* guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II @ 2024-11-30 20:18 Tobias Alexandra Platen 2024-11-30 20:59 ` Ian Eure 0 siblings, 1 reply; 5+ messages in thread From: Tobias Alexandra Platen @ 2024-11-30 20:18 UTC (permalink / raw) To: guix-devel When I try to install Kicad, I'll get the following output: The following derivations will be built: /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- 0.5b6f8b5.drv /gnu/store/x26zsx3fw74vhfc35i79fansmlmhl0cc-libfabric-1.22.0.drv /gnu/store/nfj2qvhyxvfc7x5fkdlyg2z1wnpqw9cz-openmpi-4.1.6.drv /gnu/store/l1rbmwj9m4kgkm1qada665mm0m6g10w1-libngspice-43.drv /gnu/store/y88c48hzcm78ch39wjfa3dpdgw9n6m7r-webkitgtk-with-libsoup2- 2.44.1.drv /gnu/store/qv0zpz8h2dvhbmxz6smsbmc763rdkdxm-wxwidgets-3.2.5.drv /gnu/store/llydl3baxardzgf9xmdbgjikny68vaar-python-wxpython-4.2.0.drv /gnu/store/b0s2jgimknw6035kcqvpb6sdxkhakz7b-kicad-7.0.11.drv After a few minutes the build fails with: building /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- 0.5b6f8b5.drv... \ 'build' phasebuilder for `/gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- 0.5b6f8b5.drv' failed with exit code 1 build of /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- 0.5b6f8b5.drv failed View build log at '/var/log/guix/drvs/5r/inv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- 0.5b6f8b5.drv.gz'. ........ CC utils/read_lat.o ........ #error "Unsupported CPU architecture" I also found a blogpost which mentions libcxi, what does libcxi do? https://hpc.guix.info/blog/2024/11/targeting-the-crayhpe-slingshot-interconnect/ I guess that libcxi is optional for Kicad, so I could hack guix to build Kicad without libcxi. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II 2024-11-30 20:18 guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II Tobias Alexandra Platen @ 2024-11-30 20:59 ` Ian Eure 2024-12-01 11:54 ` Tobias Alexandra Platen 2024-12-01 13:50 ` Efraim Flashner 0 siblings, 2 replies; 5+ messages in thread From: Ian Eure @ 2024-11-30 20:59 UTC (permalink / raw) To: guix-devel Hi Tobias, On Sat, Nov 30, 2024, at 8:18 PM, Tobias Alexandra Platen wrote: > When I try to install Kicad, I'll get the following output: > > The following derivations will be built: > /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > 0.5b6f8b5.drv > /gnu/store/x26zsx3fw74vhfc35i79fansmlmhl0cc-libfabric-1.22.0.drv > /gnu/store/nfj2qvhyxvfc7x5fkdlyg2z1wnpqw9cz-openmpi-4.1.6.drv > /gnu/store/l1rbmwj9m4kgkm1qada665mm0m6g10w1-libngspice-43.drv > /gnu/store/y88c48hzcm78ch39wjfa3dpdgw9n6m7r-webkitgtk-with-libsoup2- > 2.44.1.drv > /gnu/store/qv0zpz8h2dvhbmxz6smsbmc763rdkdxm-wxwidgets-3.2.5.drv > /gnu/store/llydl3baxardzgf9xmdbgjikny68vaar-python-wxpython-4.2.0.drv > /gnu/store/b0s2jgimknw6035kcqvpb6sdxkhakz7b-kicad-7.0.11.drv > > After a few minutes the build fails with: > > building /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > 0.5b6f8b5.drv... > \ 'build' phasebuilder for > `/gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > 0.5b6f8b5.drv' failed with exit code 1 > build of /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > 0.5b6f8b5.drv failed > View build log at > '/var/log/guix/drvs/5r/inv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > 0.5b6f8b5.drv.gz'. > ........ > CC utils/read_lat.o > ........ > #error "Unsupported CPU architecture" > > I also found a blogpost which mentions libcxi, what does libcxi do? > https://hpc.guix.info/blog/2024/11/targeting-the-crayhpe-slingshot-interconnect/ > The package description provides a pretty good summary: Interface to the Cassini/Slingshot high-speed interconnect Libcxi provides applications with a low-level interface to the Cray/HPE Cassini high-speed NIC (network interface controller), also known as Slingshot. > I guess that libcxi is optional for Kicad, so I could hack guix to > build Kicad without libcxi. > I think this is worth a bug report, and maybe you're also up to sending some patches? I think it's slightly more complicated than just the kicad package, though, since libcxi isn't a direct dependency: $ guix graph --path kicad libcxi kicad@7.0.11 libngspice@43 openmpi@4.1.6 libfabric@1.22.0 libcxi@1.0.1-0.5b6f8b5 So, I think what needs to happen is that libcxi needs to have POWER9 removed from its supported-systems field; and libfabric needs to conditionally include libcxi in its inputs based on architecture. I think the best way to do that is by checking for the build system in (package-supported-systems libcxi), which will avoid hardcoding duplicate arch tests in two packages. -- Ian ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II 2024-11-30 20:59 ` Ian Eure @ 2024-12-01 11:54 ` Tobias Alexandra Platen 2024-12-01 13:50 ` Efraim Flashner 1 sibling, 0 replies; 5+ messages in thread From: Tobias Alexandra Platen @ 2024-12-01 11:54 UTC (permalink / raw) To: Ian Eure, guix-devel On Sat, 2024-11-30 at 20:59 +0000, Ian Eure wrote: > Hi Tobias, > > On Sat, Nov 30, 2024, at 8:18 PM, Tobias Alexandra Platen wrote: > > When I try to install Kicad, I'll get the following output: > > > > The following derivations will be built: > > /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv > > /gnu/store/x26zsx3fw74vhfc35i79fansmlmhl0cc-libfabric-1.22.0.drv > > /gnu/store/nfj2qvhyxvfc7x5fkdlyg2z1wnpqw9cz-openmpi-4.1.6.drv > > /gnu/store/l1rbmwj9m4kgkm1qada665mm0m6g10w1-libngspice-43.drv > > /gnu/store/y88c48hzcm78ch39wjfa3dpdgw9n6m7r-webkitgtk-with- > > libsoup2- > > 2.44.1.drv > > /gnu/store/qv0zpz8h2dvhbmxz6smsbmc763rdkdxm-wxwidgets-3.2.5.drv > > /gnu/store/llydl3baxardzgf9xmdbgjikny68vaar-python-wxpython- > > 4.2.0.drv > > /gnu/store/b0s2jgimknw6035kcqvpb6sdxkhakz7b-kicad-7.0.11.drv > > > > After a few minutes the build fails with: > > > > building /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv... > > \ 'build' phasebuilder for > > `/gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv' failed with exit code 1 > > build of /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv failed > > View build log at > > '/var/log/guix/drvs/5r/inv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv.gz'. > > ........ > > CC utils/read_lat.o > > ........ > > #error "Unsupported CPU architecture" > > > > I also found a blogpost which mentions libcxi, what does libcxi do? > > https://hpc.guix.info/blog/2024/11/targeting-the-crayhpe-slingshot-interconnect/ > > > > The package description provides a pretty good summary: > > Interface to the Cassini/Slingshot high-speed interconnect > > Libcxi provides applications with a low-level interface to > the > Cray/HPE Cassini high-speed NIC (network interface > controller), also > known as Slingshot. > > > I guess that libcxi is optional for Kicad, so I could hack guix to > > build Kicad without libcxi. Since I do not have that interconnect I would make it optional. The fastest interconnect that I have is USB 3.0 between my Talos II (host) and ROCKPro64 (device/otg). I plan to make my own guix channel anyway with personal changes and for software development. For example I plan to add guile scripting to eeschema, after I found out that the python scripts are broken and upgrade to KiCad 8 or any later version. > > > > I think this is worth a bug report, and maybe you're also up to > sending some patches? I think it's slightly more complicated than > just the kicad package, though, since libcxi isn't a direct > dependency: > > $ guix graph --path kicad libcxi > kicad@7.0.11 > libngspice@43 > openmpi@4.1.6 > libfabric@1.22.0 > libcxi@1.0.1-0.5b6f8b5 > > So, I think what needs to happen is that libcxi needs to have POWER9 > removed from its supported-systems field; and libfabric