Intel 13700k iGPU not recognised

Intel 13700k iGPU not recognised

[Erik Giorgis]

Hi

I installed guix on a new system, and would like to use Hyprland with it. I already have Hyprland working on an older laptop. 
However, on this new system I get an error that the iGPU is not supported by mesa. 

A quick lspci:

VGA compatible controller: Intel Corporation Device a780

Also a lot of other devices are just marked as "Intel corporation device", and not recognized (it seems).
I tried booting another OS, and the iGPU is correctly recognized as a UHD 770.

I'm having this problem while on kernel 6.2.7, haven't tried other versions.

Thank you a lot in advance,
Erik

Re: Intel 13700k iGPU not recognised

[Felix Lechner via]

Hi Erik,

On Mon, Mar 20, 2023 at 4:12 PM Erik Giorgis <egiorgis@egiorg.is> wrote:
>
> Hi
>
> I installed guix on a new system, and would like to use Hyprland with it. I already have Hyprland working on an older laptop.
> However, on this new system I get an error that the iGPU is not supported by mesa.

It looks like Mesa3d support for your Raptor Lake GPU with PCI id
0xa780 was merged on January 25, 2022. [1]

Guix presently ships version 21.3.8 of the Mesa library. [2] As I
understand, it contains merely bug fixes for Mesa 21.3.0, which was
released on November 17, 2021. [3] The version in Guix currently
therefore appears insufficient for your advanced—and I am sure, very
exciting—equipment.

Fortunately, an update of Mesa3d to version 22.2.1 is pending in our
'core-updates' branch. [4] The merge process for that branch was
delayed a bit this time, but the updates should become available to
the general public soon. I think we are talking about a few weeks.
Please hang in there!

Among Guix contributors, Kaelyn Takata is probably better positioned
than I to validate or correct any information above. I copied Kaelyn.

As a side note, I also saw another potentially helpful patch by Dr.
Arne Babenhauser [5] but I am not sure how it fits into the pending
merge of "core-updates". Arne was likewise copied.

Sorry if the news is not as good as what you were hoping for. We are
working hard on your behalf. Thank you for using Guix!

Kind regards
Felix

[1] https://gitlab.freedesktop.org/mesa/mesa/-/commit/4e0eca7dc34942759638ab00eb006ba40284a7c5
[2] https://packages.guix.gnu.org/search/?query=mesa
[3] https://docs.mesa3d.org/relnotes/21.3.0.html
[4] https://issues.guix.gnu.org/58566
[5] https://issues.guix.gnu.org/62176

Re: Intel 13700k iGPU not recognised

[Kaelyn]

Hi Erik and Felix,

------- Original Message -------
On Tuesday, March 21st, 2023 at 12:26 AM, Felix Lechner <felix.lechner@lease-up.com> wrote:


> 
> 
> Hi Erik,
> 
> On Mon, Mar 20, 2023 at 4:12 PM Erik Giorgis egiorgis@egiorg.is wrote:
> 
> > Hi
> > 
> > I installed guix on a new system, and would like to use Hyprland with it. I already have Hyprland working on an older laptop.
> > However, on this new system I get an error that the iGPU is not supported by mesa.
> 
> 
> It looks like Mesa3d support for your Raptor Lake GPU with PCI id
> 0xa780 was merged on January 25, 2022. [1]
> 
> Guix presently ships version 21.3.8 of the Mesa library. [2] As I
> understand, it contains merely bug fixes for Mesa 21.3.0, which was
> released on November 17, 2021. [3] The version in Guix currently
> therefore appears insufficient for your advanced—and I am sure, very
> exciting—equipment.
> 
> Fortunately, an update of Mesa3d to version 22.2.1 is pending in our
> 'core-updates' branch. [4] The merge process for that branch was
> delayed a bit this time, but the updates should become available to
> the general public soon. I think we are talking about a few weeks.
> Please hang in there!
> 
> Among Guix contributors, Kaelyn Takata is probably better positioned
> than I to validate or correct any information above. I copied Kaelyn.

