* bug#22492: create new user guixsd
@ 2016-01-30 2:48 rennes
2016-01-31 16:29 ` Ludovic Courtès
2016-02-01 0:55 ` Leo Famulari
0 siblings, 2 replies; 10+ messages in thread
From: rennes @ 2016-01-30 2:48 UTC (permalink / raw)
To: 22492
Hi,
i run 'guix system reconfigure config.scm --falback', and add new user:
tron.
When i try to login such as tron does not allow login and slim restart.
i check secure and slim.log log files, this message appears in slim.log:
slim: pam_authentication(): User not known to the underlying
authentication module
The solution to fix this issue was: changing the owner:group for the
home user.
cd /home
chown -Rf 30019:users tron
and works.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-01-30 2:48 bug#22492: create new user guixsd rennes
@ 2016-01-31 16:29 ` Ludovic Courtès
2016-02-01 16:59 ` rennes
2016-02-01 0:55 ` Leo Famulari
1 sibling, 1 reply; 10+ messages in thread
From: Ludovic Courtès @ 2016-01-31 16:29 UTC (permalink / raw)
To: rennes; +Cc: 22492
rennes@openmailbox.org skribis:
> i run 'guix system reconfigure config.scm --falback', and add new
> user: tron.
How did you add the new user account? You added it in the
‘operating-system’ declaration and then run ‘guix system reconfigure’,
right?
> When i try to login such as tron does not allow login and slim restart.
>
> i check secure and slim.log log files, this message appears in slim.log:
>
> slim: pam_authentication(): User not known to the underlying
> authentication module
>
> The solution to fix this issue was: changing the owner:group for the
> home user.
Could it be that /home is on a separate partition? There’s a problem
when that is the case: <http://bugs.gnu.org/21108>.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-01-30 2:48 bug#22492: create new user guixsd rennes
2016-01-31 16:29 ` Ludovic Courtès
@ 2016-02-01 0:55 ` Leo Famulari
2016-02-01 17:01 ` rennes
1 sibling, 1 reply; 10+ messages in thread
From: Leo Famulari @ 2016-02-01 0:55 UTC (permalink / raw)
To: rennes; +Cc: 22492
On Sat, Jan 30, 2016 at 03:48:26AM +0100, rennes@openmailbox.org wrote:
> Hi,
>
> i run 'guix system reconfigure config.scm --falback', and add new user:
> tron.
>
> When i try to login such as tron does not allow login and slim restart.
>
> i check secure and slim.log log files, this message appears in slim.log:
>
> slim: pam_authentication(): User not known to the underlying authentication
> module
>
> The solution to fix this issue was: changing the owner:group for the home
> user.
>
> cd /home
> chown -Rf 30019:users tron
If I am reading this correctly, it means that you changed ownership of
all files in /home to the "tron" user. In general that seems like a bad
idea. What about other users?
>
> and works.
>
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-01-31 16:29 ` Ludovic Courtès
@ 2016-02-01 16:59 ` rennes
2016-02-12 20:58 ` Ludovic Courtès
0 siblings, 1 reply; 10+ messages in thread
From: rennes @ 2016-02-01 16:59 UTC (permalink / raw)
To: ludo; +Cc: 22492
Hi ludo,
On 2016-01-31 17:29, ludo@gnu.org wrote:
> rennes@openmailbox.org skribis:
>
>> i run 'guix system reconfigure config.scm --falback', and add new
>> user: tron.
>
> How did you add the new user account? You added it in the
> ‘operating-system’ declaration and then run ‘guix system reconfigure’,
> right?
>
>> When i try to login such as tron does not allow login and slim
>> restart.
>>
>> i check secure and slim.log log files, this message appears in
>> slim.log:
>>
>> slim: pam_authentication(): User not known to the underlying
>> authentication module
>>
>> The solution to fix this issue was: changing the owner:group for the
>> home user.
>
> Could it be that /home is on a separate partition? There’s a problem
> when that is the case: <http://bugs.gnu.org/21108>.
>
> Thanks,
> Ludo’.
i replace bob user with tron in the configuration file, and later i
reconfigure. And i have only root partition.
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-02-01 0:55 ` Leo Famulari
@ 2016-02-01 17:01 ` rennes
0 siblings, 0 replies; 10+ messages in thread
From: rennes @ 2016-02-01 17:01 UTC (permalink / raw)
To: Leo Famulari; +Cc: 22492
Hi,
On 2016-02-01 01:55, Leo Famulari wrote:
> On Sat, Jan 30, 2016 at 03:48:26AM +0100, rennes@openmailbox.org wrote:
>> Hi,
>>
>> i run 'guix system reconfigure config.scm --falback', and add new
>> user:
>> tron.
