;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2015 Taylan Ulrich Bayırlı/Kammer ;;; Copyright © 2015, 2016, 2017, 2018, 2019, 2020, 2024 Ricardo Wurmus ;;; Copyright © 2015, 2016 Ben Woodcroft ;;; Copyright © 2015 Roel Janssen ;;; Copyright © 2016 Jelle Licht ;;; Copyright © 2016 Alex Griffin ;;; Copyright © 2016, 2018, 2019, 2020, 2023 Efraim Flashner ;;; Copyright © 2016 Nikita ;;; Copyright © 2016, 2020 Marius Bakke ;;; Copyright © 2017 Eric Bavier ;;; Copyright © 2017 Rene Saavedra ;;; Copyright © 2017,2019 Hartmut Goebel ;;; Copyright © 2017 Kei Kebreau ;;; Copyright © 2017 Alex Vong ;;; Copyright © 2018, 2019, 2020 Tobias Geerinckx-Rice ;;; Copyright © 2018 Pierre Neidhardt ;;; Copyright © 2018 Meiyo Peng ;;; Copyright © 2019 Yoshinori Arai ;;; Copyright © 2019 Mădălin Ionel Patrașcu ;;; Copyright © 2019 Wiktor Żelazny ;;; Copyright © 2020 Maxim Cournoyer ;;; Copyright © 2021 Jean-Baptiste Volatier ;;; Copyright © 2021 Simon Tournier ;;; Copyright © 2021 Felix Gruber ;;; Copyright © 2021 Bonface Munyoki Kilyungi ;;; Copyright © 2022 Gabriel Wicki ;;; Copyright © 2022 Paul A. Patience ;;; Copyright © 2023 Reza Housseini ;;; Copyright © 2023 Hilton Chain ;;; Copyright © 2023, 2024 Zheng Junjie <873216071@qq.com> ;;; Copyright © 2024 Timotej Lazar ;;; Copyright © 2024 Sharlatan Hellseher ;;; Copyright © 2024 Ashish SHUKLA ;;; Copyright © 2024 Artyom V. Poptsov ;;; ;;; This file is part of GNU Guix. ;;; ;;; GNU Guix is free software; you can redistribute it and/or modify it ;;; under the terms of the GNU General Public License as published by ;;; the Free Software Foundation; either version 3 of the License, or (at ;;; your option) any later version. ;;; ;;; GNU Guix is distributed in the hope that it will be useful, but ;;; WITHOUT ANY WARRANTY; without even the implied warranty of ;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;;; GNU General Public License for more details. ;;; ;;; You should have received a copy of the GNU General Public License ;;; along with GNU Guix. If not, see . (define-module (gnu packages textutils) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix build-system ant) #:use-module (guix build-system cmake) #:use-module (guix build-system gnu) #:use-module (guix build-system go) #:use-module (guix build-system perl) #:use-module (guix build-system python) #:use-module (guix download) #:use-module (guix gexp) #:use-module (guix git-download) #:use-module (guix packages) #:use-module (guix utils) #:use-module (gnu packages) #:use-module (gnu packages autotools) #:use-module (gnu packages base) #:use-module (gnu packages check) #:use-module (gnu packages compression) #:use-module (gnu packages gcc) #:use-module (gnu packages gettext) #:use-module (gnu packages golang) #:use-module (gnu packages golang-build) #:use-module (gnu packages golang-check) #:use-module (gnu packages golang-compression) #:use-module (gnu packages golang-crypto) #:use-module (gnu packages golang-xyz) #:use-module (gnu packages java) #:use-module (gnu packages ncurses) #:use-module (gnu packages pcre) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages python-build) #:use-module (gnu packages python-check) #:use-module (gnu packages python-web) #:use-module (gnu packages python-xyz) #:use-module (gnu packages readline) #:use-module (gnu packages ruby) #:use-module (gnu packages slang) #:use-module (gnu packages web) #:use-module (gnu packages xorg)) (define-public dos2unix (package (name "dos2unix") (version "7.5.2") (source (origin (method url-fetch) (uri (string-append "https://waterlan.home.xs4all.nl/dos2unix/" "dos2unix-" version ".tar.gz")) (sha256 (base32 "0fmzqhwq5y14gv5p4kin5flv6g1hvbv0mhlniys2wi08cr244ir6")))) (build-system gnu-build-system) (arguments (list #:make-flags #~(list (string-append "CC=" #$(cc-for-target)) (string-append "prefix=" #$output)) #:phases #~(modify-phases %standard-phases (delete 'configure)))) ; no configure script (native-inputs (list gettext-minimal perl)) (home-page "https://waterlan.home.xs4all.nl/dos2unix.html") (synopsis "DOS/Mac to Unix and vice versa text file format converter") (description "dos2unix is a tool to convert line breaks in a text file from Unix format to DOS format and vice versa.") (license license:bsd-2))) (define-public recode (package (name "recode") (version "3.7.6") (source (origin (method url-fetch) (uri (string-append "https://github.com/rrthomas/recode/releases/" "download/v" version "/recode-" version ".tar.gz")) (sha256 (base32 "0m59sd1ca0zw1aydpc3m8sw03nc885knmccqryg7byzmqs585ia6")))) (build-system gnu-build-system) (native-inputs (list python python-cython)) (home-page "https://github.com/rrthomas/recode") (synopsis "Text encoding converter") (description "The Recode library converts files between character sets and usages. It recognises or produces over 200 different character sets (or about 300 if combined with an iconv library) and transliterates files between almost any pair. When exact transliteration are not possible, it gets rid of offending characters or falls back on approximations. The recode program is a handy front-end to the library.") (license license:gpl3+))) (define-public enca (package (name "enca") (version "1.19") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/nijel/enca") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "19q7cwwxmmk5j9438bsqdpjvdjawsd3zmw1zyqgi7s4m0rasr3ah")))) (build-system gnu-build-system) ;; enca-1.19 tests fail with recent recode. ;(inputs `(("recode" ,recode))) (home-page "https://github.com/nijel/enca") (synopsis "Text encoding detection tool") (description "Enca (Extremely Naive Charset Analyser) consists of libenca, an encoding detection library, and enca, a command line frontend, integrating libenca and several charset conversion libraries and tools.") (license license:gpl2))) (define-public utf8proc (package (name "utf8proc") (version "2.5.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/JuliaStrings/utf8proc") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1xlkazhdnja4lksn5c9nf4bln5gjqa35a8gwlam5r0728w0h83qq")))) (build-system gnu-build-system) (native-inputs (let ((UNICODE_VERSION "13.0.0")) ; defined in data/Makefile ;; Test data that is otherwise downloaded with curl. `(("NormalizationTest.txt" ,(origin (method url-fetch) (uri (string-append "https://www.unicode.org/Public/" UNICODE_VERSION "/ucd/NormalizationTest.txt")) (sha256 (base32 "07g0ya4f6zfzvpp24ccxkb2yq568kh83gls85rjl950nv5fya3nn")))) ("GraphemeBreakTest.txt" ,(origin (method url-fetch) (uri (string-append "https://www.unicode.org/Public/" UNICODE_VERSION "/ucd/auxiliary/GraphemeBreakTest.txt")) (sha256 (base32 "07f8rrvcsq4pibdz6zxggxy8w7zjjqyw2ggclqlhalyv45yv7prj")))) ;; For tests. ("perl" ,perl)))) (arguments `(#:make-flags (list ,(string-append "CC=" (cc-for-target)) (string-append "prefix=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'check 'check-data (lambda* (#:key ,@(if (%current-target-system) '(native-inputs) '()) inputs #:allow-other-keys) (for-each (lambda (i) (copy-file (assoc-ref ,@(if (%current-target-system) '((or native-inputs inputs)) '(inputs)) i) (string-append "data/" i))) '("NormalizationTest.txt" "GraphemeBreakTest.txt")) (substitute* "data/GraphemeBreakTest.txt" (("÷") "/") (("×") "+")) #t))))) (home-page "https://juliastrings.github.io/utf8proc/") (synopsis "C library for processing UTF-8 Unicode data") (description "utf8proc is a small C library that provides Unicode normalization, case-folding, and other operations for data in the UTF-8 encoding, supporting Unicode version 9.0.0.") (license license:expat))) (define-public utf8proc-2.7.0 (package (inherit utf8proc) (name "utf8proc") (version "2.7.