* bug#43618: Problem building disk-image with guix from git
@ 2020-09-25 18:11 Fredrik Salomonsson
2020-09-26 1:04 ` Fredrik Salomonsson
2020-10-05 12:28 ` Ludovic Courtès
0 siblings, 2 replies; 6+ messages in thread
From: Fredrik Salomonsson @ 2020-09-25 18:11 UTC (permalink / raw)
To: 43618
Hi guix,
I thought I would test out the patch from https://issues.guix.info/43366
on my laptop. I cloned the guix repo (checksum: d48b17a), applied the
patch from 43366. Then followed the steps in the manual:
```
$ guix environment guix
$ ./bootstrap
$ ./configure --localstatedir=/var
$ make
```
Then launched the daemon in one shell:
```
$ sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
```
And tried to build the disk image in another
```
$ ./pre-inst-env guix system disk-image --file-system-type=iso9660 gnu/system/install.scm
```
But getting this error:
```
substitute: Backtrace:
substitute: In ice-9/boot-9.scm:
substitute: 3223:13 19 (_)
substitute: In ice-9/threads.scm:
substitute: 390:8 18 (_ _)
substitute: In ice-9/boot-9.scm:
substitute: 3507:20 17 (_)
substitute: 2806:4 16 (save-module-excursion _)
substitute: 3527:26 15 (_)
substitute: In unknown file:
substitute: 14 (primitive-load-path "guix/store" #<procedure 7f12fe96f…>)
substitute: In guix/store.scm:
substitute: 23:0 13 (_)
substitute: In ice-9/boot-9.scm:
substitute: 3380:4 12 (define-module* _ #:filename _ #:pure _ #:version _ # _ …)
substitute: 3393:24 11 (_)
substitute: 222:29 10 (map1 (((guix utils)) ((guix config)) ((guix #)) ((…)) …))
substitute: 222:29 9 (map1 (((guix config)) ((guix deprecation)) ((guix …)) …))
substitute: 222:29 8 (map1 (((guix deprecation)) ((guix memoization)) ((…)) …))
substitute: 222:29 7 (map1 (((guix memoization)) ((guix serialization)) (#) …))
substitute: 222:29 6 (map1 (((guix serialization)) ((guix monads)) ((# #)) …))
substitute: 222:29 5 (map1 (((guix monads)) ((guix records)) ((guix #)) (#) …))
substitute: 222:29 4 (map1 (((guix records)) ((guix base16)) ((guix #)) (#) …))
substitute: 222:29 3 (map1 (((guix base16)) ((guix base32)) ((gcrypt #)) # …))
substitute: 222:29 2 (map1 (((guix base32)) ((gcrypt hash)) ((guix #)) (#) …))
substitute: 222:17 1 (map1 (((gcrypt hash)) ((guix profiling)) ((rnrs #)) # …))
substitute: 3300:6 0 (resolve-interface (gcrypt hash) #:select _ #:hide _ # _ …)
substitute:
substitute: ice-9/boot-9.scm:3300:6: In procedure resolve-interface:
substitute: no code for module (gcrypt hash)
guix system: error: `/home/plattfot/projects/guix/scripts/guix substitute' died unexpectedly
```
I tried running the guix system command in a guix enviroment:
```
$ guix environment guix --ad-hoc guile guild-gcrypt
```
Same error.
This is what changed when I applied the patch:
```
$ git diff
diff --git a/guix/build/utils.scm b/guix/build/utils.scm
index 419c10195b..cd43c14eab 100644
--- a/guix/build/utils.scm
+++ b/guix/build/utils.scm
@@ -365,6 +365,16 @@ verbose output to the LOG port."
stat
lstat)))
+(define-syntax-rule (warn-on-error expr file)
+ (catch 'system-error
+ (lambda ()
+ expr)
+ (lambda args
+ (format (current-error-port)
+ "warning: failed to delete ~a: ~a~%"
+ file (strerror
+ (system-error-errno args))))))
+
(define* (delete-file-recursively dir
#:key follow-mounts?)
"Delete DIR recursively, like `rm -rf', without following symlinks. Don't
@@ -375,10 +385,10 @@ errors."
(or follow-mounts?
(= dev (stat:dev stat))))
(lambda (file stat result) ; leaf
- (delete-file file))
+ (warn-on-error (delete-file file) file))
(const #t) ; down
(lambda (dir stat result) ; up
- (rmdir dir))
+ (warn-on-error (rmdir dir) dir))
(const #t) ; skip
(lambda (file stat errno result)
(format (current-error-port)
```
Anyone have any pointers what I might have done wrong?
