unofficial mirror of help-guix@gnu.org 
 help / color / mirror / Atom feed
* static-networking-service
@ 2018-05-31  7:44 Catonano
  2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Catonano @ 2018-05-31  7:44 UTC (permalink / raw)
  To: help-guix

[-- Attachment #1: Type: text/plain, Size: 251 bytes --]

I think I could use some help about how to set up a networing device to be
used as a "bridge" for the libvirt-manager bridged networking

In the manual I found a procedure named static-networking-service but I
have no idea about how to use it

Thanks

[-- Attachment #2: Type: text/html, Size: 332 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31  7:44 static-networking-service Catonano
@ 2018-05-31 10:00 ` Ricardo Wurmus
  2018-05-31 11:14   ` static-networking-service Julien Lepiller
  2018-12-16 18:09   ` static-networking-service George Clemmer
  2018-05-31 16:40 ` static-networking-service Oleg Pykhalov
  2018-06-10  7:31 ` static-networking-service Chris Marusich
  2 siblings, 2 replies; 10+ messages in thread
From: Ricardo Wurmus @ 2018-05-31 10:00 UTC (permalink / raw)
  To: Catonano; +Cc: help-guix


Catonano <catonano@gmail.com> writes:

> I think I could use some help about how to set up a networing device to be
> used as a "bridge" for the libvirt-manager bridged networking
>
> In the manual I found a procedure named static-networking-service but I
> have no idea about how to use it

The static-networking-service currently does not support setting up
bonding or bridges.  It’s something I need for berlin.guixsd.org,
actually, so I’d be very happy to see this implemented :)

--
Ricardo

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
@ 2018-05-31 11:14   ` Julien Lepiller
  2018-06-04 11:56     ` static-networking-service Ludovic Courtès
  2018-12-16 18:07     ` static-networking-service George Clemmer
  2018-12-16 18:09   ` static-networking-service George Clemmer
  1 sibling, 2 replies; 10+ messages in thread
From: Julien Lepiller @ 2018-05-31 11:14 UTC (permalink / raw)
  To: help-guix

Le 2018-05-31 12:00, Ricardo Wurmus a écrit :
> Catonano <catonano@gmail.com> writes:
> 
>> I think I could use some help about how to set up a networing device 
>> to be
>> used as a "bridge" for the libvirt-manager bridged networking
>> 
>> In the manual I found a procedure named static-networking-service but 
>> I
>> have no idea about how to use it
> 
> The static-networking-service currently does not support setting up
> bonding or bridges.  It’s something I need for berlin.guixsd.org,
> actually, so I’d be very happy to see this implemented :)
> 
> --
> Ricardo

static-networking-service is also limited to IPv4. I wanted to configure 
an
IPv6 address, so I quickly wrote a service for this:

(define (iproute2-shepherd-service config)
   (list (shepherd-service
           (documentation "Run the iproute2 network service")
           (provision '(networking))
           (requirement '())
           (start #~(lambda _
                      (let ((ip (string-append #$iproute "/sbin/ip")))
                        (system* ip "a" "add" "89.234.186.109/32" "dev" 
"ens18")
                        (system* ip "l" "set" "ens18" "up")
                        (system* ip "-6" "a" "add" "2a00:5884:8208::1/48" 
"dev" "ens18")
                        (system* ip "r" "add" "89.234.186.1" "dev" 
"ens18")
                        (system* ip "r" "add" "default" "via" 
"89.234.186.1" "dev" "ens18")
                        (system* ip "-6" "r" "add" "default" "via" 
"fe80::204:92:100:1" "dev" "ens18"))))
           (stop #~(lambda _
                     (display "Cannot stop iproute2 service.\n"))))))

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31  7:44 static-networking-service Catonano
  2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
@ 2018-05-31 16:40 ` Oleg Pykhalov
  2018-06-10  7:31 ` static-networking-service Chris Marusich
  2 siblings, 0 replies; 10+ messages in thread
From: Oleg Pykhalov @ 2018-05-31 16:40 UTC (permalink / raw)
  To: Catonano; +Cc: help-guix

[-- Attachment #1: Type: text/plain, Size: 1019 bytes --]

Hello Catonano,

Catonano <catonano@gmail.com> writes:

> I think I could use some help about how to set up a networing device to be
> used as a "bridge" for the libvirt-manager bridged networking
>
> In the manual I found a procedure named static-networking-service but I
> have no idea about how to use it

As Julien mentioned, you probably could wrote a service which invokes
shell commands.

