;;; GNU Guix --- Functional package management for GNU
;;; Copyright © 2016, 2017, 2018, 2019, 2020 Ludovic Courtès <ludo@gnu.org>
;;; Copyright © 2017, 2019, 2021 Tobias Geerinckx-Rice <me@tobias.gr>
;;; Copyright © 2020 Mathieu Othacehe <m.othacehe@gmail.com>
;;; Copyright © 2020 Danny Milosavljevic <dannym@scratchpost.org>
;;; Copyright © 2020 Jan (janneke) Nieuwenhuizen <janneke@gnu.org>
;;; Copyright © 2020, 2021 Maxim Cournoyer <maxim.cournoyer@gmail.com>
;;;
;;; This file is part of GNU Guix.
;;;
;;; GNU Guix is free software; you can redistribute it and/or modify it
;;; under the terms of the GNU General Public License as published by
;;; the Free Software Foundation; either version 3 of the License, or (at
;;; your option) any later version.
;;;
;;; GNU Guix is distributed in the hope that it will be useful, but
;;; WITHOUT ANY WARRANTY; without even the implied warranty of
;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;;; GNU General Public License for more details.
;;;
;;; You should have received a copy of the GNU General Public License
;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.

(define-module (gnu tests install)
  #:use-module (gnu)
  #:use-module (gnu bootloader extlinux)
  #:use-module (gnu image)
  #:use-module (gnu tests)
  #:use-module (gnu tests base)
  #:use-module (gnu system)
  #:use-module (gnu system image)
  #:use-module (gnu system install)
  #:use-module (gnu system vm)
  #:use-module ((gnu build vm) #:select (qemu-command))
  #:use-module (gnu packages admin)
  #:use-module (gnu packages bootloaders)
  #:use-module (gnu packages commencement)       ;for 'guile-final'
  #:use-module (gnu packages cryptsetup)
  #:use-module (gnu packages disk)
  #:use-module (gnu packages emacs)
  #:use-module (gnu packages emacs-xyz)
  #:use-module (gnu packages firmware)
  #:use-module (gnu packages linux)
  #:use-module (gnu packages ocr)
  #:use-module (gnu packages openbox)
  #:use-module (gnu packages package-management)
  #:use-module (gnu packages ratpoison)
  #:use-module (gnu packages suckless)
  #:use-module (gnu packages virtualization)
  #:use-module (gnu packages wm)
  #:use-module (gnu packages xorg)
  #:use-module (gnu services desktop)
  #:use-module (gnu services networking)
  #:use-module (gnu services xorg)
  #:use-module (guix store)
  #:use-module (guix monads)
  #:use-module (guix packages)
  #:use-module (guix grafts)
  #:use-module (guix gexp)
  #:use-module (guix utils)
  #:use-module (srfi srfi-1)
  #:export (%test-installed-os
            %test-installed-extlinux-os
            %test-iso-image-installer
            %test-separate-store-os
            %test-separate-home-os
            %test-raid-root-os
            %test-encrypted-root-os
            %test-encrypted-root-not-boot-os
            %test-btrfs-root-os
            %test-btrfs-root-on-subvolume-os
            %test-btrfs-raid-root-os
            %test-jfs-root-os
            %test-f2fs-root-os
            %test-lvm-separate-home-os

            %test-gui-installed-os
            %test-gui-uefi-installed-os
            %test-gui-installed-os-encrypted
            %test-gui-installed-desktop-os-encrypted))

;;; Commentary:
;;;
;;; Test the installation of Guix using the documented approach at the
;;; command line.
;;;
;;; Code:

(define-os-with-source (%minimal-os %minimal-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "ext4"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "alice")
                  (comment "Bob's sister")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix build utils)
                                                  (guix combinators)))))
                    %base-services))))

(define (operating-system-add-packages os packages)
  "Append PACKAGES to OS packages list."
  (operating-system
    (inherit os)
    (packages (append packages (operating-system-packages os)))))

(define-os-with-source (%minimal-extlinux-os
                        %minimal-extlinux-os-source)
  (use-modules (gnu) (gnu tests) (gnu bootloader extlinux)
               (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader extlinux-bootloader-gpt)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "ext4"))
                        %base-file-systems))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define (operating-system-with-current-guix os)
  "Return a variant of OS that uses the current Guix."
  (operating-system
    (inherit os)
    (services (modify-services (operating-system-user-services os)
                (guix-service-type config =>
                                   (guix-configuration
                                    (inherit config)
                                    (guix (current-guix))))))))

\f
(define MiB (expt 2 20))

(define %simple-installation-script
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
guix build isc-dhcp
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.6G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.ext4 -L my-root /dev/vdb2
mount /dev/vdb2 /mnt
df -h /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %extlinux-gpt-installation-script
  ;; Shell script of a simple installation.
  ;; As syslinux 6.0.3 does not handle 64bits ext4 partitions,
  ;; we make sure to pass -O '^64bit' to mkfs.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
guix build isc-dhcp
parted --script /dev/vdb mklabel gpt \\
  mkpart ext2 1M 1.6G \\
  set 1 legacy_boot on
mkfs.ext4 -L my-root -O '^64bit' /dev/vdb1
mount /dev/vdb1 /mnt
df -h /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define (uefi-firmware system)
  "Return the appropriate QEMU OVMF UEFI firmware for the given SYSTEM."
  (cond
   ((string-prefix? "x86_64" system)
    (file-append ovmf "/share/firmware/ovmf_x64.bin"))
   ((string-prefix? "i686" system)
    (file-append ovmf "/share/firmware/ovmf_ia32.bin"))
   (else #f)))

