get it to completion, only to discover very late that a maintenance is
> up in progress). Please suggest as to how should I go about, having GuixSD
> installed along with preserving the older installations on my system?
I have no experience with Dual boot GuixSD, sorry! Maybe someone else
can help you though. There are plenty of people in #guix[2]. Don't
hesitate to come and ask questions! If you don't get answers
immediately, it's a good idea to stay anyway because people may reply
hours later ;-)
[2]: https://www.gnu.org/software/guix/contact/irc/
> Let me know if I can help with any other information from my side. though
> new, I can always dig in to extract the necessary information.
>
> PS:- I am so new to FSF and its software, I may not sound as appropriate as
> I should while putting up my concerns. So please feel free to comment,
> advise or dictate anything that you may feel will let me into the right
> direction.
You're very welcome :-)
Clément
^ permalink raw reply [flat|nested] 6+ messages in thread