* bug#33152: Indeterministic test failure in qemu-minimal [not found] <CANiMCTP18e6Azx=KkaZ1mn_PiV=gva06Am0tLPULVF0g8C4r=g@mail.gmail.com> @ 2018-10-25 15:57 ` Gábor Boskovits 2018-10-26 17:58 ` Ludovic Courtès 0 siblings, 1 reply; 5+ messages in thread From: Gábor Boskovits @ 2018-10-25 15:57 UTC (permalink / raw) To: 33152 ---------- Forwarded message --------- From: Edouard KLEIN <edouardklein@gmail.com> Date: 2018. okt. 25., Cs, 15:34 Subject: Using 'guix system disk-image' on a non-GuixSD OS To: <help-guix@gnu.org> Hi all, I do not know whether the "guix system disk-image" command is supposed to work on a non GuixSD system. If it is, then I'm running into an error while trying to create a disk from a system declaration on my Arch Linux OS. I run: $ guix system disk-image --fallback config.scm with config.scm copied at the end of this email. I get the error message at the end of this emai. I do not really know where to start looking. It appears that the error is in the qemu package, which is necessary for grub. I tried removing the bootloader part of the system declaration, as I can boot from the ext4 partition directly, but it seems necessary to have one such part in the OS declaration. Any help would be appreciated. In the meantime I'm running the command in a GuixSD VM, but it's taking forever and it's way more cumbersome than being able to run it on any system. Thanks in advance, Edouard. ---------------config.scm ;; This is an operating system configuration template ;; for a "bare bones" setup, with no X11 display server. (use-modules (gnu)) (use-service-modules networking ssh) (use-package-modules screen ssh) (operating-system (host-name "GuixSD_Base") (timezone "UTC") (locale "en_US.utf8") ;; Boot in "legacy" BIOS mode, assuming /dev/sdX is the ;; target hard disk, and "my-root" is the label of the target ;; root file system. (bootloader (bootloader-configuration (bootloader grub-bootloader) (target "/dev/sda"))) (file-systems (cons (file-system (device (file-system-label "my-root")) (mount-point "/") (type "ext4")) %base-file-systems)) ;; This is where user accounts are specified. The "root" ;; account is implicit, and is initially created with the ;; empty password. (users (cons (user-account (name "edouard") (comment "boudoir") (group "users") ;; Adding the account to the "wheel" group ;; makes it a sudoer. Adding it to "audio" ;; and "video" allows the user to play sound ;; and access the webcam. (supplementary-groups '("wheel" "audio" "video")) (home-directory "/home/edouard")) %base-user-accounts)) ;; Globally-installed packages. (packages (append (map specification->package '("tmux" "openssh")) %base-packages)) ;; Add services to the baseline: a DHCP client and ;; an SSH server. (services (cons* (dhcp-client-service) (service openssh-service-type (openssh-configuration (authorized-keys '(("edouard" ,(local-file "edouard.pub")) ("root" ,(local-file "edouard.pub")))) (permit-root-login 'without-password) (port-number 22))) %base-services))) ------------error message c++ -I/gnu/store/pslvw8b4r0m5vmbz2ml7whcv2wbdpa57-pixman-0.34.0/include/pixman-1 -I/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/dtc/libfdt -pthread -I/gnu/s[14/1947] cagl47zbb6krfpmwm31m70s9pk00-glib-2.56.0/include/glib-2.0 -I/gnu/store/x9lfcagl47zbb6krfpmwm31m70s9pk00-glib-2.56.0/lib/glib-2.0/include -DNCURSES_WIDECHAR -D_GNU_SOURCE -D_D EFAULT_SOURCE -fPIE -DPIE -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-p rototypes -fno-strict-aliasing -fno-common -fwrapv -Wendif-labels -Wno-missing-include-dirs -Wempty-body -Wnested-externs -Wformat-security -Wformat-y2k -Winit-self -Wignore d-qualifiers -Wold-style-declaration -Wold-style-definition -Wtype-limits -fstack-protector-strong -I/gnu/store/8679cp88yg5jrq2q1944xf14ibyp1kp7-libpng-1.6.34/include/libpn g16 -I/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests -O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -pie -m64 -Wl,--warn-co mmon -Wl,-z,relro -Wl,-z,now -pie -m64 -lrt -o tests/test-replication tests/test-replication.o block.o blockjob.o qemu-io-cmds.o replication.o block/raw-format.o block/qcow.o block/vdi.o block/vmdk.o block/cloop.o block/bochs.o