(define* (run-install target-os target-os-source
                      #:key
                      (script %simple-installation-script)
                      (gui-test #f)
                      (packages '())
                      (os (marionette-operating-system
                           (operating-system
                             ;; Since the image has no network access, use the
                             ;; current Guix so the store items we need are in
                             ;; the image and add packages provided.
                             (inherit (operating-system-add-packages
                                       (operating-system-with-current-guix
                                        installation-os)
                                       packages))
                             (kernel-arguments '("console=ttyS0")))
                           #:imported-modules '((gnu services herd)
                                                (gnu installer tests)
                                                (guix combinators))))
                      (uefi-support? #f)
                      (installation-image-type 'efi-raw)
                      (install-size 'guess)
                      (target-size (* 2200 MiB)))
  "Run SCRIPT (a shell script following the system installation procedure) in
OS to install TARGET-OS.  Return a VM image of TARGET-SIZE bytes containing
the installed system.  The packages specified in PACKAGES will be appended to
packages defined in installation-os."

  (mlet* %store-monad ((_      (set-grafting #f))
                       (system (current-system))

                       (uefi-firmware -> (and uefi-support?
                                              (uefi-firmware system)))
                       ;; Since the installation system has no network access,
                       ;; we cheat a little bit by adding TARGET to its GC
                       ;; roots.  This way, we know 'guix system init' will
                       ;; succeed.  Also add guile-final, which is pulled in
                       ;; through provenance.drv and may not always be present.
                       (target (operating-system-derivation target-os))
                       (base-image ->
                                   (os->image
                                    (operating-system-with-gc-roots
                                     os (list target guile-final))
                                    #:type (lookup-image-type-by-name
                                            installation-image-type)))
                       (image ->
                              (system-image
                               (image
                                (inherit base-image)
                                (size install-size)

                                ;; Don't provide substitutes; too big.
                                (substitutable? #f)))))
    (define install
      (with-imported-modules '((guix build utils)
                               (gnu build marionette))
        #~(begin
            (use-modules (guix build utils)
                         (gnu build marionette))

            (set-path-environment-variable "PATH" '("bin")
                                           (list #$qemu-minimal))

            (system* "qemu-img" "create" "-f" "qcow2"
                     #$output #$(number->string target-size))

            (define marionette
              (make-marionette
               `(,(which #$(qemu-command system))
                 "-no-reboot"
                 "-m" "1200"
                 ,@(if #$uefi-firmware
                       '("-bios" #$uefi-firmware)
                       '())
                 #$@(cond
                     ((eq? 'efi-raw installation-image-type)
                      #~("-drive"
                         ,(string-append "file=" #$image
                                         ",if=virtio,readonly")))
                     ((eq? 'uncompressed-iso9660 installation-image-type)
                      #~("-cdrom" #$image))
                     (else
                      (error
                       "unsupported installation-image-type:"
                       installation-image-type)))
                 "-drive"
                 ,(string-append "file=" #$output ",if=virtio")
                 ,@(if (file-exists? "/dev/kvm")
                       '("-enable-kvm")
                       '()))))

            (pk 'uname (marionette-eval '(uname) marionette))

            ;; Wait for tty1.
            (marionette-eval '(begin
                                (use-modules (gnu services herd))
                                (start 'term-tty1))
                             marionette)

            (when #$(->bool script)
              (marionette-eval '(call-with-output-file "/etc/target-config.scm"
                                  (lambda (port)
                                    (write '#$target-os-source port)))
                               marionette)

              ;; Run SCRIPT.  It typically invokes 'reboot' as a last step and
              ;; thus normally gets killed with SIGTERM by PID 1.
              (let ((status (marionette-eval '(system #$script) marionette)))
                (exit (or (eof-object? status)
                          (equal? (status:term-sig status) SIGTERM)
                          (equal? (status:exit-val status) 0)))))

            (when #$(->bool gui-test)
              (wait-for-unix-socket "/var/guix/installer-socket"
                                    marionette)
              (format #t "installer socket ready~%")
              (force-output)
              (exit #$(and gui-test
                           (gui-test #~marionette)))))))

    (gexp->derivation "installation" install
                      #:substitutable? #f)))      ;too big

(define* (qemu-command/writable-image image
                                      #:key
                                      (uefi-support? #f)
                                      (memory-size 256))
  "Return as a monadic value the command to run QEMU on a writable copy of
IMAGE, a disk image.  The QEMU VM has access to MEMORY-SIZE MiB of RAM."
  (mlet* %store-monad ((system (current-system))
                       (uefi-firmware -> (and uefi-support?
                                              (uefi-firmware system))))
    (return #~(let ((image #$image))
                ;; First we need a writable copy of the image.
                (format #t "creating writable image from '~a'...~%" image)
                (unless (zero? (system* #+(file-append qemu-minimal
                                                       "/bin/qemu-img")
                                        "create" "-f" "qcow2"
                                        "-o"
                                        (string-append "backing_file=" image)
                                        "disk.img"))
                  (error "failed to create writable QEMU image" image))

