From: Jack Hill <jackhill@jackhill.us>
To: Giovanni Biscuolo <g@xelera.eu>
Cc: 36076@debbugs.gnu.org
Subject: bug#36076: Manual should clarify that glibc-utf8-locales is needed by default on foreign distros
Date: Thu, 6 Jun 2019 00:32:32 -0400 (EDT) [thread overview]
Message-ID: <alpine.DEB.2.20.1906051702120.5164@marsh.hcoop.net> (raw)
In-Reply-To: <87o93ct006.fsf@roquette.mug.biscuolo.net>
[-- Attachment #1: Type: text/plain, Size: 10554 bytes --]
On Wed, 5 Jun 2019, Giovanni Biscuolo wrote:
> Hello Jack,
>
> I'm also on foreign distro so maybe I could help to clarify what's
> missing here
Thanks for helping
> Did you use the last shell installer script [1] you or did it
> "manually" using the last binary tarball?
>
> [1] https://git.savannah.gnu.org/cgit/guix.git/plain/etc/guix-install.sh
I used the shell install script.
> Jack Hill <jackhill@jackhill.us> writes:
>
> [...]
>
>> application setup. I installed the glibc-locales package in both my user's
>> profile and root's so that the locales would be available to
>> guix-daemon.
>
> I installed glibc-utf8-locales in the root profile:
>
> --8<---------------cut here---------------start------------->8---
> glibc-utf8-locales 2.28 out /gnu/store/94k5w17z54w25lgp90czdqfv9m4hwzhq-glibc-utf8-locales-2.28
> --8<---------------cut here---------------end--------------->8---
>
> and both in my user profile:
>
> --8<---------------cut here---------------start------------->8---
> glibc-utf8-locales 2.28 out /gnu/store/94k5w17z54w25lgp90czdqfv9m4hwzhq-glibc-utf8-locales-2.28
> glibc-locales 2.28 out /gnu/store/acl2wxzzkkcjv74rlqswdf9p8pwddlmk-glibc-locales-2.28
> --8<---------------cut here---------------end--------------->8---
>
>> However, I was surprised that even though I had the full set of locales
>> available guix-daemon couldn't find the locale it was looking for.
>
> Please are you able to reproduce the error you got from guix-daemon?
> What's the error message?
I have been able to reproduce this with on a fresh CentOS 7 host with a
freshly installed Guix from the installation script.
I see two error messages. The first occurs anytime a substitute is requested:
```
substitute: /gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
```
The second is in the guix-daemon logs:
```
guix-daemon[37753]: guile: warning: failed to install locale
```
I have included a full terminal session that I believe demonstrates the
problem at the end of this message.
>> This is
>> because the default systemd unit for guix-daemon configures it to use the
>> en_US.utf8 locale which is provided by glibc-utf8-locales (en_US.UTF-8 is
>> in glibc-locales).
>
> Well, actually both en_US.utf8 and en_US.UTF-8 are both in
> glibc-utf8-locales:
>
> --8<---------------cut here---------------start------------->8---
> ~$ ls -lah /var/guix/profiles/per-user/root/guix-profile/lib/locale/2.28/ | grep en_US
> dr-xr-xr-x 3 root root 4.0K Jan 1 1970 en_US.utf8
> lrwxrwxrwx 3 root root 10 Jan 1 1970 en_US.UTF-8 -> en_US.utf8
> --8<---------------cut here---------------end--------------->8---
ah :)
> and glibc-locales
>
> --8<---------------cut here---------------start------------->8---
> $ ls -lah /var/guix/profiles/per-user/giovanni/guix-profile/lib/locale/2.28/ | grep en_US
> lrwxrwxrwx 33 root root 84 Jan 1 1970 en_US -> /gnu/store/acl2wxzzkkcjv74rlqswdf9p8pwddlmk-glibc-locales-2.28/lib/locale/2.28/en_US
> lrwxrwxrwx 33 root root 94 Jan 1 1970 en_US.utf8 -> /gnu/store/94k5w17z54w25lgp90czdqfv9m4hwzhq-glibc-utf8-locales-2.28/lib/locale/2.28/en_US.utf8
> dr-xr-xr-x 3 root root 4.0K Jan 1 1970 en_US.UTF-8
> --8<---------------cut here---------------end--------------->8---
>
> So AFAIU glibc-locales provides both en_US.UTF-8 and en_US.utf8 that is
> used by guix-daemon.
