unofficial mirror of guix-patches@gnu.org 
 help / color / mirror / code / Atom feed
* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
@ 2021-07-20 11:27 Maxime Devos
  2021-07-20 13:55 ` Ludovic Courtès
  2021-07-20 21:34 ` [bug#49659] [PATCH v2\ core-updates v2] " Maxime Devos
  0 siblings, 2 replies; 11+ messages in thread
From: Maxime Devos @ 2021-07-20 11:27 UTC (permalink / raw)
  To: 49659; +Cc: Maxime Devos

i586-gnu might have the same issue.

* gnu/packages/guile.scm
  (guile-3.0)[arguments]<#:configure-flags>: Add
  "-fexcess-precision=standard" to CFLAGS.
---
 gnu/packages/guile.scm | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/gnu/packages/guile.scm b/gnu/packages/guile.scm
index d78c57e88c..e1f6495837 100644
--- a/gnu/packages/guile.scm
+++ b/gnu/packages/guile.scm
@@ -16,6 +16,7 @@
 ;;; Copyright © 2018 Eric Bavier <bavier@member.fsf.org>
 ;;; Copyright © 2019 Taylan Kammer <taylan.kammer@gmail.com>
 ;;; Copyright © 2020, 2021 Efraim Flashner <efraim@flashner.co.il>
+;;; Copyright © 2021 Maxime Devos <maximedevos@telenet.be>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -316,7 +317,10 @@ without requiring the source code to be rewritten.")
     (arguments
      (substitute-keyword-arguments (package-arguments guile-2.2)
        ((#:configure-flags flags ''())
-        (let ((flags `(cons "--enable-mini-gmp" ,flags)))
+        ;; -fexcess-precision=standard is required when compiling for
+        ;; i686-linux, otherwise "numbers.test" will fail.
+        (let ((flags `(cons* "CFLAGS=-g -O2 -fexcess-precision=standard"
+                              "--enable-mini-gmp" ,flags)))
           ;; XXX: JIT-enabled Guile crashes in obscure ways on GNU/Hurd.
           (if (hurd-target?)
               `(cons "--disable-jit" ,flags)
-- 
2.32.0





^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 11:27 [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux Maxime Devos
@ 2021-07-20 13:55 ` Ludovic Courtès
  2021-07-20 16:55   ` Maxime Devos
  2021-07-20 18:22   ` Efraim Flashner
  2021-07-20 21:34 ` [bug#49659] [PATCH v2\ core-updates v2] " Maxime Devos
  1 sibling, 2 replies; 11+ messages in thread
From: Ludovic Courtès @ 2021-07-20 13:55 UTC (permalink / raw)
  To: Maxime Devos; +Cc: 49659

Hi!

Maxime Devos <maximedevos@telenet.be> skribis:

> i586-gnu might have the same issue.

Please add a “Fixes …” line.

> * gnu/packages/guile.scm
>   (guile-3.0)[arguments]<#:configure-flags>: Add
>   "-fexcess-precision=standard" to CFLAGS.

Nitpick: the first two lines can be joined.  :-)

>       (substitute-keyword-arguments (package-arguments guile-2.2)
>         ((#:configure-flags flags ''())
> -        (let ((flags `(cons "--enable-mini-gmp" ,flags)))
> +        ;; -fexcess-precision=standard is required when compiling for
> +        ;; i686-linux, otherwise "numbers.test" will fail.
> +        (let ((flags `(cons* "CFLAGS=-g -O2 -fexcess-precision=standard"
> +                              "--enable-mini-gmp" ,flags)))

Yay!  Questions:

  1. Should we make it conditional on
       (or (string-prefix? "i686-" %host-type)
           (string-prefix? "i586-" %host-type))
     ?  (I wonder why armhf-linux doesn’t have the same problem.)

  2. Is there any downside to compiling all of libguile with this flag?

  3. Do we have a clear explanation of why ‘-fexcess-precision=fast’
     (the default) would lead to failures in ‘numbers.test’?

I looked at the GCC manual (info "(gcc) Optimize Options") and at links
you provided earlier on IRC, but I can’t really explain how this would
lead those tests to fail: <https://issues.guix.gnu.org/49368>.

