From: Mark H Weaver <mhw@netris.org>
To: 33078@debbugs.gnu.org
Subject: bug#33078: Attempt to build my GuixSD system now fails
Date: Wed, 17 Oct 2018 15:42:41 -0400 [thread overview]
Message-ID: <87d0s8nyvi.fsf@netris.org> (raw)
When I try to build my x86_64 GuixSD system, based on my system
configuration which I've not modified since May, it now fails:
--8<---------------cut here---------------start------------->8---
mhw@jojen ~$ guix system build /etc/config.scm
Backtrace:
In srfi/srfi-1.scm:
592:17 19 (map1 (#<<service> type: #<service-type profile 2b09…> …))
In gnu/services.scm:
778:26 18 (loop #<<service> type: #<service-type profile 2b09d20>…>)
In srfi/srfi-1.scm:
592:17 17 (map1 (#<<service> type: #<service-type shepherd-roo…> …))
In gnu/services.scm:
778:26 16 (loop #<<service> type: #<service-type shepherd-root 2b…>)
In srfi/srfi-1.scm:
592:29 15 (map1 (#<<service> type: #<service-type file-systems…> …))
592:29 14 (map1 (#<<service> type: #<service-type root-file-sy…> …))
592:29 13 (map1 (#<<service> type: #<service-type user-process…> …))
592:29 12 (map1 (#<<service> type: #<service-type host-name 2b…> …))
592:17 11 (map1 (#<<service> type: #<service-type account 2b09…> …))
In gnu/services.scm:
778:26 10 (loop #<<service> type: #<service-type account 2b09aa0>…>)
In srfi/srfi-1.scm:
592:29 9 (map1 (#<<service> type: #<service-type guix 240fc30…> …))
592:17 8 (map1 (#<<service> type: #<service-type dbus 240f910…> …))
In gnu/services.scm:
779:26 7 (loop #<<service> type: #<service-type dbus 240f910> va…>)
In srfi/srfi-1.scm:
592:29 6 (map1 (#<<service> type: #<service-type elogind 240f…> …))
592:29 5 (map1 (#<<service> type: #<service-type polkit 240f8…> …))
592:29 4 (map1 (#<<service> type: #<service-type colord 240f1…> …))
592:29 3 (map1 (#<<service> type: #<service-type upower 240f2…> …))
592:29 2 (map1 (#<<service> type: #<service-type udisks 240f1…> …))
592:17 1 (map1 (#<<service> type: #<service-type wpa-supplica…> …))
In gnu/services/networking.scm:
1076:9 0 (config->package _)
gnu/services/networking.scm:1076:9: In procedure config->package:
Throw to key `match-error' with args `("match" "no matching pattern" #<package wpa-supplicant@2.6 gnu/packages/admin.scm:1147 3246780>)'.
mhw@jojen ~$
--8<---------------cut here---------------end--------------->8---
Here's my system configuration:
--8<---------------cut here---------------start------------->8---
;; This is an operating system configuration template
;; for a "desktop" setup with GNOME and Xfce where the
;; root partition is encrypted with LUKS.
(use-modules (gnu) (gnu system nss) (srfi srfi-1) (guix packages))
(use-service-modules base desktop networking xorg dbus)
(use-package-modules certs gnome cryptsetup linux admin guile firmware xdisorg libusb suckless)
(define keymap
(plain-file
"keymap"
"keymaps 0-255
keycode 42 = Shift
keycode 54 = Shift
keycode 29 = Control
keycode 58 = Control
keycode 56 = Alt
keycode 100 = Alt
alt shift keycode 1 = Meta_Escape
alt shift keycode 2 = Meta_exclam
alt shift keycode 3 = Meta_at
alt shift keycode 4 = Meta_numbersign
alt shift keycode 5 = Meta_dollar
alt shift keycode 6 = Meta_percent
alt shift keycode 7 = Meta_asciicircum
shift control keycode 7 = Control_asciicircum
control alt keycode 7 = Meta_Control_asciicircum
shift control alt keycode 7 = Meta_Control_asciicircum
alt shift keycode 8 = Meta_ampersand
alt shift keycode 9 = Meta_asterisk
alt shift keycode 10 = Meta_parenleft
alt shift keycode 11 = Meta_parenright
alt shift keycode 12 = Meta_underscore
shift control keycode 12 = Control_underscore
control alt keycode 12 = Meta_Control_underscore
shift control alt keycode 12 = Meta_Control_underscore
alt shift keycode 13 = Meta_plus
alt shift keycode 14 = Meta_Delete
alt shift keycode 15 = Meta_Tab
alt shift keycode 16 = Meta_Q
alt shift keycode 17 = Meta_W
alt shift keycode 18 = Meta_E
alt shift keycode 19 = Meta_R
alt shift keycode 20 = Meta_T
alt shift keycode 21 = Meta_Y
alt shift keycode 22 = Meta_U
alt shift keycode 23 = Meta_I
alt shift keycode 24 = Meta_O
alt shift keycode 25 = Meta_P
alt shift keycode 26 = Meta_braceleft
control alt keycode 26 = Meta_Escape
alt shift keycode 27 = Meta_braceright