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/JuliaStrings/utf8proc") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1wrsmnaigal94gc3xbzdrrm080zjhihjfdla5admllq2w5dladjj")))) (arguments (substitute-keyword-arguments (package-arguments utf8proc) ((#:phases phases) `(modify-phases ,phases (replace 'check-data (lambda* (#:key inputs native-inputs #:allow-other-keys) (display native-inputs) (for-each (lambda (i) (copy-file (assoc-ref (or native-inputs inputs) i) (string-append "data/" i))) '("NormalizationTest.txt" "GraphemeBreakTest.txt" "DerivedCoreProperties.txt")))))))) (native-inputs (append (package-native-inputs utf8proc) (let ((UNICODE_VERSION "14.0.0")) `(("DerivedCoreProperties.txt" ,(origin (method url-fetch) (uri (string-append "https://www.unicode.org/Public/" UNICODE_VERSION "/ucd/DerivedCoreProperties.txt")) (sha256 (base32 "1g77s8g9443dd92f82pbkim7rk51s7xdwa3mxpzb1lcw8ryxvvg3")))) ;; For tests ("ruby" ,ruby-2.7))))))) (define-public libconfuse (package (name "libconfuse") (version "3.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/martinh/libconfuse/" "releases/download/v" version "/confuse-" version ".tar.xz")) (sha256 (base32 "043hqqykpprgrkw9s2hbdlxr308a7yxwsgxj4m8aadg1401hmm8x")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-static"))) (home-page "https://github.com/martinh/libconfuse") (synopsis "Configuration file parser library") (description "libconfuse is a configuration file parser library. It supports sections and (lists of) values (strings, integers, floats, booleans or other sections), as well as some other features (such as single/double-quoted strings, environment variable expansion, functions and nested include statements).") (license license:isc))) (define-public libgtextutils (package (name "libgtextutils") (version "0.7") (source (origin (method url-fetch) (uri (string-append "https://github.com/agordon/libgtextutils/releases/download/" version "/libgtextutils-" version ".tar.gz")) (sha256 (base32 "0jiybkb2z58wa2msvllnphr4js2hvjvh988pavb3mzkgr6ihwbkr")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (replace 'bootstrap (lambda _ (invoke "sh" "reconf"))) (add-after 'set-paths 'hide-default-gcc (lambda* (#:key inputs #:allow-other-keys) (let ((gcc (assoc-ref inputs "gcc"))) ;; Remove the default GCC from CPLUS_INCLUDE_PATH to prevent ;; conflicts with the GCC 5 input. (setenv "CPLUS_INCLUDE_PATH" (string-join (delete (string-append gcc "/include/c++") (string-split (getenv "CPLUS_INCLUDE_PATH") #\:)) ":")) #t)))))) (native-inputs `(("autoconf" ,autoconf) ("automake" ,automake) ("gcc@5" ,gcc-5) ; doesn't build with later versions ("libtool" ,libtool))) (home-page "https://github.com/agordon/libgtextutils") (synopsis "Gordon's text utils library") (description "libgtextutils is a text utilities library used by the fastx toolkit from the Hannon Lab.") (license license:agpl3+))) (define-public cityhash (let ((commit "8af9b8c")) (package (name "cityhash") (version (string-append "1.1-2." commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/google/cityhash") (commit commit))) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "0n6skf5dv8yfl1ckax8dqhvsbslkwc9158zf2ims0xqdvzsahbi6")))) (build-system gnu-build-system) (arguments '(#:make-flags (list "CXXFLAGS=-g -O3") #:phases (modify-phases %standard-phases ;; citycrc is not installed by default but is used by some ;; programs. (add-after 'install 'install-citycrc (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (include (string-append out "/include"))) (install-file "src/citycrc.h" include)) #t))))) (home-page "https://github.com/google/cityhash") (synopsis "C++ hash functions for strings") (description "CityHash provides hash functions for strings. The functions mix the input bits thoroughly but are not suitable for cryptography.") (license license:expat)))) (define-public ustr (package (name "ustr") (version "1.0.4") (source (origin (method url-fetch) (uri (string-append "http://www.and.org/ustr/" version "/ustr-" version ".tar.bz2")) (sha256 (base32 "1i623ygdj7rkizj7985q9d6vj5amwg686aqb5j3ixpkqkyp6xbrx")) (patches (search-patches "ustr-fix-build-with-gcc-5.patch")))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "CC=" ,(cc-for-target)) "HIDE=" ;; Override "/sbin/ldconfig" with "echo" because we don't need ;; "ldconfig". "LDCONFIG=echo" (string-append "prefix=" (assoc-ref %outputs "out")) "all-shared") #:phases (modify-phases %standard-phases (add-after 'unpack 'fix-cross-compilation ;; The Makefile contains more insults than cross-compilation support. ;; It poorly reinvents autotools by compiling C programmes with $CC, ;; then tries to run them during the build. Hard-code the results. (lambda _ (substitute* "Makefile" (("\\./autoconf_64b") ,(if (target-64bit? (or (%current-target-system) (%current-system))) "echo 1" "echo 0")) (("\\./autoconf_vsnprintf") "echo 0")))) (add-after 'unpack 'omit-static-libraries ;; These are needed to build & test ustr, but don't install them. (lambda _ (substitute* "Makefile" ((".*install.*LIB_STATIC.*") "")))) (add-after 'unpack 'disable-check-for-stdint (lambda _ ;; Of course we have stdint.h, just not in /usr/include (substitute* '("Makefile" "ustr-import.in") (("-f \"/usr/include/stdint.h\"") "-z \"\"")) #t)) ;; No configure script (delete 'configure)))) (home-page "http://www.and.org/ustr/") (synopsis "String library with very low memory overhead") (description "Ustr is a string library for C with very low memory overhead.") ;; Quoted from the home page: "The License for the code is MIT, new-BSD, ;; LGPL, etc. ... if you need another license to help compatibility, just ;; ask for it. It's basically public domain, without all the legal ;; problems for everyone that trying to make something public domain ;; entails." (license license:public-domain))) (define-public ascii2binary (package (name "ascii2binary") (version "2.14") (source (origin (method url-fetch) (uri (string-append "http://billposer.org/Software/Downloads/" "ascii2binary-" version ".tar.bz2")) (sha256 (base32 "0dc9fxcdmppbs9s06jvq61zbk552laxps0xyk098gj41697ihd96")))) (build-system gnu-build-system) (native-inputs (list gettext-minimal autoconf automake)) (arguments (list #:phases #~(modify-phases %standard-phases ;; AC_FUNC_MALLOC and AC_FUNC_REALLOC usually unneeded ;; see https://lists.gnu.org/archive/html/autoconf/2003-02/msg00017.html (add-after 'unpack 'fix-rpl_malloc (lambda _ (substitute* "configure.ac" (("AC_FUNC_MALLOC") "") (("AC_FUNC_REALLOC") "")) ;; let bootstrap phase run. (delete-file "./configure")))))) (home-page "https://billposer.org/Software/a2b.html") (synopsis "Convert between ASCII, hexadecimal and binary representations") (description "The two programs are useful for generating test data, for inspecting binary files, and for interfacing programs that generate textual output to programs that