;;; GNU Guix --- Functional package management for GNU ;;; Copyright © 2013, 2014 Andreas Enge ;;; Copyright © 2014, 2015, 2016 Mark H Weaver ;;; Copyright © 2014 Eric Bavier ;;; Copyright © 2014, 2015, 2016 Alex Kost ;;; Copyright © 2013, 2015, 2017, 2018, 2019, 2021 Ludovic Courtès ;;; Copyright © 2015, 2016 Mathieu Lirzin ;;; Copyright © 2015 Alexander I.Grafov ;;; Copyright © 2015 Andy Wingo ;;; Copyright © 2015 xd1le ;;; Copyright © 2015 Florian Paul Schmidt ;;; Copyright © 2016 Christine Lemmer-Webber ;;; Copyright © 2016, 2018 Ricardo Wurmus ;;; Copyright © 2016, 2017, 2018, 2019, 2020, 2021 Efraim Flashner ;;; Copyright © 2016 Leo Famulari ;;; Copyright © 2016, 2017, 2019, 2020 Marius Bakke ;;; Copyright © 2016 Petter ;;; Copyright © 2017 Mekeor Melire ;;; Copyright © 2017 Nikita ;;; Copyright © 2017–2021 Tobias Geerinckx-Rice ;;; Copyright © 2017 Marek Benc ;;; Copyright © 2017 Mike Gerwitz ;;; Copyright © 2018 Thomas Sigurdsen ;;; Copyright © 2018, 2019 Rutger Helling ;;; Copyright © 2018, 2019 Pierre Neidhardt ;;; Copyright © 2018 Nam Nguyen ;;; Copyright © 2019 Wiktor Żelazny ;;; Copyright © 2019 Kyle Andrews ;;; Copyright © 2019, 2020 Josh Holland ;;; Copyright © 2019, 2021 Tanguy Le Carrour ;;; Copyright © 2020, 2021 Guillaume Le Vaillant ;;; Copyright © 2020 David Wilson ;;; Copyright © 2020 Ivan Vilata i Balaguer ;;; Copyright © 2020, 2021 Brice Waegeneire ;;; Copyright © 2020 Damien Cassou ;;; Copyright © 2020 John Soo ;;; Copyright © 2020 Boris A. Dekshteyn ;;; Copyright © 2020 Alex McGrath ;;; Copyright © 2020 Ivan Kozlov ;;; Copyright © 2020 Brett Gilio ;;; Copyright © 2020 Gabriel Arazas ;;; Copyright © 2020 James Smith ;;; Copyright © 2020 B. Wilson ;;; Copyright © 2020, 2021 Zheng Junjie <873216071@qq.com> ;;; Copyright © 2021 Maxim Cournoyer ;;; Copyright © 2021, 2022 Nicolas Goaziou ;;; Copyright © 2021 Xinglu Chen ;;; Copyright © 2021 Renzo Poddighe ;;; Copyright © 2021 Paul A. Patience ;;; Copyright © 2021 Niklas Eklund ;;; Copyright © 2021 Nikita Domnitskii ;;; Copyright © 2021 ikasero ;;; Copyright © 2021 Felix Gruber ;;; Copyright © 2021 jgart ;;; Copyright © 2022 John Kehayias ;;; Copyright © 2022 Jai Vetrivelan ;;; Copyright © 2022 Andrew Tropin ;;; ;;; This file is part of GNU Guix. ;;; ;;; GNU Guix is free software; you can redistribute it and/or modify it ;;; under the terms of the GNU General Public License as published by ;;; the Free Software Foundation; either version 3 of the License, or (at ;;; your option) any later version. ;;; ;;; GNU Guix is distributed in the hope that it will be useful, but ;;; WITHOUT ANY WARRANTY; without even the implied warranty of ;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;;; GNU General Public License for more details. ;;; ;;; You should have received a copy of the GNU General Public License ;;; along with GNU Guix. If not, see . (define-module (gnu packages xdisorg) #:use-module (guix build-system cmake) #:use-module (guix build-system copy) #:use-module (guix build-system glib-or-gtk) #:use-module (guix build-system gnu) #:use-module (guix build-system meson) #:use-module (guix build-system python) #:use-module (guix build-system scons) #:use-module (guix download) #:use-module (guix gexp) #:use-module (guix git-download) #:use-module (guix hg-download) #:use-module ((guix licenses) #:prefix license:) #:use-module (guix packages) #:use-module (guix utils) #:use-module (gnu packages admin) #:use-module (gnu packages algebra) #:use-module (gnu packages autotools) #:use-module (gnu packages base) #:use-module (gnu packages bash) #:use-module (gnu packages bison) #:use-module (gnu packages check) #:use-module (gnu packages compression) #:use-module (gnu packages documentation) #:use-module (gnu packages flex) #:use-module (gnu packages fontutils) #:use-module (gnu packages freedesktop) #:use-module (gnu packages gawk) #:use-module (gnu packages gettext) #:use-module (gnu packages gl) #:use-module (gnu packages gl) #:use-module (gnu packages glib) #:use-module (gnu packages gnome) #:use-module (gnu packages gtk) #:use-module (gnu packages guile) #:use-module (gnu packages haskell-xyz) #:use-module (gnu packages icu4c) #:use-module (gnu packages image) #:use-module (gnu packages libbsd) #:use-module (gnu packages libevent) #:use-module (gnu packages linux) #:use-module (gnu packages m4) #:use-module (gnu packages man) #:use-module (gnu packages maths) #:use-module (gnu packages ncurses) #:use-module (gnu packages perl) #:use-module (gnu packages pkg-config) #:use-module (gnu packages python) #:use-module (gnu packages python-xyz) #:use-module (gnu packages qt) #:use-module (gnu packages sphinx) #:use-module (gnu packages tcl) #:use-module (gnu packages terminals) #:use-module (gnu packages xml) #:use-module (gnu packages xorg) #:use-module (gnu packages) #:use-module (ice-9 match)) ;; packages outside the x.org system proper (define-public xtitle (package (name "xtitle") (version "0.4.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/baskerville/xtitle") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0f5070k2bwarghl1vq886pl52xck1x5p7x3qhlfchsc2y3dcqms9")))) (build-system gnu-build-system) (inputs (list libxcb xcb-util xcb-util-wm)) (arguments `(#:tests? #f ;no test suite #:make-flags (list (string-append "CC=" ,(cc-for-target)) (string-append "PREFIX=" %output)) #:phases (modify-phases %standard-phases (delete 'configure)))) (home-page "https://github.com/baskerville/xtitle") (synopsis "Output X window titles") (description "If arguments are given, @code{xtitle} outputs the title of each specified window, otherwise it outputs the title of the active window. With @emph{snoop} mode on, it continuously monitors the specified windows and outputs when titles change.") (license license:unlicense))) (define-public arandr (package (name "arandr") (version "0.1.10") (source (origin (method url-fetch) (uri (string-append "https://christian.amsuess.com/tools/arandr" "/files/arandr-" version ".tar.gz")) (sha256 (base32 "135q0llvm077jil2fr92ssw3p095m4r8jfj0lc5rr3m71n4srj6v")) (modules '((guix build utils))) (snippet '(begin ;; Do not record a timestamp and file name in gzipped man ;; pages (this is equivalent to 'gzip --no-name'.) (substitute* "setup.py" (("gzip\\.open\\(gzfile, 'w', 9\\)") "gzip.GzipFile('', 'wb', 9, open(gzfile, 'wb'), 0.)")) #t)))) (build-system python-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'configure (lambda* (#:key inputs #:allow-other-keys) (substitute* "screenlayout/xrandr.py" (("\"xrandr\"") (string-append "\"" (assoc-ref inputs "xrandr") "/bin/xrandr\""))) #t)) (add-after 'install 'wrap-gi-typelib (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (gi-typelib-path (getenv "GI_TYPELIB_PATH"))) (wrap-program (string-append out "/bin/arandr") `("GI_TYPELIB_PATH" ":" prefix (,gi-typelib-path)))) #t))) #:tests? #f)) ;no tests (inputs `(("gtk+" ,gtk+) ("pycairo" ,python-pycairo) ("pygobject" ,python-pygobject) ("xrandr" ,xrandr))) (native-inputs `(("gettext" ,gettext-minimal) ("python-docutils" ,python-docutils))) (home-page "https://christian.amsuess.com/tools/arandr/") (synopsis "Another RandR graphical user interface") ;; TRANSLATORS: "X11 resize-and-rotate" should not be translated. (description "ARandR is designed to provide a simple visual front end for the X11 resize-and-rotate (RandR) extension. Relative monitor positions are shown graphically and can be changed in a drag-and-drop way. Configurations are saved as executable shell scripts which can be loaded without using this program.") (license license:gpl3+))) (define-public autorandr (package (name "autorandr") (version "1.10.1") (home-page "https://github.com/phillipberndt/autorandr") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0msw9b1hdy3gbq9w5d04mfizhyirz1c648x84mlcbzl8salm7vpg")))) (build-system python-build-system) (native-inputs (list pkg-config)) (inputs (list xrandr libxcb)) (arguments `(#:phases (modify-phases %standard-phases (add-before 'build 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (let ((xrandr (search-input-file inputs "/bin/xrandr"))) (substitute* "contrib/etc/xdg/autostart/autorandr.desktop" (("/usr") (assoc-ref outputs "out"))) (substitute* "autorandr.py" (("popen\\(\"xrandr") (string-append "popen(\"" xrandr)) (("\\[\"xrandr") (string-append "[\"" xrandr))) (substitute* "contrib/autorandr_launcher/autorandr_launcher.c" (("/usr/bin/autorandr") (string-append (assoc-ref outputs "out") "/bin/autorandr"))) (setenv "CC" "gcc")) #t)) (add-after 'install 'install-contrib (lambda* (#:key outputs #:allow-other-keys) (invoke "make" (string-append "DESTDIR=" (assoc-ref outputs "out")) "PREFIX=" "BASH_COMPLETIONS_DIR=etc/bash_completion.d" "install" "TARGETS=autorandr launcher manpage bash_completion")))))) (synopsis "Auto-detect connected displays and load appropriate setup") (description "Autorandr wraps around xrandr to help with X11 multi-screen configuration management. It allows the user to create profiles for various multi-screen setups. Autorandr automatically detects the profiles that can be activated based on the connected hardware. Hook scripts can be used to further tweak the behaviour of the different profiles.") (license license:gpl3+))) (define-public bemenu (package (name "bemenu") (version "0.6.4") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Cloudef/bemenu") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "18vplvnymgc6576sdh84lm5rlwyb9d038plqpjs638hzskf4q577")))) (build-system gnu-build-system) (arguments `(#:tests? #f #:make-flags (list ,(string-append "CC=" (cc-for-target)) "CFLAGS=-O2 -fPIC" (string-append "LDFLAGS=-Wl,-rpath=" (assoc-ref %outputs "out") "/lib") (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)))) ; no configure script (inputs `(("cairo" ,cairo) ("libx11" ,libx11) ("libxkbcomon" ,libxkbcommon) ("libxinerama" ,libxinerama) ("ncurses" ,ncurses) ("pango" ,pango) ("wayland" ,wayland) ("wayland-protocols" ,wayland-protocols))) (native-inputs (list doxygen pkg-config)) (home-page "https://github.com/Cloudef/bemenu") (synopsis "Dynamic menu library and client program inspired by dmenu") (description "bemenu is a dynamic menu which allows the user to flexibly select from a list of options (usually programs to launch). It renders the menu graphically with X11 or Wayland, or in a text terminal with ncurses.") (license (list license:gpl3+ ; client program[s] and other sources license:lgpl3+)))) ; library and bindings (define-public copyq (package (name "copyq") (version "3.9.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/hluk/CopyQ") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0wlwq9xg8rzsbj0b29z358k4mbrqy04iraa8x0p26pa95yskgcma")))) (build-system cmake-build-system) (arguments `(#:configure-flags '("-DCMAKE_BUILD_TYPE=Release") #:tests? #f)) ; Test suite is a rather manual process. (inputs (list qtbase-5 qtscript qtsvg qtx11extras)) (synopsis "Clipboard manager with advanced features") (description "CopyQ is clipboard manager with editing and scripting features. CopyQ monitors system clipboard and saves its content in customized tabs. Saved clipboard can be later copied and pasted directly into any application.") (home-page "https://hluk.github.io/CopyQ/") (license license:gpl3+))) (define-public xkeysnail (package (name "xkeysnail") (version "0.4.0") (source (origin (method url-fetch) (uri (pypi-uri "xkeysnail" version)) (sha256 (base32 "1xyqp6yqxcwmxaqj86qcsiz0ly7bwr0a2w835myz909irhip3ngf")))) (build-system python-build-system) (arguments `(#:tests? #f)) ;tests need /dev/uinput (inputs (list python-appdirs python-evdev python-inotify-simple python-xlib python-six)) (home-page "https://github.com/mooz/xkeysnail") (synopsis "Keyboard remapping tool for the X11 environment") (description "Xkeysnail is an X environment keyboard remapping tool, featuring high-level and flexible remapping mechanisms. It affects the low-level layers (evdev and uinput), making remapping work in almost all the places.") (license license:gpl3+))) ; see README.md (no licence headers) (define-public xkb-switch (package (name "xkb-switch") (version "1.8.