* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
@ 2019-09-14 7:53 Vivien Kraus
2019-09-14 11:16 ` P via Bug reports for GNU Guix
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Vivien Kraus @ 2019-09-14 7:53 UTC (permalink / raw)
To: 37403
Hello guix,
Trying to run 'guix build --target=x86_64-w64-mingw32 perl' results in
the following exception in the latest stages of the build:
phase `install' succeeded after 36.7 seconds
starting phase `remove-extra-references'
Backtrace:
13 (primitive-load "/gnu/store/qnavzfxvw5rng7z8rzlx9zw0ji9…")
In ice-9/eval.scm:
191:35 12 (_ _)
In srfi/srfi-1.scm:
863:16 11 (every1 #<procedure 61edc0 at /gnu/store/gfprsx2m62cvq…> …)
In /gnu/store/gfprsx2m62cvqbh7ysc9ay9slhijvmal-module-import/guix/build/gnu-build-system.scm:
799:28 10 (_ _)
In ice-9/eval.scm:
619:8 9 (_ #(#(#(#(#(#(#<directory (guile-user)…>) …) …) …) …) …))
In ice-9/boot-9.scm:
841:4 8 (with-throw-handler _ _ _)
In ice-9/ports.scm:
444:17 7 (call-with-input-file _ _ #:binary _ #:encoding _ # _)
In /gnu/store/gfprsx2m62cvqbh7ysc9ay9slhijvmal-module-import/guix/build/utils.scm:
641:26 6 (_ _)
667:26 5 (_ #<input: /gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssq…> …)
In srfi/srfi-1.scm:
466:18 4 (fold #<procedure 7ffff5d2b0c0 at /gnu/store/gfprsx2m6…> …)
In ice-9/eval.scm:
202:51 3 (_ #(#(#(#(#(#(#<directory (guile-user)…> …)) …) …) …) …))
163:9 2 (_ #(#(#(#(#(#(#<directory (guile-user)…> …)) …) …) …) …))
In unknown file:
1 (string-append "incpth='" #f "/include'\n")
In ice-9/boot-9.scm:
752:25 0 (dispatch-exception _ _ _)
ice-9/boot-9.scm:752:25: In procedure dispatch-exception:
In procedure string-append: Wrong type (expecting string): #f
builder for
`/gnu/store/2khcqc5rpc0wizhihpq69x6qn3f7nw5l-perl-5.28.0.drv' failed
with exit code 1
I have the full log. Do you wish to see it?
Did I do something wrong? Is it the same for you? Is there a
workaround?
Best regards,
Vivien
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 7:53 bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl' Vivien Kraus
@ 2019-09-14 11:16 ` P via Bug reports for GNU Guix
2019-09-14 11:28 ` Vivien Kraus
2019-09-14 11:59 ` Danny Milosavljevic
2019-09-14 13:16 ` Jan Nieuwenhuizen
2 siblings, 1 reply; 10+ messages in thread
From: P via Bug reports for GNU Guix @ 2019-09-14 11:16 UTC (permalink / raw)
To: Vivien Kraus; +Cc: 37403@debbugs.gnu.org
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Saturday, September 14, 2019 7:53 AM, Vivien Kraus <vivien@planete-kraus.eu> wrote:
> Hello guix,
>
> Trying to run 'guix build --target=x86_64-w64-mingw32 perl' results in
> the following exception in the latest stages of the build:
>
> phase `install' succeeded after 36.7 seconds starting phase`remove-extra-references'
> Backtrace:
> 13 (primitive-load "/gnu/store/qnavzfxvw5rng7z8rzlx9zw0ji9…")
> In ice-9/eval.scm:
> 191:35 12 (_ _)
> In srfi/srfi-1.scm:
> 863:16 11 (every1 #<procedure 61edc0 at /gnu/store/gfprsx2m62cvq…> …)
> In /gnu/store/gfprsx2m62cvqbh7ysc9ay9slhijvmal-module-import/guix/build/gnu-build-system.scm:
> 799:28 10 (_ )
> In ice-9/eval.scm:
> 619:8 9 ( #(#(#(#(#(#(#<directory (guile-user)…>) …) …) …) …) …))In ice-9/boot-9.scm:
> 841:4 8 (with-throw-handler _ _ _)
> In ice-9/ports.scm:
> 444:17 7 (call-with-input-file _ _ #:binary _ #:encoding _ # )
> In /gnu/store/gfprsx2m62cvqbh7ysc9ay9slhijvmal-module-import/guix/build/utils.scm:
> 641:26 6 ( )
> 667:26 5 ( #<input: /gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssq…> …)In srfi/srfi-1.scm:
> 466:18 4 (fold #<procedure 7ffff5d2b0c0 at /gnu/store/gfprsx2m6…> …)
> In ice-9/eval.scm:
> 202:51 3 (_ #(#(#(#(#(#(#<directory (guile-user)…> …)) …) …) …) …))
>
> 163:9 2 (_ #(#(#(#(#(#(#<directory (guile-user)…> …)) …) …) …) …))
>
>
> In unknown file:
> 1 (string-append "incpth='" #f "/include'\n")
> In ice-9/boot-9.scm:
> 752:25 0 (dispatch-exception _ _ _)
>
> ice-9/boot-9.scm:752:25: In procedure dispatch-exception:
> In procedure string-append: Wrong type (expecting string): #f
> builder for
> `/gnu/store/2khcqc5rpc0wizhihpq69x6qn3f7nw5l-perl-5.28.0.drv' failed
> with exit code 1
>
> I have the full log. Do you wish to see it?
>
> Did I do something wrong? Is it the same for you? Is there a
> workaround?
>
> Best regards,
>
> Vivien
Seems like cross compiling with mingw is broken for other packages too, I tried the guile example about a week ago and also Lua (which is a super portable language, so it should work everywhere, usually without modifications) and neither worked.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 11:16 ` P via Bug reports for GNU Guix
@ 2019-09-14 11:28 ` Vivien Kraus
0 siblings, 0 replies; 10+ messages in thread
From: Vivien Kraus @ 2019-09-14 11:28 UTC (permalink / raw)
To: P; +Cc: 37403@debbugs.gnu.org
P writes:
> Seems like cross compiling with mingw is broken for other packages too, I tried the guile example about a week ago and also Lua (which is a super portable language, so it should work everywhere, usually without modifications) and neither worked.
Oops. I was hoping I could build my Gtk+ application with guix,
and thus get rid of the Fedora container.
This bug is so depressing though: perl builds just fine, installs just
fine, but guix fails at the very end, in the 'remove-extra-references' step.
Vivien
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 7:53 bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl' Vivien Kraus
2019-09-14 11:16 ` P via Bug reports for GNU Guix
@ 2019-09-14 11:59 ` Danny Milosavljevic
2019-09-14 12:23 ` Danny Milosavljevic
2019-09-14 13:16 ` Jan Nieuwenhuizen
2 siblings, 1 reply; 10+ messages in thread
From: Danny Milosavljevic @ 2019-09-14 11:59 UTC (permalink / raw)
To: Vivien Kraus; +Cc: 37403
[-- Attachment #1: Type: text/plain, Size: 373 bytes --]
Looking at the source code of phase "remove-extra-references" and assuming that
the "out" output exists, probably the "libc" input doesn't exist.
set-cross-path/mingw guards against this case, so apparently it is normal that
"libc" input can be missing and perl should be guarding against it, but doesn't.
Otherwise I don't know mingw, so can't help much further.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 11:59 ` Danny Milosavljevic
@ 2019-09-14 12:23 ` Danny Milosavljevic
2019-09-14 17:24 ` Vivien Kraus
0 siblings, 1 reply; 10+ messages in thread
From: Danny Milosavljevic @ 2019-09-14 12:23 UTC (permalink / raw)
To: Vivien Kraus; +Cc: 37403
[-- Attachment #1: Type: text/plain, Size: 1241 bytes --]
Further information:
According to gnu/packages/cross-base.scm, cross-gcc contains either "libc" or
"mingw-source" in the mingw case--I don't know why, but that's what it says.
The purpose of "remove-extra-references" seems to be to shrink the
number of recorded dependencies, so maybe compare it with the unshrinked
list of dependencies by printing the latter out (apparently it should be
inside Config_heavy.pl and Config.pm in the temporary build
directory--could you post those?).
I tried it myself (with mingw target) and I got:
loclibpth='/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
Hmm.
Also, perl seems to fetch libc from the %build-inputs just fine earlier.
So try putting (assoc-ref native-inputs "libc") instead of
(assoc-ref inputs "libc") in the perl package definition (make sure to
accept native-inputs in the function in the first place) in order to debug
the problem (or maybe (assoc-ref inputs "mingw-source")).
When cross compiling it's important to get right which parts you get
from the host libs and which from the target libs, maybe that's messed
up there.
Also possible would be not to do that shrinking if libc is unavailable,
but not sure whether we want that.
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 7:53 bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl' Vivien Kraus
2019-09-14 11:16 ` P via Bug reports for GNU Guix
2019-09-14 11:59 ` Danny Milosavljevic
@ 2019-09-14 13:16 ` Jan Nieuwenhuizen
2019-09-14 17:25 ` Vivien Kraus
2 siblings, 1 reply; 10+ messages in thread
From: Jan Nieuwenhuizen @ 2019-09-14 13:16 UTC (permalink / raw)
To: Vivien Kraus; +Cc: 37403
Vivien Kraus writes:
> Trying to run 'guix build --target=x86_64-w64-mingw32 perl' results in
> the following exception in the latest stages of the build:
Are you using the core-updates-next branch? It has a many
cross-compilation fixes, notably
https://git.savannah.gnu.org/cgit/guix.git/commit/?h=core-updates-next&id=659a2d0f4fff889dff902e32b569e4ca0ae5384a
Greetings,
janneke
--
Jan Nieuwenhuizen <janneke@gnu.org> | GNU LilyPond http://lilypond.org
Freelance IT http://JoyofSource.com | Avatar® http://AvatarAcademy.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 12:23 ` Danny Milosavljevic
@ 2019-09-14 17:24 ` Vivien Kraus
0 siblings, 0 replies; 10+ messages in thread
From: Vivien Kraus @ 2019-09-14 17:24 UTC (permalink / raw)
To: Danny Milosavljevic; +Cc: 37403
[-- Attachment #1: Type: text/plain, Size: 648 bytes --]
Hello,
Danny Milosavljevic writes:
> The purpose of "remove-extra-references" seems to be to shrink the
> number of recorded dependencies, so maybe compare it with the unshrinked
> list of dependencies by printing the latter out (apparently it should be
> inside Config_heavy.pl and Config.pm in the temporary build
> directory--could you post those?).
I have several Config.pm files:
./lib/perl5/5.28.0/Net/Config.pm
./lib/perl5/5.28.0/ExtUtils/MakeMaker/Config.pm
./lib/perl5/5.28.0/x86_64-linux-thread-multi/Config.pm
./lib/perl5/5.28.0/x86_64-linux-thread-multi/Encode/Config.pm
In doubt I attach all four, plus the Config_heavy one :)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: File lib/perl5/5.28.0/x86_64-linux-thread-multi/Config_heavy.pl --]
[-- Type: text/x-perl, Size: 54615 bytes --]
# This file was created by configpm when Perl was built. Any changes
# made to this file will be lost the next time perl is built.
package Config;
use strict;
use warnings;
our %Config;
sub bincompat_options {
return split ' ', (Internals::V())[0];
}
sub non_bincompat_options {
return split ' ', (Internals::V())[1];
}
sub compile_date {
return (Internals::V())[2]
}
sub local_patches {
my (undef, undef, undef, @patches) = Internals::V();
return @patches;
}
sub _V {
die "Perl lib was built for 'linux' but is being run on '$^O'"
unless "linux" eq $^O;
my ($bincompat, $non_bincompat, $date, @patches) = Internals::V();
my @opts = sort split ' ', "$bincompat $non_bincompat";
print Config::myconfig();
print "\nCharacteristics of this binary (from libperl): \n";
print " Compile-time options:\n";
print " $_\n" for @opts;
if (@patches) {
print " Locally applied patches:\n";
print " $_\n" foreach @patches;
}
print " Built under linux\n";
print " $date\n" if defined $date;
my @env = map { "$_=\"$ENV{$_}\"" } sort grep {/^PERL/} keys %ENV;
if (@env) {
print " \%ENV:\n";
print " $_\n" foreach @env;
}
print " \@INC:\n";
print " $_\n" foreach @INC;
}
sub header_files {
return qw(EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h
dosish.h embed.h embedvar.h form.h gv.h handy.h hv.h hv_func.h
intrpvar.h iperlsys.h keywords.h mg.h nostdio.h op.h opcode.h
pad.h parser.h patchlevel.h perl.h perlio.h perliol.h perlsdio.h
perlvars.h perly.h pp.h pp_proto.h proto.h regcomp.h regexp.h
regnodes.h scope.h sv.h thread.h time64.h unixish.h utf8.h
util.h);
}
##!/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/sh
##
## This file was produced by running the Configure script. It holds all the
## definitions figured out by Configure. Should you modify one of these values,
## do not forget to propagate your changes by running "Configure -der". You may
## instead choose to run each of the .SH files by yourself, or "Configure -S".
##
#
## Package name : perl5
## Source directory : .
## Configuration time: 1970-01-01
## Configured by : guix
## Target system : linux
#
#: Configure command line arguments.