Technically 'core-updates' has mesa 22.2.4 as of commit e5af53c51d, but otherwise that should be correct. Mesa 22.2.0 was released in Sept 2022, so should support your Raptor Lake GPU.

Cheers,
Kaelyn

> 
> As a side note, I also saw another potentially helpful patch by Dr.
> Arne Babenhauser [5] but I am not sure how it fits into the pending
> merge of "core-updates". Arne was likewise copied.
> 
> Sorry if the news is not as good as what you were hoping for. We are
> working hard on your behalf. Thank you for using Guix!
> 
> Kind regards
> Felix
> 
> [1] https://gitlab.freedesktop.org/mesa/mesa/-/commit/4e0eca7dc34942759638ab00eb006ba40284a7c5
> [2] https://packages.guix.gnu.org/search/?query=mesa
> [3] https://docs.mesa3d.org/relnotes/21.3.0.html
> [4] https://issues.guix.gnu.org/58566
> [5] https://issues.guix.gnu.org/62176

Re: Intel 13700k iGPU not recognised

[Samuel Schmidt]

Hi Erik,

not directly related to your problem, sorry, but if I understood you correctly, you managed to use Hyprland on Guix? Can you share how you packaged it? :) 

Thank you in advance,

Samuel

Am 21.03.2023 um 00:11, Erik Giorgis <egiorgis@egiorg.is> schrieb:Hi

I installed guix on a new system, and would like to use Hyprland with it. I
already have Hyprland working on an older laptop. 
However, on this new system I get an error that the iGPU is not supported by
mesa. 

A quick lspci:

VGA compatible controller: Intel Corporation Device a780

Also a lot of other devices are just marked as "Intel corporation device", and
not recognized (it seems).
I tried booting another OS, and the iGPU is correctly recognized as a UHD 770.

I'm having this problem while on kernel 6.2.7, haven't tried other versions.

Thank you a lot in advance,
Erik

Re: Intel 13700k iGPU not recognised

[Erik Giorgis]

Hi Samuel

Actually, I didn't package it. I found it available in this channel https://github.com/rakino/Rosenthal
When looking for packages I've found querying github for "language:scheme <pkgname>" very useful.

Have fun with Hyprland!

Erik

On Fri, Mar 24, 2023, at 16:54, Samuel Schmidt wrote:
> Hi Erik,
> 
> not directly related to your problem, sorry, but if I understood you correctly, you managed to use Hyprland on Guix? Can you share how you packaged it? :) 
> 
> Thank you in advance,
> 
> Samuel

Re: Intel 13700k iGPU not recognised

[Erik Giorgis]

Hi Felix and Kaelyn

Thank you for the prompt and detailed reply! 

I get mesa being too old for my CPU, and I also tried installing a newer mesa version (that I found packaged in the wild, could also be that it wasn't perfectly packaged but it built fine). 

What confuses me more is the output of lspci, I just booted a new Guix installation  iso and dropped into a terminal, and this is the output from lspci:

00:00.0 Host bridge: Intel Corporation Device a703 (rev 01)
00:02.0 VGA compatible controller: Intel Corporation Device a780 (rev 04)
00:08.0 System peripheral: Intel Corporation Device a74f (rev 01)
00:0a.0 Signal processing controller: Intel Corporation Device a77d (rev 01)
00:14.0 USB controller: Intel Corporation Device 7ae0 (rev 11)
00:14.2 RAM memory: Intel Corporation Device 7aa7 (rev 11)
00:16.0 Communication controller: Intel Corporation Device 7ae8 (rev 11)
00:17.0 SATA controller: Intel Corporation Device 7ae2 (rev 11)
00:1c.0 PCI bridge: Intel Corporation Device 7ab8 (rev 11)
00:1c.1 PCI bridge: Intel Corporation Device 7ab9 (rev 11)
00:1c.3 PCI bridge: Intel Corporation Device 7abb (rev 11)
00:1f.0 ISA bridge: Intel Corporation Device 7a86 (rev 11)
00:1f.3 Audio device: Intel Corporation Device 7ad0 (rev 11)
00:1f.4 SMBus: Intel Corporation Device 7aa3 (rev 11)
00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 7aa4 (rev 11)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)

