From: Maxim Cournoyer <maxim.cournoyer@gmail.com>
To: Maxime Devos <maximedevos@telenet.be>
Cc: Luke Dashjr <luke@dashjr.org>, 55273@debbugs.gnu.org
Subject: bug#55273: guile-git is not reproducible
Date: Tue, 12 Jul 2022 10:08:35 -0400 [thread overview]
Message-ID: <87edyq8luk.fsf_-_@gmail.com> (raw)
In-Reply-To: <0eb30f2579d7864496a345bae79e1fb43177626e.camel@telenet.be> (Maxime Devos's message of "Fri, 06 May 2022 20:23:09 +0200")
Hello,
Maxime Devos <maximedevos@telenet.be> writes:
[...]
> Currently, GUILE_AUTO_COMPILE=0 is set, so dependencies are not
> compiled before compiling dependent modules -- except when if one of
> the modules was compiled already! Maybe removing
> 'GUILE_AUTO_COMPILE=0' will fix things?
Nope, I just tried removing that from the make flags, and I get:
--8<---------------cut here---------------start------------->8---
$ diffoscope /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2{,-check}
--- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2
+++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check
│ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib
├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib
│ │ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib/guile
│ ├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib/guile
│ │ │ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib/guile/3.0
│ │ ├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib/guile/3.0
│ │ │ │ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib/guile/3.0/site-ccache
│ │ │ ├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib/guile/3.0/site-ccache
│ │ │ │ │ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib/guile/3.0/site-ccache/git
│ │ │ │ ├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib/guile/3.0/site-ccache/git
│ │ │ │ │ │ --- /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2/lib/guile/3.0/site-ccache/git/cherrypick.go
│ │ │ │ │ ├── +++ /gnu/store/cxy4qah604i719ha1hl8iz2h56xjn0vs-guile-git-0.5.2-check/lib/guile/3.0/site-ccache/git/cherrypick.go
│ │ │ │ │ │ ├── readelf --wide --sections {}
│ │ │ │ │ │ │┄ error from `readelf --wide --sections {}`:
│ │ │ │ │ │ │┄ readelf: Warning: [ 6]: Link field (0) should index a string section.
│ │ │ │ │ │ │ @@ -5,26 +5,26 @@
│ │ │ │ │ │ │ [ 0] NULL 0000000000000000 000000 000000 00 0 0 0
│ │ │ │ │ │ │ [ 1] .guile.procprops PROGBITS 0000000000000000 010de8 000000 00 0 0 8
│ │ │ │ │ │ │ [ 2] .rodata PROGBITS 0000000000000a50 000a50 000458 00 A 0 0 8
│ │ │ │ │ │ │ [ 3] .data PROGBITS 0000000000010000 010000 000710 00 WA 0 0 8
│ │ │ │ │ │ │ [ 4] .rtl-text PROGBITS 00000000000000e8 0000e8 000968 00 A 0 0 8
│ │ │ │ │ │ │ [ 5] .guile.frame-maps PROGBITS 0000000000000ea8 000ea8 000011 00 A 0 0 8