#
#: Variables propagated from previous config.sh file.
our $summary = <<'!END!';
Summary of my $package (revision $revision $version_patchlevel_string) configuration:
$git_commit_id_title $git_commit_id$git_ancestor_line
Platform:
osname=$osname
osvers=$osvers
archname=$archname
uname='$myuname'
config_args='$config_args'
hint=$hint
useposix=$useposix
d_sigaction=$d_sigaction
useithreads=$useithreads
usemultiplicity=$usemultiplicity
use64bitint=$use64bitint
use64bitall=$use64bitall
uselongdouble=$uselongdouble
usemymalloc=$usemymalloc
default_inc_excludes_dot=$default_inc_excludes_dot
bincompat5005=undef
Compiler:
cc='$cc'
ccflags ='$ccflags'
optimize='$optimize'
cppflags='$cppflags'
ccversion='$ccversion'
gccversion='$gccversion'
gccosandvers='$gccosandvers'
intsize=$intsize
longsize=$longsize
ptrsize=$ptrsize
doublesize=$doublesize
byteorder=$byteorder
doublekind=$doublekind
d_longlong=$d_longlong
longlongsize=$longlongsize
d_longdbl=$d_longdbl
longdblsize=$longdblsize
longdblkind=$longdblkind
ivtype='$ivtype'
ivsize=$ivsize
nvtype='$nvtype'
nvsize=$nvsize
Off_t='$lseektype'
lseeksize=$lseeksize
alignbytes=$alignbytes
prototype=$prototype
Linker and Libraries:
ld='$ld'
ldflags ='$ldflags'
libpth=$libpth
libs=$libs
perllibs=$perllibs
libc=$libc
so=$so
useshrplib=$useshrplib
libperl=$libperl
gnulibc_version='$gnulibc_version'
Dynamic Linking:
dlsrc=$dlsrc
dlext=$dlext
d_dlsymun=$d_dlsymun
ccdlflags='$ccdlflags'
cccdlflags='$cccdlflags'
lddlflags='$lddlflags'
!END!
my $summary_expanded;
sub myconfig {
return $summary_expanded if $summary_expanded;
($summary_expanded = $summary) =~ s{\$(\w+)}
{
my $c;
if ($1 eq 'git_ancestor_line') {
if ($Config::Config{git_ancestor}) {
$c= "\n Ancestor: $Config::Config{git_ancestor}";
} else {
$c= "";
}
} else {
$c = $Config::Config{$1};
}
defined($c) ? $c : 'undef'
}ge;
$summary_expanded;
}
local *_ = \my $a;
$_ = <<'!END!';
Author=''
CONFIG='true'
Date=''
Header=''
Id=''
Locker=''
Log=''
PATCHLEVEL='28'
PERL_API_REVISION='5'
PERL_API_SUBVERSION='0'
PERL_API_VERSION='28'
PERL_CONFIG_SH='true'
PERL_PATCHLEVEL=''
PERL_REVISION='5'
PERL_SUBVERSION='0'
PERL_VERSION='28'
RCSfile=''
Revision=''
SUBVERSION='0'
Source=''
State=''
_a='.a'
_exe=''
_o='.o'
afs='false'
afsroot='/afs'
alignbytes='8'
aphostname='/gnu/store/5s2nib1lrd2101bbrivcl17kjx1mspw6-coreutils-8.30/bin/uname -n'
api_revision='5'
api_subversion='0'
api_version='28'
api_versionstring='5.28.0'
ar='ar'
archlib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi'
archlibexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi'
archname='x86_64-linux-thread-multi'
archname64=''
archobjs=''
asctime_r_proto='REENTRANT_PROTO_B_SB'
awk='awk'
baserev='5.0'
bash=''
bin='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
bin_ELF='define'
binexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
bison='bison'
byacc='byacc'
byteorder='12345678'
c=''
castflags='0'
cat='cat'
cc='gcc'
cccdlflags='-fPIC'
ccdlflags='-Wl,-E -Wl,-rpath,/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi/CORE'
ccflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=2'
ccflags_uselargefiles='-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64'
ccname='gcc'
ccsymbols=''
ccversion=''
cf_by='guix'
cf_email='guix@localhost.nonet'
cf_time='1970-01-01'
charbits='8'
charsize='1'
chgrp=''
chmod='chmod'
chown=''
clocktype='clock_t'
comm='comm'
compress=''
config_arg0='./Configure'
config_arg1='-Dprefix=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
config_arg10='-Dloclibpth=/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
config_arg11='-Dusethreads'
config_arg2='-Dman1dir=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
config_arg3='-Dman3dir=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
config_arg4='-de'
config_arg5='-Dcc=gcc'
config_arg6='-Uinstallusrbinperl'
config_arg7='-Dinstallstyle=lib/perl5'
config_arg8='-Duseshrplib'
config_arg9='-Dlocincpth=/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include'
config_argc='11'
config_args='-Dprefix=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0 -Dman1dir=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1 -Dman3dir=/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3 -de -Dcc=gcc -Uinstallusrbinperl -Dinstallstyle=lib/perl5 -Duseshrplib -Dlocincpth=/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include -Dloclibpth=/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib -Dusethreads'
contains='grep'
cp='cp'
cpio=''
cpp='cpp'
cpp_stuff='42'
cppccsymbols=''
cppflags='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include'
cpplast='-'
cppminus='-'
cpprun='gcc -E'
cppstdin='gcc -E'
cppsymbols='__amd64=1 __amd64__=1 __ATOMIC_ACQ_REL=4 __ATOMIC_ACQUIRE=2 __ATOMIC_CONSUME=1 __ATOMIC_HLE_ACQUIRE=65536 __ATOMIC_HLE_RELEASE=131072 __ATOMIC_RELAXED=0 __ATOMIC_RELEASE=3 __ATOMIC_SEQ_CST=5 __BIGGEST_ALIGNMENT__=16 __BYTE_ORDER__=1234 __CHAR16_TYPE__=short\ unsigned\ int __CHAR32_TYPE__=unsigned\ int __CHAR_BIT__=8 __code_model_small__=1 __DBL_DECIMAL_DIG__=17 __DBL_DENORM_MIN__=((double)4.94065645841246544177e-324L) __DBL_DIG__=15 __DBL_EPSILON__=((double)2.22044604925031308085e-16L) __DBL_HAS_DENORM__=1 __DBL_HAS_INFINITY__=1 __DBL_HAS_QUIET_NAN__=1 __DBL_MANT_DIG__=53 __DBL_MAX_10_EXP__=308 __DBL_MAX__=((double)1.79769313486231570815e+308L) __DBL_MAX_EXP__=1024 __DBL_MIN_10_EXP__=(-307) __DBL_MIN__=((double)2.22507385850720138309e-308L) __DBL_MIN_EXP__=(-1021) __DEC128_EPSILON__=1E-33DL __DEC128_MANT_DIG__=34 __DEC128_MAX__=9.999999999999999999999999999999999E6144DL __DEC128_MAX_EXP__=6145 __DEC128_MIN__=1E-6143DL __DEC128_MIN_EXP__=(-6142) __DEC128_SUBNORMAL_MIN__=0.000000000000000000000000000000001E-6143DL __DEC32_EPSILON__=1E-6DF __DEC32_MANT_DIG__=7 __DEC32_MAX__=9.999999E96DF __DEC32_MAX_EXP__=97 __DEC32_MIN__=1E-95DF __DEC32_MIN_EXP__=(-94) __DEC32_SUBNORMAL_MIN__=0.000001E-95DF __DEC64_EPSILON__=1E-15DD __DEC64_MANT_DIG__=16 __DEC64_MAX__=9.999999999999999E384DD __DEC64_MAX_EXP__=385 __DEC64_MIN__=1E-383DD __DEC64_MIN_EXP__=(-382) __DEC64_SUBNORMAL_MIN__=0.000000000000001E-383DD __DEC_EVAL_METHOD__=2 __DECIMAL_BID_FORMAT__=1 __DECIMAL_DIG__=21 __ELF__=1 _FILE_OFFSET_BITS=64 __FINITE_MATH_ONLY__=0 __FLOAT_WORD_ORDER__=1234 __FLT_DECIMAL_DIG__=9 __FLT_DENORM_MIN__=1.40129846432481707092e-45F __FLT_DIG__=6 __FLT_EPSILON__=1.19209289550781250000e-7F __FLT_EVAL_METHOD__=0 __FLT_HAS_DENORM__=1 __FLT_HAS_INFINITY__=1 __FLT_HAS_QUIET_NAN__=1 __FLT_MANT_DIG__=24 __FLT_MAX_10_EXP__=38 __FLT_MAX__=3.40282346638528859812e+38F __FLT_MAX_EXP__=128 __FLT_MIN_10_EXP__=(-37) __FLT_MIN__=1.17549435082228750797e-38F __FLT_MIN_EXP__=(-125) __FLT_RADIX__=2 __FXSR__=1 __GCC_ATOMIC_BOOL_LOCK_FREE=2 __GCC_ATOMIC_CHAR16_T_LOCK_FREE=2 __GCC_ATOMIC_CHAR32_T_LOCK_FREE=2 __GCC_ATOMIC_CHAR_LOCK_FREE=2 __GCC_ATOMIC_INT_LOCK_FREE=2 __GCC_ATOMIC_LLONG_LOCK_FREE=2 __GCC_ATOMIC_LONG_LOCK_FREE=2 __GCC_ATOMIC_POINTER_LOCK_FREE=2 __GCC_ATOMIC_SHORT_LOCK_FREE=2 __GCC_ATOMIC_TEST_AND_SET_TRUEVAL=1 __GCC_ATOMIC_WCHAR_T_LOCK_FREE=2 __GCC_HAVE_DWARF2_CFI_ASM=1 __GCC_HAVE_SYNC_COMPARE_AND_SWAP_1=1 __GCC_HAVE_SYNC_COMPARE_AND_SWAP_2=1 __GCC_HAVE_SYNC_COMPARE_AND_SWAP_4=1 __GCC_HAVE_SYNC_COMPARE_AND_SWAP_8=1 __GCC_IEC_559=2 __GCC_IEC_559_COMPLEX=2 __GLIBC__=2 __GLIBC_MINOR__=28 __GNUC__=5 __GNUC_MINOR__=5 __GNUC_PATCHLEVEL__=0 __GNUC_STDC_INLINE__=1 __GNU_LIBRARY__=6 __gnu_linux__=1 _GNU_SOURCE=1 __GXX_ABI_VERSION=1009 __has_include=__has_include __has_include_next=__has_include_next __INT16_C=__INT16_C __INT16_MAX__=0x7fff __INT16_TYPE__=short\ int __INT32_C=__INT32_C __INT32_MAX__=0x7fffffff __INT32_TYPE__=int __INT64_C=__INT64_C __INT64_MAX__=0x7fffffffffffffffL __INT64_TYPE__=long\ int __INT8_C=__INT8_C __INT8_MAX__=0x7f __INT8_TYPE__=signed\ char __INT_FAST16_MAX__=0x7fffffffffffffffL __INT_FAST16_TYPE__=long\ int __INT_FAST32_MAX__=0x7fffffffffffffffL __INT_FAST32_TYPE__=long\ int __INT_FAST64_MAX__=0x7fffffffffffffffL __INT_FAST64_TYPE__=long\ int __INT_FAST8_MAX__=0x7f __INT_FAST8_TYPE__=signed\ char __INT_LEAST16_MAX__=0x7fff __INT_LEAST16_TYPE__=short\ int __INT_LEAST32_MAX__=0x7fffffff __INT_LEAST32_TYPE__=int __INT_LEAST64_MAX__=0x7fffffffffffffffL __INT_LEAST64_TYPE__=long\ int __INT_LEAST8_MAX__=0x7f __INT_LEAST8_TYPE__=signed\ char __INT_MAX__=0x7fffffff __INTMAX_C=__INTMAX_C __INTMAX_MAX__=0x7fffffffffffffffL __INTMAX_TYPE__=long\ int __INTPTR_MAX__=0x7fffffffffffffffL __INTPTR_TYPE__=long\ int __k8=1 __k8__=1 _LARGEFILE64_SOURCE=1 _LARGEFILE_SOURCE=1 __LDBL_DENORM_MIN__=3.64519953188247460253e-4951L __LDBL_DIG__=18 __LDBL_EPSILON__=1.08420217248550443401e-19L __LDBL_HAS_DENORM__=1 __LDBL_HAS_INFINITY__=1 __LDBL_HAS_QUIET_NAN__=1 __LDBL_MANT_DIG__=64 __LDBL_MAX_10_EXP__=4932 __LDBL_MAX__=1.18973149535723176502e+4932L __LDBL_MAX_EXP__=16384 __LDBL_MIN_10_EXP__=(-4931) __LDBL_MIN__=3.36210314311209350626e-4932L __LDBL_MIN_EXP__=(-16381) __linux=1 __linux__=1 linux=1 __LONG_LONG_MAX__=0x7fffffffffffffffLL __LONG_MAX__=0x7fffffffffffffffL __LP64__=1 _LP64=1 __MMX__=1 __ORDER_BIG_ENDIAN__=4321 __ORDER_LITTLE_ENDIAN__=1234 __ORDER_PDP_ENDIAN__=3412 _POSIX_C_SOURCE=200809L _POSIX_SOURCE=1 __PRAGMA_REDEFINE_EXTNAME=1 __PTRDIFF_MAX__=0x7fffffffffffffffL __PTRDIFF_TYPE__=long\ int _REENTRANT=1 __REGISTER_PREFIX__= __SCHAR_MAX__=0x7f __SHRT_MAX__=0x7fff __SIG_ATOMIC_MAX__=0x7fffffff __SIG_ATOMIC_MIN__=(-0x7fffffff\ -\ 1) __SIG_ATOMIC_TYPE__=int __SIZE_MAX__=0xffffffffffffffffUL __SIZEOF_DOUBLE__=8 __SIZEOF_FLOAT128__=16 __SIZEOF_FLOAT__=4 __SIZEOF_FLOAT80__=16 __SIZEOF_INT128__=16 __SIZEOF_INT__=4 __SIZEOF_LONG__=8 __SIZEOF_LONG_DOUBLE__=16 __SIZEOF_LONG_LONG__=8 __SIZEOF_POINTER__=8 __SIZEOF_PTRDIFF_T__=8 __SIZEOF_SHORT__=2 __SIZEOF_SIZE_T__=8 __SIZEOF_WCHAR_T__=4 __SIZEOF_WINT_T__=4 __SIZE_TYPE__=long\ unsigned\ int __SSE__=1 __SSE2__=1 __SSE2_MATH__=1 __SSE_MATH__=1 __STDC__=1 __STDC_HOSTED__=1 __STDC_IEC_559__=1 __STDC_IEC_559_COMPLEX__=1 __STDC_ISO_10646__=201706L _STDC_PREDEF_H=1 __STDC_UTF_16__=1 __STDC_UTF_32__=1 __STDC_VERSION__=201112L __UINT16_C=__UINT16_C __UINT16_MAX__=0xffff __UINT16_TYPE__=short\ unsigned\ int __UINT32_C=__UINT32_C __UINT32_MAX__=0xffffffffU __UINT32_TYPE__=unsigned\ int __UINT64_C=__UINT64_C __UINT64_MAX__=0xffffffffffffffffUL __UINT64_TYPE__=long\ unsigned\ int __UINT8_C=__UINT8_C __UINT8_MAX__=0xff __UINT8_TYPE__=unsigned\ char __UINT_FAST16_MAX__=0xffffffffffffffffUL __UINT_FAST16_TYPE__=long\ unsigned\ int __UINT_FAST32_MAX__=0xffffffffffffffffUL __UINT_FAST32_TYPE__=long\ unsigned\ int __UINT_FAST64_MAX__=0xffffffffffffffffUL __UINT_FAST64_TYPE__=long\ unsigned\ int __UINT_FAST8_MAX__=0xff __UINT_FAST8_TYPE__=unsigned\ char __UINT_LEAST16_MAX__=0xffff __UINT_LEAST16_TYPE__=short\ unsigned\ int __UINT_LEAST32_MAX__=0xffffffffU __UINT_LEAST32_TYPE__=unsigned\ int __UINT_LEAST64_MAX__=0xffffffffffffffffUL __UINT_LEAST64_TYPE__=long\ unsigned\ int __UINT_LEAST8_MAX__=0xff __UINT_LEAST8_TYPE__=unsigned\ char __UINTMAX_C=__UINTMAX_C __UINTMAX_MAX__=0xffffffffffffffffUL __UINTMAX_TYPE__=long\ unsigned\ int __UINTPTR_MAX__=0xffffffffffffffffUL __UINTPTR_TYPE__=long\ unsigned\ int __unix=1 __unix__=1 unix=1 __USE_FILE_OFFSET64=1 __USE_GNU=1 __USE_LARGEFILE=1 __USE_LARGEFILE64=1 __USE_MISC=1 __USE_POSIX=1 __USE_POSIX199309=1 __USE_POSIX199506=1 __USE_POSIX2=1 __USER_LABEL_PREFIX__= __USE_UNIX98=1 __USE_XOPEN=1 __USE_XOPEN_EXTENDED=1 __VERSION__="5.5.0" __WCHAR_MAX__=0x7fffffff __WCHAR_MIN__=(-0x7fffffff\ -\ 1) __WCHAR_TYPE__=int __WINT_MAX__=0xffffffffU __WINT_MIN__=0U __WINT_TYPE__=unsigned\ int __x86_64=1 __x86_64__=1 _XOPEN_SOURCE=700 _XOPEN_SOURCE_EXTENDED=1'