I added a ‘printf’ call in ‘scm_i_inexact_floor_divide’, which is where
it all happens:

--8<---------------cut here---------------start------------->8---
static void
scm_i_inexact_floor_divide (double x, double y, SCM *qp, SCM *rp)
{
  if (SCM_UNLIKELY (y == 0))
    scm_num_overflow (s_scm_floor_divide);  /* or return a NaN? */
  else
    {
      double q = floor (x / y);
      double r = x - q * y;
      printf ("%s x=%f y=%f x/y=%f floor(x/y)=%f q=%f r=%f\n", __func__,
	      x, y, x/y, floor (x/y), q, r);
      *qp = scm_i_from_double (q);
      *rp = scm_i_from_double (r);
    }
}
--8<---------------cut here---------------end--------------->8---

I get this:

--8<---------------cut here---------------start------------->8---
scheme@(guile-user)> (euclidean/ 130. (exact->inexact 10/7))
scm_i_inexact_floor_divide x=130.000000 y=1.428571 x/y=91.000000 floor(x/y)=90.000000 q=90.000000 r=1.428571
$1 = 90.0
$2 = 1.4285714285714257
--8<---------------cut here---------------end--------------->8---

So it’s really ‘floor’ that’s messing up somehow.

Perhaps we have to just accept it, use the flag, and be done with it,
but that’s frustrating.

Thoughts?

Ludo’.




^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 13:55 ` Ludovic Courtès
@ 2021-07-20 16:55   ` Maxime Devos
  2021-07-20 20:51     ` Ludovic Courtès
  2021-07-20 18:22   ` Efraim Flashner
  1 sibling, 1 reply; 11+ messages in thread
From: Maxime Devos @ 2021-07-20 16:55 UTC (permalink / raw)
  To: Ludovic Courtès; +Cc: 49659

[-- Attachment #1: Type: text/plain, Size: 6401 bytes --]

Ludovic Courtès schreef op di 20-07-2021 om 15:55 [+0200]:
> Hi!
> 
> Maxime Devos <maximedevos@telenet.be> skribis:
> 
> > i586-gnu might have the same issue.
> 
> Please add a “Fixes …” line.

I didn't find the bug report.

> >       (substitute-keyword-arguments (package-arguments guile-2.2)
> >         ((#:configure-flags flags ''())
> > -        (let ((flags `(cons "--enable-mini-gmp" ,flags)))
> > +        ;; -fexcess-precision=standard is required when compiling for
> > +        ;; i686-linux, otherwise "numbers.test" will fail.
> > +        (let ((flags `(cons* "CFLAGS=-g -O2 -fexcess-precision=standard"
> > +                              "--enable-mini-gmp" ,flags)))
> 
> Yay!  Questions:
> 
>   1. Should we make it conditional on
>        (or (string-prefix? "i686-" %host-type)
>            (string-prefix? "i586-" %host-type))

Rather, (target-x86-32?). target-x86-32? also recognises "i486-linux-gnu"
even though that's not a ‘supported’ cross-target.

>      ?  (I wonder why armhf-linux doesn’t have the same problem.)

AFAIK floats & doubles on arm don't have excess precision.

Floating-point numbers are either 32-bit or 64-bit,
unlike in x86, where the floating-point registers are 80-bit
but (sizeof) double==8 (64 bits).

(I'm ignoring MMX, SSE and the like.)

I don't know any architectures beside x86 which have excess precision.
"-fexcess-precision=standard" should be harmless on architectures
that don't have excess precision.

I'd make it unconditional, but conditional on x86-target? should work
for all ‘supported’ targets in Guix.

>   2. Is there any downside to compiling all of libguile with this flag?

I searched with "git grep -F double" and "git grep -F float".
Floating-point arithmetic doen't seem to be used much outside numbers.c.

There's vm-engine.c, but the results of the calculations are written
to some (stack?) memory (not a register), so the excess precision
would be thrown away anyway, so I don't expect a slow-down.

No code appears to be relying on excess precision.

>   3. Do we have a clear explanation of why ‘-fexcess-precision=fast’
>      (the default) would lead to failures in ‘numbers.test’?

The problem I think is that the rounding choices made in
  scm_i_inexact_floor_divide
must be consistent with those made in
  scm_i_inexact_floor_quotient
and 
  scm_i_inexact_floor_remainder
(There are tests testing whether the results agree.)

"-fexcess-precision=standard" reduces the degrees of freedom GCC has
in choosing when to round, so it is more likely the rounding choices
coincide?  It's only an untested hypothesis though.