Just for reference, the kernel version: (but I had the same problem with the 6.2.7 kernel)
Linux gnu 6.0.10-gnu #1 SMP PREEMPT_DYNAMIC 1 x86_64 GNU/Linux

Before mesa, shouldn't the kernel take care of these devices? When on a different distro I get:

00:00.0 Host bridge: Intel Corporation Device a703 (rev 01)
00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S UHD Graphics (rev 04)
00:08.0 System peripheral: Intel Corporation Device a74f (rev 01)
00:0a.0 Signal processing controller: Intel Corporation Device a77d (rev 01)
00:14.0 USB controller: Intel Corporation Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller (rev 11)
00:14.2 RAM memory: Intel Corporation Alder Lake-S PCH Shared SRAM (rev 11)
00:16.0 Communication controller: Intel Corporation Alder Lake-S PCH HECI Controller #1 (rev 11)
00:17.0 SATA controller: Intel Corporation Alder Lake-S PCH SATA Controller [AHCI Mode] (rev 11)
00:1c.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #1 (rev 11)
00:1c.1 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #2 (rev 11)
00:1c.3 PCI bridge: Intel Corporation Device 7abb (rev 11)
00:1f.0 ISA bridge: Intel Corporation Device 7a86 (rev 11)
00:1f.3 Audio device: Intel Corporation Alder Lake-S HD Audio Controller (rev 11)
00:1f.4 SMBus: Intel Corporation Alder Lake-S PCH SMBus Controller (rev 11)
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-S PCH SPI Controller (rev 11)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
03:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02)

So might be that the problem is elsewhere, besides mesa?

Thank you and best regards,
Erik

On Tue, Mar 21, 2023, at 02:13, Kaelyn wrote:
> Hi Erik and Felix,
> 
> ------- Original Message -------
> On Tuesday, March 21st, 2023 at 12:26 AM, Felix Lechner <felix.lechner@lease-up.com> wrote:
> 
> 
> > 
> > 
> > Hi Erik,
> > 
> > On Mon, Mar 20, 2023 at 4:12 PM Erik Giorgis egiorgis@egiorg.is wrote:
> > 
> > > Hi
> > > 
> > > I installed guix on a new system, and would like to use Hyprland with it. I already have Hyprland working on an older laptop.
> > > However, on this new system I get an error that the iGPU is not supported by mesa.
> > 
> > 
> > It looks like Mesa3d support for your Raptor Lake GPU with PCI id
> > 0xa780 was merged on January 25, 2022. [1]
> > 
> > Guix presently ships version 21.3.8 of the Mesa library. [2] As I
> > understand, it contains merely bug fixes for Mesa 21.3.0, which was
> > released on November 17, 2021. [3] The version in Guix currently
> > therefore appears insufficient for your advanced—and I am sure, very
> > exciting—equipment.
> > 
> > Fortunately, an update of Mesa3d to version 22.2.1 is pending in our
> > 'core-updates' branch. [4] The merge process for that branch was
> > delayed a bit this time, but the updates should become available to
> > the general public soon. I think we are talking about a few weeks.
> > Please hang in there!
> > 
> > Among Guix contributors, Kaelyn Takata is probably better positioned
> > than I to validate or correct any information above. I copied Kaelyn.
> 
> Technically 'core-updates' has mesa 22.2.4 as of commit e5af53c51d, but otherwise that should be correct. Mesa 22.2.0 was released in Sept 2022, so should support your Raptor Lake GPU.
> 
> Cheers,
> Kaelyn
> 
> > 
> > As a side note, I also saw another potentially helpful patch by Dr.
> > Arne Babenhauser [5] but I am not sure how it fits into the pending
> > merge of "core-updates". Arne was likewise copied.
> > 
> > Sorry if the news is not as good as what you were hoping for. We are
> > working hard on your behalf. Thank you for using Guix!
> > 
> > Kind regards
> > Felix
> > 
> > [1] https://gitlab.freedesktop.org/mesa/mesa/-/commit/4e0eca7dc34942759638ab00eb006ba40284a7c5
> > [2] https://packages.guix.gnu.org/search/?query=mesa
> > [3] https://docs.mesa3d.org/relnotes/21.3.0.html
> > [4] https://issues.guix.gnu.org/58566
> > [5] https://issues.guix.gnu.org/62176
> 
> 