crypt_r_proto='REENTRANT_PROTO_B_CCS'
cryptlib=''
csh='csh'
ctermid_r_proto='0'
ctime_r_proto='REENTRANT_PROTO_B_SB'
d_Gconvert='gcvt((x),(n),(b))'
d_PRIEUldbl='define'
d_PRIFUldbl='define'
d_PRIGUldbl='define'
d_PRIXU64='define'
d_PRId64='define'
d_PRIeldbl='define'
d_PRIfldbl='define'
d_PRIgldbl='define'
d_PRIi64='define'
d_PRIo64='define'
d_PRIu64='define'
d_PRIx64='define'
d_SCNfldbl='define'
d__fwalk='undef'
d_accept4='define'
d_access='define'
d_accessx='undef'
d_acosh='define'
d_aintl='undef'
d_alarm='define'
d_archlib='define'
d_asctime64='undef'
d_asctime_r='define'
d_asinh='define'
d_atanh='define'
d_atolf='undef'
d_atoll='define'
d_attribute_deprecated='define'
d_attribute_format='define'
d_attribute_malloc='define'
d_attribute_nonnull='define'
d_attribute_noreturn='define'
d_attribute_pure='define'
d_attribute_unused='define'
d_attribute_warn_unused_result='define'
d_backtrace='define'
d_bsd='undef'
d_bsdgetpgrp='undef'
d_bsdsetpgrp='undef'
d_builtin_add_overflow='define'
d_builtin_choose_expr='define'
d_builtin_expect='define'
d_builtin_mul_overflow='define'
d_builtin_sub_overflow='define'
d_c99_variadic_macros='define'
d_casti32='undef'
d_castneg='define'
d_cbrt='define'
d_chown='define'
d_chroot='define'
d_chsize='undef'
d_class='undef'
d_clearenv='define'
d_closedir='define'
d_cmsghdr_s='define'
d_const='define'
d_copysign='define'
d_copysignl='define'
d_cplusplus='undef'
d_crypt='define'
d_crypt_r='define'
d_csh='undef'
d_ctermid='define'
d_ctermid_r='undef'
d_ctime64='undef'
d_ctime_r='define'
d_cuserid='define'
d_dbminitproto='undef'
d_difftime='define'
d_difftime64='undef'
d_dir_dd_fd='undef'
d_dirfd='define'
d_dirnamlen='undef'
d_dladdr='define'
d_dlerror='define'
d_dlopen='define'
d_dlsymun='undef'
d_dosuid='undef'
d_double_has_inf='define'
d_double_has_nan='define'
d_double_has_negative_zero='define'
d_double_has_subnormals='define'
d_double_style_cray='undef'
d_double_style_ibm='undef'
d_double_style_ieee='define'
d_double_style_vax='undef'
d_drand48_r='define'
d_drand48proto='define'
d_dup2='define'
d_dup3='define'
d_duplocale='define'
d_eaccess='define'
d_endgrent='define'
d_endgrent_r='undef'
d_endhent='define'
d_endhostent_r='undef'
d_endnent='define'
d_endnetent_r='undef'
d_endpent='define'
d_endprotoent_r='undef'
d_endpwent='define'
d_endpwent_r='undef'
d_endsent='define'
d_endservent_r='undef'
d_eofnblk='define'
d_erf='define'
d_erfc='define'
d_eunice='undef'
d_exp2='define'
d_expm1='define'
d_faststdio='undef'
d_fchdir='define'
d_fchmod='define'
d_fchmodat='define'
d_fchown='define'
d_fcntl='define'
d_fcntl_can_lock='define'
d_fd_macros='define'
d_fd_set='define'
d_fdclose='undef'
d_fdim='define'
d_fds_bits='define'
d_fegetround='define'
d_fgetpos='define'
d_finite='define'
d_finitel='define'
d_flexfnam='define'
d_flock='define'
d_flockproto='define'
d_fma='define'
d_fmax='define'
d_fmin='define'
d_fork='define'
d_fp_class='undef'
d_fp_classify='undef'
d_fp_classl='undef'
d_fpathconf='define'
d_fpclass='undef'
d_fpclassify='define'
d_fpclassl='undef'
d_fpgetround='undef'
d_fpos64_t='undef'
d_freelocale='define'
d_frexpl='define'
d_fs_data_s='undef'
d_fseeko='define'
d_fsetpos='define'
d_fstatfs='define'
d_fstatvfs='define'
d_fsync='define'
d_ftello='define'
d_ftime='undef'
d_futimes='define'
d_gai_strerror='define'
d_gdbm_ndbm_h_uses_prototypes='undef'
d_gdbmndbm_h_uses_prototypes='undef'
d_getaddrinfo='define'
d_getcwd='define'
d_getespwnam='undef'
d_getfsstat='undef'
d_getgrent='define'
d_getgrent_r='define'
d_getgrgid_r='define'
d_getgrnam_r='define'
d_getgrps='define'
d_gethbyaddr='define'
d_gethbyname='define'
d_gethent='define'
d_gethname='define'
d_gethostbyaddr_r='define'
d_gethostbyname_r='define'
d_gethostent_r='define'
d_gethostprotos='define'
d_getitimer='define'
d_getlogin='define'
d_getlogin_r='define'
d_getmnt='undef'
d_getmntent='define'
d_getnameinfo='define'
d_getnbyaddr='define'
d_getnbyname='define'
d_getnent='define'
d_getnetbyaddr_r='define'
d_getnetbyname_r='define'
d_getnetent_r='define'
d_getnetprotos='define'
d_getpagsz='define'
d_getpbyname='define'
d_getpbynumber='define'
d_getpent='define'
d_getpgid='define'
d_getpgrp='define'
d_getpgrp2='undef'
d_getppid='define'
d_getprior='define'
d_getprotobyname_r='define'
d_getprotobynumber_r='define'
d_getprotoent_r='define'
d_getprotoprotos='define'
d_getprpwnam='undef'
d_getpwent='define'
d_getpwent_r='define'
d_getpwnam_r='define'
d_getpwuid_r='define'
d_getsbyname='define'
d_getsbyport='define'
d_getsent='define'
d_getservbyname_r='define'
d_getservbyport_r='define'
d_getservent_r='define'
d_getservprotos='define'
d_getspnam='define'
d_getspnam_r='define'
d_gettimeod='define'
d_gmtime64='undef'
d_gmtime_r='define'
d_gnulibc='define'
d_grpasswd='define'
d_hasmntopt='define'
d_htonl='define'
d_hypot='define'
d_ilogb='define'
d_ilogbl='define'
d_inc_version_list='undef'
d_inetaton='define'
d_inetntop='define'
d_inetpton='define'
d_int64_t='define'
d_ip_mreq='define'
d_ip_mreq_source='define'
d_ipv6_mreq='define'
d_ipv6_mreq_source='undef'
d_isascii='define'
d_isblank='define'
d_isfinite='define'
d_isfinitel='undef'
d_isinf='define'
d_isinfl='define'
d_isless='undef'
d_isnan='define'
d_isnanl='define'
d_isnormal='define'
d_j0='define'
d_j0l='define'
d_killpg='define'
d_lc_monetary_2008='define'
d_lchown='define'
d_ldbl_dig='define'
d_ldexpl='define'
d_lgamma='define'
d_lgamma_r='define'
d_libm_lib_version='undef'
d_libname_unique='undef'
d_link='define'
d_linkat='define'
d_llrint='define'
d_llrintl='define'
d_llround='define'
d_llroundl='define'
d_localeconv_l='undef'
d_localtime64='undef'
d_localtime_r='define'
d_localtime_r_needs_tzset='define'
d_locconv='define'
d_lockf='define'
d_log1p='define'
d_log2='define'
d_logb='define'
d_long_double_style_ieee='define'
d_long_double_style_ieee_doubledouble='undef'
d_long_double_style_ieee_extended='define'
d_long_double_style_ieee_std='undef'
d_long_double_style_vax='undef'
d_longdbl='define'
d_longlong='define'
d_lrint='define'
d_lrintl='define'
d_lround='define'
d_lroundl='define'
d_lseekproto='define'
d_lstat='define'
d_madvise='define'
d_malloc_good_size='undef'
d_malloc_size='undef'
d_mblen='define'
d_mbrlen='define'
d_mbrtowc='define'
d_mbstowcs='define'
d_mbtowc='define'
d_memmem='define'
d_memrchr='define'
d_mkdir='define'
d_mkdtemp='define'
d_mkfifo='define'
d_mkostemp='define'
d_mkstemp='define'
d_mkstemps='define'
d_mktime='define'
d_mktime64='undef'
d_mmap='define'
d_modfl='define'
d_modflproto='define'
d_mprotect='define'
d_msg='define'
d_msg_ctrunc='define'
d_msg_dontroute='define'
d_msg_oob='define'
d_msg_peek='define'
d_msg_proxy='define'
d_msgctl='define'
d_msgget='define'
d_msghdr_s='define'
d_msgrcv='define'
d_msgsnd='define'
d_msync='define'
d_munmap='define'
d_mymalloc='undef'
d_nan='define'
d_nanosleep='define'
d_ndbm='undef'
d_ndbm_h_uses_prototypes='undef'
d_nearbyint='define'
d_newlocale='define'
d_nextafter='define'
d_nexttoward='define'
d_nice='define'
d_nl_langinfo='define'
d_nv_preserves_uv='undef'
d_nv_zero_is_allbits_zero='define'
d_off64_t='define'
d_old_pthread_create_joinable='undef'
d_oldpthreads='undef'
d_oldsock='undef'
d_open3='define'
d_openat='define'
d_pathconf='define'
d_pause='define'
d_perl_otherlibdirs='undef'
d_phostname='undef'
d_pipe='define'
d_pipe2='define'
d_poll='define'
d_portable='define'
d_prctl='define'
d_prctl_set_name='define'
d_printf_format_null='define'
d_procselfexe='define'
d_pseudofork='undef'
d_pthread_atfork='define'
d_pthread_attr_setscope='define'
d_pthread_yield='define'
d_ptrdiff_t='define'
d_pwage='undef'
d_pwchange='undef'
d_pwclass='undef'
d_pwcomment='undef'
d_pwexpire='undef'
d_pwgecos='define'
d_pwpasswd='define'
d_pwquota='undef'
d_qgcvt='define'
d_quad='define'
d_querylocale='undef'
d_random_r='define'
d_re_comp='undef'
d_readdir='define'
d_readdir64_r='define'
d_readdir_r='define'
d_readlink='define'
d_readv='define'
d_recvmsg='define'
d_regcmp='undef'
d_regcomp='define'
d_remainder='define'
d_remquo='define'
d_rename='define'
d_renameat='define'
d_rewinddir='define'
d_rint='define'
d_rmdir='define'
d_round='define'
d_sbrkproto='define'
d_scalbn='define'
d_scalbnl='define'
d_sched_yield='define'
d_scm_rights='define'
d_seekdir='define'
d_select='define'
d_sem='define'
d_semctl='define'
d_semctl_semid_ds='define'
d_semctl_semun='define'
d_semget='define'
d_semop='define'
d_sendmsg='define'
d_setegid='define'
d_seteuid='define'
d_setgrent='define'
d_setgrent_r='undef'
d_setgrps='define'
d_sethent='define'
d_sethostent_r='undef'
d_setitimer='define'
d_setlinebuf='define'
d_setlocale='define'
d_setlocale_r='undef'
d_setnent='define'
d_setnetent_r='undef'
d_setpent='define'
d_setpgid='define'
d_setpgrp='define'