FWIW, I think this line:

    /* in scm_i_inexact_floor_remainder */
    return scm_i_from_double (x - y * floor (x / y));

should be (for less fragility in case GCC changes its optimisations and
register allocation / spilling)

    /* in scm_i_inexact_floor_remainder */
    return scm_i_from_double (x - y * (double) floor (x / y));

even then, there's no guarantee the rounding choices for x/y
are the same in scm_i_inexact_floor_divide, scm_i_inexact_floor_remainder
and scm_i_inexact_floor_quotient.

> I looked at the GCC manual (info "(gcc) Optimize Options") and at links
> you provided earlier on IRC, but I can’t really explain how this would
> lead those tests to fail: <https://issues.guix.gnu.org/49368>;.

> I added a ‘printf’ call in ‘scm_i_inexact_floor_divide’, which is where
> it all happens:
> 
> --8<---------------cut here---------------start------------->8---
> static void
> scm_i_inexact_floor_divide (double x, double y, SCM *qp, SCM *rp)
> {
>   if (SCM_UNLIKELY (y == 0))
>     scm_num_overflow (s_scm_floor_divide);  /* or return a NaN? */
>   else
>     {
>       double q = floor (x / y);
>       double r = x - q * y;
>       printf ("%s x=%f y=%f x/y=%f floor(x/y)=%f q=%f r=%f\n", __func__,
> 	      x, y, x/y, floor (x/y), q, r);
>       *qp = scm_i_from_double (q);
>       *rp = scm_i_from_double (r);
>     }
> }
> --8<---------------cut here---------------end--------------->8---
> 
> I get this:
> 
> --8<---------------cut here---------------start------------->8---
> scheme@(guile-user)> (euclidean/ 130. (exact->inexact 10/7))
> scm_i_inexact_floor_divide x=130.000000 y=1.428571 x/y=91.000000 floor(x/y)=90.000000 q=90.000000 r=1.428571
> $1 = 90.0
> $2 = 1.4285714285714257
> --8<---------------cut here---------------end--------------->8---
> 
> So it’s really ‘floor’ that’s messing up somehow.
> 

I dunno if 'floor' is broken.  Let me explain why this output is possible for a
well-implemented 'floor':

I want to note that printf("%f", floor(x/y))
can display 16 different strings:

  GCC can choose to round 'x' and/or 'y' by moving it from a register to stack memory.
  (doesn't apply here I think because SCM values discard the excess precision)

  GCC can choose to round the result of x/y (same reasons)

  GCC can choose to round the result of floor(x/y) (same reasons)

Likewise, printf("%f", x/y) can display 8 different strings, and the rounding
choices may be different from those made for printf("%f", floor(x/y)).

So this inconsistency (x/y=91.00... > 90.00 = floor(x/y))  doesn't really
surprise me.  A more concrete scenario: suppose the CPU is configured to round
upwards, and 'floor' is a mapping between extended-precision floating-point numbers.

Let 'x' and 'y' be two floating-point numbers, such that:

 (1) the mathematical value of 'x/y' is slightly less than 91
 (2) 'x/y' when calculated in extended precision is slightly less than 91.
     Denote this approximation as F1.
 (3) 'x/y' when calculated in double precision is 91 (or slightly larger)
     (due to the ‘rounding upwards’ mode, in ‘rounding downwards’ it might
      have been slightly less than 91 as in (2))
     Denote this approximation as F2.

Then [floor(x/y)=] floor(F1)=floor(90.999...)=90.0,
and  [x/y=] F2=91.0, thus we seemingly have x/y >= 1 + floor(x/y),
even though that's mathematically nonsense.

Thus, by choosing when to round (in-)appropriately, it is possible (on x86)
that printf("x/y=%f, floor(x/y)=%f",x/y,floor(x/y)) will output "x/y=91.0 floor(x/y)=90.0".

(Please tell if I made an error somewhere.)