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/grwlf/xkb-switch") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1sd6ihgsswp6hjm1i4y092n4gl3gj0bc22grz4n7iy43mwphi40d")))) (build-system cmake-build-system) (arguments `(#:tests? #f)) ;no test target (inputs (list libx11 libxkbfile)) (home-page "https://github.com/grwlf/xkb-switch") (synopsis "Switch your X keyboard layouts from the command line") (description "xkb-switch is a C++ program that queries and changes the XKB layout state.") (license license:gpl3+))) (define-public xclip (package (name "xclip") (version "0.13") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/astrand/xclip") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0q0hmvcjlv8arhh1pzhja2wglyj6n7z209jnpnzd281kqqv4czcs")))) (build-system gnu-build-system) (arguments '(#:tests? #f)) ;there is no test suite (native-inputs (list autoconf automake)) (inputs (list libxmu libxt)) (home-page "https://github.com/astrand/xclip") (synopsis "Command line interface to X11 clipboard") (description "Xclip is a command line interface to the X11 clipboard. It can also be used for copying files, as an alternative to sftp/scp, thus avoiding password prompts when X11 forwarding has already been setup.") (license license:gpl2+))) (define-public libxkbcommon (package (name "libxkbcommon") (version "1.3.0") (source (origin (method url-fetch) (uri (string-append "https://xkbcommon.org/download/libxkbcommon-" version ".tar.xz")) (sha256 (base32 "0ysynzzgzd9jdrh1321r4bgw8wd5zljrlyn5y1a31g39xacf02bv")))) (build-system meson-build-system) (inputs (list libx11 libxcb libxml2 wayland wayland-protocols xkeyboard-config)) (native-inputs (list bison doxygen pkg-config python)) (arguments `(#:configure-flags (list (string-append "-Dxkb-config-root=" (assoc-ref %build-inputs "xkeyboard-config") "/share/X11/xkb") (string-append "-Dx-locale-root=" (assoc-ref %build-inputs "libx11") "/share/X11/locale")))) (home-page "https://xkbcommon.org/") (synopsis "Library to handle keyboard descriptions") (description "Xkbcommon is a library to handle keyboard descriptions, including loading them from disk, parsing them and handling their state. It is mainly meant for client toolkits, window systems, and other system applications; currently that includes Wayland, kmscon, GTK+, Qt, Clutter, and more. Despite the name, it is not currently used by anything X11 (yet).") (license (license:x11-style "file://COPYING" "See 'COPYING' in the distribution.")) (properties '((cpe-name . "xkbcommon"))))) (define-public libfakekey (package (name "libfakekey") (version "0.3") (source (origin (method git-fetch) (uri (git-reference (url "https://git.yoctoproject.org/git/libfakekey") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1jw1d4wc1ysiijirc7apnz3sryrxbl9akgb92mh06dvfkz2nblj0")))) (build-system gnu-build-system) (arguments `(#:make-flags (list "AM_LDFLAGS=-lX11") #:phases (modify-phases %standard-phases (replace 'bootstrap ;; ./autogen.sh calls ./configure before shebangs have been patched. (lambda _ (invoke "autoreconf" "-vfi")))))) (native-inputs (list pkg-config ;; For bootstrapping from git. autoconf automake libtool)) (inputs (list libxtst libx11)) (home-page "https://www.yoctoproject.org/tools-resources/projects/matchbox") (synopsis "X virtual keyboard library") (description "Libfakekey is a virtual keyboard library for X.") (license license:gpl2))) (define-public xdotool (package (name "xdotool") (version "3.20211022.1") (source (origin (method url-fetch) (uri (string-append "https://github.com/jordansissel/xdotool/releases/download/v" version "/xdotool-" version ".tar.gz")) (sha256 (base32 "1nlsbwsdsgys607f00sc8xgb7l7cdzsb14avsg5fly3dvv7zmw4n")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; Test suite requires a lot of black magic #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key outputs #:allow-other-keys #:rest args) (let ((out (assoc-ref outputs "out"))) (mkdir-p (string-append out "/lib")) (setenv "PREFIX" out) (setenv "LDFLAGS" (string-append "-Wl,-rpath=" out "/lib")) (setenv "CC" "gcc") #t)))))) (native-inputs (list perl)) ; for pod2man (inputs (list libx11 libxext libxi libxinerama libxtst libxkbcommon)) (home-page "https://www.semicomplete.com/projects/xdotool/") (synopsis "Fake keyboard/mouse input, window management, and more") (description "Xdotool lets you simulate keyboard input and mouse activity, move and resize windows, etc. It does this using X11's XTEST extension and other Xlib functions. Additionally, you can search for windows and move, resize, hide, and modify window properties like the title. If your window manager supports it, you can use xdotool to switch desktops, move windows between desktops, and change the number of desktops.") (license license:bsd-3))) (define-public xdo (package (name "xdo") (version "0.5.7") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/baskerville/xdo") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1h3jrygcjjbavdbkpx2hscsf0yf97gk487lzjdlvymd7dxdv9hy9")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests #:make-flags (list (string-append "CC=" ,(cc-for-target)) (string-append "PREFIX=" %output)) #:phases (modify-phases %standard-phases (delete 'configure)))) (inputs (list libxcb xcb-util-wm xcb-util)) (home-page "https://github.com/baskerville/xdo") (synopsis "Small X utility to perform elementary actions on windows") (description "Apply the given action to the given windows. If no window IDs and no options are given, the action applies to the focused window.") (license license:bsd-2))) (define-public xeyes (package (name "xeyes") (version "1.1.2") (source (origin (method url-fetch) (uri (string-append "https://www.x.org/releases/individual/app/" name "-" version ".tar.bz2")) (sha256 (base32 "0lq5j7fryx1wn998jq6h3icz1h6pqrsbs3adskjzjyhn5l6yrg2p")))) (build-system gnu-build-system) (inputs (list libxext libxmu libxrender libxt)) (native-inputs (list pkg-config)) (home-page "https://www.x.org/") ; no dedicated Xeyes page exists (synopsis "Follow-the-mouse X demo") (description "Xeyes is a demo program for x.org. It shows eyes following the mouse.") (license license:x11))) (define-public pixman (package (name "pixman") (version "0.40.0") (source (origin (method url-fetch) (uri (string-append "https://www.cairographics.org/releases/pixman-" version ".tar.gz")) (sha256 (base32 "1z13n96m7x91j25qq9wlkxsbq04wfwjhw66ir17frna06zn0s83d")) (patches (search-patches "pixman-CVE-2016-5296.patch")))) (build-system gnu-build-system) (arguments `(#:configure-flags (list "--disable-static" "--enable-timers" "--enable-gnuplot"))) (native-inputs (list pkg-config)) (inputs (list libpng zlib)) (synopsis "Low-level pixel manipulation library") (description "Pixman is a low-level software library for pixel manipulation, providing features such as image compositing and trapezoid rasterisation.") (home-page "http://www.pixman.org/") (license license:expat))) (define-public libdrm (package (name "libdrm") (version "2.4.107") (source (origin (method url-fetch) (uri (string-append "https://dri.freedesktop.org/libdrm/libdrm-" version ".tar.xz")) (sha256 (base32 "127qf1rzhaf13vdd75a58v5q34617hvangjlfnlkcdh37gqcwm65")))) (build-system meson-build-system) (arguments `(#:configure-flags '(,@(match (%current-system) ((or "armhf-linux" "aarch64-linux") '("-Dexynos=true" "-Domap=true" "-Detnaviv=true" "-Dtegra=true" "-Dfreedreno-kgsl=true")) (_ '()))) #:phases (modify-phases %standard-phases (replace 'check (lambda* (#:key tests? #:allow-other-keys) (when tests? (invoke "meson" "test" "--timeout-multiplier" "5"))))))) (propagated-inputs (list libpciaccess)) (native-inputs (list pkg-config)) (home-page "https://dri.freedesktop.org/wiki/") (synopsis "Direct rendering userspace library") (description "The Direct Rendering Infrastructure, also known as the DRI, is a framework for allowing direct access to graphics hardware under the X Window System in a safe and efficient manner. It includes changes to the X server, to several client libraries, and to the kernel (DRM, Direct Rendering Manager). The most important use for the DRI is to create fast OpenGL implementations providing hardware acceleration for Mesa. Several 3D accelerated drivers have been written to the DRI specification, including drivers for chipsets produced by 3DFX, AMD (formerly ATI), Intel and Matrox.") (license license:x11))) (define-public mtdev (package (name "mtdev") (version "1.1.6") (source (origin (method url-fetch) (uri (string-append "http://bitmath.org/code/mtdev/mtdev-" version ".tar.bz2")) (sha256 (base32 "1q700h9dqcm3zl6c3gj0qxxjcx6ibw2c51wjijydhwdcm26v5mqm")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--disable-static"))) (home-page "http://bitmath.org/code/mtdev/") (synopsis "Multitouch protocol translation library") (description "Mtdev is a stand-alone library which transforms all variants of kernel MT events to the slotted type B protocol. The events put into mtdev may be from any MT device, specifically type A without contact tracking, type A with contact tracking, or type B with contact tracking.") (license license:x11))) (define-public startup-notification (package (name "startup-notification") (version "0.12") (source (origin (method url-fetch) (uri (string-append "https://www.freedesktop.org/software/" name "/releases/" name "-" version ".tar.gz")) (sha256 (base32 "0jmyryrpqb35y9hd5sgxqy2z0r1snw7d3ljw0jak0n0cjdz1yf9w")))) (build-system gnu-build-system) (native-inputs (list pkg-config)) (inputs (list libx11 xcb-util)) (home-page "https://www.freedesktop.org/wiki/Software/startup-notification/") (synopsis "Application startup notification and feedback library") (description "Startup-notification contains a reference implementation of the startup notification protocol. The reference implementation is mostly under an X Window System style license, and has no special dependencies.") ;; Most of the code is provided under x11 license. (license license:lgpl2.0+))) (define-public wmctrl (package (name "wmctrl") (version "1.07") (source (origin (method url-fetch) (uri (string-append "https://sites.google.com/site/tstyblo/wmctrl/wmctrl-" version ".tar.gz")) (sha256 (base32 "1afclc57b9017a73mfs9w7lbdvdipmf9q0xdk116f61gnvyix2np")) (patches (search-patches "wmctrl-64-fix.patch")))) (build-system gnu-build-system) (arguments '(#:configure-flags (list (string-append "--mandir=" (assoc-ref %outputs "out") "/share/man")))) (native-inputs (list pkg-config)) (inputs (list libx11 libxmu glib)) (home-page "http://tomas.styblo.name/wmctrl/") (synopsis "Command-line tool to control X window managers") (description "Wmctrl interacts with an X window manager that is compatible with the EWMH/NetWM specification. It can query the window manager for information, and request