d_setpgrp2='undef'
d_setprior='define'
d_setproctitle='undef'
d_setprotoent_r='undef'
d_setpwent='define'
d_setpwent_r='undef'
d_setregid='define'
d_setresgid='define'
d_setresuid='define'
d_setreuid='define'
d_setrgid='undef'
d_setruid='undef'
d_setsent='define'
d_setservent_r='undef'
d_setsid='define'
d_setvbuf='define'
d_shm='define'
d_shmat='define'
d_shmatprototype='define'
d_shmctl='define'
d_shmdt='define'
d_shmget='define'
d_sigaction='define'
d_siginfo_si_addr='define'
d_siginfo_si_band='define'
d_siginfo_si_errno='define'
d_siginfo_si_fd='define'
d_siginfo_si_pid='define'
d_siginfo_si_status='define'
d_siginfo_si_uid='define'
d_siginfo_si_value='define'
d_signbit='define'
d_sigprocmask='define'
d_sigsetjmp='define'
d_sin6_scope_id='define'
d_sitearch='define'
d_snprintf='define'
d_sockaddr_in6='define'
d_sockaddr_sa_len='undef'
d_sockatmark='define'
d_sockatmarkproto='define'
d_socket='define'
d_socklen_t='define'
d_sockpair='define'
d_socks5_init='undef'
d_sqrtl='define'
d_srand48_r='define'
d_srandom_r='define'
d_sresgproto='define'
d_sresuproto='define'
d_stat='define'
d_statblks='define'
d_statfs_f_flags='define'
d_statfs_s='define'
d_static_inline='define'
d_statvfs='define'
d_stdio_cnt_lval='undef'
d_stdio_ptr_lval='undef'
d_stdio_ptr_lval_nochange_cnt='undef'
d_stdio_ptr_lval_sets_cnt='undef'
d_stdio_stream_array='undef'
d_stdiobase='undef'
d_stdstdio='undef'
d_strcoll='define'
d_strerror_l='define'
d_strerror_r='define'
d_strftime='define'
d_strlcat='undef'
d_strlcpy='undef'
d_strnlen='define'
d_strtod='define'
d_strtod_l='define'
d_strtol='define'
d_strtold='define'
d_strtold_l='define'
d_strtoll='define'
d_strtoq='define'
d_strtoul='define'
d_strtoull='define'
d_strtouq='define'
d_strxfrm='define'
d_suidsafe='undef'
d_symlink='define'
d_syscall='define'
d_syscallproto='define'
d_sysconf='define'
d_sysernlst=''
d_syserrlst='define'
d_system='define'
d_tcgetpgrp='define'
d_tcsetpgrp='define'
d_telldir='define'
d_telldirproto='define'
d_tgamma='define'
d_thread_safe_nl_langinfo_l='define'
d_time='define'
d_timegm='define'
d_times='define'
d_tm_tm_gmtoff='define'
d_tm_tm_zone='define'
d_tmpnam_r='define'
d_trunc='define'
d_truncate='define'
d_truncl='define'
d_ttyname_r='define'
d_tzname='define'
d_u32align='define'
d_ualarm='define'
d_umask='define'
d_uname='define'
d_union_semun='undef'
d_unlinkat='define'
d_unordered='undef'
d_unsetenv='define'
d_uselocale='define'
d_usleep='define'
d_usleepproto='define'
d_ustat='undef'
d_vendorarch='undef'
d_vendorbin='undef'
d_vendorlib='undef'
d_vendorscript='undef'
d_vfork='undef'
d_void_closedir='undef'
d_voidsig='define'
d_voidtty=''
d_vsnprintf='define'
d_wait4='define'
d_waitpid='define'
d_wcscmp='define'
d_wcstombs='define'
d_wcsxfrm='define'
d_wctomb='define'
d_writev='define'
d_xenix='undef'
date='date'
db_hashtype='u_int32_t'
db_prefixtype='size_t'
db_version_major=''
db_version_minor=''
db_version_patch=''
default_inc_excludes_dot='define'
direntrytype='struct dirent'
dlext='so'
dlsrc='dl_dlopen.xs'
doubleinfbytes='0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x7f'
doublekind='3'
doublemantbits='52'
doublenanbytes='0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xff'
doublesize='8'
drand01='Perl_drand48()'
drand48_r_proto='REENTRANT_PROTO_I_ST'
dtrace=''
dtraceobject=''
dtracexnolibs=''
dynamic_ext='arybase attributes B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd Data/Dumper Devel/Peek Devel/PPPort Digest/MD5 Digest/SHA Encode Fcntl File/DosGlob File/Glob Filter/Util/Call Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util Math/BigInt/FastCalc MIME/Base64 mro Opcode PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via POSIX re SDBM_File Socket Storable Sys/Hostname Sys/Syslog threads threads/shared Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap'
eagain='EAGAIN'
ebcdic='undef'
echo='echo'
egrep='egrep'
emacs=''
endgrent_r_proto='0'
endhostent_r_proto='0'
endnetent_r_proto='0'
endprotoent_r_proto='0'
endpwent_r_proto='0'
endservent_r_proto='0'
eunicefix=':'
exe_ext=''
expr='expr'
extensions='arybase attributes B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd Data/Dumper Devel/Peek Devel/PPPort Digest/MD5 Digest/SHA Encode Fcntl File/DosGlob File/Glob Filter/Util/Call Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util Math/BigInt/FastCalc MIME/Base64 mro Opcode PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via POSIX re SDBM_File Socket Storable Sys/Hostname Sys/Syslog threads threads/shared Tie/Hash/NamedCapture Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap Archive/Tar Attribute/Handlers autodie AutoLoader autouse base B/Debug bignum Carp Config/Perl/V constant CPAN CPAN/Meta CPAN/Meta/Requirements CPAN/Meta/YAML Devel/SelfStubber Digest Dumpvalue encoding/warnings Env Errno experimental Exporter ExtUtils/CBuilder ExtUtils/Constant ExtUtils/Install ExtUtils/MakeMaker ExtUtils/Manifest ExtUtils/Miniperl ExtUtils/ParseXS FileCache File/Fetch File/Find File/Path File/Temp Filter/Simple Getopt/Long HTTP/Tiny I18N/Collate I18N/LangTags if IO/Compress IO/Socket/IP IO/Zlib IPC/Cmd IPC/Open3 JSON/PP lib libnet Locale/Codes Locale/Maketext Locale/Maketext/Simple Math/BigInt Math/BigRat Math/Complex Memoize Module/CoreList Module/Load Module/Load/Conditional Module/Loaded Module/Metadata Net/Ping NEXT Params/Check parent perlfaq PerlIO/via/QuotedPrint Perl/OSType Pod/Checker Pod/Escapes Pod/Functions Pod/Html podlators Pod/Parser Pod/Perldoc Pod/Simple Pod/Usage Safe Search/Dict SelfLoader Term/ANSIColor Term/Cap Term/Complete Term/ReadLine Test Test/Harness Test/Simple Text/Abbrev Text/Balanced Text/ParseWords Text/Tabs Thread/Queue Thread/Semaphore Tie/File Tie/Memoize Tie/RefHash Time/Local version XSLoader'
extern_C='extern'
extras=''
fflushNULL='define'
fflushall='undef'
find=''
firstmakefile='makefile'
flex=''
fpossize='16'
fpostype='fpos_t'
freetype='void'
from=':'
full_ar='ar'
full_csh='csh'
full_sed='sed'
gccansipedantic=''
gccosandvers=''
gccversion='5.5.0'
getgrent_r_proto='REENTRANT_PROTO_I_SBWR'
getgrgid_r_proto='REENTRANT_PROTO_I_TSBWR'
getgrnam_r_proto='REENTRANT_PROTO_I_CSBWR'
gethostbyaddr_r_proto='REENTRANT_PROTO_I_TsISBWRE'
gethostbyname_r_proto='REENTRANT_PROTO_I_CSBWRE'
gethostent_r_proto='REENTRANT_PROTO_I_SBWRE'
getlogin_r_proto='REENTRANT_PROTO_I_BW'
getnetbyaddr_r_proto='REENTRANT_PROTO_I_uISBWRE'
getnetbyname_r_proto='REENTRANT_PROTO_I_CSBWRE'
getnetent_r_proto='REENTRANT_PROTO_I_SBWRE'
getprotobyname_r_proto='REENTRANT_PROTO_I_CSBWR'
getprotobynumber_r_proto='REENTRANT_PROTO_I_ISBWR'
getprotoent_r_proto='REENTRANT_PROTO_I_SBWR'
getpwent_r_proto='REENTRANT_PROTO_I_SBWR'
getpwnam_r_proto='REENTRANT_PROTO_I_CSBWR'
getpwuid_r_proto='REENTRANT_PROTO_I_TSBWR'
getservbyname_r_proto='REENTRANT_PROTO_I_CCSBWR'
getservbyport_r_proto='REENTRANT_PROTO_I_ICSBWR'
getservent_r_proto='REENTRANT_PROTO_I_SBWR'
getspnam_r_proto='REENTRANT_PROTO_I_CSBWR'
gidformat='"u"'
gidsign='1'
gidsize='4'
gidtype='gid_t'
glibpth=''
gmake='gmake'
gmtime_r_proto='REENTRANT_PROTO_S_TS'
gnulibc_version='2.28'
grep='grep'
groupcat='cat /etc/group'
groupstype='gid_t'
gzip='gzip'
h_fcntl='false'
h_sysfile='true'
hint='recommended'
hostcat='cat /etc/hosts'
hostgenerate=''
hostosname=''
hostperl=''
html1dir=' '
html1direxp=''
html3dir=' '
html3direxp=''
i16size='2'
i16type='short'
i32size='4'
i32type='int'
i64size='8'
i64type='long'
i8size='1'
i8type='signed char'
i_arpainet='define'
i_bfd='define'
i_bsdioctl=''
i_crypt='define'
i_db='undef'
i_dbm='undef'
i_dirent='define'
i_dlfcn='define'
i_execinfo='define'
i_fcntl='undef'
i_fenv='define'
i_fp='undef'
i_fp_class='undef'
i_gdbm='undef'
i_gdbm_ndbm='undef'
i_gdbmndbm='undef'
i_grp='define'
i_ieeefp='undef'
i_inttypes='define'
i_langinfo='define'
i_libutil='undef'
i_limits='define'
i_locale='define'
i_machcthr='undef'
i_malloc='define'
i_mallocmalloc='undef'
i_mntent='define'
i_ndbm='undef'
i_netdb='define'
i_neterrno='undef'
i_netinettcp='define'
i_niin='define'
i_poll='define'
i_prot='undef'
i_pthread='define'
i_pwd='define'
i_quadmath='define'
i_rpcsvcdbm='undef'
i_sgtty='undef'
i_shadow='define'
i_socks='undef'
i_stdbool='define'
i_stdint='define'
i_stdlib='define'
i_string='define'
i_sunmath='undef'
i_sysaccess='undef'
i_sysdir='define'
i_sysfile='define'
i_sysfilio='undef'
i_sysin='undef'
i_sysioctl='define'
i_syslog='define'
i_sysmman='define'
i_sysmode='undef'
i_sysmount='define'
i_sysndir='undef'
i_sysparam='define'
i_syspoll='define'
i_sysresrc='define'
i_syssecrt='undef'
i_sysselct='define'
i_syssockio='undef'
i_sysstat='define'
i_sysstatfs='define'
i_sysstatvfs='define'
i_systime='define'
i_systimek='undef'
i_systimes='define'
i_systypes='define'
i_sysuio='define'
i_sysun='define'
i_sysutsname='define'
i_sysvfs='define'
i_syswait='define'
i_termio='undef'
i_termios='define'
i_time='define'
i_unistd='define'
i_ustat='undef'
i_utime='define'
i_vfork='undef'
i_wchar='define'
i_xlocale='undef'
ignore_versioned_solibs='y'
inc_version_list=' '
inc_version_list_init='0'
incpath=''
incpth='/gnu/store/571zsgw2bby7vrz8201br40snlvl0xbl-gcc-cross-x86_64-w64-mingw32-5.5.0/include /gnu/store/j74aabxwayjl9yfyrm6ni482gykxq48b-bzip2-1.0.6/include /gnu/store/9425b5dwpfc04bb4p58hsjypxghliyr3-xz-5.2.4/include /gnu/store/ypiyk8ngn79cz655jrl0hng37xv54yjr-file-5.33/include /gnu/store/l67sib1ld0fgyf0f4vrzyxnmn4yvimvb-gawk-4.2.1/include /gnu/store/7j3941iannrngdvgbclyxid12vds5w9i-make-4.2.1/include /gnu/store/02iklp4swqs0ipxhg5x9b2shmj6b30h1-binutils-2.31.1/include /gnu/store/n2p1zs14y89lwkg9da68y12pc10c6sw9-gcc-5.5.0/include /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include /gnu/store/xha1mk4qji8fmg62nygfzdx0l94ikdhm-linux-libre-headers-4.14.67/include /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/gcc/x86_64-unknown-linux-gnu/5.5.0/include /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/gcc/x86_64-unknown-linux-gnu/5.5.0/include-fixed'
inews=''
initialinstalllocation='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
installarchlib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi'
installbin='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
