* [PATCH] Add Bluetooth support to Pulseaudio. @ 2016-05-14 9:43 Ricardo Wurmus 2016-05-14 9:43 ` [PATCH] gnu: pulseaudio: Enable support for Bluetooth Ricardo Wurmus 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost 0 siblings, 2 replies; 10+ messages in thread From: Ricardo Wurmus @ 2016-05-14 9:43 UTC (permalink / raw) To: guix-devel Hello Guix, this patch adds Bluetooth support to pulseaudio. (Since bluez5 there is no native support for the ALSA backend any more.) This adds very little to the pulseaudio closure as you can see below. Note that this depends on the previous patch adding SBC. More than 100 packages would need to be rebuilt. Among those are big packages like GNOME, Blender, and conkeror. Should I push this to core-updates then? Without Bluetooth support: store item total self /gnu/store/0r8ppfz6nlgfllnqkdllc7a7p9dkw8ql-pulseaudio-8.0 153.8 7.7 5.0% /gnu/store/ls0g4gd1mrky3zgf6nw2khxkvjpqsvh7-avahi-0.6.31 113.0 2.4 1.5% /gnu/store/m5hvapdxh6l8sr4b7mp23hb96csqmp4y-eudev-3.1.5 96.9 7.0 4.5% /gnu/store/66nq87yz0syphfzay4x5w810jpf5dl5n-util-linux-2.27 88.5 10.2 6.6% /gnu/store/lbkdykh3aa1469li01rwyya02q50r3b9-glib-2.46.1 86.0 13.2 8.6% /gnu/store/vhl6a5harxz1pxjnkvqrm3f5fhygcx6k-fftwf-3.3.4 75.9 3.6 2.3% /gnu/store/ndf679ac3g9kjfqika5fr73wg6zrdrnr-kmod-17 74.1 0.3 0.2% /gnu/store/z8vgpay1q450ndgil902xxxz5mq0b1qr-xz-5.2.2 73.4 1.1 0.7% /gnu/store/dafbdv4drmyc40gia6hhin9n1s4aj0m6-dbus-1.10.0 73.2 1.7 1.1% /gnu/store/7cdd8s466qyjh64m0byq0rz9gk1jid40-bash-4.3.42 72.3 4.7 3.1% /gnu/store/xqzmjw2b2j5i9pmkjmnjp3dm7hdiqln0-libx11-1.6.3 70.9 4.9 3.2% /gnu/store/jvxkis7gibms9x5irnvwha0a7x0zrsbi-libsndfile-1.0.26 68.0 1.8 1.2% /gnu/store/p7kjmkfsax6qgz2ihh2wiicxmd0mydhz-readline-6.3 67.6 1.2 0.8% /gnu/store/xadbq6k36aphlx0haxxzym3xmd5r1rp8-ncurses-6.0 66.4 5.7 3.7% /gnu/store/jsy847sch7lnxjppkn1s1as22dbx74fx-libxcb-1.11 65.9 5.0 3.3% /gnu/store/xr9p87kwcdgcxb0la74d7ichrshykz14-libvorbis-1.3.5 64.0 2.8 1.8% /gnu/store/ryy53w510l3ppw3a0lspzqxbdkyg2li2-flac-1.3.1 63.4 2.2 1.5% /gnu/store/pv2xg14lgghxfpl7jhirc7dp0m3172js-alsa-lib-1.0.27.1 62.7 2.0 1.3% /gnu/store/sn3rchx4zcf55jc1388rq96z731ivk9w-speex-1.2rc1 62.2 1.0 0.7% /gnu/store/w7vb2skc8q5wjcfbya0qba7nj83pl6z4-expat-2.1.0 61.3 0.6 0.4% /gnu/store/84d0xnz6jjwl0bj7hlywpc7vckjg66kr-gdbm-1.11 61.2 0.5 0.3% /gnu/store/8a2fncbkp9m8yq1xd1995i31c6b063f0-libogg-1.3.2 61.2 0.5 0.3% /gnu/store/zvm9rk007dd6r7rzy0ykjggpi5rjrr56-libcap-2.24 61.1 0.1 0.1% /gnu/store/hsxhfmjgh8m4c0pavq3gd3gcrn8zrgxj-zlib-1.2.8 61.1 0.4 0.2% /gnu/store/rpwnky5cppw0j9qbapajin7k7n3fn1jj-attr-2.4.47 61.0 0.2 0.2% /gnu/store/j45119cdl7r92z41bfkfnlv91waidf8k-json-c-0.12 60.9 0.2 0.1% /gnu/store/zhrhrs1myalxjppwjyn2971l6gld22rp-libxdmcp-1.1.2 60.9 0.2 0.1% /gnu/store/557i3227wv6h8rj2zrc5vr4rmh0zgi6i-libffi-3.2.1 60.8 0.1 0.1% /gnu/store/rs3cww7dqv9x5zhbs87f0nvkzx8h3dn3-libltdl-2.4.6 60.8 0.1 0.1% /gnu/store/g9jbnfywqq0v0mkkb3313r0z9p0kar4b-libdaemon-0.14 60.8 0.1 0.1% /gnu/store/c56bqxg9clybrmsgj0nk1z5n425cgfas-libxau-1.0.8 60.8 0.0 0.0% /gnu/store/v39bh3ln3ncnzhyw0kd12d46kww9747v-gcc-4.9.3-lib 