│ │ │ │ │ │ │ [ 6] .dynamic DYNAMIC 0000000000000ec0 000ec0 000070 00 A 0 0 8
│ │ │ │ │ │ │ + [ 7] .strtab STRTAB 0000000000000000 010fd0 000001 00 0 0 8
│ │ │ │ │ │ │ + [ 8] .symtab SYMTAB 0000000000000000 010f70 000060 18 7 0 8
│ │ │ │ │ │ │ + [ 9] .guile.arities.strtab STRTAB 0000000000000000 010fd8 00009d 00 0 0 8
│ │ │ │ │ │ │ - [ 7] .strtab STRTAB 0000000000000000 010fa0 000001 00 0 0 8
│ │ │ │ │ │ │ - [ 8] .symtab SYMTAB 0000000000000000 010f40 000060 18 7 0 8
│ │ │ │ │ │ │ - [ 9] .guile.arities.strtab STRTAB 0000000000000000 010fa8 00009d 00 0 0 8
│ │ │ │ │ │ │ [10] .guile.arities PROGBITS 0000000000000000 010c50 000196 00 9 0 8
│ │ │ │ │ │ │ + [11] .guile.docstrs.strtab STRTAB 0000000000000000 011078 000001 00 0 0 8
│ │ │ │ │ │ │ - [11] .guile.docstrs.strtab STRTAB 0000000000000000 011048 000001 00 0 0 8
│ │ │ │ │ │ │ [12] .guile.docstrs PROGBITS 0000000000000000 010de8 000000 00 11 0 8
│ │ │ │ │ │ │ [13] .debug_info PROGBITS 0000000000000000 010de8 00004c 00 0 0 8
│ │ │ │ │ │ │ [14] .debug_abbrev PROGBITS 0000000000000000 010e38 000022 00 0 0 8
│ │ │ │ │ │ │ [15] .debug_str PROGBITS 0000000000000000 010e60 00000d 00 0 0 8
│ │ │ │ │ │ │ [16] .debug_loc PROGBITS 0000000000000000 010e70 000000 00 0 0 8
│ │ │ │ │ │ │ + [17] .debug_line PROGBITS 0000000000000000 010e70 000100 00 0 0 8
│ │ │ │ │ │ │ + [18] .shstrtab STRTAB 0000000000000000 011080 0000e5 00 0 0 8
│ │ │ │ │ │ │ - [17] .debug_line PROGBITS 0000000000000000 010e70 0000ce 00 0 0 8
│ │ │ │ │ │ │ - [18] .shstrtab STRTAB 0000000000000000 011050 0000e5 00 0 0 8
│ │ │ │ │ │ │ [19] PROGBITS 0000000000000000 000000 0000e8 00 A 0 0 8
│ │ │ │ │ │ │ [20] PROGBITS 0000000000000000 010710 000540 00 0 0 8
│ │ │ │ │ │ │ Key to Flags:
│ │ │ │ │ │ │ W (write), A (alloc), X (execute), M (merge), S (strings), I (info),
│ │ │ │ │ │ │ L (link order), O (extra OS processing required), G (group), T (TLS),
│ │ │ │ │ │ │ C (compressed), x (unknown), o (OS specific), E (exclude),
│ │ │ │ │ │ │ p (processor specific)
│ │ │ │ │ │ ├── readelf --wide --debug-dump=rawline {}
│ │ │ │ │ │ │ @@ -1,13 +1,13 @@
│ │ │ │ │ │ │ Raw dump of debug contents of section .debug_line:
│ │ │ │ │ │ │
│ │ │ │ │ │ │ Offset: 0x0
│ │ │ │ │ │ │ + Length: 252
│ │ │ │ │ │ │ - Length: 202
│ │ │ │ │ │ │ DWARF Version: 2
│ │ │ │ │ │ │ + Prologue Length: 78
│ │ │ │ │ │ │ - Prologue Length: 58
│ │ │ │ │ │ │ Minimum Instruction Length: 4
│ │ │ │ │ │ │ Initial value of 'is_stmt': 1
│ │ │ │ │ │ │ Line Base: -4
│ │ │ │ │ │ │ Line Range: 15
│ │ │ │ │ │ │ Opcode Base: 10
│ │ │ │ │ │ │
│ │ │ │ │ │ │ Opcodes:
│ │ │ │ │ │ │ @@ -21,87 +21,104 @@
│ │ │ │ │ │ │ Opcode 8 has 0 args
│ │ │ │ │ │ │ Opcode 9 has 1 arg
│ │ │ │ │ │ │
│ │ │ │ │ │ │ The Directory Table is empty.
