From: Chris Marusich <cmmarusich@gmail.com>
To: 33106@debbugs.gnu.org
Subject: bug#33106: "make check-system TESTS=basic" fails on master
Date: Sat, 20 Oct 2018 12:09:42 -0700 [thread overview]
Message-ID: <87k1mcqvt5.fsf@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 7282 bytes --]
Hi Guix,
The system test "basic" fails on commit
7d1f21c69aa89e4c7c57ace26af80d168157b243 (master). To reproduce, check
out that commit and run:
make check-system TESTS="basic"
For the record, this is on an x86_64-linux GuixSD system using an ext4
root file system. Here's the error (I've sanitized the output, which
apparently contained some unprintable characters, and removed some lines
for brevity):
--8<---------------cut here---------------start------------->8---
qemu-system-x86_64: warning: hub 0 is not connected to host network
[?7l
[0mSeaBIOS (version rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org)
iPXE (http://ipxe.org) 00:03.0 C980 PCI2.10 PnP PMM+0FF91280+0FEF1280 C980
Press Ctrl-B to configure iPXE (PCI 00:03.0)...
Booting from ROM...
[?7l
[2J[ 0.000000] Linux version 4.18.15-gnu (nixbld@) (gcc version 7.3.0 (GCC)) #1 SMP 1
[ 0.000000] Command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/pcjn1bvz1khr8k04qablc62rzwgfbh2b-system --load=/gnu/store/pcjn1bvz1khr8k04qablc62rzwgfbh2b-system/boot panic=1
[... Lines omitted for brevity ...]
[ 0.000000] Kernel command line: console=ttyS0 --root=/dev/vda1 --system=/gnu/store/pcjn1bvz1khr8k04qablc62rzwgfbh2b-system --load=/gnu/store/pcjn1bvz1khr8k04qablc62rzwgfbh2b-system/boot panic=1
[... Lines omitted for brevity ...]
GC Warning: pthread_getattr_np or pthread_attr_getstack failed for main thread
GC Warning: Couldn't read /proc/stat
Welcome, this is GNU's early boot Guile.
Use '--repl' for an initrd REPL.
loading kernel modules...
[ 1.425572] usbcore: registered new interface driver usb-storage
[ 1.442635] usbcore: registered new interface driver uas
[ 1.464201] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.469015] usbcore: registered new interface driver usbhid
[ 1.470604] usbhid: USB HID core driver
[ 1.526453] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 1.564134] PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 1.594052] PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.623716] PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 1.653420] PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.701890] virtio_blk: probe of virtio4 failed with error -2
[ 1.718210] virtio_net: probe of virtio0 failed with error -2
[ 1.724827] virtio_console virtio3: Error -2 initializing vqs
[ 1.726493] virtio_console: probe of virtio3 failed with error -2
[ 1.732626] virtio_rng: probe of virtio1 failed with error -2
[ 1.747209] FS-Cache: Loaded
[ 1.753755] 9pnet: Installing 9P2000 support
[ 1.756817] 9p: Installing v9fs 9p2000 file system support
[ 1.758476] FS-Cache: Netfs '9p' registered for caching
[ 1.767544] 9pnet_virtio: probe of virtio2 failed with error -2
In gnu/build/linux-boot.scm:
516:13 2 (_)
367:8 1 (mount-root-file-system "/dev/vda1" "ext4" # _)
In unknown file:
[ 1.798957] random: fast init done
0 (mount "/dev/vda1" "/real-root" "ext4" 1 #<undefined>)
In procedure mount: No such file or directory
[ 1.808236] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 1.808236]
[ 1.810919] CPU: 0 PID: 1 Comm: init Not tainted 4.18.15-gnu #1
[ 1.812019] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[ 1.812019] Call Trace:
[ 1.812019] dump_stack+0x63/0x85
[ 1.812019] panic+0xe4/0x244
[ 1.812019] do_exit+0xb1a/0xb20
[ 1.812019] ? wake_up_state+0x10/0x20
[ 1.812019] do_group_exit+0x43/0xb0
[ 1.812019] __x64_sys_exit_group+0x18/0x20
[ 1.812019] do_syscall_64+0x5a/0x120
[ 1.812019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1.812019] RIP: 0033:0x5ecce6
[ 1.812019] Code: Bad RIP value.
[ 1.812019] RSP: 002b:00007ffdddceb3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 1.812019] RAX: ffffffffffffffda RBX: 0000000000812ff0 RCX: 00000000005ecce6
[ 1.812019] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
[ 1.812019] RBP: 0000000000000000 R08: 00000000000000e7 R09: ffffffffffffffb0
[ 1.812019] R10: 00007f85d01aef88 R11: 0000000000000246 R12: 0000000000a63818
[ 1.812019] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000003
[ 1.812019] Kernel Offset: 0x2a000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 1.812019] Rebooting in 1 seconds..
QEMU runs as PID 4
connected to QEMU's monitor
read QEMU monitor prompt
connected to guest REPL
%%%% Starting test basic (Writing full log to "basic.log")
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL uname
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL shepherd socket ready
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL shell and user commands
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL special files
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL accounts
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL shepherd services
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL homes
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL skeletons in home directories
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL permissions on /root
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL no extra home directories
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:1: FAIL login on tty1
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL utmpx entry
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL wtmp entry
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL host name resolution
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL locale
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL /run/current-system is a GC root
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL /var/guix/gcroots/profiles is a valid symlink
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL screendump
/gnu/store/b1f0pn2zp33b0q06cp39yk9p1qasxzqi-basic-builder:2: FAIL screen text
# of expected passes 1
# of unexpected failures 19
--8<---------------cut here---------------end--------------->8---
Some questions/observations:
1) Where is the "basic.log" file? I checked the Guix checkout and the
retained directory of the failed derivation (i.e., the directory
produced by guix build --keep-failed /gnu/store/...gjmid5-basic.drv),
but I don't see it anywhere.
2) The test seems to have failed becuase of the following issue, which
is mentioned in the output above:
--8<---------------cut here---------------start------------->8---
0 (mount "/dev/vda1" "/real-root" "ext4" 1 #<undefined>)
In procedure mount: No such file or directory
--8<---------------cut here---------------end--------------->8---
The next steps are probably to look into whether /dev/vda1 or /real-root
exist when that call is made, and if one of them is missing, investigate
why it doesn't exist.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
next reply other threads:[~2018-10-20 19:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-20 19:09 Chris Marusich [this message]
2018-10-22 13:11 ` bug#33106: "make check-system TESTS=basic" fails on master Ludovic Courtès
2018-10-23 8:58 ` Chris Marusich
2018-10-24 1:49 ` Chris Marusich
2018-10-24 12:14 ` Ludovic Courtès
2018-10-26 5:11 ` Chris Marusich
2018-10-26 9:44 ` Ludovic Courtès
2018-10-26 16:14 ` Chris Marusich
2018-10-27 14:37 ` Ludovic Courtès
2020-11-30 21:36 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix
2020-12-19 9:08 ` zimoun
2020-12-22 14:13 ` zimoun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://guix.gnu.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k1mcqvt5.fsf@gmail.com \
--to=cmmarusich@gmail.com \
--cc=33106@debbugs.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).