60.7 22.9 14.9% /gnu/store/b1yqjimbdh5bf9jnizd4h7yf110744j2-bash-4.3.42 49.5 4.7 3.1% /gnu/store/0wy21msm26sdgg1jdnvinbz7hgpz7cjm-readline-6.3 44.8 1.2 0.8% /gnu/store/aj3jaf7jln8yfzy9k96mn01fnmjnyx0g-ncurses-6.0 43.6 5.7 3.7% /gnu/store/8m00x5x8ykmar27s9248cmhnkdb2n54a-glibc-2.22 37.9 36.5 23.7% /gnu/store/5y72ql4zbnbd50lf88k91k0y766kq75x-bash-static-4.3.42 1.4 1.4 0.9% With Bluetooth support: store item total self /gnu/store/qzrc629zic2l99qlxpbq15icxzwxwvp6-pulseaudio-8.0 154.5 8.0 5.2% /gnu/store/ls0g4gd1mrky3zgf6nw2khxkvjpqsvh7-avahi-0.6.31 113.0 2.4 1.5% /gnu/store/m5hvapdxh6l8sr4b7mp23hb96csqmp4y-eudev-3.1.5 96.9 7.0 4.5% /gnu/store/66nq87yz0syphfzay4x5w810jpf5dl5n-util-linux-2.27 88.5 10.2 6.6% /gnu/store/lbkdykh3aa1469li01rwyya02q50r3b9-glib-2.46.1 86.0 13.2 8.5% /gnu/store/vhl6a5harxz1pxjnkvqrm3f5fhygcx6k-fftwf-3.3.4 75.9 3.6 2.3% /gnu/store/ndf679ac3g9kjfqika5fr73wg6zrdrnr-kmod-17 74.1 0.3 0.2% /gnu/store/z8vgpay1q450ndgil902xxxz5mq0b1qr-xz-5.2.2 73.4 1.1 0.7% /gnu/store/dafbdv4drmyc40gia6hhin9n1s4aj0m6-dbus-1.10.0 73.2 1.7 1.1% /gnu/store/7cdd8s466qyjh64m0byq0rz9gk1jid40-bash-4.3.42 72.3 4.7 3.0% /gnu/store/xqzmjw2b2j5i9pmkjmnjp3dm7hdiqln0-libx11-1.6.3 70.9 4.9 3.2% /gnu/store/jvxkis7gibms9x5irnvwha0a7x0zrsbi-libsndfile-1.0.26 68.0 1.8 1.1% /gnu/store/p7kjmkfsax6qgz2ihh2wiicxmd0mydhz-readline-6.3 67.6 1.2 0.8% /gnu/store/xadbq6k36aphlx0haxxzym3xmd5r1rp8-ncurses-6.0 66.4 5.7 3.7% /gnu/store/jsy847sch7lnxjppkn1s1as22dbx74fx-libxcb-1.11 65.9 5.0 3.2% /gnu/store/xr9p87kwcdgcxb0la74d7ichrshykz14-libvorbis-1.3.5 64.0 2.8 1.8% /gnu/store/ryy53w510l3ppw3a0lspzqxbdkyg2li2-flac-1.3.1 63.4 2.2 1.5% /gnu/store/pv2xg14lgghxfpl7jhirc7dp0m3172js-alsa-lib-1.0.27.1 62.7 2.0 1.3% /gnu/store/sn3rchx4zcf55jc1388rq96z731ivk9w-speex-1.2rc1 62.2 1.0 0.7% /gnu/store/w7vb2skc8q5wjcfbya0qba7nj83pl6z4-expat-2.1.0 61.3 0.6 0.4% /gnu/store/84d0xnz6jjwl0bj7hlywpc7vckjg66kr-gdbm-1.11 61.2 0.5 0.3% /gnu/store/8a2fncbkp9m8yq1xd1995i31c6b063f0-libogg-1.3.2 61.2 0.5 0.3% /gnu/store/zvm9rk007dd6r7rzy0ykjggpi5rjrr56-libcap-2.24 61.1 0.1 0.1% /gnu/store/hsxhfmjgh8m4c0pavq3gd3gcrn8zrgxj-zlib-1.2.8 61.1 0.4 0.2% /gnu/store/9ff190v55r04p84vh6yjqqg403dagir0-sbc-1.3 61.0 0.3 0.2% /gnu/store/rpwnky5cppw0j9qbapajin7k7n3fn1jj-attr-2.4.47 61.0 0.2 0.2% /gnu/store/j45119cdl7r92z41bfkfnlv91waidf8k-json-c-0.12 60.9 0.2 0.1% /gnu/store/zhrhrs1myalxjppwjyn2971l6gld22rp-libxdmcp-1.1.2 60.9 0.2 0.1% /gnu/store/557i3227wv6h8rj2zrc5vr4rmh0zgi6i-libffi-3.2.1 60.8 0.1 0.1% /gnu/store/rs3cww7dqv9x5zhbs87f0nvkzx8h3dn3-libltdl-2.4.6 60.8 0.1 0.1% /gnu/store/g9jbnfywqq0v0mkkb3313r0z9p0kar4b-libdaemon-0.14 60.8 0.1 0.1% /gnu/store/c56bqxg9clybrmsgj0nk1z5n425cgfas-libxau-1.0.8 60.8 0.0 0.0% /gnu/store/v39bh3ln3ncnzhyw0kd12d46kww9747v-gcc-4.9.3-lib 60.7 22.9 14.8% /gnu/store/b1yqjimbdh5bf9jnizd4h7yf110744j2-bash-4.3.42 49.5 4.7 3.0% /gnu/store/0wy21msm26sdgg1jdnvinbz7hgpz7cjm-readline-6.3 44.8 1.2 0.8% /gnu/store/aj3jaf7jln8yfzy9k96mn01fnmjnyx0g-ncurses-6.0 43.6 5.7 3.7% /gnu/store/8m00x5x8ykmar27s9248cmhnkdb2n54a-glibc-2.22 37.9 36.5 23.6% /gnu/store/5y72ql4zbnbd50lf88k91k0y766kq75x-bash-static-4.3.42 1.4 1.4 0.9% ~~ Ricardo Ricardo Wurmus (1): gnu: pulseaudio: Enable support for Bluetooth. gnu/packages/pulseaudio.scm | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) -- 2.7.3 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH] gnu: pulseaudio: Enable support for Bluetooth. 