* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
@ 2020-06-02 18:59 Chris Marusich
2020-06-03 9:48 ` Chris Marusich
0 siblings, 1 reply; 45+ messages in thread
From: Chris Marusich @ 2020-06-02 18:59 UTC (permalink / raw)
To: 41669
[-- Attachment #1: Type: text/plain, Size: 1810 bytes --]
Hi,
As demonstrated in the following email thread, the powerpc64-linux
bootstrap-tarballs are not reproducible when cross-compiled from an
x86_64-linux system:
https://lists.gnu.org/archive/html/guix-devel/2020-06/msg00003.html
Four people attempted to invoke the following command using Guix commit
8159ce1970d91567468cf1bacac313099a009d2a:
guix build --no-substitutes --target=powerpc64-linux-gnu bootstrap-tarballs
All of the bootstrap tarballs except for gcc-stripped were reproducible.
However, these attempts produced four different versions of
gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz. At least two of the
attempts were performed on two different x86_64-linux systems.
The derivation that produced the differing output was:
/gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
You can build this derivation in a variety of ways, for example:
guix build --target=powerpc64-linux-gnu -e '(@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)'
or just
guix build /gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
On my x86_64-linux system, twice I tried running "guix build --check" on
this derivation, but each time it surprisingly reported no difference.
Out of paranoia, I tried deleting its output with "guix gc --delete",
and then building it again. The new output was, indeed, identical to
the old output. This makes me think that the non-reproducibility is
coming from something outside the immediate build logic of the
gcc-stripped-tarball-5.5.0.drv derivation itself.
I will next try to rebuild everything from scratch again. I will also
try to get copies of the differing outputs from the people involved in
that email thread, in order to run diffoscope on them.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-02 18:59 bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible Chris Marusich
@ 2020-06-03 9:48 ` Chris Marusich
2020-06-03 20:50 ` Vincent Legoll
` (2 more replies)
0 siblings, 3 replies; 45+ messages in thread
From: Chris Marusich @ 2020-06-03 9:48 UTC (permalink / raw)
To: 41669; +Cc: Vincent Legoll, Léo Le Bouter, Maxim Cournoyer
[-- Attachment #1: Type: text/plain, Size: 4040 bytes --]
Hi all,
Chris Marusich <cmmarusich@gmail.com> writes:
> The derivation that produced the differing output was:
>
> /gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
>
> On my x86_64-linux system, twice I tried running "guix build --check" on
> this derivation, but each time it surprisingly reported no difference.
This derivation corresponds to %gcc-bootstrap-tarball from (gnu packages
make-bootstrap), which just creates a tarball of the output of
%gcc-stripped. Therefore, it's not too surprising that it's
reproducible. Similarly, %gcc-stripped just strips some store
references from the output of %gcc-static. The %gcc-static package is
more interesting: it's where we actually build the statically linked
bootstrap GCC (which is then stripped and packed into a tarball as
mentioned above), so I thought that it might be where the
non-determinism is coming from. However, I haven't yet pinpointed the
problem.
If you examine the derivations and their inputs, you'll find that they
depend upon each other in the following order:
guix build --target=powerpc64-linux-gnu -d -e '(@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)'
/gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-stripped)'
/gnu/store/kcv3ja1rfr93hw6ly51878zjhdwpgv7z-gcc-stripped-5.5.0.drv
guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-static)'
/gnu/store/m9hfwppla8lph0vxa15lfkp81s2bbjjs-gcc-static-5.5.0.drv
In other words, gcc-static-5.5.0.drv is an input of
gcc-stripped-5.5.0.drv, which is an input of
gcc-stripped-tarball-5.5.0.drv. Above, I've included example guix
commands you can use to obtain each derivation. Using "guix build
--check", I confirmed that all three of these derivations build
reproducibly on my machine.
I hoped to find more information by invoking "guix build --check" on
every input of gcc-static-5.5.0.drv. When I tried that, what I found
was that all of its inputs build reproducibly except the following two:
/gnu/store/x32cnfkd50fnxs10xp1jdn24h7ai2gxr-guile-3.0.2.drv
/gnu/store/g9fpkg2qa27mka1znqsvx8vxqyabsj2y-gcc-7.5.0.drv
I haven't investigated guile-3.0.2.drv. However, gcc-7.5.0.drv felt
more suspicious to me, and it is actually the derivation that builds
gcc-final from (gnu packages commencement), which you can see via:
guix build -d -e '(@@ (gnu packages commencement) gcc-final)'
Using "guix gc", I deleted the outputs of
gcc-stripped-tarball-5.5.0.drv, gcc-stripped-5.5.0.drv,
gcc-static-5.5.0.drv, and gcc-7.5.0.drv. I then tried building these
four derivations again (without substitutes, the same as before).
Before doing this, I stored the SHA-512 hashes of their output files,
and after the build succeeded, I compared the hashes of the new files
with the previous values. I found that these derivations' newly rebuilt
outputs were identical to their original values, except for
gcc-7.5.0.drv, which produced some different files. Most significantly,
this means that gcc-stripped-tarball-5.5.0.drv produced the exact same
tarball for me as it did the first time I built it, even though some of
its inputs are not themselves reproducible.
At present, it seems possible that within the context of a single
machine, gcc-stripped-tarball-5.5.0.drv builds reproducibly, but on a
different machine, it may (reproducibly) build a different output. I'm
a bit paranoid about making mistakes, so I'll perform another full GC
and then try yet again to build gcc-stripped-tarball-5.5.0.drv in order
to verify whether it truly produces the same output when all (or nearly
all) of its inputs are rebuilt from scratch.
Some people have also shared their differing copies of the binaries on
the email list. It could be productive to compare the contents with
diffoscope, although I suspect the diff might be too large to be useful.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-03 9:48 ` Chris Marusich
@ 2020-06-03 20:50 ` Vincent Legoll
2020-06-10 6:15 ` Chris Marusich
2020-09-13 2:53 ` Chris Marusich
2 siblings, 0 replies; 45+ messages in thread
From: Vincent Legoll @ 2020-06-03 20:50 UTC (permalink / raw)
To: Chris Marusich, 41669; +Cc: Léo Le Bouter, Maxim Cournoyer
Is that showing the same (or a similar) problem :
https://data.guix-patches.cbaines.net/gnu/store/0lcbxpw1vrca02dzpzw2rxhad7pn4zw7-gcc-objc-5.5.0
?
--
Vincent Legoll
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-03 9:48 ` Chris Marusich
2020-06-03 20:50 ` Vincent Legoll
@ 2020-06-10 6:15 ` Chris Marusich
2020-06-10 22:20 ` Bengt Richter
2020-06-11 21:09 ` Jack Hill
2020-09-13 2:53 ` Chris Marusich
2 siblings, 2 replies; 45+ messages in thread
From: Chris Marusich @ 2020-06-10 6:15 UTC (permalink / raw)
To: 41669; +Cc: Vincent Legoll, Léo Le Bouter, Maxim Cournoyer
[-- Attachment #1: Type: text/plain, Size: 26804 bytes --]
Hi Vincent and everyone,
Vincent Legoll <vincent.legoll@gmail.com> writes:
> Is that showing the same (or a similar) problem :
>
> https://data.guix-patches.cbaines.net/gnu/store/0lcbxpw1vrca02dzpzw2rxhad7pn4zw7-gcc-objc-5.5.0
>
> ?
Can you clarify what you mean? I'm not sure what you're referring to.
Chris Marusich <cmmarusich@gmail.com> writes:
> At present, it seems possible that within the context of a single
> machine, gcc-stripped-tarball-5.5.0.drv builds reproducibly, but on a
> different machine, it may (reproducibly) build a different output.
> I'm a bit paranoid about making mistakes, so I'll perform another full
> GC and then try yet again to build gcc-stripped-tarball-5.5.0.drv in
> order to verify whether it truly produces the same output when all (or
> nearly all) of its inputs are rebuilt from scratch.
I repeated the experiment on the same machine (it took a day or two to
build), and the result was the same: on my machine,
gcc-stripped-tarball-5.5.0.drv builds identical output to what it built
before. To be clear, using Guix 8159ce1970d91567468cf1bacac313099a009d2a
on an x86_64-linux machine, I tried (yet again) the following steps:
- I deleted as much as I could from the store using 'guix gc'.
- I explicitly verified that all outputs for the following derivations
no longer existed in the store:
/gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
/gnu/store/kcv3ja1rfr93hw6ly51878zjhdwpgv7z-gcc-stripped-5.5.0.drv
/gnu/store/m9hfwppla8lph0vxa15lfkp81s2bbjjs-gcc-static-5.5.0.drv
/gnu/store/g9fpkg2qa27mka1znqsvx8vxqyabsj2y-gcc-7.5.0.drv
- I then built gcc-stripped-tarball-5.5.0.drv via the following command:
guix build --no-substitutes --check --target=powerpc64-linux-gnu \
-e '(@@ (gnu packages make-bootstrap) %gcc-static)'
This rebuilt basically everything, including gcc-7.5.0.drv and the other
derivations mentioned above. When I checked the built output of the
gcc-stripped-tarball-5.5.0.drv derivation, I found that its SHA-512 hash
was identical to the one I calculated previously, which was:
--8<---------------cut here---------------start------------->8---
8aca7f332a1ba8e3c2225c161a7545b0a04ddd690d164dc97afee9c9ea067b0c49bc155e9f06d285c22e24cdd16d91e59730af5f1dd9efcda13a26bede5948a2 /gnu/store/rsmhiyplmbiqm1qwniiafi4ak76pd61v-gcc-stripped-tarball-5.5.0/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz
--8<---------------cut here---------------end--------------->8---
Anyway, this confirms what we already knew: GCC builds reproducibly on
my machine, but it is different when other people build it on other
machines. I'm now quite convinced of this fact.
Jack and Vincent shared their build results on the email list. For
reference, you can get them here:
https://flashner.co.il/~efraim/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz
https://jackhill.us/misc/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz
https://media.marusich.info/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz
I also received a copy of Vincent's build results via private email. In
short, they all seem to differ in basically the same ways:
--8<---------------cut here---------------start------------->8---
[1] marusich@garuda-lan:~/Documents/notes/guix/ppc/gcc-stripped-tarballs
$ diff -r chris jack
Binary files chris/bin/c++ and jack/bin/c++ differ
Binary files chris/bin/cpp and jack/bin/cpp differ
Binary files chris/bin/g++ and jack/bin/g++ differ
Binary files chris/bin/gcc and jack/bin/gcc differ
Binary files chris/bin/gcov and jack/bin/gcov differ
Binary files chris/bin/gcov-dump and jack/bin/gcov-dump differ
Binary files chris/bin/gcov-tool and jack/bin/gcov-tool differ
Binary files chris/bin/powerpc64-linux-gnu-c++ and jack/bin/powerpc64-linux-gnu-c++ differ
Binary files chris/bin/powerpc64-linux-gnu-g++ and jack/bin/powerpc64-linux-gnu-g++ differ
Binary files chris/bin/powerpc64-linux-gnu-gcc and jack/bin/powerpc64-linux-gnu-gcc differ
Binary files chris/bin/powerpc64-linux-gnu-gcc-5.5.0 and jack/bin/powerpc64-linux-gnu-gcc-5.5.0 differ
Binary files chris/lib/libstdc++.a and jack/lib/libstdc++.a differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 and jack/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus and jack/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 and jack/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper and jack/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper differ
[1] marusich@garuda-lan:~/Documents/notes/guix/ppc/gcc-stripped-tarballs
$ diff -r chris vincent
Binary files chris/bin/c++ and vincent/bin/c++ differ
Binary files chris/bin/cpp and vincent/bin/cpp differ
Binary files chris/bin/g++ and vincent/bin/g++ differ
Binary files chris/bin/gcc and vincent/bin/gcc differ
Binary files chris/bin/gcov and vincent/bin/gcov differ
Binary files chris/bin/gcov-dump and vincent/bin/gcov-dump differ
Binary files chris/bin/gcov-tool and vincent/bin/gcov-tool differ
Binary files chris/bin/powerpc64-linux-gnu-c++ and vincent/bin/powerpc64-linux-gnu-c++ differ
Binary files chris/bin/powerpc64-linux-gnu-g++ and vincent/bin/powerpc64-linux-gnu-g++ differ
Binary files chris/bin/powerpc64-linux-gnu-gcc and vincent/bin/powerpc64-linux-gnu-gcc differ
Binary files chris/bin/powerpc64-linux-gnu-gcc-5.5.0 and vincent/bin/powerpc64-linux-gnu-gcc-5.5.0 differ
Binary files chris/lib/libstdc++.a and vincent/lib/libstdc++.a differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 and vincent/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus and vincent/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 and vincent/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper and vincent/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper differ
[1] marusich@garuda-lan:~/Documents/notes/guix/ppc/gcc-stripped-tarballs
$ diff -r chris efraim
Binary files chris/bin/c++ and efraim/bin/c++ differ
Binary files chris/bin/cpp and efraim/bin/cpp differ
Binary files chris/bin/g++ and efraim/bin/g++ differ
Binary files chris/bin/gcc and efraim/bin/gcc differ
Binary files chris/bin/gcov and efraim/bin/gcov differ
Binary files chris/bin/gcov-dump and efraim/bin/gcov-dump differ
Binary files chris/bin/gcov-tool and efraim/bin/gcov-tool differ
Binary files chris/bin/powerpc64-linux-gnu-c++ and efraim/bin/powerpc64-linux-gnu-c++ differ
Binary files chris/bin/powerpc64-linux-gnu-g++ and efraim/bin/powerpc64-linux-gnu-g++ differ
Binary files chris/bin/powerpc64-linux-gnu-gcc and efraim/bin/powerpc64-linux-gnu-gcc differ
Binary files chris/bin/powerpc64-linux-gnu-gcc-5.5.0 and efraim/bin/powerpc64-linux-gnu-gcc-5.5.0 differ
diff -r chris/lib/gcc/powerpc64-linux-gnu/5.5.0/include-fixed/bits/statx.h efraim/lib/gcc/powerpc64-linux-gnu/5.5.0/include-fixed/bits/statx.h
5c5
< "/gnu/store/fa6wj5bxkj5ll1d7292a70knmyl7a0cr-glibc-2.31/include/bits/statx.h"
---
> "/gnu/store/cb88z63hyg1icd2kkahiink2p291mhr2-glibc-2.31/include/bits/statx.h"
Binary files chris/lib/libstdc++.a and efraim/lib/libstdc++.a differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 and efraim/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus and efraim/libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 and efraim/libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2 differ
Binary files chris/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper and efraim/libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper differ
[1] marusich@garuda-lan:~/Documents/notes/guix/ppc/gcc-stripped-tarballs
$
--8<---------------cut here---------------end--------------->8---
Efraim's diff looks a little different in statx.h, even though he used
the same Guix commit as me. Maybe this is because he cross-compiled on
an aarch64-linux machine, while I cross-compiled on an x86_64-linux
machine. In the other cases, it looks like the binary files differ in
basically the same ways. I will share some examples below.
Here is some diffoscope output between my c++ and Efraim's (many other
sections also differed in similarly cryptic ways):
--8<---------------cut here---------------start------------->8---
diffoscope chris/bin/c++ efraim/bin/c++
...
├── /gnu/store/xakj5dgs1729297nv50s84sdmq2jiz64-binutils-2.34/bin/readelf --wide --symbols {}
│ @@ -328,18 +328,18 @@
│ 324: 00000000101aece0 152 FUNC LOCAL DEFAULT 19 check_free.isra.0
│ 325: 00000000101aed28 24 FUNC LOCAL DEFAULT 19 fini
│ 326: 00000000101b6008 8 OBJECT LOCAL DEFAULT 24 static_buf
│ 327: 00000000101b6010 32 OBJECT LOCAL DEFAULT 24 last_result
│ 328: 00000000101b6030 4 OBJECT LOCAL DEFAULT 24 key
│ 329: 00000000101b6034 4 OBJECT LOCAL DEFAULT 24 once
│ 330: 00000000101b23b8 104 OBJECT LOCAL DEFAULT 22 _dlfcn_hooks
│ - 331: 00000000101a98f8 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool4freeEPv.constprop.2
│ - 332: 00000000101a9910 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool8allocateEm.constprop.3
│ - 333: 00000000101a99a0 180 FUNC LOCAL DEFAULT 19 _GLOBAL__sub_I_eh_alloc.cc
│ - 334: 00000000101b4f68 64 OBJECT LOCAL DEFAULT 24 _ZN12_GLOBAL__N_114emergency_poolE
│ + 331: 00000000101a9880 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool4freeEPv.constprop.2
│ + 332: 00000000101a9898 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool8allocateEm.constprop.3
│ + 333: 00000000101a9928 180 FUNC LOCAL DEFAULT 19 _GLOBAL__sub_I_eh_alloc.cc
│ + 334: 00000000101b4f78 64 OBJECT LOCAL DEFAULT 24 _ZN12_GLOBAL__N_114emergency_poolE
│ 335: 000000001011c5a8 19 OBJECT LOCAL DEFAULT 7 _ZZ18ggc_internal_allocmPFvPvEmmE12__FUNCTION__
│ 336: 000000001011c5c0 27 OBJECT LOCAL DEFAULT 7 _ZZ26ggc_internal_cleared_allocmPFvPvEmmE12__FUNCTION__
│ 337: 000000001011c600 21 OBJECT LOCAL DEFAULT 7 _ZZ20lang_specific_driverPP17cl_decoded_optionPjPiE12__FUNCTION__
│ 338: 00000000101a42d0 228 FUNC LOCAL DEFAULT 19 _ZL12elf_platformv
│ 339: 00000000101a42e8 236 FUNC LOCAL DEFAULT 19 _ZL15elf_dcachebsizev
│ 340: 00000000101a4300 164 FUNC LOCAL DEFAULT 19 _ZL14describe_cachejjjj.isra.0.constprop.1
│ 341: 000000001011c6b8 752 OBJECT LOCAL DEFAULT 7 _ZL9asm_names
...
│ @@ -1379,25 +1379,25 @@
│ 1375: 00000000101b2448 0 SECTION LOCAL DEFAULT 23
│ 1376: 00000000101b2b80 0 SECTION LOCAL DEFAULT 24
│ 1377: 00000000101b6860 0 SECTION LOCAL DEFAULT 25
│ 1378: 0000000000000000 0 SECTION LOCAL DEFAULT 26
│ 1379: 0000000000000000 0 SECTION LOCAL DEFAULT 27
│ 1380: 00000000101a2a28 752 OBJECT GLOBAL DEFAULT 18 _nl_C_LC_CTYPE
│ 1381: 00000000101ace20 56 IFUNC GLOBAL DEFAULT 19 __libc_strcspn
│ - 1382: 00000000101a9958 100 FUNC GLOBAL DEFAULT 19 __cxa_free_exception
│ + 1382: 00000000101a98e0 100 FUNC GLOBAL DEFAULT 19 __cxa_free_exception
│ 1383: 00000000101acfe8 104 FUNC WEAK DEFAULT 19 stpcpy
│ 1384: 00000000101ab7e8 516 FUNC GLOBAL DEFAULT 19 putchar
│ - 1385: 00000000101a9598 20 FUNC GLOBAL DEFAULT 19 _ZNKSt9type_info15__is_function_pEv
│ + 1385: 00000000101a9778 20 FUNC GLOBAL DEFAULT 19 _ZNKSt9type_info15__is_function_pEv
│ 1386: 000000001016a3cc 76 OBJECT GLOBAL DEFAULT 7 _nl_C_LC_CTYPE_class_print
│ 1387: 00000000101adfc0 640 FUNC WEAK DEFAULT 19 tsearch
│ 1388: 00000000101af0a0 176 FUNC WEAK DEFAULT 19 clock_gettime
│ 1389: 00000000101a4150 4856 FUNC GLOBAL DEFAULT 19 _ZNK6driver12set_up_specsEv
│ 1390: 00000000101a9268 88 FUNC GLOBAL DEFAULT 19 xmalloc
│ 1391: 00000000101b1d68 8 OBJECT GLOBAL DEFAULT 22 __morecore
│ - 1392: 00000000101a9568 40 FUNC GLOBAL DEFAULT 19 _ZSt10unexpectedv
│ + 1392: 00000000101a94f0 40 FUNC GLOBAL DEFAULT 19 _ZSt10unexpectedv
│ 1393: 00000000101a8ef0 60 FUNC GLOBAL DEFAULT 19 lbasename
│ 1394: 00000000101aded0 96 FUNC GLOBAL DEFAULT 19 __getdtablesize
│ 1395: 00000000101a4348 752 FUNC GLOBAL DEFAULT 19 update_path
...
├── /gnu/store/xakj5dgs1729297nv50s84sdmq2jiz64-binutils-2.34/bin/readelf --wide --decompress --hex-dump=.data.rel.ro {}
│ @@ -112,27 +112,27 @@
│ 0x101a1718 00000000 10164560 00000009 00000001 ......E`........
