* bug#22419: Zsh test failure
@ 2016-01-21 2:28 Leo Famulari
2016-01-21 3:09 ` bug#22419: Sorry for the duplicated email Leo Famulari
0 siblings, 1 reply; 3+ messages in thread
From: Leo Famulari @ 2016-01-21 2:28 UTC (permalink / raw)
To: 22419
Zsh fails to build due to a test failure on my system (x86_64).
The test suite does not report where the failure occurs but I believe it
is in section 'Test/B02typeset.ztst' as a result of patch-shebang
failing to find a binary interpreter for 'Test/ztst.zsh':
patch-shebang: ./Test/ztst.zsh: warning: no binary for interpreter `zsh' found in $PATH
I wonder if this means that the file is being interpreted by Bash, or
maybe the 'sh' mode of Bash.
At the conclusion of the test suite:
**************************************
44 successful test scripts, 1 failure, 0 skipped
**************************************
Makefile:189: recipe for target 'check' failed
make[1]: *** [check] Error 1
make[1]: Leaving directory '/tmp/guix-build-zsh-5.1.1.drv-0/zsh-5.1.1/Test'
Makefile:265: recipe for target 'check' failed
make: *** [check] Error 2
phase `check' failed after 30.2 seconds
Here is the verbose output of the test section B02, up to where section
B03 begins. I created the verbose output by setting the make-flag
"ZTST_verbose=2".
Normally, before a new section begins, the previous section reports its
success. That does not happen in this case:
./B02typeset.ztst: starting.
ZTST_getsect: read section name: prep
ZTST_getchunk: read code chunk:
mkdir typeset.tmp && cd typeset.tmp
ZTST_execchunk: status 0
ZTST_getchunk: read code chunk:
setopt noglob
ZTST_execchunk: status 0
ZTST_getchunk: read code chunk:
scalar=scalar
array=(a r r a y)
ZTST_execchunk: status 0
ZTST_getchunk: read code chunk:
scope00() {
typeset scalar
scalar=local
typeset -a array
array=(l o c a l)
print $scalar $array
}
scope01() {
local scalar
scalar=local
local -a array
array=(l o c a l)
print $scalar $array
}
scope02() {
declare scalar
scalar=local
declare -a array
array=(l o c a l)
print $scalar $array
}
scope10() {
export outer=outer
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope11() {
typeset -x outer=outer
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope12() {
local -x outer=inner
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope13() {
local -xT OUTER outer
outer=(i n n e r)
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $OUTER'
}
ZTST_execchunk: status 0
ZTST_getchunk: read code chunk:
# Bug? `typeset -h' complains that ! # $ * - ? @ are not identifiers.
stress00() {
typeset -h +g -m [[:alpha:]_]*
unset -m [[:alpha:]_]*
typeset +m [[:alpha:]_]*
}
ZTST_execchunk: status 0
ZTST_getchunk: read code chunk:
ZTST_getsect: read section name: test
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset +m scalar array
ZTST_getchunk: read code chunk:
typeset +m scalar array
ZTST_test: examining line:
>scalar
ZTST_getredir: read redir for '>':
scalar
array array
ZTST_test: examining line:
Running test: Report types of parameters with typeset +m
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
scalar
array array
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope00
ZTST_getchunk: read code chunk:
scope00
print $scalar $array
ZTST_test: examining line:
>local l o c a l
ZTST_getredir: read redir for '>':
local l o c a l
scalar a r r a y
ZTST_test: examining line:
Running test: Simple local declarations
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
local l o c a l
scalar a r r a y
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope01
ZTST_getchunk: read code chunk:
scope01
print $scalar $array
ZTST_test: examining line:
>local l o c a l
ZTST_getredir: read redir for '>':
local l o c a l
scalar a r r a y
ZTST_test: examining line:
Running test: Equivalence of local and typeset in functions
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
local l o c a l
scalar a r r a y
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope02
ZTST_getchunk: read code chunk:
scope02
print $scalar $array
ZTST_test: examining line:
>local l o c a l
ZTST_getredir: read redir for '>':
local l o c a l
scalar a r r a y
ZTST_test: examining line:
Running test: Basic equivalence of declare and typeset
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