2016-05-14 9:43 [PATCH] Add Bluetooth support to Pulseaudio Ricardo Wurmus @ 2016-05-14 9:43 ` Ricardo Wurmus 2016-05-16 21:01 ` Ludovic Courtès 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost 1 sibling, 1 reply; 10+ messages in thread From: Ricardo Wurmus @ 2016-05-14 9:43 UTC (permalink / raw) To: guix-devel * gnu/packages/pulseaudio.scm (pulseaudio)[arguments]: Add "--enable-bluez5" to configure flags. [inputs]: Add "bluez" and "sbc". --- gnu/packages/pulseaudio.scm | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/gnu/packages/pulseaudio.scm b/gnu/packages/pulseaudio.scm index b2b0508..2d97539 100644 --- a/gnu/packages/pulseaudio.scm +++ b/gnu/packages/pulseaudio.scm @@ -2,6 +2,7 @@ ;;; Copyright © 2013, 2014, 2015 Ludovic Courtès <ludo@gnu.org> ;;; Copyright © 2014, 2015, 2016 Mark H Weaver <mhw@netris.org> ;;; Copyright © 2016 Efraim Flashner <efraim@flashner.co.il> +;;; Copyright © 2016 Ricardo Wurmus <rekado@elephly.net> ;;; ;;; This file is part of GNU Guix. ;;; @@ -138,6 +139,7 @@ rates.") (arguments `(#:configure-flags (list "--localstatedir=/var" ;"--sysconfdir=/etc" "--disable-oss-output" + "--enable-bluez5" (string-append "--with-udev-rules-dir=" (assoc-ref %outputs "out") "/lib/udev/rules.d")) @@ -153,8 +155,9 @@ rates.") %standard-phases))) (inputs ;; TODO: Add optional inputs (GTK+?). - `(;; ("sbc" ,sbc) - ("alsa-lib" ,alsa-lib) + `(("alsa-lib" ,alsa-lib) + ("bluez" ,bluez) + ("sbc" ,sbc) ("json-c" ,json-c) ("speex" ,speex) ("libsndfile" ,libsndfile) -- 2.7.3 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] gnu: pulseaudio: Enable support for Bluetooth. 2016-05-14 9:43 ` [PATCH] gnu: pulseaudio: Enable support for Bluetooth Ricardo Wurmus @ 2016-05-16 21:01 ` Ludovic Courtès 2016-06-28 6:36 ` Ricardo Wurmus 0 siblings, 1 reply; 10+ messages in thread From: Ludovic Courtès @ 2016-05-16 21:01 UTC (permalink / raw) To: Ricardo Wurmus; +Cc: guix-devel Ricardo Wurmus <rekado@elephly.net> skribis: > * gnu/packages/pulseaudio.scm (pulseaudio)[arguments]: Add > "--enable-bluez5" to configure flags. > [inputs]: Add "bluez" and "sbc". I think it’s a reasonable change. Ideally a ‘pulseaudio-updates’ branch would be the right thing. However, if it builds and works as expected on master (at least make sure ‘guix gc --references’ shows bluez and SBC), then it’s OK to commit to ‘core-updates’ since it looks like a non-disruptive change. Thanks! Ludo’. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] gnu: pulseaudio: Enable support for Bluetooth. 