needs to > conditionally include libcxi in its inputs based on architecture. I > think the best way to do that is by checking for the build system in > (package-supported-systems libcxi), which will avoid hardcoding > duplicate arch tests in two packages. > > -- Ian > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II 2024-11-30 20:59 ` Ian Eure 2024-12-01 11:54 ` Tobias Alexandra Platen @ 2024-12-01 13:50 ` Efraim Flashner 2024-12-01 17:51 ` Tobias Alexandra Platen 1 sibling, 1 reply; 5+ messages in thread From: Efraim Flashner @ 2024-12-01 13:50 UTC (permalink / raw) To: Ian Eure; +Cc: guix-devel [-- Attachment #1: Type: text/plain, Size: 3232 bytes --] On Sat, Nov 30, 2024 at 08:59:02PM +0000, Ian Eure wrote: > Hi Tobias, > > On Sat, Nov 30, 2024, at 8:18 PM, Tobias Alexandra Platen wrote: > > When I try to install Kicad, I'll get the following output: > > > > The following derivations will be built: > > /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv > > /gnu/store/x26zsx3fw74vhfc35i79fansmlmhl0cc-libfabric-1.22.0.drv > > /gnu/store/nfj2qvhyxvfc7x5fkdlyg2z1wnpqw9cz-openmpi-4.1.6.drv > > /gnu/store/l1rbmwj9m4kgkm1qada665mm0m6g10w1-libngspice-43.drv > > /gnu/store/y88c48hzcm78ch39wjfa3dpdgw9n6m7r-webkitgtk-with-libsoup2- > > 2.44.1.drv > > /gnu/store/qv0zpz8h2dvhbmxz6smsbmc763rdkdxm-wxwidgets-3.2.5.drv > > /gnu/store/llydl3baxardzgf9xmdbgjikny68vaar-python-wxpython-4.2.0.drv > > /gnu/store/b0s2jgimknw6035kcqvpb6sdxkhakz7b-kicad-7.0.11.drv > > > > After a few minutes the build fails with: > > > > building /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv... > > \ 'build' phasebuilder for > > `/gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv' failed with exit code 1 > > build of /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv failed > > View build log at > > '/var/log/guix/drvs/5r/inv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > 0.5b6f8b5.drv.gz'. > > ........ > > CC utils/read_lat.o > > ........ > > #error "Unsupported CPU architecture" > > > > I also found a blogpost which mentions libcxi, what does libcxi do? > > https://hpc.guix.info/blog/2024/11/targeting-the-crayhpe-slingshot-interconnect/ > > > > The package description provides a pretty good summary: > > Interface to the Cassini/Slingshot high-speed interconnect > > Libcxi provides applications with a low-level interface to the > Cray/HPE Cassini high-speed NIC (network interface controller), also > known as Slingshot. > > > I guess that libcxi is optional for Kicad, so I could hack guix to > > build Kicad without libcxi. > > > > I think this is worth a bug report, and maybe you're also up to sending some patches? I think it's slightly more complicated than just the kicad package, though, since libcxi isn't a direct dependency: > > $ guix graph --path kicad libcxi > kicad@7.0.11 > libngspice@43 > openmpi@4.1.6 > libfabric@1.22.0 > libcxi@1.0.1-0.5b6f8b5 > > So, I think what needs to happen is that libcxi needs to have POWER9 removed from its supported-systems field; and libfabric needs to conditionally include libcxi in its inputs based on architecture. I think the best way to do that is by checking for the build system in (package-supported-systems libcxi), which will avoid hardcoding duplicate arch tests in two packages. I pushed a patch limiting cassini-headers (one of libcxi's dependencies) to the architectures it supports, and then I adjusted libfabric to check the transitive-supported-packages. Kicad should now build again on ppc64le. -- Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351 Confidentiality cannot be guaranteed on emails sent or received unencrypted [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II 2024-12-01 13:50 ` Efraim Flashner @ 2024-12-01 17:51 ` Tobias Alexandra Platen 0 siblings, 0 replies; 5+ messages in thread