require binary input and conversely. They can also be useful when it is desired to reformat numbers. @itemize @item @command{ascii2binary} reads input consisting of ascii or hexadecimal representation numbers separated by whitespace and produces as output the binary equivalents. The type and precision of the binary output is selected using command line flags. @item @command{binary2ascii} reads input consisting of binary numbers and converts them to their ascii or hexadecimal representation. Command line flags specify the type and size of the binary numbers and provide control over the format of the output. Unsigned integers may be written out in binary, octal, decimal, or hexadecimal. Signed integers may be written out only in binary or decimal. Floating point numbers may be written out only decimal, either in standard or scientific notation. (If you want to examine the binary representation of floating point numbers, just treat the input as a sequence of unsigned characters.) @end itemize") (license license:gpl3))) (define-public uniutils (package (name "uniutils") (version "2.28") (source (origin (method url-fetch) (uri (string-append "https://billposer.org/Software/Downloads/" "uniutils-" version ".tar.bz2")) (sha256 (base32 "0z4ibnd2zzya489vl84cfh82bmdwdhf0isf1myqwrs3s9s0vqyyn")))) (build-system gnu-build-system) (arguments (list #:configure-flags #~(list "--disable-dependency-tracking") #:phases #~(modify-phases %standard-phases (add-after 'build 'fix-paths (lambda* (#:key outputs inputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (a2b (assoc-ref inputs "ascii2binary")) (iconv (assoc-ref inputs "libiconv"))) (substitute* "utf8lookup" (("^ascii2binary ") (string-append a2b "/bin/ascii2binary ")) (("^uniname ") (string-append out "/bin/uniname ")) (("^iconv ") (string-append iconv "/bin/iconv "))))))))) (inputs (list ascii2binary libiconv)) (home-page "https://billposer.org/Software/unidesc.html") (synopsis "Find out what is in a Unicode file") (description "Useful tools when working with Unicode files when one doesn't know the writing system, doesn't have the necessary font, needs to inspect invisible characters, needs to find out whether characters have been combined or in what order they occur, or needs statistics on which characters occur. @itemize @item @command{uniname} defaults to printing the character offset of each character, its byte offset, its hex code value, its encoding, the glyph itself, and its name. It may also be used to validate UTF-8 input. @item @command{unidesc} reports the character ranges to which different portions of the text belong. It can also be used to identify Unicode encodings (e.g. UTF-16be) flagged by magic numbers. @item @command{unihist} generates a histogram of the characters in its input. @item @command{ExplicateUTF8} is intended for debugging or for learning about Unicode. It determines and explains the validity of a sequence of bytes as a UTF8 encoding. @item @command{utf8lookup} provides a handy way to look up Unicode characters from the command line. @item @command{unireverse} reverse each line of UTF-8 input character-by-character. @end itemize") (license license:gpl3))) (define-public libconfig (package (name "libconfig") (version "1.7.3") (home-page "https://hyperrealm.github.io/libconfig/") (source (origin (method url-fetch) (uri (string-append home-page "/dist/libconfig-" version ".tar.gz")) (sha256 (base32 "1rqynfxl1zxwk4b42sniz9xlw285aidcrsfih51p8dy0rbb6clal")))) (build-system gnu-build-system) (arguments (list #:phases #~(modify-phases %standard-phases (add-after 'unpack 'update-config-scripts (lambda* (#:key native-inputs inputs #:allow-other-keys) (for-each (lambda (file) (install-file (search-input-file (or native-inputs inputs) (string-append "/bin/" file)) "aux-build")) '("config.guess" "config.sub"))))))) (native-inputs (list config)) (synopsis "C/C++ configuration file library") (description "Libconfig is a simple library for manipulating structured configuration files. This file format is more compact and more readable than XML. And unlike XML, it is type-aware, so it is not necessary to do string parsing in application code.") (license license:lgpl2.1+))) (define-public pfff (package (name "pfff") (version "1.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/pfff/pfff") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1nxkfm7zliq3rmr7yp871sppwfnz71iz364m2sgazny71pzykggc")))) (build-system cmake-build-system) (home-page "https://biit.cs.ut.ee/pfff/") (synopsis "Probabilistic fast file fingerprinting tool") (description "pfff is a tool for calculating a compact digital fingerprint of a file by sampling randomly from the file instead of reading it in full. Consequently, the computation has a flat performance characteristic, correlated with data variation rather than file size. pfff can be as reliable as existing hashing techniques, with provably negligible risk of collisions.") (license license:bsd-3))) (define-public oniguruma (package (name "oniguruma") (version "6.9.5-rev1") (source (origin (method url-fetch) (uri (string-append "https://github.com/kkos/" "oniguruma/releases/download/v" ;; If there is a "-" in the version, convert ;; to underscore for this part of the URI. (string-map (lambda (c) (if (char=? #\- c) #\_ c)) version) "/onig-" version ".tar.gz")) (sha256 (base32 "17m92k1n6bvza6m35fpd5g36zwpwm3hfz3478iwj5bvj2sfq8g6k")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-static"))) (home-page "https://github.com/kkos/oniguruma") (synopsis "Regular expression library") (description "Oniguruma is a regular expressions library. The special characteristic of this library is that different character encoding for every regular expression object can be specified.") (license license:bsd-2))) (define-public antiword (package (name "antiword") (version "0.37") (source (origin (method url-fetch) ;; Development stopped in 2005; as of 2023 the home page 404s. (uri (string-append "https://web.archive.org/web/20200621222738/" "http://www.winfield.demon.nl/linux" "/antiword-" version ".tar.gz")) (sha256 (base32 "1b7mi1l20jhj09kyh0bq14qzz8vdhhyf35gzwsq43mn6rc7h0b4f")) (patches (search-patches "antiword-CVE-2014-8123.patch")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; There are no tests #:make-flags (list "-f" "Makefile.Linux" (string-append "GLOBAL_INSTALL_DIR=" (assoc-ref %outputs "out") "/bin") (string-append "GLOBAL_RESOURCES_DIR=" (assoc-ref %outputs "out") "/share/antiword")) #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key outputs #:allow-other-keys) ;; Ensure that mapping files can be found in the actual package ;; data directory. (substitute* "antiword.h" (("/usr/share/antiword") (string-append (assoc-ref outputs "out") "/share/antiword"))) #t)) (replace 'install (lambda* (#:key make-flags #:allow-other-keys) (apply invoke "make" `("global_install" ,@make-flags))))))) (home-page (string-append "https://web.archive.org/web/20220121050627/" "http://www.winfield.demon.nl")) (synopsis "Microsoft Word document reader") (description "Antiword is an application for displaying Microsoft Word documents. It can also convert the document to PostScript or XML. Only documents made by MS Word version 2 and version 6 or later are supported. The name comes