│ 0x101a1728 00000000 10164570 00000000 10164578 ......Ep......Ex
│ 0x101a1738 0000000c 00000002 00000000 101499e8 ................
│ 0x101a1748 00000000 10116018 00000001 00000001 ......`.........
│ 0x101a1758 00000000 10164588 00000000 10164590 ......E.......E.
│ 0x101a1768 00000007 00000001 00000000 10119850 ...............P
│ 0x101a1778 00000000 1015e290 00000002 00000002 ................
│ - 0x101a1788 00000000 101641c0 00000000 101653e8 ......A.......S.
│ + 0x101a1788 00000000 101641c0 00000000 101653a8 ......A.......S.
│ 0x101a1798 00000001 00000002 00000000 10164598 ..............E.
│ 0x101a17a8 00000000 10117df0 00000001 00000002 ......}.........
│ 0x101a17b8 00000000 101645a0 00000000 1015e238 ......E........8
│ 0x101a17c8 00000002 00000002 00000000 101645a8 ..............E.
│ 0x101a17d8 00000000 101631d8 00000001 00000002 ......1.........
│ 0x101a17e8 00000000 101645b0 00000000 1015e1e0 ......E.........
│ - 0x101a17f8 00000002 00000002 00000000 101653c0 ..............S.
│ + 0x101a17f8 00000002 00000002 00000000 10165380 ..............S.
│ 0x101a1808 00000000 1015e268 00000003 00000003 .......h........
│ - 0x101a1818 00000000 101653c8 00000000 1015e268 ......S........h
│ - 0x101a1828 00000003 00000003 00000000 101653d0 ..............S.
│ + 0x101a1818 00000000 10165388 00000000 1015e268 ......S........h
│ + 0x101a1828 00000003 00000003 00000000 10165390 ..............S.
│ 0x101a1838 00000000 1015e268 00000003 00000002 .......h........
│ - 0x101a1848 00000000 101653d8 00000000 1015e268 ......S........h
│ + 0x101a1848 00000000 10165398 00000000 1015e268 ......S........h
│ 0x101a1858 00000003 00000002 00000000 10144ea8 ..............N.
│ 0x101a1868 00000000 1015e1f0 00000002 00000002 ................
...
--8<---------------cut here---------------end--------------->8---
Here is some diffoscope output betweeen my c++ and Jack's (many other
sections also differed in similarly cryptic ways):
--8<---------------cut here---------------start------------->8---
diffoscope chris/bin/c++ jack/bin/c++
...
├── /gnu/store/xakj5dgs1729297nv50s84sdmq2jiz64-binutils-2.34/bin/readelf --wide --symbols {}
│ @@ -328,17 +328,17 @@
│ 324: 00000000101aece0 152 FUNC LOCAL DEFAULT 19 check_free.isra.0
│ 325: 00000000101aed28 24 FUNC LOCAL DEFAULT 19 fini
│ 326: 00000000101b6008 8 OBJECT LOCAL DEFAULT 24 static_buf
│ 327: 00000000101b6010 32 OBJECT LOCAL DEFAULT 24 last_result
│ 328: 00000000101b6030 4 OBJECT LOCAL DEFAULT 24 key
│ 329: 00000000101b6034 4 OBJECT LOCAL DEFAULT 24 once
│ 330: 00000000101b23b8 104 OBJECT LOCAL DEFAULT 22 _dlfcn_hooks
│ - 331: 00000000101a98f8 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool4freeEPv.constprop.2
│ - 332: 00000000101a9910 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool8allocateEm.constprop.3
│ - 333: 00000000101a99a0 180 FUNC LOCAL DEFAULT 19 _GLOBAL__sub_I_eh_alloc.cc
│ + 331: 00000000101a94c0 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool4freeEPv.constprop.2
│ + 332: 00000000101a94d8 524 FUNC LOCAL DEFAULT 19 _ZN12_GLOBAL__N_14pool8allocateEm.constprop.3
│ + 333: 00000000101a9568 180 FUNC LOCAL DEFAULT 19 _GLOBAL__sub_I_eh_alloc.cc
│ 334: 00000000101b4f68 64 OBJECT LOCAL DEFAULT 24 _ZN12_GLOBAL__N_114emergency_poolE
│ 335: 000000001011c5a8 19 OBJECT LOCAL DEFAULT 7 _ZZ18ggc_internal_allocmPFvPvEmmE12__FUNCTION__
│ 336: 000000001011c5c0 27 OBJECT LOCAL DEFAULT 7 _ZZ26ggc_internal_cleared_allocmPFvPvEmmE12__FUNCTION__
│ 337: 000000001011c600 21 OBJECT LOCAL DEFAULT 7 _ZZ20lang_specific_driverPP17cl_decoded_optionPjPiE12__FUNCTION__
│ 338: 00000000101a42d0 228 FUNC LOCAL DEFAULT 19 _ZL12elf_platformv
│ 339: 00000000101a42e8 236 FUNC LOCAL DEFAULT 19 _ZL15elf_dcachebsizev
│ 340: 00000000101a4300 164 FUNC LOCAL DEFAULT 19 _ZL14describe_cachejjjj.isra.0.constprop.1
...
├── /gnu/store/xakj5dgs1729297nv50s84sdmq2jiz64-binutils-2.34/bin/readelf --wide --decompress --hex-dump=.data.rel.ro {}
│ @@ -206,60 +206,60 @@
│ 0x101a1cf8 00000000 101a3b08 00000000 10118108 ......;.........
│ 0x101a1d08 00000000 101a4120 00000000 10118120 ......A .......
│ 0x101a1d18 00000000 101a4108 00000000 10115758 ......A.......WX
│ 0x101a1d28 00000000 101a3a60 00000000 10118138 ......:`.......8
│ 0x101a1d38 00000000 101a3a48 00000000 10115ae8 ......:H......Z.
│ 0x101a1d48 00000000 101a3c10 00000000 10118150 ......<........P
│ 0x101a1d58 00000000 101a4318 00000000 00000000 ......C.........
│ - 0x101a1d68 00000000 00000000 00000000 101a1dd8 ................
│ - 0x101a1d78 00000000 101650d0 00000000 101a1e70 ......P........p
│ - 0x101a1d88 00000000 00000000 00000000 101a1d70 ...............p
│ - 0x101a1d98 00000000 101a9388 00000000 101a93a0 ................
│ - 0x101a1da8 00000000 101a9370 00000000 101a1dd8 .......p........
│ - 0x101a1db8 00000000 101650f0 00000000 101a1fd8 ......P.........
│ - 0x101a1dc8 00000000 00000000 00000000 101a1db0 ................
│ - 0x101a1dd8 00000000 101a93d0 00000000 101a93e8 ................
│ - 0x101a1de8 00000000 101a9598 00000000 101a9598 ................
│ - 0x101a1df8 00000000 101a9b20 00000000 101a9a90 ....... ........
│ - 0x101a1e08 00000000 101a9430 00000000 101a9418 .......0........
│ - 0x101a1e18 00000000 101a9400 00000000 101a2000 .............. .
│ - 0x101a1e28 00000000 10165118 00000000 00000000 ......Q.........
│ - 0x101a1e38 00000000 101a1e20 00000000 101a9580 ....... ........
│ - 0x101a1e48 00000000 101a95c8 00000000 101a9598 ................
│ - 0x101a1e58 00000000 101a9598 00000000 101a95e0 ................
│ - 0x101a1e68 00000000 101a95b0 00000000 101a2000 .............. .
│ - 0x101a1e78 00000000 10165128 00000000 101a1dd8 ......Q(........
│ - 0x101a1e88 00000000 10165138 00000000 101a1e70 ......Q8.......p
│ - 0x101a1e98 00000000 101a2000 00000000 10165150 ...... .......QP
│ - 0x101a1ea8 00000000 101a2000 00000000 10165170 ...... .......Qp
│ - 0x101a1eb8 00000000 00000000 00000000 101a1e70 ...............p
│ - 0x101a1ec8 00000000 101a96e8 00000000 101a9748 ...............H
│ - 0x101a1ed8 00000000 101a9718 00000000 00000000 ................
│ - 0x101a1ee8 00000000 101a1e80 00000000 101a9700 ................
│ - 0x101a1ef8 00000000 101a9760 00000000 101a9730 .......`.......0
│ - 0x101a1f08 00000000 00000000 00000000 101a1e98 ................
│ - 0x101a1f18 00000000 00000000 00000000 00000000 ................
│ - 0x101a1f28 00000000 101a99b8 00000000 00000000 ................
│ - 0x101a1f38 00000000 101a1ea8 00000000 00000000 ................
│ - 0x101a1f48 00000000 00000000 00000000 101a99b8 ................
│ - 0x101a1f58 00000000 101a1dd8 00000000 101651c0 ..............Q.
│ - 0x101a1f68 00000000 101a1e70 00000000 101a1dd8 .......p........
│ - 0x101a1f78 00000000 101651e8 00000000 101a1e70 ......Q........p
│ - 0x101a1f88 00000000 00000000 00000000 101a1f58 ...............X
│ - 0x101a1f98 00000000 101a9880 00000000 101a98b0 ................
│ - 0x101a1fa8 00000000 101a9850 00000000 00000000 .......P........
│ - 0x101a1fb8 00000000 101a1f70 00000000 101a9898 .......p........
│ - 0x101a1fc8 00000000 101a98c8 00000000 101a9868 ...............h
│ - 0x101a1fd8 00000000 101a1dd8 00000000 101652a8 ..............R.
│ - 0x101a1fe8 00000000 101a1e20 00000000 00000000 ....... ........
│ - 0x101a1ff8 00000000 101a1fd8 00000000 101a9ac0 ................
│ - 0x101a2008 00000000 101a9ad8 00000000 101a9598 ................
│ - 0x101a2018 00000000 101a9598 00000000 101a9b20 ...............
│ - 0x101a2028 00000000 101a9a90 00000000 101a9b08 ................
│ - 0x101a2038 00000000 101a9af0 00000000 101a9aa8 ................
│ + 0x101a1d68 00000000 00000000 00000000 101a1f40 ...............@
│ + 0x101a1d78 00000000 101650d0 00000000 101a1e30 ......P........0
│ + 0x101a1d88 00000000 101a1f40 00000000 101650f8 .......@......P.
│ + 0x101a1d98 00000000 101a1e30 00000000 00000000 .......0........
│ + 0x101a1da8 00000000 101a1d70 00000000 101a9448 .......p.......H
│ + 0x101a1db8 00000000 101a9478 00000000 101a9418 .......x........
│ + 0x101a1dc8 00000000 00000000 00000000 101a1d88 ................
│ + 0x101a1dd8 00000000 101a9460 00000000 101a9490 .......`........
│ + 0x101a1de8 00000000 101a9430 00000000 101a1f40 .......0.......@
│ + 0x101a1df8 00000000 10165178 00000000 101a1e30 ......Qx.......0
│ + 0x101a1e08 00000000 00000000 00000000 101a1df0 ................
│ + 0x101a1e18 00000000 101a9610 00000000 101a9628 ...............(
│ + 0x101a1e28 00000000 101a95f8 00000000 101a1fb0 ................
│ + 0x101a1e38 00000000 10165198 00000000 101a1f40 ......Q........@
│ + 0x101a1e48 00000000 101651a8 00000000 101a1e30 ......Q........0
│ + 0x101a1e58 00000000 101a1fb0 00000000 101651c0 ..............Q.
│ + 0x101a1e68 00000000 101a1fb0 00000000 101651e0 ..............Q.
│ + 0x101a1e78 00000000 00000000 00000000 101a1e30 ...............0
│ + 0x101a1e88 00000000 101a9760 00000000 101a97c0 .......`........
│ + 0x101a1e98 00000000 101a9790 00000000 00000000 ................
│ + 0x101a1ea8 00000000 101a1e40 00000000 101a9778 .......@.......x
│ + 0x101a1eb8 00000000 101a97d8 00000000 101a97a8 ................
│ + 0x101a1ec8 00000000 00000000 00000000 101a1e58 ...............X
│ + 0x101a1ed8 00000000 00000000 00000000 00000000 ................
│ + 0x101a1ee8 00000000 101a98b0 00000000 00000000 ................
│ + 0x101a1ef8 00000000 101a1e68 00000000 00000000 .......h........
│ + 0x101a1f08 00000000 00000000 00000000 101a98b0 ................
│ + 0x101a1f18 00000000 101a1f40 00000000 10165270 .......@......Rp
│ + 0x101a1f28 00000000 101a1f88 00000000 00000000 ................
│ + 0x101a1f38 00000000 101a1f18 00000000 101a98e0 ................
│ + 0x101a1f48 00000000 101a98f8 00000000 101a9af0 ................
│ + 0x101a1f58 00000000 101a9af0 00000000 101a9ac0 ................
│ + 0x101a1f68 00000000 101a9a30 00000000 101a9940 .......0.......@
│ + 0x101a1f78 00000000 101a9928 00000000 101a9910 .......(........
│ + 0x101a1f88 00000000 101a1f40 00000000 10165298 .......@......R.
│ + 0x101a1f98 00000000 101a1ff8 00000000 00000000 ................
│ + 0x101a1fa8 00000000 101a1f88 00000000 101a9a60 ...............`
│ + 0x101a1fb8 00000000 101a9a78 00000000 101a9af0 .......x........
│ + 0x101a1fc8 00000000 101a9af0 00000000 101a9ac0 ................
│ + 0x101a1fd8 00000000 101a9a30 00000000 101a9aa8 .......0........
│ + 0x101a1fe8 00000000 101a9a90 00000000 101a9a48 ...............H
│ + 0x101a1ff8 00000000 101a1fb0 00000000 101652c0 ..............R.
│ + 0x101a2008 00000000 00000000 00000000 101a1ff8 ................
│ + 0x101a2018 00000000 101a9ad8 00000000 101a9b20 ...............
│ + 0x101a2028 00000000 101a9af0 00000000 101a9af0 ................
│ + 0x101a2038 00000000 101a9b38 00000000 101a9b08 .......8........
│ 0x101a2048 00000000 10165a28 00000000 101aa888 ......Z(........
│ 0x101a2058 00000000 00000000 04040404 00000000 ................
│ 0x101a2068 00000000 10165a38 00000000 101aa8a0 ......Z8........
│ 0x101a2078 00000000 00000000 04040404 00000000 ................
│ 0x101a2088 00000000 10165a58 00000000 101aa8b8 ......ZX........
│ 0x101a2098 00000000 00000000 04040404 00000000 ................
│ 0x101a20a8 00000000 10165a70 00000000 101aa8d0 ......Zp........
--8<---------------cut here---------------end--------------->8---
If I'm reading this correctly, one problem seems to be that our GCC
toolchains are putting symbols at different locations. This issue (and
maybe others) could be trickling down, causing other aspects of the
binaries to differ (e.g., in length). Nothing really stands out, but
when we discussed this on IRC, we thought perhaps factors like the
following might contribute to the non-reproducibility:
- Perhaps we are all running different Linux kernel versions? In some
cases, the kernel version can unfortunately influence the build
output, so this might be worth testing.
- Perhaps the GCC Makefiles etc. are doing something non-deterministic?
- Something else?
Avenues of investigation:
- If anything obvious stands out from the diffoscope output, please
leave a comment.
- Try building with different kernel versions on the same machine, to
see if they differ.
- If somebody else could please confirm that running the following
command reports no difference on their own machine (i.e., exit code
0), that would be good to know, since it would help further solidify
the theory that on a single machine, the build of gcc-static-5.5.0.drv
is reproducible, even if it is not reproducible across machines:
guix build --no-substitutes --check --target=powerpc64-linux-gnu \
-e '(@@ (gnu packages make-bootstrap) %gcc-static)'
- Try building two different versions of gcc-7.5.0 (maybe by hand?), and
then use them to build a simple reproduction case and compare results.
If we're lucky, maybe this will help us understand the problem better.
We'll get there!
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-10 6:15 ` Chris Marusich
@ 2020-06-10 22:20 ` Bengt Richter
2020-06-11 21:09 ` Jack Hill
1 sibling, 0 replies; 45+ messages in thread
From: Bengt Richter @ 2020-06-10 22:20 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
Hi Chris, et al,
On +2020-06-09 23:15:01 -0700, Chris Marusich wrote:
> Hi Vincent and everyone,
>
> Vincent Legoll <vincent.legoll@gmail.com> writes:
>
> > Is that showing the same (or a similar) problem :
> >
> > https://data.guix-patches.cbaines.net/gnu/store/0lcbxpw1vrca02dzpzw2rxhad7pn4zw7-gcc-objc-5.5.0
> >
> > ?
>
> Can you clarify what you mean? I'm not sure what you're referring to.
>
> Chris Marusich <cmmarusich@gmail.com> writes:
>
> > At present, it seems possible that within the context of a single
> > machine, gcc-stripped-tarball-5.5.0.drv builds reproducibly, but on a
> > different machine, it may (reproducibly) build a different output.
> > I'm a bit paranoid about making mistakes, so I'll perform another full
> > GC and then try yet again to build gcc-stripped-tarball-5.5.0.drv in
> > order to verify whether it truly produces the same output when all (or
> > nearly all) of its inputs are rebuilt from scratch.
>
> I repeated the experiment on the same machine (it took a day or two to
> build), and the result was the same: on my machine,
> gcc-stripped-tarball-5.5.0.drv builds identical output to what it built
> before. To be clear, using Guix 8159ce1970d91567468cf1bacac313099a009d2a
> on an x86_64-linux machine, I tried (yet again) the following steps:
>
[...]
> Efraim's diff looks a little different in statx.h, even though he used
> the same Guix commit as me. Maybe this is because he cross-compiled on
> an aarch64-linux machine, while I cross-compiled on an x86_64-linux
> machine. In the other cases, it looks like the binary files differ in
> basically the same ways. I will share some examples below.
>
> Here is some diffoscope output between my c++ and Efraim's (many other
> sections also differed in similarly cryptic ways):
>
[...]
>
> If I'm reading this correctly, one problem seems to be that our GCC
> toolchains are putting symbols at different locations. This issue (and
> maybe others) could be trickling down, causing other aspects of the
> binaries to differ (e.g., in length). Nothing really stands out, but
> when we discussed this on IRC, we thought perhaps factors like the
> following might contribute to the non-reproducibility:
>
> - Perhaps we are all running different Linux kernel versions? In some
> cases, the kernel version can unfortunately influence the build
> output, so this might be worth testing.
>
> - Perhaps the GCC Makefiles etc. are doing something non-deterministic?
>
Questions triggered in my mind:
Where are respective machines getting their rules for packing and
aligning structs and unions?
Is any struct or rule/flags source dynamically generated, where different
rules could come from different defaults, or .configs, or even invalid
memoizations jumping domains?
Could pointer arithmetic get done in one domain and the offset be
misused in another? Wrong C preprocessor?
Difference in sort key comparisons for canonicalization of ordering?
Hope that's not all red herrings :)
Sorry for the noise otherwise.
> - Something else?
Hm, some race condition between processes that should be order-independent
but are not.
Then if different hardware components on different systems -- disks, memory,
processors -- cause different but repeatable patterns of waits (convoying?)
you could get repeatable but different builds.
I guess you'd have to figure out which order was really right, and force
the order of processing explicitly to that order, so all systems would
do it that way.
>
> Avenues of investigation:
>
> - If anything obvious stands out from the diffoscope output, please
> leave a comment.
>
> - Try building with different kernel versions on the same machine, to
> see if they differ.
>
> - If somebody else could please confirm that running the following
> command reports no difference on their own machine (i.e., exit code
> 0), that would be good to know, since it would help further solidify
> the theory that on a single machine, the build of gcc-static-5.5.0.drv
> is reproducible, even if it is not reproducible across machines:
>
> guix build --no-substitutes --check --target=powerpc64-linux-gnu \
> -e '(@@ (gnu packages make-bootstrap) %gcc-static)'
>
> - Try building two different versions of gcc-7.5.0 (maybe by hand?), and
> then use them to build a simple reproduction case and compare results.
> If we're lucky, maybe this will help us understand the problem better.
>
> We'll get there!
>
> --
> Chris
--
Regards,
Bengt Richter
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-10 6:15 ` Chris Marusich
2020-06-10 22:20 ` Bengt Richter
@ 2020-06-11 21:09 ` Jack Hill
1 sibling, 0 replies; 45+ messages in thread
From: Jack Hill @ 2020-06-11 21:09 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
On Tue, 9 Jun 2020, Chris Marusich wrote:
> - Try building with different kernel versions on the same machine, to
> see if they differ.
I've done the rebuild after updated from Linux 5.4.41 to 5.4.45, and go
identical results to my previous build. I am using a different kernel
configuration than Guix's default kernel, but it was the same between the
builds.