That's not how I read the above lines. It looks like en_US.utf8 is a link
to the 94k5…glib-utf8-locales-2.28 store item.
On my system acl2wxzzkkcjv74rlqswdf9p8pwddlmk-glibc-locales-2.28 does not
contain en_US.utf8
```
$ pwd
/gnu/store/acl2wxzzkkcjv74rlqswdf9p8pwddlmk-glibc-locales-2.28/lib/locale/2.28
$ find -iname '*en_US*'
./en_US
./en_US.UTF-8
Best,
Jack
[root@guix-jackhill-dev-01 ~]# type guix
guix is hashed (/root/.config/guix/current/bin/guix)
[root@guix-jackhill-dev-01 ~]# guix describe
Generation 2 Jun 05 2019 16:52:04 (current)
guix c0f6eeb
repository URL: https://git.savannah.gnu.org/git/guix.git
branch: master
commit: c0f6eebb6d9f6ca9b62344f32ce5f82dab601d53
[root@guix-jackhill-dev-01 ~]# guix package -l
Generation 4 Jun 05 2019 16:53:10 (current)
hello 2.10 out /gnu/store/md2plii4g5sk66wg9cgwc964l3xwhrm9-hello-2.10
glibc-locales 2.28 out /gnu/store/acl2wxzzkkcjv74rlqswdf9p8pwddlmk-glibc-locales-2.28
[root@guix-jackhill-dev-01 ~]# systemctl stop guix-daemon
[root@guix-jackhill-dev-01 ~]# systemctl start guix-daemon
[root@guix-jackhill-dev-01 ~]# systemctl status -l guix-daemon
● guix-daemon.service - Build daemon for GNU Guix
Loaded: loaded (/etc/systemd/system/guix-daemon.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2019-06-05 16:54:24 EDT; 4s ago
Main PID: 37753 (guix-daemon)
Tasks: 1 (limit: 8192)
CGroup: /system.slice/guix-daemon.service
└─37753 guix-daemon --build-users-group=guixbuild
Jun 05 16:54:24 guix-jackhill-dev-01.lib.duke.edu systemd[1]: Started Build daemon for GNU Guix.
Jun 05 16:54:24 guix-jackhill-dev-01.lib.duke.edu guix-daemon[37753]: guile: warning: failed to install locale
[root@guix-jackhill-dev-01 ~]# guix package -i recutils
substitute: /gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
substitute: guile: warning: failed to install locale
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
The following package will be installed:
recutils 1.8 /gnu/store/163pczynvjfq4l6p7nam5sx9wbz07bgz-recutils-1.8
[unrelated lines elided]
/gnu/store/xa0bg9kq6nn82fzssz0wjsw5gnrl8z00-ca-certificate-bundle.drv
/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
guile: warning: failed to install locale
downloading from https://ci.guix.gnu.org/nar/gzip/ism9qw00d9gdhlhiankg72cik02bpnfm-module-import-compiled...
module-import-compiled 121KiB 4.2MiB/s 00:00 [##################] 100.0%
/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
guile: warning: failed to install locale
downloading from https://ci.guix.gnu.org/nar/gzip/f4kalkw0p9ifyiiwvvkd7isrxg8c1qck-attr-2.4.47...
attr-2.4.47 92KiB 3.0MiB/s 00:00 [##################] 100.0%
[more similar lines elided]
/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
guile: warning: failed to install locale
downloading from https://ci.guix.gnu.org/nar/gzip/x412nw28z7swg4zcbb29clgmqzbwp0k6-recutils-1.8...
recutils-1.8 1.1MiB 1.9MiB/s 00:01 [##################] 100.0%
[unrelated lines elided]
building /gnu/store/63hrmvk6rp7bw0iz530ya4a02s14ld6q-profile.drv...
