From: "pelzflorian (Florian Pelz)" <pelzflorian@pelzflorian.de>
To: Marius Bakke <marius@gnu.org>
Cc: guix-devel@gnu.org
Subject: Re: GNU Guix 1.2.0rc1 available for testing!
Date: Mon, 16 Nov 2020 00:16:43 +0100 [thread overview]
Message-ID: <20201115231643.7mslq2sjzliv4nfd@pelzflorian.localdomain> (raw)
In-Reply-To: <874klqb82u.fsf@gnu.org>
On Sun, Nov 15, 2020 at 10:53:29PM +0100, Marius Bakke wrote:
> I have just installed a system using manual partitioning through the
> installer, with encryption. Everything worked like a charm.
>
> Can you provide more details about the steps you did to arrive at the
> error? And information about the (new and old) partition layout?
Thank you for trying. Hmm strange. I tried once again (I think I did
the same steps as before) and it worked. Maybe I forgot something?
Maybe it depends on how fast the machine completes a formatting task?
So I tried again two more times and it failed again, I got the error
again both times during partition formatting.
So all the partitioning is already done except for the encryption.
/dev/sdc is the install USB drive. /dev/sda is the hard disk.
/dev/sda1 is the EFI system partition; I do not format it. /dev/sda5
is the partition I try to put the encrypted root fs on. I check
encryption and set its mount point to “/”.
/var/log/messages has the following log for the installer:
Nov 15 23:49:30 localhost installer[259]: Display is 128x42.
Nov 15 23:49:30 localhost installer[259]: running step 'locale'
Nov 15 23:49:30 localhost installer[259]: running step 'language'
Nov 15 23:49:31 localhost installer[259]: running form #<newt-form 771a60> ("Locale language") with 0 clients
Nov 15 23:49:40 localhost vmunix: [ 56.102132] tg3 0000:03:00.0 enp3s0: Link is down
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {RX} 24 packets 3438 bytes
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {TX} 31 packets 3795 bytes
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {update} flags 36867 <UP>
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {newlink} index 2 address 10:9A:DD:46:4F:9F mtu 1500
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {newlink} index 2 operstate 2 <DOWN>
Nov 15 23:49:40 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:49:40 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {del} address 192.168.178.74/24 label enp3s0
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {del} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {del} route fd00:: gw :: scope 0 <UNIVERSE>
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
Nov 15 23:49:40 localhost connmand[210]: enp3s0 {del} address fd00::129a:ddff:fe46:4f9f/64 label (null)
Nov 15 23:50:23 localhost installer[259]: running step 'territory'
Nov 15 23:50:23 localhost installer[259]: running form #<newt-form 771ab0> ("Locale location") with 0 clients
Nov 15 23:50:26 localhost installer[259]: running step 'codeset'
Nov 15 23:50:26 localhost installer[259]: running step 'modifier'
Nov 15 23:50:26 localhost shepherd[1]: Service console-font-tty2 has been stopped.
Nov 15 23:50:26 localhost shepherd[1]: Service term-tty2 has been stopped.
Nov 15 23:50:26 localhost shepherd[1]: Service host-name has been started.
Nov 15 23:50:26 localhost shepherd[1]: Service term-tty2 has been started.