2016-05-16 21:01 ` Ludovic Courtès @ 2016-06-28 6:36 ` Ricardo Wurmus 0 siblings, 0 replies; 10+ messages in thread From: Ricardo Wurmus @ 2016-06-28 6:36 UTC (permalink / raw) To: Ludovic Courtès; +Cc: guix-devel Ludovic Courtès <ludo@gnu.org> writes: > Ricardo Wurmus <rekado@elephly.net> skribis: > >> * gnu/packages/pulseaudio.scm (pulseaudio)[arguments]: Add >> "--enable-bluez5" to configure flags. >> [inputs]: Add "bluez" and "sbc". > > I think it’s a reasonable change. > > Ideally a ‘pulseaudio-updates’ branch would be the right thing. > However, if it builds and works as expected on master (at least make > sure ‘guix gc --references’ shows bluez and SBC), then it’s OK to commit > to ‘core-updates’ since it looks like a non-disruptive change. I’ve just pushed it to core-updates. Thanks! ~~ Ricardo ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-14 9:43 [PATCH] Add Bluetooth support to Pulseaudio Ricardo Wurmus 2016-05-14 9:43 ` [PATCH] gnu: pulseaudio: Enable support for Bluetooth Ricardo Wurmus @ 2016-05-14 16:54 ` Alex Kost 2016-05-14 17:14 ` Danny Milosavljevic ` (2 more replies) 1 sibling, 3 replies; 10+ messages in thread From: Alex Kost @ 2016-05-14 16:54 UTC (permalink / raw) To: Ricardo Wurmus; +Cc: guix-devel Ricardo Wurmus (2016-05-14 12:43 +0300) wrote: > Hello Guix, > > this patch adds Bluetooth support to pulseaudio. (Since bluez5 there > is no native support for the ALSA backend any more.) This adds very > little to the pulseaudio closure as you can see below. > > Note that this depends on the previous patch adding SBC. > > More than 100 packages would need to be rebuilt. Among those are big > packages like GNOME, Blender, and conkeror. Should I push this to > core-updates then? Conkeror is not the big one; it's a rather small wrapper around icecat (in our case). I don't know why "guix refresh -l pulseaudio" shows conkeror and not icecat, but icecat is a really big and important one, so I think it's better to commit this to core-updates, indeed. Although ISTR Ludovic told that core-updates is only for the real core packages (that rebuild the whole world). BTW do you still have problems with using guix repo through ssh? I do, I mean I can't push or fetch. And as I see that other people commit to the guix repo, I begin to think that it's only me who have this problem. -- Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost @ 2016-05-14 17:14 ` Danny Milosavljevic 2016-05-14 19:59 ` Efraim Flashner 2016-05-15 12:42 ` Ricardo Wurmus 2 siblings, 0 replies; 10+ messages in thread From: Danny Milosavljevic @ 2016-05-14 17:14 UTC (permalink / raw) To: guix-devel > BTW do you still have problems with using guix repo through ssh? I do, > I mean I can't push or fetch. And as I see that other people commit to > the guix repo, I begin to think that it's only me who have this problem. > FWIW, I can't pull either, not even for url = git://git.sv.gnu.org/guix.git $ git pull fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost 2016-05-14 17:14 ` Danny Milosavljevic @ 2016-05-14 19:59 ` Efraim Flashner 2016-05-15 8:27 ` Alex Kost 2016-05-15 12:42 ` Ricardo Wurmus 2 siblings, 1 reply; 10+ messages in thread From: Efraim Flashner @ 2016-05-14 19:59 UTC (permalink / raw) To: Alex Kost; +Cc: guix-devel [-- Attachment #1: Type: text/plain, Size: 1683 bytes --] On Sat, May 14, 2016 at 07:54:57PM +0300, Alex Kost wrote: > Ricardo Wurmus (2016-05-14 12:43 +0300) wrote: > > > Hello Guix, > > > > this patch adds Bluetooth support to pulseaudio. (Since bluez5 there > > is no native support for the ALSA backend any more.) This adds very > > little to the pulseaudio closure as you can see below. > > > > Note that this depends on the previous patch adding SBC. > > > > More than 100 packages would need to be rebuilt. Among those are big > > packages like GNOME, Blender, and conkeror. Should I push this to > > core-updates then? > > Conkeror is not the big one; it's a rather small wrapper around icecat > (in our case). I don't know why "guix refresh -l pulseaudio" shows > conkeror and not icecat, but icecat is a really big and important one, > so I think it's better to commit this to core-updates, indeed. Although > ISTR Ludovic told that core-updates is only for the real core packages > (that rebuild the whole world). conkeror depends on iceweasel, `guix refresh -l foo' only shows the leafs that need to be rebuilt. > > BTW do you still have problems with using guix repo through ssh? I do, > I mean I can't push or fetch. And as I see that other people commit to > the guix repo, I begin to think that it's only me who have this problem. if you change your url in .git/config to: url = http://git.savannah.gnu.org/r/guix.git you should be able to fetch/pull as before -- Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351 Confidentiality cannot be guaranteed on emails sent or received unencrypted [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-14 19:59 ` Efraim Flashner @ 2016-05-15 8:27 ` Alex Kost 2016-05-15 8:36 ` Efraim Flashner 0 siblings, 1 reply; 10+ messages in thread From: Alex Kost @ 2016-05-15 8:27 UTC (permalink / raw) To: Efraim Flashner; +Cc: guix-devel Efraim Flashner (2016-05-14 22:59 +0300) wrote: > On Sat, May 14, 2016 at 07:54:57PM +0300, Alex Kost wrote: >> Ricardo Wurmus (2016-05-14 12:43 +0300) wrote: >> >> > Hello Guix, >> > >> > this patch adds Bluetooth support to pulseaudio. (Since bluez5 there >> > is no native support for the ALSA backend any more.) This adds very >> > little to the pulseaudio closure as you can see below. >> > >> > Note that this depends on the previous patch adding SBC. >> > >> > More than 100 packages would need to be rebuilt. Among those are big >> > packages like GNOME, Blender, and conkeror. Should I push this to >> > core-updates then? >> >> Conkeror is not the big one; it's a rather small wrapper around icecat >> (in our case). I don't know why "guix refresh -l pulseaudio" shows >> conkeror and not icecat, but icecat is a really big and important one, >> so I think it's better to commit this to core-updates, indeed. Although >> ISTR Ludovic told that core-updates is only for the real core packages >> (that rebuild the whole world). > > conkeror depends on iceweasel, `guix refresh -l foo' only shows the > leafs