>>
>> When i try to login such as tron does not allow login and slim
>> restart.
>>
>> i check secure and slim.log log files, this message appears in
>> slim.log:
>>
>> slim: pam_authentication(): User not known to the underlying
>> authentication
>> module
>>
>> The solution to fix this issue was: changing the owner:group for the
>> home
>> user.
>>
>> cd /home
>> chown -Rf 30019:users tron
>
> If I am reading this correctly, it means that you changed ownership of
> all files in /home to the "tron" user. In general that seems like a bad
> idea. What about other users?
>
>>
>> and works.
>>
>>
>>
>>
In the new generations the user are created but do not enter.
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-02-01 16:59 ` rennes
@ 2016-02-12 20:58 ` Ludovic Courtès
2016-02-13 5:48 ` rennes
0 siblings, 1 reply; 10+ messages in thread
From: Ludovic Courtès @ 2016-02-12 20:58 UTC (permalink / raw)
To: rennes; +Cc: 22492
rennes@openmailbox.org skribis:
> On 2016-01-31 17:29, ludo@gnu.org wrote:
>> rennes@openmailbox.org skribis:
>>
>>> i run 'guix system reconfigure config.scm --falback', and add new
>>> user: tron.
>>
>> How did you add the new user account? You added it in the
>> ‘operating-system’ declaration and then run ‘guix system reconfigure’,
>> right?
[...]
> i replace bob user with tron in the configuration file, and later i
> reconfigure. And i have only root partition.
You wrote:
> When i try to login such as tron does not allow login and slim restart.
Can you log in as ‘tron’ on the console? (Try Ctrl-alt-F2 to switch to
the console.)
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-02-12 20:58 ` Ludovic Courtès
@ 2016-02-13 5:48 ` rennes
2016-03-07 12:20 ` Ludovic Courtès
0 siblings, 1 reply; 10+ messages in thread
From: rennes @ 2016-02-13 5:48 UTC (permalink / raw)
To: ludo; +Cc: 22492
On 2016-02-12 14:58, ludo@gnu.org wrote:
> rennes@openmailbox.org skribis:
>
>> On 2016-01-31 17:29, ludo@gnu.org wrote:
>>> rennes@openmailbox.org skribis:
>>>
>>>> i run 'guix system reconfigure config.scm --falback', and add new
>>>> user: tron.
>>>
>>> How did you add the new user account? You added it in the
>>> ‘operating-system’ declaration and then run ‘guix system
>>> reconfigure’,
>>> right?
>
> [...]
>
>> i replace bob user with tron in the configuration file, and later i
>> reconfigure. And i have only root partition.
>
> You wrote:
>
>> When i try to login such as tron does not allow login and slim
>> restart.
>
> Can you log in as ‘tron’ on the console? (Try Ctrl-alt-F2 to switch to
> the console.)
>
> Ludo’.
Hi Ludo,
i installed the system from scratch. I will make a scenario for testing.
Thanks.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-02-13 5:48 ` rennes
@ 2016-03-07 12:20 ` Ludovic Courtès
2016-03-08 14:13 ` rennes
0 siblings, 1 reply; 10+ messages in thread
From: Ludovic Courtès @ 2016-03-07 12:20 UTC (permalink / raw)
To: rennes; +Cc: 22492
rennes@openmailbox.org skribis:
> On 2016-02-12 14:58, ludo@gnu.org wrote:
>> rennes@openmailbox.org skribis:
>>
>>> On 2016-01-31 17:29, ludo@gnu.org wrote:
>>>> rennes@openmailbox.org skribis:
>>>>
>>>>> i run 'guix system reconfigure config.scm --falback', and add new
>>>>> user: tron.
>>>>
>>>> How did you add the new user account? You added it in the
>>>> ‘operating-system’ declaration and then run ‘guix system
>>>> reconfigure’,
>>>> right?
>>
>> [...]
>>
>>> i replace bob user with tron in the configuration file, and later i
>>> reconfigure. And i have only root partition.
>>
>> You wrote:
>>
>>> When i try to login such as tron does not allow login and slim
>>> restart.
>>
>> Can you log in as ‘tron’ on the console? (Try Ctrl-alt-F2 to switch to
>> the console.)