for certain window management actions (resize and move windows, switch between desktops, etc.).") (license license:gpl2+))) (define-public scrot (package (name "scrot") (version "1.7") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/resurrecting-open-source-projects/scrot") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0rls08mpalx4xp5ysmg7m5lgx9q8g8m8q40m47f11mqa84z88nd1")))) (build-system gnu-build-system) (native-inputs (list autoconf autoconf-archive automake pkg-config)) (inputs (list giblib imlib2 libbsd libx11 libxcomposite libxext libxfixes)) (home-page "https://github.com/resurrecting-open-source-projects/scrot") (synopsis "Command-line screen capture utility for X Window System") (description "Scrot saves a screenshot of a full screen, a window or a part of the screen selected by mouse.") ;; This license removes a clause about X Consortium from the original ;; X11 license. (license (license:x11-style "file://COPYING" "See 'COPYING' in the distribution.")))) (define-public slop (package (name "slop") (version "7.6") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/naelstrof/slop") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1xaka98vka5kh3wmby68ifwi6rp0985dj13fgs96bw8a1z3m1l1d")))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; no "check" target (inputs (list glew glm icu4c libxext libxrender mesa)) (home-page "https://github.com/naelstrof/slop") (synopsis "Select a region and print its bounds to stdout") (description "slop (Select Operation) is a tool that queries for a selection from a user and prints the region to stdout. It grabs the mouse and turns it into a crosshair, lets the user click and drag to make a selection (or click on a window) while drawing a pretty box around it, then finally prints the selection's dimensions to stdout.") (license license:gpl3+))) (define-public maim (package (name "maim") (version "5.6.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/naelstrof/maim") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "181mjjrjb9fs1ficcv9miqbk94v95j1yli7fjp2dj514g7nj9l3x")))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; no "check" target (inputs `(("glm" ,glm) ("libjpeg" ,libjpeg-turbo) ("libpng" ,libpng) ("libxcomposite" ,libxcomposite) ("libxfixes" ,libxfixes) ("libxrandr" ,libxrandr) ("mesa" ,mesa) ("slop" ,slop) ("zlib" ,zlib))) (home-page "https://github.com/naelstrof/maim") (synopsis "Screenshot utility for X Window System") (description "maim (Make Image) is a tool that takes screenshots of your desktop and saves it in any format. Along with a full screen, it allows you to capture a predefined region or a particular window. Also, it makes it possible to include cursor in the resulting image.") (license license:gpl3+))) (define-public unclutter (package (name "unclutter") (version "8") (source (origin (method url-fetch) (uri (string-append "http://ftp.x.org/contrib/utilities/unclutter-" version ".tar.Z")) (sha256 (base32 "0ahrr5z6wxqqfyihm112hnq0859zlxisrb3y5232zav58j6sfmdq")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no check target #:phases (modify-phases %standard-phases (delete 'configure) (replace 'install (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (man1 (string-append out "/share/man/man1"))) (mkdir-p bin) (mkdir-p man1) (invoke "make" "install" "install.man" (string-append "BINDIR=" bin) (string-append "MANDIR=" man1)))))))) (inputs (list libx11)) (home-page "http://ftp.x.org/contrib/utilities/") (synopsis "Hide idle mouse cursor") (description "Unclutter is a program which runs permanently in the background of an X11 session. It checks on the X11 pointer (cursor) position every few seconds, and when it finds it has not moved (and no buttons are pressed on the mouse, and the cursor is not in the root window) it creates a small sub-window as a child of the window the cursor is in. The new window installs a cursor of size 1x1 but a mask of all 0, i.e. an invisible cursor. This allows you to see all the text in an xterm or xedit, for example. The human factors crowd would agree it should make things less distracting.") (license license:public-domain))) (define-public unclutter-xfixes (package (name "unclutter-xfixes") (version "1.5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Airblader/unclutter-xfixes") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "148m4wx8v57s3l2wb69y9imb00y8ca2li27hsxibwnl1wrkb7z4b")))) (build-system gnu-build-system) (arguments `(#:tests? #f #:make-flags (list ,(string-append "CC=" (cc-for-target)) (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)))) (inputs (list libx11 libev libxfixes libxi)) (native-inputs (list asciidoc pkg-config)) (home-page "https://github.com/Airblader/unclutter-xfixes") (synopsis "Hide idle mouse cursor") (description "unclutter-xfixes is a rewrite of the popular tool unclutter, but using the x11-xfixes extension. This means that this rewrite doesn't use fake windows or pointer grabbing and hence causes less problems with window managers and/or applications. Unclutter is a program which runs permanently in the background of an X11 session. It checks on the X11 pointer (cursor) position every few seconds, and when it finds it has not moved (and no buttons are pressed on the mouse, and the cursor is not in the root window) it creates a small sub-window as a child of the window the cursor is in. The new window installs a cursor of size 1x1 but a mask of all 0, i.e. an invisible cursor. This allows you to see all the text in an xterm or xedit, for example. The human factors crowd would agree it should make things less distracting.") (license license:expat))) (define-public xautomation (package (name "xautomation") (version "1.09") (source (origin (method url-fetch) (uri (string-append "https://www.hoopajoo.net/static/projects/" "xautomation-" version ".tar.gz")) (sha256 (base32 "03azv5wpg65h40ip2kk1kdh58vix4vy1r9bihgsq59jx2rhjr3zf")))) (build-system gnu-build-system) (inputs (list libpng libx11 libxi libxtst)) (native-inputs (list xorgproto)) (synopsis "Tools to automate tasks in X such as detecting on screen images") (description "Xautomation can control X from the command line for scripts, and do visual scraping to find things on the screen. The control interface allows mouse movement, clicking, button up/down, key up/down, etc, and uses the XTest extension so you don't have the annoying problems that xse has when apps ignore sent events. The visgrep program can find images inside of images and reports the coordinates, allowing programs to find buttons, etc, on the screen to click on.") (home-page "https://www.hoopajoo.net/projects/xautomation.html") (license license:gpl2+))) (define-public xbanish (package (name "xbanish") (version "1.8") (home-page "https://github.com/jcs/xbanish") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "12mjwn8hvrrhwyg3wi20bqr6k8d57xf9m5qr3s4nn511dcksh04g")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no tests #:make-flags (list ,(string-append "CC=" (cc-for-target)) (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)))) ; no configure script (inputs (list libx11 libxfixes libxi libxt)) (synopsis "Banish the mouse cursor") (description "@command{xbanish} hides the mouse cursor when you start typing, and shows it again when the mouse cursor moves or a mouse button is pressed.") (license license:bsd-3))) (define-public xlockmore (package (name "xlockmore") (version "5.68") (source (origin (method url-fetch) (uri (list (string-append "http://sillycycle.com/xlock/" "xlockmore-" version ".tar.xz") ;; Previous releases are moved to a subdirectory. (string-append "http://sillycycle.com/xlock/" "recent-releases/" "xlockmore-" version ".tar.xz"))) (sha256 (base32 "0vndfwccnvkaaraprjam8pmx0aj55va0ag64q6snxw83nbf1ywrh")))) (build-system gnu-build-system) (arguments (list #:configure-flags #~(list (string-append "--enable-appdefaultdir=" #$output "/lib/X11/app-defaults")) #:tests? #f)) ;no such thing as a test suite (inputs (list libx11 libxext libxt linux-pam)) (home-page "https://sillycycle.com/xlockmore.html") (synopsis "Screen locker for the X Window System") (description "XLockMore is a classic screen locker and screen saver for the X Window System.") (license (license:non-copyleft #f "See xlock.c.") ))) ; + GPLv2 in modes/glx/biof.c. (define-public xosd (package (name "xosd") (version "2.2.14") (source (origin (method url-fetch) (uri (string-append "mirror://sourceforge/libxosd/libxosd/xosd-" version "/" name "-" version ".tar.gz")) (sha256 (base32 "025m7ha89q29swkc7s38knnbn8ysl24g2h5s7imfxflm91psj7sg")))) (build-system gnu-build-system) (arguments '(#:configure-flags (list (string-append "--mandir=" %output "/share/man")))) (inputs (list libx11 libxt libxext libxinerama)) (home-page "https://sourceforge.net/projects/libxosd/") (synopsis "X On Screen Display") (description "XOSD provides a C library and a simple utility (osd_cat) for displaying transparent text on your screen.") (license license:gpl2+))) (define-public wob (package (name "wob") (version "0.13") (source (origin (method url-fetch) (uri (string-append "https://github.com/francma/wob/releases/download/" version "/wob-" version ".tar.gz")) (sha256 (base32 "0i8y6kq37qcgdq85ll4rapisjl7zw6aa11yx2f2xw2d3j93kdxh8")))) (build-system meson-build-system) (native-inputs (list pkg-config scdoc)) (inputs (list libseccomp wayland wayland-protocols)) (home-page "https://github.com/francma/wob") (synopsis "Lightweight overlay bar for Wayland") (description "Wob, or Wayland Overlay Bar, is a lightweight overlay volume, backlight, progress, or anything bar for Wayland.") (license license:isc))) (define-public xbindkeys (package (name "xbindkeys") (version "1.8.7") (source (origin (method url-fetch) ;; Download from the savannah mirror list fails (uri (string-append "http://www.nongnu.org/xbindkeys/xbindkeys-" version ".tar.gz")) (sha256 (base32 "1wl2vc5alisiwyk8m07y1ryq8w3ll9ym83j27g4apm4ixjl8d6x2")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'sanitise-shebang ;; This wish script uses a strange double shebang that escapes our ;; patch-shebangs phase. Assume that it's unnecessary & replace it. (lambda _ (substitute* "xbindkeys_show" (("^#!.*|^exec wish.*") "") (("^# \\\\") (string-append "#!" (which "wish")))) #t)) (add-after 'unpack 'patch-references (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* "xbindkeys_show" (("\"(xbindkeys)\"" _ command) (format #f "\"~a/bin/~a\"" out command))) #t)))))) (native-inputs (list pkg-config)) (inputs (list guile-2.2 libx11 tk)) (home-page "https://www.nongnu.org/xbindkeys/") (synopsis "Associate a combination of keys with a shell command") (description "XBindKeys is a program that allows you to launch shell commands with your keyboard or your mouse under the X Window System. It links commands to keys or mouse buttons, using a configuration file. It's independent of the window manager and can capture all keyboard keys (ex: Power, Wake...). It optionally supports a Guile-based configuration file layout, which enables you to access all XBindKeys internals, so you can have key combinations, double clicks or timed double clicks take actions. Also all functions that work in Guile will work for XBindKeys.") (license license:gpl2+))) (define-public sxhkd (package (name "sxhkd") (version "0.6.