Best,
Jack
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-06-03 9:48 ` Chris Marusich
2020-06-03 20:50 ` Vincent Legoll
2020-06-10 6:15 ` Chris Marusich
@ 2020-09-13 2:53 ` Chris Marusich
2020-09-13 6:28 ` Efraim Flashner
2 siblings, 1 reply; 45+ messages in thread
From: Chris Marusich @ 2020-09-13 2:53 UTC (permalink / raw)
To: 41669; +Cc: Vincent Legoll, Léo Le Bouter, Maxim Cournoyer
[-- Attachment #1: Type: text/plain, Size: 3320 bytes --]
Hi everyone,
Chris Marusich <cmmarusich@gmail.com> writes:
> If you examine the derivations and their inputs, you'll find that they
> depend upon each other in the following order:
>
> guix build --target=powerpc64-linux-gnu -d -e '(@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)'
> /gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
>
> guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-stripped)'
> /gnu/store/kcv3ja1rfr93hw6ly51878zjhdwpgv7z-gcc-stripped-5.5.0.drv
>
> guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-static)'
> /gnu/store/m9hfwppla8lph0vxa15lfkp81s2bbjjs-gcc-static-5.5.0.drv
>
> In other words, gcc-static-5.5.0.drv is an input of
> gcc-stripped-5.5.0.drv, which is an input of
> gcc-stripped-tarball-5.5.0.drv. Above, I've included example guix
> commands you can use to obtain each derivation. Using "guix build
> --check", I confirmed that all three of these derivations build
> reproducibly on my machine.
After further experimentation, I've discovered that %gcc-static, when
built as shown above (without the -d option, of course), produces
different output on Debian than on Fedora.
Specifically, the %gcc-static output contains a file named libstdc++.a.
This file is an archive file. Although its members are
content-identical in the case of Fedora and Debian, the order of the
members in the archive differs. Because the exact same inputs were
used, it seems very likely that a difference in the Guix build
environment caused the %gcc-static build logic to order the members of
libstdc++.a differently.
I built %gcc-static using Guix commit
a02b2f8b86c0227eb69aa24b4373aef456365334. Both Debian and Fedora were
x86_64-linux systems. I took the following steps to make absolutely
certain that the exact same inputs were used on Debian and Fedora:
- I provisioned two fresh EC2 instances (Debian and Fedora).
- I installed Guix on Debian.
- I did "guix pull" on Debian to get to the aforementioned commit.
- I built %gcc-static on Debian as indicated above.
- I manually copied the Guix store and the Guix database from Debian to
Fedora.
- I manually fixed up Fedora so it could run Guix (I created the guix
users, added a systemd unit file, disabled selinux, etc.).
- I manually verified the Guix version and the store contents were
identical on Fedora and Debian.
- I GC'd %gcc-static (and nothing else) on Fedora.
- I rebuilt %gcc-static on Fedora.
- I compared the Fedora %gcc-static output to the Debian %gcc-static
output.
The %gcc-static package uses GCC 5.5.0 as its source. I got a copy of
the GCC 5.5.0 source code, and I looked at it. However, it's complex.
I can't pinpoint where they actually build the libstdc++.a file. Can
anyone point me to the code that does this in the GCC 5.5.0 source? I
expected to find the logic hiding in a makefile or a configure script or
something, but I haven't found it yet.
Since this is an old GCC, it is possible that this was a known
reproducibility bug which has since been fixed. I haven't looked into
that possibility yet. If that's the case, though, it would be nice
because we could simply backport a fix.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-09-13 2:53 ` Chris Marusich
@ 2020-09-13 6:28 ` Efraim Flashner
2020-09-26 6:52 ` Chris Marusich
0 siblings, 1 reply; 45+ messages in thread
From: Efraim Flashner @ 2020-09-13 6:28 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 3867 bytes --]
On Sat, Sep 12, 2020 at 07:53:04PM -0700, Chris Marusich wrote:
> Hi everyone,
>
> Chris Marusich <cmmarusich@gmail.com> writes:
>
> > If you examine the derivations and their inputs, you'll find that they
> > depend upon each other in the following order:
> >
> > guix build --target=powerpc64-linux-gnu -d -e '(@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)'
> > /gnu/store/pygln3lr6qbxcps3kmn3w4bc0d0nlpd3-gcc-stripped-tarball-5.5.0.drv
> >
> > guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-stripped)'
> > /gnu/store/kcv3ja1rfr93hw6ly51878zjhdwpgv7z-gcc-stripped-5.5.0.drv
> >
> > guix build --target=powerpc64-linux-gnu -d -e '(@@ (gnu packages make-bootstrap) %gcc-static)'
> > /gnu/store/m9hfwppla8lph0vxa15lfkp81s2bbjjs-gcc-static-5.5.0.drv
> >
> > In other words, gcc-static-5.5.0.drv is an input of
> > gcc-stripped-5.5.0.drv, which is an input of
> > gcc-stripped-tarball-5.5.0.drv. Above, I've included example guix
> > commands you can use to obtain each derivation. Using "guix build
> > --check", I confirmed that all three of these derivations build
> > reproducibly on my machine.
>
> After further experimentation, I've discovered that %gcc-static, when
> built as shown above (without the -d option, of course), produces
> different output on Debian than on Fedora.
>
> Specifically, the %gcc-static output contains a file named libstdc++.a.
> This file is an archive file. Although its members are
> content-identical in the case of Fedora and Debian, the order of the
> members in the archive differs. Because the exact same inputs were
> used, it seems very likely that a difference in the Guix build
> environment caused the %gcc-static build logic to order the members of
> libstdc++.a differently.
>
> I built %gcc-static using Guix commit
> a02b2f8b86c0227eb69aa24b4373aef456365334. Both Debian and Fedora were
> x86_64-linux systems. I took the following steps to make absolutely
> certain that the exact same inputs were used on Debian and Fedora:
>
> - I provisioned two fresh EC2 instances (Debian and Fedora).
>
> - I installed Guix on Debian.
>
> - I did "guix pull" on Debian to get to the aforementioned commit.
>
> - I built %gcc-static on Debian as indicated above.
>
> - I manually copied the Guix store and the Guix database from Debian to
> Fedora.
>
> - I manually fixed up Fedora so it could run Guix (I created the guix
> users, added a systemd unit file, disabled selinux, etc.).
>
> - I manually verified the Guix version and the store contents were
> identical on Fedora and Debian.
>
> - I GC'd %gcc-static (and nothing else) on Fedora.
>
> - I rebuilt %gcc-static on Fedora.
>
> - I compared the Fedora %gcc-static output to the Debian %gcc-static
> output.
>
> The %gcc-static package uses GCC 5.5.0 as its source. I got a copy of
> the GCC 5.5.0 source code, and I looked at it. However, it's complex.
> I can't pinpoint where they actually build the libstdc++.a file. Can
> anyone point me to the code that does this in the GCC 5.5.0 source? I
> expected to find the logic hiding in a makefile or a configure script or
> something, but I haven't found it yet.
>
> Since this is an old GCC, it is possible that this was a known
> reproducibility bug which has since been fixed. I haven't looked into
> that possibility yet. If that's the case, though, it would be nice
> because we could simply backport a fix.
>
> --
> Chris
Is this a file we actually need during the bootstrap process? Can we
"work around it" by just deleting it?
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-09-13 6:28 ` Efraim Flashner
@ 2020-09-26 6:52 ` Chris Marusich
2020-10-05 12:33 ` Ludovic Courtès
` (2 more replies)
0 siblings, 3 replies; 45+ messages in thread
From: Chris Marusich @ 2020-09-26 6:52 UTC (permalink / raw)
To: Efraim Flashner
Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1.1: Type: text/plain, Size: 7951 bytes --]
Hi everyone,
Efraim Flashner <efraim@flashner.co.il> writes:
> Is this a file we actually need during the bootstrap process? Can we
> "work around it" by just deleting it?
That's a good idea. I tried building %gcc-static with the
--disable-libstdcxx configure flag (see attached patch), and that caused
the build of %gcc-static itself to become reproducible on Debian and
Fedora when using exactly the same inputs. To clarify, I have recently
run the following experiments:
+------+-------------+---------------------+--------------+----------------+---------------+
| Case | Build | libstdcxx | substitutes? | Inputs | Result |
+------+-------------+---------------------+--------------+----------------+---------------+
| | | | | Built fresh on | Output |
| 1 | %gcc-static | enabled | yes | Debian, copied | differs: |
| | | | | to Fedora | libstdc++.a |
+------+-------------+---------------------+--------------+----------------+---------------+
| | | | | Re-used inputs | Toy binary |
| 2 | toy program | n/a | yes | from above | does not |
| | | | | | differ |
+------+-------------+---------------------+--------------+----------------+---------------+
| | | | | Built fresh on | Output does |
| 3 | %gcc-static | disabled | yes | Debian, copied | not differ |
| | | | | to Fedora | |
+------+-------------+---------------------+--------------+----------------+---------------+
| | | | | Built fresh on | Output |
| 4 | %gcc-static | disabled | yes | Debian, fresh | differs: |
| | | | | on Fedora | various files |
+------+-------------+---------------------+--------------+----------------+---------------+
| | | | | Inputs failed | Build failed |
| 5 | %gcc-static | disabled | no | to build on | on both |
| | | | | both systems | systems |
+------+-------------+---------------------+--------------+----------------+---------------+
The "toy program" in case 2 was just this:
#include <stdio.h>
int main() {
printf("Hello");
return 0;
}
When I say I "copied" the inputs from Debian to Fedora, I mean just
that. I copied stuff like /gnu and /var/guix from Debian to Fedora
(while guix-daemon was stopped, of course), GC'd just %gcc-static on
Fedora, and then rebuilt %gcc-static on Fedora so it would use exactly
the same inputs as were used on Debian.
The most notable new findings are cases 3 and 4. Case 5 made me pretty
sad because I spent almost an entire weekend trying to build Guix from
source using various binary Guix releases, and in none of the attempts
was I successful in running "guix pull" or even just "guix environment
--pure guix" without substitutes, which really surprised me.
Case 3 confirms Efraim's suggestion: we can fix the libstdc++.a
reproducibility problem by simply not building libstdc++.a in the first
place. It also confirms that, when built with --disable-libstdcxx,
%gcc-static can be built reproducibly on different systems as long as
exactly the same inputs are used. Whether or not %gcc-static can be
used to successfully bootstrap packages on powerpc64-linux when built in
this way remains to be seen.
Case 4, unfortunately, demonstrates that there are still other
reproducibility issues that we have not yet resolved. Since the only
difference between cases 3 and 4 is how the inputs were realized, the
differing %gcc-static output must be caused by the inputs somehow.
In case 4, the %gcc-static output differed in the following files (the
hashes on the left are MD5 hashes):
--8<---------------cut here---------------start------------->8---
--- /dev/fd/63 2020-09-25 20:35:33.386554595 -0700
+++ /dev/fd/62 2020-09-25 20:35:33.387554604 -0700
@@ -1,28 +1,28 @@
-c9b0dfcbad566c0b8b88df94bb993312 ./bin/c++
-092823145dc96b9eb81111362f7b4ced ./bin/cpp
-c9b0dfcbad566c0b8b88df94bb993312 ./bin/g++
-e4cc43b7790dcd25f31419bad606b36e ./bin/gcc
+8f02302b55643f1c711e472a42fea8bd ./bin/c++
+9f1fd993e4f2b796fcc56f0b2f8a47d2 ./bin/cpp
+8f02302b55643f1c711e472a42fea8bd ./bin/g++
+583d1b011a7ba009d7385117dd7a33c8 ./bin/gcc
f9d94f4bb61f70d14ea4b2ce73c9be9d ./bin/gcc-ar
01fc2184f99c558771aa8f2fe30b373d ./bin/gcc-nm
da5356ee09ccda4ca06758d056370f7e ./bin/gcc-ranlib
-98645f7b00ba185e713915099853fd37 ./bin/gcov
-37dd62589454703ae7f2eaac1668b66e ./bin/gcov-dump
-f3dbc7e0c84a40194af3aa2429444e87 ./bin/gcov-tool
-c9b0dfcbad566c0b8b88df94bb993312 ./bin/powerpc64-linux-gnu-c++
-c9b0dfcbad566c0b8b88df94bb993312 ./bin/powerpc64-linux-gnu-g++
-e4cc43b7790dcd25f31419bad606b36e ./bin/powerpc64-linux-gnu-gcc
-e4cc43b7790dcd25f31419bad606b36e ./bin/powerpc64-linux-gnu-gcc-5.5.0
+a208bedbfca9c7bd6c27d0d42f7096fe ./bin/gcov
+43330e8ae00976b4b3427d2f83b0725e ./bin/gcov-dump
+9f37da5e96f147d733eb7195350ae5d2 ./bin/gcov-tool
+8f02302b55643f1c711e472a42fea8bd ./bin/powerpc64-linux-gnu-c++
+8f02302b55643f1c711e472a42fea8bd ./bin/powerpc64-linux-gnu-g++
+583d1b011a7ba009d7385117dd7a33c8 ./bin/powerpc64-linux-gnu-gcc
+583d1b011a7ba009d7385117dd7a33c8 ./bin/powerpc64-linux-gnu-gcc-5.5.0
f9d94f4bb61f70d14ea4b2ce73c9be9d ./bin/powerpc64-linux-gnu-gcc-ar
01fc2184f99c558771aa8f2fe30b373d ./bin/powerpc64-linux-gnu-gcc-nm
da5356ee09ccda4ca06758d056370f7e ./bin/powerpc64-linux-gnu-gcc-ranlib
-6ed530d13e65c3500b7e7b7cc863afdc ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1
-24a83af179ca8849da8c64aa854ec8ed ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus
-0c05b45bb926a06c2b09acdb1db9aad0 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2
+22b72247a5706f090505341263ca1fc2 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1
+3be618d184038dd30011d6aa8198c0be ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus
+2f31e84c01cc087318d0c7f15b6e3f47 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2
417a5b42a26275b2c912db16b9abf73a ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/fixincl
fd6f80ec9089ddf51f9cac26299e45af ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/fixinc.sh
a585abbd6a9cdc474564b54fc72e4efa ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/mkheaders
5071acceb24c0c0e8a423286205ed54c ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/mkinstalldirs
-4e77b773ac45ce8f82a4d21a34063920 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper
+5267311e0ed8bb5358e5556dfa205ca6 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper
a90ab86f837913280f72beb5310714bc ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbegin.o
0b38aa831c40b6bc4fb22248746d60d8 ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbeginS.o
8f62d8795bebd8e87caa3640522ff93b ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbeginT.o
--8<---------------cut here---------------end--------------->8---
These appear to be the same diffs that I reported before - with the
notable exception that libstdc++.a now is missing from the list of
differing files (hooray!).
Going forward, I'm not sure how best to investigate the inputs to find
out what's causing the differences. I just know I really, really,
really don't want to rebuild everything multiple times, since it takes
hours/days. If you have any creative ideas for how to speed up the
investigation, I'm all ears.
--
Chris
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: 0001-gnu-Disable-libstdc-in-bootstrap-GCC.patch --]
[-- Type: text/x-patch, Size: 1230 bytes --]
From e3d1778a86dfd171d59d91eb01417faaf63dfa17 Mon Sep 17 00:00:00 2001
From: Chris Marusich <cmmarusich@gmail.com>
Date: Sat, 19 Sep 2020 14:25:43 -0700
Subject: [PATCH] gnu: Disable libstdc++ in bootstrap GCC.
Fixes part of: <https://bugs.gnu.org/41669>.
* gnu/packages/make-bootstrap.scm (%gcc-static) [#:configure-flags]: Add
--disable-libstdcxx to disable building the libstdc++-v3 directory.
---
gnu/packages/make-bootstrap.scm | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/gnu/packages/make-bootstrap.scm b/gnu/packages/make-bootstrap.scm
index b2d3e2a326..8632d63c21 100644
--- a/gnu/packages/make-bootstrap.scm
+++ b/gnu/packages/make-bootstrap.scm
@@ -487,6 +487,10 @@ for `sh' in $PATH, and without nscd, and with static NSS modules."
;; Make sure gcc-nm doesn't require liblto_plugin.so.
"--disable-lto"
+ ;; In this GCC version, libstdc++.a is not reproducible:
+ ;; https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669
+ "--disable-libstdcxx"
+
"--disable-shared"
"--disable-plugin"
"--disable-libmudflap"
--
2.26.2
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply related [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-09-26 6:52 ` Chris Marusich
@ 2020-10-05 12:33 ` Ludovic Courtès
2020-12-13 23:36 ` Chris Marusich
2020-10-05 12:47 ` Efraim Flashner
2021-02-27 2:39 ` Chris Marusich
2 siblings, 1 reply; 45+ messages in thread
From: Ludovic Courtès @ 2020-10-05 12:33 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
Hi Chris,
Chris Marusich <cmmarusich@gmail.com> skribis:
> From e3d1778a86dfd171d59d91eb01417faaf63dfa17 Mon Sep 17 00:00:00 2001
> From: Chris Marusich <cmmarusich@gmail.com>
> Date: Sat, 19 Sep 2020 14:25:43 -0700
> Subject: [PATCH] gnu: Disable libstdc++ in bootstrap GCC.
>
> Fixes part of: <https://bugs.gnu.org/41669>.
>
> * gnu/packages/make-bootstrap.scm (%gcc-static) [#:configure-flags]: Add
> --disable-libstdcxx to disable building the libstdc++-v3 directory.
[...]
> + ;; In this GCC version, libstdc++.a is not reproducible:
> + ;; https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669
> + "--disable-libstdcxx"
Does it have any effect with GCC > 4.7? My understanding is that it
builds its libstdc++ no matter what.
Also, if it’s just libstdc++.a that’s problematic (ordering issue in the
.a archive?), perhaps we can use --disable-shared?
My 2¢ (I didn’t follow the whole discussion),
Ludo’.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-09-26 6:52 ` Chris Marusich
2020-10-05 12:33 ` Ludovic Courtès
@ 2020-10-05 12:47 ` Efraim Flashner
2021-02-27 2:39 ` Chris Marusich
2 siblings, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2020-10-05 12:47 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 9962 bytes --]
On Fri, Sep 25, 2020 at 11:52:48PM -0700, Chris Marusich wrote:
> Hi everyone,
>
> Efraim Flashner <efraim@flashner.co.il> writes:
>
> > Is this a file we actually need during the bootstrap process? Can we
> > "work around it" by just deleting it?
>
> That's a good idea. I tried building %gcc-static with the
> --disable-libstdcxx configure flag (see attached patch), and that caused
> the build of %gcc-static itself to become reproducible on Debian and
> Fedora when using exactly the same inputs. To clarify, I have recently
> run the following experiments:
>
> +------+-------------+---------------------+--------------+----------------+---------------+
> | Case | Build | libstdcxx | substitutes? | Inputs | Result |
> +------+-------------+---------------------+--------------+----------------+---------------+
> | | | | | Built fresh on | Output |
> | 1 | %gcc-static | enabled | yes | Debian, copied | differs: |
> | | | | | to Fedora | libstdc++.a |
> +------+-------------+---------------------+--------------+----------------+---------------+
> | | | | | Re-used inputs | Toy binary |
> | 2 | toy program | n/a | yes | from above | does not |
> | | | | | | differ |
> +------+-------------+---------------------+--------------+----------------+---------------+
> | | | | | Built fresh on | Output does |
> | 3 | %gcc-static | disabled | yes | Debian, copied | not differ |
> | | | | | to Fedora | |
> +------+-------------+---------------------+--------------+----------------+---------------+
> | | | | | Built fresh on | Output |
> | 4 | %gcc-static | disabled | yes | Debian, fresh | differs: |
> | | | | | on Fedora | various files |
> +------+-------------+---------------------+--------------+----------------+---------------+
> | | | | | Inputs failed | Build failed |
> | 5 | %gcc-static | disabled | no | to build on | on both |
> | | | | | both systems | systems |
> +------+-------------+---------------------+--------------+----------------+---------------+
>
> The "toy program" in case 2 was just this:
>
> #include <stdio.h>
> int main() {
> printf("Hello");
> return 0;
> }
>
> When I say I "copied" the inputs from Debian to Fedora, I mean just
> that. I copied stuff like /gnu and /var/guix from Debian to Fedora
> (while guix-daemon was stopped, of course), GC'd just %gcc-static on
> Fedora, and then rebuilt %gcc-static on Fedora so it would use exactly
> the same inputs as were used on Debian.
>
> The most notable new findings are cases 3 and 4. Case 5 made me pretty
> sad because I spent almost an entire weekend trying to build Guix from
> source using various binary Guix releases, and in none of the attempts
> was I successful in running "guix pull" or even just "guix environment
> --pure guix" without substitutes, which really surprised me.
