* I can`t boot guixsd in macbook
@ 2019-12-29 11:52 SergioBG BG
2019-12-29 20:13 ` pelzflorian (Florian Pelz)
0 siblings, 1 reply; 6+ messages in thread
From: SergioBG BG @ 2019-12-29 11:52 UTC (permalink / raw)
To: help-guix
Hi to all . I intended install guixsd in macbook 2009 and after download
iso and burn it with etcher in one usb I can't boot in my old mac , with
button start and option button nothing do.
With Debian buster no have problems with start , but guixsd is imposib.
The boot not show usb to start guixsd.
What am I doing wrong.
Sorry for my bad English , cheers
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: I can`t boot guixsd in macbook
2019-12-29 11:52 I can`t boot guixsd in macbook SergioBG BG
@ 2019-12-29 20:13 ` pelzflorian (Florian Pelz)
2019-12-29 20:37 ` pelzflorian (Florian Pelz)
0 siblings, 1 reply; 6+ messages in thread
From: pelzflorian (Florian Pelz) @ 2019-12-29 20:13 UTC (permalink / raw)
To: SergioBG BG; +Cc: help-guix
Hi,
On Sun, Dec 29, 2019 at 12:52:23PM +0100, SergioBG BG wrote:
> Hi to all . I intended install guixsd in macbook 2009 and after download
> iso and burn it with etcher in one usb I can't boot in my old mac , with
> button start and option button nothing do.
> With Debian buster no have problems with start , but guixsd is imposib.
> The boot not show usb to start guixsd.
> What am I doing wrong.
> Sorry for my bad English , cheers
This bug has long been fixed in git master after 1.0.1, but there has
not been a new release of downloadable Guix System images since then.
You could install Guix on another operating system or on another
computer, download the Guix source code and run in a terminal
cd path/to/guix/source
guix system disk-image --file-system-type=iso9660 \
gnu/system/install.scm
The command is from here:
https://guix.gnu.org/manual/en/html_node/Building-the-Installation-Image.html
Regards,
Florian
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: I can`t boot guixsd in macbook
2019-12-29 20:13 ` pelzflorian (Florian Pelz)
@ 2019-12-29 20:37 ` pelzflorian (Florian Pelz)
2019-12-30 7:57 ` Efraim Flashner
0 siblings, 1 reply; 6+ messages in thread
From: pelzflorian (Florian Pelz) @ 2019-12-29 20:37 UTC (permalink / raw)
To: SergioBG BG; +Cc: help-guix
On Sun, Dec 29, 2019 at 09:13:38PM +0100, pelzflorian (Florian Pelz) wrote:
> Hi,
>
> On Sun, Dec 29, 2019 at 12:52:23PM +0100, SergioBG BG wrote:
> > Hi to all . I intended install guixsd in macbook 2009 and after download
> > iso and burn it with etcher in one usb I can't boot in my old mac , with
> > button start and option button nothing do.
> > With Debian buster no have problems with start , but guixsd is imposib.
> > The boot not show usb to start guixsd.
> > What am I doing wrong.
> > Sorry for my bad English , cheers
>
> This bug has long been fixed in git master after 1.0.1, but there has
> not been a new release of downloadable Guix System images since then.
> You could install Guix on another operating system or on another
> computer, download the Guix source code and run in a terminal
>
> cd path/to/guix/source
> guix system disk-image --file-system-type=iso9660 \
> gnu/system/install.scm
>
> The command is from here:
>
> https://guix.gnu.org/manual/en/html_node/Building-the-Installation-Image.html
>
> Regards,
> Florian
>
P.S. Alternatively, I believe installation from DVD works fine.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: I can`t boot guixsd in macbook
2019-12-29 20:37 ` pelzflorian (Florian Pelz)
@ 2019-12-30 7:57 ` Efraim Flashner
2019-12-30 10:32 ` pelzflorian (Florian Pelz)
0 siblings, 1 reply; 6+ messages in thread
From: Efraim Flashner @ 2019-12-30 7:57 UTC (permalink / raw)
To: pelzflorian (Florian Pelz); +Cc: help-guix
[-- Attachment #1: Type: text/plain, Size: 1956 bytes --]
On Sun, Dec 29, 2019 at 09:37:03PM +0100, pelzflorian (Florian Pelz) wrote:
> On Sun, Dec 29, 2019 at 09:13:38PM +0100, pelzflorian (Florian Pelz) wrote:
> > Hi,
> >
> > On Sun, Dec 29, 2019 at 12:52:23PM +0100, SergioBG BG wrote:
> > > Hi to all . I intended install guixsd in macbook 2009 and after download
> > > iso and burn it with etcher in one usb I can't boot in my old mac , with
> > > button start and option button nothing do.
> > > With Debian buster no have problems with start , but guixsd is imposib.
> > > The boot not show usb to start guixsd.
> > > What am I doing wrong.
> > > Sorry for my bad English , cheers
> >
> > This bug has long been fixed in git master after 1.0.1, but there has
> > not been a new release of downloadable Guix System images since then.