3 packages in profile
[root@guix-jackhill-dev-01 ~]# guix package -i glibc-utf8-locales
The following package will be installed:
glibc-utf8-locales 2.28 /gnu/store/94k5w17z54w25lgp90czdqfv9m4hwzhq-glibc-utf8-locales-2.28
substitute: /gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/bash: warning: setlocale: LC_ALL: cannot change locale (en_US.utf8)
substitute: guile: warning: failed to install locale
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
The following derivation will be built:
/gnu/store/xb5inry74xm915f5pbynp3i1q3qjj6h5-profile.drv
The following profile hooks will be built:
/gnu/store/2dw212srwmqc23qgp44dvsipr9z729rq-manual-database.drv
/gnu/store/d92npn7xlj4dkkl7mk1jirsn1bnf6rlb-ca-certificate-bundle.drv
/gnu/store/fmcbxm998xr40hnpdzs2wizq17zhwgml-info-dir.drv
/gnu/store/rdwrrznp57467vza8d2x079zrf4clxmk-fonts-dir.drv
building CA certificate bundle...
building fonts directory...
building directory of Info manuals...
building database for manual pages...
building /gnu/store/xb5inry74xm915f5pbynp3i1q3qjj6h5-profile.drv...
4 packages in profile
[root@guix-jackhill-dev-01 ~]# systemctl stop guix-daemon
(reverse-i-search)`sta': systemctl ^Catus -l guix-daemon
[root@guix-jackhill-dev-01 ~]# systemctl start guix-daemon
[root@guix-jackhill-dev-01 ~]# systemctl status -l guix-daemon
● guix-daemon.service - Build daemon for GNU Guix
Loaded: loaded (/etc/systemd/system/guix-daemon.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2019-06-05 16:56:06 EDT; 1s ago
Main PID: 38352 (guix-daemon)
Tasks: 1 (limit: 8192)
CGroup: /system.slice/guix-daemon.service
└─38352 guix-daemon --build-users-group=guixbuild
Jun 05 16:56:06 guix-jackhill-dev-01.lib.duke.edu systemd[1]: Started Build daemon for GNU Guix.
[root@guix-jackhill-dev-01 ~]# guix package -i units
[n.b. no local errors this time]
updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
The following package will be installed:
units 2.18 /gnu/store/iqkf11sld63f8f3rs57qlivlgisvrvjj-units-2.18
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
The following derivation will be built:
/gnu/store/ws08mnazgqsbqs0ib2m96vvj2h7cpb2d-profile.drv
52.2 MB will be downloaded:
/gnu/store/b7fqhszxl02g6pfm3vw6b3cjz472qrly-python-3.7.0
[unrelated lines elided]
/gnu/store/zzhq9wv0ikfh7s01a036xivn2b0z42aa-info-dir.drv
downloading from https://ci.guix.gnu.org/nar/gzip/saxpxrr2xw6p426lbvis65bxdrxp1rb7-python-asn1crypto-0.24.0...
python-asn1crypto-0.24.0 204KiB 3.1MiB/s 00:00 [##################] 100.0%
[more similar lines elided]
applying 1 graft for /gnu/store/vs5m35vyskvdg94xk4g42gd9jrc7hczz-python-cffi-1.11.5.drv...
downloading from https://ci.guix.gnu.org/nar/gzip/i1w25703mj54c66m422m3iqbl2bybr81-units-2.18...
units-2.18 250KiB 740KiB/s 00:00 [##################] 100.0%
[unrelated lines elided]
building /gnu/store/ws08mnazgqsbqs0ib2m96vvj2h7cpb2d-profile.drv...
5 packages in profile
next prev parent reply other threads:[~2019-06-06 4:33 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 18:39 bug#36076: Manual should clarify that glibc-utf8-locales is needed by default on foreign distros Jack Hill
2019-06-05 13:17 ` Ludovic Courtès
2019-06-06 4:46 ` Jack Hill
2019-06-06 7:57 ` Ludovic Courtès
2019-06-05 17:28 ` Giovanni Biscuolo
2019-06-06 4:32 ` Jack Hill [this message]
2019-06-06 9:03 ` Giovanni Biscuolo
2019-06-06 15:38 ` Ludovic Courtès
2019-06-06 16:56 ` Jack Hill
2019-06-07 21:12 ` Ludovic Courtès
2019-06-07 22:59 ` Jack Hill
2019-06-11 14:49 ` Giovanni Biscuolo
2019-06-12 14:40 ` Ludovic Courtès
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://guix.gnu.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.20.1906051702120.5164@marsh.hcoop.net \
--to=jackhill@jackhill.us \
--cc=36076@debbugs.gnu.org \
--cc=g@xelera.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).