>
> Case 3 confirms Efraim's suggestion: we can fix the libstdc++.a
> reproducibility problem by simply not building libstdc++.a in the first
> place. It also confirms that, when built with --disable-libstdcxx,
> %gcc-static can be built reproducibly on different systems as long as
> exactly the same inputs are used. Whether or not %gcc-static can be
> used to successfully bootstrap packages on powerpc64-linux when built in
> this way remains to be seen.
>
> Case 4, unfortunately, demonstrates that there are still other
> reproducibility issues that we have not yet resolved. Since the only
> difference between cases 3 and 4 is how the inputs were realized, the
> differing %gcc-static output must be caused by the inputs somehow.
>
> In case 4, the %gcc-static output differed in the following files (the
> hashes on the left are MD5 hashes):
>
> --8<---------------cut here---------------start------------->8---
> --- /dev/fd/63 2020-09-25 20:35:33.386554595 -0700
> +++ /dev/fd/62 2020-09-25 20:35:33.387554604 -0700
> @@ -1,28 +1,28 @@
> -c9b0dfcbad566c0b8b88df94bb993312 ./bin/c++
> -092823145dc96b9eb81111362f7b4ced ./bin/cpp
> -c9b0dfcbad566c0b8b88df94bb993312 ./bin/g++
> -e4cc43b7790dcd25f31419bad606b36e ./bin/gcc
> +8f02302b55643f1c711e472a42fea8bd ./bin/c++
> +9f1fd993e4f2b796fcc56f0b2f8a47d2 ./bin/cpp
> +8f02302b55643f1c711e472a42fea8bd ./bin/g++
> +583d1b011a7ba009d7385117dd7a33c8 ./bin/gcc
> f9d94f4bb61f70d14ea4b2ce73c9be9d ./bin/gcc-ar
> 01fc2184f99c558771aa8f2fe30b373d ./bin/gcc-nm
> da5356ee09ccda4ca06758d056370f7e ./bin/gcc-ranlib
> -98645f7b00ba185e713915099853fd37 ./bin/gcov
> -37dd62589454703ae7f2eaac1668b66e ./bin/gcov-dump
> -f3dbc7e0c84a40194af3aa2429444e87 ./bin/gcov-tool
> -c9b0dfcbad566c0b8b88df94bb993312 ./bin/powerpc64-linux-gnu-c++
> -c9b0dfcbad566c0b8b88df94bb993312 ./bin/powerpc64-linux-gnu-g++
> -e4cc43b7790dcd25f31419bad606b36e ./bin/powerpc64-linux-gnu-gcc
> -e4cc43b7790dcd25f31419bad606b36e ./bin/powerpc64-linux-gnu-gcc-5.5.0
> +a208bedbfca9c7bd6c27d0d42f7096fe ./bin/gcov
> +43330e8ae00976b4b3427d2f83b0725e ./bin/gcov-dump
> +9f37da5e96f147d733eb7195350ae5d2 ./bin/gcov-tool
> +8f02302b55643f1c711e472a42fea8bd ./bin/powerpc64-linux-gnu-c++
> +8f02302b55643f1c711e472a42fea8bd ./bin/powerpc64-linux-gnu-g++
> +583d1b011a7ba009d7385117dd7a33c8 ./bin/powerpc64-linux-gnu-gcc
> +583d1b011a7ba009d7385117dd7a33c8 ./bin/powerpc64-linux-gnu-gcc-5.5.0
> f9d94f4bb61f70d14ea4b2ce73c9be9d ./bin/powerpc64-linux-gnu-gcc-ar
> 01fc2184f99c558771aa8f2fe30b373d ./bin/powerpc64-linux-gnu-gcc-nm
> da5356ee09ccda4ca06758d056370f7e ./bin/powerpc64-linux-gnu-gcc-ranlib
> -6ed530d13e65c3500b7e7b7cc863afdc ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1
> -24a83af179ca8849da8c64aa854ec8ed ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus
> -0c05b45bb926a06c2b09acdb1db9aad0 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2
> +22b72247a5706f090505341263ca1fc2 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1
> +3be618d184038dd30011d6aa8198c0be ./libexec/gcc/powerpc64-linux-gnu/5.5.0/cc1plus
> +2f31e84c01cc087318d0c7f15b6e3f47 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/collect2
> 417a5b42a26275b2c912db16b9abf73a ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/fixincl
> fd6f80ec9089ddf51f9cac26299e45af ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/fixinc.sh
> a585abbd6a9cdc474564b54fc72e4efa ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/mkheaders
> 5071acceb24c0c0e8a423286205ed54c ./libexec/gcc/powerpc64-linux-gnu/5.5.0/install-tools/mkinstalldirs
> -4e77b773ac45ce8f82a4d21a34063920 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper
> +5267311e0ed8bb5358e5556dfa205ca6 ./libexec/gcc/powerpc64-linux-gnu/5.5.0/lto-wrapper
> a90ab86f837913280f72beb5310714bc ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbegin.o
> 0b38aa831c40b6bc4fb22248746d60d8 ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbeginS.o
> 8f62d8795bebd8e87caa3640522ff93b ./lib/gcc/powerpc64-linux-gnu/5.5.0/crtbeginT.o
> --8<---------------cut here---------------end--------------->8---
>
> These appear to be the same diffs that I reported before - with the
> notable exception that libstdc++.a now is missing from the list of
> differing files (hooray!).
>
> Going forward, I'm not sure how best to investigate the inputs to find
> out what's causing the differences. I just know I really, really,
> really don't want to rebuild everything multiple times, since it takes
> hours/days. If you have any creative ideas for how to speed up the
> investigation, I'm all ears.
>
Does diffoscope provide any useful clues as to what's going on? I don't
remember if gcc-5.5.0 was reproducible when I created the aarch64
bootstrap binaries.
> --
> Chris
> From e3d1778a86dfd171d59d91eb01417faaf63dfa17 Mon Sep 17 00:00:00 2001
> From: Chris Marusich <cmmarusich@gmail.com>
> Date: Sat, 19 Sep 2020 14:25:43 -0700
> Subject: [PATCH] gnu: Disable libstdc++ in bootstrap GCC.
>
> Fixes part of: <https://bugs.gnu.org/41669>.
>
> * gnu/packages/make-bootstrap.scm (%gcc-static) [#:configure-flags]: Add
> --disable-libstdcxx to disable building the libstdc++-v3 directory.
> ---
> gnu/packages/make-bootstrap.scm | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/gnu/packages/make-bootstrap.scm b/gnu/packages/make-bootstrap.scm
> index b2d3e2a326..8632d63c21 100644
> --- a/gnu/packages/make-bootstrap.scm
> +++ b/gnu/packages/make-bootstrap.scm
> @@ -487,6 +487,10 @@ for `sh' in $PATH, and without nscd, and with static NSS modules."
> ;; Make sure gcc-nm doesn't require liblto_plugin.so.
> "--disable-lto"
>
> + ;; In this GCC version, libstdc++.a is not reproducible:
> + ;; https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669
> + "--disable-libstdcxx"
> +
> "--disable-shared"
> "--disable-plugin"
> "--disable-libmudflap"
> --
> 2.26.2
>
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-10-05 12:33 ` Ludovic Courtès
@ 2020-12-13 23:36 ` Chris Marusich
2020-12-14 8:17 ` Efraim Flashner
2020-12-14 8:36 ` Ludovic Courtès
0 siblings, 2 replies; 45+ messages in thread
From: Chris Marusich @ 2020-12-13 23:36 UTC (permalink / raw)
To: Ludovic Courtès
Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 5371 bytes --]
Hi,
I tried to do some experiments to see if this problem happens with the
current GCC (version 10).
I built GCC 10 (not cross-compiling) on an x86_64 system using Guix with
substitutes on Debian. (I tried without substitutes, too, but some of
the dependencies failed to be built for unrelated reasons.) I then
manually copied the /gnu/store and related files (except for the GCC 10
output paths) from Debian onto a Fedora machine, and I rebuilt GCC 10
there using Guix (again, not cross-compiling). The output on Fedora was
identical to that of Debian. Of course, the configuration Guix uses to
build GCC 10 is a bit different from the one used to (cross-)build the
powerpc64-linux bootstrap GCC, but it's still an interesting data point.
In particular, GCC 10's libstdc++.a was identical on Debian and Fedora,
so I suppose maybe they've fixed that issue in the more recent versions.
I also tried to use Guix (the current version, from master branch - I
ran guix pull today) to cross-build gcc-10 for the powerpc64-linux-gnu
target on both Debian and Fedora x86_64 systems, starting from scratch
with substitutes enabled:
guix build --target=powerpc64-linux-gnu -e '(@ (gnu packages gcc) gcc-10)'
On both Debian and Fedora, the build of gcc-10.2.0.drv failed with the
following error:
checking for -fPIC -shared... yes
configure: error:
Building GCC with plugin support requires a host that supports
-fPIC, -shared, -ldl and -rdynamic.
This basically just means that we can't cross-build gcc-10 for
powerpc64-linux-gnu out of the box on x86_64 with current Guix. I was
hoping that the builds would succeed, and I would be able to find out if
cross-building gcc-10 in this way would create non-reproducible
artifacts. I was hoping maybe I could ask for help from the GCC
community if that were the case. But since it doesn't even build, the
results of that experiment were not very useful.
It's been almost half a year now, and we're not really any closer to
figuring out why the cross-built GCC bootstrap binary is
non-reproducible. It seems counter-productive to obsess about making
this specific binary reproducible, although I wish it could be so.
What do you think about using the bootstrap binaries we built half a
year ago, and proceed with bootstrapping efforts? To be totally honest,
I'm feeling pretty exhausted by this bug, since I have spent so many
days trying to unravel it, and I haven't made any significant progress.
With no clear end in sight, I would really prefer to move on instead of
blocking the entire bootstrapping effort on this reproducibility bug.
The reproducibility of the bootstrap binaries is important, but simply
having any bootstrap binaries at all is also important. I think I have
done my due diligence to try making them reproducible. Most of them
are, but I just can't figure out why GCC isn't. I think it would be
best to proceed with the binaries we have.
Ludovic Courtès <ludo@gnu.org> writes:
> Hi Chris,
>
> Chris Marusich <cmmarusich@gmail.com> skribis:
>
>> From e3d1778a86dfd171d59d91eb01417faaf63dfa17 Mon Sep 17 00:00:00 2001
>> From: Chris Marusich <cmmarusich@gmail.com>
>> Date: Sat, 19 Sep 2020 14:25:43 -0700
>> Subject: [PATCH] gnu: Disable libstdc++ in bootstrap GCC.
>>
>> Fixes part of: <https://bugs.gnu.org/41669>.
>>
>> * gnu/packages/make-bootstrap.scm (%gcc-static) [#:configure-flags]: Add
>> --disable-libstdcxx to disable building the libstdc++-v3 directory.
>
> [...]
>
>> + ;; In this GCC version, libstdc++.a is not reproducible:
>> + ;; https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669
>> + "--disable-libstdcxx"
>
> Does it have any effect with GCC > 4.7? My understanding is that it
> builds its libstdc++ no matter what.
>
> Also, if it’s just libstdc++.a that’s problematic (ordering issue in the
> .a archive?), perhaps we can use --disable-shared?
>
> My 2¢ (I didn’t follow the whole discussion),
> Ludo’.
Actually, --disable-shared is already present in the configure options.
My understanding is that libstdc++.a is a statically linked library
(perhaps I am mistaken...?), so I don't see why the presence or absence
of --disable-shared would affect it. I thought that option was just
supposed to control whether or not to build shared libraries.
Efraim Flashner <efraim@flashner.co.il> writes:
> On Fri, Sep 25, 2020 at 11:52:48PM -0700, Chris Marusich wrote:
>> Hi everyone,
>>
>> Efraim Flashner <efraim@flashner.co.il> writes:
>>
>> > Is this a file we actually need during the bootstrap process? Can we
>> > "work around it" by just deleting it?
I've spent all of my spare Guix time trying to debug this
reproducibility issue first, and half a year has passed without progress
as a result. I think we should use the bootstrap binaries we built half
a year ago, and move on with life.
At this point, it might even make more sense to try bootstrapping for
powerpc64le instead of powerpc64, since the rest of the world seems to
be gravitating toward the little-endian variant on POWER9 hardware, and
thus various programs out there are more likely to be better tested on
powerpc64le than powerpc64.
In any case, I don't think we should wait any longer.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-13 23:36 ` Chris Marusich
@ 2020-12-14 8:17 ` Efraim Flashner
2020-12-14 8:36 ` Ludovic Courtès
1 sibling, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2020-12-14 8:17 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 6552 bytes --]
On Sun, Dec 13, 2020 at 03:36:58PM -0800, Chris Marusich wrote:
> Hi,
>
> I tried to do some experiments to see if this problem happens with the
> current GCC (version 10).
>
> I built GCC 10 (not cross-compiling) on an x86_64 system using Guix with
> substitutes on Debian. (I tried without substitutes, too, but some of
> the dependencies failed to be built for unrelated reasons.) I then
> manually copied the /gnu/store and related files (except for the GCC 10
> output paths) from Debian onto a Fedora machine, and I rebuilt GCC 10
> there using Guix (again, not cross-compiling). The output on Fedora was
> identical to that of Debian. Of course, the configuration Guix uses to
> build GCC 10 is a bit different from the one used to (cross-)build the
> powerpc64-linux bootstrap GCC, but it's still an interesting data point.
> In particular, GCC 10's libstdc++.a was identical on Debian and Fedora,
> so I suppose maybe they've fixed that issue in the more recent versions.
>
> I also tried to use Guix (the current version, from master branch - I
> ran guix pull today) to cross-build gcc-10 for the powerpc64-linux-gnu
> target on both Debian and Fedora x86_64 systems, starting from scratch
> with substitutes enabled:
>
> guix build --target=powerpc64-linux-gnu -e '(@ (gnu packages gcc) gcc-10)'
>
> On both Debian and Fedora, the build of gcc-10.2.0.drv failed with the
> following error:
>
> checking for -fPIC -shared... yes
> configure: error:
> Building GCC with plugin support requires a host that supports
> -fPIC, -shared, -ldl and -rdynamic.
>
> This basically just means that we can't cross-build gcc-10 for
> powerpc64-linux-gnu out of the box on x86_64 with current Guix. I was
> hoping that the builds would succeed, and I would be able to find out if
> cross-building gcc-10 in this way would create non-reproducible
> artifacts. I was hoping maybe I could ask for help from the GCC
> community if that were the case. But since it doesn't even build, the
> results of that experiment were not very useful.
>
> It's been almost half a year now, and we're not really any closer to
> figuring out why the cross-built GCC bootstrap binary is
> non-reproducible. It seems counter-productive to obsess about making
> this specific binary reproducible, although I wish it could be so.
>
> What do you think about using the bootstrap binaries we built half a
> year ago, and proceed with bootstrapping efforts? To be totally honest,
> I'm feeling pretty exhausted by this bug, since I have spent so many
> days trying to unravel it, and I haven't made any significant progress.
> With no clear end in sight, I would really prefer to move on instead of
> blocking the entire bootstrapping effort on this reproducibility bug.
> The reproducibility of the bootstrap binaries is important, but simply
> having any bootstrap binaries at all is also important. I think I have
> done my due diligence to try making them reproducible. Most of them
> are, but I just can't figure out why GCC isn't. I think it would be
> best to proceed with the binaries we have.
>
> Ludovic Courtès <ludo@gnu.org> writes:
>
> > Hi Chris,
> >
> > Chris Marusich <cmmarusich@gmail.com> skribis:
> >
> >> From e3d1778a86dfd171d59d91eb01417faaf63dfa17 Mon Sep 17 00:00:00 2001
> >> From: Chris Marusich <cmmarusich@gmail.com>
> >> Date: Sat, 19 Sep 2020 14:25:43 -0700
> >> Subject: [PATCH] gnu: Disable libstdc++ in bootstrap GCC.
> >>
> >> Fixes part of: <https://bugs.gnu.org/41669>.
> >>
> >> * gnu/packages/make-bootstrap.scm (%gcc-static) [#:configure-flags]: Add
> >> --disable-libstdcxx to disable building the libstdc++-v3 directory.
> >
> > [...]
> >
> >> + ;; In this GCC version, libstdc++.a is not reproducible:
> >> + ;; https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669
> >> + "--disable-libstdcxx"
> >
> > Does it have any effect with GCC > 4.7? My understanding is that it
> > builds its libstdc++ no matter what.
> >
> > Also, if it’s just libstdc++.a that’s problematic (ordering issue in the
> > .a archive?), perhaps we can use --disable-shared?
> >
> > My 2¢ (I didn’t follow the whole discussion),
> > Ludo’.
>
> Actually, --disable-shared is already present in the configure options.
> My understanding is that libstdc++.a is a statically linked library
> (perhaps I am mistaken...?), so I don't see why the presence or absence
> of --disable-shared would affect it. I thought that option was just
> supposed to control whether or not to build shared libraries.
>
> Efraim Flashner <efraim@flashner.co.il> writes:
>
> > On Fri, Sep 25, 2020 at 11:52:48PM -0700, Chris Marusich wrote:
> >> Hi everyone,
> >>
> >> Efraim Flashner <efraim@flashner.co.il> writes:
> >>
> >> > Is this a file we actually need during the bootstrap process? Can we
> >> > "work around it" by just deleting it?
>
> I've spent all of my spare Guix time trying to debug this
> reproducibility issue first, and half a year has passed without progress
> as a result. I think we should use the bootstrap binaries we built half
> a year ago, and move on with life.
>
> At this point, it might even make more sense to try bootstrapping for
> powerpc64le instead of powerpc64, since the rest of the world seems to
> be gravitating toward the little-endian variant on POWER9 hardware, and
> thus various programs out there are more likely to be better tested on
> powerpc64le than powerpc64.
>
> In any case, I don't think we should wait any longer.
As far as powerpc64 vs powerpc64le, I'll let those with the hardware
have more of a say, they'll be the ones using it. As far as the
bootstrap binaries go, I don't remember having this much pushback with
my binaries for aarch64 (just a request to rebuild with guile-2.0.14
since it was reproducible), and I'm not sure how much Janneke had with
the Hurd binaries but I don't think it was this much. The ultimate goal
anyway is to replace them with artisanally crafted mes binaries, and I
understand we want to have them as reproducible as possible, but I don't
think it's fair to keep this architecture out when we've let other ones
in with similar reproducible problems.
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-13 23:36 ` Chris Marusich
2020-12-14 8:17 ` Efraim Flashner
@ 2020-12-14 8:36 ` Ludovic Courtès
2020-12-14 9:22 ` Leo Le Bouter via Bug reports for GNU Guix
1 sibling, 1 reply; 45+ messages in thread
From: Ludovic Courtès @ 2020-12-14 8:36 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Léo Le Bouter, Maxim Cournoyer, Vincent Legoll
Hi Chris,
Chris Marusich <cmmarusich@gmail.com> skribis:
> It's been almost half a year now, and we're not really any closer to
> figuring out why the cross-built GCC bootstrap binary is
> non-reproducible. It seems counter-productive to obsess about making
> this specific binary reproducible, although I wish it could be so.
>
> What do you think about using the bootstrap binaries we built half a
> year ago, and proceed with bootstrapping efforts? To be totally honest,
> I'm feeling pretty exhausted by this bug, since I have spent so many
> days trying to unravel it, and I haven't made any significant progress.
> With no clear end in sight, I would really prefer to move on instead of
> blocking the entire bootstrapping effort on this reproducibility bug.
> The reproducibility of the bootstrap binaries is important, but simply
> having any bootstrap binaries at all is also important. I think I have
> done my due diligence to try making them reproducible. Most of them
> are, but I just can't figure out why GCC isn't. I think it would be
> best to proceed with the binaries we have.
I didn’t follow the whole discussion nor did I try to investigate
myself, but thanks a lot for going to great lengths trying to identify
the issue; this is an impressive amount of work, and I can only share
your disappointment.
Given this effort, I agree that it may be best at this point to move on
and start with these non-reproducible binaries. At least, the problem
is now documented.
> At this point, it might even make more sense to try bootstrapping for
> powerpc64le instead of powerpc64, since the rest of the world seems to
> be gravitating toward the little-endian variant on POWER9 hardware, and
> thus various programs out there are more likely to be better tested on
> powerpc64le than powerpc64.
Yes, my understanding is that other people, in particular Tobias Platen
and dftxbs3e, were looking at powerpc64le, so perhaps it’s a good idea
to concentrate on that one?
Anyhow, please let me know if/when bootstrap binaries should be uploaded
to ftp.gnu.org (with a signed message). When updating bootstrap.scm to
refer to them, please include the commit ID used to build them in the
commit message.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 8:36 ` Ludovic Courtès
@ 2020-12-14 9:22 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 10:27 ` Efraim Flashner
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-14 9:22 UTC (permalink / raw)
To: Ludovic Courtès, Chris Marusich
Cc: 41669, Maxim Cournoyer, Vincent Legoll
Hello Chris, Ludo and Efraim,
In my experience, the bootstrap binaries are reproducible on
powerpc64le-linux-gnu for a specific GNU Guix System and GNU Guix
version and configuration. It's not perfect that the kernel version has
to be pinned for reproducibility but it's better than nothing.