from: \"The antidote against people who send Microsoft Word files to everybody, because they believe that everybody runs Windows and therefore runs Word\".") (license license:gpl2+))) (define-public catdoc (package (name "catdoc") (version "0.95") (source (origin (method url-fetch) (uri (string-append "http://ftp.wagner.pp.ru/pub/catdoc/" "catdoc-" version ".tar.gz")) (patches (search-patches "catdoc-CVE-2017-11110.patch")) (sha256 (base32 "15h7v3bmwfk4z8r78xs5ih6vd0pskn0rj90xghvbzdjj0cc88jji")))) (build-system gnu-build-system) ;; TODO: Also build `wordview` which requires `tk` – make a separate ;; package for this. (arguments '(#:tests? #f ; There are no tests #:configure-flags '("--disable-wordview") #:phases (modify-phases %standard-phases (add-before 'install 'fix-install (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (mkdir-p (string-append out "/share/man/man1")))))))) (home-page "https://www.wagner.pp.ru/~vitus/software/catdoc/") (synopsis "MS-Word to TeX or plain text converter") (description "@command{catdoc} extracts text from MS-Word files, trying to preserve as many special printable characters as possible. It supports everything up to Word-97. Also supported are MS Write documents and RTF files. @command{catdoc} does not preserve complex word formatting, but it can translate some non-ASCII characters into TeX escape codes. It's goal is to extract plain text and allow you to read it and, probably, reformat with TeX, according to TeXnical rules. This package also provides @command{xls2csv}, which extracts data from Excel spreadsheets and outputs it in comma-separated-value format, and @command{catppt}, which extracts data from PowerPoint presentations.") (license license:gpl2+))) (define-public utfcpp (package (name "utfcpp") (version "3.2.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/nemtrif/utfcpp") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (modules '((guix build utils))) ;; Unbundle ftest (snippet '(begin (delete-file-recursively "extern") (substitute* (find-files "tests" "\\.cpp") (("\"../extern/ftest/ftest.h\"") "")))) (sha256 (base32 "195n47dblx765xas54vkgyin3xsvfnvcdc614njzqmcxybfpvix2")))) (build-system cmake-build-system) (native-inputs (list ftest)) (home-page "https://github.com/nemtrif/utfcpp") (synopsis "Portable C++ library for handling UTF-8") (description "UTF8-CPP is a C++ library for handling UTF-8 encoded text in a portable way.") (license license:boost1.0))) (define-public dbacl (package (name "dbacl") (version "1.14.1") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/dbacl/dbacl/" version "/" "dbacl-" version ".tar.gz")) (sha256 (base32 "1gas0112wqjvwn9qg3hxnawk7h3prr0w9b2h68f3p1ifd1kzn3gz")) (patches (search-patches "dbacl-include-locale.h.patch" "dbacl-icheck-multiple-definitions.patch")))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "-I" (assoc-ref %build-inputs "slang") "/include/slang") (string-append "-I" (assoc-ref %build-inputs "ncurses") "/include/ncurses")) #:phases (modify-phases %standard-phases (add-after 'unpack 'delete-sample6-and-japanese (lambda _ (substitute* "doc/Makefile.am" (("sample6.txt") "") (("japanese.txt") "")) (delete-file "doc/sample6.txt") (delete-file "doc/japanese.txt") (substitute* (list "src/tests/Makefile.am" "src/tests/Makefile.in") (("dbacl-jap.shin") "") (("dbacl-jap.sh") "")) #t)) (add-after 'unpack 'delete-test ;; See comments about the license. (lambda _ (delete-file "src/tests/dbacl-jap.shin") #t)) (add-after 'unpack 'fix-test-files (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (substitute* (find-files "src/tests/" "\\.shin$") (("PATH=/bin:/usr/bin") "#PATH=/bin:/usr/bin") (("diff") (string-append (which "diff"))) (("tr") (string-append (which "tr")))) #t))) (replace 'bootstrap (lambda _ (invoke "autoreconf" "-vif") #t))))) (inputs (list ncurses perl readline slang)) (native-inputs (list libtool autoconf automake pkg-config)) (home-page "https://www.lbreyer.com/dbacl.html") (synopsis "Bayesian text and email classifier") (description "dbacl is a fast Bayesian text and email classifier. It builds a variety of language models using maximum entropy (minimum divergence) principles, and these can then be used to categorize input data automatically among multiple categories.") ;; The software is licensed as GPLv3 or later, but ;; includes various sample texts in the doc dir: ;; - sample1.txt, sample3 and sampe5.txt are in the public domain, ;; by Mark Twain. ;; - sample2.txt, sample4.txt are in the public domain, by Aristotle. ;; - sample6.txt is a forwarded email, copyright unknown. ;; Guix does exclude sample6.txt. ;; - japanese.txt is a Japanese unoffical translation of the ;; GNU General Public License, (c) by the Free Software Foundation. ;; Guix excludes this file. (license (list license:gpl3+ license:public-domain)))) (define-public dotconf (package (name "dotconf") (version "1.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/williamh/dotconf") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1sc95hw5k2xagpafny0v35filmcn05k1ds5ghkldfpf6xw4hakp7")))) (build-system gnu-build-system) (arguments `(#:tests? #f)) ; FIXME maketest.sh does not work. (native-inputs (list autoconf automake libtool)) (home-page "https://github.com/williamh/dotconf") (synopsis "Configuration file parser library") (description "C library for creating and parsing configuration files.") (license (list license:lgpl2.1 ; Main distribution. license:asl1.1)))) ; src/readdir.{c,h} (define-public drm-tools (package (name "drm-tools") (version "1.1.33") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/drmtools/drm_tools-" version ".tar.gz")) (sha256 (base32 "187zbxw21zcg8gpyc13gxlycfw0n05a6rmqq6im5wr9zk1v1wj80")))) (build-system cmake-build-system) (arguments `(#:tests? #f ;the test suite fails #:phases (modify-phases %standard-phases (add-after 'unpack 'set-install-prefixes (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out"))) (substitute* "CMakeLists.txt" (("tmp/testinstall") (string-drop out 1)) (("/man/man1") "/share/man/man1")) #t))) (add-after 'unpack 'adjust-test-paths (lambda _ (substitute* '("test_extract_increment.sh" "test_extract_features.sh" "test_extract_features2.sh" "test_dmath.sh") (("\\./extract") "extract") (("\\./dmath") "dmath") (("/usr/local/bin/") "") (("/bin/rm") "rm") (("/bin/cp") "cp")) #t)) (delete 'check) ;; The produced binaries are written directly to %output/bin. (delete 'install) (add-after 'build 'check (lambda* (#:key outputs tests? #:allow-other-keys) (when tests? (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (setenv "PATH" (string-append bin ":" (getenv "PATH"))) (with-directory-excursion (format #f "../drm_tools-~a" ,version) (invoke "sh" "test_all.sh"))))))))) (native-inputs (list which)) ;for tests (inputs (list pcre)) (home-page "https://drmtools.sourceforge.net/") (synopsis "Utilities to manipulate text and binary files") (description "The drm_tools package contains the following commands: @table @command @item accudate An extended version of the \"date\" program that has sub-second accuracy. @item binformat Format complex binary data into text. @item binload Load data into a binary file using simple commands from the input. @item binorder Sort, merge, search, retrieve or generate test data