│ │ │ │ │ │ │
│ │ │ │ │ │ │ The File Name Table (offset 0x19):
│ │ │ │ │ │ │ Entry Dir Time Size Name
│ │ │ │ │ │ │ + 1 0 0 0 git/bindings.scm
│ │ │ │ │ │ │ + 2 0 0 0 git/cherrypick.scm
│ │ │ │ │ │ │ + 3 0 0 0 ice-9/boot-9.scm
│ │ │ │ │ │ │ - 1 0 0 0 git/cherrypick.scm
│ │ │ │ │ │ │ - 2 0 0 0 ice-9/boot-9.scm
│ │ │ │ │ │ │
│ │ │ │ │ │ │ Line Number Statements:
│ │ │ │ │ │ │ + [0x00000058] Extended opcode 2: set Address to 0xe8
│ │ │ │ │ │ │ + [0x00000063] Set column to 1
│ │ │ │ │ │ │ + [0x00000065] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x00000067] Advance Line by 27 to 28
│ │ │ │ │ │ │ + [0x00000069] Special opcode 4: advance Address by 0 to 0xe8 and Line by 0 to 28
│ │ │ │ │ │ │ + [0x0000006a] Advance Line by -8 to 20
│ │ │ │ │ │ │ + [0x0000006c] Special opcode 49: advance Address by 12 to 0xf4 and Line by 0 to 20
│ │ │ │ │ │ │ + [0x0000006d] Set column to 25
│ │ │ │ │ │ │ + [0x0000006f] Set File Name to entry 3 in the File Name Table
│ │ │ │ │ │ │ + [0x00000071] Advance Line by 3896 to 3916
│ │ │ │ │ │ │ + [0x00000074] Special opcode 34: advance Address by 8 to 0xfc and Line by 0 to 3916
│ │ │ │ │ │ │ + [0x00000075] Set column to 1
│ │ │ │ │ │ │ + [0x00000077] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x00000079] Advance Line by -3896 to 20
│ │ │ │ │ │ │ + [0x0000007c] Special opcode 34: advance Address by 8 to 0x104 and Line by 0 to 20
│ │ │ │ │ │ │ + [0x0000007d] Set column to 44
│ │ │ │ │ │ │ + [0x0000007f] Set File Name to entry 3 in the File Name Table
│ │ │ │ │ │ │ + [0x00000081] Advance Line by 3819 to 3839
│ │ │ │ │ │ │ + [0x00000084] Special opcode 34: advance Address by 8 to 0x10c and Line by 0 to 3839
│ │ │ │ │ │ │ + [0x00000085] Set column to 1
│ │ │ │ │ │ │ + [0x00000087] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x00000089] Advance Line by -3819 to 20
│ │ │ │ │ │ │ + [0x0000008c] Special opcode 34: advance Address by 8 to 0x114 and Line by 0 to 20
│ │ │ │ │ │ │ + [0x0000008d] Set column to 44
│ │ │ │ │ │ │ + [0x0000008f] Set File Name to entry 3 in the File Name Table
│ │ │ │ │ │ │ + [0x00000091] Advance Line by 3820 to 3840
│ │ │ │ │ │ │ + [0x00000094] Special opcode 34: advance Address by 8 to 0x11c and Line by 0 to 3840
│ │ │ │ │ │ │ + [0x00000095] Set column to 1
│ │ │ │ │ │ │ + [0x00000097] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x00000099] Advance Line by -3820 to 20
│ │ │ │ │ │ │ + [0x0000009c] Special opcode 34: advance Address by 8 to 0x124 and Line by 0 to 20
│ │ │ │ │ │ │ + [0x0000009d] Set column to 36
│ │ │ │ │ │ │ + [0x0000009f] Set File Name to entry 3 in the File Name Table
│ │ │ │ │ │ │ + [0x000000a1] Advance Line by 3825 to 3845
│ │ │ │ │ │ │ + [0x000000a4] Special opcode 34: advance Address by 8 to 0x12c and Line by 0 to 3845