The issue with powerpc64le-linux-gnu on GNU Guix core-updates now is
that it has been upgraded to Glibc 2.32 and there is other issues due
to that. Glibc 2.31 is otherwise working well. I wish we could push
changes to build bootstrap binaries to master where there is Glibc 2.31
(and ensure the changes don't affect other architectures) and get this
over with.
Leo
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 9:22 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-14 10:27 ` Efraim Flashner
2020-12-14 10:34 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 1 reply; 45+ messages in thread
From: Efraim Flashner @ 2020-12-14 10:27 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 1393 bytes --]
On Mon, Dec 14, 2020 at 10:22:43AM +0100, Leo Le Bouter wrote:
> Hello Chris, Ludo and Efraim,
>
> In my experience, the bootstrap binaries are reproducible on
> powerpc64le-linux-gnu for a specific GNU Guix System and GNU Guix
> version and configuration. It's not perfect that the kernel version has
> to be pinned for reproducibility but it's better than nothing.
>
> The issue with powerpc64le-linux-gnu on GNU Guix core-updates now is
> that it has been upgraded to Glibc 2.32 and there is other issues due
> to that. Glibc 2.31 is otherwise working well. I wish we could push
> changes to build bootstrap binaries to master where there is Glibc 2.31
> (and ensure the changes don't affect other architectures) and get this
> over with.
It is possible to create a "perfect setup" by editing the package
definitions in gnu/packages/bootstrap to fix certain issues which are
needed to make bootstrap binaries actually work. I suppose it would be
possible to downgrade glibc in bootstrap.scm, but I wouldn't count on
maintaining a separate glibc for powerpc64le vs the rest of the
architectures.
Do you have a preference big-endian vs little endian?
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 10:27 ` Efraim Flashner
@ 2020-12-14 10:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 10:38 ` Efraim Flashner
2020-12-20 7:28 ` Chris Marusich
0 siblings, 2 replies; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-14 10:34 UTC (permalink / raw)
To: Efraim Flashner; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
On Mon, 2020-12-14 at 12:27 +0200, Efraim Flashner wrote:
> but I wouldn't count on
> maintaining a separate glibc for powerpc64le vs the rest of the
> architectures.
It doesnt need to be maintained, it only needs to work in one commit on
master and then one uses time-machine to rebuild the bootstrap binaries
if they wish to. The make-bootstrap code is already unmaintained for
every architecture anyway since we never rebuild bootstrap binaries
using later GNU Guix revisions ever.
> Do you have a preference big-endian vs little endian?
I'd like both but little endian has the widest eco-system support
especially w.r.t. to Linux drivers. Many Linux drivers have endianness
bugs (lack of endian-safe serialization for DMA..), it's such a plague
that sticking to little endian is just better right now. One common
example being mpt3sas and amdgpu drivers required in some
configurations of the Talos II system.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 10:34 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-14 10:38 ` Efraim Flashner
2020-12-14 10:44 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-20 7:28 ` Chris Marusich
1 sibling, 1 reply; 45+ messages in thread
From: Efraim Flashner @ 2020-12-14 10:38 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 1531 bytes --]
On Mon, Dec 14, 2020 at 11:34:35AM +0100, Leo Le Bouter wrote:
> On Mon, 2020-12-14 at 12:27 +0200, Efraim Flashner wrote:
>
> > but I wouldn't count on
> > maintaining a separate glibc for powerpc64le vs the rest of the
> > architectures.
>
> It doesnt need to be maintained, it only needs to work in one commit on
> master and then one uses time-machine to rebuild the bootstrap binaries
> if they wish to. The make-bootstrap code is already unmaintained for
> every architecture anyway since we never rebuild bootstrap binaries
> using later GNU Guix revisions ever.
It looks like I mispoke, I meant gnu/packages/make-bootstrap.scm. If we
change glibc-for-bootstrap to inherit glibc-2.31 then the rest of the
bootstrap binaries should use that one and everything else will use the
regular glibc.
>
> > Do you have a preference big-endian vs little endian?
>
> I'd like both but little endian has the widest eco-system support
> especially w.r.t. to Linux drivers. Many Linux drivers have endianness
> bugs (lack of endian-safe serialization for DMA..), it's such a plague
> that sticking to little endian is just better right now. One common
> example being mpt3sas and amdgpu drivers required in some
> configurations of the Talos II system.
>
I remember you mentioning that.
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 10:38 ` Efraim Flashner
@ 2020-12-14 10:44 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 22:24 ` Ludovic Courtès
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-14 10:44 UTC (permalink / raw)
To: Efraim Flashner; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
On Mon, 2020-12-14 at 12:38 +0200, Efraim Flashner wrote:
> It looks like I mispoke, I meant gnu/packages/make-bootstrap.scm. If
> we
> change glibc-for-bootstrap to inherit glibc-2.31 then the rest of the
> bootstrap binaries should use that one and everything else will use
> the
> regular glibc.
It would be great to do that at least temporarily on master. It will
not affect much since other architectures are bootstrapped already. We
could also make it conditional. Reproducibility instructions will have
to contain exact commit id and configuration for both GNU Guix System
(x86_64-linux) and GNU Guix which can cross-compile.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 10:44 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-14 22:24 ` Ludovic Courtès
2020-12-15 7:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-15 7:46 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 2 replies; 45+ messages in thread
From: Ludovic Courtès @ 2020-12-14 22:24 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
Hi Leo,
Leo Le Bouter <lle-bout@zaclys.net> skribis:
> It would be great to do that at least temporarily on master. It will
> not affect much since other architectures are bootstrapped already. We
> could also make it conditional. Reproducibility instructions will have
> to contain exact commit id and configuration for both GNU Guix System
> (x86_64-linux) and GNU Guix which can cross-compile.
Yes, I think we could just cross-build those bootstrap binaries from
current ‘master’ and be done with it, if it works for you.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 22:24 ` Ludovic Courtès
@ 2020-12-15 7:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-15 9:35 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-15 7:46 ` Leo Le Bouter via Bug reports for GNU Guix
1 sibling, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-15 7:34 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
On Mon, 2020-12-14 at 23:24 +0100, Ludovic Courtès wrote:
> Yes, I think we could just cross-build those bootstrap binaries from
> current ‘master’ and be done with it, if it works for you.
Yes that would be awesome! The master branch just needs the patch from
bug <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=44778> - I guess
considering it affects lots of packages it needs to be rewritten the
same way Efraim has rewritten their PowerPC 32-bits patch. I'll look
into that. Correct?
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 22:24 ` Ludovic Courtès
2020-12-15 7:34 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-15 7:46 ` Leo Le Bouter via Bug reports for GNU Guix
1 sibling, 0 replies; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-15 7:46 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 556 bytes --]
For the record, I attached the failed build log for current core-
updates.
$ ./pre-inst-env guix describe
Git checkout:
repository: /home/lle-bout/src/guix
branch: core-updates
commit: cc6cb6e80a42355147809b4830053a34d1563994
Build command:
$ ./pre-inst-env guix build --target=powerpc64le-linux-gnu bootstrap-
tarballs
The most important bit in the build log is:
configure: error: *** The compiler must support -mabi=ieeelongdouble
and -mlongdouble simultaneously.
This particular error does not happen with the GCC 7.x and Glibc 2.31
combo.
[-- Attachment #2: 4aqg8p7dbpgp8mc50nyrr1r5n6q0sw-glibc-cross-powerpc64le-linux-gnu-2.32.drv.bz2 --]
[-- Type: application/x-bzip, Size: 73436 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-15 7:34 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-15 9:35 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 0 replies; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-15 9:35 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
On Tue, 2020-12-15 at 08:34 +0100, Leo Le Bouter wrote:
> On Mon, 2020-12-14 at 23:24 +0100, Ludovic Courtès wrote:
> > Yes, I think we could just cross-build those bootstrap binaries
> > from
> > current ‘master’ and be done with it, if it works for you.
>
> Yes that would be awesome! The master branch just needs the patch
> from
> bug <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=44778> - I guess
> considering it affects lots of packages it needs to be rewritten the
> same way Efraim has rewritten their PowerPC 32-bits patch. I'll look
> into that. Correct?
Rewrote patch and submitted here: <
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=45252>
Thanks
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-14 10:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 10:38 ` Efraim Flashner
@ 2020-12-20 7:28 ` Chris Marusich
2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-30 1:28 ` Leo Le Bouter via Bug reports for GNU Guix
1 sibling, 2 replies; 45+ messages in thread
From: Chris Marusich @ 2020-12-20 7:28 UTC (permalink / raw)
To: Leo Le Bouter, Efraim Flashner, Ludovic Courtès, 41669,
Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 6011 bytes --]
Hi all,
It's great to see forward motion again!
Efraim Flashner <efraim@flashner.co.il> writes:
> As far as powerpc64 vs powerpc64le, I'll let those with the hardware
> have more of a say, they'll be the ones using it. As far as the
> bootstrap binaries go, I don't remember having this much pushback with
> my binaries for aarch64 (just a request to rebuild with guile-2.0.14
> since it was reproducible), and I'm not sure how much Janneke had with
> the Hurd binaries but I don't think it was this much. The ultimate goal
> anyway is to replace them with artisanally crafted mes binaries, and I
> understand we want to have them as reproducible as possible, but I don't
> think it's fair to keep this architecture out when we've let other ones
> in with similar reproducible problems.
Ludovic Courtès <ludo@gnu.org> writes:
> I didn’t follow the whole discussion nor did I try to investigate
> myself, but thanks a lot for going to great lengths trying to identify
> the issue; this is an impressive amount of work, and I can only share
> your disappointment.
>
> Given this effort, I agree that it may be best at this point to move on
> and start with these non-reproducible binaries. At least, the problem
> is now documented.
I'm glad you agree. For powerpc64 (big-endian), should we just make the
changes for bootstrapping on the master branch, or should we use a
separate branch?
If we use a separate branch, we could use the name "wip-ppc64", since
there is already a "wip-ppc64le" for powerpc64le. Is it expected that
commits on these "wip" branches will never be modified (e.g., via
rebasing)?
Leo Le Bouter <lle-bout@zaclys.net> writes:
>> Do you have a preference big-endian vs little endian?
>
> I'd like both but little endian has the widest eco-system support
> especially w.r.t. to Linux drivers. Many Linux drivers have endianness
> bugs (lack of endian-safe serialization for DMA..), it's such a plague
> that sticking to little endian is just better right now. One common
> example being mpt3sas and amdgpu drivers required in some
> configurations of the Talos II system.
Ludovic Courtès <ludo@gnu.org> writes:
>> At this point, it might even make more sense to try bootstrapping for
>> powerpc64le instead of powerpc64, since the rest of the world seems to
>> be gravitating toward the little-endian variant on POWER9 hardware, and
>> thus various programs out there are more likely to be better tested on
>> powerpc64le than powerpc64.
>
> Yes, my understanding is that other people, in particular Tobias Platen
> and dftxbs3e, were looking at powerpc64le, so perhaps it’s a good idea
> to concentrate on that one?
I agree. It's probably better to focus on little-endian. However, it
isn't clear yet which will be ultimately harder for us to bootstrap, so
I also think it's fine to work on both in parallel and see how it goes.
Ludovic Courtès <ludo@gnu.org> writes:
> Anyhow, please let me know if/when bootstrap binaries should be uploaded
> to ftp.gnu.org (with a signed message). When updating bootstrap.scm to
> refer to them, please include the commit ID used to build them in the
> commit message.
Over the last few days, Leo and I coordinated to try cross-compiling the
powerpc64 bootstrap tarballs one more time, using two Guix System VMs.
We did this because we thought that maybe if we took care to keep the
Guix Systems "the same" (e.g., same kernel), it would produce identical
results. Instead, the result was the same as before: all bootstrap
tarballs except for gcc-static were identical, and gcc-static differed
in ways similar to what has already been described earlier in this bug
report. In fact, with the exception of gcc-static, the bootstrap
tarballs were identical to the tarballs multiple people built 6 months
ago in June. This means that (1) with the exception of gcc-static, the
bootstrap tarballs build reproducibly even across systems and after
quite a bit of change has taken place on the master branch, and (2) even
when built from source on two separate, fresh, practically identical
Guix System machines, without using substitutes, the gcc-static binary
still differs.
Now that we have decided to use these powerpc64 bootstrap tarballs, what
are the next steps for uploading them to the GNU FTP server? I've never
done that before, and I don't think I have access. For now I've put a
signed copy of the powerpc64-linux (big endian) bootstrap tarballs, with
a SHA-512 hash, here:
https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz
https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.asc
https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.sha512sum
For the record, these bootstrap tarballs were built via the following
steps:
- Use
https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
to install Guix System 1.2.0 on an x86_64-linux machine.
- Run: guix pull --no-substitutes --commit=1ced8379c7641788fa607b19b7a66d18f045362b
- Run: guix build --no-substitutes --target=powerpc64-linux-gnu bootstrap-tarballs
- I didn't run "guix system reconfigure" after installing Guix System;
theoretically it shouldn't matter, but for the purpose of our
experiment, I just left the system in its default configuration in
order to ensure that the kernel etc. would be the same on both VMs.
Once we get these binaries into the GNU FTP server, I'll get started on
updating gnu/packages/bootstrap.scm and other files necessary to begin
bootstrapping powerpc64-linux. I'll mainly be adapting the work that
Leo already did, and following the lead of others like Efraim and his
work on the wip-ppc branch. I will probably have questions as I go, so
I'll ask on guix-devel.
Please let me know if you'd like this done on a special branch.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-20 7:28 ` Chris Marusich
@ 2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 4:23 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
2020-12-30 1:28 ` Leo Le Bouter via Bug reports for GNU Guix
1 sibling, 2 replies; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 2:25 UTC (permalink / raw)
To: Chris Marusich, Efraim Flashner, Ludovic Courtès, 41669,
Maxim Cournoyer, Vincent Legoll
[-- Attachment #1.1: Type: text/plain, Size: 254 bytes --]
Hello!
I want to have one last attempt at making the binaries reproducible.
Could anyone help adjusting this patch so the package definition's hash
does not change on other architectures? So it can be proposed for merge
in master..
Thank you
[-- Attachment #1.2: 0001-gnu-gcc-4.7-Disable-parallel-compilation-on-powerpc6.patch --]
[-- Type: text/x-patch, Size: 966 bytes --]
From e6931a7ebb9cc0681a3211ac38a1c58c7a176481 Mon Sep 17 00:00:00 2001
From: John Doe <dftxbs3e@free.fr>
Date: Mon, 28 Dec 2020 03:21:08 +0100
Subject: [PATCH] gnu: gcc-4.7: Disable parallel compilation on powerpc64*.
* gnu/packages/gcc.scm (gcc-4.7)[arguments]: Conditionally disable
parallel compilation on powerpc64*.
---
gnu/packages/gcc.scm | 2 ++
1 file changed, 2 insertions(+)
diff --git a/gnu/packages/gcc.scm b/gnu/packages/gcc.scm
index 4d5aaa7070..6d32677144 100644
--- a/gnu/packages/gcc.scm
+++ b/gnu/packages/gcc.scm
@@ -204,6 +204,8 @@ where the OS part is overloaded to denote a specific ABI---into GCC
,(if stripped? "-g0" "-g")))))
#:tests? #f
+ #:parallel-build? ,(string-prefix? "powerpc64" (or (%current-target-system)
+ (%current-system)))
#:phases
(modify-phases %standard-phases
--
2.29.2
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply related [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 4:23 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
` (3 more replies)
2020-12-28 8:07 ` Efraim Flashner
1 sibling, 4 replies; 45+ messages in thread
From: Chris Marusich @ 2020-12-28 4:23 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 1948 bytes --]
Leo Le Bouter <lle-bout@zaclys.net> writes:
> I want to have one last attempt at making the binaries reproducible.
>
> Could anyone help adjusting this patch so the package definition's hash
> does not change on other architectures? So it can be proposed for merge
> in master..
>
> Thank you
>
> From e6931a7ebb9cc0681a3211ac38a1c58c7a176481 Mon Sep 17 00:00:00 2001
> From: John Doe <dftxbs3e@free.fr>
> Date: Mon, 28 Dec 2020 03:21:08 +0100
> Subject: [PATCH] gnu: gcc-4.7: Disable parallel compilation on powerpc64*.
>
> * gnu/packages/gcc.scm (gcc-4.7)[arguments]: Conditionally disable
> parallel compilation on powerpc64*.
> ---
> gnu/packages/gcc.scm | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/gnu/packages/gcc.scm b/gnu/packages/gcc.scm
> index 4d5aaa7070..6d32677144 100644
> --- a/gnu/packages/gcc.scm
> +++ b/gnu/packages/gcc.scm
> @@ -204,6 +204,8 @@ where the OS part is overloaded to denote a specific ABI---into GCC
> ,(if stripped? "-g0" "-g")))))
>
> #:tests? #f
> + #:parallel-build? ,(string-prefix? "powerpc64" (or (%current-target-system)
> + (%current-system)))
>
> #:phases
> (modify-phases %standard-phases
If it's just for the sake of trying one last time, we could just add
--cores=1 to the Guix invocations, or run everything in a single-core
VM. Wouldn't that have the same effect?
I think you'll probably agree, so I've proactively started another build
on two fresh single-core VMs (using the same procedure I described
earlier, starting from the 1.2.0 installation ISO image). It'll take a
few days to finish, I'm sure. Please let me know if you think we need
the patch to run this final experiment. Otherwise, I'll just report the
results of this latest experiment in a few days' time.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 4:23 ` Chris Marusich
@ 2020-12-28 8:07 ` Efraim Flashner
2020-12-28 12:39 ` Leo Le Bouter via Bug reports for GNU Guix
` (2 subsequent siblings)
3 siblings, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2020-12-28 8:07 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 2413 bytes --]
On Sun, Dec 27, 2020 at 08:23:21PM -0800, Chris Marusich wrote:
> Leo Le Bouter <lle-bout@zaclys.net> writes:
>
> > I want to have one last attempt at making the binaries reproducible.
> >
> > Could anyone help adjusting this patch so the package definition's hash
> > does not change on other architectures? So it can be proposed for merge
> > in master..
> >
> > Thank you
> >
> > From e6931a7ebb9cc0681a3211ac38a1c58c7a176481 Mon Sep 17 00:00:00 2001
> > From: John Doe <dftxbs3e@free.fr>
> > Date: Mon, 28 Dec 2020 03:21:08 +0100
> > Subject: [PATCH] gnu: gcc-4.7: Disable parallel compilation on powerpc64*.
> >
> > * gnu/packages/gcc.scm (gcc-4.7)[arguments]: Conditionally disable
> > parallel compilation on powerpc64*.
> > ---
> > gnu/packages/gcc.scm | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/gnu/packages/gcc.scm b/gnu/packages/gcc.scm
> > index 4d5aaa7070..6d32677144 100644
> > --- a/gnu/packages/gcc.scm
> > +++ b/gnu/packages/gcc.scm
> > @@ -204,6 +204,8 @@ where the OS part is overloaded to denote a specific ABI---into GCC
> > ,(if stripped? "-g0" "-g")))))
> >
> > #:tests? #f
> > + #:parallel-build? ,(string-prefix? "powerpc64" (or (%current-target-system)
> > + (%current-system)))
> >
> > #:phases
> > (modify-phases %standard-phases
>
> If it's just for the sake of trying one last time, we could just add
> --cores=1 to the Guix invocations, or run everything in a single-core
> VM. Wouldn't that have the same effect?
Close enough. We can also add it into the commit message, to build it
with --cores=1
> I think you'll probably agree, so I've proactively started another build
> on two fresh single-core VMs (using the same procedure I described
> earlier, starting from the 1.2.0 installation ISO image). It'll take a
> few days to finish, I'm sure. Please let me know if you think we need
> the patch to run this final experiment. Otherwise, I'll just report the
> results of this latest experiment in a few days' time.
>
> --
> Chris
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 4:23 ` Chris Marusich
@ 2020-12-28 8:07 ` Efraim Flashner
1 sibling, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2020-12-28 8:07 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 646 bytes --]
On Mon, Dec 28, 2020 at 03:25:27AM +0100, Leo Le Bouter wrote:
> Hello!
>
> I want to have one last attempt at making the binaries reproducible.
>
> Could anyone help adjusting this patch so the package definition's hash
> does not change on other architectures? So it can be proposed for merge
> in master..
>
> Thank you
I think you'll find the proposed patch does exactly the opposite of what
you want :P
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 4:23 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
@ 2020-12-28 12:39 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 12:55 ` Leo Le Bouter via Bug reports for GNU Guix
2021-01-05 3:54 ` Chris Marusich
3 siblings, 0 replies; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 12:39 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 615 bytes --]
On Sun, 2020-12-27 at 20:23 -0800, Chris Marusich wrote:
> If it's just for the sake of trying one last time, we could just add
> --cores=1 to the Guix invocations, or run everything in a single-core
> VM. Wouldn't that have the same effect?