that need to be rebuilt. Iceweasel? I see that conkeror depends only on icecat. Anyway I don't understand: icecat depends on pulseaudio so it should probably be displayed after "guix refresh -l pulseaudio", or did I miss your point? >> BTW do you still have problems with using guix repo through ssh? I do, >> I mean I can't push or fetch. And as I see that other people commit to >> the guix repo, I begin to think that it's only me who have this problem. > > if you change your url in .git/config to: > > url = http://git.savannah.gnu.org/r/guix.git > > you should be able to fetch/pull as before Thanks, I know that http works, but I need ssh to be able to push :-) Apparently admins know about this problem: http://savannah.gnu.org/forum/forum.php?forum_id=8542 BTW, I didn't change .git/config manually; I just added another (http) remote using magit (by pressing "M a" in the magit status). -- Alex ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-15 8:27 ` Alex Kost @ 2016-05-15 8:36 ` Efraim Flashner 0 siblings, 0 replies; 10+ messages in thread From: Efraim Flashner @ 2016-05-15 8:36 UTC (permalink / raw) To: Alex Kost; +Cc: guix-devel [-- Attachment #1: Type: text/plain, Size: 2632 bytes --] On Sun, May 15, 2016 at 11:27:39AM +0300, Alex Kost wrote: > Efraim Flashner (2016-05-14 22:59 +0300) wrote: > > > On Sat, May 14, 2016 at 07:54:57PM +0300, Alex Kost wrote: > >> Ricardo Wurmus (2016-05-14 12:43 +0300) wrote: > >> > >> > Hello Guix, > >> > > >> > this patch adds Bluetooth support to pulseaudio. (Since bluez5 there > >> > is no native support for the ALSA backend any more.) This adds very > >> > little to the pulseaudio closure as you can see below. > >> > > >> > Note that this depends on the previous patch adding SBC. > >> > > >> > More than 100 packages would need to be rebuilt. Among those are big > >> > packages like GNOME, Blender, and conkeror. Should I push this to > >> > core-updates then? > >> > >> Conkeror is not the big one; it's a rather small wrapper around icecat > >> (in our case). I don't know why "guix refresh -l pulseaudio" shows > >> conkeror and not icecat, but icecat is a really big and important one, > >> so I think it's better to commit this to core-updates, indeed. Although > >> ISTR Ludovic told that core-updates is only for the real core packages > >> (that rebuild the whole world). > > > > conkeror depends on iceweasel, `guix refresh -l foo' only shows the > > leafs that need to be rebuilt. > > Iceweasel? I see that conkeror depends only on icecat. Anyway I don't > understand: icecat depends on pulseaudio so it should probably be > displayed after "guix refresh -l pulseaudio", or did I miss your point? > Ah I meant icecat. 