From https://debbugs.gnu.org/cgi/bugreport.cgi?bug=28718#8
(WARNING: I remember a syntax error was somewhere in some ‘ip’ command):

--8<---------------cut here---------------start------------->8---
# ip link add bridge0 type bridge
# ip link set dev enp6s0 master bridge0
# ip link up bridge0
# dhclient bridge0
--8<---------------cut here---------------end--------------->8---

In /etc/qemu/bridge.conf (may not required for Libvirt):
--8<---------------cut here---------------start------------->8---
allow bridge0
--8<---------------cut here---------------end--------------->8---

Oleg.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31 11:14   ` static-networking-service Julien Lepiller
@ 2018-06-04 11:56     ` Ludovic Courtès
  2018-12-16 18:07     ` static-networking-service George Clemmer
  1 sibling, 0 replies; 10+ messages in thread
From: Ludovic Courtès @ 2018-06-04 11:56 UTC (permalink / raw)
  To: Julien Lepiller; +Cc: help-guix

Howdy,

Julien Lepiller <julien@lepiller.eu> skribis:

> static-networking-service is also limited to IPv4.

‘static-networking-shepherd-service’ has a number of hard-coded
“AF_INET”.  I’m quite confident that if we make them a parameter in
<static-networking>, we can get IPv6 support.

Would you like to give it a try?  :-)

Ludo’.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31  7:44 static-networking-service Catonano
  2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
  2018-05-31 16:40 ` static-networking-service Oleg Pykhalov
@ 2018-06-10  7:31 ` Chris Marusich
  2 siblings, 0 replies; 10+ messages in thread
From: Chris Marusich @ 2018-06-10  7:31 UTC (permalink / raw)
  To: Catonano; +Cc: help-guix

[-- Attachment #1: Type: text/plain, Size: 635 bytes --]

Catonano <catonano@gmail.com> writes:

> I think I could use some help about how to set up a networing device to be
> used as a "bridge" for the libvirt-manager bridged networking

What do you want to do?  It's possible that depending on what you want
to do, you might not need to set up a bridge.

For example, it took me quite a while to figure out how to connect to my
VM from the host machine when using virt-manager.  I thought I had to
forward ports, and I couldn't figure out how to do it.  But it turned
out that the guest was available directly via a local IP address, and I
just didn't realize it.

-- 
Chris

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31 11:14   ` static-networking-service Julien Lepiller
  2018-06-04 11:56     ` static-networking-service Ludovic Courtès
@ 2018-12-16 18:07     ` George Clemmer
  2018-12-16 19:01       ` static-networking-service Julien Lepiller
  1 sibling, 1 reply; 10+ messages in thread
From: George Clemmer @ 2018-12-16 18:07 UTC (permalink / raw)
  To: Julien Lepiller; +Cc: help-guix

Julien Lepiller <julien@lepiller.eu> writes:

> static-networking-service is also limited to IPv4. I wanted to
> configure an
> IPv6 address, so I quickly wrote a service for this:

> (define (iproute2-shepherd-service config)
>   (list (shepherd-service
>           (documentation "Run the iproute2 network service")
>           (provision '(networking))
>           (requirement '())
>           (start #~(lambda _
>                      (let ((ip (string-append #$iproute "/sbin/ip")))
>                        (system* ip "a" "add" "89.234.186.109/32" "dev"
> "ens18")
>                        (system* ip "l" "set" "ens18" "up")
>                        (system* ip "-6" "a" "add"
> "2a00:5884:8208::1/48" "dev" "ens18")
>                        (system* ip "r" "add" "89.234.186.1" "dev"
> "ens18")
>                        (system* ip "r" "add" "default" "via"
> "89.234.186.1" "dev" "ens18")
>                        (system* ip "-6" "r" "add" "default" "via"
> "fe80::204:92:100:1" "dev" "ens18"))))
>           (stop #~(lambda _
>                     (display "Cannot stop iproute2 service.\n"))))))

Hi Julien,

Are you actually using this? Does it simply (static-networking-service)?