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/baskerville/sxhkd") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1winwzdy9yxvxnrv8gqpigl9y0c2px27mnms62bdilp4x6llrs9r")))) (build-system gnu-build-system) (inputs (list asciidoc libxcb xcb-util xcb-util-keysyms xcb-util-wm)) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure)) #:tests? #f ; no check target #:make-flags (list ,(string-append "CC=" (cc-for-target)) (string-append "PREFIX=" %output) ;; Keep the documentation where the build system installs LICENSE. (string-append "DOCPREFIX=" %output "/share/doc/" ,name "-" ,version)))) (home-page "https://github.com/baskerville/sxhkd") (synopsis "Simple X hotkey daemon") (description "sxhkd is a simple X hotkey daemon with a powerful and compact configuration syntax.") (license license:bsd-2))) (define-public rxvt-unicode (package (name "rxvt-unicode") (version "9.30") (source (origin (method url-fetch) (uri (string-append "http://dist.schmorp.de/rxvt-unicode/Attic/" name "-" version ".tar.bz2")) (sha256 (base32 "0badnkjsn3zps24r5iggj8k5v4f00npc77wqg92pcn1q5z8r677y")))) (build-system gnu-build-system) (arguments ;; This sets the destination when installing the necessary terminal ;; capability data, which are not provided by 'ncurses'. See ;; https://lists.gnu.org/archive/html/bug-ncurses/2009-10/msg00031.html `(#:configure-flags (list "--enable-256-color") #:make-flags (list (string-append "TERMINFO=" (assoc-ref %outputs "out") "/share/terminfo")) #:phases (modify-phases %standard-phases (add-after 'install 'install-desktop-urxvt (lambda* (#:key outputs #:allow-other-keys) (let* ((output (assoc-ref outputs "out")) (desktop (string-append output "/share/applications"))) (mkdir-p desktop) (with-output-to-file (string-append desktop "/urxvt.desktop") (lambda _ (format #t "[Desktop Entry]~@ Name=rxvt-unicode~@ Comment=~@ Exec=~a/bin/urxvt~@ TryExec=~@*~a/bin/urxvt~@ Icon=~@ Type=Application~%" output)))))) (add-after 'install 'install-desktop-urxvtc (lambda* (#:key outputs #:allow-other-keys) (let* ((output (assoc-ref outputs "out")) (desktop (string-append output "/share/applications"))) (mkdir-p desktop) (with-output-to-file (string-append desktop "/urxvtc.desktop") (lambda _ (format #t "[Desktop Entry]~@ Name=rxvt-unicode (client)~@ Comment=Rxvt clone with XFT and unicode support~@ Exec=~a/bin/urxvtc~@ TryExec=~@*~a/bin/urxvtc~@ Icon=~@ Type=Application~%" output))))))))) (inputs `(("libptytty" ,libptytty) ("libXft" ,libxft) ("libX11" ,libx11) ("libXt" ,libxt))) (native-inputs (list ncurses ;trigger the installation of terminfo data perl pkg-config)) ;; FIXME: This should only be located in 'ncurses'. Nonetheless it is ;; provided for usability reasons. See . (native-search-paths (list (search-path-specification (variable "TERMINFO_DIRS") (files '("share/terminfo"))))) (home-page "http://software.schmorp.de/pkg/rxvt-unicode.html") (synopsis "Rxvt clone with XFT and unicode support") (description "Rxvt-unicode (urxvt) is a colour vt102 terminal emulator intended as an xterm replacement for users who do not require features such as Tektronix 4014 emulation and toolkit-style configurability. It supports unicode, XFT and may be extended with Perl plugins. It also comes with a client/daemon pair that lets you open any number of terminal windows from within a single process.") (license license:gpl3+))) (define-public xcape (package (name "xcape") (version "1.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/alols/xcape") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "09a05cxgrip6nqy1qmwblamp2bhknqnqmxn7i2a1rgxa0nba95dm")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no check target ;; no configure script #:phases (modify-phases %standard-phases (delete 'configure)) #:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out")) "MANDIR=/share/man/man1" ,(string-append "CC=" (cc-for-target))))) (inputs (list libxtst libx11)) (native-inputs (list pkg-config)) (home-page "https://github.com/alols/xcape") (synopsis "Use a modifier key in X.org as another key") (description "This utility for X.org uses a modifier key as another key when pressed and released on its own. The default behaviour is to generate the Escape key when Left Control is pressed and released on its own.") (license license:gpl3+))) (define-public libwacom (package (name "libwacom") (version "1.10") (source (origin (method url-fetch) (uri (string-append "https://github.com/linuxwacom/libwacom/releases/download/" "libwacom-" version "/libwacom-" version ".tar.bz2")) (sha256 (base32 "14aj4ss1chxxgaprs9sfriia2ch9wj9rqay0ndkzk1m7jx2qrjgn")))) (build-system glib-or-gtk-build-system) (arguments `(#:configure-flags '("--disable-static"))) (native-inputs (list pkg-config ;; For tests. python)) (inputs (list gtk+ libgudev eudev libxml2)) (propagated-inputs ;; libwacom includes header files that include GLib, and libinput uses ;; those header files. (list glib)) (home-page "https://linuxwacom.github.io/") (synopsis "Helper library for Wacom tablet settings") (description "Libwacom is a library to help implement Wacom tablet settings. It is intended to be used by client-programs that need model identification. It is already being used by the gnome-settings-daemon and the GNOME Control Center Wacom tablet applet.") (license license:x11))) (define-public xf86-input-wacom (package (name "xf86-input-wacom") (version "0.39.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/linuxwacom/xf86-input-wacom/releases/download/" "xf86-input-wacom-" version "/" "xf86-input-wacom-" version ".tar.bz2")) (sha256 (base32 "11qk58az6qwii774ga45h5yqzipwn56f0d74kdbajqdv45p85gqj")))) (arguments `(#:configure-flags (list (string-append "--with-sdkdir=" (assoc-ref %outputs "out") "/include/xorg") (string-append "--with-xorg-conf-dir=" (assoc-ref %outputs "out") "/share/X11/xorg.conf.d")))) (build-system gnu-build-system) (native-inputs (list pkg-config)) (inputs (list xorg-server libxrandr libxinerama libxi eudev)) (home-page "https://linuxwacom.github.io/") (synopsis "Wacom input driver for X") (description "The xf86-input-wacom driver is the wacom-specific X11 input driver for the X.Org X Server version 1.7 and later (X11R7.5 or later).") (license license:x11))) (define-public redshift (package (name "redshift") (version "1.12") (source (origin (method url-fetch) (uri (string-append "https://github.com/jonls/redshift/" "releases/download/v" version "/redshift-" version ".tar.xz")) (sha256 (base32 "1fi27b73x85qqar526dbd33av7mahca2ykaqwr7siqiw1qqcby6j")))) (build-system gnu-build-system) (arguments `(#:imported-modules (,@%gnu-build-system-modules (guix build python-build-system)) #:phases (modify-phases %standard-phases (add-after 'install 'split-outputs (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (gtk (assoc-ref outputs "gtk")) (desktop-file "/share/applications/redshift-gtk.desktop")) (mkdir-p (string-append gtk "/bin")) (link (string-append out "/bin/redshift-gtk") (string-append gtk "/bin/redshift-gtk")) (delete-file (string-append out "/bin/redshift-gtk")) (copy-recursively (string-append out "/lib") (string-append gtk "/lib")) (delete-file-recursively (string-append out "/lib")) (mkdir-p (string-append gtk "/share/applications")) (link (string-append out desktop-file) (string-append gtk desktop-file)) (delete-file (string-append out desktop-file)) (with-directory-excursion (string-append out "/share") (for-each (lambda (dir) (copy-recursively (string-append out "/share/" dir) (string-append gtk "/share/" dir)) (delete-file-recursively dir)) '("appdata" "icons"))) #t))) (add-after 'split-outputs 'wrap (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((gtk (assoc-ref outputs "gtk")) (site-packages (@ (guix build python-build-system) site-packages)) (site (site-packages inputs outputs))) (wrap-program (string-append gtk "/bin/redshift-gtk") `("GUIX_PYTHONPATH" ":" prefix (,(string-append site ":" (getenv "GUIX_PYTHONPATH")))) `("GI_TYPELIB_PATH" ":" prefix (,(getenv "GI_TYPELIB_PATH")))) #t)))))) (outputs '("out" "gtk")) (native-inputs (list pkg-config intltool)) (inputs (list libdrm libx11 libxcb libxxf86vm glib ;for Geoclue2 support ;; To build the GTK3 GUI, we need these. gtk+ python python-pygobject python-pyxdg)) (home-page "https://github.com/jonls/redshift") (synopsis "Adjust the color temperature of your screen") (description "Redshift adjusts the color temperature according to the position of the sun. A different color temperature is set during night and daytime. During twilight and early morning, the color temperature transitions smoothly from night to daytime temperature to allow your eyes to slowly adapt. At night the color temperature should be set to match the lamps in your room.") (license license:gpl3+))) (define-public redshift-wayland (let ((commit "7da875d34854a6a34612d5ce4bd8718c32bec804") (revision "1")) (package (name "redshift-wayland") (version (string-append "1.12-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/minus7/redshift") (commit commit))) (file-name (string-append name "-" version)) (sha256 (base32 "0nbkcw3avmzjg1jr1g9yfpm80kzisy55idl09b6wvzv2sz27n957")))) (build-system gnu-build-system) (arguments '(#:phases (modify-phases %standard-phases (add-after 'install 'create-desktop-file (lambda* (#:key outputs #:allow-other-keys) ;; For the GeoClue provider to work, a .desktop file ;; needs to be provided. A template is available, ;; but it only gets installed when the GUI is enabled. ;; Install it manually for this Wayland variant. (let* ((out (assoc-ref outputs "out")) (desktop-file (string-append out "/share/applications/redshift.desktop"))) (mkdir-p (dirname desktop-file)) (copy-file "data/applications/redshift.desktop.in" desktop-file) (substitute* desktop-file (("^_") "")) #t)))))) (native-inputs (list autoconf automake libtool pkg-config intltool)) (inputs (list libdrm libx11 libxcb libxxf86vm glib ; for Geoclue2 support wayland)) (home-page "https://github.com/minus7/redshift") (synopsis "Adjust the color temperature of your screen (with Wayland support)") (description "Redshift adjusts the color temperature according to the position of the sun. A different color temperature is set during night and daytime. During twilight and early morning, the color temperature transitions smoothly from night to daytime temperature to allow your eyes to slowly adapt. At night the color temperature should be set to match the lamps in your room. This is a fork with added support for Wayland using the wlr-gamma-control protocol.") (license license:gpl3+)))) (define-public gammastep (package (name "gammastep") (version "2.0.8") (source (origin (method git-fetch) (uri (git-reference (url "https://gitlab.com/chinstrap/gammastep") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "071f3iqdbblb3awnx48j19kspk6l2g3658za80i2mf4gacgq9fm1")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'wrap-python-and-typelib (lambda* (#:key outputs #:allow-other-keys) ;; Gammastep GUI needs Typelib files from GTK and access ;; to Python libraries. (wrap-program (string-append (assoc-ref outputs "out") "/bin/gammastep-indicator") `("PYTHONPATH" ":" prefix (,(getenv "GUIX_PYTHONPATH"))) `("GI_TYPELIB_PATH" ":" prefix (,(getenv "GI_TYPELIB_PATH"))))))))) (native-inputs (list autoconf automake gettext-minimal intltool libtool pkg-config)) (inputs (list glib gtk+ libappindicator libdrm libx11 libxxf86vm libxcb python python-pygobject python-pyxdg wayland)) (home-page "https://gitlab.com/chinstrap/gammastep") (synopsis "Adjust the color temperature of your screen") (description "Gammastep automatically