Nov 15 23:50:26 localhost installer[259]: running step 'welcome'
Nov 15 23:50:26 localhost installer[259]: running form #<newt-form 788ea0> ("GNU Guix install") with 0 clients
Nov 15 23:50:27 localhost installer[259]: running step 'timezone'
Nov 15 23:50:27 localhost installer[259]: running form #<newt-form 789640> ("Timezone") with 0 clients
Nov 15 23:50:32 localhost installer[259]: running form #<newt-form 7859b0> ("Timezone") with 0 clients
Nov 15 23:50:34 localhost installer[259]: running step 'keymap'
Nov 15 23:50:34 localhost installer[259]: running step 'layout'
Nov 15 23:50:34 localhost installer[259]: running form #<newt-form 783e40> ("Layout") with 0 clients
Nov 15 23:50:36 localhost installer[259]: running step 'variant'
Nov 15 23:50:36 localhost installer[259]: running form #<newt-form 7842a0> ("Variant") with 0 clients
Nov 15 23:50:41 localhost installer[259]: running step 'hostname'
Nov 15 23:50:41 localhost installer[259]: running form #<newt-form 785dd0> ("Hostname") with 0 clients
Nov 15 23:50:53 localhost installer[259]: running step 'network'
Nov 15 23:50:53 localhost installer[259]: running step 'select-technology'
Nov 15 23:50:53 localhost installer[259]: running step 'power-technology'
Nov 15 23:50:54 localhost installer[259]: running step 'connect-service'
Nov 15 23:50:54 localhost installer[259]: running form #<newt-form 7e5590> ("No service") with 0 clients
Nov 15 23:51:00 localhost vmunix: [ 135.760473] tg3 0000:03:00.0 enp3s0: Link is up at 100 Mbps, full duplex
Nov 15 23:51:00 localhost vmunix: [ 135.760478] tg3 0000:03:00.0 enp3s0: Flow control is on for TX and on for RX
Nov 15 23:51:00 localhost vmunix: [ 135.760598] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {RX} 24 packets 3438 bytes
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {TX} 31 packets 3795 bytes
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {newlink} index 2 address 10:9A:DD:46:4F:9F mtu 1500
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {newlink} index 2 operstate 6 <UP>
Nov 15 23:51:00 localhost connmand[210]: Setting domainname to fritz.box
Nov 15 23:51:00 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} address 192.168.178.74/24 label enp3s0 family 2
Nov 15 23:51:00 localhost connmand[210]: ntp: adjust (slew): +0.137667 sec
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK>
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK>
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE>
Nov 15 23:51:00 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:51:00 localhost last message repeated 5 times
Nov 15 23:51:00 localhost connmand[210]: enp3s0 {add} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE>
Nov 15 23:51:01 localhost connmand[210]: enp3s0 {del} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE>
Nov 15 23:51:01 localhost installer[259]: running step 'select-technology'
Nov 15 23:51:01 localhost installer[259]: running step 'power-technology'
Nov 15 23:51:02 localhost connmand[210]: enp3s0 {add} route fd00:: gw :: scope 0 <UNIVERSE>
Nov 15 23:51:02 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:51:02 localhost installer[259]: running step 'connect-service'
Nov 15 23:51:03 localhost installer[259]: running step 'wait-online'
Nov 15 23:51:04 localhost installer[259]: running step 'user'
Nov 15 23:51:04 localhost installer[259]: running form #<newt-form 857f70> ("System administrator password") with 0 clients
Nov 15 23:51:04 localhost connmand[210]: enp3s0 {add} address fd00::129a:ddff:fe46:4f9f/64 label (null) family 10
Nov 15 23:51:04 localhost nscd: 211 monitored file `/etc/resolv.conf` was written to
Nov 15 23:51:04 localhost last message repeated 5 times
Nov 15 23:51:15 localhost installer[259]: running form #<newt-form 85c870> ("Password confirmation required") with 0 clients
Nov 15 23:51:23 localhost installer[259]: running form #<newt-form 85c820> (add-users) with 0 clients
