* bug#50568: Missing source code
@ 2021-09-13 13:16 Ludovic Courtès
2021-09-13 13:49 ` Maxime Devos
` (2 more replies)
0 siblings, 3 replies; 25+ messages in thread
From: Ludovic Courtès @ 2021-09-13 13:16 UTC (permalink / raw)
To: 50568
Hello,
As of current ‘master’ (ca. ec0e05ff306c950142c9ead7c712c749617069e7),
the following source code is missing (these are fixed-output
derivations):
/gnu/store/3814l5f74b30yy0j84a4wrv8nl16fx26-eye-1.4.1.tar.gz.drv
/gnu/store/fjk0q2ajk3y18yh5ngif8ir14xckxqa5-weightwatcher-1.12.tar.gz.drv
/gnu/store/syndcxqrzqph12k22y5x6i454jajjw00-skymaker-3.10.5.tar.gz.drv
/gnu/store/ginlb786zg4kqnzvxxfh8qx7wqajhl10-stuff-1.26.0.tar.gz.drv
/gnu/store/hkgpygplymyyaifk6pmvs2cvmkmfhpkq-clusterProfiler_4.0.4.tar.gz.drv
/gnu/store/ghg86w6i14jkrq8nvcazr7pvxz8i82s2-ggtree_3.0.3.tar.gz.drv
/gnu/store/prbkg6vldsh1688fsigr33g4s8qla7rl-propeller-gcc-b4f45a4725e0b6d0af59e594c4e3e35ca4105867-checkout.drv
These two fail to build with a hash mismatch error:
/gnu/store/v1h0djr2daz1ymmsb7043r79llcdamxa-canada1500.zip.drv
/gnu/store/gj7g1hxjja58shki02hcdpbahrxwbcjr-texlive-marginnote-51265-checkout.drv
If you know how to retrieve them, please share!
Ludo’.
^ permalink raw reply [flat|nested] 25+ messages in thread* bug#50568: Missing source code 2021-09-13 13:16 bug#50568: Missing source code Ludovic Courtès @ 2021-09-13 13:49 ` Maxime Devos 2021-09-14 8:38 ` Ludovic Courtès 2021-09-13 13:49 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-10-04 20:05 ` Ludovic Courtès 2 siblings, 1 reply; 25+ messages in thread From: Maxime Devos @ 2021-09-13 13:49 UTC (permalink / raw) To: Ludovic Courtès, 50568 [-- Attachment #1: Type: text/plain, Size: 1094 bytes --] Ludovic Courtès schreef op ma 13-09-2021 om 15:16 [+0200]: > Hello, > > As of current ‘master’ (ca. ec0e05ff306c950142c9ead7c712c749617069e7), > the following source code is missing (these are fixed-output > derivations): The Wayback Machine has some copies of software at https://www.atromatic.net: > /gnu/store/3814l5f74b30yy0j84a4wrv8nl16fx26-eye-1.4.1.tar.gz.drv https://web.archive.org/web/20161204131910/https://www.astromatic.net/download/eye/eye-1.4.1.tar.gz > /gnu/store/fjk0q2ajk3y18yh5ngif8ir14xckxqa5-weightwatcher-1.12.tar.gz.drv https://web.archive.org/web/20161204140548/https://www.astromatic.net/download/weightwatcher/weightwatcher-1.12.tar.gz > /gnu/store/syndcxqrzqph12k22y5x6i454jajjw00-skymaker-3.10.5.tar.gz.drv https://web.archive.org/web/20161206053718/https://www.astromatic.net/download/skymaker/skymaker-3.10.5.tar.gz > /gnu/store/ginlb786zg4kqnzvxxfh8qx7wqajhl10-stuff-1.26.0.tar.gz.drv https://web.archive.org/web/20161204140455/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz Greetings, Maxime. [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 260 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-13 13:49 ` Maxime Devos @ 2021-09-14 8:38 ` Ludovic Courtès 2021-09-14 8:54 ` zimoun 2021-09-14 9:36 ` pelzflorian (Florian Pelz) 0 siblings, 2 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-09-14 8:38 UTC (permalink / raw) To: Maxime Devos; +Cc: 50568 Hi, Maxime Devos <maximedevos@telenet.be> skribis: > The Wayback Machine has some copies of software at https://www.atromatic.net: Thanks, they’re now all in store on berlin. It’s kinda ironic that it’s the Wayback Machine that’s saving us here… I wonder if there’s a way to construct generic web.archive.org URLs that we could use as a fallback in (guix build download)? Thanks, Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-14 8:38 ` Ludovic Courtès @ 2021-09-14 8:54 ` zimoun 2021-09-16 19:28 ` Ludovic Courtès 2021-09-14 9:36 ` pelzflorian (Florian Pelz) 1 sibling, 1 reply; 25+ messages in thread From: zimoun @ 2021-09-14 8:54 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 Hi, On Tue, 14 Sept 2021 at 10:40, Ludovic Courtès <ludo@gnu.org> wrote: > Thanks, they’re now all in store on berlin. Do we do the usual trick to save them on SWH? > It’s kinda ironic that it’s the Wayback Machine that’s saving us here… > I wonder if there’s a way to construct generic web.archive.org URLs that > we could use as a fallback in (guix build download)? That would help, I guess. :-) Cheers, simon ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-14 8:54 ` zimoun @ 2021-09-16 19:28 ` Ludovic Courtès 2021-09-17 10:10 ` zimoun 0 siblings, 1 reply; 25+ messages in thread From: Ludovic Courtès @ 2021-09-16 19:28 UTC (permalink / raw) To: zimoun; +Cc: 50568 Hi, zimoun <zimon.toutoune@gmail.com> skribis: > On Tue, 14 Sept 2021 at 10:40, Ludovic Courtès <ludo@gnu.org> wrote: > >> Thanks, they’re now all in store on berlin. > > Do we do the usual trick to save them on SWH? I think their contents are already saved on berlin, just not the tarballs themselves. For example: --8<---------------cut here---------------start------------->8--- $ guix download https://web.archive.org/web/20161204140455/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz Starting download of /tmp/guix-file.HTtGKM From https://web.archive.org/web/20161204140455/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz... …6.0.tar.gz 163KiB/s 00:25 | 3.9MiB transferred /gnu/store/l3r5j8r4f6fh6bxa9va3681n3bclxpdq-stuff-1.26.0.tar.gz 1syibi3b86z9pikhicvkkmgxm916j732fdiw0agw0lq6z13fdcjm $ guix environment --ad-hoc disarchive -- disarchive disassemble /gnu/store/l3r5j8r4f6fh6bxa9va3681n3bclxpdq-stuff-1.26.0.tar.gz |grep swhid (swhid "swh:1:dir:128bbe76a82dd0b38b725565ed703a7148257ae0")) --8<---------------cut here---------------end--------------->8--- and: --8<---------------cut here---------------start------------->8--- scheme@(guile-user)> ,use(guix swh) scheme@(guile-user)> (lookup-directory "128bbe76a82dd0b38b725565ed703a7148257ae0") $24 = #f --8<---------------cut here---------------end--------------->8--- Hmm actually maybe they vanished before they got a chance to be archived? Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-16 19:28 ` Ludovic Courtès @ 2021-09-17 10:10 ` zimoun 0 siblings, 0 replies; 25+ messages in thread From: zimoun @ 2021-09-17 10:10 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 Hi, On Thu, 16 Sept 2021 at 21:28, Ludovic Courtès <ludo@gnu.org> wrote: > zimoun <zimon.toutoune@gmail.com> skribis: > > On Tue, 14 Sept 2021 at 10:40, Ludovic Courtès <ludo@gnu.org> wrote: > > > >> Thanks, they’re now all in store on berlin. > > > > Do we do the usual trick to save them on SWH? > > I think their contents are already saved on berlin, just not the > tarballs themselves. I mean, download the tarball from Berlin, then turn locally the source to a Git source, archive it on SWH. As it had been done for guile-dbi for instance. > Hmm actually maybe they vanished before they got a chance to be > archived? Probably. One thing that I have on my TODO is to write a sources.json with all the source Berlin has. Or as a start add the URL of Berlin as "mirror". Cheers, simon ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-14 8:38 ` Ludovic Courtès 2021-09-14 8:54 ` zimoun @ 2021-09-14 9:36 ` pelzflorian (Florian Pelz) 2021-09-16 19:45 ` Ludovic Courtès 1 sibling, 1 reply; 25+ messages in thread From: pelzflorian (Florian Pelz) @ 2021-09-14 9:36 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 On Tue, Sep 14, 2021 at 10:38:55AM +0200, Ludovic Courtès wrote: > Hi, > > Maxime Devos <maximedevos@telenet.be> skribis: > > > The Wayback Machine has some copies of software at https://www.atromatic.net: > > Thanks, they’re now all in store on berlin. > > It’s kinda ironic that it’s the Wayback Machine that’s saving us here… > I wonder if there’s a way to construct generic web.archive.org URLs that > we could use as a fallback in (guix build download)? AFAIK Just replace the date in On Mon, Sep 13, 2021 at 03:49:05PM +0200, Maxime Devos wrote: > https://web.archive.org/web/20161204140455/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz by the current time. Regards, Florian ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-14 9:36 ` pelzflorian (Florian Pelz) @ 2021-09-16 19:45 ` Ludovic Courtès 2021-09-17 10:46 ` pelzflorian (Florian Pelz) 0 siblings, 1 reply; 25+ messages in thread From: Ludovic Courtès @ 2021-09-16 19:45 UTC (permalink / raw) To: pelzflorian (Florian Pelz); +Cc: 50568 [-- Attachment #1: Type: text/plain, Size: 1727 bytes --] Hi Florian, "pelzflorian (Florian Pelz)" <pelzflorian@pelzflorian.de> skribis: > On Tue, Sep 14, 2021 at 10:38:55AM +0200, Ludovic Courtès wrote: >> Hi, >> >> Maxime Devos <maximedevos@telenet.be> skribis: >> >> > The Wayback Machine has some copies of software at https://www.atromatic.net: >> >> Thanks, they’re now all in store on berlin. >> >> It’s kinda ironic that it’s the Wayback Machine that’s saving us here… >> I wonder if there’s a way to construct generic web.archive.org URLs that >> we could use as a fallback in (guix build download)? > > AFAIK Just replace the date in > > On Mon, Sep 13, 2021 at 03:49:05PM +0200, Maxime Devos wrote: >> https://web.archive.org/web/20161204140455/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz > > by the current time. Oh nice, that seems to work: --8<---------------cut here---------------start------------->8--- $ guix download https://web.archive.org/web/20210911171400/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz Starting download of /tmp/guix-file.QXTq4V From https://web.archive.org/web/20210911171400/https://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz... following redirection to `https://web.archive.org/web/20161204140455/http://www.astromatic.net/download/stuff/stuff-1.26.0.tar.gz'... …6.0.tar.gz 200KiB/s 00:20 | 3.9MiB transferred /gnu/store/l3r5j8r4f6fh6bxa9va3681n3bclxpdq-stuff-1.26.0.tar.gz 1syibi3b86z9pikhicvkkmgxm916j732fdiw0agw0lq6z13fdcjm --8<---------------cut here---------------end--------------->8--- How ’bout the attached patch? Works for