adjusts the color temperature of your screen according to your surroundings. This may help your eyes hurt less if you are working in front of the screen at night.") (license license:gpl3))) (define-public xscreensaver (package (name "xscreensaver") (version "5.45") (source (origin (method url-fetch) (uri (string-append "https://www.jwz.org/xscreensaver/xscreensaver-" version ".tar.gz")) (sha256 (base32 "03fmyjlwjinzv7mih6n07glmys8s877snd8zijk2c0ds6rkxy5kh")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; no check target #:phases (modify-phases %standard-phases (add-before 'configure 'adjust-gtk-resource-paths (lambda _ (substitute* '("driver/Makefile.in" "po/Makefile.in.in") (("@GTK_DATADIR@") "@datadir@") (("@PO_DATADIR@") "@datadir@")) #t))) #:configure-flags '("--with-pam" "--with-proc-interrupts" "--without-readdisplay") #:make-flags (list (string-append "AD_DIR=" (assoc-ref %outputs "out") "/lib/X11/app-defaults")))) (native-inputs (list pkg-config intltool)) (inputs `(("libx11" ,libx11) ("libxext" ,libxext) ("libxi" ,libxi) ("libxt" ,libxt) ("libxft" ,libxft) ("libxmu" ,libxmu) ("libxpm" ,libxpm) ("libglade" ,libglade) ("libxml2" ,libxml2) ("libsm" ,libsm) ("libjpeg" ,libjpeg-turbo) ("linux-pam" ,linux-pam) ("pango" ,pango) ("gtk+" ,gtk+) ("perl" ,perl) ("cairo" ,cairo) ("bc" ,bc) ("libxrandr" ,libxrandr) ("glu" ,glu) ("glib" ,glib))) (home-page "https://www.jwz.org/xscreensaver/") (synopsis "Classic screen saver suite supporting screen locking") (description "xscreensaver is a popular screen saver collection with many entertaining demos. It also acts as a nice screen locker.") ;; xscreensaver doesn't have a single copyright file and instead relies on ;; source comment headers, though most files have the same lax ;; permissions. To reduce complexity, we're pointing at Debian's ;; breakdown of the copyright information. (license (license:non-copyleft (string-append "http://metadata.ftp-master.debian.org/changelogs/" "/main/x/xscreensaver/xscreensaver_5.36-1_copyright"))))) (define-public xssproxy (package (name "xssproxy") (version "1.0.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/timakro/xssproxy") (commit (string-append "v" version)))) (file-name (string-append name "-" version "-checkout")) (sha256 (base32 "0c83wmipnsdnbihc5niyczs7jrkss2s8n6iwwjdia7hkjzbd0hl7")))) (build-system gnu-build-system) (arguments `(#:make-flags `("bindir=/bin" "man1dir=/share/man/man1" ,(string-append "DESTDIR=" (assoc-ref %outputs "out")) ,,(string-append "CC=" (cc-for-target))) #:phases (modify-phases %standard-phases (delete 'configure) (delete 'check)))) (native-inputs (list pkg-config)) (inputs (list glib libx11 libxext libxscrnsaver dbus)) (synopsis "Forward freedesktop.org Idle Inhibition Service calls to Xss") (description "xssproxy implements the @code{org.freedesktop.ScreenSaver} D-Bus interface described in the Idle Inhibition Service Draft by the freedesktop.org developers. The inhibition of the screensaver is then controlled using the XScreenSaverSuspend function from the Xss (X11 Screen Saver extension) library.") (home-page "https://github.com/timakro/xssproxy") (license license:gpl3+))) (define-public xsel ;; The 1.2.0 release no longer compiles with GCC 8 and upper, see: ;; https://github.com/kfish/xsel/commit/d88aa9a8dba9228e6780d6bb5a5720a36f854918. (let ((commit "062e6d373537c60829fa9b5dcddbcd942986b3c3") (revision "1")) (package (name "xsel") (version (git-version "1.2.0" revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/kfish/xsel") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0fbf80zsc22vcqp59r9fdx4icxhrkv7l3lphw83326jrmkzy6kri")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (replace 'bootstrap (lambda _ (invoke "autoreconf" "-vfi")))))) (native-inputs (list autoconf automake libtool)) (inputs (list libxt)) (home-page "http://www.vergenet.net/~conrad/software/xsel/") (synopsis "Manipulate X selection") (description "XSel is a command-line program for getting and setting the contents of the X selection. Normally this is only accessible by manually highlighting information and pasting it with the middle mouse button. XSel reads from standard input and writes to standard output by default, but can also follow a growing file, display contents, delete entries and more.") (license (license:x11-style "file://COPYING" "See COPYING in the distribution."))))) (define-public xdpyprobe (package (name "xdpyprobe") (version "0.1") (source (origin (method url-fetch) (uri (string-append "https://github.com/alezost/" name "/releases/download/v" version "/" name "-" version ".tar.gz")) (sha256 (base32 "1h09wd2qcg08rj5hcakvdh9q01hkrj8vxly94ax3ch2x06lm0zq8")))) (build-system gnu-build-system) (inputs (list libx11)) (home-page "https://github.com/alezost/xdpyprobe") (synopsis "Probe X server for connectivity") (description "Xdpyprobe is a tiny C program whose only purpose is to probe a connectivity of the X server running on a particular @code{DISPLAY}.") (license license:gpl3+))) (define-public rofi (package (name "rofi") (version "1.7.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/davatorium/rofi/" "releases/download/" version "/rofi-" version ".tar.xz")) (sha256 (base32 "0yxn9pmn9zp0k5ygnjqbj1pmp73g53wa47r145a8qcwqzxl8p1i5")))) (build-system gnu-build-system) (native-inputs (list bison check flex `(,glib "bin") pkg-config)) (inputs (list cairo glib libjpeg-turbo librsvg libxcb libxkbcommon pango startup-notification xcb-util xcb-util-cursor xcb-util-wm xcb-util-xrm)) (native-search-paths ;; This is where rofi will search for plugins by default. (list (search-path-specification (variable "ROFI_PLUGIN_PATH") (files '("lib/rofi"))))) (arguments `(#:parallel-tests? #f ; fails in some circumstances #:phases (modify-phases %standard-phases (add-before 'configure 'adjust-tests (lambda _ (substitute* '("test/helper-expand.c") (("~root") "/root") (("~") "") (("g_get_home_dir \\(\\)") "\"/\""))))))) (home-page "https://github.com/davatorium/rofi") (synopsis "Application launcher") (description "Rofi is a minimalist application launcher. It memorizes which applications you regularly use and also allows you to search for an application by name.") (license license:expat))) (define-public rofi-wayland (package (inherit rofi) (name "rofi-wayland") (version "1.7.3+wayland1") (source (origin (method url-fetch) (uri (string-append "https://github.com/lbonn/rofi" "/releases/download/" version "/rofi-" version ".tar.xz")) (sha256 (base32 "1gfs13zfqg9f4prx8yylxvv93yr6j74nmhlm3wabr6jljbbr7jc8")))) (build-system meson-build-system) (arguments (substitute-keyword-arguments (package-arguments rofi) ((#:configure-flags flags '()) #~(list "-Dxcb=disabled")))) (inputs (list cairo glib libjpeg-turbo librsvg libxkbcommon wayland wayland-protocols pango startup-notification)) (home-page "https://github.com/lbonn/rofi") (description "Rofi is a minimalist application launcher. It memorizes which applications you regularly use and also allows you to search for an application by name. This is a fork with added support for Wayland via layer shell protocol."))) (define-public rofi-calc (package (name "rofi-calc") (version "2.1.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/svenstaro/rofi-calc") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "021z7hwvdcs3g7icyp6xhry0xlq29gg1288hg2kzyzqq4l2irxdi")))) (build-system gnu-build-system) (arguments (list #:phases #~(modify-phases %standard-phases ;; Don't try to install directly to rofi, instead install ;; to lib/rofi to match rofi's search-path ROFI_PLUGIN_PATH. (add-after 'unpack 'patch-plugindir (lambda _ (substitute* "Makefile.am" (("plugindir=\\$\\{rofi_PLUGIN_INSTALL_DIR\\}\\/") "plugindir=${libdir}/rofi/")))) (add-after 'unpack 'patch-qalc-path (lambda* (#:key inputs #:allow-other-keys) (substitute* "src/calc.c" (("\"qalc\"") (string-append "\"" (search-input-file inputs "bin/qalc") "\"")))))))) (inputs (list cairo libqalculate rofi)) (native-inputs (list autoconf automake libtool pkg-config)) (home-page "https://github.com/svenstaro/rofi-calc") (synopsis "Do live calculations in rofi with qalc") (description "@code{rofi-calc} is a rofi plugin that uses qalculate's @code{qalc} to parse natural language input and provide results.") (license license:expat))) (define-public tint2 (package (name "tint2") (version "0.14.6") (source (origin (method url-fetch) (uri (string-append "https://gitlab.com/o9000/" name "/repository/archive.tar.gz?ref=" version)) (file-name (string-append name "-" version ".tar.gz")) (sha256 (base32 "1kwzwxy4myagybm3rc7dgynfgp75742n348qibn1p2an9ggyivda")))) (build-system cmake-build-system) (arguments '(#:tests? #f ;no test target #:phases (modify-phases %standard-phases (add-after 'unpack 'fix-installation-prefix (lambda _ (substitute* "CMakeLists.txt" (("/etc") "${CMAKE_INSTALL_PREFIX}/etc")) #t))))) (inputs (list gtk+-2 imlib2 librsvg libxcomposite libxdamage libxft libxinerama libxrandr startup-notification)) (native-inputs `(("gettext" ,gettext-minimal) ("pkg-config" ,pkg-config))) (home-page "https://gitlab.com/o9000/tint2") (synopsis "Lightweight task bar") (description "Tint2 is a simple task bar made for modern X window managers. It was specifically made for Openbox but it should also work with other window managers (GNOME, KDE, XFCE etc.). The taskbar includes transparency and color settings for the font, icons, border, and background. It also supports multihead setups, customized mouse actions, a built-in clock, a battery monitor and a system tray.") (license license:gpl2))) (define-public dzen (let ((commit "488ab66019f475e35e067646621827c18a879ba1") (revision "1")) (package (name "dzen") (version (string-append "0.9.5-" ; Taken from `config.mk`. revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/robm/dzen") (commit commit))) (file-name (string-append name "-" version)) (sha256 (base32 "0y47d6ii87vf4a517gi4fh0yl06f8b085sra77immnsasbq9pxnw")))) (build-system gnu-build-system) (arguments `(#:tests? #f ; No test suite. #:make-flags ; Replacement for `config.mk`. (list (string-append "VERSION = " ,version) (string-append "PREFIX = " %output) "MANPREFIX = ${PREFIX}/share/man" "INCS = -I." "LIBS = -lc -lX11 -lXinerama -lXpm $(shell pkg-config --libs xft)" "CFLAGS = -Wall -Os ${INCS} -DVERSION=\\\"${VERSION}\\\"\ -DDZEN_XINERAMA -DDZEN_XPM -DDZEN_XFT $(shell pkg-config --cflags xft)" "LDFLAGS = ${LIBS}" "CC = gcc" "LD = ${CC}") #:phases (modify-phases %standard-phases (delete 'configure) ; No configuration script. ;; Use own make-flags instead of `config.mk`. (add-before 'build 'dont-include-config-mk (lambda _ (substitute* "Makefile" (("include config.mk") "")) #t))))) (inputs (list libx11 libxft libxpm libxinerama)) (native-inputs (list pkg-config)) (synopsis "General purpose messaging, notification and menuing program for X11") (description "Dzen is a general purpose messaging, notification and menuing program for X11. It was designed to be fast, tiny and scriptable in any language.") (home-page "https://github.com/robm/dzen") (license license:expat)))) (define-public xftwidth (package (name "xftwidth") (version "20170402") (source (origin (method git-fetch) (uri (git-reference (url "http://github.com/vixus0/xftwidth") (commit "35ff963908d41a8a6a7101c434c88255728025ee"))) (sha256 (base32 "1jwl25785li24kbp0m1wxfwk4dgxkliynn03nsj813cjr34kq16h")) (file-name (string-append name "-" version "-checkout")))) (build-system gnu-build-system) (inputs `(("freetype" ,freetype) ("libx11" ,libx11) ("fontconfig" ,fontconfig) ("libxft" ,libxft))) (native-inputs (list pkg-config)) (arguments '(#:phases (modify-phases %standard-phases (add-after 'unpack 'fix-makefile ; /usr/bin doesn't show up in PATH (lambda _ (substitute* "Makefile" (("usr/") "")) #t)) (delete 'check) ; no check included in Makefile (delete 'configure)) #:make-flags (let ((out (assoc-ref %outputs "out"))) (list (string-append "DESTDIR=" out))))) (home-page "https://github.com/vixus0/xftwidth") (synopsis "Calculator for determining pixel widths of displayed text using Xft fonts") (description "xftwidth is a small C program for calculating the pixel widths of displayed text using Xft fonts. It is especially useful in scripts for displaying text in graphical panels, menus, popups, and notification windows generated using dzen. These scripts are often used in conjunction with minimalistic tiling window managers such as herbstluftwm and bspwm.") (license license:expat))) (define-public xcb-util-xrm (package (name "xcb-util-xrm") (version "1.3") (source (origin (method url-fetch) (uri (string-append "https://github.com/Airblader/xcb-util-xrm/releases" "/download/v" version "/xcb-util-xrm-" version ".tar.bz2")) (sha256 (base32 "118cj1ybw86pgw0l5whn9vbg5n5b0ijcpx295mwahzi004vz671h")) (modules '((guix build utils))) (snippet ;; Drop bundled m4. '(begin (delete-file-recursively "m4") #t)))) (build-system gnu-build-system) (native-inputs (list pkg-config m4 libx11)) ; for tests (inputs (list libxcb xcb-util)) (home-page "https://github.com/Airblader/xcb-util-xrm") (synopsis "XCB utility functions for the X resource manager") (description "The XCB util module provides a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries. These experimental libraries provide convenience functions and interfaces which make the raw X protocol more usable. Some of the libraries also provide client-side code which is not strictly part of the X protocol but which has traditionally been provided by Xlib. XCB util-xrm module provides the following libraries: - xrm: utility functions for the X resource manager.") (license license:x11))) (define-public xcalib (package (name "xcalib") (version "0.10") (home-page "https://github.com/OpenICC/xcalib") (source (origin (method git-fetch) (uri (git-reference (url home-page) (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "05fzdjmhiafgi2jf0k41i3nm0837a78sb6yv59cwc23nla8g0bhr")) (patches (list ;; Add missing documentation for the new --output option. ;; This upstream patch can be removed on the next update. (origin (method url-fetch) (uri (string-append home-page "/commit/" "ae03889b91fe984b18e925ad2b5e6f2f7354e058.patch")) (file-name "xcalib-update-man-page.patch") (sha256 (base32 "0f7b4d5484x4b9n1bwhqmar0kcaa029ffff7bp3xpr734n1qgqb6"))))))) (build-system cmake-build-system) (arguments '(#:tests? #f)) ; no test suite (inputs (list libx11 libxext libxrandr libxxf86vm)) (synopsis "Tiny monitor calibration loader for XFree86 (or X.org)") (description "xcalib is a tiny tool to load the content of vcgt-Tags in ICC profiles to the video card's gamma ramp. It does work with most video card drivers except the generic VESA driver. Alter brightness, contrast, RGB, and invert colors on a specific display/screen.") (license license:gpl2))) (define-public nxbelld (package (name "nxbelld") (version "0.1.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/dusxmt/nxbelld") (commit version))) (sha256 (base32 "04qwhmjs51irinz5mjlxdb3dc6vr79dqmc5fkj80x1ll3ylh5n3z")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (arguments '(#:configure-flags `("--enable-sound" "--enable-wave" "--enable-alsa"))) (native-inputs (list autoconf automake pkg-config perl)) (inputs (list libx11 alsa-lib)) (synopsis "Daemon that performs an action every time the X11 bell is rung") (description "nxbelld is a tiny utility to aid people who either don't like the default PC speaker beep, or use a sound driver that doesn't have support for the PC speaker. The utility performs a given action every time the X bell is rung. The actions nxbelld can currently perform include running a specified program, emulating the PC speaker beep using the sound card (default), or playing a PCM encoded WAVE file.") (home-page "https://github.com/dusxmt/nxbelld") (license license:gpl3+))) (define-public xautolock (package (name "xautolock") (version "2.2") (source (origin (method url-fetch) (uri (string-append "https://www.ibiblio.org/pub/linux/X11/" "screensavers/xautolock-" version ".tgz")) (sha256 (base32 "18jd3k3pvlm5x1adyqw63z2b3f4ixh9mfvz9asvnskk3fm8jgw0i")))) (build-system gnu-build-system) (native-inputs (list imake)) (inputs (list libx11 libxext libxscrnsaver)) (arguments `(#:tests? #f #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key inputs outputs #:allow-other-keys) (let ((imake (assoc-ref inputs "imake")) (out (assoc-ref outputs "out"))) ;; Generate Makefile (invoke "xmkmf") (substitute* "Makefile" ;; These imake variables somehow remain undefined (("DefaultGcc2[[:graph:]]*Opt") "-O2") ;; Reset a few variable defaults that are set in imake templates ((imake) out) (("(MANPATH = )[[:graph:]]*" _ front) (string-append front out "/share/man"))) ;; Old BSD-style 'union wait' is unneeded (defining ;; _USE_BSD did not seem to fix it) (substitute* "src/engine.c" (("union wait status") "int status = 0")) #t))) (add-after 'install 'install/man (lambda _ (invoke "make" "install.man")))))) (home-page "https://ibiblio.org/pub/Linux/X11/screensavers/") (synopsis "Program launcher for idle X sessions") (description "Xautolock monitors input devices under the X Window System, and launches a program of your choice if there is no activity after a user-configurable period of time.") (license license:gpl2))) (define-public screen-message (package (name "screen-message") (version "0.26") (source (origin (method url-fetch) (uri (string-append "https://www.joachim-breitner.de/archive/screen-message" "/screen-message-" version ".tar.gz")) (sha256 (base32 "0dwgm4z3dfk6xz41w8xiv0hmnwr74gf3ykb91b090hc4ffwsf4mw")))) (build-system gnu-build-system) (inputs `(("gtk3" ,gtk+) ("gdk" ,gdk-pixbuf) ("pango" ,pango))) (native-inputs (list pkg-config)) (arguments ;; The default configure puts the 'sm' binary in games/ instead of bin/ - ;; this fixes it: `(#:make-flags (list (string-append "execgamesdir=" %output "/bin")))) (synopsis "Print messages on your screen") (description "@code{screen-message} is a tool for displaying text on your screen. It will make the text as large as possible and display it with black color on a white background (colors are configurable on the commandline).") (home-page "https://www.joachim-breitner.de/projects#screen-message") (license license:gpl2+))) (define-public xss-lock ;; xss-lock does not seem to be maintained any longer, but the last commits ;; fix important issues so we package them. (let ((version "0.3.0") (revision "1") (commit "1e158fb20108058dbd62bd51d8e8c003c0a48717")) (package (name "xss-lock") (version (git-version version revision commit)) (source (origin (method git-fetch) (uri (git-reference (url "https://bitbucket.org/raymonad/xss-lock.git") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "10hx7k7ga8g08akwz8qrsvj8iqr5nd4siiva6sjx789jvf0sak7r")))) (build-system cmake-build-system) (inputs (list glib xcb-util)) (native-inputs (list python-docutils pkg-config)) (arguments `(#:tests? #f)) (synopsis "Use external screen locker on events") (description "@code{xss-lock} listens to X signals to fire up a user-defined screensaver. In effect this automatically locks the screen when closing a laptop lid or after a period of user inactivity (as set with @code{xset s TIMEOUT}). The notifier command, if specified, is executed first. Additionally, xss-lock uses the inhibition logic to lock the screen before the system goes to sleep.") (home-page "https://bitbucket.org/raymonad/xss-lock") (license license:expat)))) (define-public python-pyperclip (package (name "python-pyperclip") (version "1.8.2") (source (origin (method url-fetch) (uri (pypi-uri "pyperclip" version)) (sha256 (base32 "0mxzm43z2anr55gyz7awagvam4d5c2rlxhp9hjyg0d29n2l58lhh")))) (build-system python-build-system) (arguments '(#:tests? #f)) ; Not clear how to make tests pass. (inputs (list xclip xsel)) (home-page "https://github.com/asweigart/pyperclip") (synopsis "Python clipboard module") (description "Pyperclip is a clipboard module for Python, handling copy/pasting from the X11 clipboard") (license license:bsd-3))) (define-public numlockx (package (name "numlockx") (version "1.2") (source (origin (method git-fetch) (uri (git-reference ;; It seems that upstream is gone. (url "https://github.com/rg3/numlockx") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1w49fayhwzn5rx0z1q2lrvm7z8jrd34lgb89p853a024bixc3cf2")))) (build-system gnu-build-system) (inputs (list xorg-server)) (home-page "https://github.com/rg3/numlockx") (synopsis "Turns on the numlock key in X11") (description "@command{numlockx} is a tiny program that lets you turn on the numlock key in X11. It can be called from the user's initialization files to automatically turn it on on login.") (license license:expat))) (define-public xrandr-invert-colors (package (name "xrandr-invert-colors") (version "0.02") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/zoltanp/xrandr-invert-colors") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0gk1fgxb2kjyr78xn8m0ckjdic99ras7msa67piwnhj3j4scg1ih")))) (build-system gnu-build-system) (arguments `(#:make-flags (list ,(string-append "CC=" (cc-for-target))) #:tests? #f ; there are none #:phases (modify-phases %standard-phases (delete 'configure) (replace 'install ;; It's simpler to install the single binary ourselves than to patch ;; the Makefile's install target into working. (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin"))) (mkdir-p bin) (copy-file "xrandr-invert-colors.bin" (string-append bin "/xrandr-invert-colors")))))))) (inputs (list libxrandr)) (home-page "https://github.com/zoltanp/xrandr-invert-colors") (synopsis "Invert display colors") (description "This package provides a small utility for inverting the colors on all monitors attached to an XRandR-capable X11 display server.") (license license:gpl3+))) (define-public sct (package (name "sct") (version "0.5") (source (origin (method url-fetch) (uri (string-append "https://www.umaxx.net/dl/sct-" version ".tar.gz")) (sha256 (base32 "0lrhx771iccbw04wrhj0ygids1pzmjfc4hvklm30m3p3flvhqf0m")))) (build-system gnu-build-system) (arguments `(#:make-flags (list ,(string-append "CC=" (cc-for-target))) #:tests? #f ; no test suite #:phases (modify-phases %standard-phases (delete 'configure) (add-after 'unpack 'fix-sctd-paths (lambda* (#:key outputs inputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (coreutils (assoc-ref inputs "coreutils")) (inetutils (assoc-ref inputs "inetutils")) (sed (assoc-ref inputs "sed"))) (substitute* "sctd.sh" (("\\$\\(which sct\\)") (string-append out "/bin/sct")) (("date") (string-append coreutils "/bin/date")) (("printf") (string-append coreutils "/bin/printf")) (("sleep") (string-append coreutils "/bin/sleep")) (("logger") (string-append inetutils "/bin/logger")) (("sed") (string-append sed "/bin/sed")))))) (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (install-file "sct" (string-append out "/bin")) (install-file "sctd.sh" (string-append out "/bin")) (install-file "sct.1" (string-append out "/man/man1")) (install-file "sctd.1" (string-append out "/man/man1")) (rename-file (string-append out "/bin/sctd.sh") (string-append out "/bin/sctd")) #t)))))) (inputs (list coreutils ; sctd uses "date", "printf" and "sleep" inetutils ; sctd uses "logger" libxrandr sed)) ; sctd uses "sed" (home-page "https://www.umaxx.net") (synopsis "Set the color temperature of the screen") (description "@code{sct} is a lightweight utility to set the color temperature of the screen.") (license (license:non-copyleft "file://sct.c")))) ; "OpenBSD" license (define-public xsecurelock (package (name "xsecurelock") (version "1.7.0") (source (origin (method url-fetch) (uri (string-append "https://github.com/google/xsecurelock/releases" "/download/v" version "/xsecurelock-" version ".tar.gz")) (sha256 (base32 "0s2q69g1xhvs18q2jhcval5vpa9j0kkrdv02r176vvxvdms7hhc7")))) (build-system gnu-build-system) (arguments '(#:configure-flags '("--with-pam-service-name=login" "--with-xkb" "--with-default-authproto-module=/run/setuid-programs/authproto_pam"))) (native-inputs (list pandoc pkg-config)) (inputs `(("fontconfig" ,fontconfig) ("libX11" ,libx11) ("libxcomposite" ,libxcomposite) ("libxext" ,libxext) ("libxfixes" ,libxfixes) ("libxft" ,libxft) ("libxmu" ,libxmu) ("libxrandr" ,libxrandr) ("libxscrnsaver" ,libxscrnsaver) ("linux-pam" ,linux-pam))) (home-page "https://github.com/google/xsecurelock") (synopsis "X11 screen lock utility with the primary goal of security") (description "@code{xsecurelock} is an X11 screen locker which uses a modular design to avoid the usual pitfalls of screen locking utility design. As a consequence of the modular design, the usual screen locker service shouldn't be used with @code{xsecurelock}. Instead, you need to add a helper binary to setuid-binaries: @example (setuid-programs (cons* (file-append xsecurelock \"/libexec/xsecurelock/authproto_pam\") %setuid-programs)) @end example") (license license:asl2.0))) (define-public wl-clipboard (package (name "wl-clipboard") (version "2.0.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/bugaevc/wl-clipboard") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0c4w87ipsw09aii34szj9p0xfy0m00wyjpll0gb0aqmwa60p0c5d")))) (build-system meson-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'unpack 'patch-file-names (lambda* (#:key inputs #:allow-other-keys) (substitute* (find-files "src" "\\.c$") (("\"(cat|rm)\"" _ command) (string-append "\"" (assoc-ref inputs "coreutils") "/bin/" command "\"")) (("\"xdg-mime\"") (string-append "\"" (assoc-ref inputs "xdg-utils") "/bin/xdg-mime\"")))))))) (native-inputs (list pkg-config)) (inputs (list coreutils wayland wayland-protocols xdg-utils)) (home-page "https://github.com/bugaevc/wl-clipboard") (synopsis "Command-line copy/paste utilities for Wayland") (description "Wl-clipboard is a set of command-line copy/paste utilities for Wayland.") (license license:gpl3+))) (define-public wl-clipboard-x11 (package (name "wl-clipboard-x11") (version "5") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/brunelli/wl-clipboard-x11") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1y7jv7rps0sdzmm859wn2l8q4pg2x35smcrm7mbfxn5vrga0bslb")))) (build-system copy-build-system) (arguments `(#:install-plan '(("src/" "bin/") ("man/" "man/man1")) #:phases (modify-phases %standard-phases (add-after 'install 'wrap-binary (lambda* (#:key inputs outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out")) (wl-clipboard (assoc-ref inputs "wl-clipboard"))) (wrap-program (string-append out "/bin/wl-clipboard-x11") `("PATH" prefix (,(string-append wl-clipboard "/bin"))))) #t)) (add-after 'wrap-binary 'symlink-utilities ;; As seen in the Makefile. (lambda* (#:key outputs #:allow-other-keys) (let ((bin (string-append (assoc-ref outputs "out") "/bin/"))) (symlink "wl-clipboard-x11" (string-append bin "xclip")) (symlink "wl-clipboard-x11" (string-append bin "xsel"))) #t))))) (inputs (list bash-minimal wl-clipboard)) (home-page "https://github.com/brunelli/wl-clipboard-x11") (synopsis "Use wl-clipboard as a drop-in replacement to X11 clipboard tools") (description "This package provides a wrapper script around @code{x11-clipboard} to use it as a clipboard on X11 also. It also contains helper scripts for @code{xclip} and @code{xsel} to assist with the transition.") (license license:gpl3+))) (define-public autocutsel (package (name "autocutsel") (version "0.10.1") (source (origin (method url-fetch) (uri (string-append "https://github.com/sigmike/autocutsel" "/releases/download/" version "/" "autocutsel-" version ".tar.gz")) (sha256 (base32 "05zb85imp42birvrc320q20r98qddc5vxx169dnl753l5za0czpi")))) (build-system gnu-build-system) (arguments '(#:tests? #f)) ; no "check" target (native-inputs (list libx11 libxaw)) (home-page "https://www.nongnu.org/autocutsel/") (synopsis "Automated X11 clipboard and cutbuffer synchronization") (description "@code{autocutsel} tracks changes in the server's cutbuffer and clipboard selection. When the clipboard is changed, it updates the cutbuffer. When the cutbuffer is changed, it owns the clipboard selection. The cutbuffer and clipboard selection are always synchronized.") (license license:gpl2+))) (define-public jgmenu (package (name "jgmenu") (version "4.4.0") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/johanmalm/jgmenu") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "08dyygclayyipa0p2qsxqa3fsfyflkrkhpi25dkc3ybkicvynk24")))) (build-system gnu-build-system) (native-inputs (list cppcheck perl pkg-config)) (inputs (list cairo glib librsvg libx11 libxml2 libxrandr pango)) (arguments `(#:test-target "test" #:phases (modify-phases %standard-phases (replace 'configure (lambda* (#:key outputs #:allow-other-keys) (setenv "CC" ,(cc-for-target)) (invoke "./configure" (string-append "--prefix=" (assoc-ref outputs "out"))) #t))))) (synopsis "Simple X11 menu") (description "This is a simple menu for X11 designed for scripting and tweaking. It can optionally use some appearance settings from XSettings, tint2 and GTK.") (home-page "https://jgmenu.github.io/") (license license:gpl2))) (define-public xwallpaper (package (name "xwallpaper") (version "0.7.3") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/stoeckmann/xwallpaper") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1rsv42cl0s149sbpdxz9yqqjip3si95jv3dglwzrcm7pjfg7519v")))) (build-system gnu-build-system) (native-inputs (list autoconf automake pkg-config)) (inputs (list libjpeg-turbo libpng libxpm pixman xcb-util xcb-util-image)) (home-page "https://github.com/stoeckmann/xwallpaper") (synopsis "Wallpaper setting utility for X") (description "The xwallpaper utility allows you to set image files as your X wallpaper. JPEG, PNG, and XPM file formats are supported. The wallpaper is also advertised to programs which support semi-transparent backgrounds.") (license license:isc))) (define-public xwrits (package (name "xwrits") (version "2.26") (source (origin (method url-fetch) (uri (string-append "https://www.lcdf.org/~eddietwo/xwrits/" "xwrits-" version ".tar.gz")) (sha256 (base32 "1n7y0fqpcvmzznvbsn14hzy5ddaa3lilm8aw6ckscqndnh4lijma")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (add-after 'install 'install-docs (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (doc (string-append out "/share/doc/xwrits"))) (install-file "GESTURES" doc) (install-file "README" doc) #t)))))) (inputs (list libx11 libxinerama)) (home-page "https://www.lcdf.org/~eddietwo/xwrits/") (synopsis "Reminds you to take wrist breaks") (description "Xwrits reminds you to take wrist breaks for prevention or management of repetitive stress injuries. When you should take a break, it pops up an X window, the warning window. You click on the warning window, then take a break. The window changes appearance while you take the break. It changes again when your break is over. Then you just resume typing. Xwrits hides itself until you should take another break.") (license license:gpl2))) (define-public xsettingsd (package (name "xsettingsd") (version "1.0.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/derat/xsettingsd") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "14gnkz18dipsa2v24f4nm9syxaa7g21iqjm7y65jn849ka2jr1h8")))) (build-system scons-build-system) (inputs (list libx11)) (native-inputs `(("pkg-config" ,pkg-config) ("googletest" ,googletest) ("googletest-source" ,(package-source googletest)))) (arguments `(#:scons ,scons-python2 #:scons-flags (list ,(string-append "CC=" (cc-for-target))) #:phases (modify-phases %standard-phases (add-before 'build 'patch-sconstruct (lambda* (#:key inputs #:allow-other-keys) (substitute* "SConstruct" ;; scons doesn't pick up environment variables automatically ;; so it needs help to find path variables (("env = Environment\\(") "env = Environment( ENV = { 'PATH': os.environ['PATH'], 'CPATH': os.environ['C_INCLUDE_PATH'], 'LIBRARY_PATH': os.environ['LIBRARY_PATH'], 'PKG_CONFIG_PATH': os.environ['PKG_CONFIG_PATH'] },") ;; Update path to gtest source files used in tests (("/usr/src/gtest") (string-append (assoc-ref inputs "googletest-source") "/googletest")) ;; Exclude one warning that causes a build error (("-Werror") "-Werror -Wno-error=sign-compare")) #t)) ;; The SConstruct script doesn't configure installation so ;; binaries must be copied to the output path directly (replace 'install (lambda* (#:key outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (man (string-append out "/share/man/man1"))) (mkdir-p bin) (install-file "xsettingsd" bin) (install-file "dump_xsettings" bin) (install-file "xsettingsd.1" man) (install-file "dump_xsettings.1" man) #t)))))) (home-page "https://github.com/derat/xsettingsd") (synopsis "Xorg settings daemon") (description "@command{xsettingsd} is a lightweight daemon that provides settings to Xorg applications via the XSETTINGS specification. It is used for defining font and theme settings when a complete desktop environment (GNOME, KDE) is not running. With a simple @file{.xsettingsd} configuration file one can avoid configuring visual settings in different UI toolkits separately.") (license license:bsd-3))) (define-public clipnotify (package (name "clipnotify") (version "1.0.2") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/cdown/clipnotify") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "1v3ydm5ljy8z1savmdxrjyx7a5bm5013rzw80frp3qbbjaci0wbg")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (replace 'install (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (doc (string-append %output "/share/doc/" ,name "-" ,version))) (install-file "clipnotify" bin) (install-file "README.md" doc) #t)))) #:make-flags (list ,(string-append "CC=" (cc-for-target))) #:tests? #f)) ; no test suite (inputs `(("libx11" ,libx11) ("libXfixes" ,libxfixes))) (home-page "https://github.com/cdown/clipnotify") (synopsis "Notify on new X clipboard events") (description "@command{clipnotify} is a simple program that, using the XFIXES extension to X11, waits until a new selection is available and then exits. It was primarily designed for clipmenu, to avoid polling for new selections. @command{clipnotify} doesn't try to print anything about the contents of the selection, it just exits when it changes. This is intentional -- X11's selection API is verging on the insane, and there are plenty of others who have already lost their sanity to bring us xclip/xsel/etc. Use one of those tools to complement