                (chmod "disk.img" #o644)
                `(,(string-append #$qemu-minimal "/bin/"
                                  #$(qemu-command system))
                  ,@(if (file-exists? "/dev/kvm")
                        '("-enable-kvm")
                        '())
                  ,@(if #$uefi-firmware
                        '("-bios" #$uefi-firmware)
                        '())
                  "-no-reboot" "-m" #$(number->string memory-size)
                  "-drive" "file=disk.img,if=virtio")))))

(define %test-installed-os
  (system-test
   (name "installed-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad ((image   (run-install %minimal-os %minimal-os-source))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %minimal-os command
                      "installed-os")))))

(define %test-installed-extlinux-os
  (system-test
   (name "installed-extlinux-os")
   (description
    "Test basic functionality of an OS booted with an extlinux bootloader.  As
per %test-installed-os, this test is expensive in terms of CPU and storage.")
   (value
    (mlet* %store-monad ((image (run-install %minimal-extlinux-os
                                             %minimal-extlinux-os-source
                                             #:packages
                                             (list syslinux)
                                             #:script
                                             %extlinux-gpt-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %minimal-extlinux-os command
                      "installed-extlinux-os")))))

\f
;;;
;;; Installation through an ISO image.
;;;

(define-os-with-source (%minimal-os-on-vda %minimal-os-on-vda-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vda"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "ext4"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "alice")
                  (comment "Bob's sister")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix build utils)
                                                  (guix combinators)))))
                    %base-services))))

(define %simple-installation-script-for-/dev/vda
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
guix build isc-dhcp
parted --script /dev/vda mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.6G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.ext4 -L my-root /dev/vda2
mount /dev/vda2 /mnt
df -h /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-iso-image-installer
  (system-test
   (name "iso-image-installer")
   (description
    "")
   (value
    (mlet* %store-monad ((image   (run-install
                                   %minimal-os-on-vda
                                   %minimal-os-on-vda-source
                                   #:script
                                   %simple-installation-script-for-/dev/vda
                                   #:installation-image-type
                                   'uncompressed-iso9660))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %minimal-os-on-vda command name)))))

\f
;;;
;;; Separate /home.
;;;

(define-os-with-source (%separate-home-os %separate-home-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.utf8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (target "/dev/vdb")))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons* (file-system
                           (device (file-system-label "my-root"))
                           (mount-point "/")
                           (type "ext4"))
                         (file-system
                           (device "none")
                           (mount-point "/home")
                           (type "tmpfs"))
                         %base-file-systems))
    (users (cons* (user-account
                   (name "alice")
                   (group "users"))
                  (user-account
                   (name "charlie")
                   (group "users"))
                  %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %test-separate-home-os
  (system-test
   (name "separate-home-os")
   (description
    "Test basic functionality of an installed OS with a separate /home
partition.  In particular, home directories must be correctly created (see
<https://bugs.gnu.org/21108>).")
   (value
    (mlet* %store-monad ((image   (run-install %separate-home-os
                                               %separate-home-os-source
                                               #:script
                                               %simple-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %separate-home-os command "separate-home-os")))))

\f
;;;
;;; Separate /gnu/store partition.
;;;

(define-os-with-source (%separate-store-os %separate-store-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons* (file-system
                           (device (file-system-label "root-fs"))
                           (mount-point "/")
                           (type "ext4"))
                         (file-system
                           (device (file-system-label "store-fs"))
                           (mount-point "/gnu")
                           (type "ext4"))
                         %base-file-systems))
    (users %base-user-accounts)
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %separate-store-installation-script
  ;; Installation with a separate /gnu partition.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
guix build isc-dhcp
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 400M \\
  mkpart primary ext2 400M 2.1G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.ext4 -L root-fs /dev/vdb2
mkfs.ext4 -L store-fs /dev/vdb3
mount /dev/vdb2 /mnt
mkdir /mnt/gnu
mount /dev/vdb3 /mnt/gnu
df -h /mnt
df -h /mnt/gnu
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-separate-store-os
  (system-test
   (name "separate-store-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand,
where /gnu lives on a separate partition.")
   (value
    (mlet* %store-monad ((image   (run-install %separate-store-os
                                               %separate-store-os-source
                                               #:script
                                               %separate-store-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %separate-store-os command "separate-store-os")))))

\f
;;;
;;; RAID root device.
;;;

(define-os-with-source (%raid-root-os %raid-root-os-source)
  ;; An OS whose root partition is a RAID partition.
  (use-modules (gnu) (gnu tests))

  (operating-system
    (host-name "raidified")
    (timezone "Europe/Paris")
    (locale "en_US.utf8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))

    ;; Add a kernel module for RAID-1 (aka. "mirror").
    (initrd-modules (cons "raid1" %base-initrd-modules))