Thanks
--
s/Fred[re]+i[ck]+/Fredrik/g
^ permalink raw reply related [flat|nested] 6+ messages in thread
* bug#43618: Problem building disk-image with guix from git
2020-09-25 18:11 bug#43618: Problem building disk-image with guix from git Fredrik Salomonsson
@ 2020-09-26 1:04 ` Fredrik Salomonsson
2020-09-26 15:35 ` Andreas Enge
2020-10-05 12:28 ` Ludovic Courtès
1 sibling, 1 reply; 6+ messages in thread
From: Fredrik Salomonsson @ 2020-09-26 1:04 UTC (permalink / raw)
To: 43618
Please close this issue.
Sent it to the wrong mailing list...
Thanks
--
s/Fred[re]+i[ck]+/Fredrik/g
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#43618: Problem building disk-image with guix from git
2020-09-26 1:04 ` Fredrik Salomonsson
@ 2020-09-26 15:35 ` Andreas Enge
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Enge @ 2020-09-26 15:35 UTC (permalink / raw)
To: Fredrik Salomonsson; +Cc: 43618-done
On Fri, Sep 25, 2020 at 06:04:53PM -0700, Fredrik Salomonsson wrote:
> Please close this issue.
> Sent it to the wrong mailing list...
Done, by sending a message to the address in cc.
Andreas
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#43618: Problem building disk-image with guix from git
2020-09-25 18:11 bug#43618: Problem building disk-image with guix from git Fredrik Salomonsson
2020-09-26 1:04 ` Fredrik Salomonsson
@ 2020-10-05 12:28 ` Ludovic Courtès
2020-10-05 17:12 ` Fredrik Salomonsson
1 sibling, 1 reply; 6+ messages in thread
From: Ludovic Courtès @ 2020-10-05 12:28 UTC (permalink / raw)
To: Fredrik Salomonsson; +Cc: 43618
Hi,
Fredrik Salomonsson <plattfot@posteo.net> skribis:
> $ guix environment guix
> $ ./bootstrap
> $ ./configure --localstatedir=/var
> $ make
> ```
>
> Then launched the daemon in one shell:
> ```
> $ sudo -E ./pre-inst-env guix-daemon --build-users-group=guixbuild
> ```
[...]
> substitute: ice-9/boot-9.scm:3300:6: In procedure resolve-interface:
> substitute: no code for module (gcrypt hash)
> guix system: error: `/home/plattfot/projects/guix/scripts/guix substitute' died unexpectedly
This is ‘guix substitute’, invoked by ‘guix-daemon’, telling you that it
can’t find guile-gcrypt on its load path. ‘sudo -E’ should preserve
GUILE_LOAD_PATH from your environment, but was guile-gcrypt in
$GUILE_LOAD_PATH in the first place?
HTH,
Ludo’.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#43618: Problem building disk-image with guix from git
2020-10-05 12:28 ` Ludovic Courtès
@ 2020-10-05 17:12 ` Fredrik Salomonsson
2020-10-06 7:40 ` Andreas Enge
0 siblings, 1 reply; 6+ messages in thread
From: Fredrik Salomonsson @ 2020-10-05 17:12 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 43618
Hi,
Ludovic Courtès <ludo@gnu.org> writes:
> This is ‘guix substitute’, invoked by ‘guix-daemon’, telling you that it
> can’t find guile-gcrypt on its load path. ‘sudo -E’ should preserve
> GUILE_LOAD_PATH from your environment, but was guile-gcrypt in
> $GUILE_LOAD_PATH in the first place?
Ah, I was running the `guix-daemon` outside the `guix environment guix`
thinking `pre-inst-env` would setup the correct environment. It works
fine now when I launched the `guix-daemon` in the correct environment.
Thanks!
--
s/Fred[re]+i[ck]+/Fredrik/g
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#43618: Problem building disk-image with guix from git
2020-10-05 17:12 ` Fredrik Salomonsson
@ 2020-10-06 7:40 ` Andreas Enge
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Enge @ 2020-10-06 7:40 UTC (permalink / raw)
To: Fredrik Salomonsson; +Cc: 43618-done
On Mon, Oct 05, 2020 at 10:12:00AM -0700, Fredrik Salomonsson wrote:
> It works
> fine now when I launched the `guix-daemon` in the correct environment.
Closing the bug then by sending a message to 43618-done@debbugs.gnu.org.
Andreas
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-10-06 7:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-09-25 18:11 bug#43618: Problem building disk-image with guix from git Fredrik Salomonsson
2020-09-26 1:04 ` Fredrik Salomonsson
2020-09-26 15:35 ` Andreas Enge
2020-10-05 12:28 ` Ludovic Courtès
2020-10-05 17:12 ` Fredrik Salomonsson
2020-10-06 7:40 ` Andreas Enge
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).