My system has an offload set up and somehow --cores=1 does not work, so
I needed this patch to make sure, also to optimize run-time I tried to
disable parallel build only for gcc.
I also tried to build only the gcc-static binary with:
$ ./pre-inst-env guix build --cores=1 --target=powerpc64le-linux-gnu -e
'(@@ (gnu packages make-bootstrap) %gcc-static)'
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 4:23 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
2020-12-28 12:39 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 12:55 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 15:31 ` Leo Le Bouter via Bug reports for GNU Guix
2021-01-05 3:54 ` Chris Marusich
3 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 12:55 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 753 bytes --]
On Sun, 2020-12-27 at 20:23 -0800, Chris Marusich wrote:
> I think you'll probably agree, so I've proactively started another
> build
> on two fresh single-core VMs (using the same procedure I described
> earlier, starting from the 1.2.0 installation ISO image). It'll take
> a
> few days to finish, I'm sure. Please let me know if you think we
> need
> the patch to run this final experiment. Otherwise, I'll just report
> the
> results of this latest experiment in a few days' time.
>
I did the same, I ran on both my laptop and another VM in the server:
$ ./pre-inst-env guix build --no-offload --cores=1 --
target=powerpc64le-linux-gnu -e '(@@ (gnu packages make-bootstrap)
%gcc-static)'
With latest master.
Let's see!
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 12:55 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 15:31 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 17:40 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 15:31 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
On Mon, 2020-12-28 at 13:55 +0100, Leo Le Bouter wrote:
> I did the same, I ran on both my laptop and another VM in the server:
>
> $ ./pre-inst-env guix build --no-offload --cores=1 --
> target=powerpc64le-linux-gnu -e '(@@ (gnu packages make-bootstrap)
> %gcc-static)'
>
> With latest master.
>
> Let's see!
I modified my virtual machine to only have a single core because it
seems --cores=1 does not work properly with cross-compilation.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 15:31 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 17:40 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 19:01 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 17:40 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 888 bytes --]
On Mon, 2020-12-28 at 16:31 +0100, Leo Le Bouter wrote:
> I modified my virtual machine to only have a single core because it
> seems --cores=1 does not work properly with cross-compilation.
Great news! I think using only 1 core fixes it. But since --cores=1 is
broken for cross-compilation it seems, I had to use a single-core VM.
Can you do the same? (Create a single-core x86_64 however you want VM,
run a command and report hashes)
$ guix gc && sha256sum "$(guix build -M 1 -c 1 --target=powerpc64le-linux-gnu -e '(@@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)')/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz"
Also try with powerpc64-linux-gnu:
$ guix gc && sha256sum "$(guix build -M 1 -c 1 --target=powerpc64-linux-gnu -e '(@@ (gnu packages make-bootstrap) %gcc-bootstrap-tarball)')/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz"
Thanks a lot!
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 17:40 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 19:01 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 20:59 ` Leo Le Bouter via Bug reports for GNU Guix
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 19:01 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 370 bytes --]
By the way here's my powerpc64le-linux-gnu hash:
$ sha256sum /gnu/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-tarball-5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
153f356a8f58102e7e57a006e836ec7450e69dee120ba83d9f7dacf07162537b /gnu/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-tarball-5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 19:01 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-28 20:59 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-29 7:08 ` Efraim Flashner
0 siblings, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-28 20:59 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 539 bytes --]
On Mon, 2020-12-28 at 20:01 +0100, Leo Le Bouter wrote:
> By the way here's my powerpc64le-linux-gnu hash:
>
> $ sha256sum /gnu/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-
> tarball-5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
> 153f356a8f58102e7e57a006e836ec7450e69dee120ba83d9f7dacf07162537b /gn
> u/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-tarball-
> 5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
Nevermind, tried in a brand new single-core VM on my laptop and it did
not reproduce...
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 20:59 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-29 7:08 ` Efraim Flashner
0 siblings, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2020-12-29 7:08 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 1210 bytes --]
On Mon, Dec 28, 2020 at 09:59:26PM +0100, Leo Le Bouter wrote:
> On Mon, 2020-12-28 at 20:01 +0100, Leo Le Bouter wrote:
> > By the way here's my powerpc64le-linux-gnu hash:
> >
> > $ sha256sum /gnu/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-
> > tarball-5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
> > 153f356a8f58102e7e57a006e836ec7450e69dee120ba83d9f7dacf07162537b /gn
> > u/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-tarball-
> > 5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
>
> Nevermind, tried in a brand new single-core VM on my laptop and it did
> not reproduce...
ab2fd297f65df5ab6fb5662dc3988f8421f2194026ac3df97eba3b53832796b9 /gnu/store/cc4sj9kiw1vzhhhxawnqvjjdi4ygbxp5-gcc-stripped-tarball-5.5.0/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz
9bf3685309b68cc0a39b2dc783ada393e6ef889398dd21fd07c7893159c13cc0 /gnu/store/kjxwb8lwbgnp2np7ji8dvjmh290p1jnm-gcc-stripped-tarball-5.5.0/gcc-stripped-5.5.0-powerpc64-linux-gnu.tar.xz
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-20 7:28 ` Chris Marusich
2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2020-12-30 1:28 ` Leo Le Bouter via Bug reports for GNU Guix
2021-01-04 9:37 ` Ludovic Courtès
1 sibling, 1 reply; 45+ messages in thread
From: Leo Le Bouter via Bug reports for GNU Guix @ 2020-12-30 1:28 UTC (permalink / raw)
To: Chris Marusich, Efraim Flashner, Ludovic Courtès, 41669,
Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 2431 bytes --]
Hello Ludo!
On Sat, 2020-12-19 at 23:28 -0800, Chris Marusich wrote:
> Now that we have decided to use these powerpc64 bootstrap tarballs,
> what
> are the next steps for uploading them to the GNU FTP server? I've
> never
> done that before, and I don't think I have access. For now I've put
> a
> signed copy of the powerpc64-linux (big endian) bootstrap tarballs,
> with
> a SHA-512 hash, here:
>
> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz
> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.asc
> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.sha512sum
>
> For the record, these bootstrap tarballs were built via the following
> steps:
>
> - Use
>
> https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
> to install Guix System 1.2.0 on an x86_64-linux machine.
> - Run: guix pull --no-substitutes --
> commit=1ced8379c7641788fa607b19b7a66d18f045362b
> - Run: guix build --no-substitutes --target=powerpc64-linux-gnu
> bootstrap-tarballs
> - I didn't run "guix system reconfigure" after installing Guix
> System;
> theoretically it shouldn't matter, but for the purpose of our
> experiment, I just left the system in its default configuration in
> order to ensure that the kernel etc. would be the same on both VMs.
>
> Once we get these binaries into the GNU FTP server,
Can you do it? Upload the binaries on GNU FTP server? Little endian
binaries will come along shortly as well. We decided (Chris and me)
that obsessing on this problem any longer is not going to help us
complete this port, the amount of struggle is getting very
demotivating. We got reasonable proof that this non-reproducibility GCC
problem exists and is non-trivial to solve, that's what I wanted with
the last attempts, I had hope it could still be trivial but turns out
not.
> I'll get started on
> updating gnu/packages/bootstrap.scm and other files necessary to
> begin
> bootstrapping powerpc64-linux. I'll mainly be adapting the work that
> Leo already did, and following the lead of others like Efraim and his
> work on the wip-ppc branch. I will probably have questions as I go,
> so
> I'll ask on guix-devel.
>
> Please let me know if you'd like this done on a special branch.
>
Thank you
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-30 1:28 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2021-01-04 9:37 ` Ludovic Courtès
2021-01-04 11:16 ` Efraim Flashner
2021-01-05 3:15 ` Chris Marusich
0 siblings, 2 replies; 45+ messages in thread
From: Ludovic Courtès @ 2021-01-04 9:37 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
Hi,
Leo Le Bouter <lle-bout@zaclys.net> skribis:
> On Sat, 2020-12-19 at 23:28 -0800, Chris Marusich wrote:
>> Now that we have decided to use these powerpc64 bootstrap tarballs,
>> what
>> are the next steps for uploading them to the GNU FTP server? I've
>> never
>> done that before, and I don't think I have access. For now I've put
>> a
>> signed copy of the powerpc64-linux (big endian) bootstrap tarballs,
>> with
>> a SHA-512 hash, here:
>>
>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz
>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.asc
>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.sha512sum
[...]
> Can you do it? Upload the binaries on GNU FTP server? Little endian
> binaries will come along shortly as well.
Sure. IIUC, the tarballs at the URL above are for PPC64 (system type:
‘powerpc64-linux’); is this also going to work on PPC64LE hardware?
(As you know, we use i386 binaries for both i686-linux and x86_64-linux.
Likewise, if we can have a single set of binaries instead of having
PPC32, PPC64, and PPC64LE, that’s better.)
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-04 9:37 ` Ludovic Courtès
@ 2021-01-04 11:16 ` Efraim Flashner
2021-01-05 3:15 ` Chris Marusich
1 sibling, 0 replies; 45+ messages in thread
From: Efraim Flashner @ 2021-01-04 11:16 UTC (permalink / raw)
To: Ludovic Courtès
Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 2023 bytes --]
On Mon, Jan 04, 2021 at 10:37:20AM +0100, Ludovic Courtès wrote:
> Hi,
>
> Leo Le Bouter <lle-bout@zaclys.net> skribis:
>
> > On Sat, 2020-12-19 at 23:28 -0800, Chris Marusich wrote:
> >> Now that we have decided to use these powerpc64 bootstrap tarballs,
> >> what
> >> are the next steps for uploading them to the GNU FTP server? I've
> >> never
> >> done that before, and I don't think I have access. For now I've put
> >> a
> >> signed copy of the powerpc64-linux (big endian) bootstrap tarballs,
> >> with
> >> a SHA-512 hash, here:
> >>
> >> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz
> >> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.asc
> >> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.sha512sum
>
> [...]
>
> > Can you do it? Upload the binaries on GNU FTP server? Little endian
> > binaries will come along shortly as well.
>
> Sure. IIUC, the tarballs at the URL above are for PPC64 (system type:
> ‘powerpc64-linux’); is this also going to work on PPC64LE hardware?
>
> (As you know, we use i386 binaries for both i686-linux and x86_64-linux.
> Likewise, if we can have a single set of binaries instead of having
> PPC32, PPC64, and PPC64LE, that’s better.)
Last I checked the PPC32 binaries aren't working. Even cbmuser from
Debian thinks there may be a glibc bug with glibc-2.32 so I can't test
that much ATM¹.
Rather than effectively needing to wait to add ppc32 and ppc64 at the
same time it'd be better to add them individually and then do any
rebasing necessary to make them both work with ppc32 binaries later.
¹ If my patch fixes it I'll add glibc hacker to my résumé.
--
Efraim Flashner <efraim@flashner.co.il> אפרים פלשנר
GPG key = A28B F40C 3E55 1372 662D 14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-04 9:37 ` Ludovic Courtès
2021-01-04 11:16 ` Efraim Flashner
@ 2021-01-05 3:15 ` Chris Marusich
2021-01-06 8:59 ` Ludovic Courtès
1 sibling, 1 reply; 45+ messages in thread
From: Chris Marusich @ 2021-01-05 3:15 UTC (permalink / raw)
To: Ludovic Courtès
Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 3701 bytes --]
Hi Ludo,
Ludovic Courtès <ludo@gnu.org> writes:
>>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz
>>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.asc
>>> https://media.marusich.info/guix-ppc64-bootstrap/bootstrap-tarballs-from-guix-1ced8379c7.tar.xz.sha512sum
>
> [...]
>
> IIUC, the tarballs at the URL above are for PPC64 (system type:
> ‘powerpc64-linux’); is this also going to work on PPC64LE hardware?
No, we need a separate tarball for LE. I have prepared that here:
https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz
https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz.sha512sum
https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz.asc
This tarball, containing the little-endian bootstrap binaries, was
generated using the same setup that I used earlier for big-endian.
Specifically, to generate the little-endian bootstrap binaries, I took
the following steps on two separate VMs:
- Use
https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
to install Guix System 1.2.0 on an x86_64-linux machine.
- Run: guix pull --no-substitutes --commit=1ced8379c7641788fa607b19b7a66d18f045362b
- Run: guix pull --no-substitutes --commit=662e7e28d576ada91fc9dec7d27c100666114f03
- Run: guix build --no-substitutes --target=powerpc64le-linux-gnu bootstrap-tarballs
- I didn't run "guix system reconfigure" after installing Guix System;
theoretically it shouldn't matter, but for the purpose of our
experiment, I just left the system in its default configuration in
order to ensure that the kernel etc. would be the same on both VMs.
Notice that there are two "guix pull" invocations. This is because I
first pulled to 1ced8379c7641788fa607b19b7a66d18f045362b in order to
build the big-endian bootstrap-tarballs as described earlier. After
that, I pulled to 662e7e28d576ada91fc9dec7d27c100666114f03 in order to
build the little-endian bootstrap-tarballs on the same machine. In
theory it shouldn't matter how you arrive at commit
662e7e28d576ada91fc9dec7d27c100666114f03, but for the sake of
completeness and reproducibility I've included both pull steps.
By the way, just as with the big endian bootstrap binaries, all the
little endian bootstrap binaries I built were identical on both VMs
except for gcc-static. The output of gcc-static contained binaries that
differed in ways similar to what has been described earlier in this
thread. So, the non-reproducibility of gcc-static is not specific to
one PPC architecture. I wonder if gcc-static can be cross-built
reproducibly for any architecture at all.
> (As you know, we use i386 binaries for both i686-linux and x86_64-linux.
> Likewise, if we can have a single set of binaries instead of having
> PPC32, PPC64, and PPC64LE, that’s better.)
This is a fair question. I agree that if it were possible, it would be
a great improvement. I didn't know the answer to this question, so I
asked in #talos-workstation on Freenode. The users there said that
although in theory this should be possible, it isn't currently feasible
because the ability to do this is not currently implemented in Linux.
For the moment, I think our focus should be on finding out which of
these two architectures can be bootstrapped in Guix in the first place.
The first step in doing that is to try using these bootstrap binaries.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-12-28 4:23 ` Chris Marusich
` (2 preceding siblings ...)
2020-12-28 12:55 ` Leo Le Bouter via Bug reports for GNU Guix
@ 2021-01-05 3:54 ` Chris Marusich
3 siblings, 0 replies; 45+ messages in thread
From: Chris Marusich @ 2021-01-05 3:54 UTC (permalink / raw)
To: Leo Le Bouter; +Cc: 41669, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 2450 bytes --]
Chris Marusich <cmmarusich@gmail.com> writes:
> If it's just for the sake of trying one last time, we could just add
> --cores=1 to the Guix invocations, or run everything in a single-core
> VM. Wouldn't that have the same effect?
>
> I think you'll probably agree, so I've proactively started another build
> on two fresh single-core VMs (using the same procedure I described
> earlier, starting from the 1.2.0 installation ISO image). It'll take a
> few days to finish, I'm sure. Please let me know if you think we need
> the patch to run this final experiment. Otherwise, I'll just report the
> results of this latest experiment in a few days' time.
The builds finished on both of my VMs (new ones) the other day. The
result was the same as before: Even when built from source using a
single core and with --cores=1, gcc-static differed, and all other
binaries were identical. This is more evidence to support the
conclusion that the non-reproducibility is not due to concurrency.
For the record, this is the summary of the final experiment I did:
- I created two new x86_64 VMs using QEMU.
- I used
https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
to install Guix System 1.2.0 on these two VMs.
- I ran: guix pull --cores=1 --no-substitutes --commit=1ced8379c7641788fa607b19b7a66d18f045362b
- I ran: guix build --cores=1 --no-substitutes --target=powerpc64-linux-gnu bootstrap-tarballs
- I didn't run "guix system reconfigure" after installing Guix System;
theoretically it shouldn't matter, but for the purpose of our
experiment, I just left the system in its default configuration in
order to ensure that the kernel etc. would be the same on both VMs.
In reality, it didn't go so smoothly. While running "guix pull", the
build for guile failed many times before I got it to succeed, which
prompted me to submit this bug report:
"Guile 3 fails to build non-deterministically"
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=45574
While running "guix pull", the build for gnutls failed many times and
never succeeded - so I actually did substitute gnutls. I submitted a
bug report for that one here, too:
"gnutls 3.6.12 can consistently fail to build"
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=45578
In any case, this confirms Leo's findings. It's clear that concurrency
is not the reason why gcc-static builds non-reproducibly.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-05 3:15 ` Chris Marusich
@ 2021-01-06 8:59 ` Ludovic Courtès
2021-01-11 10:31 ` Chris Marusich
0 siblings, 1 reply; 45+ messages in thread
From: Ludovic Courtès @ 2021-01-06 8:59 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 3334 bytes --]
Hi Chris,
Chris Marusich <cmmarusich@gmail.com> skribis:
> No, we need a separate tarball for LE. I have prepared that here:
>
> https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz
> https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz.sha512sum
> https://media.marusich.info/guix-ppc64le-bootstrap/powerpc64le-linux-gnu-bootstrap-tarballs-from-guix-662e7e28d576.tar.xz.asc
Thanks. I have uploaded them to
<https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106>
(I meant to send them to ftp.gnu.org but typed it wrong; I can upload
them there as well later.)
You can update (gnu packages bootstrap) accordingly.
> This tarball, containing the little-endian bootstrap binaries, was
> generated using the same setup that I used earlier for big-endian.
> Specifically, to generate the little-endian bootstrap binaries, I took
> the following steps on two separate VMs:
>
> - Use
> https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
> to install Guix System 1.2.0 on an x86_64-linux machine.
> - Run: guix pull --no-substitutes --commit=1ced8379c7641788fa607b19b7a66d18f045362b
> - Run: guix pull --no-substitutes --commit=662e7e28d576ada91fc9dec7d27c100666114f03
> - Run: guix build --no-substitutes --target=powerpc64le-linux-gnu bootstrap-tarballs
> - I didn't run "guix system reconfigure" after installing Guix System;
> theoretically it shouldn't matter, but for the purpose of our
> experiment, I just left the system in its default configuration in
> order to ensure that the kernel etc. would be the same on both VMs.
In the commit log that updates (gnu packages bootstrap), please mention
these commands so we later know how those binaries were obtained. (Only
the second ‘guix pull’ matters.)
> By the way, just as with the big endian bootstrap binaries, all the
> little endian bootstrap binaries I built were identical on both VMs
> except for gcc-static. The output of gcc-static contained binaries that
> differed in ways similar to what has been described earlier in this
> thread. So, the non-reproducibility of gcc-static is not specific to
> one PPC architecture. I wonder if gcc-static can be cross-built
> reproducibly for any architecture at all.
Yeah, that remains a mystery, perhaps we’ll eventually find out!
>> (As you know, we use i386 binaries for both i686-linux and x86_64-linux.
>> Likewise, if we can have a single set of binaries instead of having
>> PPC32, PPC64, and PPC64LE, that’s better.)
>
> This is a fair question. I agree that if it were possible, it would be
> a great improvement. I didn't know the answer to this question, so I
> asked in #talos-workstation on Freenode. The users there said that
> although in theory this should be possible, it isn't currently feasible
> because the ability to do this is not currently implemented in Linux.
>
> For the moment, I think our focus should be on finding out which of
> these two architectures can be bootstrapped in Guix in the first place.
> The first step in doing that is to try using these bootstrap binaries.
Yes, that makes sense to me.
Thank you!
Ludo’.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 853 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-06 8:59 ` Ludovic Courtès
@ 2021-01-11 10:31 ` Chris Marusich
2021-01-21 6:26 ` Chris Marusich
2021-01-31 21:35 ` Ludovic Courtès
0 siblings, 2 replies; 45+ messages in thread
From: Chris Marusich @ 2021-01-11 10:31 UTC (permalink / raw)
To: Ludovic Courtès
Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1.1: Type: text/plain, Size: 8566 bytes --]
Hi Ludo,
Ludovic Courtès <ludo@gnu.org> writes:
> You can update (gnu packages bootstrap) accordingly.
Thank you for uploading the little-endian bootstrap binaries! I've
downloaded them, and I confirm that they are identical to the ones I
built. Do you also plan to upload the big-endian bootstrap binaries? I
think we were hoping to try both system types.
I'm afraid I've hit a snag using what you've uploaded, though. It looks
like we'll need to extract bash, mkdir, tar, and xz from
static-binaries-0-powerpc64le-linux-gnu.tar.xz and place a copy of each
in the following locations:
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/bash
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/mkdir
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/tar
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/xz
Could you do that? The reason why it's necessary is described below.