    (mapped-devices (list (mapped-device
                           (source (list "/dev/vda2" "/dev/vda3"))
                           (target "/dev/md0")
                           (type raid-device-mapping))))
    (file-systems (cons (file-system
                          (device (file-system-label "root-fs"))
                          (mount-point "/")
                          (type "ext4")
                          (dependencies mapped-devices))
                        %base-file-systems))
    (users %base-user-accounts)
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %raid-root-installation-script
  ;; Installation with a separate /gnu partition.  See
  ;; <https://raid.wiki.kernel.org/index.php/RAID_setup> for more on RAID and
  ;; mdadm.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.6G \\
  mkpart primary ext2 1.6G 3.2G \\
  set 1 boot on \\
  set 1 bios_grub on
yes | mdadm --create /dev/md0 --verbose --level=mirror --raid-devices=2 \\
  /dev/vdb2 /dev/vdb3
mkfs.ext4 -L root-fs /dev/md0
mount /dev/md0 /mnt
df -h /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-raid-root-os
  (system-test
   (name "raid-root-os")
   (description
    "Test functionality of an OS installed with a RAID root partition managed
by 'mdadm'.")
   (value
    (mlet* %store-monad ((image   (run-install %raid-root-os
                                               %raid-root-os-source
                                               #:script
                                               %raid-root-installation-script
                                               #:target-size (* 3200 MiB)))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %raid-root-os
                      `(,@command) "raid-root-os")))))

\f
;;;
;;; LUKS-encrypted root file system.
;;;

(define-os-with-source (%encrypted-root-os %encrypted-root-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (target "/dev/vdb")))

    ;; Note: Do not pass "console=ttyS0" so we can use our passphrase prompt
    ;; detection logic in 'enter-luks-passphrase'.

    (mapped-devices (list (mapped-device
                           (source (uuid "12345678-1234-1234-1234-123456789abc"))
                           (target "the-root-device")
                           (type luks-device-mapping))))
    (file-systems (cons (file-system
                          (device "/dev/mapper/the-root-device")
                          (mount-point "/")
                          (type "ext4"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "charlie")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %luks-passphrase
  ;; LUKS encryption passphrase used in tests.
  "thepassphrase")

(define %encrypted-root-installation-script
  ;; Shell script of a simple installation.
  (string-append "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.6G \\
  set 1 boot on \\
  set 1 bios_grub on
echo -n " %luks-passphrase " | \\
  cryptsetup luksFormat --uuid=12345678-1234-1234-1234-123456789abc -q /dev/vdb2 -
echo -n " %luks-passphrase " | \\
  cryptsetup open --type luks --key-file - /dev/vdb2 the-root-device
mkfs.ext4 -L my-root /dev/mapper/the-root-device
mount LABEL=my-root /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n"))

(define (enter-luks-passphrase marionette)
  "Return a gexp to be inserted in the basic system test running on MARIONETTE
to enter the LUKS passphrase."
  (let ((ocrad (file-append ocrad "/bin/ocrad")))
    #~(begin
        (define (passphrase-prompt? text)
          (string-contains (pk 'screen-text text) "Enter pass"))

        (define (bios-boot-screen? text)
          ;; Return true if TEXT corresponds to the boot screen, before GRUB's
          ;; menu.
          (string-prefix? "SeaBIOS" text))

        (test-assert "enter LUKS passphrase for GRUB"
          (begin
            ;; At this point we have no choice but to use OCR to determine
            ;; when the passphrase should be entered.
            (wait-for-screen-text #$marionette passphrase-prompt?
                                  #:ocrad #$ocrad)
            (marionette-type #$(string-append %luks-passphrase "\n")
                             #$marionette)

            ;; Now wait until we leave the boot screen.  This is necessary so
            ;; we can then be sure we match the "Enter passphrase" prompt from
            ;; 'cryptsetup', in the initrd.
            (wait-for-screen-text #$marionette (negate bios-boot-screen?)
                                  #:ocrad #$ocrad
                                  #:timeout 20)))

        (test-assert "enter LUKS passphrase for the initrd"
          (begin
            ;; XXX: Here we use OCR as well but we could instead use QEMU
            ;; '-serial stdio' and run it in an input pipe,
            (wait-for-screen-text #$marionette passphrase-prompt?
                                  #:ocrad #$ocrad
                                  #:timeout 60)
            (marionette-type #$(string-append %luks-passphrase "\n")
                             #$marionette)

            ;; Take a screenshot for debugging purposes.
            (marionette-control (string-append "screendump " #$output
                                               "/post-initrd-passphrase.ppm")
                                #$marionette))))))

(define %test-encrypted-root-os
  (system-test
   (name "encrypted-root-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad ((image   (run-install %encrypted-root-os
                                               %encrypted-root-os-source
                                               #:script
                                               %encrypted-root-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %encrypted-root-os command "encrypted-root-os"
                      #:initialization enter-luks-passphrase)))))

\f
;;;
;;; Separate /home on LVM
;;;

;; Since LVM support in guix currently doesn't allow root-on-LVM we use /home on LVM
(define-os-with-source (%lvm-separate-home-os %lvm-separate-home-os-source)
  (use-modules (gnu) (gnu tests))

  (operating-system
    (host-name "separate-home-on-lvm")
    (timezone "Europe/Paris")
    (locale "en_US.utf8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))