installhtml1dir=''
installhtml3dir=''
installman1dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
installman3dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
installprefix='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
installprefixexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
installprivlib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0'
installscript='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
installsitearch='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0/x86_64-linux-thread-multi'
installsitebin='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
installsitehtml1dir=''
installsitehtml3dir=''
installsitelib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0'
installsiteman1dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
installsiteman3dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
installsitescript='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
installstyle='lib/perl5'
installusrbinperl='undef'
installvendorarch=''
installvendorbin=''
installvendorhtml1dir=''
installvendorhtml3dir=''
installvendorlib=''
installvendorman1dir=''
installvendorman3dir=''
installvendorscript=''
intsize='4'
issymlink='test -h'
ivdformat='"ld"'
ivsize='8'
ivtype='long'
known_extensions='Amiga/ARexx Amiga/Exec Archive/Tar arybase Attribute/Handlers attributes autodie AutoLoader autouse B base B/Debug bignum Carp Compress/Raw/Bzip2 Compress/Raw/Zlib Config/Perl/V constant CPAN CPAN/Meta CPAN/Meta/Requirements CPAN/Meta/YAML Cwd Data/Dumper DB_File Devel/Peek Devel/PPPort Devel/SelfStubber Digest Digest/MD5 Digest/SHA Dumpvalue Encode encoding/warnings Env Errno experimental Exporter ExtUtils/CBuilder ExtUtils/Constant ExtUtils/Install ExtUtils/MakeMaker ExtUtils/Manifest ExtUtils/Miniperl ExtUtils/ParseXS Fcntl FileCache File/DosGlob File/Fetch File/Find File/Glob File/Path File/Temp Filter/Simple Filter/Util/Call GDBM_File Getopt/Long Hash/Util Hash/Util/FieldHash HTTP/Tiny I18N/Collate I18N/Langinfo I18N/LangTags if IO IO/Compress IO/Socket/IP IO/Zlib IPC/Cmd IPC/Open3 IPC/SysV JSON/PP lib libnet List/Util Locale/Codes Locale/Maketext Locale/Maketext/Simple Math/BigInt Math/BigInt/FastCalc Math/BigRat Math/Complex Memoize MIME/Base64 Module/CoreList Module/Load Module/Load/Conditional Module/Loaded Module/Metadata mro NDBM_File Net/Ping NEXT ODBM_File Opcode Params/Check parent perlfaq PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via PerlIO/via/QuotedPrint Perl/OSType Pod/Checker Pod/Escapes Pod/Functions Pod/Html podlators Pod/Parser Pod/Perldoc Pod/Simple Pod/Usage POSIX re Safe SDBM_File Search/Dict SelfLoader Socket Storable Sys/Hostname Sys/Syslog Term/ANSIColor Term/Cap Term/Complete Term/ReadLine Test Test/Harness Test/Simple Text/Abbrev Text/Balanced Text/ParseWords Text/Tabs Thread/Queue threads Thread/Semaphore threads/shared Tie/File Tie/Hash/NamedCapture Tie/Memoize Tie/RefHash Time/HiRes Time/Local Time/Piece Unicode/Collate Unicode/Normalize version VMS/DCLsym VMS/Filespec VMS/Stdio Win32 Win32API/File Win32CORE XS/APItest XSLoader XS/Typemap '
ksh=''
ld='gcc'
ld_can_script='define'
lddlflags='-shared -O2 -L/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib -fstack-protector-strong'
ldflags=' -fstack-protector-strong -L/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
ldflags_uselargefiles=''
ldlibpthname='LD_LIBRARY_PATH'
less='less'
lib_ext='.a'
libc=''
libdb_needs_pthread='N'
libperl='libperl.so'
libpth='/gnu/store/571zsgw2bby7vrz8201br40snlvl0xbl-gcc-cross-x86_64-w64-mingw32-5.5.0/lib /gnu/store/j74aabxwayjl9yfyrm6ni482gykxq48b-bzip2-1.0.6/lib /gnu/store/9425b5dwpfc04bb4p58hsjypxghliyr3-xz-5.2.4/lib /gnu/store/ypiyk8ngn79cz655jrl0hng37xv54yjr-file-5.33/lib /gnu/store/l67sib1ld0fgyf0f4vrzyxnmn4yvimvb-gawk-4.2.1/lib /gnu/store/02iklp4swqs0ipxhg5x9b2shmj6b30h1-binutils-2.31.1/lib /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/gcc/x86_64-unknown-linux-gnu/5.5.0/include-fixed'
libs='-lpthread -ldl -lm -lcrypt -lutil -lc'
libsdirs=' /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
libsfiles=' libpthread.so libdl.so libm.so libcrypt.so libutil.so libc.so'
libsfound=' /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libpthread.so /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libdl.so /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libm.so /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libcrypt.so /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libutil.so /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib/libc.so'
libspath=' /gnu/store/571zsgw2bby7vrz8201br40snlvl0xbl-gcc-cross-x86_64-w64-mingw32-5.5.0/lib /gnu/store/j74aabxwayjl9yfyrm6ni482gykxq48b-bzip2-1.0.6/lib /gnu/store/9425b5dwpfc04bb4p58hsjypxghliyr3-xz-5.2.4/lib /gnu/store/ypiyk8ngn79cz655jrl0hng37xv54yjr-file-5.33/lib /gnu/store/l67sib1ld0fgyf0f4vrzyxnmn4yvimvb-gawk-4.2.1/lib /gnu/store/02iklp4swqs0ipxhg5x9b2shmj6b30h1-binutils-2.31.1/lib /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/gcc/x86_64-unknown-linux-gnu/5.5.0/include-fixed'
libswanted='cl pthread socket inet nsl ndbm gdbm dbm db malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat'
libswanted_uselargefiles=''
line=''
lint=''
lkflags=''
ln='ln'
lns='/gnu/store/5s2nib1lrd2101bbrivcl17kjx1mspw6-coreutils-8.30/bin/ln -s'
localtime_r_proto='REENTRANT_PROTO_S_TS'
locincpth='/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include'
loclibpth='/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
longdblinfbytes='0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xff, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00'
longdblkind='3'
longdblmantbits='64'
longdblnanbytes='0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00'
longdblsize='16'
longlongsize='8'
longsize='8'
lp=''
lpr=''
ls='ls'
lseeksize='8'
lseektype='off_t'
mail=''
mailx=''
make='make'
make_set_make='#'
mallocobj=''
mallocsrc=''
malloctype='void *'
man1dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
man1direxp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
man1ext='1'
man3dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
man3direxp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
man3ext='3'
mips_type=''
mistrustnm=''
mkdir='mkdir'
mmaptype='void *'
modetype='mode_t'
more='more'
multiarch='undef'
mv=''
myarchname='x86_64-linux'
mydomain='.nonet'
myhostname='localhost'
myuname='linux '
n='-n'
need_va_copy='define'
netdb_hlen_type='size_t'
netdb_host_type='char *'
netdb_name_type='const char *'
netdb_net_type='in_addr_t'
nm='nm'
nm_opt=''
nm_so_opt='--dynamic'
nonxs_ext='Archive/Tar Attribute/Handlers autodie AutoLoader autouse base B/Debug bignum Carp Config/Perl/V constant CPAN CPAN/Meta CPAN/Meta/Requirements CPAN/Meta/YAML Devel/SelfStubber Digest Dumpvalue encoding/warnings Env Errno experimental Exporter ExtUtils/CBuilder ExtUtils/Constant ExtUtils/Install ExtUtils/MakeMaker ExtUtils/Manifest ExtUtils/Miniperl ExtUtils/ParseXS FileCache File/Fetch File/Find File/Path File/Temp Filter/Simple Getopt/Long HTTP/Tiny I18N/Collate I18N/LangTags if IO/Compress IO/Socket/IP IO/Zlib IPC/Cmd IPC/Open3 JSON/PP lib libnet Locale/Codes Locale/Maketext Locale/Maketext/Simple Math/BigInt Math/BigRat Math/Complex Memoize Module/CoreList Module/Load Module/Load/Conditional Module/Loaded Module/Metadata Net/Ping NEXT Params/Check parent perlfaq PerlIO/via/QuotedPrint Perl/OSType Pod/Checker Pod/Escapes Pod/Functions Pod/Html podlators Pod/Parser Pod/Perldoc Pod/Simple Pod/Usage Safe Search/Dict SelfLoader Term/ANSIColor Term/Cap Term/Complete Term/ReadLine Test Test/Harness Test/Simple Text/Abbrev Text/Balanced Text/ParseWords Text/Tabs Thread/Queue Thread/Semaphore Tie/File Tie/Memoize Tie/RefHash Time/Local version XSLoader'
nroff='nroff'
nvEUformat='"E"'
nvFUformat='"F"'
nvGUformat='"G"'
nv_overflows_integers_at='256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0'
nv_preserves_uv_bits='53'
nveformat='"e"'
nvfformat='"f"'
nvgformat='"g"'
nvmantbits='52'
nvsize='8'
nvtype='double'
o_nonblock='O_NONBLOCK'
obj_ext='.o'
old_pthread_create_joinable=''
optimize='-O2'
orderlib='false'
osname='linux'
osvers=''
otherlibdirs=' '
package='perl5'
pager='/usr/ucb/more'
passcat='cat /etc/passwd'
patchlevel='28'
path_sep=':'
perl='perl'
perl5=''
perl_patchlevel=''
perl_static_inline='static __inline__'
perladmin='guix@localhost.nonet'
perllibs='-lpthread -ldl -lm -lcrypt -lutil -lc'
perlpath='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin/perl'
pg='pg'
phostname='uname -n'
pidtype='pid_t'
plibpth=''
pmake=''
pr=''
prefix='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
prefixexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
privlib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0'
privlibexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0'
procselfexe='"/proc/self/exe"'
prototype='define'
ptrsize='8'
quadkind='2'
quadtype='long'
randbits='48'
randfunc='Perl_drand48'
random_r_proto='REENTRANT_PROTO_I_St'
randseedtype='U32'
ranlib=':'
rd_nodata='-1'
readdir64_r_proto='REENTRANT_PROTO_I_TSR'
readdir_r_proto='REENTRANT_PROTO_I_TSR'
revision='5'
rm='rm'
rm_try='/gnu/store/5s2nib1lrd2101bbrivcl17kjx1mspw6-coreutils-8.30/bin/rm -f try try a.out .out try.[cho] try..o core core.try* try.core*'
rmail=''
run=''
runnm='false'
sGMTIME_max='67768036191676799'
sGMTIME_min='-62167219200'
sLOCALTIME_max='67768036191676799'
sLOCALTIME_min='-62167219200'
sPRIEUldbl='"LE"'
sPRIFUldbl='"LF"'
sPRIGUldbl='"LG"'
sPRIXU64='"lX"'
sPRId64='"ld"'
sPRIeldbl='"Le"'
sPRIfldbl='"Lf"'
sPRIgldbl='"Lg"'
sPRIi64='"li"'
sPRIo64='"lo"'
sPRIu64='"lu"'
sPRIx64='"lx"'
sSCNfldbl='"Lf"'
sched_yield='sched_yield()'
scriptdir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
scriptdirexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
sed='sed'
seedfunc='Perl_drand48_init'
selectminbits='64'
selecttype='fd_set *'
sendmail=''
setgrent_r_proto='0'
sethostent_r_proto='0'
setlocale_r_proto='0'
setnetent_r_proto='0'
setprotoent_r_proto='0'
setpwent_r_proto='0'
setservent_r_proto='0'
sh='/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/sh'
shar=''
sharpbang='#!'
