(no subject)

[Dr. Ibrahim Y. EL-Nahhal]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Dear Guix Community,

I am writing to report an issue that I encountered while updating my GNU Guix System Distribution. I was able to successfully install it on my laptop, but when I ran "guix pull" and "guix system reconfigure", the updating process failed to install the bootloader on my ESP partition. As a result, when I rebooted my laptop, I couldn't boot normally to my GNU Guix System and no GRUB bootloader was found.

I tried to create a new USB stick for the installation of GNU Guix, and the installation proceeded well except for the last step which was the installation of the bootloader. I received a message about efibootmgr. Eventually, I switched to the installation of my NixOS Linux and successfully installed it on my HP laptop from which I am reporting this issue to the Guix community.

I would like to know if there is a stable branch for Guix in the same way as there is a stable branch of NixOS Linux. Also, I would appreciate any help or guidance on how to solve the above issue.

Thank you for your time and assistance.

Best regards,

- -- 
Dr. Ibrahim Y. EL-Nahhal
-----BEGIN PGP SIGNATURE-----
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=WiXQ
-----END PGP SIGNATURE-----

Re:

[Wojtek Kosior via]

[-- Attachment #1: Type: text/plain, Size: 3221 bytes --]

Hi there,

AFAIK there's no stable branch of Guix.

Please share the code of your Guix system configuration and the exact
error message you received.

I'd normally expect efibootmgr errors when trying to install a UEFI
variant of GRUB while being booted in legacy mode. So you can first
make sure your USB is booted in UEFI mode before trying to install a
UEFI GRUB. Alternatively, you can install the OS in legacy mode (i.e.
without using ESP) and then set your laptop to boot from disk in legacy
mode. Please look into Guix documentation to find information on how to
perform both types of installation

Best,
wojtek

-- (sig_start)
website: https://koszko.org/koszko.html
fingerprint: E972 7060 E3C5 637C 8A4F  4B42 4BC5 221C 5A79 FD1A
follow me on Fediverse: https://friendica.me/profile/koszko/profile

♥ R29kIGlzIHRoZXJlIGFuZCBsb3ZlcyBtZQ== | ÷ c2luIHNlcGFyYXRlZCBtZSBmcm9tIEhpbQ==
✝ YnV0IEplc3VzIGRpZWQgdG8gc2F2ZSBtZQ== | ? U2hhbGwgSSBiZWNvbWUgSGlzIGZyaWVuZD8=
-- (sig_end)


On Tue, 18 Jul 2023 13:13:18 +0300 Dr. Ibrahim Y. EL-Nahhal <elnahhal.i@gmail.com> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA256
> 
> Dear Guix Community,
> 
> I am writing to report an issue that I encountered while updating my GNU Guix System Distribution. I was able to successfully install it on my laptop, but when I ran "guix pull" and "guix system reconfigure", the updating process failed to install the bootloader on my ESP partition. As a result, when I rebooted my laptop, I couldn't boot normally to my GNU Guix System and no GRUB bootloader was found.
> 
> I tried to create a new USB stick for the installation of GNU Guix, and the installation proceeded well except for the last step which was the installation of the bootloader. I received a message about efibootmgr. Eventually, I switched to the installation of my NixOS Linux and successfully installed it on my HP laptop from which I am reporting this issue to the Guix community.
> 
> I would like to know if there is a stable branch for Guix in the same way as there is a stable branch of NixOS Linux. Also, I would appreciate any help or guidance on how to solve the above issue.
> 
> Thank you for your time and assistance.
> 
> Best regards,
> 
> - -- 
> Dr. Ibrahim Y. EL-Nahhal
> -----BEGIN PGP SIGNATURE-----
> 
> iQJJBAEBCAAzFiEEyz6U+Z8D5ICywdWs+5Wblsm+zXQFAmS2ZcsVHGVsbmFoaGFs
> LmlAZ21haWwuY29tAAoJEPuVm5bJvs10eA8P/Aro7Mf3BCBXYHDL4IeL7q9pY/KB
> UdZqCtCU5hm1vCx1lfyvqZjLKOj2ylySaUIywKARgKwL1P31QZ5y5h/b2IqzoZcQ
> 2hY/YAWHWWC9bsIB7zd8EAUWGsYe4NcuPmcTUp4oP77cXdd79wZK3cwfR+/4+8vE
> 8Q0QqmuSaYnKsY9XqK1hsIqpO6Rh6PKo22XQOvuSbYCRYJtEesMsXZeKOa39I4q+
> +gFFiRBWzH79PQjPJM53yCyDFzxGZGZP/9/qRUiw1hE2nlKX5uj/iIROm7W/7GGU
> NX0x9cgzkrMJzwj/V0t8Z1StGYB5AZgopsUxz60NCE4SS0izy/Gav3oPHkuhKGm4
> ICLEGrkoMEnmqlQ4eM2X3hnM6dc5rjpr8lQfrbXsy0N0NW+qDoGy3/nm+7tNEIBm
> n8Z21g67wnYn7d+oIDzHkgwYVh4Ij7RYM9UStMjgcfnoqizuGyXMHbojfbuhUlKL
> NID0FSExXbM2pZq/Gfap3gz33A2k9Cgy1E8/kqxorVokzVFu+kTaQW9KL2XtCYIN
> a4m7FIJbGhtix5RsPOODMMZnbeszyjuCzvVnlMJPc8xOZsb3SUcdd+dcPQnK9f49
> bv2pEmJMGqK8/TtTlJW9nyDFTJbw8sO/m+eiML5trl5YgkJ79GfoANhNN0b4yHzW
> 2kSfFVnrsMKVYph9
> =WiXQ
> -----END PGP SIGNATURE-----
> 

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 228 bytes --]