I've started making changes locally to (gnu packages bootstrap). So
far, with the attached patch, I'm able to do the following things on my
POWER9 machine running ppc64le Debian (unstable).
I can successfully build Guix from source using Debian packages (and a
manually-built copy of guile-avahi and guile-gnutls). With my patch, I
still have to supply the "--with-courage" configure option. Although
"make" succeeded, "make check" failed on the following tests:
- tests/build-utils.scm
- test/challenge.scm
- tests/containers.scm
- tests/debug-link.scm
The failures fell into two categories:
- Some tests couldn't download the bootstrap bash.
- In tests/containers.scm, call-with-container evaluated to #f when it
wasn't supposed to.
Nevertheless, I created the necessary build users and started the
guix-daemon via pre-inst-env. I then tried building a simple package:
./pre-inst-env guix build -e '(@@ (gnu packages bootstrap) %bootstrap-coreutils&co)'
The result was promising, but it quickly failed like some of the tests
did - it couldn't download the bash bootstrap binary:
--8<---------------cut here---------------start------------->8---
marusich@suzaku:~/repos/guix$ ./pre-inst-env guix build -e '(@@ (gnu packages bootstrap) %bootstrap-coreutils&co)'
substitute: guix substitute: warning: ACL for archive imports seems to be uninitialized, substitutes may be unavailable
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
The following derivations will be built:
/gnu/store/y9868ab6a4wjcvwzj4ln5fzk1y4y6zpz-bootstrap-binaries-0.drv
/gnu/store/2nwml4l272qzq034hwf5icv9vxi813ja-xz.drv
/gnu/store/c1v9lmsh0awbhpai72mzw4qv02rrbpw6-module-import-compiled.drv
/gnu/store/n5hf44bybvqmsybjvnn61pkpmcdcrlbd-guile-bootstrap-2.0.drv
/gnu/store/ix4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv
/gnu/store/jxh9xn77flxarwzcjga485pgrkjknrgb-tar.drv
/gnu/store/yd1mib8s1f38qwdn61zj16ijx8p0ryzm-guile-static-stripped-2.0.14-powerpc64le-linux-gnu.tar.xz.drv
/gnu/store/z66wc9z4qvffn60q4jdx7in6rxpswhx3-mkdir.drv
/gnu/store/m4qv668s851v2ndzns3xwzg5rga9fhff-static-binaries-0-powerpc64le-linux-gnu.tar.xz.drv
building /gnu/store/m4qv668s851v2ndzns3xwzg5rga9fhff-static-binaries-0-powerpc64le-linux-gnu.tar.xz.drv...
Starting download of /gnu/store/2phdifnfw6i989rqbav04zakxx7qb165-static-binaries-0-powerpc64le-linux-gnu.tar.xz
From https://ftp.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz...
download failed "https://ftp.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz" 404 "Not Found"
Starting download of /gnu/store/2phdifnfw6i989rqbav04zakxx7qb165-static-binaries-0-powerpc64le-linux-gnu.tar.xz
From https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz...
downloading from https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz ...
static-binaries-0-powerpc64le-linux-gnu.tar.xz 4.4MiB 2.8MiB/s 00:02 [##################] 100.0%
successfully built /gnu/store/m4qv668s851v2ndzns3xwzg5rga9fhff-static-binaries-0-powerpc64le-linux-gnu.tar.xz.drv
building /gnu/store/ix4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv...
Starting download of /gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash
From https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/powerpc64le-linux/20210106/bash...
download failed "https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/powerpc64le-linux/20210106/bash" 404 "Not found"
Starting download of /gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash
From http://lilypond.org/janneke/guix/powerpc64le-linux/20210106/bash...
download failed "http://lilypond.org/janneke/guix/powerpc64le-linux/20210106/bash" 404 "Not Found"
Starting download of /gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash
From https://ci.guix.gnu.org/file/bash/sha256/1kiw7n6mkdy2x9in97646nb7aiayxr090ws1hbrlazah3fjqi6nj...
download failed "https://ci.guix.gnu.org/file/bash/sha256/1kiw7n6mkdy2x9in97646nb7aiayxr090ws1hbrlazah3fjqi6nj" 404 "Not Found"
Starting download of /gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash
From https://tarballs.nixos.org/sha256/1kiw7n6mkdy2x9in97646nb7aiayxr090ws1hbrlazah3fjqi6nj...
download failed "https://tarballs.nixos.org/sha256/1kiw7n6mkdy2x9in97646nb7aiayxr090ws1hbrlazah3fjqi6nj" 404 "Not Found"
Starting download of /gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash
From https://archive.softwareheritage.org/api/1/content/sha256:d29a88a51b507d45f38241739040ee5e45759635c49c6463eac2b7598d3d3cce/raw/...
download failed "https://archive.softwareheritage.org/api/1/content/sha256:d29a88a51b507d45f38241739040ee5e45759635c49c6463eac2b7598d3d3cce/raw/" 404 "Not Found"
failed to download "/gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash" from ("https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/powerpc64le-linux/20210106/bash" "http://lilypond.org/janneke/guix/powerpc64le-linux/20210106/bash")
builder for `/gnu/store/ix4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv' failed to produce output path `/gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash'
build of /gnu/store/ix4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv failed
View build log at '/var/log/guix/drvs/ix/4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv.gz'.
cannot build derivation `/gnu/store/n5hf44bybvqmsybjvnn61pkpmcdcrlbd-guile-bootstrap-2.0.drv': 1 dependencies couldn't be built
building /gnu/store/jxh9xn77flxarwzcjga485pgrkjknrgb-tar.drv...
cannot build derivation `/gnu/store/y9868ab6a4wjcvwzj4ln5fzk1y4y6zpz-bootstrap-binaries-0.drv': 1 dependencies couldn't be built
guix build: error: build of `/gnu/store/y9868ab6a4wjcvwzj4ln5fzk1y4y6zpz-bootstrap-binaries-0.drv' failed
--8<---------------cut here---------------end--------------->8---
To resolve this issue, it seems that we must also extract the bootstrap
bash, mkdir, tar, and xz from
static-binaries-0-powerpc64le-linux-gnu.tar.xz and place a copy of each
in the following locations:
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/bash
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/mkdir
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/tar
- https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/xz
After you've uploaded these files, I'll also need to adjust my patch so
it adds alpha.gnu.org to %bootstrap-executable-base-urls in
gnu/packages/bootstrap.scm. That's how Guix finds these raw, unpackaged
binaries.
By the way, I've noticed that the other architectures don't seem to have
"raw" binaries at all on alpha.gnu.org. Maybe you already knew this,
but it seems that the "raw" binaries are actually downloaded from this
specific URL (see the bootstrap-executable-file-name procedure):
https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/?id=44f07d1dc6806e97c4e9ee3e6be883cc59dc666e
Is that intended? I was surprised to discover that we store these four
"raw" binaries in a totally separate place. That seems like it would
make it easy for someone to accidentally forget to update the "raw"
binaries when they update an architecture's bootstrap tarballs.
In any case, for powerpc64le-linux, the right thing to do is probably
just to add copies of these "raw" binaries like I mentioned above.
Could you do that when you have the time?
Thank you,
--
Chris
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: 0001-gnu-bootstrap-Add-support-for-powerpc64le-linux.patch --]
[-- Type: text/x-patch, Size: 8637 bytes --]
From eb41c77618538f1f6c2994c9245d38c377ac12ad Mon Sep 17 00:00:00 2001
From: Chris Marusich <cmmarusich@gmail.com>
Date: Sun, 10 Jan 2021 16:58:57 -0800
Subject: [PATCH] gnu: bootstrap: Add support for powerpc64le-linux.
The bootstrap tarballs used by these bootstrap packages were created via the
following steps:
- Create a new x86_64 VM using QEMU.
- Use
https://ftp.gnu.org/gnu/guix/guix-system-install-1.2.0.x86_64-linux.iso.xz
to install Guix System 1.2.0 in the VM.
- Run: guix pull --no-substitutes --commit=662e7e28d576ada91fc9dec7d27c100666114f03
- Run: guix build --no-substitutes --target=powerpc64le-linux-gnu bootstrap-tarballs
With the exception of gcc-static, all bootstrap binaries contained in these
tarballs can be built reproducibly. Unfortunately, gcc-static is not always
reproducible when everything is built from source on separate machines.
Despite months of investigation, we still do not know why that is, so we have
decided to move forward with these binaries to unblock further bootstrapping
work. For details, see <https://bugs.gnu.org/41669>, which contains a
discussion of both the big-endian and little-endian cases.
* gnu/packages/bootstrap.scm (%bootstrap-executables)
(bootstrap-executable-file-name, bootstrap-guile-url-path)
(bootstrap-guile-hash, %bootstrap-coreutils&co, %bootstrap-binutils)
(%bootstrap-glibc, %bootstrap-gcc): Add entries for powerpc64le-linux.
---
gnu/packages/bootstrap.scm | 36 +++++++++++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/gnu/packages/bootstrap.scm b/gnu/packages/bootstrap.scm
index c39e60ec8b..d9ba9f06c6 100644
--- a/gnu/packages/bootstrap.scm
+++ b/gnu/packages/bootstrap.scm
@@ -122,7 +122,16 @@
("tar"
,(base32 "06gmqdjq3rl8lr47b9fyx4ifnm5x56ymc8lyryp1ax1j2s4y5jb4"))
("xz"
- ,(base32 "09j1d69qr0hhhx4k4ih8wp00dfc9y4rp01hfg3vc15yxd0jxabh5")))))
+ ,(base32 "09j1d69qr0hhhx4k4ih8wp00dfc9y4rp01hfg3vc15yxd0jxabh5")))
+ ("powerpc64le-linux"
+ ("bash"
+ ,(base32 "1kiw7n6mkdy2x9in97646nb7aiayxr090ws1hbrlazah3fjqi6nj"))
+ ("mkdir"
+ ,(base32 "04dpvi231zcl40ig048vqqnyvmnkw1byrm1q1qqvs1f0g16yhrrk"))
+ ("tar"
+ ,(base32 "150c8948cz8r208g6qgn2dn4f4zs5kpgbpbg6bwag6yw42rapw2l"))
+ ("xz"
+ ,(base32 "0v5738idy9pqzcbrjdpxi5c6qs5m78zrpsydmrpx5cfcfzbkxzjh")))))
(define %bootstrap-executable-base-urls
;; This is where the bootstrap executables come from.
@@ -132,6 +141,7 @@
(define (bootstrap-executable-file-name system program)
"Return the FILE-NAME part of url where PROGRAM can be found for SYSTEM."
(match system
+ ("powerpc64le-linux" (string-append system "/20210106/" program))
("i586-gnu" (string-append system "/20200326/" program))
(_ (string-append system "/" program
"?id=44f07d1dc6806e97c4e9ee3e6be883cc59dc666e"))))
@@ -332,6 +342,8 @@ or false to signal an error."
"/20150101/guile-2.0.11.tar.xz")
("i586-gnu"
"/20200326/guile-static-stripped-2.0.14-i586-pc-gnu.tar.xz")
+ ("powerpc64le-linux"
+ "/20210106/guile-static-stripped-2.0.14-powerpc64le-linux-gnu.tar.xz")
(_
"/20131110/guile-2.0.9.tar.xz"))))
@@ -346,6 +358,8 @@ or false to signal an error."
(base32 "0fzp93lvi0hn54acc0fpvhc7bvl0yc853k62l958cihk03q80ilr"))
("armhf-linux"
(base32 "1mi3brl7l58aww34rawhvja84xc7l1b4hmwdmc36fp9q9mfx0lg5"))
+ ("powerpc64le-linux"
+ (base32 "1rnyfz5q38jyvxddj617443bnnzql4vw0mxzqpj8wz48wx4bhbq0"))
("aarch64-linux"
(base32 "1giy2aprjmn5fp9c4s9r125fljw4wv6ixy5739i5bffw4jgr0f9r"))
("i586-gnu"
@@ -479,6 +493,8 @@ $out/bin/guile --version~%"
"/20150101/static-binaries.tar.xz")
("aarch64-linux"
"/20170217/static-binaries.tar.xz")
+ ("powerpc64le-linux"
+ "/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz")
("i586-gnu"
"/20200326/static-binaries-0-i586-pc-gnu.tar.xz")
(_
@@ -498,6 +514,9 @@ $out/bin/guile --version~%"
("aarch64-linux"
(base32
"18dfiq6c6xhsdpbidigw6480wh0vdgsxqq3xindq4lpdgqlccpfh"))
+ ("powerpc64le-linux"
+ (base32
+ "0afs2j9z2d1hjq42myz4iwjh0aqgzf59inifw87x6b6p1z9wv92v"))
("i586-gnu"
(base32
"17kllqnf3fg79gzy9ansgi801c46yh9c23h4d923plvb0nfm1cfn"))
@@ -547,6 +566,8 @@ $out/bin/guile --version~%"
"/20150101/binutils-2.25.tar.xz")
("aarch64-linux"
"/20170217/binutils-2.27.tar.xz")
+ ("powerpc64le-linux"
+ "/20210106/binutils-static-stripped-2.34-powerpc64le-linux-gnu.tar.xz")
("i586-gnu"
"/20200326/binutils-static-stripped-2.34-i586-pc-gnu.tar.xz")
(_
@@ -566,6 +587,9 @@ $out/bin/guile --version~%"
("aarch64-linux"
(base32
"111s7ilfiby033rczc71797xrmaa3qlv179wdvsaq132pd51xv3n"))
+ ("powerpc64le-linux"
+ (base32
+ "1klxy945c61134mzhqzz2gbk8w0n8jq7arwkrvz78d22ff2q0cwz"))
("i586-gnu"
(base32
"11kykv1kmqc5wln57rs4klaqa13hm952smkc57qcsyss21kfjprs"))
@@ -622,6 +646,8 @@ $out/bin/guile --version~%"
"/20150101/glibc-2.20.tar.xz")
("aarch64-linux"
"/20170217/glibc-2.25.tar.xz")
+ ("powerpc64le-linux"
+ "/20210106/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz")
("i586-gnu"
"/20200326/glibc-stripped-2.31-i586-pc-gnu.tar.xz")
(_
@@ -641,6 +667,9 @@ $out/bin/guile --version~%"
("aarch64-linux"
(base32
"07nx3x8598i2924rjnlrncg6rm61c9bmcczbbcpbx0fb742nvv5c"))
+ ("powerpc64le-linux"
+ (base32
+ "151kjsai25vz2s667bgzpisx8f281fpl3n9pxz2yrp9jlnadz3m1"))
("i586-gnu"
(base32
"14ddm10lpbas8bankmn5bcrlqvz1v5dnn1qjzxb19r57vd2w5952"))
@@ -713,6 +742,8 @@ exec ~a/bin/.gcc-wrapped -B~a/lib \
"/20150101/gcc-4.8.4.tar.xz")
("aarch64-linux"
"/20170217/gcc-5.4.0.tar.xz")
+ ("powerpc64le-linux"
+ "/20210106/gcc-stripped-5.5.0-powerpc64le-linux-gnu.tar.xz")
("i586-gnu"
"/20200326/gcc-stripped-5.5.0-i586-pc-gnu.tar.xz")
(_
@@ -732,6 +763,9 @@ exec ~a/bin/.gcc-wrapped -B~a/lib \
("aarch64-linux"
(base32
"1ar3vdzyqbfm0z36kmvazvfswxhcihlacl2dzdjgiq25cqnq9ih1"))
+ ("powerpc64le-linux"
+ (base32
+ "151kjsai25vz2s667bgzpisx8f281fpl3n9pxz2yrp9jlnadz3m1"))
("i586-gnu"
(base32
"1j2zc58wzil71a34h7c70sd68dmqvcscrw3rmn2whq79vd70zvv5"))
--
2.26.2
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply related [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-11 10:31 ` Chris Marusich
@ 2021-01-21 6:26 ` Chris Marusich
2021-01-31 21:35 ` Ludovic Courtès
1 sibling, 0 replies; 45+ messages in thread
From: Chris Marusich @ 2021-01-21 6:26 UTC (permalink / raw)
To: Ludovic Courtès
Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
[-- Attachment #1: Type: text/plain, Size: 295 bytes --]
Hi Ludo,
I hope you're doing well! If you can find the time to upload those
"raw" binaries, too, we can continue trying to bootstrap. For details,
please refer to my last message, here:
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=41669#128
Thank you for your help!
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2021-01-11 10:31 ` Chris Marusich
2021-01-21 6:26 ` Chris Marusich
@ 2021-01-31 21:35 ` Ludovic Courtès
1 sibling, 0 replies; 45+ messages in thread
From: Ludovic Courtès @ 2021-01-31 21:35 UTC (permalink / raw)
To: Chris Marusich; +Cc: 41669, Leo Le Bouter, Maxim Cournoyer, Vincent Legoll
Hi Chris & all,
Apologies for taking so long to reply! Pinging me on IRC was the right
move. :-)
Chris Marusich <cmmarusich@gmail.com> skribis:
> I'm afraid I've hit a snag using what you've uploaded, though. It looks
> like we'll need to extract bash, mkdir, tar, and xz from
> static-binaries-0-powerpc64le-linux-gnu.tar.xz and place a copy of each
> in the following locations:
>
> - https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/bash
> - https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/mkdir
> - https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/tar
> - https://alpha.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/xz
>
> Could you do that? The reason why it's necessary is described below.
I’ve uploaded these four files now.
> I've started making changes locally to (gnu packages bootstrap). So
> far, with the attached patch, I'm able to do the following things on my
> POWER9 machine running ppc64le Debian (unstable).
>
> I can successfully build Guix from source using Debian packages (and a
> manually-built copy of guile-avahi and guile-gnutls). With my patch, I
> still have to supply the "--with-courage" configure option. Although
> "make" succeeded, "make check" failed on the following tests:
>
> - tests/build-utils.scm
> - test/challenge.scm
> - tests/containers.scm
> - tests/debug-link.scm
>
> The failures fell into two categories:
>
> - Some tests couldn't download the bootstrap bash.
> - In tests/containers.scm, call-with-container evaluated to #f when it
> wasn't supposed to.
Perhaps we can investigate them later.
> Nevertheless, I created the necessary build users and started the
> guix-daemon via pre-inst-env. I then tried building a simple package:
>
> ./pre-inst-env guix build -e '(@@ (gnu packages bootstrap) %bootstrap-coreutils&co)'
[...]
> Starting download of /gnu/store/2phdifnfw6i989rqbav04zakxx7qb165-static-binaries-0-powerpc64le-linux-gnu.tar.xz
> From https://ftp.gnu.org/gnu/guix/bootstrap/powerpc64le-linux/20210106/static-binaries-0-powerpc64le-linux-gnu.tar.xz...
> failed to download "/gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash" from ("https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/powerpc64le-linux/20210106/bash" "http://lilypond.org/janneke/guix/powerpc64le-linux/20210106/bash")
> builder for `/gnu/store/ix4mpvzxfi1hrmvdmmpgqhm9x1cdh347-bash.drv' failed to produce output path `/gnu/store/0kaj6l1ccw0qd0289hii7qhr828s71sv-bash'
Note that for testing purposes, you could always work around this by
adding these four files to the store with the ‘add-to-store’ RPC (I
don’t think ‘guix download’ would work because you need the executable
bit.)
> By the way, I've noticed that the other architectures don't seem to have
> "raw" binaries at all on alpha.gnu.org. Maybe you already knew this,
> but it seems that the "raw" binaries are actually downloaded from this
> specific URL (see the bootstrap-executable-file-name procedure):
>
> https://git.savannah.gnu.org/cgit/guix.git/plain/gnu/packages/bootstrap/?id=44f07d1dc6806e97c4e9ee3e6be883cc59dc666e
>
> Is that intended?
Yes: these files used to be in version control, part of the Guix source
tarball, but now we just download them (commit
836a85da0e8609d40716581be00802ee43463038).
> I was surprised to discover that we store these four "raw" binaries in
> a totally separate place. That seems like it would make it easy for
> someone to accidentally forget to update the "raw" binaries when they
> update an architecture's bootstrap tarballs.
They’re visible in the dependency graph though, and they don’t need to
ever change.
Ludo’.
^ permalink raw reply [flat|nested] 45+ messages in thread
* bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible
2020-09-26 6:52 ` Chris Marusich
2020-10-05 12:33 ` Ludovic Courtès
2020-10-05 12:47 ` Efraim Flashner
@ 2021-02-27 2:39 ` Chris Marusich
2 siblings, 0 replies; 45+ messages in thread
From: Chris Marusich @ 2021-02-27 2:39 UTC (permalink / raw)
To: 41669; +Cc: Vincent Legoll, Léo Le Bouter, Maxim Cournoyer
[-- Attachment #1.1: Type: text/plain, Size: 487 bytes --]
Hi,
Chris Marusich <cmmarusich@gmail.com> writes:
> Going forward, I'm not sure how best to investigate the inputs to find
> out what's causing the differences. I just know I really, really,
> really don't want to rebuild everything multiple times, since it takes
> hours/days. If you have any creative ideas for how to speed up the
> investigation, I'm all ears.