shmattype='void *'
shortsize='2'
shrpenv=''
shsharp='true'
sig_count='65'
sig_name='ZERO HUP INT QUIT ILL TRAP ABRT BUS FPE KILL USR1 SEGV USR2 PIPE ALRM TERM STKFLT CHLD CONT STOP TSTP TTIN TTOU URG XCPU XFSZ VTALRM PROF WINCH IO PWR SYS NUM32 NUM33 RTMIN NUM35 NUM36 NUM37 NUM38 NUM39 NUM40 NUM41 NUM42 NUM43 NUM44 NUM45 NUM46 NUM47 NUM48 NUM49 NUM50 NUM51 NUM52 NUM53 NUM54 NUM55 NUM56 NUM57 NUM58 NUM59 NUM60 NUM61 NUM62 NUM63 RTMAX IOT CLD POLL '
sig_name_init='"ZERO", "HUP", "INT", "QUIT", "ILL", "TRAP", "ABRT", "BUS", "FPE", "KILL", "USR1", "SEGV", "USR2", "PIPE", "ALRM", "TERM", "STKFLT", "CHLD", "CONT", "STOP", "TSTP", "TTIN", "TTOU", "URG", "XCPU", "XFSZ", "VTALRM", "PROF", "WINCH", "IO", "PWR", "SYS", "NUM32", "NUM33", "RTMIN", "NUM35", "NUM36", "NUM37", "NUM38", "NUM39", "NUM40", "NUM41", "NUM42", "NUM43", "NUM44", "NUM45", "NUM46", "NUM47", "NUM48", "NUM49", "NUM50", "NUM51", "NUM52", "NUM53", "NUM54", "NUM55", "NUM56", "NUM57", "NUM58", "NUM59", "NUM60", "NUM61", "NUM62", "NUM63", "RTMAX", "IOT", "CLD", "POLL", 0'
sig_num='0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 6 17 29 '
sig_num_init='0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 6, 17, 29, 0'
sig_size='68'
signal_t='void'
sitearch='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0/x86_64-linux-thread-multi'
sitearchexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0/x86_64-linux-thread-multi'
sitebin='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
sitebinexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
sitehtml1dir=''
sitehtml1direxp=''
sitehtml3dir=''
sitehtml3direxp=''
sitelib='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0'
sitelib_stem='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl'
sitelibexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0'
siteman1dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
siteman1direxp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man1'
siteman3dir='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
siteman3direxp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/share/man/man3'
siteprefix='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
siteprefixexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0'
sitescript='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
sitescriptexp='/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin'
sizesize='8'
sizetype='size_t'
sleep=''
smail=''
so='so'
sockethdr=''
socketlib=''
socksizetype='socklen_t'
sort='sort'
spackage='Perl5'
spitshell='cat'
srand48_r_proto='REENTRANT_PROTO_I_LS'
srandom_r_proto='REENTRANT_PROTO_I_TS'
src='.'
ssizetype='ssize_t'
st_ino_sign='1'
st_ino_size='8'
startperl='#!/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin/perl'
startsh='#!/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/sh'
static_ext=' '
stdchar='char'
stdio_base='((fp)->_base)'
stdio_bufsiz='((fp)->_cnt + (fp)->_ptr - (fp)->_base)'
stdio_cnt='((fp)->_cnt)'
stdio_filbuf=''
stdio_ptr='((fp)->_ptr)'
stdio_stream_array=''
strerror_r_proto='REENTRANT_PROTO_B_IBW'
submit=''
subversion='0'
sysman=''
sysroot=''
tail=''
tar=''
targetarch=''
targetdir=''
targetenv=''
targethost=''
targetmkdir=''
targetport=''
targetsh='/gnu/store/q19l04vd2za80mk1845pz7r8cz29qk43-bash-minimal-4.4.23/bin/sh'
tbl=''
tee=''
test='test'
timeincl='/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include/sys/time.h '
timetype='time_t'
tmpnam_r_proto='REENTRANT_PROTO_B_B'
to=':'
touch='touch'
tr='tr'
trnl='\n'
troff=''
ttyname_r_proto='REENTRANT_PROTO_I_IBW'
u16size='2'
u16type='unsigned short'
u32size='4'
u32type='unsigned int'
u64size='8'
u64type='unsigned long'
u8size='1'
u8type='unsigned char'
uidformat='"u"'
uidsign='1'
uidsize='4'
uidtype='uid_t'
uname='uname'
uniq='uniq'
uquadtype='unsigned long'
use5005threads='undef'
use64bitall='define'
use64bitint='define'
usecbacktrace='undef'
usecrosscompile='undef'
usedevel='undef'
usedl='define'
usedtrace='undef'
usefaststdio='undef'
useithreads='define'
usekernprocpathname='undef'
uselanginfo='true'
uselargefiles='define'
uselongdouble='undef'
usemallocwrap='define'
usemorebits='undef'
usemultiplicity='define'
usemymalloc='n'
usenm='false'
usensgetexecutablepath='undef'
useopcode='true'
useperlio='define'
useposix='true'
usequadmath='undef'
usereentrant='undef'
userelocatableinc='undef'
useshrplib='true'
usesitecustomize='undef'
usesocks='undef'
usethreads='define'
usevendorprefix='undef'
useversionedarchname='undef'
usevfork='false'
usrinc='/usr/include'
uuname=''
uvXUformat='"lX"'
uvoformat='"lo"'
uvsize='8'
uvtype='unsigned long'
uvuformat='"lu"'
uvxformat='"lx"'
vendorarch=''
vendorarchexp=''
vendorbin=''
vendorbinexp=''
vendorhtml1dir=' '
vendorhtml1direxp=''
vendorhtml3dir=' '
vendorhtml3direxp=''
vendorlib=''
vendorlib_stem=''
vendorlibexp=''
vendorman1dir=' '
vendorman1direxp=''
vendorman3dir=' '
vendorman3direxp=''
vendorprefix=''
vendorprefixexp=''
vendorscript=''
vendorscriptexp=''
version='5.28.0'
version_patchlevel_string='version 28 subversion 0'
versiononly='undef'
vi=''
xlibpth=''
yacc='yacc'
yaccflags=''
zcat=''
zip='zip'
!END!
my $i = ord(8);
foreach my $c (7,6,5,4,3,2,1) { $i <<= 8; $i |= ord($c); }
our $byteorder = join('', unpack('aaaaaaaa', pack('L!', $i)));
s/(byteorder=)(['"]).*?\2/$1$2$Config::byteorder$2/m;
my $config_sh_len = length $_;
our $Config_SH_expanded = "\n$_" . << 'EOVIRTUAL';
ccflags_nolargefiles='-D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/include -D_FORTIFY_SOURCE=2'
ldflags_nolargefiles=' -fstack-protector-strong -L/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
libs_nolargefiles='-lpthread -ldl -lm -lcrypt -lutil -lc'
libswanted_nolargefiles='cl pthread socket inet nsl ndbm gdbm dbm db malloc dl ld sun m crypt sec util c cposix posix ucb BSD gdbm_compat'
ccwarnflags=' -Wall -Werror=declaration-after-statement -Werror=pointer-arith -Wextra -Wc++-compat -Wwrite-strings'
ccstdflags=' -std=gnu89'
EOVIRTUAL
eval {
# do not have hairy conniptions if this isnt available
require 'Config_git.pl';
$Config_SH_expanded .= $Config::Git_Data;
1;
} or warn "Warning: failed to load Config_git.pl, something strange about this perl...\n";
# Search for it in the big string
sub fetch_string {
my($self, $key) = @_;
return undef unless $Config_SH_expanded =~ /\n$key=\'(.*?)\'\n/s;
# So we can say "if $Config{'foo'}".
$self->{$key} = $1 eq 'undef' ? undef : $1;
}
my $prevpos = 0;
sub FIRSTKEY {
$prevpos = 0;
substr($Config_SH_expanded, 1, index($Config_SH_expanded, '=') - 1 );
}
sub NEXTKEY {
my $pos = index($Config_SH_expanded, qq('\n), $prevpos) + 2;
my $len = index($Config_SH_expanded, "=", $pos) - $pos;
$prevpos = $pos;
$len > 0 ? substr($Config_SH_expanded, $pos, $len) : undef;
}
sub EXISTS {
return 1 if exists($_[0]->{$_[1]});
return(index($Config_SH_expanded, "\n$_[1]='") != -1
);
}
sub STORE { die "\%Config::Config is read-only\n" }
*DELETE = *CLEAR = \*STORE; # Typeglob aliasing uses less space
sub config_sh {
substr $Config_SH_expanded, 1, $config_sh_len;
}
sub config_re {
my $re = shift;
return map { chomp; $_ } grep eval{ /^(?:$re)=/ }, split /^/,
$Config_SH_expanded;
}
sub config_vars {
# implements -V:cfgvar option (see perlrun -V:)
foreach (@_) {
# find optional leading, trailing colons; and query-spec
my ($notag,$qry,$lncont) = m/^(:)?(.*?)(:)?$/; # flags fore and aft,
# map colon-flags to print decorations
my $prfx = $notag ? '': "$qry="; # tag-prefix for print
my $lnend = $lncont ? ' ' : ";\n"; # line ending for print
# all config-vars are by definition \w only, any \W means regex
if ($qry =~ /\W/) {
my @matches = config_re($qry);
print map "$_$lnend", @matches ? @matches : "$qry: not found" if !$notag;
print map { s/\w+=//; "$_$lnend" } @matches ? @matches : "$qry: not found" if $notag;
} else {
my $v = (exists $Config::Config{$qry}) ? $Config::Config{$qry}
: 'UNKNOWN';
$v = 'undef' unless defined $v;
print "${prfx}'${v}'$lnend";
}
}
}
# Called by the real AUTOLOAD
sub launcher {
undef &AUTOLOAD;
goto \&$Config::AUTOLOAD;
}
1;
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: Net/Config.pm --]
[-- Type: text/x-perl, Size: 8488 bytes --]