Nov 15 23:51:45 localhost installer[259]: running form #<newt-form 859770> ("Password confirmation required") with 0 clients
Nov 15 23:51:54 localhost installer[259]: running form #<newt-form 858770> (add-users) with 0 clients
Nov 15 23:51:55 localhost installer[259]: running step 'services'
Nov 15 23:51:55 localhost installer[259]: running form #<newt-form 859480> ("Desktop environment") with 0 clients
Nov 15 23:52:01 localhost installer[259]: running form #<newt-form 8594d0> ("Network service") with 0 clients
Nov 15 23:52:02 localhost installer[259]: running step 'partition'
Nov 15 23:52:04 localhost vmunix: [ 199.938163] sda: sda1 sda2 sda3 sda4 sda5 sda7
Nov 15 23:52:04 localhost vmunix: [ 200.195324] sdc: sdc2
Nov 15 23:52:04 localhost installer[259]: running form #<newt-form 8592a0> ("Partitioning method") with 0 clients
Nov 15 23:52:08 localhost installer[259]: running form #<newt-form 8594d0> ("Manual partitioning") with 0 clients
Nov 15 23:52:08 localhost vmunix: [ 203.706965] sda: sda1 sda2 sda3 sda4 sda5 sda7
Nov 15 23:52:08 localhost vmunix: [ 203.715838] sdc: sdc2
Nov 15 23:52:12 localhost installer[259]: running form #<newt-form 859910> ("Partition edit") with 0 clients
Nov 15 23:52:15 localhost installer[259]: running form #<newt-form 86f5f0> ("Encryption label") with 0 clients
Nov 15 23:52:24 localhost installer[259]: running form #<newt-form 86ee10> ("Partition edit") with 0 clients
Nov 15 23:52:26 localhost installer[259]: running form #<newt-form 864610> ("Mounting point") with 0 clients
Nov 15 23:52:28 localhost installer[259]: running form #<newt-form 8643a0> ("Partition edit") with 0 clients
Nov 15 23:52:30 localhost installer[259]: running form #<newt-form 864450> ("Manual partitioning") with 0 clients
Nov 15 23:52:33 localhost installer[259]: running form #<newt-form 86f730> ("Password required") with 0 clients
Nov 15 23:52:45 localhost installer[259]: running form #<newt-form 870810> ("Password confirmation required") with 0 clients
Nov 15 23:52:55 localhost installer[259]: running form #<newt-form 8643a0> ("Format disk?") with 0 clients
Nov 15 23:53:01 localhost vmunix: [ 257.244569] sdc: sdc2
Nov 15 23:53:03 localhost installer[259]: crashing due to uncaught exception: misc-error (#f "~A" ("Device /dev/sda is still in use.") #f)
Nov 15 23:53:03 localhost installer[259]: running form #<newt-form 865370> ("Unexpected problem") with 0 clients
I assume some formatting step had not completed in time.
Regards,
Florian
next prev parent reply other threads:[~2020-11-15 23:17 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-13 17:07 GNU Guix 1.2.0rc1 available for testing! Ludovic Courtès
2020-11-15 16:19 ` zimoun
2020-11-15 19:16 ` pelzflorian (Florian Pelz)
2020-11-15 21:53 ` Marius Bakke
2020-11-15 23:16 ` pelzflorian (Florian Pelz) [this message]
2020-11-16 9:12 ` Mathieu Othacehe
2020-11-16 11:47 ` pelzflorian (Florian Pelz)
2020-11-17 9:02 ` Mathieu Othacehe
2020-11-17 12:13 ` pelzflorian (Florian Pelz)
2020-11-16 15:49 ` Miguel Ángel Arruga Vivas
2020-11-17 9:06 ` Mathieu Othacehe
2020-11-17 9:30 ` Ludovic Courtès
2020-11-17 9:38 ` Mathieu Othacehe
2020-11-17 14:41 ` Ludovic Courtès
2020-11-17 15:26 ` zimoun
2020-11-17 21:19 ` Ludovic Courtès
2020-11-17 15:41 ` pelzflorian (Florian Pelz)
2020-11-17 18:13 ` Mathieu Othacehe
2020-11-25 18:26 ` Tobias Platen
2020-11-27 10:10 ` Ludovic Courtès
2020-11-27 11:09 ` Ricardo Wurmus
2020-11-17 23:12 ` Mark H Weaver
2020-11-16 15:39 ` Miguel Ángel Arruga Vivas
2020-11-16 0:10 ` Oleg Pykhalov
2020-11-16 9:06 ` Ludovic Courtès
2020-11-16 16:24 ` John Soo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://guix.gnu.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201115231643.7mslq2sjzliv4nfd@pelzflorian.localdomain \
--to=pelzflorian@pelzflorian.de \
--cc=guix-devel@gnu.org \
--cc=marius@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).