I've analyzed the graph of derivations that produce differing output
across machines. Here's an image of the graph:
[-- Attachment #1.2: Graph of Nonreproducible Derivations (PNG) --]
[-- Type: image/png, Size: 82643 bytes --]
[-- Attachment #1.3: Type: text/plain, Size: 74 bytes --]
And here is the GraphViz source, which you can render however you want:
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.4: Graph of Nonreproducible Derivations (GraphViz) --]
[-- Type: text/vnd.graphviz, Size: 12491 bytes --]
digraph "Differing Derivations" {
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" [label = "glibc-mesboot-2.16.0", shape = box, fontname = sans]
"/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv" [label = "xz-mesboot-5.0.0", shape = box, fontname = sans]
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" [label = "binutils-mesboot-2.20.1a", shape = box, fontname = sans]
"/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv" [label = "bootar-1a", shape = box, fontname = sans]
"/gnu/store/5x8a1yib7vdza727vrq4zmp6cmsafy7h-module-import-compiled.drv" [label = "module-import-compiled-1", shape = box, fontname = sans]
"/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv" [label = "gcc-mesboot1-4.6.4", shape = box, fontname = sans]
"/gnu/store/alvrmh47xqk7glq9wmvrzivfjp2bcvyc-module-import-compiled.drv" [label = "module-import-compiled-2", shape = box, fontname = sans]
"/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv" [label = "gcc-core-mesboot0-2.95.3", shape = box, fontname = sans]
"/gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv" [label = "gcc-4.9.4.tar.xz", shape = box, fontname = sans]
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" [label = "gcc-mesboot0-2.95.3", shape = box, fontname = sans]
"/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv" [label = "module-import-compiled-3", shape = box, fontname = sans]
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" [label = "gcc-7.5.0", shape = box, fontname = sans]
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" [label = "glibc-mesboot0-2.2.5", shape = box, fontname = sans]
"/gnu/store/i5wn3xl6p0zw1vglscgk0bs9dwc6hdh6-gcc-static-5.5.0.drv" [label = "gcc-static-5.5.0", shape = box, fontname = sans]
"/gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv" [label = "gcc-7.5.0.tar.xz", shape = box, fontname = sans]
"/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv" [label = "libstdc++-7.5.0", shape = box, fontname = sans]
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" [label = "binutils-mesboot1-2.14", shape = box, fontname = sans]
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" [label = "binutils-cross-boot0-2.34", shape = box, fontname = sans]
"/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv" [label = "gash-utils-boot-0.1.0", shape = box, fontname = sans]
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" [label = "gcc-mesboot-4.9.4", shape = box, fontname = sans]
"/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv" [label = "gash-boot-0.2.0", shape = box, fontname = sans]
"/gnu/store/i5wn3xl6p0zw1vglscgk0bs9dwc6hdh6-gcc-static-5.5.0.drv" -> "/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv"
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" -> "/gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv"
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" -> "/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv"
"/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv" -> "/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv"
"/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv" -> "/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv"
"/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv" -> "/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv"
"/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv" -> "/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv"
"/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv" -> "/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv"
"/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv" -> "/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv"
"/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv" -> "/gnu/store/alvrmh47xqk7glq9wmvrzivfjp2bcvyc-module-import-compiled.drv"
"/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv" -> "/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv"
"/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv" -> "/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv"
"/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv" -> "/gnu/store/alvrmh47xqk7glq9wmvrzivfjp2bcvyc-module-import-compiled.drv"
"/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv" -> "/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv"
"/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv" -> "/gnu/store/alvrmh47xqk7glq9wmvrzivfjp2bcvyc-module-import-compiled.drv"
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" -> "/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv"
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" -> "/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv"
"/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv" -> "/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv"
"/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv" -> "/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv"
"/gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv" -> "/gnu/store/5x8a1yib7vdza727vrq4zmp6cmsafy7h-module-import-compiled.drv"
"/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv" -> "/gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv"
"/gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv" -> "/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv"
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" -> "/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv"
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" -> "/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv"
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv" -> "/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv"
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" -> "/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv"
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" -> "/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv"
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" -> "/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv"
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" -> "/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv"
"/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv" -> "/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv"
"/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv" -> "/gnu/store/d1g7i2w8k1g5jrx4n6xv4q8xnrlmz8f3-module-import-compiled.drv"
"/gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv" -> "/gnu/store/5x8a1yib7vdza727vrq4zmp6cmsafy7h-module-import-compiled.drv"
}
[-- Attachment #1.5: Type: text/plain, Size: 244 bytes --]
I generated the GraphViz source by manually massaging the output of the
following script, which walks the graph of derivations that produce an
output that differs across machines, starting with the derivation that
cross-compiles %gcc-static:
[-- Attachment #1.6: Script to Analyze Derivations --]
[-- Type: text/plain, Size: 6343 bytes --]
(use-modules
(guix ssh)
(guix packages)
(guix derivations)
(guix store)
(guix inferior)
(srfi srfi-9)
(srfi srfi-1)
(ice-9 match))
;; A very janky script to compare derivation outputs on two machines.
;; The basic idea is to start from a derivation that is known to
;; produce an output that differs on two machines. We walk the graph
;; of inputs starting from that derivation (an input here is a
;; combination of a derivation and an output, such as "out" or
;; "static"). As we go, we record the derivations that produced a
;; differing output on the two machines. We stop once there are no
;; more such inputs to walk.
;;
;; It is expected that any derivations under examination have already
;; been built on both machines. It's probably best to just build the
;; root derivation on both machines before running this script. Make
;; sure you build without using substitutes, since we're trying to
;; compare reproducibility between machines when built from source.
;;
;; This script was written under the assumption that all machines
;; - the local machine, gs1, and gs2 - are using the same version of
;; Guix. Run this script with: "guix repl the-script.scm"
(define gs1-eval
(let* ((session-gs1 (open-ssh-session "gs1"))
(inferior-gs1 (remote-inferior session-gs1)))
(lambda (exp)
(inferior-eval exp inferior-gs1))))
(define gs2-eval
(let* ((session-gs2 (open-ssh-session "gs2"))
(inferior-gs2 (remote-inferior session-gs2)))
(lambda (exp)
(inferior-eval exp inferior-gs2))))
;; Represent edges in a graph as pairs.
(define (make-edge from to)
(cons from to))
(define (edge-from edge)
(car edge))
(define (edge-to edge)
(cdr edge))
(define (get-inputs drv)
(pk 'get-inputs drv)
;; return the inputs of drv (according to gs1, or gs2, or locally)
;; one input is e.g. ("/gnu/store/...foo.drv" ("out")) - a
;; two-element list.
(gs1-eval
`(map (lambda (input)
(list (derivation-input-path input)
(derivation-input-sub-derivations input)))
(derivation-inputs (read-derivation-from-file ,drv)))))
;; Evaluate to the recursive SHA-256 hash, as a string, of the output
;; path.
(define (compute-hash-exp file)
(pk 'compute-hash-exp file)
`(let-values (((port get-hash)
(open-hash-port (lookup-hash-algorithm 'sha256))))
(write-file ,file port)
(force-output port)
(bytevector->nix-base32-string (get-hash))))
(define (get-drv-output-paths drv output-names)
(pk 'get-drv-output-paths drv output-names)
;; from any of gs1 or gs2 or local
(sort-list
(gs1-eval
`(filter-map (match-lambda
((name . output)
(if (member name ',output-names)
(derivation-output-path output)
#f)))
(derivation-outputs (read-derivation-from-file ,drv))))
string<))
(define (get-hashes-gs1 files)
(pk 'get-hashes-gs1 files)
(sort-list
(map (lambda (file)
;; There aren't usually many outputs, so connecting once per
;; output isn't so bad.
(gs1-eval (compute-hash-exp file)))
files)
string<))
(define (get-hashes-gs2 files)
(pk 'get-hashes-gs2 files)
(sort-list
(map (lambda (file)
;; There aren't usually many outputs, so connecting once per
;; output isn't so bad.
(gs2-eval (compute-hash-exp file)))
files)
string<))
;; differs for some output.
(define (any-output-differs-on-gs1-and-gs2 drv outputs)
(pk 'any-output-differs-on-gs1-and-gs2 drv outputs)
(let* ((drv-output-paths (get-drv-output-paths drv outputs))
(hashes-gs1 (get-hashes-gs1 drv-output-paths))
(hashes-gs2 (get-hashes-gs2 drv-output-paths)))
(any (lambda (hash-gs1 hash-gs2)
(not (string= hash-gs1 hash-gs2)))
hashes-gs1
hashes-gs2)))
(define (get-bad-drvs inputs)
(pk 'get-bad-drvs inputs)
;; return the drvs that are not identical on gs1 and gs2
(filter-map (match-lambda
((drv outputs)
(if (any-output-differs-on-gs1-and-gs2 drv outputs)
(begin
(display "Differs: ")
(display drv)
(newline)
;; Without the outputs because the entire drv
;; must be run in order to build any outputs.
drv)
#f)))
inputs))
(define visited
(make-hash-table))
;; from-drv is assumed to be bad.
;; The bad-drvs returned are a list of edges describing the graph of bad derivations.
(define (get-bad-drv-edges from-drv)
(pk 'get-bad-drv-edges from-drv)
;; Don't visit the same node twice, to avoid loops.
(if (hash-ref visited from-drv)
'()
(begin
(hash-set! visited from-drv #t)
(let* ((inputs (get-inputs from-drv))
(bad-drvs (get-bad-drvs inputs))
(bad-drv-edges (map (lambda (bad-drv)
(make-edge from-drv bad-drv))
bad-drvs)))
(append bad-drv-edges
(append-map (lambda (bad-drv)
(get-bad-drv-edges bad-drv))
bad-drvs))))))
(pk 'gs1-use-modules
(gs1-eval
'(use-modules (guix)
(ice-9 match)
(srfi srfi-1)
(srfi srfi-11)
(gcrypt hash)
(guix serialization))))
(pk 'gs2-use-modules
(gs2-eval
'(use-modules (guix)
(ice-9 match)
(srfi srfi-1)
(srfi srfi-11)
(gcrypt hash)
(guix serialization))))
;; guix build -d --target=powerpc64-linux-gnu --no-grafts -e '(@@ (gnu packages make-bootstrap) %gcc-static)'
(define root-drv
"/gnu/store/i5wn3xl6p0zw1vglscgk0bs9dwc6hdh6-gcc-static-5.5.0.drv")
(call-with-output-file "/tmp/myedges"
(lambda (port)
(write (get-bad-drv-edges root-drv) port)))
(display "done")
(newline)
[-- Attachment #1.7: Type: text/plain, Size: 7148 bytes --]
This graph shows the derivations that produce differing outputs across
two Guix System machines, when everything is built without substitutes,
walking the graph of inputs starting from the derivation that
cross-compiles %gcc-static for powerpc64-linux-gnu (from x86_64-linux)
using Guix at commit 1ced8379c7641788fa607b19b7a66d18f045362b. If the
non-reproducibility (across systems) of %gcc-static is caused by a
similarly non-reproducible input, it's probably caused by one or more of
the derivations in this graph. This graph is significantly smaller than
the graph of all derivations, but it still includes 21 derivations.
Some things I noticed while looking at the graph:
- It's suspicious that the module-import-compiled derivations are all at
the bottom. I spot-checked the output of one of the
module-import-compiled derivations on both machines and found that the
.go files differed.
- Every derivation except the root (gcc-static-5.5.0-drv) uses
/gnu/store/0dn61y4n8ig333b23hmc80hvlcy8gdli-guile-bootstrap-2.0.drv as
an input. The root uses
/gnu/store/b5nnbpgkvgdpzgvj67539ylcaqacj90l-guile-3.0.2.drv.
- Strangely,
/gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv is
non-reproducible, even though it just builds a tarball. The tarball
itself does differ on the two systems, but the contents, when
extracted, are identical.
- Some of the derivations in the graph are reproducible when built
locally via "guix build --check"; however, some are not reproducible.
For every derivation, if it was reproducible locally on gs1, it was
also reproducible on gs2, and if it was not reproducible on gs1, it
was also not reproducible on gs2. Here is the full report:
--8<---------------cut here---------------start------------->8---
rm -f /tmp/mylog && for drv in $(</tmp/drvs); do if guix build --check $drv; then echo OK: $drv >> /tmp/mylog; else echo FAILED: $drv >> /tmp/mylog; fi; done 2>&1 | tee /tmp/mylog-toplevel
...
marusich@gs1 ~$ grep 'may not be deterministic' /tmp/mylog-toplevel
guix build: error: derivation `/gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv' may not be deterministic: output `/gnu/store/wgb70ir475v4vhg4bcjzv4h2kaa93qj7-glibc-mesboot-2.16.0' differs
guix build: error: derivation `/gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv' may not be deterministic: output `/gnu/store/r1zsxj7wlvw1aa1ifv3nyrrjag44pc9s-xz-mesboot-5.0.0' differs
guix build: error: derivation `/gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv' may not be deterministic: output `/gnu/store/mza1k0mgr8ab407yzavwwz07ly7221wy-binutils-mesboot-2.20.1a' differs
guix build: error: derivation `/gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv' may not be deterministic: output `/gnu/store/x2iy3ka299sk1x97an783jl4pfbn60pj-bootar-1a' differs
guix build: error: derivation `/gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv' may not be deterministic: output `/gnu/store/q7f07gpd9sq9krc68gxa73vbqmk06y0a-gcc-mesboot1-4.6.4' differs
guix build: error: derivation `/gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv' may not be deterministic: output `/gnu/store/ri28kdl41bb76qjr4cyarylw7kxpvfxy-gcc-core-mesboot0-2.95.3' differs
guix build: error: derivation `/gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv' may not be deterministic: output `/gnu/store/56km255bk1s880yn6rxw4wj3crm2pshk-gcc-4.9.4.tar.xz' differs
guix build: error: derivation `/gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv' may not be deterministic: output `/gnu/store/i4p3mp4sghwbjnn6w9dffpswgc31jhm7-gcc-mesboot0-2.95.3' differs
guix build: error: derivation `/gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv' may not be deterministic: output `/gnu/store/01b4w3m6mp55y531kyi1g8shh722kwqm-gcc-7.5.0-lib' differs
guix build: error: derivation `/gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv' may not be deterministic: output `/gnu/store/6h5a5sn3bx3wlkw8140ksxymwlksm6iz-glibc-mesboot0-2.2.5' differs
guix build: error: derivation `/gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv' may not be deterministic: output `/gnu/store/9qrvpjwydmqfjm81frrdcn0n3gpn0bs3-gcc-7.5.0.tar.xz' differs
guix build: error: derivation `/gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv' may not be deterministic: output `/gnu/store/zpqfz6hvg47xml0yrwfy491drfbgg19p-binutils-mesboot1-2.14' differs
guix build: error: derivation `/gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv' may not be deterministic: output `/gnu/store/2601fgjs5h9cpvv5nxrcv52wix29ifrd-binutils-cross-boot0-2.34' differs
guix build: error: derivation `/gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv' may not be deterministic: output `/gnu/store/zsz0mj4jdsz4l511d368hwx2d9wrg4my-gash-utils-boot-0.1.0' differs
guix build: error: derivation `/gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv' may not be deterministic: output `/gnu/store/zz2blvhk3gdqppcwy089p56f57q7zj0q-gcc-mesboot-4.9.4' differs
guix build: error: derivation `/gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv' may not be deterministic: output `/gnu/store/prkqai3zwh3shlqpll6xyncmmqpj49dd-gash-boot-0.2.0' differs
marusich@gs1 ~$ cat /tmp/mylog
FAILED: /gnu/store/07bd5ll0adnyrv1zaz11vz2x1ax447ka-glibc-mesboot-2.16.0.drv
FAILED: /gnu/store/0zkiqxwm6k637xr5s1690nwllnvybvyw-xz-mesboot-5.0.0.drv
FAILED: /gnu/store/2pziz2j7781mhadl8lcfpzm8anvazb37-binutils-mesboot-2.20.1a.drv
FAILED: /gnu/store/4ji6ayrgcyfyxpb583qr5ja4awdlxrdc-bootar-1a.drv
FAILED: /gnu/store/agday74gvxnd6a7191fw2g473b5v66kx-gcc-mesboot1-4.6.4.drv
FAILED: /gnu/store/asnd815v865cvfh2l2dlxmh5y556v3i5-gcc-core-mesboot0-2.95.3.drv
FAILED: /gnu/store/bjhkfxc5axkjl1jv94q0lwym4n6si6f8-gcc-4.9.4.tar.xz.drv
FAILED: /gnu/store/cf3m3ddm8dicrsxba4kjnji5lbyagvbk-gcc-mesboot0-2.95.3.drv
FAILED: /gnu/store/fdmz5blhzfczkpjb9jj6bdbhqlpv3i7l-gcc-7.5.0.drv
FAILED: /gnu/store/fs2r7irjx7ppqks3zhsqmxb8lah1a4v0-glibc-mesboot0-2.2.5.drv
OK: /gnu/store/i5wn3xl6p0zw1vglscgk0bs9dwc6hdh6-gcc-static-5.5.0.drv
FAILED: /gnu/store/imx7vf2qg44yg9i4gsbn5bgpj3crcyr8-gcc-7.5.0.tar.xz.drv
OK: /gnu/store/lhhbpfhk2xm8znvhnbrig8dfgd9xc80k-libstdc++-7.5.0.drv
FAILED: /gnu/store/mrsasf73k1yvdcbn1wyb4ad6dk7ns3vn-binutils-mesboot1-2.14.drv
FAILED: /gnu/store/wxpvfy5g3xjl0kp85cmmy66057p88kln-binutils-cross-boot0-2.34.drv
FAILED: /gnu/store/y4g2gsdxbk2kmp7lih88kdndi7868dnl-gash-utils-boot-0.1.0.drv
FAILED: /gnu/store/yz7h0nf33465a32yjpm9rh6w9959h34q-gcc-mesboot-4.9.4.drv
FAILED: /gnu/store/zf6himkd5rz2ll8ym0c2488bgpnkjkkr-gash-boot-0.2.0.drv
marusich@gs1 ~$ cat /tmp/mylog | grep ^FAILED | wc -l
16
marusich@gs1 ~$ grep 'may not be deterministic' /tmp/mylog-toplevel | wc -l
16
marusich@gs1 ~$
--8<---------------cut here---------------end--------------->8---
Although this does not resovle the cross-system reproducibility issue,
it does seem to narrow down the possibilities.
--
Chris
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]
^ permalink raw reply [flat|nested] 45+ messages in thread
end of thread, other threads:[~2021-02-27 2:40 UTC | newest]
Thread overview: 45+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-06-02 18:59 bug#41669: Cross-compiled powerpc64-linux bootstrap-tarballs not reproducible Chris Marusich
2020-06-03 9:48 ` Chris Marusich
2020-06-03 20:50 ` Vincent Legoll
2020-06-10 6:15 ` Chris Marusich
2020-06-10 22:20 ` Bengt Richter
2020-06-11 21:09 ` Jack Hill
2020-09-13 2:53 ` Chris Marusich
2020-09-13 6:28 ` Efraim Flashner
2020-09-26 6:52 ` Chris Marusich
2020-10-05 12:33 ` Ludovic Courtès
2020-12-13 23:36 ` Chris Marusich
2020-12-14 8:17 ` Efraim Flashner
2020-12-14 8:36 ` Ludovic Courtès
2020-12-14 9:22 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 10:27 ` Efraim Flashner
2020-12-14 10:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 10:38 ` Efraim Flashner
2020-12-14 10:44 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-14 22:24 ` Ludovic Courtès
2020-12-15 7:34 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-15 9:35 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-15 7:46 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-20 7:28 ` Chris Marusich
2020-12-28 2:25 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 4:23 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
2020-12-28 12:39 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 12:55 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 15:31 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 17:40 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 19:01 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-28 20:59 ` Leo Le Bouter via Bug reports for GNU Guix
2020-12-29 7:08 ` Efraim Flashner
2021-01-05 3:54 ` Chris Marusich
2020-12-28 8:07 ` Efraim Flashner
2020-12-30 1:28 ` Leo Le Bouter via Bug reports for GNU Guix
2021-01-04 9:37 ` Ludovic Courtès
2021-01-04 11:16 ` Efraim Flashner
2021-01-05 3:15 ` Chris Marusich
2021-01-06 8:59 ` Ludovic Courtès
2021-01-11 10:31 ` Chris Marusich
2021-01-21 6:26 ` Chris Marusich
2021-01-31 21:35 ` Ludovic Courtès
2020-10-05 12:47 ` Efraim Flashner
2021-02-27 2:39 ` Chris Marusich
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).