# Net::Config.pm
#
# Copyright (C) 2000 Graham Barr. All rights reserved.
# Copyright (C) 2013-2014, 2016 Steve Hay. All rights reserved.
# This module is free software; you can redistribute it and/or modify it under
# the same terms as Perl itself, i.e. under the terms of either the GNU General
# Public License or the Artistic License, as specified in the F<LICENCE> file.
package Net::Config;
use 5.008001;
use strict;
use warnings;
use Exporter;
use Socket qw(inet_aton inet_ntoa);
our @EXPORT = qw(%NetConfig);
our @ISA = qw(Net::LocalCfg Exporter);
our $VERSION = "3.11";
our($CONFIGURE, $LIBNET_CFG);
eval {
local @INC = @INC;
pop @INC if $INC[-1] eq '.';
local $SIG{__DIE__};
require Net::LocalCfg;
};
our %NetConfig = (
nntp_hosts => [],
snpp_hosts => [],
pop3_hosts => [],
smtp_hosts => [],
ph_hosts => [],
daytime_hosts => [],
time_hosts => [],
inet_domain => undef,
ftp_firewall => undef,
ftp_ext_passive => 1,
ftp_int_passive => 1,
test_hosts => 1,
test_exist => 1,
);
#
# Try to get as much configuration info as possible from InternetConfig
#
{
## no critic (BuiltinFunctions::ProhibitStringyEval)
$^O eq 'MacOS' and eval <<TRY_INTERNET_CONFIG;
use Mac::InternetConfig;
{
my %nc = (
nntp_hosts => [ \$InternetConfig{ kICNNTPHost() } ],
pop3_hosts => [ \$InternetConfig{ kICMailAccount() } =~ /\@(.*)/ ],
smtp_hosts => [ \$InternetConfig{ kICSMTPHost() } ],
ftp_testhost => \$InternetConfig{ kICFTPHost() } ? \$InternetConfig{ kICFTPHost()} : undef,
ph_hosts => [ \$InternetConfig{ kICPhHost() } ],
ftp_ext_passive => \$InternetConfig{"646F676F\xA5UsePassiveMode"} || 0,
ftp_int_passive => \$InternetConfig{"646F676F\xA5UsePassiveMode"} || 0,
socks_hosts =>
\$InternetConfig{ kICUseSocks() } ? [ \$InternetConfig{ kICSocksHost() } ] : [],
ftp_firewall =>
\$InternetConfig{ kICUseFTPProxy() } ? [ \$InternetConfig{ kICFTPProxyHost() } ] : [],
);
\@NetConfig{keys %nc} = values %nc;
}
TRY_INTERNET_CONFIG
}
my $file = __FILE__;
my $ref;
$file =~ s/Config.pm/libnet.cfg/;
if (-f $file) {
$ref = eval { local $SIG{__DIE__}; do $file };
if (ref($ref) eq 'HASH') {
%NetConfig = (%NetConfig, %{$ref});
$LIBNET_CFG = $file;
}
}
if ($< == $> and !$CONFIGURE) {
my $home = eval { local $SIG{__DIE__}; (getpwuid($>))[7] } || $ENV{HOME};
$home ||= $ENV{HOMEDRIVE} . ($ENV{HOMEPATH} || '') if defined $ENV{HOMEDRIVE};
if (defined $home) {
$file = $home . "/.libnetrc";
$ref = eval { local $SIG{__DIE__}; do $file } if -f $file;
%NetConfig = (%NetConfig, %{$ref})
if ref($ref) eq 'HASH';
}
}
my ($k, $v);
while (($k, $v) = each %NetConfig) {
$NetConfig{$k} = [$v]
if ($k =~ /_hosts$/ and $k ne "test_hosts" and defined($v) and !ref($v));
}
# Take a hostname and determine if it is inside the firewall
sub requires_firewall {
shift; # ignore package
my $host = shift;
return 0 unless defined $NetConfig{'ftp_firewall'};
$host = inet_aton($host) or return -1;
$host = inet_ntoa($host);
if (exists $NetConfig{'local_netmask'}) {
my $quad = unpack("N", pack("C*", split(/\./, $host)));
my $list = $NetConfig{'local_netmask'};
$list = [$list] unless ref($list);
foreach (@$list) {
my ($net, $bits) = (m#^(\d+\.\d+\.\d+\.\d+)/(\d+)$#) or next;
my $mask = ~0 << (32 - $bits);
my $addr = unpack("N", pack("C*", split(/\./, $net)));
return 0 if (($addr & $mask) == ($quad & $mask));
}
return 1;
}
return 0;
}
*is_external = \&requires_firewall;
1;
__END__
=head1 NAME
Net::Config - Local configuration data for libnet
=head1 SYNOPSIS
use Net::Config qw(%NetConfig);
=head1 DESCRIPTION
C<Net::Config> holds configuration data for the modules in the libnet
distribution. During installation you will be asked for these values.
The configuration data is held globally in a file in the perl installation
tree, but a user may override any of these values by providing their own. This
can be done by having a C<.libnetrc> file in their home directory. This file
should return a reference to a HASH containing the keys described below.
For example
# .libnetrc
{
nntp_hosts => [ "my_preferred_host" ],
ph_hosts => [ "my_ph_server" ],
}
__END__
=head1 METHODS
C<Net::Config> defines the following methods. They are methods as they are
invoked as class methods. This is because C<Net::Config> inherits from
C<Net::LocalCfg> so you can override these methods if you want.
=over 4
=item requires_firewall ( HOST )
Attempts to determine if a given host is outside your firewall. Possible
return values are.
-1 Cannot lookup hostname
0 Host is inside firewall (or there is no ftp_firewall entry)
1 Host is outside the firewall
This is done by using hostname lookup and the C<local_netmask> entry in
the configuration data.
=back
=head1 NetConfig VALUES
=over 4
=item nntp_hosts
=item snpp_hosts
=item pop3_hosts
=item smtp_hosts
=item ph_hosts
=item daytime_hosts
=item time_hosts
Each is a reference to an array of hostnames (in order of preference),
which should be used for the given protocol
=item inet_domain
Your internet domain name
=item ftp_firewall
If you have an FTP proxy firewall (B<NOT> an HTTP or SOCKS firewall)
then this value should be set to the firewall hostname. If your firewall
does not listen to port 21, then this value should be set to
C<"hostname:port"> (eg C<"hostname:99">)
=item ftp_firewall_type
There are many different ftp firewall products available. But unfortunately
there is no standard for how to traverse a firewall. The list below shows the
sequence of commands that Net::FTP will use
user Username for remote host
pass Password for remote host
fwuser Username for firewall
fwpass Password for firewall
remote.host The hostname of the remote ftp server
=over 4
=item 0Z<>
There is no firewall
=item 1Z<>
USER user@remote.host
PASS pass
=item 2Z<>
USER fwuser
PASS fwpass
USER user@remote.host
PASS pass
=item 3Z<>
USER fwuser
PASS fwpass
SITE remote.site
USER user
PASS pass
=item 4Z<>
USER fwuser
PASS fwpass
OPEN remote.site
USER user
PASS pass
=item 5Z<>
USER user@fwuser@remote.site
PASS pass@fwpass
=item 6Z<>
USER fwuser@remote.site
PASS fwpass
USER user
PASS pass
=item 7Z<>
USER user@remote.host
PASS pass
AUTH fwuser
RESP fwpass
=back
=item ftp_ext_passive
=item ftp_int_passive
FTP servers can work in passive or active mode. Active mode is when
you want to transfer data you have to tell the server the address and
port to connect to. Passive mode is when the server provide the
address and port and you establish the connection.
With some firewalls active mode does not work as the server cannot
connect to your machine (because you are behind a firewall) and the firewall
does not re-write the command. In this case you should set C<ftp_ext_passive>
to a I<true> value.
Some servers are configured to only work in passive mode. If you have
one of these you can force C<Net::FTP> to always transfer in passive
mode; when not going via a firewall, by setting C<ftp_int_passive> to
a I<true> value.
=item local_netmask
A reference to a list of netmask strings in the form C<"134.99.4.0/24">.
These are used by the C<requires_firewall> function to determine if a given
host is inside or outside your firewall.
=back
The following entries are used during installation & testing on the
libnet package
=over 4
=item test_hosts
If true then C<make test> may attempt to connect to hosts given in the
configuration.
=item test_exists
If true then C<Configure> will check each hostname given that it exists
=back
=head1 AUTHOR
Graham Barr E<lt>F<gbarr@pobox.com>E<gt>.
Steve Hay E<lt>F<shay@cpan.org>E<gt> is now maintaining libnet as of version
1.22_02.
=head1 COPYRIGHT
Copyright (C) 1998-2011 Graham Barr. All rights reserved.
Copyright (C) 2013-2014, 2016 Steve Hay. All rights reserved.
=head1 LICENCE
This module is free software; you can redistribute it and/or modify it under the
same terms as Perl itself, i.e. under the terms of either the GNU General Public
License or the Artistic License, as specified in the F<LICENCE> file.
=cut
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #4: ExtUtils/MakeMaker/Config.pm --]
[-- Type: text/x-perl, Size: 593 bytes --]
package ExtUtils::MakeMaker::Config;
use strict;
our $VERSION = '7.34';
$VERSION = eval $VERSION;
use Config ();
# Give us an overridable config.
our %Config = %Config::Config;
sub import {
my $caller = caller;
no strict 'refs'; ## no critic
*{$caller.'::Config'} = \%Config;
}
1;
=head1 NAME
ExtUtils::MakeMaker::Config - Wrapper around Config.pm
=head1 SYNOPSIS
use ExtUtils::MakeMaker::Config;
print $Config{installbin}; # or whatever
=head1 DESCRIPTION
B<FOR INTERNAL USE ONLY>
A very thin wrapper around Config.pm so MakeMaker is easier to test.
=cut
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #5: x86_64-linux-thread-multi/Config.pm --]
[-- Type: text/x-perl, Size: 3952 bytes --]
# This file was created by configpm when Perl was built. Any changes
# made to this file will be lost the next time perl is built.
# for a description of the variables, please have a look at the
# Glossary file, as written in the Porting folder, or use the url:
# http://perl5.git.perl.org/perl.git/blob/HEAD:/Porting/Glossary
package Config;
use strict;
use warnings;
our ( %Config, $VERSION );
$VERSION = "5.028000";
# Skip @Config::EXPORT because it only contains %Config, which we special
# case below as it's not a function. @Config::EXPORT won't change in the
# lifetime of Perl 5.
my %Export_Cache = (myconfig => 1, config_sh => 1, config_vars => 1,
config_re => 1, compile_date => 1, local_patches => 1,
bincompat_options => 1, non_bincompat_options => 1,
header_files => 1);
@Config::EXPORT = qw(%Config);
@Config::EXPORT_OK = keys %Export_Cache;
# Need to stub all the functions to make code such as print Config::config_sh
# keep working
sub bincompat_options;
sub compile_date;
sub config_re;
sub config_sh;
sub config_vars;
sub header_files;
sub local_patches;
sub myconfig;
sub non_bincompat_options;
# Define our own import method to avoid pulling in the full Exporter:
sub import {
shift;
@_ = @Config::EXPORT unless @_;
my @funcs = grep $_ ne '%Config', @_;
my $export_Config = @funcs < @_ ? 1 : 0;
no strict 'refs';
my $callpkg = caller(0);
foreach my $func (@funcs) {
die qq{"$func" is not exported by the Config module\n}
unless $Export_Cache{$func};
*{$callpkg.'::'.$func} = \&{$func};
}
*{"$callpkg\::Config"} = \%Config if $export_Config;
return;
}
die "$0: Perl lib version (5.28.0) doesn't match executable '$^X' version ($])"
unless $^V;
$^V eq 5.28.0
or die sprintf "%s: Perl lib version (5.28.0) doesn't match executable '$^X' version (%vd)", $0, $^V;
sub FETCH {
my($self, $key) = @_;
# check for cached value (which may be undef so we use exists not defined)
return exists $self->{$key} ? $self->{$key} : $self->fetch_string($key);
}
sub TIEHASH {
bless $_[1], $_[0];
}
sub DESTROY { }
sub AUTOLOAD {
require 'Config_heavy.pl';
goto \&launcher unless $Config::AUTOLOAD =~ /launcher$/;
die "&Config::AUTOLOAD failed on $Config::AUTOLOAD";