consisting of fixed size binary records. @item binreplace Find or find/replace in binary files. @item binsplit Split test data consisting of fixed size binary records into one or more output streams. @item chardiff Find changes between two files at the character level. Unlike \"diff\", it lists just the characters that differ, so if the 40,000th character is different only that one character will be shown, not the entire line. @item columnadd Add columns of integers, decimals, and/or times. @item datasniffer A utility for formatting binary data dumps. @item dmath Double precision interactive command line math calculator. @item extract Extract and emit data from text files based on character or token position. @item execinput A utility that reads from STDIN and executes each line as a command in a sub-process. @item indexed_text A utility for rapid retrieval of text by line numbers, in any order, from a text file. @item mdump Format binary data. @item msgqueue Create message queues and send/receive messages. @item mbin @itemx mbout Multiple buffer in and out. Used for buffering a lot of data between a slow device and a fast device. Mostly for buffering streaming tape drives for use with slower network connections, so that streaming is maintained as much as possible to minimize wear on the tape device. @item pockmark Corrupt data streams - useful for testing error correction and data recovery. @item tarsieve Filter, list, or split a tar file. @end table") (license license:gpl2+))) (define-public java-rsyntaxtextarea (package (name "java-rsyntaxtextarea") (version "3.4.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/bobbylight/RSyntaxTextArea") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0ad3cmfxwz9963kbh5ryba9jp88hsx03jsl8r4qinwhy6aahx6f3")))) (build-system ant-build-system) (arguments (list #:jar-name "rsyntaxtextarea.jar" #:source-dir "RSyntaxTextArea/src/main/java" #:test-dir "RSyntaxTextArea/src/test" #:tests? #false ;requires junit5 #:phases '(modify-phases %standard-phases (add-before 'build 'copy-resources (lambda _ (copy-recursively "RSyntaxTextArea/src/main/resources" "build/classes"))) #; (add-before 'check 'start-xorg-server (lambda _ ;; The test suite requires a running X server. (system "Xvfb :1 &") (setenv "DISPLAY" ":1") ;; Prevent irrelevant errors that cause test output mismatches: ;; ‘Fontconfig error: No writable cache directories’ (setenv "XDG_CACHE_HOME" (getcwd))))))) (native-inputs (list java-hamcrest-core xorg-server-for-tests)) (home-page "https://bobbylight.github.io/RSyntaxTextArea/") (synopsis "Syntax highlighting text component for Java Swing") (description "RSyntaxTextArea is a syntax highlighting, code folding text component for Java Swing. It extends @code{JTextComponent} so it integrates completely with the standard @code{javax.swing.text} package. It is fast and efficient, and can be used in any application that needs to edit or view source code.") (license license:bsd-3))) (define-public java-autocomplete (package (name "java-autocomplete") (version "3.3.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/bobbylight/AutoComplete") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0ksa3k3xkdjpyq9sbsvchyhfzzpb67pv8xzbpljj8rqilgk8ysy0")))) (build-system ant-build-system) (arguments (list #:tests? #false ;needs junit5 #:jar-name "autocomplete.jar" #:source-dir "AutoComplete/src/main/java" #:test-dir "AutoComplete/src/test" #:phases '(modify-phases %standard-phases (add-before 'build 'copy-resources (lambda _ (copy-recursively "AutoComplete/src/main/resources" "build/classes")))))) (propagated-inputs (list java-rsyntaxtextarea)) (native-inputs (list java-hamcrest-core)) (home-page "https://github.com/bobbylight/AutoComplete") (synopsis "Text completion library") (description "AutoComplete is a library allowing you to add IDE-like auto-completion (aka \"code completion\" or \"Intellisense\") to any Swing JTextComponent. Special integration is added for @code{RSyntaxTextArea}, since this feature is commonly needed when editing source code. Features include: Drop-down completion choice list. Optional companion \"description\" window, complete with full HTML support and navigable with hyperlinks. Optional parameter completion assistance for functions and methods, ala Eclipse and NetBeans. Completion information is typically specified in an XML file, but can even be dynamic.") (license license:bsd-3))) ;; We use the sources from git instead of the tarball from pypi, because the ;; latter does not include the Cython source file from which bycython.cpp is ;; generated. (define-public python-editdistance (let ((commit "3ea84a7dd3258c76aa3be851ef3d50e59c886846") (revision "1")) (package (name "python-editdistance") (version (string-append "0.3.1-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/aflc/editdistance") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "1l43svsv12crvzphrgi6x435z6xg8m086c64armp8wzb4l8ccm7g")))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'build-cython-code (lambda _ (with-directory-excursion "editdistance" (delete-file "bycython.cpp") (invoke "cython" "--cplus" "bycython.pyx"))))))) (native-inputs (list python-cython)) (home-page "https://www.github.com/aflc/editdistance") (synopsis "Fast implementation of the edit distance (Levenshtein distance)") (description "This library simply implements Levenshtein distance algorithm with C++ and Cython.") (license license:expat)))) (define-public txt2tags (package (name "txt2tags") (version "3.9") (source (origin (method url-fetch) (uri (pypi-uri "txt2tags" version)) (sha256 (base32 "0ik7gpr3gymgxnj0p86k8768kyxncbncv93zq67sbak3dbdl8hky")))) (build-system python-build-system) (native-inputs (list python-tox)) (home-page "https://txt2tags.org") (synopsis "Convert between markup languages") (description "txt2tags is a document generator. It reads a text file with minimal markup and converts it to multiple formats.") (license license:gpl2))) (define-public docx2txt (package (name "docx2txt") (version "1.4") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/docx2txt/docx2txt/v" version "/docx2txt-" version ".tgz")) (sha256 (base32 "06vdikjvpj6qdb41d8wzfnyj44jpnknmlgbhbr1w215420lpb5xj")))) (build-system gnu-build-system) (inputs (list unzip perl)) (arguments `(#:tests? #f ; No tests. #:make-flags (list (string-append "BINDIR=" (assoc-ref %outputs "out") "/bin") (string-append "CONFIGDIR=" (assoc-ref %outputs "out") "/etc") ;; Makefile seems to be a bit dumb at guessing. (string-append "INSTALL=install") (string-append "PERL=perl")) #:phases (modify-phases %standard-phases (delete 'configure) (add-after 'install 'fix-install (lambda* (#:key outputs inputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (config (string-append out "/etc/docx2txt.config")) (unzip (assoc-ref inputs "unzip"))) ;; According to INSTALL, the .sh wrapper can be skipped. (delete-file (string-append bin "/docx2txt.sh")) (rename-file (string-append bin "/docx2txt.pl") (string-append bin "/docx2txt")) (substitute* config (("config_unzip => '/usr/bin/unzip',") (string-append "config_unzip => '" unzip "/bin/unzip',"))) ;; Makefile is wrong. (chmod config #o644) #t)))))) (synopsis "Recover text from @file{.docx} files, with good formatting") (description "@command{docx2txt} is a Perl based command line utility to convert Microsoft Office @file{.docx} documents to equivalent text documents. Latest version supports following features during text extraction. @itemize @item Character conversions; currency characters are converted to respective names like Euro. @item Capitalisation of text blocks. @item Center and right justification of text fitting in a line of (configurable) 80 columns. @item Horizontal ruler, line breaks, paragraphs separation, tabs. @item Indicating hyperlinked text along with the hyperlink (configurable). @item Handling (bullet, decimal, letter, roman) lists along with (attempt at) indentation. @end itemize\n") (home-page "https://docx2txt.sourceforge.net") (license license:gpl3+))) (define-public html2text ;; Use commit directly to get the fixes to the installation phase ;; that are not in a release yet. (let ((commit "05364c1028026a87d6f45130a8e86e1ee67704d2") (revision "1")) (package (name "html2text") (version (git-version "2.0.1_pre" revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/grobian/html2text") (commit (string-append commit)))) (file-name (git-file-name name version)) (sha256 (base32 "0n6pl0nijcn4z3p0dvf3gmvvpjq261pagnk84s9f78c4c55bw5cm")))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (replace 'configure ;; The configure script is not from autotools and does not accept ;; ‘--style’ options. There is no proper error handling. (lambda* (#:key outputs #:allow-other-keys) (invoke "./configure" (string-append "CXX=" ,(cxx-for-target)))))))) (home-page "https://github.com/grobian/html2text") (synopsis "HTML to plain text converter") (description "@code{html2text} is a command line utility that converts HTML documents into plain text.") (license (list license:bsd-4 ; cmp_nocase.cpp & sgml.h license:gpl2+))))) ; everything else (define-public odt2txt (package (name "odt2txt") (version "0.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/dstosberg/odt2txt/") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0im3kzvhxkjlx57w6h13mc9584c74ma1dyymgvpq2y61av3gc35v")))) (build-system gnu-build-system) (arguments (list #:tests? #f ; no make check #:make-flags #~(list (string-append "CC=" #$(cc-for-target)) (string-append "DESTDIR=" #$output)) #:phases #~(modify-phases %standard-phases ;; no configure script (delete 'configure)))) (inputs (list zlib)) (home-page "https://github.com/dstosberg/odt2txt/") (synopsis "Converter from OpenDocument Text to plain text") (description "odt2txt is a command-line tool which extracts the text out of OpenDocument Texts, as produced by OpenOffice.org, KOffice, StarOffice and others. odt2txt can also extract text from some file formats similar to OpenDocument Text, such as OpenOffice.org XML (*.sxw), which was used by OpenOffice.org version 1.x and older StarOffice versions. To a lesser extent, odt2txt may be useful to extract content from OpenDocument spreadsheets (*.ods) and OpenDocument presentations (*.odp).") (license license:gpl2))) (define-public bibutils (package (name "bibutils") (version "7.2") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/bibutils/" "bibutils_" version "_src.tgz")) (sha256 (base32 "1hxmwjjzw48w6hdh2x7ybkrhi1xngd55i67hrrd3wswa3vpql0kf")))) (build-system gnu-build-system) (arguments (list #:configure-flags #~(list "--install-dir" (string-append #$output "/bin") "--install-lib" (string-append #$output "/lib") "--dynamic") #:make-flags #~(list (string-append "CC=" #+(cc-for-target)) (string-append "LDFLAGSIN=-Wl,-rpath=" #$output "/lib")) #:test-target "test" #:phases '(modify-phases %standard-phases (replace 'configure (lambda* (#:key configure-flags #:allow-other-keys) ;; configure script is ill-formed, invoke it manually (apply invoke "sh" "./configure" configure-flags)))))) (home-page "https://bibutils.sourceforge.io/") (synopsis "Convert between various bibliography formats") (description "This package provides converters for various bibliography formats (e.g. Bibtex, RIS, ...) using a common XML intermediate.") (license license:gpl2))) (define-public goawk (package (name "goawk") (version "1.29.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/benhoyt/goawk") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "11ha3wzpwl02g921vz5dvhblim7jf5wxd0gi4vn9jppxah1d5kgl")))) (build-system go-build-system) (arguments (list #:install-source? #f #:import-path "github.com/benhoyt/goawk" #:phases #~(modify-phases %standard-phases (add-after 'unpack 'disable-failing-tests (lambda* (#:key tests? import-path #:allow-other-keys) (with-directory-excursion (string-append "src/" import-path) ;; Disable tests trying to setup up locale and requiring gawk ;; executable. (substitute* (find-files "." "\\_test.go$") (("TestShellCommand") "OffTestShellCommand") (("TestInterp") "OffTestInterp") (("TestCommandLine") "OffTestCommandLine"))))) (add-before 'check 'patch-paths (lambda* (#:key tests? import-path #:allow-other-keys) (with-directory-excursion (string-append "src/" import-path) (substitute* (list "interp/interp.go" "goawk_test.go") (("/bin/sh") (which "sh"))) (substitute* "goawk_test.go" ;; During tests goawk tries to write to existing files, ;; point to an empty directory instead. (("/testdata/output") "/testdata/output-tmp"))))) (replace 'check (lambda* (#:key tests? import-path #:allow-other-keys) (when tests? (with-directory-excursion (string-append "src/" import-path) (mkdir "testdata/output-tmp") (invoke "go" "test" "./...") ;; Make sure we have not left any generated articfacts ;; during tests and moved them to the store. (delete-file-recursively "testdata/output-tmp")))))))) (home-page "https://github.com/benhoyt/goawk") (synopsis "AWK interpreter with CSV support") (description "GoAWK is a POSIX-compatible version of AWK that also has a CSV mode for reading and writing CSV and TSV files.") (license license:expat))) (define-public opencc (package (name "opencc") (version "1.1.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/BYVoid/OpenCC") (commit (string-append "ver." version)))) (file-name (git-file-name name version)) (sha256 (base32 "07y0pvxjlmpcnym229j87qcfwnfm7vi10dad0a20xy6as55a9j3d")) (modules '((guix build utils))) (snippet '(begin ;; TODO: Unbundle tclap, darts-clone, gtest (delete-file-recursively "deps/rapidjson-1.1.0") #t)))) (build-system cmake-build-system) (arguments ;; Required to locate the install script properly. `(#:out-of-source? #f #:parallel-build? #f ;occasionally failed. #:imported-modules (,@%cmake-build-system-modules (guix build python-build-system)) #:modules ((guix build cmake-build-system) ((guix build python-build-system) #:prefix python:) (guix build utils)) #:phases (modify-phases %standard-phases (add-after 'unpack 'prevent-rebuild-during-installation (lambda _ (substitute* "python/setup.py" (("'build_py': BuildPyCommand,") "")) #t)) (add-after 'unpack 'patch-3rd-party-references (lambda* (#:key inputs #:allow-other-keys) (let ((rapidjson (assoc-ref inputs "rapidjson"))) (substitute* "src/CMakeLists.txt" (("../deps/rapidjson-1.1.0") (string-append rapidjson "/include/rapidjson"))) #t))) (add-before 'configure 'patch-python-binding-installation (lambda* (#:key outputs inputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* "python/opencc/__init__.py" (("(_libopenccfile =).