Greetings,
Maxime

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 13:55 ` Ludovic Courtès
  2021-07-20 16:55   ` Maxime Devos
@ 2021-07-20 18:22   ` Efraim Flashner
  1 sibling, 0 replies; 11+ messages in thread
From: Efraim Flashner @ 2021-07-20 18:22 UTC (permalink / raw)
  To: Ludovic Courtès; +Cc: 49659, Maxime Devos

[-- Attachment #1: Type: text/plain, Size: 1445 bytes --]

On Tue, Jul 20, 2021 at 03:55:49PM +0200, Ludovic Courtès wrote:
> Hi!
> 
> Maxime Devos <maximedevos@telenet.be> skribis:
> 
> > i586-gnu might have the same issue.
> 
> Please add a “Fixes …” line.
> 
> > * gnu/packages/guile.scm
> >   (guile-3.0)[arguments]<#:configure-flags>: Add
> >   "-fexcess-precision=standard" to CFLAGS.
> 
> Nitpick: the first two lines can be joined.  :-)
> 
> >       (substitute-keyword-arguments (package-arguments guile-2.2)
> >         ((#:configure-flags flags ''())
> > -        (let ((flags `(cons "--enable-mini-gmp" ,flags)))
> > +        ;; -fexcess-precision=standard is required when compiling for
> > +        ;; i686-linux, otherwise "numbers.test" will fail.
> > +        (let ((flags `(cons* "CFLAGS=-g -O2 -fexcess-precision=standard"
> > +                              "--enable-mini-gmp" ,flags)))
> 
> Yay!  Questions:
> 
>   1. Should we make it conditional on
>        (or (string-prefix? "i686-" %host-type)
>            (string-prefix? "i586-" %host-type))
>      ?  (I wonder why armhf-linux doesn’t have the same problem.)
> 
> Thoughts?
> 
> Ludo’.
> 

I'd also like to mention that this bug doesn't show up on 32-bit powerpc.

-- 
Efraim Flashner   <efraim@flashner.co.il>   אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 16:55   ` Maxime Devos
@ 2021-07-20 20:51     ` Ludovic Courtès
  0 siblings, 0 replies; 11+ messages in thread
From: Ludovic Courtès @ 2021-07-20 20:51 UTC (permalink / raw)
  To: Maxime Devos; +Cc: 49659

Maxime Devos <maximedevos@telenet.be> skribis:

> Ludovic Courtès schreef op di 20-07-2021 om 15:55 [+0200]:

[...]

>>   1. Should we make it conditional on
>>        (or (string-prefix? "i686-" %host-type)
>>            (string-prefix? "i586-" %host-type))
>
> Rather, (target-x86-32?). target-x86-32? also recognises "i486-linux-gnu"
> even though that's not a ‘supported’ cross-target.

Yes, makes sense.

>>      ?  (I wonder why armhf-linux doesn’t have the same problem.)
>
> AFAIK floats & doubles on arm don't have excess precision.
>
> Floating-point numbers are either 32-bit or 64-bit,
> unlike in x86, where the floating-point registers are 80-bit
> but (sizeof) double==8 (64 bits).
>
> (I'm ignoring MMX, SSE and the like.)
>
> I don't know any architectures beside x86 which have excess precision.
> "-fexcess-precision=standard" should be harmless on architectures
> that don't have excess precision.
>
> I'd make it unconditional, but conditional on x86-target? should work
> for all ‘supported’ targets in Guix.

Alright.

I’d still err on the side of making the change only for target-x86-32?,
because that’s the only case where we know it’s needed.

>>   2. Is there any downside to compiling all of libguile with this flag?
>
> I searched with "git grep -F double" and "git grep -F float".
> Floating-point arithmetic doen't seem to be used much outside numbers.c.
>
> There's vm-engine.c, but the results of the calculations are written
> to some (stack?) memory (not a register), so the excess precision
> would be thrown away anyway, so I don't expect a slow-down.
>
> No code appears to be relying on excess precision.

OK.

>>   3. Do we have a clear explanation of why ‘-fexcess-precision=fast’
>>      (the default) would lead to failures in ‘numbers.test’?
>
> The problem I think is that the rounding choices made in
>   scm_i_inexact_floor_divide
> must be consistent with those made in
>   scm_i_inexact_floor_quotient
> and 
>   scm_i_inexact_floor_remainder
> (There are tests testing whether the results agree.)
>
> "-fexcess-precision=standard" reduces the degrees of freedom GCC has
> in choosing when to round, so it is more likely the rounding choices
> coincide?  It's only an untested hypothesis though.
>
> FWIW, I think this line:
>
>     /* in scm_i_inexact_floor_remainder */
>     return scm_i_from_double (x - y * floor (x / y));
>
> should be (for less fragility in case GCC changes its optimisations and
> register allocation / spilling)
>
>     /* in scm_i_inexact_floor_remainder */
>     return scm_i_from_double (x - y * (double) floor (x / y));
>
> even then, there's no guarantee the rounding choices for x/y
> are the same in scm_i_inexact_floor_divide, scm_i_inexact_floor_remainder
> and scm_i_inexact_floor_quotient.