│ │ │ │ │ │ │ + [0x000000a5] Set column to 24
│ │ │ │ │ │ │ + [0x000000a7] Advance Line by 70 to 3915
│ │ │ │ │ │ │ + [0x000000aa] Special opcode 49: advance Address by 12 to 0x138 and Line by 0 to 3915
│ │ │ │ │ │ │ + [0x000000ab] Set column to 17
│ │ │ │ │ │ │ + [0x000000ad] Advance PC by constant 64 to 0x178
│ │ │ │ │ │ │ + [0x000000ae] Special opcode 171: advance Address by 44 to 0x1a4 and Line by 2 to 3917
│ │ │ │ │ │ │ + [0x000000af] Set column to 1
│ │ │ │ │ │ │ + [0x000000b1] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x000000b3] Advance Line by -3889 to 28
│ │ │ │ │ │ │ + [0x000000b6] Advance PC by constant 64 to 0x1e4
│ │ │ │ │ │ │ + [0x000000b7] Special opcode 19: advance Address by 4 to 0x1e8 and Line by 0 to 28
│ │ │ │ │ │ │ + [0x000000b8] Set column to 35
│ │ │ │ │ │ │ + [0x000000ba] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ + [0x000000bc] Advance Line by 52 to 80
│ │ │ │ │ │ │ + [0x000000be] Special opcode 94: advance Address by 24 to 0x200 and Line by 0 to 80
│ │ │ │ │ │ │ + [0x000000bf] Set column to 36
│ │ │ │ │ │ │ + [0x000000c1] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x000000c3] Advance Line by -51 to 29
│ │ │ │ │ │ │ + [0x000000c5] Special opcode 184: advance Address by 48 to 0x230 and Line by 0 to 29
│ │ │ │ │ │ │ + [0x000000c6] Set column to 53
│ │ │ │ │ │ │ + [0x000000c8] Special opcode 34: advance Address by 8 to 0x238 and Line by 0 to 29
│ │ │ │ │ │ │ + [0x000000c9] Set column to 16
│ │ │ │ │ │ │ + [0x000000cb] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ + [0x000000cd] Advance Line by 51 to 80
│ │ │ │ │ │ │ + [0x000000cf] Special opcode 34: advance Address by 8 to 0x240 and Line by 0 to 80
│ │ │ │ │ │ │ + [0x000000d0] Set column to 15
│ │ │ │ │ │ │ + [0x000000d2] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ + [0x000000d4] Advance Line by -51 to 29
│ │ │ │ │ │ │ + [0x000000d6] Advance PC by constant 64 to 0x280
│ │ │ │ │ │ │ + [0x000000d7] Special opcode 64: advance Address by 16 to 0x290 and Line by 0 to 29
│ │ │ │ │ │ │ + [0x000000d8] Set column to 5
│ │ │ │ │ │ │ + [0x000000da] Special opcode 35: advance Address by 8 to 0x298 and Line by 1 to 30
│ │ │ │ │ │ │ + [0x000000db] Set column to 1
│ │ │ │ │ │ │ + [0x000000dd] Special opcode 167: advance Address by 44 to 0x2c4 and Line by -2 to 28
│ │ │ │ │ │ │ + [0x000000de] Set column to 5
│ │ │ │ │ │ │ + [0x000000e0] Special opcode 81: advance Address by 20 to 0x2d8 and Line by 2 to 30
│ │ │ │ │ │ │ + [0x000000e1] Set column to 13
│ │ │ │ │ │ │ + [0x000000e3] Special opcode 50: advance Address by 12 to 0x2e4 and Line by 1 to 31
│ │ │ │ │ │ │ + [0x000000e4] Advance PC by 144 to 0x374
│ │ │ │ │ │ │ + [0x000000e6] Special opcode 5: advance Address by 0 to 0x374 and Line by 1 to 32
│ │ │ │ │ │ │ + [0x000000e7] Advance PC by constant 64 to 0x3b4