*$" _ prefix) (format #f "~a os.path.join('~a/lib', _libopenccfilename)~%" prefix out)) (("(_opencc_share_dir =).*$" _ prefix) (format #f "~a '~a/share/opencc'~%" prefix out)))) #t)) (add-after 'install 'install-python-binding (lambda* (#:key outputs inputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (dist (string-append out "/lib/python" ,(version-major+minor (package-version python)) "/site-packages"))) (chdir "python") (mkdir-p dist) (setenv "PYTHONPATH" (string-append dist ":" (getenv "GUIX_PYTHONPATH"))) (invoke "python" "setup.py" "install" "--root=/" "--single-version-externally-managed" (string-append "--prefix=" out)) #t))) (add-before 'install-python-binding 'enable-bytecode-determinism (assoc-ref python:%standard-phases 'enable-bytecode-determinism))))) (native-inputs `(("python" ,python-wrapper) ("rapidjson" ,rapidjson) ("python-setuptools" ,python-setuptools) ("python-wheel" ,python-wheel))) (home-page "https://github.com/BYVoid/OpenCC") (synopsis "Convert between Traditional Chinese and Simplified Chinese") (description "Open Chinese Convert (OpenCC) converts between Traditional Chinese and Simplified Chinese, supporting character-level conversion, phrase-level conversion, variant conversion, and regional idioms among Mainland China, Taiwan, and Hong-Kong.") (license license:asl2.0))) (define-public nkf (let ((commit "08043eadf4abdddcf277842217e3c77a24740dc2") (revision "1")) (package (name "nkf") ;; The commits corresponding to specific versions are published ;; here: ;; https://ja.osdn.net/projects/nkf/scm/git/nkf/ (version "2.1.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/nurse/nkf") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0anw0knr1iy4p9w3d3b3pbwzh1c43p1i2q4c28kw9zviw8kx2rly")))) (build-system gnu-build-system) (arguments (list #:tests? #f ; test for perl module #:make-flags #~(list (string-append "CC=" #$(cc-for-target)) "CFLAGS=-O2 -Wall -pedantic" (string-append "prefix=" #$output) "MKDIR=mkdir -p") #:phases #~(modify-phases %standard-phases (delete 'configure)))) ; No ./configure script (home-page "https://ja.osdn.net/projects/nkf/") (synopsis "Network Kanji Filter") (description "Nkf is yet another kanji code converter among networks, hosts and terminals. It converts input kanji code to designated kanji code such as ISO-2022-JP, Shift_JIS, EUC-JP, UTF-8, UTF-16 or UTF-32.") (license license:zlib)))) (define-public python-pandocfilters (package (name "python-pandocfilters") (version "1.5.0") (source (origin (method url-fetch) (uri (pypi-uri "pandocfilters" version)) (sha256 (base32 "0f3sb8q85dbwliv46cc1yvpy4r00qp4by5x8751kn8vx6c1rarqb")))) (build-system python-build-system) (home-page "https://github.com/jgm/pandocfilters") (synopsis "Python module for writing Pandoc filters") (description "Pandoc is a powerful utility to transform various input formats into a wide range of output formats. To alter the exported output document, Pandoc allows the usage of filters, which are pipes that read a JSON serialization of the Pandoc AST from stdin, transform it in some way, and write it to stdout. It allows therefore to alter the processing of Pandoc's supported input formats, for instance one can add new syntax elements to markdown, etc. This package provides Python bindings.") (license license:bsd-3))) (define-public aha (package (name "aha") (version "0.5.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/theZiz/aha") (commit version))) (sha256 (base32 "1gywad0rvvz3c5balz8cxsnx0562hj2ngzqyr8zsy2mb4pn0lpgv")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure)) #:make-flags (list (string-append "CC=" ,(cc-for-target)) (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:tests? #f)) ; no test suite (home-page "https://github.com/theZiz/aha") (synopsis "Converts terminal escape sequences to HTML") (description "@command{aha} (Ansi Html Adapter) converts ANSI escape sequences of a Unix terminal to HTML code.") (license (list license:lgpl2.0+ license:mpl1.1)))) (define-public vale (package (name "vale") ;; Newer versions requires which is ;; quite a large project to pack. (version "3.4.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/errata-ai/vale") (commit (string-append "v" version)))) (sha256 (base32 "15f8ggh7hpfmfpszl9qkdfz19kds6gg6x5dgcqy0v6jrcsdbgpgp")) (file-name (git-file-name name version)) (modules '((guix build utils))) (snippet #~(begin ;; Module name has been changed upstream. (substitute* (find-files "." "\\.go$") (("github.com/antonmedv/expr") "github.com/expr-lang/expr")))))) (build-system go-build-system) (arguments (list #:install-source? #f #:import-path "github.com/errata-ai/vale/cmd/vale" #:unpack-path "github.com/errata-ai/vale" #:phases #~(modify-phases %standard-phases ;; Disable tests requring network access: Get ;; "https://raw.githubusercontent.com/errata-ai/styles/master/library.json": ;; dial tcp: lookup raw.githubusercontent.com on [::1]:53: ;; read udp [::1]:52621->[::1]:53: read: connection refused. (add-after 'unpack 'disable-failing-tests (lambda* (#:key tests? unpack-path #:allow-other-keys) (with-directory-excursion (string-append "src/" unpack-path) (substitute* (find-files "." "\\_test.go$") (("TestLibrary") "OffTestLibrary") (("TestLocalComplete") "OffTestLocalComplete") (("TestLocalDir") "OffTestLocalDir") (("TestLocalOnlyStyles") "OffTestLocalOnlyStyles") (("TestLocalZip") "OffTestLocalZip") (("TestNoPkgFound") "OffTestNoPkgFound") (("TestV3Pkg") "OffTestV3Pkg"))))) ;; FIXME: Pattern embedded: cannot embed directory embedded: ;; contains no embeddable files. ;; ;; This happens due to Golang can't determine the valid directory of ;; the module which is sourced during setup environment phase, but ;; easy resolved after coping to expected directory "vendor" within ;; the current package, see details in Golang source: ;; ;; - URL: ;; - commit: 82c14346d89ec0eeca114f9ca0e88516b2cda454 ;; - file: src/cmd/go/internal/load/pkg.go#L2059 (add-before 'build 'copy-input-to-vendor-directory (lambda* (#:key unpack-path #:allow-other-keys) (with-directory-excursion (string-append "src/" unpack-path) (mkdir "vendor") (copy-recursively (string-append #$(this-package-native-input "go-github-com-jdkato-twine") "/src/github.com") "vendor/github.com")))) ;; XXX: Workaround for go-build-system's lack of Go modules ;; support. (replace 'check (lambda* (#:key tests? unpack-path #:allow-other-keys) (when tests? (with-directory-excursion (string-append "src/" unpack-path) (setenv "HOME" "/tmp") (invoke "go" "test" "-v" "./..."))))) (add-before 'install 'remove-vendor-directory (lambda* (#:key unpack-path #:allow-other-keys) (with-directory-excursion (string-append "src/" unpack-path) (delete-file-recursively "vendor"))))))) (native-inputs (list go-github-com-masterminds-sprig-v3 go-github-com-adrg-strutil go-github-com-adrg-xdg go-github-com-bmatcuk-doublestar-v4 go-github-com-d5-tengo-v2 go-github-com-errata-ai-ini go-github-com-errata-ai-regexp2 go-github-com-expr-lang-expr go-github-com-gobwas-glob go-github-com-jdkato-twine go-github-com-karrick-godirwalk go-github-com-mholt-archiver-v3 go-github-com-mitchellh-mapstructure go-github-com-niklasfasching-go-org go-github-com-olekukonko-tablewriter go-github-com-otiai10-copy go-github-com-pterm-pterm