> > You could install Guix on another operating system or on another
> > computer, download the Guix source code and run in a terminal
> >
> > cd path/to/guix/source
> > guix system disk-image --file-system-type=iso9660 \
> > gnu/system/install.scm
> >
> > The command is from here:
> >
> > https://guix.gnu.org/manual/en/html_node/Building-the-Installation-Image.html
> >
> > Regards,
> > Florian
> >
>
> P.S. Alternatively, I believe installation from DVD works fine.
>
I last installed my macbook pre-1.0 so my memory is a bit hazy. My case
was a little different, I wanted a btrfs root on my macbook. In the end
I believe I used a Debian netinstall to get a minimal system, used the
guix-install.sh script and then installed Guix over Debian.
Another option I believe I've used in the past is I've actually taken
the HDD out of my macbook, installed to it, and then put it back inside
the machine.
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: I can`t boot guixsd in macbook
2019-12-30 7:57 ` Efraim Flashner
@ 2019-12-30 10:32 ` pelzflorian (Florian Pelz)
2019-12-30 11:03 ` SergioBG BG
0 siblings, 1 reply; 6+ messages in thread
From: pelzflorian (Florian Pelz) @ 2019-12-30 10:32 UTC (permalink / raw)
To: Efraim Flashner; +Cc: help-guix
On Mon, Dec 30, 2019 at 09:57:24AM +0200, Efraim Flashner wrote:
> I last installed my macbook pre-1.0 so my memory is a bit hazy. My case
> was a little different, I wanted a btrfs root on my macbook. In the end
> I believe I used a Debian netinstall to get a minimal system, used the
> guix-install.sh script and then installed Guix over Debian.
>
This is a third way. Maybe it’s necessary in case a current
installation image’s kernel may be too new. The 1.0.1 DVD should
work, at least on an external DVD drive (my internal DVD drive fails
at least sometimes).
I cannot even use a current LTS kernel anymore on my 2010 Macbook, but
I believe the reason is a defect in my Macbook’s GPU which I presume
would not affect others, because there are error messages in dmesg and
occasional crashes and system freezes in Blender and VLC too. I hope
others do not need this, but this is why instead I use inferiors like
https://lists.gnu.org/archive/html/help-guix/2019-11/msg00143.html
TL;DR affected machines are getting old, but can be made to work.
> Another option I believe I've used in the past is I've actually taken
> the HDD out of my macbook, installed to it, and then put it back inside
> the machine.
>
You could also boot from e.g. a Debian USB flash drive, install and
update Guix on it and perform a manual installation from such a Debian
live system.
Regards,
Florian
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: I can`t boot guixsd in macbook
2019-12-30 10:32 ` pelzflorian (Florian Pelz)
@ 2019-12-30 11:03 ` SergioBG BG
0 siblings, 0 replies; 6+ messages in thread
From: SergioBG BG @ 2019-12-30 11:03 UTC (permalink / raw)
To: pelzflorian (Florian Pelz); +Cc: help-guix
Ok thanks for the info , I think I will try to install with DVD.
Cheers
El lun., 30 dic. 2019 a las 11:32, pelzflorian (Florian Pelz) (<
pelzflorian@pelzflorian.de>) escribió:
> On Mon, Dec 30, 2019 at 09:57:24AM +0200, Efraim Flashner wrote:
> > I last installed my macbook pre-1.0 so my memory is a bit hazy. My case
> > was a little different, I wanted a btrfs root on my macbook. In the end
> > I believe I used a Debian netinstall to get a minimal system, used the
> > guix-install.sh script and then installed Guix over Debian.
> >
>
> This is a third way. Maybe it’s necessary in case a current
> installation image’s kernel may be too new. The 1.0.1 DVD should
> work, at least on an external DVD drive (my internal DVD drive fails
> at least sometimes).
>
> I cannot even use a current LTS kernel anymore on my 2010 Macbook, but
> I believe the reason is a defect in my Macbook’s GPU which I presume
> would not affect others, because there are error messages in dmesg and
> occasional crashes and system freezes in Blender and VLC too. I hope
> others do not need this, but this is why instead I use inferiors like
>
> https://lists.gnu.org/archive/html/help-guix/2019-11/msg00143.html
>
> TL;DR affected machines are getting old, but can be made to work.
>
> > Another option I believe I've used in the past is I've actually taken
> > the HDD out of my macbook, installed to it, and then put it back inside
> > the machine.
> >
>
> You could also boot from e.g. a Debian USB flash drive, install and
> update Guix on it and perform a manual installation from such a Debian
> live system.
>
> Regards,
> Florian
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-12-30 11:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-12-29 11:52 I can`t boot guixsd in macbook SergioBG BG
2019-12-29 20:13 ` pelzflorian (Florian Pelz)
2019-12-29 20:37 ` pelzflorian (Florian Pelz)
2019-12-30 7:57 ` Efraim Flashner
2019-12-30 10:32 ` pelzflorian (Florian Pelz)
2019-12-30 11:03 ` SergioBG BG
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).