Makes sense.  Seems to me that this should simply be implemented
differently to avoid the inconsistency in the first place (or one could
ignore IA32 altogether…).

> I dunno if 'floor' is broken.  Let me explain why this output is possible for a
> well-implemented 'floor':
>
> I want to note that printf("%f", floor(x/y))
> can display 16 different strings:
>
>   GCC can choose to round 'x' and/or 'y' by moving it from a register to stack memory.
>   (doesn't apply here I think because SCM values discard the excess precision)
>
>   GCC can choose to round the result of x/y (same reasons)
>
>   GCC can choose to round the result of floor(x/y) (same reasons)
>
> Likewise, printf("%f", x/y) can display 8 different strings, and the rounding
> choices may be different from those made for printf("%f", floor(x/y)).
>
> So this inconsistency (x/y=91.00... > 90.00 = floor(x/y))  doesn't really
> surprise me.  A more concrete scenario: suppose the CPU is configured to round
> upwards, and 'floor' is a mapping between extended-precision floating-point numbers.
>
> Let 'x' and 'y' be two floating-point numbers, such that:
>
>  (1) the mathematical value of 'x/y' is slightly less than 91
>  (2) 'x/y' when calculated in extended precision is slightly less than 91.
>      Denote this approximation as F1.
>  (3) 'x/y' when calculated in double precision is 91 (or slightly larger)
>      (due to the ‘rounding upwards’ mode, in ‘rounding downwards’ it might
>       have been slightly less than 91 as in (2))
>      Denote this approximation as F2.
>
> Then [floor(x/y)=] floor(F1)=floor(90.999...)=90.0,
> and  [x/y=] F2=91.0, thus we seemingly have x/y >= 1 + floor(x/y),
> even though that's mathematically nonsense.
>
> Thus, by choosing when to round (in-)appropriately, it is possible (on x86)
> that printf("x/y=%f, floor(x/y)=%f",x/y,floor(x/y)) will output "x/y=91.0 floor(x/y)=90.0".

I’m no expert but that makes sense to me.

Could you send an updated patch?

If you think of a way to fix the issue in Guile itself, we can also do
that.  :-)

Thanks for the investigation & explanation!

Ludo’.




^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH v2\ core-updates v2] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 11:27 [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux Maxime Devos
  2021-07-20 13:55 ` Ludovic Courtès
@ 2021-07-20 21:34 ` Maxime Devos
  2021-07-21 13:49   ` bug#49659: [PATCH core-updates] " Ludovic Courtès
  1 sibling, 1 reply; 11+ messages in thread
From: Maxime Devos @ 2021-07-20 21:34 UTC (permalink / raw)
  To: 49659; +Cc: ludo, Maxime Devos

i586-gnu might have the same issue.

* gnu/packages/guile.scm (guile-3.0)[arguments]<#:configure-flags>:
  Add "-fexcess-precision=standard" to CFLAGS when
  (target-x86-32?) is true.

Fixes: <https://issues.guix.gnu.org/49368>.
---
 gnu/packages/guile.scm | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/gnu/packages/guile.scm b/gnu/packages/guile.scm
index d78c57e88c..86621e4ca0 100644
--- a/gnu/packages/guile.scm
+++ b/gnu/packages/guile.scm
@@ -16,6 +16,7 @@
 ;;; Copyright © 2018 Eric Bavier <bavier@member.fsf.org>
 ;;; Copyright © 2019 Taylan Kammer <taylan.kammer@gmail.com>
 ;;; Copyright © 2020, 2021 Efraim Flashner <efraim@flashner.co.il>
+;;; Copyright © 2021 Maxime Devos <maximedevos@telenet.be>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -316,11 +317,19 @@ without requiring the source code to be rewritten.")
     (arguments
      (substitute-keyword-arguments (package-arguments guile-2.2)
        ((#:configure-flags flags ''())
-        (let ((flags `(cons "--enable-mini-gmp" ,flags)))
-          ;; XXX: JIT-enabled Guile crashes in obscure ways on GNU/Hurd.
-          (if (hurd-target?)
-              `(cons "--disable-jit" ,flags)
-              flags)))
+        ;; XXX: JIT-enabled Guile crashes in obscure ways on GNU/Hurd.
+        `(cons* ,@(if (hurd-target?)
+                      '("--disable-jit")
+                      '())
+                ;; -fexcess-precision=standard is required when compiling for
+                ;; i686-linux, otherwise "numbers.test" will fail
+                ;; (see <https://issues.guix.gnu.org/49368> and
+                ;; <https://issues.guix.gnu.org/49659>).
+                ,@(if (target-x86-32?)
+                      '("CFLAGS=-g -O2 -fexcess-precision=standard")
+                      '())
+                "--enable-mini-gmp"
+                ,flags))
        ((#:phases phases)
         `(modify-phases ,phases
            (add-before 'check 'disable-stack-overflow-test
-- 
2.32.0