    (mapped-devices (list (mapped-device
                           (source "vg0")
                           (target "vg0-home")
                           (type lvm-device-mapping))))
    (file-systems (cons* (file-system
                           (device (file-system-label "root-fs"))
                           (mount-point "/")
                           (type "ext4"))
                         (file-system
                           (device "/dev/mapper/vg0-home")
                           (mount-point "/home")
                           (type "ext4")
                           (dependencies mapped-devices))
                        %base-file-systems))
    (users %base-user-accounts)
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %lvm-separate-home-installation-script
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.6G \\
  mkpart primary 1.6G 3.2G \\
  set 1 boot on \\
  set 1 bios_grub on
pvcreate /dev/vdb3
vgcreate vg0 /dev/vdb3
lvcreate -L 1.6G -n home vg0
vgchange -ay
mkfs.ext4 -L root-fs /dev/vdb2
mkfs.ext4 /dev/mapper/vg0-home
mount /dev/vdb2 /mnt
mkdir /mnt/home
mount /dev/mapper/vg0-home /mnt/home
df -h /mnt /mnt/home
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-lvm-separate-home-os
  (system-test
   (name "lvm-separate-home-os")
   (description
    "Test functionality of an OS installed with a LVM /home partition")
   (value
    (mlet* %store-monad ((image   (run-install %lvm-separate-home-os
                                               %lvm-separate-home-os-source
                                               #:script
                                               %lvm-separate-home-installation-script
                                               #:packages (list lvm2-static)
                                               #:target-size (* 3200 MiB)))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %lvm-separate-home-os
                      `(,@command) "lvm-separate-home-os")))))

\f
;;;
;;; LUKS-encrypted root file system and /boot in a non-encrypted partition.
;;;

(define-os-with-source (%encrypted-root-not-boot-os
                        %encrypted-root-not-boot-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "bootroot")
    (timezone "Europe/Madrid")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))

    (mapped-devices (list (mapped-device
                           (source
                            (uuid "12345678-1234-1234-1234-123456789abc"))
                           (target "root")
                           (type luks-device-mapping))))
    (file-systems (cons* (file-system
                           (device (file-system-label "my-boot"))
                           (mount-point "/boot")
                           (type "ext4"))
                         (file-system
                           (device "/dev/mapper/root")
                           (mount-point "/")
                           (type "ext4"))
                         %base-file-systems))
    (users (cons (user-account
                  (name "alice")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %encrypted-root-not-boot-installation-script
  ;; Shell script for an installation with boot not encrypted but root
  ;; encrypted.
  (format #f "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 50M \\
  mkpart primary ext2 50M 1.6G \\
  set 1 boot on \\
  set 1 bios_grub on
echo -n \"~a\" | cryptsetup luksFormat --uuid=\"~a\" -q /dev/vdb3 -
echo -n \"~a\" | cryptsetup open --type luks --key-file - /dev/vdb3 root
mkfs.ext4 -L my-root /dev/mapper/root
mkfs.ext4 -L my-boot /dev/vdb2
mount LABEL=my-root /mnt
mkdir /mnt/boot
mount LABEL=my-boot /mnt/boot
echo \"Checking mounts\"
mount
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
echo \"Debugging info\"
blkid
cat /mnt/boot/grub/grub.cfg
reboot\n"
          %luks-passphrase "12345678-1234-1234-1234-123456789abc"
          %luks-passphrase))

(define %test-encrypted-root-not-boot-os
  (system-test
   (name "encrypted-root-not-boot-os")
   (description
    "Test the manual installation on an OS with / in an encrypted partition
but /boot on a different, non-encrypted partition.  This test is expensive in
terms of CPU and storage usage since we need to build (current-guix) and then
store a couple of full system images.")
   (value
    (mlet* %store-monad
        ((image (run-install %encrypted-root-not-boot-os
                             %encrypted-root-not-boot-os-source
                             #:script
                             %encrypted-root-not-boot-installation-script))
         (command (qemu-command/writable-image image)))
      (run-basic-test %encrypted-root-not-boot-os command
                      "encrypted-root-not-boot-os"
                      #:initialization enter-luks-passphrase)))))

\f
;;;
;;; Btrfs root file system.
;;;

(define-os-with-source (%btrfs-root-os %btrfs-root-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "btrfs"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "charlie")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %btrfs-root-installation-script
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 2G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.btrfs -L my-root /dev/vdb2
mount /dev/vdb2 /mnt
btrfs subvolume create /mnt/home
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-btrfs-root-os
  (system-test
   (name "btrfs-root-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad ((image   (run-install %btrfs-root-os
                                               %btrfs-root-os-source
                                               #:script
                                               %btrfs-root-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %btrfs-root-os command "btrfs-root-os")))))


\f
;;;
;;; Btrfs RAID-0 root file system.
;;;
(define-os-with-source (%btrfs-raid-root-os %btrfs-raid-root-os-source)
  ;; An OS whose root partition is a RAID partition.
  (use-modules (gnu) (gnu tests))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.utf8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))

    (file-systems (cons (file-system
                          (device (file-system-label "root-fs"))
                          (mount-point "/")
                          (type "btrfs"))
                        %base-file-systems))
    (users %base-user-accounts)
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %btrfs-raid-root-installation-script
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 1.4G \\
  mkpart primary ext2 1.4G 2.8G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.btrfs -L root-fs -d raid0 -m raid0 /dev/vdb2 /dev/vdb3
mount /dev/vdb2 /mnt
df -h /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-btrfs-raid-root-os
  (system-test
   (name "btrfs-raid-root-os")
   (description "Test functionality of an OS installed with a Btrfs
RAID-0 (stripe) root partition.")
   (value
    (mlet* %store-monad
        ((image (run-install %btrfs-raid-root-os
                             %btrfs-raid-root-os-source
                             #:script %btrfs-raid-root-installation-script
                             #:target-size (* 2800 MiB)))
         (command (qemu-command/writable-image image)))
      (run-basic-test %btrfs-raid-root-os `(,@command) "btrfs-raid-root-os")))))

\f
;;;
;;; Btrfs root file system on a subvolume.
;;;

