Gnome dans core-updates

[Andreas Enge <andreas@enge.fr>]

Hello,

today I have compiled a maximum of inputs for gnome on berlin. Here is
what is missing:
The following derivations would be built:
  /gnu/store/1f71al4jx8pn7qnpp94642pvf6m4la5m-gnome-42.4.drv
  /gnu/store/4yvabkw23pwmxcanvl1qn8ch9jak7py4-packagekit-1.2.5.drv
  /gnu/store/pvbdfrkp0bq8n0hvnikjasccjly3vq3s-gnome-boxes-43.3.drv
  /gnu/store/0i008ksb4war4iglqcrhnypnnjiv3mgq-spice-gtk-0.42.drv
  /gnu/store/sv800qqkvz6l2y54rp4jfrbqva8zhr52-libcacard-2.8.1.drv
  /gnu/store/ry2kqxfgghknlykwjssz0xdakaiq83d5-qemu-minimal-7.2.0.drv
  /gnu/store/n6ssj7g7ha48kqb7x0vlksaxrd02q2f3-opensbi-qemu-1.1.drv
  /gnu/store/a5bk00q2m7k41fmafyqx7ndhgxn8p92p-opensbi-generic-1.1.drv
  /gnu/store/vn01aaqcd9wmxb8hc8c9wsav89mbjyxy-ipxe-qemu-1.21.1.drv
  /gnu/store/q838z0f92dbll0cr4xb4dgbzqyfdb51b-system-config-printer-1.5.16.drv
  /gnu/store/y3qcrzl8c8746z3g95jip95728xckzyv-gnome-initial-setup-42.2.drv

Substitutes for all other inputs should be available on berlin.

If someone knowledgeable with Gnome could have a look, that would be great!

Below a few more details.

Andreas


packagekit fails its installation phase (!) like so:
/gnu/store/xrn2zn2ky4jkigg2cal0g8sacpkfai9m-meson-0.63.2/bin/meson install --no-rebuild
ninja: build stopped: subcommand failed.
error: in phase 'install': uncaught exception:
%exception #<&invoke-error program: "ninja" arguments: ("install") exit-status: 1 term-signal: #f stop-signal: #f>
phase `install' failed after 0.3 seconds
command "ninja" "install" failed with status 1
builder for `/gnu/store/4yvabkw23pwmxcanvl1qn8ch9jak7py4-packagekit-1.2.5.drv' failed with exit code 1
build of /gnu/store/4yvabkw23pwmxcanvl1qn8ch9jak7py4-packagekit-1.2.5.drv failed
View build log at '/var/log/guix/drvs/4y/vabkw23pwmxcanvl1qn8ch9jak7py4-packagekit-1.2.5.drv.gz'.


libcacard fails validate-runpath:
starting phase `validate-runpath'
validating RUNPATH of 1 binaries in "/gnu/store/29kdbd1q8lkyyr7apzczx53683mr0yhz-libcacard-2.8.1/lib"...
/gnu/store/29kdbd1q8lkyyr7apzczx53683mr0yhz-libcacard-2.8.1/lib/libcacard.so: error: depends on 'libnss3.so', which cannot be found in RUNPATH ("/gnu/store/gsjczqir1wbz8p770zndrpw4rnppmxi3-glibc-2.35/lib" "/gnu/store/mw4l4bap7xw3s4v9j4v395qp2n4gz3x4-glib-2.72.3/lib" "/gnu/store/jxkn98nnk2pv3fy7cx2baaynkr4c63wp-nspr-4.35/lib" "/gnu/store/x22qi9rkzdb8pafcv78wb5nayph9m1d9-pcsc-lite-1.9.8/lib")
error: in phase 'validate-runpath': uncaught exception:
misc-error #f "RUNPATH validation failed" () #f
phase `validate-runpath' failed after 0.0 seconds
Backtrace:
           8 (primitive-load "/gnu/store/x2685x6mv5lcxf2l7idg1y5w7wb…")
In guix/build/gnu-build-system.scm:
    908:2  7 (gnu-build #:source _ #:outputs _ #:inputs _ #:phases . #)
In ice-9/boot-9.scm:
  1752:10  6 (with-exception-handler _ _ #:unwind? _ # _)
In srfi/srfi-1.scm:
    634:9  5 (for-each #<procedure 7ffff4efc0c0 at guix/build/gnu-b…> …)
In ice-9/boot-9.scm:
  1752:10  4 (with-exception-handler _ _ #:unwind? _ # _)
In guix/build/gnu-build-system.scm:
   929:23  3 (_)
   570:10  2 (validate-runpath #:validate-runpath? _ # _ #:outputs _)
In ice-9/boot-9.scm:
  1685:16  1 (raise-exception _ #:continuable? _)
  1685:16  0 (raise-exception _ #:continuable? _)
ice-9/boot-9.scm:1685:16: In procedure raise-exception:
RUNPATH validation failed
builder for `/gnu/store/sv800qqkvz6l2y54rp4jfrbqva8zhr52-libcacard-2.8.1.drv' failed with exit code 1
build of /gnu/store/sv800qqkvz6l2y54rp4jfrbqva8zhr52-libcacard-2.8.1.drv failed
View build log at '/var/log/guix/drvs/sv/800qqkvz6l2y54rp4jfrbqva8zhr52-libcacard-2.8.1.drv.gz'.
We have
    (propagated-inputs
     (list ...
           nss
and
    (native-inputs
     (list ...
           `(,nss "bin")
It looks like we need some of nss (the "normal" output, not "bin") as a
standard input. I will give it a try.


opensbi-generic fails in the build phase:
error: in phase 'build': uncaught exception:
%exception #<&invoke-error program: "make" arguments: ("-j" "4" "PLATFORM=generic" "CROSS_COMPILE=riscv64-linux-gnu-" "FW_PAYLOAD=n" "V=1") exit-status: 2 term-signal: #f stop-signal: #f>
phase `build' failed after 3.8 seconds
command "make" "-j" "4" "PLATFORM=generic" "CROSS_COMPILE=riscv64-linux-gnu-" "FW_PAYLOAD=n" "V=1" failed with status 2
builder for `/gnu/store/a5bk00q2m7k41fmafyqx7ndhgxn8p92p-opensbi-generic-1.1.drv' failed with exit code 1
build of /gnu/store/a5bk00q2m7k41fmafyqx7ndhgxn8p92p-opensbi-generic-1.1.drv failed
View build log at '/var/log/guix/drvs/a5/bk00q2m7k41fmafyqx7ndhgxn8p92p-opensbi-generic-1.1.drv.gz'.
In the build log, there is this:
/tmp/guix-build-opensbi-generic-1.1.drv-0/source/lib/sbi/sbi_tlb.c:190: Error: unrecognized opcode `fence.i'
make: *** [Makefile:442: /tmp/guix-build-opensbi-generic-1.1.drv-0/source/build/lib/sbi/sbi_tlb.o] Error 1
That looks serious.


ipxe-qemu also fails its build phase:
In file included from tests/bigint_test.c:38:
tests/bigint_test.c: In function ‘bigint_test_exec’:
tests/bigint_test.c:232:14: error: ‘result_raw’ may be used uninitialized [-Werror=maybe-uninitialized]
cc1: all warnings being treated as errors
View build log at '/var/log/guix/drvs/vn/01aaqcd9wmxb8hc8c9wsav89mbjyxy-ipxe-qemu-1.21.1.drv.gz'.
Well, compiling everything with "-Werror" is okay when the authors want to
test their code, but maybe overkill in a release?


The others fail because they have one of the above as inputs.