│ │ │ │ │ │ │ + [0x000000e8] Special opcode 215: advance Address by 56 to 0x3ec and Line by 1 to 33
│ │ │ │ │ │ │ + [0x000000e9] Set column to 7
│ │ │ │ │ │ │ + [0x000000eb] Special opcode 227: advance Address by 60 to 0x428 and Line by -2 to 31
│ │ │ │ │ │ │ + [0x000000ec] Set column to 13
│ │ │ │ │ │ │ + [0x000000ee] Special opcode 65: advance Address by 16 to 0x438 and Line by 1 to 32
│ │ │ │ │ │ │ + [0x000000ef] Special opcode 153: advance Address by 40 to 0x460 and Line by -1 to 31
│ │ │ │ │ │ │ + [0x000000f0] Set column to 15
│ │ │ │ │ │ │ + [0x000000f2] Special opcode 152: advance Address by 40 to 0x488 and Line by -2 to 29
│ │ │ │ │ │ │ + [0x000000f3] Set column to 12
│ │ │ │ │ │ │ + [0x000000f5] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ + [0x000000f7] Advance Line by 55 to 84
│ │ │ │ │ │ │ + [0x000000f9] Special opcode 244: advance Address by 64 to 0x4c8 and Line by 0 to 84
│ │ │ │ │ │ │ + [0x000000fa] Advance PC by 1416 to 0xa50
│ │ │ │ │ │ │ + [0x000000fd] Extended opcode 1: End of Sequence
│ │ │ │ │ │ │ - [0x00000044] Extended opcode 2: set Address to 0xe8
│ │ │ │ │ │ │ - [0x0000004f] Set column to 1
│ │ │ │ │ │ │ - [0x00000051] Advance Line by 27 to 28
│ │ │ │ │ │ │ - [0x00000053] Special opcode 4: advance Address by 0 to 0xe8 and Line by 0 to 28
│ │ │ │ │ │ │ - [0x00000054] Advance Line by -8 to 20
│ │ │ │ │ │ │ - [0x00000056] Special opcode 49: advance Address by 12 to 0xf4 and Line by 0 to 20
│ │ │ │ │ │ │ - [0x00000057] Set column to 25
│ │ │ │ │ │ │ - [0x00000059] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ - [0x0000005b] Advance Line by 3896 to 3916
│ │ │ │ │ │ │ - [0x0000005e] Special opcode 34: advance Address by 8 to 0xfc and Line by 0 to 3916
│ │ │ │ │ │ │ - [0x0000005f] Set column to 1
│ │ │ │ │ │ │ - [0x00000061] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ - [0x00000063] Advance Line by -3896 to 20
│ │ │ │ │ │ │ - [0x00000066] Special opcode 34: advance Address by 8 to 0x104 and Line by 0 to 20
│ │ │ │ │ │ │ - [0x00000067] Set column to 44
│ │ │ │ │ │ │ - [0x00000069] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ - [0x0000006b] Advance Line by 3819 to 3839
│ │ │ │ │ │ │ - [0x0000006e] Special opcode 34: advance Address by 8 to 0x10c and Line by 0 to 3839
│ │ │ │ │ │ │ - [0x0000006f] Set column to 1
│ │ │ │ │ │ │ - [0x00000071] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ - [0x00000073] Advance Line by -3819 to 20
│ │ │ │ │ │ │ - [0x00000076] Special opcode 34: advance Address by 8 to 0x114 and Line by 0 to 20
│ │ │ │ │ │ │ - [0x00000077] Set column to 44
│ │ │ │ │ │ │ - [0x00000079] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ - [0x0000007b] Advance Line by 3820 to 3840