^ permalink raw reply related	[flat|nested] 11+ messages in thread

* bug#49659: [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-20 21:34 ` [bug#49659] [PATCH v2\ core-updates v2] " Maxime Devos
@ 2021-07-21 13:49   ` Ludovic Courtès
  2021-07-21 14:50     ` [bug#49659] " Mathieu Othacehe
  0 siblings, 1 reply; 11+ messages in thread
From: Ludovic Courtès @ 2021-07-21 13:49 UTC (permalink / raw)
  To: Maxime Devos; +Cc: 49659-done

Hi,

Maxime Devos <maximedevos@telenet.be> skribis:

> i586-gnu might have the same issue.
>
> * gnu/packages/guile.scm (guile-3.0)[arguments]<#:configure-flags>:
>   Add "-fexcess-precision=standard" to CFLAGS when
>   (target-x86-32?) is true.
>
> Fixes: <https://issues.guix.gnu.org/49368>.

I tweaked the commit log and pushed as
fccc0275091af10a46471c68df525d19f446af9e.

Looks like we should be able to move forward with this branch now,
thank you!

Ludo’.




^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-21 13:49   ` bug#49659: [PATCH core-updates] " Ludovic Courtès
@ 2021-07-21 14:50     ` Mathieu Othacehe
  2021-07-23  9:07       ` Ludovic Courtès
  0 siblings, 1 reply; 11+ messages in thread
From: Mathieu Othacehe @ 2021-07-21 14:50 UTC (permalink / raw)
  To: 49659; +Cc: ludo, maximedevos


Hey,

> I tweaked the commit log and pushed as
> fccc0275091af10a46471c68df525d19f446af9e.
>
> Looks like we should be able to move forward with this branch now,
> thank you!

Thanks for taking care of that Maxime & Ludo :). Should we create a
core-updates-frozen branch that Cuirass would build for the "all"
subset? I can take care of that if so.

Mathieu




^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-21 14:50     ` [bug#49659] " Mathieu Othacehe
@ 2021-07-23  9:07       ` Ludovic Courtès
  2021-07-23  9:27         ` Maxime Devos
  2021-07-25 23:52         ` Thiago Jung Bauermann via Guix-patches via
  0 siblings, 2 replies; 11+ messages in thread
From: Ludovic Courtès @ 2021-07-23  9:07 UTC (permalink / raw)
  To: Mathieu Othacehe; +Cc: maximedevos, 49659

Hi,

Mathieu Othacehe <othacehe@gnu.org> skribis:

>> I tweaked the commit log and pushed as
>> fccc0275091af10a46471c68df525d19f446af9e.
>>
>> Looks like we should be able to move forward with this branch now,
>> thank you!
>
> Thanks for taking care of that Maxime & Ludo :). Should we create a
> core-updates-frozen branch that Cuirass would build for the "all"
> subset? I can take care of that if so.

There are “two last things” to check IMO:

  1. Make sure powerpc64le-linux is in a good state.  Can we get it
     built? (We discussed adding a worker on the OSUOSL machine but I
     think we eventually dropped the ball.)

  2. <https://issues.guix.gnu.org/49597> will trigger rebuilds.  I was
     waiting before applying it so we get several people looking into
     it; Maxime had valid criticism, I’m interested in hearing from
     others too.  :-)

Once we’re OK on these two fronts, let’s branch ‘core-updates-frozen’
and unleash our package-fixing superpowers!