5+ years of Debian, I see ice and think iceweasel. Pulseaudio -> Icecat -> Conkeror, Icecat is the "unimportant" dependancy of Conkeror here. > >> BTW do you still have problems with using guix repo through ssh? I do, > >> I mean I can't push or fetch. And as I see that other people commit to > >> the guix repo, I begin to think that it's only me who have this problem. > > > > if you change your url in .git/config to: > > > > url = http://git.savannah.gnu.org/r/guix.git > > > > you should be able to fetch/pull as before > > Thanks, I know that http works, but I need ssh to be able to push :-) > Apparently admins know about this problem: > http://savannah.gnu.org/forum/forum.php?forum_id=8542 > > BTW, I didn't change .git/config manually; I just added another (http) > remote using magit (by pressing "M a" in the magit status). > > -- > Alex -- Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351 Confidentiality cannot be guaranteed on emails sent or received unencrypted [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] Add Bluetooth support to Pulseaudio. 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost 2016-05-14 17:14 ` Danny Milosavljevic 2016-05-14 19:59 ` Efraim Flashner @ 2016-05-15 12:42 ` Ricardo Wurmus 2 siblings, 0 replies; 10+ messages in thread From: Ricardo Wurmus @ 2016-05-15 12:42 UTC (permalink / raw) To: Alex Kost; +Cc: guix-devel Alex Kost <alezost@gmail.com> writes: > Ricardo Wurmus (2016-05-14 12:43 +0300) wrote: > >> Hello Guix, >> >> this patch adds Bluetooth support to pulseaudio. (Since bluez5 there >> is no native support for the ALSA backend any more.) This adds very >> little to the pulseaudio closure as you can see below. >> >> Note that this depends on the previous patch adding SBC. >> >> More than 100 packages would need to be rebuilt. Among those are big >> packages like GNOME, Blender, and conkeror. Should I push this to >> core-updates then? > > Conkeror is not the big one; it's a rather small wrapper around icecat > (in our case). I don't know why "guix refresh -l pulseaudio" shows > conkeror and not icecat, but icecat is a really big and important one, > so I think it's better to commit this to core-updates, indeed. Although > ISTR Ludovic told that core-updates is only for the real core packages > (that rebuild the whole world). I guess we could have a “pulseaudio-update” branch then. > BTW do you still have problems with using guix repo through ssh? I do, > I mean I can't push or fetch. And as I see that other people commit to > the guix repo, I begin to think that it's only me who have this problem. I still have problems with it with that so I haven’t yet pushed anything for about one week. ~~ Ricardo ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-06-28 5:47 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-05-14 9:43 [PATCH] Add Bluetooth support to Pulseaudio Ricardo Wurmus 2016-05-14 9:43 ` [PATCH] gnu: pulseaudio: Enable support for Bluetooth Ricardo Wurmus 2016-05-16 21:01 ` Ludovic Courtès 2016-06-28 6:36 ` Ricardo Wurmus 2016-05-14 16:54 ` [PATCH] Add Bluetooth support to Pulseaudio Alex Kost 2016-05-14 17:14 ` Danny Milosavljevic 2016-05-14 19:59 ` Efraim Flashner 2016-05-15 8:27 ` Alex Kost 2016-05-15 8:36 ` Efraim Flashner 2016-05-15 12:42 ` Ricardo Wurmus
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/guix.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).