>>
>> Ludo’.
>
> Hi Ludo,
>
> i installed the system from scratch. I will make a scenario for testing.
Hi! Any update on this bug?
http://bugs.gnu.org/22492
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-03-07 12:20 ` Ludovic Courtès
@ 2016-03-08 14:13 ` rennes
2016-03-08 14:51 ` Ludovic Courtès
0 siblings, 1 reply; 10+ messages in thread
From: rennes @ 2016-03-08 14:13 UTC (permalink / raw)
To: ludo; +Cc: 22492
On 2016-03-07 06:20, ludo@gnu.org wrote:
> rennes@openmailbox.org skribis:
>
>> On 2016-02-12 14:58, ludo@gnu.org wrote:
>>> rennes@openmailbox.org skribis:
>>>
>>>> On 2016-01-31 17:29, ludo@gnu.org wrote:
>>>>> rennes@openmailbox.org skribis:
>>>>>
>>>>>> i run 'guix system reconfigure config.scm --falback', and add new
>>>>>> user: tron.
>>>>>
>>>>> How did you add the new user account? You added it in the
>>>>> ‘operating-system’ declaration and then run ‘guix system
>>>>> reconfigure’,
>>>>> right?
>>>
>>> [...]
>>>
>>>> i replace bob user with tron in the configuration file, and later i
>>>> reconfigure. And i have only root partition.
>>>
>>> You wrote:
>>>
>>>> When i try to login such as tron does not allow login and slim
>>>> restart.
>>>
>>> Can you log in as ‘tron’ on the console? (Try Ctrl-alt-F2 to switch
>>> to
>>> the console.)
>>>
>>> Ludo’.
>>
>> Hi Ludo,
>>
>> i installed the system from scratch. I will make a scenario for
>> testing.
>
> Hi! Any update on this bug?
>
> http://bugs.gnu.org/22492
>
> Thanks,
> Ludo’.
I realized the stage and the new user was created correctly.
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#22492: create new user guixsd
2016-03-08 14:13 ` rennes
@ 2016-03-08 14:51 ` Ludovic Courtès
0 siblings, 0 replies; 10+ messages in thread
From: Ludovic Courtès @ 2016-03-08 14:51 UTC (permalink / raw)
To: rennes; +Cc: 22492
rennes@openmailbox.org skribis:
> On 2016-03-07 06:20, ludo@gnu.org wrote:
>> rennes@openmailbox.org skribis:
>>
>>> On 2016-02-12 14:58, ludo@gnu.org wrote:
>>>> rennes@openmailbox.org skribis:
>>>>
>>>>> On 2016-01-31 17:29, ludo@gnu.org wrote:
>>>>>> rennes@openmailbox.org skribis:
>>>>>>
>>>>>>> i run 'guix system reconfigure config.scm --falback', and add new
>>>>>>> user: tron.
>>>>>>
>>>>>> How did you add the new user account? You added it in the
>>>>>> ‘operating-system’ declaration and then run ‘guix system
>>>>>> reconfigure’,
>>>>>> right?
>>>>
>>>> [...]
>>>>
>>>>> i replace bob user with tron in the configuration file, and later i
>>>>> reconfigure. And i have only root partition.
>>>>
>>>> You wrote:
>>>>
>>>>> When i try to login such as tron does not allow login and slim
>>>>> restart.
>>>>
>>>> Can you log in as ‘tron’ on the console? (Try Ctrl-alt-F2 to
>>>> switch to
>>>> the console.)
>>>>
>>>> Ludo’.
>>>
>>> Hi Ludo,
>>>
>>> i installed the system from scratch. I will make a scenario for
>>> testing.
>>
>> Hi! Any update on this bug?
>>
>> http://bugs.gnu.org/22492
>>
>> Thanks,
>> Ludo’.
>
>
> I realized the stage and the new user was created correctly.
OK, closing.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-03-08 14:52 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-30 2:48 bug#22492: create new user guixsd rennes
2016-01-31 16:29 ` Ludovic Courtès
2016-02-01 16:59 ` rennes
2016-02-12 20:58 ` Ludovic Courtès
2016-02-13 5:48 ` rennes
2016-03-07 12:20 ` Ludovic Courtès
2016-03-08 14:13 ` rennes
2016-03-08 14:51 ` Ludovic Courtès
2016-02-01 0:55 ` Leo Famulari
2016-02-01 17:01 ` rennes
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).