DDR Version 1.20 20190314 In channel 0 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 400MHz 0,1 channel 0 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x98 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 CS = 1 MR0=0x18 MR4=0x1 MR5=0xFF MR8=0x8 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 800MHz 1,0 Channel 0: LPDDR4,800MHz Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB Channel 1: LPDDR4,800MHz Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB 256B stride ch 0 ddrconfig = 0x101, ddrsize = 0x2020 ch 1 ddrconfig = 0x101, ddrsize = 0x2020 pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD OUT Boot1: 2019-03-14, version: 1.19 CPUId = 0x0 ChipType = 0x10, 251 SdmmcInit=2 0 BootCapSize=100000 UserCapSize=119276MB FwPartOffset=2000 , 100000 mmc0:cmd5,20 SdmmcInit=0 0 BootCapSize=0 UserCapSize=30528MB FwPartOffset=2000 , 0 StorageInit ok = 191888 SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit read PBA: 0x1404 SecureInit read PBA: 0x1804 SecureInit read PBA: 0x1c04 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT 0x3380ec0 signature is wrong recovery gpt... GPT 0x3380ec0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 LoadTrust Addr:0x4400 LoadTrust Addr:0x4800 LoadTrust Addr:0x4c00 LoadTrust Addr:0x5000 LoadTrust Addr:0x5400 LoadTrust Addr:0x5800 LoadTrust Addr:0x5c00 Addr:0x4000 No find trust.img! LoadTrustBL error:-3 SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit read PBA: 0x1004 SecureInit read PBA: 0x1404 SecureInit read PBA: 0x1804 SecureInit read PBA: 0x1c04 SecureInit ret = 0, SecureMode = 0 atags_set_bootdev: ret:(0) GPT 0x3380ec0 signature is wrong recovery gpt... GPT 0x3380ec0 signature is wrong recovery gpt fail! LoadTrust Addr:0x4000 No find bl30.bin No find bl32.bin Load uboot, ReadLba = 2000 Load OK, addr=0x200000, size=0xe5970 RunBL31 0x10000 NOTICE: BL31: v1.3(debug):22b599a NOTICE: BL31: Built : 11:03:32, Jul 10 2019 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1181): pd status 3e INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 fdtdec_get_addr_size_fixed: reg: addr=ff770000, size=10000 fdtdec_get_addr_size_fixed: reg: addr=ff320000, size=1000 U-Boot 2017.09-04112-gb8e0774-dirty (Feb 07 2020 - 12:45:13 -0500) Model: Pine64 RK3399 Pinebook Pro PreSerial: 2 DRAM: 3.9 GiB Sysmem: init Relocation Offset: f5be7000, fdt: f3dd2238 I2c0 speed: 400000Hz PMIC: RK808 vdd_center 900000 uV vdd_log init 900000 uV rk_board_init PWM2 pinctrl init fail! rk_board_init: vcc3v0_sdio cannot set regulator value -38 vdd_center 900000 uV DCDC_REG1@ vdd_center: 750000uV <-> 1400000uV, set 900000uV, enabling | suspend -61uV, disabled DCDC_REG4@ vcc_1v8: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling LDO_REG1@ vcc1v8_dvp: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling LDO_REG4@ vcc_sd: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend 3300000uV, enabling LDO_REG5@ vcca3v0_codec: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend 3000000uV, enabling LDO_REG7@ vcca1v8_codec: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend 1800000uV, enabling LDO_REG8@ vcc_3v0: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend 3000000uV, enabling SWITCH_REG2@ vcc3v3_s0: -61uV <-> -61uV, set 0uV, enabling | suspend -61uV, disabled dc-12v@ dc_12v: 12000000uV <-> 12000000uV, set 12000000uV, enabling | suspend -61uV, enabling (ret: -38) vcc-sys@ vcc_sys: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61uV, enabling (ret: -38) vcc3v3-sys@ vcc3v3_sys: 3300000uV <-> 3300000uV, set 3300000uV, enabling | suspend -61uV, enabling (ret: -38) vcc-phy-regulator@ vcc_phy: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling led-regulator@ led_regulator: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling vcc5v0-host-en@ vcc5v0_host: 5000000uV <-> 5000000uV, set 5000000uV, enabling | suspend -61uV, enabling (ret: -38) vcc5v0-usb3-host-regulator@vcc5v0_usb3_host: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling vcc5v0-typec0-en@ vcc5v0_typec0: -61uV <-> -61uV, set -61uV, enabling | suspend -61uV, enabling vcc3v3-pcie-regulator@ vcc3v3_pcie: 3300000uV <-> 3300000uV, set 3300000uV, disabled | suspend -61uV, enabling vcc1v8-sdio@ vcc1v8_sdio: 1800000uV <-> 1800000uV, set 1800000uV, enabling | suspend -61uV, enabling (ret: -38) vcc3v0-sdio@ vcc3v0_sdio: 3000000uV <-> 3000000uV, set 3000000uV, enabling | suspend -61uV, enabling ; init 3000000uV (ret: -38) vdd_log init 900000 uV vdd_log@ vdd_log: 800000uV <-> 1400000uV, set 900000uV, enabling | suspend -61uV, enabling ; init 900000uV MMC: dwmmc@fe310000: 2, sdhci@fe330000: 0, dwmmc@fe320000: 1 Invalid bus 0 (err=-19) *** Warning - spi_flash_probe_bus_cs() failed, using default environment In: serial Out: serial Err: serial Model: Pine64 RK3399 Pinebook Pro RKPARM: Invalid parameter part table Bootdev(atags): mmc 0 PartType: DOS rockchip_get_boot_mode: Could not found misc partition boot mode: None init_resource_list: failed to get resource part, ret=-1 Can't find file:logo.bmp failed to display uboot logo CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A) CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A) aplll 816000 KHz apllb 816000 KHz dpll 800000 KHz cpll 24000 KHz gpll 800000 KHz npll 600000 KHz vpll 24000 KHz aclk_perihp 133333 KHz hclk_perihp 66666 KHz pclk_perihp 33333 KHz aclk_perilp0 266666 KHz hclk_perilp0 88888 KHz pclk_perilp0 44444 KHz hclk_perilp1 100000 KHz pclk_perilp1 50000 KHz Net: No ethernet found. Hit key to stop autoboot('CTRL+C'): 0 do_boot_rockchip: Could not find mmcsda2 part Checking for mmc dev 1... RKPARM: Invalid parameter part table switch to partitions #0, OK mmc1 is current device Scanning mmc 1 for bootable partitions... Scanning mmc 1:1 for extlinux or boot scripts... Found /boot/extlinux/extlinux.conf Retrieving file: /boot/extlinux/extlinux.conf 758 bytes read in 14 ms (52.7 KiB/s) Ignoring unknown command: UI GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: help hgvhgelp not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: help help not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: edit edit not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: not found GNU Guix Boot Options 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Enter choice: 1 1: GNU with Linux-Libre-Arm64-Generic 5.10.7 Retrieving file: /gnu/store/i35q3qw8plpn3b15f94g0iwqsrzcxj9q-raw-initrd/initrd.cpio.gz 13074541 bytes read in 963 ms (12.9 MiB/s) Retrieving file: /gnu/store/rnjk2q8vf6lpfxsm2svp6k06c7aww9kn-linux-libre-arm64-generic-5.10.7/Image 31760896 bytes read in 7494 ms (4 MiB/s) append: --root=38af4c98-52f4-b4e1-b285-334638af4c98 --system=/gnu/store/8da8n1qsdzspbhahp1jyyvkjvf33nza9-system --load=/gnu/store/8da8n1qsdzspbhahp1jyyvkjvf33nza9-system/boot modprobe.blacklist=usbmouse,usbkbd quiet Retrieving file: /gnu/store/rnjk2q8vf6lpfxsm2svp6k06c7aww9kn-linux-libre-arm64-generic-5.10.7/lib/dtbs/rk3399-pinebook-pro.dtb ** File not found /gnu/store/rnjk2q8vf6lpfxsm2svp6k06c7aww9kn-linux-libre-arm64-generic-5.10.7/lib/dtbs/rk3399-pinebook-pro.dtb ** Searching rockchip folder... Retrieving file: /gnu/store/rnjk2q8vf6lpfxsm2svp6k06c7aww9kn-linux-libre-arm64-generic-5.10.7/lib/dtbs/rockchip/rk3399-pinebook-pro.dtb 60504 bytes read in 677 ms (86.9 KiB/s) ## Flattened Device Tree blob at 08300000 Booting using the fdt blob at 0x8300000 Loading Ramdisk to f3156000, end f3dce06d ... OK Loading Device Tree to 00000000f3144000, end 00000000f3155c57 ... OK Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000) Total: 368418.864 ms Starting kernel ...