(define-os-with-source (%btrfs-root-on-subvolume-os
                        %btrfs-root-on-subvolume-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "hurd")
    (timezone "America/Montreal")
    (locale "en_US.UTF-8")
    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons* (file-system
                           (device (file-system-label "btrfs-pool"))
                           (mount-point "/")
                           (options "subvol=rootfs,compress=zstd")
                           (type "btrfs"))
                         (file-system
                           (device (file-system-label "btrfs-pool"))
                           (mount-point "/home")
                           (options "subvol=homefs,compress=lzo")
                           (type "btrfs"))
                         %base-file-systems))
    (users (cons (user-account
                  (name "charlie")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %btrfs-root-on-subvolume-installation-script
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 2G \\
  set 1 boot on \\
  set 1 bios_grub on

# Setup the top level Btrfs file system with its subvolume.
mkfs.btrfs -L btrfs-pool /dev/vdb2
mount /dev/vdb2 /mnt
btrfs subvolume create /mnt/rootfs
btrfs subvolume create /mnt/homefs
umount /dev/vdb2

# Mount the subvolumes, ready for installation.
mount LABEL=btrfs-pool -o 'subvol=rootfs,compress=zstd' /mnt
mkdir /mnt/home
mount LABEL=btrfs-pool -o 'subvol=homefs,compress=zstd' /mnt/home

herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-btrfs-root-on-subvolume-os
  (system-test
   (name "btrfs-root-on-subvolume-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad
        ((image
          (run-install %btrfs-root-on-subvolume-os
                       %btrfs-root-on-subvolume-os-source
                       #:script
                       %btrfs-root-on-subvolume-installation-script))
         (command (qemu-command/writable-image image)))
      (run-basic-test %btrfs-root-on-subvolume-os command
                      "btrfs-root-on-subvolume-os")))))

\f
;;;
;;; JFS root file system.
;;;

(define-os-with-source (%jfs-root-os %jfs-root-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "jfs"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "charlie")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %jfs-root-installation-script
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 2G \\
  set 1 boot on \\
  set 1 bios_grub on
jfs_mkfs -L my-root -q /dev/vdb2
mount /dev/vdb2 /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-jfs-root-os
  (system-test
   (name "jfs-root-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad ((image   (run-install %jfs-root-os
                                               %jfs-root-os-source
                                               #:script
                                               %jfs-root-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %jfs-root-os command "jfs-root-os")))))

\f
;;;
;;; F2FS root file system.
;;;

(define-os-with-source (%f2fs-root-os %f2fs-root-os-source)
  ;; The OS we want to install.
  (use-modules (gnu) (gnu tests) (srfi srfi-1))

  (operating-system
    (host-name "liberigilo")
    (timezone "Europe/Paris")
    (locale "en_US.UTF-8")

    (bootloader (bootloader-configuration
                 (bootloader grub-bootloader)
                 (targets (list "/dev/vdb"))))
    (kernel-arguments '("console=ttyS0"))
    (file-systems (cons (file-system
                          (device (file-system-label "my-root"))
                          (mount-point "/")
                          (type "f2fs"))
                        %base-file-systems))
    (users (cons (user-account
                  (name "charlie")
                  (group "users")
                  (supplementary-groups '("wheel" "audio" "video")))
                 %base-user-accounts))
    (services (cons (service marionette-service-type
                             (marionette-configuration
                              (imported-modules '((gnu services herd)
                                                  (guix combinators)))))
                    %base-services))))

(define %f2fs-root-installation-script
  ;; Shell script of a simple installation.
  "\
. /etc/profile
set -e -x
guix --version

export GUIX_BUILD_OPTIONS=--no-grafts
ls -l /run/current-system/gc-roots
parted --script /dev/vdb mklabel gpt \\
  mkpart primary ext2 1M 3M \\
  mkpart primary ext2 3M 2G \\
  set 1 boot on \\
  set 1 bios_grub on
mkfs.f2fs -l my-root -q /dev/vdb2
mount /dev/vdb2 /mnt
herd start cow-store /mnt
mkdir /mnt/etc
cp /etc/target-config.scm /mnt/etc/config.scm
guix system build /mnt/etc/config.scm
guix system init /mnt/etc/config.scm /mnt --no-substitutes
sync
reboot\n")

(define %test-f2fs-root-os
  (system-test
   (name "f2fs-root-os")
   (description
    "Test basic functionality of an OS installed like one would do by hand.
This test is expensive in terms of CPU and storage usage since we need to
build (current-guix) and then store a couple of full system images.")
   (value
    (mlet* %store-monad ((image   (run-install %f2fs-root-os
                                               %f2fs-root-os-source
                                               #:script
                                               %f2fs-root-installation-script))
                         (command (qemu-command/writable-image image)))
      (run-basic-test %f2fs-root-os command "f2fs-root-os")))))

\f
;;;
;;; Installation through the graphical interface.
;;;

(define %syslog-conf
  ;; Syslog configuration that dumps to /dev/console, so we can see the
  ;; installer's messages during the test.
  (computed-file "syslog.conf"
                 #~(begin
                     (copy-file #$%default-syslog.conf #$output)
                     (chmod #$output #o644)
                     (let ((port (open-file #$output "a")))
                       (display "\n*.info /dev/console\n" port)
                       #t))))