│ │ │ │ │ │ │ - [0x0000007e] Special opcode 34: advance Address by 8 to 0x11c and Line by 0 to 3840
│ │ │ │ │ │ │ - [0x0000007f] Set column to 1
│ │ │ │ │ │ │ - [0x00000081] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ - [0x00000083] Advance Line by -3820 to 20
│ │ │ │ │ │ │ - [0x00000086] Special opcode 34: advance Address by 8 to 0x124 and Line by 0 to 20
│ │ │ │ │ │ │ - [0x00000087] Set column to 36
│ │ │ │ │ │ │ - [0x00000089] Set File Name to entry 2 in the File Name Table
│ │ │ │ │ │ │ - [0x0000008b] Advance Line by 3825 to 3845
│ │ │ │ │ │ │ - [0x0000008e] Special opcode 34: advance Address by 8 to 0x12c and Line by 0 to 3845
│ │ │ │ │ │ │ - [0x0000008f] Set column to 24
│ │ │ │ │ │ │ - [0x00000091] Advance Line by 70 to 3915
│ │ │ │ │ │ │ - [0x00000094] Special opcode 49: advance Address by 12 to 0x138 and Line by 0 to 3915
│ │ │ │ │ │ │ - [0x00000095] Set column to 17
│ │ │ │ │ │ │ - [0x00000097] Advance PC by constant 64 to 0x178
│ │ │ │ │ │ │ - [0x00000098] Special opcode 171: advance Address by 44 to 0x1a4 and Line by 2 to 3917
│ │ │ │ │ │ │ - [0x00000099] Set column to 1
│ │ │ │ │ │ │ - [0x0000009b] Set File Name to entry 1 in the File Name Table
│ │ │ │ │ │ │ - [0x0000009d] Advance Line by -3889 to 28
│ │ │ │ │ │ │ - [0x000000a0] Advance PC by constant 64 to 0x1e4
│ │ │ │ │ │ │ - [0x000000a1] Special opcode 19: advance Address by 4 to 0x1e8 and Line by 0 to 28
│ │ │ │ │ │ │ - [0x000000a2] Set column to 36
│ │ │ │ │ │ │ - [0x000000a4] Advance PC by constant 64 to 0x228
│ │ │ │ │ │ │ - [0x000000a5] Special opcode 35: advance Address by 8 to 0x230 and Line by 1 to 29
│ │ │ │ │ │ │ - [0x000000a6] Set column to 53
│ │ │ │ │ │ │ - [0x000000a8] Special opcode 34: advance Address by 8 to 0x238 and Line by 0 to 29
│ │ │ │ │ │ │ - [0x000000a9] Set column to 15
│ │ │ │ │ │ │ - [0x000000ab] Special opcode 34: advance Address by 8 to 0x240 and Line by 0 to 29
│ │ │ │ │ │ │ - [0x000000ac] Set column to 5
│ │ │ │ │ │ │ - [0x000000ae] Advance PC by constant 64 to 0x280
│ │ │ │ │ │ │ - [0x000000af] Special opcode 95: advance Address by 24 to 0x298 and Line by 1 to 30
│ │ │ │ │ │ │ - [0x000000b0] Set column to 1
│ │ │ │ │ │ │ - [0x000000b2] Special opcode 167: advance Address by 44 to 0x2c4 and Line by -2 to 28
│ │ │ │ │ │ │ - [0x000000b3] Set column to 5
│ │ │ │ │ │ │ - [0x000000b5] Special opcode 81: advance Address by 20 to 0x2d8 and Line by 2 to 30
│ │ │ │ │ │ │ - [0x000000b6] Set column to 13
│ │ │ │ │ │ │ - [0x000000b8] Special opcode 50: advance Address by 12 to 0x2e4 and Line by 1 to 31
│ │ │ │ │ │ │ - [0x000000b9] Advance PC by 144 to 0x374
│ │ │ │ │ │ │ - [0x000000bb] Special opcode 5: advance Address by 0 to 0x374 and Line by 1 to 32
│ │ │ │ │ │ │ - [0x000000bc] Advance PC by constant 64 to 0x3b4
│ │ │ │ │ │ │ - [0x000000bd] Special opcode 215: advance Address by 56 to 0x3ec and Line by 1 to 33