From: Tobias Alexandra Platen @ 2024-12-01 17:51 UTC (permalink / raw) To: guix-devel Confimed, it is working. On Sun, 2024-12-01 at 15:50 +0200, Efraim Flashner wrote: > On Sat, Nov 30, 2024 at 08:59:02PM +0000, Ian Eure wrote: > > Hi Tobias, > > > > On Sat, Nov 30, 2024, at 8:18 PM, Tobias Alexandra Platen wrote: > > > When I try to install Kicad, I'll get the following output: > > > > > > The following derivations will be built: > > > /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > > 0.5b6f8b5.drv > > > /gnu/store/x26zsx3fw74vhfc35i79fansmlmhl0cc-libfabric- > > > 1.22.0.drv > > > /gnu/store/nfj2qvhyxvfc7x5fkdlyg2z1wnpqw9cz-openmpi-4.1.6.drv > > > /gnu/store/l1rbmwj9m4kgkm1qada665mm0m6g10w1-libngspice-43.drv > > > /gnu/store/y88c48hzcm78ch39wjfa3dpdgw9n6m7r-webkitgtk-with- > > > libsoup2- > > > 2.44.1.drv > > > /gnu/store/qv0zpz8h2dvhbmxz6smsbmc763rdkdxm-wxwidgets-3.2.5.drv > > > /gnu/store/llydl3baxardzgf9xmdbgjikny68vaar-python-wxpython- > > > 4.2.0.drv > > > /gnu/store/b0s2jgimknw6035kcqvpb6sdxkhakz7b-kicad-7.0.11.drv > > > > > > After a few minutes the build fails with: > > > > > > building /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi- > > > 1.0.1- > > > 0.5b6f8b5.drv... > > > \ 'build' phasebuilder for > > > `/gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi-1.0.1- > > > 0.5b6f8b5.drv' failed with exit code 1 > > > build of /gnu/store/5rinv8djwjz0bdami6nr6cm3zj382fsb-libcxi- > > > 1.0.1- > > > 0.5b6f8b5.drv failed > > > View build log at > > > '/var/log/guix/drvs/5r/inv8djwjz0bdami6nr6cm3zj382fsb-libcxi- > > > 1.0.1- > > > 0.5b6f8b5.drv.gz'. > > > ........ > > > CC utils/read_lat.o > > > ........ > > > #error "Unsupported CPU architecture" > > > > > > I also found a blogpost which mentions libcxi, what does libcxi > > > do? > > > https://hpc.guix.info/blog/2024/11/targeting-the-crayhpe-slingshot-interconnect/ > > > > > > > The package description provides a pretty good summary: > > > > Interface to the Cassini/Slingshot high-speed interconnect > > > > Libcxi provides applications with a low-level interface to > > the > > Cray/HPE Cassini high-speed NIC (network interface > > controller), also > > known as Slingshot. > > > > > I guess that libcxi is optional for Kicad, so I could hack guix > > > to > > > build Kicad without libcxi. > > > > > > > I think this is worth a bug report, and maybe you're also up to > > sending some patches? I think it's slightly more complicated than > > just the kicad package, though, since libcxi isn't a direct > > dependency: > > > > $ guix graph --path kicad libcxi > > kicad@7.0.11 > > libngspice@43 > > openmpi@4.1.6 > > libfabric@1.22.0 > > libcxi@1.0.1-0.5b6f8b5 > > > > So, I think what needs to happen is that libcxi needs to have > > POWER9 removed from its supported-systems field; and libfabric > > needs to conditionally include libcxi in its inputs based on > > architecture. I think the best way to do that is by checking for > > the build system in (package-supported-systems libcxi), which will > > avoid hardcoding duplicate arch tests in two packages. > > I pushed a patch limiting cassini-headers (one of libcxi's > dependencies) > to the architectures it supports, and then I adjusted libfabric to > check > the transitive-supported-packages. Kicad should now build again on > ppc64le. > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-12-01 17:51 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-11-30 20:18 guix package -i kicad will fait with #error "Unsupported CPU architecture" on my Talos II Tobias Alexandra Platen 2024-11-30 20:59 ` Ian Eure 2024-12-01 11:54 ` Tobias Alexandra Platen 2024-12-01 13:50 ` Efraim Flashner 2024-12-01 17:51 ` Tobias Alexandra Platen
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/guix.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).