}
# tie returns the object, so the value returned to require will be true.
tie %Config, 'Config', {
archlibexp => '/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0/x86_64-linux-thread-multi',
archname => 'x86_64-linux-thread-multi',
cc => 'gcc',
d_readlink => 'define',
d_symlink => 'define',
dlext => 'so',
dlsrc => 'dl_dlopen.xs',
dont_use_nlink => undef,
exe_ext => '',
inc_version_list => ' ',
intsize => '4',
ldlibpthname => 'LD_LIBRARY_PATH',
libpth => '/gnu/store/571zsgw2bby7vrz8201br40snlvl0xbl-gcc-cross-x86_64-w64-mingw32-5.5.0/lib /gnu/store/j74aabxwayjl9yfyrm6ni482gykxq48b-bzip2-1.0.6/lib /gnu/store/9425b5dwpfc04bb4p58hsjypxghliyr3-xz-5.2.4/lib /gnu/store/ypiyk8ngn79cz655jrl0hng37xv54yjr-file-5.33/lib /gnu/store/l67sib1ld0fgyf0f4vrzyxnmn4yvimvb-gawk-4.2.1/lib /gnu/store/02iklp4swqs0ipxhg5x9b2shmj6b30h1-binutils-2.31.1/lib /gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib /gnu/store/4sqps8dczv3g7rwbdibfz6rf5jlk7w90-gcc-5.5.0-lib/lib/gcc/x86_64-unknown-linux-gnu/5.5.0/include-fixed',
osname => 'linux',
osvers => '',
path_sep => ':',
privlibexp => '/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/5.28.0',
scriptdir => '/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/bin',
sitearchexp => '/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0/x86_64-linux-thread-multi',
sitelibexp => '/gnu/store/fa7x5xq709dvsx0rnz167f5ba2h6ssqw-perl-5.28.0/lib/perl5/site_perl/5.28.0',
so => 'so',
useithreads => 'define',
usevendorprefix => undef,
version => '5.28.0',
};
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #6: Encode/Config.pm --]
[-- Type: text/x-perl, Size: 6065 bytes --]
#
# Demand-load module list
#
package Encode::Config;
our $VERSION = do { my @r = ( q$Revision: 2.5 $ =~ /\d+/g ); sprintf "%d." . "%02d" x $#r, @r };
use strict;
use warnings;
our %ExtModule = (
# Encode::Byte
#iso-8859-1 is in Encode.pm itself
'iso-8859-2' => 'Encode::Byte',
'iso-8859-3' => 'Encode::Byte',
'iso-8859-4' => 'Encode::Byte',
'iso-8859-5' => 'Encode::Byte',
'iso-8859-6' => 'Encode::Byte',
'iso-8859-7' => 'Encode::Byte',
'iso-8859-8' => 'Encode::Byte',
'iso-8859-9' => 'Encode::Byte',
'iso-8859-10' => 'Encode::Byte',
'iso-8859-11' => 'Encode::Byte',
'iso-8859-13' => 'Encode::Byte',
'iso-8859-14' => 'Encode::Byte',
'iso-8859-15' => 'Encode::Byte',
'iso-8859-16' => 'Encode::Byte',
'koi8-f' => 'Encode::Byte',
'koi8-r' => 'Encode::Byte',
'koi8-u' => 'Encode::Byte',
'viscii' => 'Encode::Byte',
'cp424' => 'Encode::Byte',
'cp437' => 'Encode::Byte',
'cp737' => 'Encode::Byte',
'cp775' => 'Encode::Byte',
'cp850' => 'Encode::Byte',
'cp852' => 'Encode::Byte',
'cp855' => 'Encode::Byte',
'cp856' => 'Encode::Byte',
'cp857' => 'Encode::Byte',
'cp858' => 'Encode::Byte',
'cp860' => 'Encode::Byte',
'cp861' => 'Encode::Byte',
'cp862' => 'Encode::Byte',
'cp863' => 'Encode::Byte',
'cp864' => 'Encode::Byte',
'cp865' => 'Encode::Byte',
'cp866' => 'Encode::Byte',
'cp869' => 'Encode::Byte',
'cp874' => 'Encode::Byte',
'cp1006' => 'Encode::Byte',
'cp1250' => 'Encode::Byte',
'cp1251' => 'Encode::Byte',
'cp1252' => 'Encode::Byte',
'cp1253' => 'Encode::Byte',
'cp1254' => 'Encode::Byte',
'cp1255' => 'Encode::Byte',
'cp1256' => 'Encode::Byte',
'cp1257' => 'Encode::Byte',
'cp1258' => 'Encode::Byte',
'AdobeStandardEncoding' => 'Encode::Byte',
'MacArabic' => 'Encode::Byte',
'MacCentralEurRoman' => 'Encode::Byte',
'MacCroatian' => 'Encode::Byte',
'MacCyrillic' => 'Encode::Byte',
'MacFarsi' => 'Encode::Byte',
'MacGreek' => 'Encode::Byte',
'MacHebrew' => 'Encode::Byte',
'MacIcelandic' => 'Encode::Byte',
'MacRoman' => 'Encode::Byte',
'MacRomanian' => 'Encode::Byte',
'MacRumanian' => 'Encode::Byte',
'MacSami' => 'Encode::Byte',
'MacThai' => 'Encode::Byte',
'MacTurkish' => 'Encode::Byte',
'MacUkrainian' => 'Encode::Byte',
'nextstep' => 'Encode::Byte',
'hp-roman8' => 'Encode::Byte',
#'gsm0338' => 'Encode::Byte',
'gsm0338' => 'Encode::GSM0338',
# Encode::EBCDIC
'cp37' => 'Encode::EBCDIC',
'cp500' => 'Encode::EBCDIC',
'cp875' => 'Encode::EBCDIC',
'cp1026' => 'Encode::EBCDIC',
'cp1047' => 'Encode::EBCDIC',
'posix-bc' => 'Encode::EBCDIC',
# Encode::Symbol
'dingbats' => 'Encode::Symbol',
'symbol' => 'Encode::Symbol',
'AdobeSymbol' => 'Encode::Symbol',
'AdobeZdingbat' => 'Encode::Symbol',
'MacDingbats' => 'Encode::Symbol',
'MacSymbol' => 'Encode::Symbol',
# Encode::Unicode
'UCS-2BE' => 'Encode::Unicode',
'UCS-2LE' => 'Encode::Unicode',
'UTF-16' => 'Encode::Unicode',
'UTF-16BE' => 'Encode::Unicode',
'UTF-16LE' => 'Encode::Unicode',
'UTF-32' => 'Encode::Unicode',
'UTF-32BE' => 'Encode::Unicode',
'UTF-32LE' => 'Encode::Unicode',
'UTF-7' => 'Encode::Unicode::UTF7',
);
unless ( ord("A") == 193 ) {
%ExtModule = (
%ExtModule,
'euc-cn' => 'Encode::CN',
'gb12345-raw' => 'Encode::CN',
'gb2312-raw' => 'Encode::CN',
'hz' => 'Encode::CN',
'iso-ir-165' => 'Encode::CN',
'cp936' => 'Encode::CN',
'MacChineseSimp' => 'Encode::CN',
'7bit-jis' => 'Encode::JP',
'euc-jp' => 'Encode::JP',
'iso-2022-jp' => 'Encode::JP',
'iso-2022-jp-1' => 'Encode::JP',
'jis0201-raw' => 'Encode::JP',
'jis0208-raw' => 'Encode::JP',
'jis0212-raw' => 'Encode::JP',
'cp932' => 'Encode::JP',
'MacJapanese' => 'Encode::JP',
'shiftjis' => 'Encode::JP',
'euc-kr' => 'Encode::KR',
'iso-2022-kr' => 'Encode::KR',
'johab' => 'Encode::KR',
'ksc5601-raw' => 'Encode::KR',
'cp949' => 'Encode::KR',
'MacKorean' => 'Encode::KR',
'big5-eten' => 'Encode::TW',
'big5-hkscs' => 'Encode::TW',
'cp950' => 'Encode::TW',
'MacChineseTrad' => 'Encode::TW',
#'big5plus' => 'Encode::HanExtra',
#'euc-tw' => 'Encode::HanExtra',
#'gb18030' => 'Encode::HanExtra',
'MIME-Header' => 'Encode::MIME::Header',
'MIME-B' => 'Encode::MIME::Header',
'MIME-Q' => 'Encode::MIME::Header',
'MIME-Header-ISO_2022_JP' => 'Encode::MIME::Header::ISO_2022_JP',
);
}
#
# Why not export ? to keep ConfigLocal Happy!
#
while ( my ( $enc, $mod ) = each %ExtModule ) {
$Encode::ExtModule{$enc} = $mod;
}
1;
__END__
=head1 NAME
Encode::Config -- internally used by Encode
=cut
[-- Attachment #7: Type: text/plain, Size: 1348 bytes --]
>
> I tried it myself (with mingw target) and I got:
>
> loclibpth='/gnu/store/h90vnqw0nwd0hhm1l5dgxsdrigddfmq4-glibc-2.28/lib'
I have exactly this one in Config_heavy.pl.
> So try putting (assoc-ref native-inputs "libc") instead of
> (assoc-ref inputs "libc") in the perl package definition (make sure to
> accept native-inputs in the function in the first place) in order to debug
> the problem (or maybe (assoc-ref inputs "mingw-source")).
I am not 100% sure I understood everything, but I tried that and it
changed nothing.
>
> When cross compiling it's important to get right which parts you get
> from the host libs and which from the target libs, maybe that's messed
> up there.
I am trying to build Gtk+ for mingw. This gives me an error in the perl
dependency. I have the same error if I build perl for mingw, but it is
a little confusing: perl should be a "maintainer" dependency for Gtk+ (I
guess? Maybe for automake or some code generators like the
gobject-introspection tools?), so it should be
built to run on the build machine (x86_64-linux) and not on the
host/target (mingw). Why is there an error if I build perl for mingw,
or if I build perl as a dependency for mingw Gtk+, but not if I build
perl for my native system? Or maybe native-perl and target-perl are
both dependencies for target-gtk+?
Best regards,
Vivien
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 13:16 ` Jan Nieuwenhuizen
@ 2019-09-14 17:25 ` Vivien Kraus
2019-09-15 12:16 ` Jan Nieuwenhuizen
0 siblings, 1 reply; 10+ messages in thread
From: Vivien Kraus @ 2019-09-14 17:25 UTC (permalink / raw)
To: Jan Nieuwenhuizen; +Cc: 37403
Hello,
Jan Nieuwenhuizen writes:
> Are you using the core-updates-next branch?
No, how do I do that?
Best regards,
Vivien
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-14 17:25 ` Vivien Kraus
@ 2019-09-15 12:16 ` Jan Nieuwenhuizen
2020-03-25 19:49 ` Mathieu Othacehe
0 siblings, 1 reply; 10+ messages in thread
From: Jan Nieuwenhuizen @ 2019-09-15 12:16 UTC (permalink / raw)
To: Vivien Kraus; +Cc: 37403
Vivien Kraus writes:
>> Are you using the core-updates-next branch?
>
> No,
Ah. In that case it's a `know bug' that is being worked on.
> how do I do that?
I looked into core-updates-next and at the moment it does not seem to be
in a really usable state, in other words: work in progress.
Theoretically one might do `guix pull --branch=<branch-name>'. However,
branches other than master and version-1.0.x are generally not suited
for general use. See `14.6 Submitting Patches'
(https://guix.gnu.org/manual/en/html_node/Submitting-Patches.html).
Using a developer branch like core-updates-next is usually done by
working on a clone of the Guix Git archive. See `14.1 Building from
Git' (https://guix.gnu.org/manual/en/html_node/Building-from-Git.html).
Greetings,
janneke
--
Jan Nieuwenhuizen <janneke@gnu.org> | GNU LilyPond http://lilypond.org
Freelance IT http://JoyofSource.com | Avatar® http://AvatarAcademy.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl'
2019-09-15 12:16 ` Jan Nieuwenhuizen
@ 2020-03-25 19:49 ` Mathieu Othacehe
0 siblings, 0 replies; 10+ messages in thread
From: Mathieu Othacehe @ 2020-03-25 19:49 UTC (permalink / raw)
To: Jan Nieuwenhuizen; +Cc: 37403, Vivien Kraus
Hello,
A small update on this bug, cross-compilation to x86_64-w64-mingw32 does
not fail anymore on core-updates.
However, the native gcc is used to build perl so there is still some
work required!
Mathieu
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-03-25 19:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-14 7:53 bug#37403: Cannot 'guix guix build --target=x86_64-w64-mingw32 perl' Vivien Kraus
2019-09-14 11:16 ` P via Bug reports for GNU Guix
2019-09-14 11:28 ` Vivien Kraus
2019-09-14 11:59 ` Danny Milosavljevic
2019-09-14 12:23 ` Danny Milosavljevic
2019-09-14 17:24 ` Vivien Kraus
2019-09-14 13:16 ` Jan Nieuwenhuizen
2019-09-14 17:25 ` Vivien Kraus
2019-09-15 12:16 ` Jan Nieuwenhuizen
2020-03-25 19:49 ` Mathieu Othacehe
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).