control alt keycode 27 = Meta_Control_bracketright
alt shift keycode 28 = Meta_Control_m
alt shift keycode 29 = Meta_Control
alt shift keycode 30 = Meta_A
alt shift keycode 31 = Meta_S
alt shift keycode 32 = Meta_D
alt shift keycode 33 = Meta_F
alt shift keycode 34 = Meta_G
alt shift keycode 35 = Meta_H
alt shift keycode 36 = Meta_J
alt shift keycode 37 = Meta_K
alt shift keycode 38 = Meta_L
alt shift keycode 39 = Meta_colon
alt shift keycode 40 = Meta_quotedbl
alt shift keycode 41 = Meta_asciitilde
alt shift keycode 43 = Meta_bar
control alt keycode 43 = Meta_Control_backslash
alt shift keycode 44 = Meta_Z
alt shift keycode 45 = Meta_X
alt shift keycode 46 = Meta_C
alt shift keycode 47 = Meta_V
alt shift keycode 48 = Meta_B
alt shift keycode 49 = Meta_N
alt shift keycode 50 = Meta_M
alt shift keycode 51 = Meta_less
alt shift keycode 52 = Meta_greater
alt shift keycode 53 = Meta_question
alt shift keycode 57 = Meta_space
"))
(operating-system
(host-name "jojen")
(timezone "US/Eastern")
(locale "en_US.utf8")
(bootloader (bootloader-configuration
(bootloader grub-bootloader)
(target "/dev/sda")))
(kernel linux-libre)
;;(firmware (list ath9k-htc-firmware))
(firmware '())
;; Specify a mapped device for the encrypted root partition.
;; The UUID is that returned by 'cryptsetup luksUUID'.
(mapped-devices
(list (mapped-device
(source (uuid "a56c53e7-b345-4e24-a17b-6cf158dbc7d3"))
(target "jojen-root")
(type luks-device-mapping))))
(file-systems (cons* (file-system
;; FIXME: reference by the file system label?
(device "/dev/mapper/jojen-root")
(mount-point "/")
(type "btrfs")
(dependencies mapped-devices))
%base-file-systems))
(users (cons* (user-account
(name "mhw")
(uid 1000)
(group "mhw")
(supplementary-groups '("wheel" "users" "netdev"
"audio" "video" "dialout"))
(home-directory "/home/mhw"))
%base-user-accounts))
(groups (cons* (user-group
(name "mhw")
(id 1000))
%base-groups))
(setuid-programs
(list (file-append shadow "/bin/passwd")
(file-append inetutils "/bin/ping")))
;; This is where we specify system-wide packages.
(packages (cons* nss-certs ;for HTTPS access
gvfs ;for user mounts
cryptsetup
btrfs-progs
wpa-supplicant
network-manager
network-manager-applet
(delete sudo %base-packages)))
(services (cons* (console-keymap-service keymap)
;;(xfce-desktop-service)
(gnome-desktop-service)
(service network-manager-service-type
(network-manager-configuration))
(service wpa-supplicant-service-type wpa-supplicant)
;; Desktop services follow
(slim-service)
(screen-locker-service slock)
;;(screen-locker-service xlockmore "xlock")
(simple-service 'mtp udev-service-type (list libmtp))
;;(avahi-service) ; I don't trust this
;;(wicd-service) ; using NetworkManager instead
(udisks-service)
(upower-service)
(colord-service)
;;(geoclue-service) ; I don't want this
(polkit-service)
(elogind-service)
(dbus-service)
;;(ntp-service) ; I don't trust this
(modify-services (remove (lambda (svc)
(eq? (service-kind svc)
wicd-service-type))
%base-services)
;; This is for debugging
#;
(nscd-service-type config =>
(nscd-configuration
(inherit config)
(debug-level 3)
(log-file "/var/log/nscd.log")))
;; I don't trust the build farm
(guix-service-type config =>
(guix-configuration
(inherit config)
(use-substitutes? #f)
(authorized-keys '())
(substitute-urls '())
(extra-options '("--gc-keep-derivations=yes"
"--gc-keep-outputs=yes")))))))
;; Allow resolution of '.local' host names with mDNS.
;;(name-service-switch %mdns-host-lookup-nss) ; disabled for now
)
--8<---------------cut here---------------end--------------->8---
Mark
next reply other threads:[~2018-10-17 19:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-17 19:42 Mark H Weaver [this message]
2018-10-17 19:51 ` bug#33078: Attempt to build my GuixSD system now fails Mark H Weaver
2018-10-17 20:50 ` Marius Bakke
2018-10-17 21:49 ` Marius Bakke
2018-10-19 14:00 ` Ludovic Courtès
2018-11-07 21:41 ` Ludovic Courtès
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://guix.gnu.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d0s8nyvi.fsf@netris.org \
--to=mhw@netris.org \
--cc=33078@debbugs.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).