Re: Intel 13700k iGPU not recognised

[Felix Lechner via]

Hi Erik,

On Fri, Mar 24, 2023 at 9:44 AM Erik Giorgis <egiorgis@egiorg.is> wrote:
>
> 00:02.0 VGA compatible controller: Intel Corporation Device a780 (rev 04)
>
> shouldn't the kernel take care of these devices? When on a different distro I get:
>
> 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S UHD Graphics (rev 04)

Are you running the linux-libre kernel, which is the default kernel in Guix?

Kind regards,
Felix Lechner

Re: Intel 13700k iGPU not recognised

[Erik Giorgis]

Well, on Guix it's the libre kernel, for the other distro it's the non-libre kernel.
But my lspci output looked similar on Guix on the non-libre Linux 6.2.7

Best,
Erik

On Fri, Mar 24, 2023, at 17:49, Felix Lechner wrote:
> Hi Erik,
> 
> On Fri, Mar 24, 2023 at 9:44 AM Erik Giorgis <egiorgis@egiorg.is> wrote:
> >
> > 00:02.0 VGA compatible controller: Intel Corporation Device a780 (rev 04)
> >
> > shouldn't the kernel take care of these devices? When on a different distro I get:
> >
> > 00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S UHD Graphics (rev 04)
> 
> Are you running the linux-libre kernel, which is the default kernel in Guix?
> 
> Kind regards,
> Felix Lechner
> 

Re: Intel 13700k iGPU not recognised

[Felix Lechner via]

Hi Erik,

On Fri, Mar 24, 2023 at 10:07 AM Erik Giorgis <egiorgis@egiorg.is> wrote:
>
> But my lspci output looked similar on Guix on the non-libre Linux 6.2.7

Sorry, I wasn't thinking straight and got confused with dmesg output.
Which version of pciutils are you using on the other distro, please?

Guix is still on pciutils version 3.7.0, which was released on May 31, 2020. [1]

Kind regards
Felix

[1] https://mj.ucw.cz/download/linux/pci/

Re: Intel 13700k iGPU not recognised

[Erik Giorgis]

It's 3.8, that explains the different output then. 

On Fri, Mar 24, 2023, at 18:11, Felix Lechner wrote:
> Hi Erik,
> 
> On Fri, Mar 24, 2023 at 10:07 AM Erik Giorgis <egiorgis@egiorg.is> wrote:
> >
> > But my lspci output looked similar on Guix on the non-libre Linux 6.2.7
> 
> Sorry, I wasn't thinking straight and got confused with dmesg output.
> Which version of pciutils are you using on the other distro, please?
> 
> Guix is still on pciutils version 3.7.0, which was released on May 31, 2020. [1]
> 
> Kind regards
> Felix
> 
> [1] https://mj.ucw.cz/download/linux/pci/
> 

Re: Intel 13700k iGPU not recognised

[Felix Lechner via]

Hi Erik,

On Fri, Mar 24, 2023 at 10:18 AM Erik Giorgis <egiorgis@egiorg.is> wrote:
>
> It's 3.8, that explains the different output then.

The output from pciutils is secondary, but I am sorry about the
experience you've had so far.

As the owner of new equipment, you may find the Repology website
helpful. It can help you evaluate where your equipment is supported.
For example, here are the links for pciutils [1] and mesa. [2] You can
see which versions are available on different distributions.

I hope that information helps you find a setup that works for you this weekend.

Again, thanks for using Guix!

Kind regards,
Felix

[1] https://repology.org/project/pciutils/versions
[2] https://repology.org/project/mesa/versions