clipnotify.") (license license:public-domain))) (define-public clipmenu (let ((commit "bcbe7b144598db4a103f14e8408c4b7327d6d5e1") (revision "1")) (package (name "clipmenu") (version (string-append "6.0.1-" revision "." (string-take commit 7))) (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/cdown/clipmenu") (commit commit))) (file-name (git-file-name name version)) (sha256 (base32 "0053j4i14lz5m2bzc5sch5id5ilr1bl196mp8fp0q8x74w3vavs9")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (delete 'build) (replace 'install (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (bin (string-append out "/bin")) (doc (string-append %output "/share/doc/" ,name "-" ,version))) (install-file "clipdel" bin) (install-file "clipmenu" bin) (install-file "clipmenud" bin) (install-file "README.md" doc) #t))) (add-after 'install 'wrap-script (lambda* (#:key inputs outputs #:allow-other-keys) (let* ((out (assoc-ref outputs "out")) (clipnotify (assoc-ref inputs "clipnotify")) (coreutils-minimal (assoc-ref inputs "coreutils-minimal")) (gawk (assoc-ref inputs "gawk")) (util-linux (assoc-ref inputs "util-linux")) (xdotool (assoc-ref inputs "xdotool")) (xsel (assoc-ref inputs "xsel")) (guile (search-input-file inputs "bin/guile"))) (for-each (lambda (prog) (wrap-script (string-append out "/bin/" prog) #:guile guile `("PATH" ":" prefix ,(map (lambda (dir) (string-append dir "/bin")) (list clipnotify coreutils-minimal gawk util-linux xdotool xsel))))) '("clipmenu" "clipmenud" "clipdel"))) #t)) (replace 'check (lambda* (#:key inputs outputs #:allow-other-keys) ;; substitute a shebang appearing inside a string (the test ;; file writes this string to a temporary file): (substitute* "tests/test-clipmenu" (("#!/usr/bin/env bash") (string-append "#!" (which "bash")))) (invoke "tests/test-clipmenu") #t))))) (inputs (list clipnotify coreutils-minimal gawk guile-3.0 ; for wrap-script util-linux xdotool xsel)) (home-page "https://github.com/cdown/clipmenu") (synopsis "Simple clipboard manager using dmenu or rofi and xsel") (description "Start @command{clipmenud}, then run @command{clipmenu} to select something to put on the clipboard. When @command{clipmenud} detects changes to the clipboard contents, it writes them out to the cache directory. @command{clipmenu} reads the cache directory to find all available clips and launches @command{dmenu} (or @command{rofi}, depending on the value of @code{CM_LAUNCHER}) to let the user select a clip. After selection, the clip is put onto the PRIMARY and CLIPBOARD X selections.") (license license:public-domain)))) (define-public kbdd (package (name "kbdd") (version "0.7.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/qnikst/kbdd") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "0qkq75grbd4wkx4nlvswgavpijk9ad0pzqyj89a0ayjsbsn36pqy")))) (build-system gnu-build-system) (native-inputs (list autoconf automake `(,glib "bin") pkg-config)) (inputs (list dbus-glib glib libx11)) (home-page "https://github.com/qnikst/kbdd") (synopsis "Per-window keyboard layout switching daemon for X") (description "@command{kbdd} is a simple keyboard layout switching program, which is designed to run in an X11 session and remember keyboard layouts on a per-window basis. That can be very handy for a user of a non-US keyboard who does not want to jump through layouts back and forth while typing in terminals (mostly in a latin alphabet) and some kind of chat (in native language). @command{kbdd} also supports D-Bus signals, which makes it possible to create layout indicator widgets.") (license license:bsd-2))) (define-public j4-dmenu-desktop (package (name "j4-dmenu-desktop") (version "2.18") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/enkore/j4-dmenu-desktop") (commit (string-append "r" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1gxpgifzy0hnpd0ymw3r32amzr32z3bgb90ldjzl438p6h1q0i26")))) (build-system cmake-build-system) (native-inputs (list catch-framework2)) (arguments `(#:configure-flags '("-DWITH_GIT_CATCH=off") #:phases (modify-phases %standard-phases (add-after 'unpack 'find-catch (lambda _ (substitute* "CMakeLists.txt" (("PATH_SUFFIXES catch") "PATH_SUFFIXES catch2")) #t)) (replace 'check (lambda _ (invoke "./j4-dmenu-tests" "exclude:SearchPath/XDG_DATA_HOME")))))) (synopsis "Fast desktop menu") (description "j4-dmenu-desktop is a replacement for i3-dmenu-desktop. Its purpose is to find @file{.desktop} files and offer you a menu to start an application using @command{dmenu}.") (home-page "https://github.com/enkore/j4-dmenu-desktop") (license license:gpl3+))) (define-public wofi (package (name "wofi") (version "1.2.4") (source (origin (method hg-fetch) (uri (hg-reference (url "https://hg.sr.ht/~scoopta/wofi") (changeset (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1bnf078fg1kwslzwm1mjxwcqqq3bhk1dzymwfw9gk3brqbxrl75c")))) (build-system meson-build-system) (arguments `(#:glib-or-gtk? #t)) (native-inputs (list pkg-config)) (inputs `(("gtk3" ,gtk+) ("wayland" ,wayland))) (synopsis "Launcher/menu program for wayland") (description "Wofi is a launcher/menu program for wlroots based wayland compositors such as sway, similar to @command{rofi}.") (home-page "https://hg.sr.ht/~scoopta/wofi") (license license:gpl3+))) (define-public dex (package (name "dex") (version "0.9.0") (source (origin (method git-fetch) (uri (git-reference (url (string-append "https://github.com/jceb/dex")) (commit (string-append "v" version)))) (sha256 (base32 "03aapcywnz4kl548cygpi25m8adwbmqlmwgxa66v4156ax9dqs86")) (file-name (git-file-name name version)))) (build-system gnu-build-system) (arguments `(#:make-flags (list (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure)) #:tests? #f)) (inputs (list python)) (native-inputs (list python-sphinx)) (home-page "https://github.com/jceb/dex") (synopsis "Execute DesktopEntry files") (description "@command{dex}, @dfn{DesktopEntry Execution}, is a program to generate and execute @file{.desktop} files of the Application type.") (license license:gpl3+))) (define-public sx (package (name "sx") (version "2.1.7") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/Earnestly/sx") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0xv15m30nhcknasqiybj5wwf7l91q4a4jf6xind8x5x00c6br6nl")))) (build-system gnu-build-system) (arguments '(#:tests? #f ; no tests #:make-flags (let ((out (assoc-ref %outputs "out"))) (list (string-append "PREFIX=" out))) #:phases (modify-phases %standard-phases (add-after 'unpack 'refer-to-xauth (lambda* (#:key inputs #:allow-other-keys) (substitute* "sx" (("\\bxauth\\b" command) (string-append (assoc-ref inputs "xauth") "/bin/" command))))) (delete 'configure)))) ; no configure script (inputs (list xauth)) (home-page "https://github.com/Earnestly/sx") (synopsis "Start an xorg server") (description "@command{sx} is a simple alternative to both @command{xinit} and @command{startx} for starting an Xorg server.") (license license:x11))) (define-public hsetroot (package (name "hsetroot") (version "1.0.5") (home-page "https://github.com/himdel/hsetroot") (source (origin (method git-fetch) (file-name (git-file-name name version)) (uri (git-reference (url home-page) (commit version))) (sha256 (base32 "1jbk5hlxm48zmjzkaq5946s58rqwg1v1ds2sdyd2ba029hmvr722")))) (build-system gnu-build-system) (arguments `(#:tests? #f #:make-flags (list ,(string-append "CC=" (cc-for-target)) (string-append "PREFIX=" (assoc-ref %outputs "out"))) #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'install 'mkdir-install-path (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (mkdir-p (string-append out "/bin")))))))) (inputs (list libx11 imlib2 libxinerama)) (native-inputs (list pkg-config)) (synopsis "Imlib2-based wallpaper changer") (description "The @command{hsetroot} command composes wallpapers for X. This package is the fork of hsetroot by Hyriand.") (license license:gpl2+))) (define-public jumpapp (package (name "jumpapp") (version "1.1") (source (origin (method git-fetch) (uri (git-reference (url "https://github.com/mkropat/jumpapp") (commit (string-append "v" version)))) (file-name (git-file-name name version)) (sha256 (base32 "1jrk4mm42sz6ca2gkb6w3dad53d4im4shpgsq8s4vr6xpl3b43ry")))) (build-system gnu-build-system) (arguments `(#:phases (modify-phases %standard-phases (delete 'configure) (delete 'check) (add-before 'install 'set-prefix-in-makefile (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (substitute* "Makefile" (("PREFIX =.*") (string-append "PREFIX = " out "\n"))) #true)))))) (propagated-inputs (list wmctrl xdotool xprop)) (native-inputs (list pandoc perl)) (synopsis "Run-or-raise application switcher for any X11 desktop") (description "Bind a key for any given application that will launch the application, if it's not already running, or focus the application's window,if it is running. Pressing the key again will cycle to the application's next window, if there's more than one.") (home-page "https://github.com/mkropat/jumpapp") (license license:expat))) (define-public xkbset (package (name "xkbset") (version "0.6") (source (origin (method url-fetch) (uri (string-append "https://faculty.missouri.edu/~stephen/software/" name "/" name "-" version ".tar.gz")) (sha256 (base32 "199mlm127zk1lr8nrq22n68l2l8cjwc4cgwd67rg1i6497n2y0xc")))) (build-system gnu-build-system) (inputs (list libx11 perl perl-tk)) (arguments `(#:tests? #f ; There are none. #:make-flags `(,,(string-append "CC=" (cc-for-target)) ,(string-append "X11PREFIX=" %output) ,(string-append "X11BASE=" (assoc-ref %build-inputs "libx11")) ,(string-append "INSTALL_MAN1=" %output "/share/man/man1")) #:phases (modify-phases %standard-phases (delete 'configure) (add-before 'install 'create-install-directories (lambda* (#:key outputs #:allow-other-keys) (let ((out (assoc-ref outputs "out"))) (mkdir-p out) (with-directory-excursion out (for-each mkdir-p '("bin" "share/man/man1")))) #t)) (add-after 'install 'wrap-perl-script (lambda* (#:key outputs #:allow-other-keys) (wrap-program (string-append (assoc-ref outputs "out") "/bin/xkbset-gui") `("PERL5LIB" ":" prefix (,(getenv "PERL5LIB")))) #t)) (replace 'install-license-files (lambda* (#:key outputs #:allow-other-keys) (install-file "COPYRIGHT" (string-append (assoc-ref outputs "out") "/share/doc/" ,name "-" ,version)) #t))))) (home-page "https://faculty.missouri.edu/~stephen/software/") (synopsis "User-preference utility for XKB extensions for X") (description "This is a program to help manage many of the XKB features of the X Window System. This includes such features as MouseKeys, AccessX, StickyKeys, BounceKeys, and SlowKeys. It includes a graphical program to help with MouseKeys-acceleration management.") (license license:bsd-3))) (define-public wlsunset (package (name "wlsunset") (version "0.2.0") (source (origin (method git-fetch) (uri (git-reference (url "https://git.sr.ht/~kennylevinsen/wlsunset/") (commit version))) (file-name (git-file-name name version)) (sha256 (base32 "0hhsddh3rs066rbsjksr8kcwg8lvglbvs67dq0r5wx5c1xcwb51w")))) (build-system meson-build-system) (inputs (list wayland wayland-protocols)) (native-inputs (list pkg-config)) (synopsis "Day/night gamma adjustments for Wayland compositors") (home-page "https://sr.ht/~kennylevinsen/wlsunset/") (description "wlunset adjusts gamma based on day-night cycles on Wayland compositors that support @samp{wlr-gamma-control-unstable-v1}. It is also known as a blue light filter or night light.") (license license:expat)))