(define (operating-system-with-console-syslog os)
  "Return OS with a syslog service that writes to /dev/console."
  (operating-system
    (inherit os)
    (services (modify-services (operating-system-user-services os)
                (syslog-service-type config
                                     =>
                                     (syslog-configuration
                                      (inherit config)
                                      (config-file %syslog-conf)))))))

(define %root-password "foo")

(define* (gui-test-program marionette
                           #:key
                           (desktop? #f)
                           (encrypted? #f)
                           (uefi-support? #f)
                           (system (%current-system)))
  #~(let ()
      (define (screenshot file)
        (marionette-control (string-append "screendump " file)
                            #$marionette))

      (define-syntax-rule (marionette-eval* exp marionette)
        (or (marionette-eval exp marionette)
            (throw 'marionette-eval-failure 'exp)))

      (setvbuf (current-output-port) 'none)
      (setvbuf (current-error-port) 'none)

      (marionette-eval* '(use-modules (gnu installer tests))
                        #$marionette)

      ;; Arrange so that 'converse' prints debugging output to the console.
      (marionette-eval* '(let ((console (open-output-file "/dev/console")))
                           (setvbuf console 'none)
                           (conversation-log-port console))
                        #$marionette)

      ;; Tell the installer to not wait for the Connman "online" status.
      (marionette-eval* '(call-with-output-file "/tmp/installer-assume-online"
                           (const #t))
                        #$marionette)

      ;; Run 'guix system init' with '--no-grafts', to cope with the lack of
      ;; network access.
      (marionette-eval* '(call-with-output-file
                             "/tmp/installer-system-init-options"
                           (lambda (port)
                             (write '("--no-grafts" "--no-substitutes")
                                    port)))
                        #$marionette)

      (marionette-eval* '(define installer-socket
                           (open-installer-socket))
                        #$marionette)
      (screenshot "installer-start.ppm")

      (marionette-eval* '(choose-locale+keyboard installer-socket)
                        #$marionette)
      (screenshot "installer-locale.ppm")

      ;; Choose the host name that the "basic" test expects.
      (marionette-eval* '(enter-host-name+passwords installer-socket
                                                    #:host-name "liberigilo"
                                                    #:root-password
                                                    #$%root-password
                                                    #:users
                                                    '(("alice" "pass1")
                                                      ("bob" "pass2")))
                        #$marionette)
      (screenshot "installer-services.ppm")

      (marionette-eval* '(choose-services installer-socket
                                          #:choose-desktop-environment?
                                          (const #$desktop?)
                                          #:choose-network-service?
                                          (const #f))
                        #$marionette)
      (screenshot "installer-partitioning.ppm")

      (marionette-eval* '(choose-partitioning installer-socket
                                              #:encrypted? #$encrypted?
                                              #:passphrase #$%luks-passphrase
                                              #:uefi-support? #$uefi-support?)
                        #$marionette)
      (screenshot "installer-run.ppm")

      (unless #$encrypted?
        ;; At this point, user partitions are formatted and the installer is
        ;; waiting for us to start the final step: generating the
        ;; configuration file, etc.  Set a fixed UUID on the swap partition
        ;; that matches what 'installation-target-os-for-gui-tests' expects.
        (marionette-eval* '(invoke #$(file-append util-linux "/sbin/swaplabel")
                                   "-U" "11111111-2222-3333-4444-123456789abc"
                                   "/dev/vda2")
                          #$marionette))

      (marionette-eval* '(start-installation installer-socket)
                        #$marionette)

      ;; XXX: The grub-install process uses efibootmgr to add an UEFI Guix
      ;; boot entry. The corresponding UEFI variable is stored in RAM, and
      ;; possibly saved persistently on QEMU reboot in a NvVars file, see:
      ;; https://lists.gnu.org/archive/html/qemu-discuss/2018-04/msg00045.html.
      ;;
      ;; As we are running QEMU with the no-reboot flag, this variable is
      ;; never saved persistently, QEMU fails to boot the installed system and
      ;; an UEFI shell is displayed instead.
      ;;
      ;; To make the installed UEFI system bootable, register Grub as the
      ;; default UEFI boot entry, in the same way as if grub-install was
      ;; invoked with the --removable option.
      (when #$uefi-support?
        (marionette-eval*
         '(begin
            (use-modules (ice-9 match))
            (let ((targets (cond
                            ((string-prefix? "x86_64" #$system)
                             '("grubx64.efi" "BOOTX64.EFI"))
                            ((string-prefix? "i686" #$system)
                             '("grubia32.efi" "BOOTIA32.EFI"))
                            (else #f))))
              (match targets
                ((src dest)
                 (rename-file "/mnt/boot/efi/EFI/Guix"
                              "/mnt/boot/efi/EFI/BOOT")
                 (rename-file
                  (string-append "/mnt/boot/efi/EFI/BOOT/" src)
                  (string-append "/mnt/boot/efi/EFI/BOOT/" dest)))
                (_ #f))))
         #$marionette))

      (marionette-eval* '(complete-installation installer-socket)
                        #$marionette)
      (sync)
      #t))

(define %extra-packages
  ;; Packages needed when installing with an encrypted root.
  (list isc-dhcp
        lvm2-static cryptsetup-static e2fsck/static
        loadkeys-static grub-efi fatfsck/static dosfstools))