TIA - George

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
  2018-05-31 11:14   ` static-networking-service Julien Lepiller
@ 2018-12-16 18:09   ` George Clemmer
  2018-12-16 21:57     ` static-networking-service Ricardo Wurmus
  1 sibling, 1 reply; 10+ messages in thread
From: George Clemmer @ 2018-12-16 18:09 UTC (permalink / raw)
  To: Ricardo Wurmus; +Cc: help-guix

Ricardo Wurmus <rekado@elephly.net> writes:

> The static-networking-service currently does not support setting up
> bonding or bridges.  It’s something I need for berlin.guixsd.org,
> actually, so I’d be very happy to see this implemented :)

Hi Ricardo,

Is this still an outstanding wish?

TIA - George

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-12-16 18:07     ` static-networking-service George Clemmer
@ 2018-12-16 19:01       ` Julien Lepiller
  0 siblings, 0 replies; 10+ messages in thread
From: Julien Lepiller @ 2018-12-16 19:01 UTC (permalink / raw)
  To: George Clemmer; +Cc: help-guix

I use it like that:  (service iproute2-service-type #t)

You can see my complete configuration on https://lepiller.eu/ma-configuration.html

Le 16 décembre 2018 19:07:15 GMT+01:00, George Clemmer <myglc2@gmail.com> a écrit :
>Julien Lepiller <julien@lepiller.eu> writes:
>
>> static-networking-service is also limited to IPv4. I wanted to
>> configure an
>> IPv6 address, so I quickly wrote a service for this:
>
>> (define (iproute2-shepherd-service config)
>>   (list (shepherd-service
>>           (documentation "Run the iproute2 network service")
>>           (provision '(networking))
>>           (requirement '())
>>           (start #~(lambda _
>>                      (let ((ip (string-append #$iproute "/sbin/ip")))
>>                        (system* ip "a" "add" "89.234.186.109/32"
>"dev"
>> "ens18")
>>                        (system* ip "l" "set" "ens18" "up")
>>                        (system* ip "-6" "a" "add"
>> "2a00:5884:8208::1/48" "dev" "ens18")
>>                        (system* ip "r" "add" "89.234.186.1" "dev"
>> "ens18")
>>                        (system* ip "r" "add" "default" "via"
>> "89.234.186.1" "dev" "ens18")
>>                        (system* ip "-6" "r" "add" "default" "via"
>> "fe80::204:92:100:1" "dev" "ens18"))))
>>           (stop #~(lambda _
>>                     (display "Cannot stop iproute2 service.\n"))))))
>
>Hi Julien,
>
>Are you actually using this? Does it simply
>(static-networking-service)?
>
>TIA - George

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: static-networking-service
  2018-12-16 18:09   ` static-networking-service George Clemmer
@ 2018-12-16 21:57     ` Ricardo Wurmus
  0 siblings, 0 replies; 10+ messages in thread
From: Ricardo Wurmus @ 2018-12-16 21:57 UTC (permalink / raw)
  To: George Clemmer; +Cc: help-guix


Hi George,

> Ricardo Wurmus <rekado@elephly.net> writes:
>
>> The static-networking-service currently does not support setting up
>> bonding or bridges.  It’s something I need for berlin.guixsd.org,
>> actually, so I’d be very happy to see this implemented :)
>
> Hi Ricardo,
>
> Is this still an outstanding wish?

Yes, this hasn’t been implemented yet.

-- 
Ricardo

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2018-12-16 21:57 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-05-31  7:44 static-networking-service Catonano
2018-05-31 10:00 ` static-networking-service Ricardo Wurmus
2018-05-31 11:14   ` static-networking-service Julien Lepiller
2018-06-04 11:56     ` static-networking-service Ludovic Courtès
2018-12-16 18:07     ` static-networking-service George Clemmer
2018-12-16 19:01       ` static-networking-service Julien Lepiller
2018-12-16 18:09   ` static-networking-service George Clemmer
2018-12-16 21:57     ` static-networking-service Ricardo Wurmus
2018-05-31 16:40 ` static-networking-service Oleg Pykhalov
2018-06-10  7:31 ` static-networking-service Chris Marusich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).