block/vpc.o block/vvfat.o block/dmg.o block/qcow2.o block/qcow2-refcount.o block/qcow2-cluster.o block/qcow2-snapshot.o block/qcow2-cache.o block/qcow2-bitmap.o block/qed.o block/qed-l2-cache.o block/qed-table.o block/qed-cluster.o block/qed-check.o block/vhdx.o block/vhdx-endian.o block/vhdx- log.o block/quorum.o block/parallels.o block/blkdebug.o block/blkverify.o block/blkreplay.o block/block-backend.o block/snapshot.o block/qapi.o block/file-posix.o block/linux -aio.o block/null.o block/mirror.o block/commit.o block/io.o block/throttle-groups.o block/nbd.o block/nbd-client.o block/sheepdog.o block/accounting.o block/dirty-bitmap.o b lock/write-threshold.o block/backup.o block/replication.o block/crypto.o nbd/server.o nbd/client.o nbd/common.o block/dmg-bz2.o io/channel.o io/channel-buffer.o io/channel-co mmand.o io/channel-file.o io/channel-socket.o io/channel-tls.o io/channel-watch.o io/channel-websock.o io/channel-util.o io/dns-resolver.o io/task.o crypto/init.o crypto/hash .o crypto/hash-glib.o crypto/hmac.o crypto/hmac-glib.o crypto/aes.o crypto/desrfb.o crypto/cipher.o crypto/tlscreds.o crypto/tlscredsanon.o crypto/tlscredsx509.o crypto/tlsse ssion.o crypto/secret.o crypto/random-platform.o crypto/pbkdf.o crypto/ivgen.o crypto/ivgen-essiv.o crypto/ivgen-plain.o crypto/ivgen-plain64.o crypto/afsplit.o crypto/xts.o crypto/block.o crypto/block-qcow.o crypto/block-luks.o qom/object.o qom/container.o qom/qom-qobject.o qom/object_interfaces.o tests/iothread.o libqemuutil.a libqemustub.a - lz -laio -lbz2 -lm -L/gnu/store/x9lfcagl47zbb6krfpmwm31m70s9pk00-glib-2.56.0/lib -lgthread-2.0 -pthread -lglib-2.0 -lz -lz -lutil MALLOC_PERTURB_=${MALLOC_PERTURB_:-$(( ${RANDOM:-0} % 255 + 1))} gtester -k --verbose -m=quick tests/test-replication TEST: tests/test-replication... (pid=14861) /replication/primary/read: OK /replication/primary/write: OK /replication/primary/start: OK /replication/primary/stop: OK /replication/primary/do_checkpoint: OK /replication/primary/get_error_all: OK /replication/secondary/read: OK /replication/secondary/write: OK /replication/secondary/start: ** ERROR:tests/test-replication.c:117:test_blk_write: assertion failed: (async_ret == 0) FAIL GTester: last random seed: R02Sb499c9e89b18bb967dd59acad1b2aaa8 (pid=14865) /replication/secondary/stop: OK /replication/secondary/do_checkpoint: OK /replication/secondary/get_error_all: OK FAIL: tests/test-replication make: *** [/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests/Makefile.include:849: check-tests/test-replication] Error 1 Test suite failed, dumping logs. Backtrace: 4 (primitive-load "/gnu/store/5v4cdxg9m4x6hax86g1q7jw5bch…") In ice-9/eval.scm: 191:35 3 (_ _) In srfi/srfi-1.scm: 640:9 2 (for-each #<procedure a06400 at /gnu/store/f95ghy8mx00…> …) In /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm: 799:31 1 (_ _) 369:6 0 (check #:target _ #:make-flags _ #:tests? _ # _ # _ # _) /gnu/store/f95ghy8mx00fc22nrvswvnpqlfdkf2nk-module-import/guix/build/gnu-build-system.scm:369:6: In procedure check: Throw to key `srfi-34' with args `(#<condition &invoke-error [program: "make" arguments: ("check") exit-status: 2 term-signal: #f stop-signal: #f] 986a40>)'. builder for `/gnu/store/5q7ixx1qjf7msamr052jc5jyfilhpsai-qemu-minimal-2.10.2.drv' failed with exit code 1 cannot build derivation `/gnu/store/5i56cl8c6608azkn67qy54nf2kqxfhkl-grub-2.02.drv': 1 dependencies couldn't be built guix system: error: build failed: build of `/gnu/store/5i56cl8c6608azkn67qy54nf2kqxfhkl-grub-2.02.drv' failed It worked without errors the second time. g_bor ^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#33152: Indeterministic test failure in qemu-minimal 2018-10-25 15:57 ` bug#33152: Indeterministic test failure in qemu-minimal Gábor Boskovits @ 2018-10-26 17:58 ` Ludovic Courtès 2018-10-26 18:24 ` Gábor Boskovits 0 siblings, 1 reply; 5+ messages in thread From: Ludovic Courtès @ 2018-10-26 17:58 UTC (permalink / raw) To: Gábor Boskovits; +Cc: 33152 Hello Gábor, (Should we be Cc’ing this to Edouard?) Gábor Boskovits <boskovits@gmail.com> skribis: > ERROR:tests/test-replication.c:117:test_blk_write: assertion failed: > (async_ret == 0) > FAIL > GTester: last random seed: R02Sb499c9e89b18bb967dd59acad1b2aaa8 > (pid=14865) > /replication/secondary/stop: OK > /replication/secondary/do_checkpoint: OK > /replication/secondary/get_error_all: OK > FAIL: tests/test-replication > make: *** [/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests/Makefile.include:849: […] > builder for `/gnu/store/5q7ixx1qjf7msamr052jc5jyfilhpsai-qemu-minimal-2.10.2.drv' failed with exit code 1 cannot build derivation Which Guix version is it, as reported by ‘guix describe’ or ‘guix --version’? (We’ve been providing QEMU 3.0 since August 2018, commit 5dc8437fc0ff3dedf75de2183e3bf9d493e4aa81, so this must be close to 0.15.0.) This may be a non-deterministic build failure, which shows up because hydra.gnu.org is currently off-line and so substitutes are unavailable. Thanks, Ludo’. ^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#33152: Indeterministic test failure in qemu-minimal 2018-10-26 17:58 ` Ludovic Courtès @ 2018-10-26 18:24 ` Gábor Boskovits 2018-10-30 16:26 ` Edouard KLEIN 0 siblings, 1 reply; 5+ messages in thread From: Gábor Boskovits @ 2018-10-26 18:24 UTC (permalink / raw) To: Ludovic Courtès, Edouard KLEIN; +Cc: 33152 Hello Ludo, Ludovic Courtès <ludo@gnu.org> ezt írta (időpont: 2018. okt. 26., P, 19:58): > > Hello Gábor, > > (Should we be Cc’ing this to Edouard?) > Yes, and done. > Gábor Boskovits <boskovits@gmail.com> skribis: > > > ERROR:tests/test-replication.c:117:test_blk_write: assertion failed: > > (async_ret == 0) > > FAIL > > GTester: last random seed: R02Sb499c9e89b18bb967dd59acad1b2aaa8 > > (pid=14865) > > /replication/secondary/stop: OK > > /replication/secondary/do_checkpoint: OK > > /replication/secondary/get_error_all: OK > > FAIL: tests/test-replication > > make: *** [/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests/Makefile.include:849: > > […] > > > builder for `/gnu/store/5q7ixx1qjf7msamr052jc5jyfilhpsai-qemu-minimal-2.10.2.drv' failed with exit code 1 cannot build derivation > > Which Guix version is it, as reported by ‘guix describe’ or ‘guix > --version’? (We’ve been providing QEMU 3.0 since August 2018, commit > 5dc8437fc0ff3dedf75de2183e3bf9d493e4aa81, so this must be close to > 0.15.0.) > Edouard, could you please provide the requested details. > This may be a non-deterministic build failure, which shows up because > hydra.gnu.org is currently off-line and so substitutes are unavailable. > I have a feeling, that this could well happen on the build farm, as it seems that there is indeterministic behaviour in the testsuite. Having the substitutes availble would only hide the bug. WDYT? > Thanks, > Ludo’. Best regards, g_bor ^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#33152: Indeterministic test failure in qemu-minimal 2018-10-26 18:24 ` Gábor Boskovits @ 2018-10-30 16:26 ` Edouard KLEIN 2021-03-15 21:59 ` Maxim Cournoyer 0 siblings, 1 reply; 5+ messages in thread From: Edouard KLEIN @ 2018-10-30 16:26 UTC (permalink / raw) To: Gábor Boskovits; +Cc: 33152 [-- Attachment #1: Type: text/plain, Size: 2227 bytes --] Hi, Sorry for the delay: $guix --version guix (GNU Guix) 0.15.0 Copyright (C) 2018 the Guix authors License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html > This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Please let me know if I can be of assistance. I've tried running the command a few more times but it succeeds now. I'll let you know if it fails again. On Fri, 26 Oct 2018 at 20:24 Gábor Boskovits <boskovits@gmail.com> wrote: > Hello Ludo, > > Ludovic Courtès <ludo@gnu.org> ezt írta (időpont: 2018. okt. 26., P, > 19:58): > > > > Hello Gábor, > > > > (Should we be Cc’ing this to Edouard?) > > > > Yes, and done. > > > Gábor Boskovits <boskovits@gmail.com> skribis: > > > > > ERROR:tests/test-replication.c:117:test_blk_write: assertion failed: > > > (async_ret == 0) > > > FAIL > > > GTester: last random seed: R02Sb499c9e89b18bb967dd59acad1b2aaa8 > > > (pid=14865) > > > /replication/secondary/stop: > OK > > > /replication/secondary/do_checkpoint: > OK > > > /replication/secondary/get_error_all: > OK > > > FAIL: tests/test-replication > > > make: *** > [/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests/Makefile.include:849: > > > > […] > > > > > builder for > `/gnu/store/5q7ixx1qjf7msamr052jc5jyfilhpsai-qemu-minimal-2.10.2.drv' > failed with exit code 1 cannot build derivation > > > > Which Guix version is it, as reported by ‘guix describe’ or ‘guix > > --version’? (We’ve been providing QEMU 3.0 since August 2018, commit > > 5dc8437fc0ff3dedf75de2183e3bf9d493e4aa81, so this must be close to > > 0.15.0.) > > > > Edouard, could you please provide the requested details. > > > This may be a non-deterministic build failure, which shows up because > > hydra.gnu.org is currently off-line and so substitutes are unavailable. > > > > I have a feeling, that this could well happen on the build farm, as it > seems > that there is indeterministic behaviour in the testsuite. Having the > substitutes > availble would only hide the bug. WDYT? > > > Thanks, > > Ludo’. > > Best regards, > g_bor > [-- Attachment #2: Type: text/html, Size: 3213 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#33152: Indeterministic test failure in qemu-minimal 2018-10-30 16:26 ` Edouard KLEIN @ 2021-03-15 21:59 ` Maxim Cournoyer 0 siblings, 0 replies; 5+ messages in thread From: Maxim Cournoyer @ 2021-03-15 21:59 UTC (permalink / raw) To: Edouard KLEIN; +Cc: 33152-done Hi everyone, Edouard KLEIN <edouardklein@gmail.com> writes: > Hi, > > Sorry for the delay: > > $guix --version > guix (GNU Guix) 0.15.0 > Copyright (C) 2018 the Guix authors > License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html >> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. > > > Please let me know if I can be of assistance. I've tried running the > command a few more times but it succeeds now. I'll let you know if it fails > again. > > On Fri, 26 Oct 2018 at 20:24 Gábor Boskovits <boskovits@gmail.com> wrote: > >> Hello Ludo, >> >> Ludovic Courtès <ludo@gnu.org> ezt írta (időpont: 2018. okt. 26., P, >> 19:58): >> > >> > Hello Gábor, >> > >> > (Should we be Cc’ing this to Edouard?) >> > >> >> Yes, and done. >> >> > Gábor Boskovits <boskovits@gmail.com> skribis: >> > >> > > ERROR:tests/test-replication.c:117:test_blk_write: assertion failed: >> > > (async_ret == 0) >> > > FAIL >> > > GTester: last random seed: R02Sb499c9e89b18bb967dd59acad1b2aaa8 >> > > (pid=14865) >> > > /replication/secondary/stop: >> OK >> > > /replication/secondary/do_checkpoint: >> OK >> > > /replication/secondary/get_error_all: >> OK >> > > FAIL: tests/test-replication >> > > make: *** >> [/tmp/guix-build-qemu-minimal-2.10.2.drv-0/qemu-2.10.2/tests/Makefile.include:849: >> > >> > […] >> > >> > > builder for >> `/gnu/store/5q7ixx1qjf7msamr052jc5jyfilhpsai-qemu-minimal-2.10.2.drv' >> failed with exit code 1 cannot build derivation >> > >> > Which Guix version is it, as reported by ‘guix describe’ or ‘guix >> > --version’? (We’ve been providing QEMU 3.0 since August 2018, commit >> > 5dc8437fc0ff3dedf75de2183e3bf9d493e4aa81, so this must be close to >> > 0.15.0.) >> > >> >> Edouard, could you please provide the requested details. >> >> > This may be a non-deterministic build failure, which shows up because >> > hydra.gnu.org is currently off-line and so substitutes are unavailable. >> > >> >> I have a feeling, that this could well happen on the build farm, as it >> seems >> that there is indeterministic behaviour in the testsuite. Having the >> substitutes >> availble would only hide the bug. WDYT? >> >> > Thanks, >> > Ludo’. >> >> Best regards, >> g_bor >> This bug is very old. We're now at Guix 1.2.0 and QEMU 5.2.0. If there are still problems with building QEMU on your system, please create a fresh bug report. Closing. Thank you! Maxim ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-03-15 22:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CANiMCTP18e6Azx=KkaZ1mn_PiV=gva06Am0tLPULVF0g8C4r=g@mail.gmail.com>
2018-10-25 15:57 ` bug#33152: Indeterministic test failure in qemu-minimal Gábor Boskovits
2018-10-26 17:58 ` Ludovic Courtès
2018-10-26 18:24 ` Gábor Boskovits
2018-10-30 16:26 ` Edouard KLEIN
2021-03-15 21:59 ` Maxim Cournoyer
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/guix.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).