(define installation-os-for-gui-tests
  ;; Operating system that contains all of %EXTRA-PACKAGES, needed for the
  ;; target OS, as well as syslog output redirected to the console so we can
  ;; see what the installer is up to.
  (marionette-operating-system
   (operating-system
     (inherit (operating-system-with-console-syslog
               (operating-system-add-packages
                (operating-system-with-current-guix
                 installation-os)
                %extra-packages)))
     (kernel-arguments '("console=ttyS0")))
   #:imported-modules '((gnu services herd)
                        (gnu installer tests)
                        (guix combinators))))

(define* (installation-target-os-for-gui-tests
          #:key
          (encrypted? #f)
          (uefi-support? #f))
  (operating-system
    (inherit %minimal-os-on-vda)
    (file-systems `(,(file-system
                       (device (file-system-label "my-root"))
                       (mount-point "/")
                       (type "ext4"))
                    ,@(if uefi-support?
                          (list (file-system
                                  (device (uuid "1234-ABCD" 'fat))
                                  (mount-point "/boot/efi")
                                  (type "vfat")))
                          '())
                    ,@%base-file-systems))
    (users (append (list (user-account
                          (name "alice")
                          (comment "Bob's sister")
                          (group "users")
                          (supplementary-groups
                           '("wheel" "audio" "video")))
                         (user-account
                          (name "bob")
                          (comment "Alice's brother")
                          (group "users")
                          (supplementary-groups
                           '("wheel" "audio" "video"))))
                   %base-user-accounts))
    ;; The installer does not create a swap device in guided mode with
    ;; encryption support.  The installer produces a UUID for the partition;
    ;; this "UUID" is explicitly set in 'gui-test-program' to the value shown
    ;; below.
    (swap-devices (if encrypted?
                      '()
                      (list (uuid "11111111-2222-3333-4444-123456789abc"))))
    (services (cons (service dhcp-client-service-type)
                    (operating-system-user-services %minimal-os-on-vda)))))

(define* (installation-target-desktop-os-for-gui-tests
          #:key (encrypted? #f))
  (operating-system
    (inherit (installation-target-os-for-gui-tests
              #:encrypted? encrypted?))
    (keyboard-layout (keyboard-layout "us" "altgr-intl"))

    ;; Make sure that all the packages and services that may be used by the
    ;; graphical installer are available.
    (packages (append
               (list openbox awesome i3-wm i3status
                     dmenu st ratpoison xterm
                     emacs emacs-exwm emacs-desktop-environment)
               %base-packages))
    (services
     (append
      (list (service gnome-desktop-service-type)
            (service xfce-desktop-service-type)
            (service mate-desktop-service-type)
            (service enlightenment-desktop-service-type)
            (set-xorg-configuration
             (xorg-configuration
              (keyboard-layout keyboard-layout)))
            (service marionette-service-type
                     (marionette-configuration
                      (imported-modules '((gnu services herd)
                                          (guix build utils)
                                          (guix combinators))))))
      %desktop-services))))

(define* (guided-installation-test name
                                   #:key
                                   (desktop? #f)
                                   (encrypted? #f)
                                   (uefi-support? #f)
                                   target-os
                                   (install-size 'guess)
                                   (target-size (* 2200 MiB)))
  (system-test
   (name name)
   (description
    "Install an OS using the graphical installer and test it.")
   (value
    (mlet* %store-monad
        ((image   (run-install target-os '(this is unused)
                               #:script #f
                               #:os installation-os-for-gui-tests
                               #:uefi-support? uefi-support?
                               #:install-size install-size
                               #:target-size target-size
                               #:installation-image-type
                               'uncompressed-iso9660
                               #:gui-test
                               (lambda (marionette)
                                 (gui-test-program
                                  marionette
                                  #:desktop? desktop?
                                  #:encrypted? encrypted?
                                  #:uefi-support? uefi-support?))))
         (command (qemu-command/writable-image image
                                               #:uefi-support? uefi-support?
                                               #:memory-size 512)))
      (run-basic-test target-os command name
                      #:initialization (and encrypted? enter-luks-passphrase)
                      #:root-password %root-password
                      #:desktop? desktop?)))))

(define %test-gui-installed-os
  (guided-installation-test
   "gui-installed-os"
   #:target-os (installation-target-os-for-gui-tests)))

;; Test the UEFI installation of Guix System using the graphical installer.
(define %test-gui-uefi-installed-os
  (guided-installation-test
   "gui-uefi-installed-os"
   #:uefi-support? #t
   #:target-os (installation-target-os-for-gui-tests
                #:uefi-support? #t)
   #:target-size (* 3200 MiB)))

(define %test-gui-installed-os-encrypted
  (guided-installation-test
   "gui-installed-os-encrypted"
   #:encrypted? #t
   #:target-os (installation-target-os-for-gui-tests
                #:encrypted? #t)))

;; Building a desktop image is very time and space consuming. Install all
;; desktop environments in a single test to reduce the overhead.
(define %test-gui-installed-desktop-os-encrypted
  (guided-installation-test "gui-installed-desktop-os-encrypted"
                            #:desktop? #t
                            #:encrypted? #t
                            #:target-os
                            (installation-target-desktop-os-for-gui-tests
                             #:encrypted? #t)
                            ;; XXX: The disk-image size guess is too low. Use
                            ;; a constant value until this is fixed.
                            #:install-size (* 8000 MiB)
                            #:target-size (* 9000 MiB)))

;;; install.scm ends here