go-github-com-remeh-sizedwaitgroup go-github-com-spf13-pflag go-github-com-yuin-goldmark go-golang-org-x-exp go-golang-org-x-net go-golang-org-x-sys go-gopkg-in-yaml-v2)) (home-page "https://github.com/errata-ai/vale") (synopsis "Fully customizable syntax-aware linter that focuses on your style") (description "Vale is a fully extensible linter that focuses on your own writing style by making use of rules in individual YAML files. It is syntax-aware on markup languages such as HTML, Markdown, Asciidoc, and reStructuredText. The community around it also has a list of style guides implemented with Vale in @url{https://github.com/errata-ai/styles, their styles repo}.") (license license:expat))) (define-public utf-8-lineseparator (package (name "utf-8-lineseparator") (version "8") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/pflanze/utf-8-lineseparator") (commit (string-append "cj" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0rw34r0aiab55mqks9sjzjyskfwgn7mfhy65px1lljyrs2xvvzp5")))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "CC=" ,(cc-for-target))) #:phases (modify-phases %standard-phases (delete 'configure) (replace 'install (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (install-file "utf-8-lineseparator" bin))))))) (home-page "https://github.com/pflanze/utf-8-lineseparator") (synopsis "Line ending detection library") (description "@code{utf-8-lineseparator} provides a tool to efficiently check text files for valid UTF-8 use and to report which line endings they use.") (license license:expat))) (define-public csvdiff (package (name "csvdiff") (version "1.4.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/aswinkarthik/csvdiff") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0cd1ikxsypjqisfnmr7zix3g7x8p892w77086465chyd39gpk97b")))) (build-system go-build-system) (arguments (list #:install-source? #f #:import-path "github.com/aswinkarthik/csvdiff")) (native-inputs (list go-github-com-cespare-xxhash go-github-com-fatih-color go-github-com-spf13-afero go-github-com-spf13-cobra go-github-com-stretchr-testify)) (home-page "https://github.com/aswinkarthik/csvdiff") (synopsis "Fast diff tool for comparing CSV files") (description "@code{csvdiff} is a diff tool to compute changes between two CSV files. It can compare CSV files with a million records in under 2 seconds. It is specifically suited for comparing CSV files dumped from database tables. GNU Diff is orders of magnitude faster for comparing line by line. @code{csvdiff} supports @itemize @item Selective comparison of fields in a row @item Specifying group of columns as primary-key to uniquely identify a row @item Ignoring columns @item Several output formats including colored git style output or JSON for post-processing @end itemize") (license license:expat))) (define-public miller (package (name "miller") (version "6.12.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/johnkerl/miller") (commit (go-version->git-ref version)))) (file-name (git-file-name name version)) (sha256 (base32 "195lgayq5z7ndag3w495fs618pkrhz426kg0kp3s5sa68vr1madp")))) (build-system go-build-system) (arguments (list #:install-source? #f #:import-path "github.com/johnkerl/miller/cmd/mlr" #:unpack-path "github.com/johnkerl/miller" #:phases #~(modify-phases %standard-phases ;; TODO: Build all provided documentation. (add-after 'install 'install-man-pages (lambda* (#:key unpack-path #:allow-other-keys) (with-directory-excursion (string-append "src/" unpack-path) (invoke "make" (string-append "PREFIX=" #$output) "-C" "man" "install"))))))) (native-inputs (list go-github-com-facette-natsort go-github-com-johnkerl-lumin go-github-com-kballard-go-shellquote go-github-com-klauspost-compress go-github-com-lestrrat-go-strftime go-github-com-mattn-go-isatty ;; Optional, not packed in Guix ;; go-github-com-nine-lives-later-go-windows-terminal-sequences go-github-com-pkg-profile go-github-com-stretchr-testify go-golang-org-x-sys go-golang-org-x-term go-golang-org-x-text python-wrapper python-mkdocs-material ruby)) (home-page "https://miller.readthedocs.io/") (synopsis "Text-formatted data processing tool") (description "Miller (@command{mlr}) is like @command{awk}, @command{sed}, @command{cut}, @command{join}, and @command{sort} for data formats such as CSV, TSV, JSON, JSON Lines, and positionally-indexed. It supports format conversion and pretty-printing.") (license license:bsd-2))) (define-public ack (package (name "ack") (version "3.7.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/beyondgrep/ack3") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0xrbgjj3nys4158nskd0npqf825xlrqa2x3fqcfz0nnxai2jzbck")))) (build-system perl-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'patch-generated-file-shebangs 'patch-more-shebangs (lambda* (#:key inputs outputs #:allow-other-keys) (let ((perl (string-append (assoc-ref inputs "perl") "/bin/perl")) (site-perl (lambda (input) (format #false "~a/lib/perl5/site_perl/~a" input ,(package-version perl))))) (substitute* "t/ack-type.t" (("/usr/bin/perl") perl) (("/usr/bin/env perl") perl)) (substitute* "ack" (("/bin/perl") ;; add @INC include directories to perl calls (string-append "/bin/perl -I " (site-perl (assoc-ref inputs "perl-file-next")) " -I " (site-perl (assoc-ref outputs "out"))))))))))) (inputs (list perl-file-next)) (home-page "https://beyondgrep.com/") (synopsis "Code-searching tool for programmers with large source trees") (description "ack is a tool for finding text inside files. It is designed for hackers and programmers by being fast, ignoring VCS directories, letting a user easily specify file types, match highlighting, Perl-Compatible Regular Expressions, and being faster to type than grep.") (license license:artistic2.0))) (define-public python-panflute (package (name "python-panflute") (version "2.3.0") (source (origin (method url-fetch) (uri (pypi-uri "panflute" version)) (sha256 (base32 "1jk5b2sp1h4drkjrg2ks77d0ca6j043n2myvacm77nfc93y9vzff")))) (build-system python-build-system) (propagated-inputs (list python-click python-pyyaml)) (native-inputs (list python-configparser python-coverage python-flake8 python-pandocfilters python-pytest python-pytest-cov python-requests)) (home-page "http://scorreia.com/software/panflute/") (synopsis "Pythonic Pandoc filters") (description "Panflute is a Python package that makes Pandoc filters fun to write. It is a pythonic alternative to John MacFarlane's pandocfilters, from which it is heavily inspired.") (license license:bsd-3))) (define-public pandoc-include (package (name "pandoc-include") (version "1.2.0") (source (origin (method url-fetch) (uri (pypi-uri "pandoc-include" version)) (sha256 (base32 "01nrbzs85mrd7jcflicsz0bmfnzi6wsy0ii262xl01zsabqd7n91")))) (build-system python-build-system) (propagated-inputs (list python-natsort python-panflute)) (home-page "https://github.com/DCsunset/pandoc-include") (synopsis "Pandoc filter to allow file and header includes") (description "@code{pandoc-include} extends Pandoc to support: @enumerate @item include as raw blocks @item indent and dedent included contents @item partial include @item code include @item Unix style pathname @item recursive include @item Yaml header merging @item header include @end enumerate") (license license:expat)))