me. Thanks, Ludo’. [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: Type: text/x-patch, Size: 1444 bytes --] diff --git a/guix/build/download.scm b/guix/build/download.scm index c8ddadfdd4..140e42afec 100644 --- a/guix/build/download.scm +++ b/guix/build/download.scm @@ -678,6 +678,18 @@ and write the output to FILE." (false-if-exception* (disarchive-assemble spec file #:resolver resolve)))))))) +(define (internet-archive-uri uri) + "Return a URI corresponding to an Internet Archive backup of URI, or #f if +URI does not denote a Web URI." + (and (memq (uri-scheme uri) '(http https)) + (let* ((now (time-utc->date (current-time time-utc))) + (date (date->string now "~Y~m~d~H~M~S"))) + ;; Note: the date in the URL can be anything and web.archive.org + ;; automatically redirects to the closest date. + (build-uri 'https #:host "web.archive.org" + #:path (string-append "/web/" date "/" + (uri->string uri)))))) + (define* (url-fetch url file #:key (timeout 10) (verify-certificate? #t) @@ -769,7 +781,9 @@ otherwise simply ignore them." (setvbuf (current-error-port) 'line) - (let try ((uri (append uri content-addressed-uris))) + (let try ((uri (append uri content-addressed-uris + (or (and=> (internet-archive-uri (first uri)) list) + '())))) (match uri ((uri tail ...) (or (fetch uri file) ^ permalink raw reply related [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-16 19:45 ` Ludovic Courtès @ 2021-09-17 10:46 ` pelzflorian (Florian Pelz) 2021-09-20 7:25 ` Ludovic Courtès 0 siblings, 1 reply; 25+ messages in thread From: pelzflorian (Florian Pelz) @ 2021-09-17 10:46 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 On Tue, Sep 14, 2021 at 10:38:55AM +0200, Ludovic Courtès wrote: > I wonder if there’s a way to construct generic web.archive.org URLs that > we could use as a fallback in (guix build download)? On Thu, Sep 16, 2021 at 09:45:26PM +0200, Ludovic Courtès wrote: > How ’bout the attached patch? Works for me. Thank you for implementing. I guix pull with the patch applied, add the IP from guix environment --ad-hoc bind:utils -- dig web.archive.org to /etc/hosts, set my DNS server to a non-existing 10.0.0.50, disable IPv6, then “sudo herd stop nscd”, re-connect Network Manager (ping gnu.org fails now) and LC_ALL=en_US.utf8 guix install hello. It fails. Did I misunderstand the patch’s purpose or test in a wrong way? This is the output: florian@florianacer ~$ LC_ALL=en_US.utf8 guix install hello The following package will be installed: hello 2.10 substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0%guix substitute: warning: ci.guix.gnu.org: host not found: Temporary failure in name resolution substitute: substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'... 0.0%guix substitute: warning: bordeaux.guix.gnu.org: host not found: Temporary failure in name resolution substitute: The following derivations will be built: /gnu/store/4hsqwl19n4m2scipkzy0rsc04n30vhbk-profile.drv /gnu/store/xr30pd6zw8lp0xz3kq2d7gm3c8pmh674-hello-2.10.drv /gnu/store/wy24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0% substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'... 0.0% substitute: updating substitutes from 'https://ci.guix.gnu.org'... 0.0% substitute: updating substitutes from 'https://bordeaux.guix.gnu.org'... 0.0% applying 5 grafts for /gnu/store/rsizfxkag8gkbccr5d4g9xdacgwh8wya-at-spi2-core-2.34.0.drv ... building /gnu/store/wy24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv... \builder for `/gnu/store/wy24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv' failed to produce output path `/gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz' build of /gnu/store/wy24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv failed View build log at '/var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2'. applying 4 grafts for /gnu/store/8jj80f4p5bp9s09zawxmli13chrdx2ri-at-spi2-atk-2.34.1.drv ... cannot build derivation `/gnu/store/xr30pd6zw8lp0xz3kq2d7gm3c8pmh674-hello-2.10.drv': 1 dependencies couldn't be built cannot build derivation `/gnu/store/4hsqwl19n4m2scipkzy0rsc04n30vhbk-profile.drv': 1 dependencies couldn't be built guix install: error: build of `/gnu/store/4hsqwl19n4m2scipkzy0rsc04n30vhbk-profile.drv' failed florian@florianacer ~$ bzcat /var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2 Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From https://ftpmirror.gnu.org/gnu/hello/hello-2.10.tar.gz... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From ftp://ftp.cs.tu-berlin.de/pub/gnu/hello/hello-2.10.tar.gz... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From ftp://ftp.funet.fi/pub/mirrors/ftp.gnu.org/gnu/hello/hello-2.10.tar.gz... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From http://ftp.gnu.org/pub/gnu/hello/hello-2.10.tar.gz... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From https://ci.guix.gnu.org/file/hello-2.10.tar.gz/sha256/0ssi1wpaf7plaswqqjwigppsg5fyh99vdlb9kzl7c9lng89ndq1i... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From https://tarballs.nixos.org/sha256/0ssi1wpaf7plaswqqjwigppsg5fyh99vdlb9kzl7c9lng89ndq1i... In procedure getaddrinfo: Temporary failure in name resolution Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz From https://archive.softwareheritage.org/api/1/content/sha256:31e066137a962676e89f69d1b65382de95a7ef7d914b8cb956f41ea72e0f516b/raw/... In procedure getaddrinfo: Temporary failure in name resolution Trying to use Disarchive to assemble /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz... In procedure getaddrinfo: Temporary failure in name resolution could not find its Disarchive specification failed to download "/gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz" from "mirror://gnu/hello/hello-2.10.tar.gz" ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-17 10:46 ` pelzflorian (Florian Pelz) @ 2021-09-20 7:25 ` Ludovic Courtès 2021-09-21 10:28 ` pelzflorian (Florian Pelz) 0 siblings, 1 reply; 25+ messages in thread From: Ludovic Courtès @ 2021-09-20 7:25 UTC (permalink / raw) To: pelzflorian (Florian Pelz); +Cc: 50568 Hi Florian, "pelzflorian (Florian Pelz)" <pelzflorian@pelzflorian.de> skribis: > On Tue, Sep 14, 2021 at 10:38:55AM +0200, Ludovic Courtès wrote: >> I wonder if there’s a way to construct generic web.archive.org URLs that >> we could use as a fallback in (guix build download)? > On Thu, Sep 16, 2021 at 09:45:26PM +0200, Ludovic Courtès wrote: >> How ’bout the attached patch? Works for me. > > Thank you for implementing. I guix pull with the patch applied, add the IP > from > > guix environment --ad-hoc bind:utils -- dig web.archive.org > > to /etc/hosts, set my DNS server to a non-existing 10.0.0.50, disable > IPv6, then “sudo herd stop nscd”, re-connect Network Manager (ping > gnu.org fails now) and LC_ALL=en_US.utf8 guix install hello. It > fails. Did I misunderstand the patch’s purpose or test in a wrong > way? This is the output: The thing is that this code is used by the internal ‘guix perform-download’ command, invoked by ‘guix-daemon’ when performing a source download. Thus, since you were still running the old daemon, you were using code lacking the Internet Archive fallback. To test it, you can first start the new daemon, along these lines: sudo herd stop guix-daemon sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild Another option is to call ‘url-fetch’ manually at the REPL. Thanks for testing! Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-20 7:25 ` Ludovic Courtès @ 2021-09-21 10:28 ` pelzflorian (Florian Pelz) 2021-09-21 16:34 ` pelzflorian (Florian Pelz) 2021-09-22 9:37 ` Ludovic Courtès 0 siblings, 2 replies; 25+ messages in thread From: pelzflorian (Florian Pelz) @ 2021-09-21 10:28 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 On Mon, Sep 20, 2021 at 09:25:27AM +0200, Ludovic Courtès wrote: > The thing is that this code is used by the internal ‘guix > perform-download’ command, invoked by ‘guix-daemon’ when performing a > source download. Thank you for enlightening me; I had not expected guix-daemon. Success! After ./bootstrap ./configure --localstatedir=/var make GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT=y make update-guix-package and git commit -a, guix pull, reconfigure and reboot, your web.archive.org patch downloads from web.archive.org with the steps from before: "pelzflorian (Florian Pelz)" <pelzflorian@pelzflorian.de> skribis: > I guix pull with the patch applied, add the IP from > > guix environment --ad-hoc bind:utils -- dig web.archive.org > > to /etc/hosts, set my DNS server to a non-existing 10.0.0.50, disable > IPv6, then “sudo herd stop nscd”, re-connect Network Manager (ping > gnu.org fails now) and LC_ALL=en_US.utf8 guix install hello. /var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2 says after various failures in name resolution it got downloaded from web.archive.org. I enjoy GNU Hello now. Thank you for making reproducibility easier. > To test it, you can first start the new daemon, along these lines: > > sudo herd stop guix-daemon > sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild No, going back one generation and guix gc -D’ing the /gnu/store/*hello-2.10* after adding web.archive.org to /etc/hosts again, I for some reason get a florian@florianacer ~$ bzcat /var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2 error: failed to run download program '/home/florian/src/guix/scripts/guix': Keine Berechtigung (Keine Berechtigung is German for Permission denied) but it does not matter, since the reconfigure and reboot works when and only when adding web.archive.org to /etc/hosts. Actually I will later take another look at this, because the manual says ./pre-inst-env guix-daemon should work. > Another option is to call ‘url-fetch’ manually at the REPL. This I didn’t try. Regards, Florian ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-21 10:28 ` pelzflorian (Florian Pelz) @ 2021-09-21 16:34 ` pelzflorian (Florian Pelz) 2021-09-22 9:37 ` Ludovic Courtès 1 sibling, 0 replies; 25+ messages in thread From: pelzflorian (Florian Pelz) @ 2021-09-21 16:34 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 On Tue, Sep 21, 2021 at 12:28:50PM +0200, pelzflorian (Florian Pelz) wrote: > On Mon, Sep 20, 2021 at 09:25:27AM +0200, Ludovic Courtès wrote: > > To test it, you can first start the new daemon, along these lines: > > > > sudo herd stop guix-daemon > > sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild > > No, going back one generation and guix gc -D’ing the > /gnu/store/*hello-2.10* after adding web.archive.org to /etc/hosts > again, I for some reason get a > > florian@florianacer ~$ bzcat /var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2 > error: failed to run download program '/home/florian/src/guix/scripts/guix': Keine Berechtigung > > (Keine Berechtigung is German for Permission denied) but it does not > matter, since the reconfigure and reboot works when and only when > adding web.archive.org to /etc/hosts. > > Actually I will later take another look at this, because the manual > says ./pre-inst-env guix-daemon should work. There is no regression. Without the web.archive.org patch, `guix install hello' via sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild always shows the same error, regardless of whether I misdirected DNS lookups or not. The patch is not at fault. Though I don’t know why. sudo -E strace -f ./pre-inst-env guix-daemon --build-users-group=guixbuild shows [pid 1854] execve("/home/florian/src/guix/scripts/guix", ["guix", "perform-download", "/gnu/store/wy24jyd0mm2jlgpzsxxli"..., "/gnu/store/hbdalsf5lpf01x4dcknwx"...], 0x1d8f9a0 /* 80 vars */) = -1 EACCES (Keine Berechtigung) <https://pubs.opengroup.org/onlinepubs/9699919799/> says: > The exec functions shall fail if: > … > [EACCES] > The new process image file is not a regular file and the implementation does not support execution of files of its type. > The exec functions, except for fexecve(), shall fail if: > [EACCES] > Search permission is denied for a directory listed in the new process image file's path prefix, or the new process image file denies execution permission. I run: florian@florianacer ~$ ls -ahl /home/florian/src/guix/scripts/guix -r-xr-xr-x 1 florian users 2,0K 21. Sep 07:30 /home/florian/src/guix/scripts/guix florian@florianacer ~$ ls -ahl /home/florian/src/guix | grep scripts drwxr-xr-x 2 florian users 4,0K 21. Sep 07:30 scripts/ florian@florianacer ~$ lsattr /home/florian/src/guix/scripts/guix --------------e----- /home/florian/src/guix/scripts/guix florian@florianacer ~ [env]$ cat test-execv.c #include <unistd.h> int main () { const char *const argv[] = { "guix", "perform-download", "/gnu/store/wy24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv", "/gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz.lock", NULL }; execv ("/home/florian/src/guix/scripts/guix", (char *const *) argv); return 0; } florian@florianacer ~ [env]$ gcc test-execv.c -o test-execv florian@florianacer ~ [env]$ LC_ALL=en_US.utf8 ~/test-execv Starting download of /gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz.lock From https://ftpmirror.gnu.org/gnu/hello/hello-2.10.tar.gz... following redirection to `https://ftp.wayne.edu/gnu/hello/hello-2.10.tar.gz'... In procedure open-file: Read-only file system: "/gnu/store/hbdalsf5lpf01x4dcknwx6xbn6n5km6k-hello-2.10.tar.gz.lock" [and more expected failures …] Whatever. It is not important. Regards, Florian ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-21 10:28 ` pelzflorian (Florian Pelz) 2021-09-21 16:34 ` pelzflorian (Florian Pelz) @ 2021-09-22 9:37 ` Ludovic Courtès 1 sibling, 0 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-09-22 9:37 UTC (permalink / raw) To: pelzflorian (Florian Pelz); +Cc: 50568 Hi! "pelzflorian (Florian Pelz)" <pelzflorian@pelzflorian.de> skribis: > On Mon, Sep 20, 2021 at 09:25:27AM +0200, Ludovic Courtès wrote: >> The thing is that this code is used by the internal ‘guix >> perform-download’ command, invoked by ‘guix-daemon’ when performing a >> source download. > > Thank you for enlightening me; I had not expected guix-daemon. > > Success! After > > ./bootstrap > ./configure --localstatedir=/var > make > GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT=y make update-guix-package > > and git commit -a, guix pull, reconfigure and reboot, your > web.archive.org patch downloads from web.archive.org with the steps > from before: That’s a heavy test, but great that it works as intended. I’ll push it soonish. > florian@florianacer ~$ bzcat /var/log/guix/drvs/wy/24jyd0mm2jlgpzsxxlip03df065g35-hello-2.10.tar.gz.drv.bz2 > error: failed to run download program '/home/florian/src/guix/scripts/guix': Keine Berechtigung That is weird indeed. Thanks for testing! Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-13 13:16 bug#50568: Missing source code Ludovic Courtès 2021-09-13 13:49 ` Maxime Devos @ 2021-09-13 13:49 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-09-13 14:30 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-10-04 20:05 ` Ludovic Courtès 2 siblings, 1 reply; 25+ messages in thread From: Tobias Geerinckx-Rice via Bug reports for GNU Guix @ 2021-09-13 13:49 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 [-- Attachment #1: Type: text/plain, Size: 246 bytes --] Ludo', I'm afraind I only have: Ludovic Courtès 写道： > /gnu/store/prbkg6vldsh1688fsigr33g4s8qla7rl-propeller-gcc-b4f45a4725e0b6d0af59e594c4e3e35ca4105867-checkout.drv Let me know where & how to send it. Kind regards, T G-R [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 247 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-13 13:49 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix @ 2021-09-13 14:30 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-09-14 8:40 ` Ludovic Courtès 0 siblings, 1 reply; 25+ messages in thread From: Tobias Geerinckx-Rice via Bug reports for GNU Guix @ 2021-09-13 14:30 UTC (permalink / raw) Cc: ludovic.courtes, 50568 [-- Attachment #1: Type: text/plain, Size: 251 bytes --] Tobias Geerinckx-Rice via Bug reports for GNU Guix 写道： > /gnu/store/prbkg6vldsh1688fsigr33g4s8qla7rl-propeller-gcc-b4f45a4725e0b6d0af59e594c4e3e35ca4105867-checkout.drv FTR, I don't think this one's actually down. Kind regards, T G-R [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 247 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-13 14:30 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix @ 2021-09-14 8:40 ` Ludovic Courtès 0 siblings, 0 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-09-14 8:40 UTC (permalink / raw) To: Tobias Geerinckx-Rice; +Cc: 50568 Tobias Geerinckx-Rice <me@tobias.gr> skribis: > Tobias Geerinckx-Rice via Bug reports for GNU Guix 写道： >> /gnu/store/prbkg6vldsh1688fsigr33g4s8qla7rl-propeller-gcc-b4f45a4725e0b6d0af59e594c4e3e35ca4105867-checkout.drv > > FTR, I don't think this one's actually down. Oops, indeed, this one’s available. Thanks, Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-09-13 13:16 bug#50568: Missing source code Ludovic Courtès 2021-09-13 13:49 ` Maxime Devos 2021-09-13 13:49 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix @ 2021-10-04 20:05 ` Ludovic Courtès 2021-10-05 14:16 ` Guillaume Le Vaillant 2021-10-07 13:53 ` Ludovic Courtès 2 siblings, 2 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-10-04 20:05 UTC (permalink / raw) To: 50568 Hi! Ludovic Courtès <ludovic.courtes@inria.fr> skribis: > As of current ‘master’ (ca. ec0e05ff306c950142c9ead7c712c749617069e7), > the following source code is missing (these are fixed-output > derivations): We now have ‘etc/source-manifest.scm’, meaning one can run¹: guix weather -m etc/source-manifest.scm This manifest is now built at ci.guix.gnu.org: https://ci.guix.gnu.org/jobset/source … which gives us a good overview of currently missing/mismatching source: https://ci.guix.gnu.org/eval/27221?status=failed So far 27 failures out of 16,315, roughly 0.2%. If you have copies of the missing/modified files that show up there, please share. Ludo’. ¹ https://lists.gnu.org/archive/html/guix-devel/2021-09/msg00174.html ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-04 20:05 ` Ludovic Courtès @ 2021-10-05 14:16 ` Guillaume Le Vaillant 2021-10-07 13:38 ` Ludovic Courtès 2021-10-07 13:53 ` Ludovic Courtès 1 sibling, 1 reply; 25+ messages in thread From: Guillaume Le Vaillant @ 2021-10-05 14:16 UTC (permalink / raw) To: Ludovic Courtès; +Cc: 50568 [-- Attachment #1.1: Type: text/plain, Size: 1489 bytes --] Ludovic Courtès <ludo@gnu.org> skribis: > Ludovic Courtès <ludovic.courtes@inria.fr> skribis: > >> As of current ‘master’ (ca. ec0e05ff306c950142c9ead7c712c749617069e7), >> the following source code is missing (these are fixed-output >> derivations): > > We now have ‘etc/source-manifest.scm’, meaning one can run: > > guix weather -m etc/source-manifest.scm > > This manifest is now built at ci.guix.gnu.org: > > https://ci.guix.gnu.org/jobset/source > > … which gives us a good overview of currently missing/mismatching > source: > > https://ci.guix.gnu.org/eval/27221?status=failed > > So far 27 failures out of 16,315, roughly 0.2%. > > If you have copies of the missing/modified files that show up there, > please share. Hi, I have the following ones in the store: - cl-gserver-1.8.0-checkout - gnu-standards-2020-11-25-checkout - golden-utils-0.0.0-3.fe1898f-checkout - xorg-server_1.20.10-3.diff.gz The attached archive contains the nars made with: --8<---------------cut here---------------start------------->8--- guix archive --export /gnu/store/... --8<---------------cut here---------------end--------------->8--- The signing key of the machine is: --8<---------------cut here---------------start------------->8--- (public-key (ecc (curve Ed25519) (q #988123DC42F034138C30903B80A78A6DC8B975A20D891D8DC3DD3CC4308D0D08#))) --8<---------------cut here---------------end--------------->8--- [-- Attachment #1.2: nars.tar.lz --] [-- Type: application/octet-stream, Size: 940876 bytes --] [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 247 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-05 14:16 ` Guillaume Le Vaillant @ 2021-10-07 13:38 ` Ludovic Courtès 0 siblings, 0 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-10-07 13:38 UTC (permalink / raw) To: Guillaume Le Vaillant; +Cc: 50568 Hi Guillaume, Guillaume Le Vaillant <glv@posteo.net> skribis: > I have the following ones in the store: Thanks! I’ve been able to address these in several ways: > - cl-gserver-1.8.0-checkout commit f7f036e7c369515ad678cc08dd5bc9e254804d38 (do take a look at the comment in that commit…) > - gnu-standards-2020-11-25-checkout CVS doesn’t go through the firewall at berlin, so I manually added it to the store (not great). > - golden-utils-0.0.0-3.fe1898f-checkout commit ef93b238f64c1a27270cae78772b60d63088a026 > - xorg-server_1.20.10-3.diff.gz manually added to the store; problem is that this file has disappeared upstream, AFAICS, so it would be best to change this package definition, possibly adding copy of the diff.gz file to the repo? Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-04 20:05 ` Ludovic Courtès 2021-10-05 14:16 ` Guillaume Le Vaillant @ 2021-10-07 13:53 ` Ludovic Courtès 2021-10-07 15:17 ` Maxime Devos 2021-10-11 9:55 ` zimoun 1 sibling, 2 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-10-07 13:53 UTC (permalink / raw) To: 50568; +Cc: Ricardo Wurmus Ludovic Courtès <ludo@gnu.org> skribis: > https://ci.guix.gnu.org/eval/27221?status=failed We’re left with the following missing bioconductor.org tarballs: AnnotationFuncs_1.40.0.tar.gz AneuFinderData_1.18.0.tar.gz BiocCaseStudies_1.52.0.tar.gz chromstaRData_1.16.0.tar.gz genomationData_1.22.0.tar.gz and a hash mismatch for: texlive-marginnote-51265-checkout Zimoun, Ricardo: do you know how to address the bioconductor.org issue? Ricardo: do you still have a copy of texlive-marginnote-51265-checkout with the hash as it currently appears on master? We’ll probably end up just updating the hash, but it’d be nice to check the differences. Once we’re done with those, we’ll have 100% source coverage on ci.guix. At that point, we can start building Disarchive metadata. TIA! Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-07 13:53 ` Ludovic Courtès @ 2021-10-07 15:17 ` Maxime Devos 2021-10-07 17:01 ` Ludovic Courtès 2021-10-11 9:55 ` zimoun 1 sibling, 1 reply; 25+ messages in thread From: Maxime Devos @ 2021-10-07 15:17 UTC (permalink / raw) To: Ludovic Courtès, 50568; +Cc: Ricardo Wurmus [-- Attachment #1: Type: text/plain, Size: 630 bytes --] Ludovic Courtès schreef op do 07-10-2021 om 15:53 [+0200]: > Ludovic Courtès <ludo@gnu.org> skribis: > > > https://ci.guix.gnu.org/eval/27221?status=failed > > We’re left with the following missing bioconductor.org tarballs: > > AnnotationFuncs_1.40.0.tar.gz > AneuFinderData_1.18.0.tar.gz > BiocCaseStudies_1.52.0.tar.gz > chromstaRData_1.16.0.tar.gz > genomationData_1.22.0.tar.gz Running "guix build --source r-annotationfuncs r-aneufinderdata r-bioccasestudies r-chromstardata r-genomationdata" succeeds on my computer. They are downloaded from bayfront.guix.gnu.org. Greetings, Maxime [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 260 bytes --] ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-07 15:17 ` Maxime Devos @ 2021-10-07 17:01 ` Ludovic Courtès 0 siblings, 0 replies; 25+ messages in thread From: Ludovic Courtès @ 2021-10-07 17:01 UTC (permalink / raw) To: Maxime Devos; +Cc: Ricardo Wurmus, 50568 Maxime Devos <maximedevos@telenet.be> skribis: > Ludovic Courtès schreef op do 07-10-2021 om 15:53 [+0200]: >> Ludovic Courtès <ludo@gnu.org> skribis: >> >> > https://ci.guix.gnu.org/eval/27221?status=failed >> >> We’re left with the following missing bioconductor.org tarballs: >> >> AnnotationFuncs_1.40.0.tar.gz >> AneuFinderData_1.18.0.tar.gz >> BiocCaseStudies_1.52.0.tar.gz >> chromstaRData_1.16.0.tar.gz >> genomationData_1.22.0.tar.gz > > Running "guix build --source r-annotationfuncs r-aneufinderdata r-bioccasestudies r-chromstardata r-genomationdata" > succeeds on my computer. They are downloaded from bayfront.guix.gnu.org. Indeed, fixed! Currently bayfront.guix.gnu.org doesn’t run ‘guix publish’, so it doesn’t support the /file URL scheme, which means I had to do this manually. We’ll fix it! Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-07 13:53 ` Ludovic Courtès 2021-10-07 15:17 ` Maxime Devos @ 2021-10-11 9:55 ` zimoun 2021-10-12 9:50 ` Ludovic Courtès 1 sibling, 1 reply; 25+ messages in thread From: zimoun @ 2021-10-11 9:55 UTC (permalink / raw) To: Ludovic Courtès; +Cc: Ricardo Wurmus, 50568 Hi Ludo, On Thu, 7 Oct 2021 at 15:53, Ludovic Courtès <ludo@gnu.org> wrote: > > Ludovic Courtès <ludo@gnu.org> skribis: > > > https://ci.guix.gnu.org/eval/27221?status=failed > > We’re left with the following missing bioconductor.org tarballs: > > AnnotationFuncs_1.40.0.tar.gz I pick this one. Cuirass says Succeeded with the log: https://ci.guix.gnu.org/build/1000819/log/raw Well, I do not know what is this 141.80.167.131 IP address. Something related to Bayfront, right? > AneuFinderData_1.18.0.tar.gz > BiocCaseStudies_1.52.0.tar.gz > chromstaRData_1.16.0.tar.gz > genomationData_1.22.0.tar.gz > Zimoun, Ricardo: do you know how to address the bioconductor.org issue? From the evaluation you mention above, all these had succeeded. Could you confirm it is fine? BTW, for the interested reader, I would like to point this bug#39885 [1] about Bioconductor, URI, fallback and time-machine which appears to me related. In addition to the two options proposed, another one not listed but discussed elsewhere is to switch Bioconductor packages from url-fetch to git-fecth. 1: <http://issues.guix.gnu.org/issue/39885> All the best, simoon ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-11 9:55 ` zimoun @ 2021-10-12 9:50 ` Ludovic Courtès 2021-10-12 11:08 ` zimoun 0 siblings, 1 reply; 25+ messages in thread From: Ludovic Courtès @ 2021-10-12 9:50 UTC (permalink / raw) To: zimoun; +Cc: Ricardo Wurmus, 50568 Hi, zimoun <zimon.toutoune@gmail.com> skribis: > On Thu, 7 Oct 2021 at 15:53, Ludovic Courtès <ludo@gnu.org> wrote: >> >> Ludovic Courtès <ludo@gnu.org> skribis: >> >> > https://ci.guix.gnu.org/eval/27221?status=failed >> >> We’re left with the following missing bioconductor.org tarballs: >> >> AnnotationFuncs_1.40.0.tar.gz > > I pick this one. Cuirass says Succeeded with the log: > > https://ci.guix.gnu.org/build/1000819/log/raw > > Well, I do not know what is this 141.80.167.131 IP address. Something > related to Bayfront, right? > > >> AneuFinderData_1.18.0.tar.gz >> BiocCaseStudies_1.52.0.tar.gz >> chromstaRData_1.16.0.tar.gz >> genomationData_1.22.0.tar.gz > >> Zimoun, Ricardo: do you know how to address the bioconductor.org issue? > > From the evaluation you mention above, all these had succeeded. Could > you confirm it is fine? It is: I fetched copies from bayfront, IIRC. > BTW, for the interested reader, I would like to point this bug#39885 > [1] about Bioconductor, URI, fallback and time-machine which appears > to me related. In addition to the two options proposed, another one > not listed but discussed elsewhere is to switch Bioconductor packages > from url-fetch to git-fecth. > > 1: <http://issues.guix.gnu.org/issue/39885> Very relevant! How can we avoid those brittle bioconductor.org URLs? Thanks, Ludo’. ^ permalink raw reply [flat|nested] 25+ messages in thread
* bug#50568: Missing source code 2021-10-12 9:50 ` Ludovic Courtès @ 2021-10-12 11:08 ` zimoun 0 siblings, 0 replies; 25+ messages in thread From: zimoun @ 2021-10-12 11:08 UTC (permalink / raw) To: Ludovic Courtès; +Cc: Ricardo Wurmus, 50568 Hi, On Tue, 12 Oct 2021 at 11:50, Ludovic Courtès <ludo@gnu.org> wrote: >> BTW, for the interested reader, I would like to point this bug#39885 >> [1] about Bioconductor, URI, fallback and time-machine which appears >> to me related. In addition to the two options proposed, another one >> not listed but discussed elsewhere is to switch Bioconductor packages >> from url-fetch to git-fecth. >> >> 1: <http://issues.guix.gnu.org/issue/39885> > > Very relevant! How can we avoid those brittle bioconductor.org URLs? By addressing the mentioned bug. ;-) Do not hold your breath, it is low in my TODO list. The next Bioconductor release v3.14 is planned for Wednesday October 27. Therefore, let make it happens for v3.15. :-) Cheers, simon ^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2021-10-12 11:35 UTC | newest] Thread overview: 25+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-09-13 13:16 bug#50568: Missing source code Ludovic Courtès 2021-09-13 13:49 ` Maxime Devos 2021-09-14 8:38 ` Ludovic Courtès 2021-09-14 8:54 ` zimoun 2021-09-16 19:28 ` Ludovic Courtès 2021-09-17 10:10 ` zimoun 2021-09-14 9:36 ` pelzflorian (Florian Pelz) 2021-09-16 19:45 ` Ludovic Courtès 2021-09-17 10:46 ` pelzflorian (Florian Pelz) 2021-09-20 7:25 ` Ludovic Courtès 2021-09-21 10:28 ` pelzflorian (Florian Pelz) 2021-09-21 16:34 ` pelzflorian (Florian Pelz) 2021-09-22 9:37 ` Ludovic Courtès 2021-09-13 13:49 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-09-13 14:30 ` Tobias Geerinckx-Rice via Bug reports for GNU Guix 2021-09-14 8:40 ` Ludovic Courtès 2021-10-04 20:05 ` Ludovic Courtès 2021-10-05 14:16 ` Guillaume Le Vaillant 2021-10-07 13:38 ` Ludovic Courtès 2021-10-07 13:53 ` Ludovic Courtès 2021-10-07 15:17 ` Maxime Devos 2021-10-07 17:01 ` Ludovic Courtès 2021-10-11 9:55 ` zimoun 2021-10-12 9:50 ` Ludovic Courtès 2021-10-12 11:08 ` zimoun
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/guix.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).