│ │ │ │ │ │ │ - [0x000000be] Set column to 7
│ │ │ │ │ │ │ - [0x000000c0] Special opcode 227: advance Address by 60 to 0x428 and Line by -2 to 31
│ │ │ │ │ │ │ - [0x000000c1] Set column to 13
│ │ │ │ │ │ │ - [0x000000c3] Special opcode 65: advance Address by 16 to 0x438 and Line by 1 to 32
│ │ │ │ │ │ │ - [0x000000c4] Special opcode 153: advance Address by 40 to 0x460 and Line by -1 to 31
│ │ │ │ │ │ │ - [0x000000c5] Set column to 15
│ │ │ │ │ │ │ - [0x000000c7] Special opcode 152: advance Address by 40 to 0x488 and Line by -2 to 29
│ │ │ │ │ │ │ - [0x000000c8] Advance PC by 1480 to 0xa50
│ │ │ │ │ │ │ - [0x000000cb] Extended opcode 1: End of Sequence
│ │ │ │ │ │ ├── strings --all --bytes=8 {}
│ │ │ │ │ │ │ @@ -21,14 +21,15 @@
│ │ │ │ │ │ │ Wrong type argument in position 1 (expecting struct): ~S
│ │ │ │ │ │ │ repository->pointer
│ │ │ │ │ │ │ raise-git-error
│ │ │ │ │ │ │
│ │ │ │ │ │ │ 4 <(D0L8P@XHtH|H
│ │ │ │ │ │ │ 0 L T X d"d"p$|*
│ │ │ │ │ │ │ Guile 3.0.7
│ │ │ │ │ │ │ +git/bindings.scm
│ │ │ │ │ │ │ git/cherrypick.scm
│ │ │ │ │ │ │ ice-9/boot-9.scm
│ │ │ │ │ │ │ cherrypick
│ │ │ │ │ │ │ repository
│ │ │ │ │ │ │ .guile.procprops
│ │ │ │ │ │ │ .rtl-text
│ │ │ │ │ │ │ .guile.frame-maps
│ │ │ │ │ │ ├── /gnu/store/8fpk2cja3f07xls48jfnpgrzrljpqivr-coreutils-8.32/bin/stat {}
│ │ │ │ │ │ │ @@ -1,8 +1,8 @@
│ │ │ │ │ │ │
│ │ │ │ │ │ │ + Size: 69989 Blocks: 144 IO Block: 4096 regular file
│ │ │ │ │ │ │ +Links: 1
│ │ │ │ │ │ │ - Size: 69941 Blocks: 144 IO Block: 4096 regular file
│ │ │ │ │ │ │ -Links: 12
│ │ │ │ │ │ │ Access: (0444/-r--r--r--) Uid: ( 0/ root) Gid: ( 0/ root)
│ │ │ │ │ │ │
│ │ │ │ │ │ │ Modify: 1970-01-01 00:00:01.000000000 +0000
--8<---------------cut here---------------end--------------->8---
Thanks,
Maxim
prev parent reply other threads:[~2022-07-12 14:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 13:33 bug#55273: failed to compute the derivation for Guix (version: "b80ca672de936a76368de6e6ea0b28505e74d420"; system: "x86_64-linux"; Luke Dashjr
2022-05-06 17:57 ` Maxime Devos
2022-05-06 17:58 ` Maxime Devos
2022-05-06 18:49 ` Luke Dashjr
2022-05-06 19:40 ` Maxime Devos
2022-05-06 20:14 ` Maxime Devos
2022-05-06 20:23 ` Maxime Devos
2022-05-07 23:42 ` Luke Dashjr
2022-05-06 18:09 ` Maxime Devos
2022-05-06 18:23 ` bug#55273: guile-git@0.5.2 (irreproducibly?) fails to build and output is non-deterministic Maxime Devos
2022-07-12 14:08 ` Maxim Cournoyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://guix.gnu.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87edyq8luk.fsf_-_@gmail.com \
--to=maxim.cournoyer@gmail.com \
--cc=55273@debbugs.gnu.org \
--cc=luke@dashjr.org \
--cc=maximedevos@telenet.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).