* [aarch64] sbcl build failure
@ 2021-03-30 22:15 Vincent Legoll
2021-03-31 5:26 ` Leo Famulari
0 siblings, 1 reply; 4+ messages in thread
From: Vincent Legoll @ 2021-03-30 22:15 UTC (permalink / raw)
To: guix-devel
Hello,
I'm looking at the following cl-zstd build failure:
https://ci.guix.gnu.org/build/133326/details
which is caused by sbcl build failure that I
reproduced locally.
I diffed the CI build log output with my local
attempt and got the same thing modulo timings
[1] and other harmless stuff.
[1] the Odroid N2 looks roughly 3x faster than the CI
on this specific build / test (total 30 mins vs 90).
--
Vincent Legoll
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [aarch64] sbcl build failure
2021-03-30 22:15 [aarch64] sbcl build failure Vincent Legoll
@ 2021-03-31 5:26 ` Leo Famulari
2021-03-31 15:29 ` Leo Famulari
0 siblings, 1 reply; 4+ messages in thread
From: Leo Famulari @ 2021-03-31 5:26 UTC (permalink / raw)
To: Vincent Legoll; +Cc: guix-devel
On Wed, Mar 31, 2021 at 12:15:01AM +0200, Vincent Legoll wrote:
> I'm looking at the following cl-zstd build failure:
> https://ci.guix.gnu.org/build/133326/details
> which is caused by sbcl build failure that I
> reproduced locally.
During the recent staging cycle, I noticed a huge number of SBCL build
failures, especially when emulating aarch64 on x86_64.
> I diffed the CI build log output with my local
> attempt and got the same thing modulo timings
> [1] and other harmless stuff.
>
> [1] the Odroid N2 looks roughly 3x faster than the CI
> on this specific build / test (total 30 mins vs 90).
If it was an emulated build, that's more or less expected. The emulation
is very slow.
Comparing the Overdrive 1000 (4 x Cortex-A57, 25 watts TDP) to the
Odroid N2 (4 x Cortex-A73 and 2 x Cortex-A53, only 5 watts TDP), I'd
guess the Overdrive will complete the compilation more quickly, despite
the older design and lower core count.
I'm retrying the build now on one of the Overdrives.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [aarch64] sbcl build failure
2021-03-31 5:26 ` Leo Famulari
@ 2021-03-31 15:29 ` Leo Famulari
2021-03-31 15:54 ` Pierre Neidhardt
0 siblings, 1 reply; 4+ messages in thread
From: Leo Famulari @ 2021-03-31 15:29 UTC (permalink / raw)
To: Vincent Legoll; +Cc: guix-devel
On Wed, Mar 31, 2021 at 01:26:20AM -0400, Leo Famulari wrote:
> > I'm looking at the following cl-zstd build failure:
> > https://ci.guix.gnu.org/build/133326/details
> > which is caused by sbcl build failure that I
> > reproduced locally.
Unfortunately, the build failed on the Overdrive 1000, basically as
shown in the build log of job 133326:
------
//testing for consistency of first and second GENESIS passes
//header files match between first and second GENESIS -- good
real 38m6.607s
user 35m38.723s
sys 2m26.799s
//entering make-target-2.sh
//doing warm init - compilation phase
This is SBCL 2.1.3, an implementation of ANSI Common Lisp.
More information about SBCL is available at <http://www.sbcl.org/>.
SBCL is free software, provided as is, with absolutely no warranty.
It is mostly in the public domain; some portions are provided under
BSD-style licenses. See the CREDITS and COPYING files in the
distribution for more information.
Initial page table:
Gen Boxed Code Raw LgBox LgCode LgRaw Pin Alloc Waste Trig WP GCs Mem-age
6 398 251 0 0 0 0 0 42470112 62752 2000000 649 0 0.0000
Total bytes allocated = 42470112
Dynamic-space-size bytes = 3221225472
COLD-INIT... (Length(TLFs)= 9815)
Argh! corrupted error depth, halting
fatal error encountered in SBCL pid 579 tid 579:
%PRIMITIVE HALT called; the party is over.
Error opening /dev/tty: No such device or address
Welcome to LDB, a low-level debugger for the Lisp runtime environment.
ldb>
real 0m0.186s
user 0m0.145s
sys 0m0.041s
command "sh" "make.sh" "clisp" "--prefix=/gnu/store/p4pwjnbh197g5s5h7axklk2f1wwhx9gh-sbcl-2.1.3" "--dynamic-space-size=3072" "--with-sb-core-compression" "--with-sb-xref-for-internals" failed with status 1
builder for `/gnu/store/zij71vlv5a93qs2bmz29qwy1byz076iy-sbcl-2.1.3.drv' failed with exit code 1
-----
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [aarch64] sbcl build failure
2021-03-31 15:29 ` Leo Famulari
@ 2021-03-31 15:54 ` Pierre Neidhardt
0 siblings, 0 replies; 4+ messages in thread
From: Pierre Neidhardt @ 2021-03-31 15:54 UTC (permalink / raw)
To: Leo Famulari, Vincent Legoll; +Cc: guix-devel
[-- Attachment #1: Type: text/plain, Size: 164 bytes --]
You can try two things:
- Does version 2.1.2 work?
- Can you try bootstrapping SBCL with ECL instead of CLISP?
--
Pierre Neidhardt
https://ambrevar.xyz/
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 511 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-31 16:04 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-30 22:15 [aarch64] sbcl build failure Vincent Legoll
2021-03-31 5:26 ` Leo Famulari
2021-03-31 15:29 ` Leo Famulari
2021-03-31 15:54 ` Pierre Neidhardt
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).