Ludo’.




^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-23  9:07       ` Ludovic Courtès
@ 2021-07-23  9:27         ` Maxime Devos
  2021-07-25 23:52         ` Thiago Jung Bauermann via Guix-patches via
  1 sibling, 0 replies; 11+ messages in thread
From: Maxime Devos @ 2021-07-23  9:27 UTC (permalink / raw)
  To: Ludovic Courtès, Mathieu Othacehe; +Cc: 49659

[-- Attachment #1: Type: text/plain, Size: 747 bytes --]

Ludovic Courtès schreef op vr 23-07-2021 om 11:07 [+0200]:
> Hi,
> 
> Mathieu Othacehe <othacehe@gnu.org> skribis:
> 
> > > I tweaked the commit log and pushed as
> > > fccc0275091af10a46471c68df525d19f446af9e.
> > > 
> > > Looks like we should be able to move forward with this branch now,
> > > thank you!
> > 
> > Thanks for taking care of that Maxime & Ludo :). Should we create a
> > core-updates-frozen branch that Cuirass would build for the "all"
> > subset? I can take care of that if so.
> 
> There are “two last things” to check IMO: [...]

For --target=x86_64-w64-mingw32, the patch
<https://issues.guix.gnu.org/49694> is required,
to fix a build failure of x86_64-w64-mingw32-binutils.

Greetings,
Maxime.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 260 bytes --]

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux.
  2021-07-23  9:07       ` Ludovic Courtès
  2021-07-23  9:27         ` Maxime Devos
@ 2021-07-25 23:52         ` Thiago Jung Bauermann via Guix-patches via
  1 sibling, 0 replies; 11+ messages in thread
From: Thiago Jung Bauermann via Guix-patches via @ 2021-07-25 23:52 UTC (permalink / raw)
  To: othacehe, 49659; +Cc: ludo, maximedevos

Hello,

Em sexta-feira, 23 de julho de 2021, às 06:07:45 -03, Ludovic Courtès 
escreveu:
> Hi,
> 
> Mathieu Othacehe <othacehe@gnu.org> skribis:
> >> I tweaked the commit log and pushed as
> >> fccc0275091af10a46471c68df525d19f446af9e.
> >> 
> >> Looks like we should be able to move forward with this branch now,
> >> thank you!
> > 
> > Thanks for taking care of that Maxime & Ludo :). Should we create a
> > core-updates-frozen branch that Cuirass would build for the "all"
> > subset? I can take care of that if so.
> 
> There are “two last things” to check IMO:
> 
>   1. Make sure powerpc64le-linux is in a good state.  Can we get it
>      built? (We discussed adding a worker on the OSUOSL machine but I
>      think we eventually dropped the ball.)
> 
>   2. <https://issues.guix.gnu.org/49597> will trigger rebuilds.  I was
>      waiting before applying it so we get several people looking into
>      it; Maxime had valid criticism, I’m interested in hearing from
>      others too.  :-)
> 
> Once we’re OK on these two fronts, let’s branch ‘core-updates-frozen’
> and unleash our package-fixing superpowers!

Perhaps libdrm and Mesa could be updated before the freeze as suggested by 
John Kehayias¹?

Or could/should that be done on a branch apart from core-updates? Not sure 
if that’s what Ricardo’s suggestion about creating a new branch means.

-- 
Thanks,
Thiago

¹ https://lists.gnu.org/archive/html/guix-devel/2021-07/msg00105.html







^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-07-25 23:53 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-20 11:27 [bug#49659] [PATCH core-updates] gnu: guile: Fix failing tests on i686-linux Maxime Devos
2021-07-20 13:55 ` Ludovic Courtès
2021-07-20 16:55   ` Maxime Devos
2021-07-20 20:51     ` Ludovic Courtès
2021-07-20 18:22   ` Efraim Flashner
2021-07-20 21:34 ` [bug#49659] [PATCH v2\ core-updates v2] " Maxime Devos
2021-07-21 13:49   ` bug#49659: [PATCH core-updates] " Ludovic Courtès
2021-07-21 14:50     ` [bug#49659] " Mathieu Othacehe
2021-07-23  9:07       ` Ludovic Courtès
2021-07-23  9:27         ` Maxime Devos
2021-07-25 23:52         ` Thiago Jung Bauermann via Guix-patches via

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/guix.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).