local l o c a l
scalar a r r a y
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
declare +m scalar
ZTST_getchunk: read code chunk:
declare +m scalar
ZTST_test: examining line:
>scalar
ZTST_getredir: read redir for '>':
scalar
ZTST_test: examining line:
Running test: declare previously lacked -m/+m options
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
scalar
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope10
ZTST_getchunk: read code chunk:
scope10
print $outer
ZTST_test: examining line:
>outer
ZTST_getredir: read redir for '>':
outer
outer
ZTST_test: examining line:
Running test: Global export
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
outer
outer
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope11
ZTST_getchunk: read code chunk:
scope11
print $outer
ZTST_test: examining line:
>outer
ZTST_getredir: read redir for '>':
outer
outer
ZTST_test: examining line:
Running test: Equivalence of export and typeset -x
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
outer
outer
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
scope12
ZTST_getchunk: read code chunk:
scope12
print $outer
ZTST_test: examining line:
>inner
ZTST_getredir: read redir for '>':
inner
outer
ZTST_test: examining line:
Running test: Local export
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
inner
outer
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
float f=3.14159
ZTST_getchunk: read code chunk:
float f=3.14159
typeset +m f
float -E3 f
print $f
float -F f
print $f
ZTST_test: examining line:
>float local f
ZTST_getredir: read redir for '>':
float local f
3.14e+00
3.142
ZTST_test: examining line:
Running test: Floating point, adding a precision, and fixed point
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
float local f
3.14e+00
3.142
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
integer i=3.141
ZTST_getchunk: read code chunk:
integer i=3.141
typeset +m i
integer -i2 i
print $i
ZTST_test: examining line:
>integer local i
ZTST_getredir: read redir for '>':
integer local i
2#11
ZTST_test: examining line:
Running test: Integer and changing the base
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
integer local i
2#11
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
float -E3 f=3.141
ZTST_getchunk: read code chunk:
float -E3 f=3.141
typeset +m f
integer -i2 f
typeset +m f
print $f
ZTST_test: examining line:
>float local f
ZTST_getredir: read redir for '>':
float local f
integer 2 local f
2#11
ZTST_test: examining line:
Running test: Conversion of floating point to integer
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
float local f
integer 2 local f
2#11
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -f
ZTST_getchunk: read code chunk:
typeset -f
ZTST_test: examining line:
>$(functions)
ZTST_getredir: read redir for '>':
$(functions)
ZTST_test: examining line:
Running test: Equivalence of functions and typeset -f
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
ZTST_cleanup () {
cd $ZTST_testdir
rm -rf $ZTST_testdir/dummy.tmp $ZTST_testdir/*.tmp(N) ${TMPPREFIX}.ztst*$$(N)
}
ZTST_diff () {
emulate -L zsh
setopt extendedglob
local diff_out
integer diff_pat diff_ret
case $1 in
(p) diff_pat=1 ;;
(d) ;;
(*) print "Bad ZTST_diff code: d for diff, p for pattern match" ;;
esac
shift
if (( diff_pat ))
then
local -a diff_lines1 diff_lines2
integer failed i
diff_lines1=("${(f)$(<$argv[-2])}")
diff_lines2=("${(f)$(<$argv[-1])}")
if (( ${#diff_lines1} != ${#diff_lines2} ))
then
failed=1
else
for ((i = 1; i <= ${#diff_lines1}; i++ )) do
if [[ ${diff_lines2[i]} != ${~diff_lines1[i]} ]]
then
failed=1
break
fi
done
fi
if (( failed ))
then
print -rl "Pattern match failed:" \<${^diff_lines1} \>${^diff_lines2}
diff_ret=1
fi
else
diff_out=$(diff "$@")
diff_ret="$?"
if [[ "$diff_ret" != "0" ]]
then
print -r "$diff_out"
fi
fi
return "$diff_ret"
}
ZTST_execchunk () {
setopt localloops
options=($ZTST_testopts)
() {
unsetopt localloops
eval "$ZTST_code"
}
ZTST_status=$?
ZTST_testopts=(${(kv)options[*]})
options=(${ZTST_mainopts[*]})
ZTST_verbose 2 "ZTST_execchunk: status $ZTST_status"
return $ZTST_status
}
ZTST_getchunk () {
ZTST_code=''
while [[ $ZTST_curline = [[:blank:]]# ]]
do
ZTST_getline || break
done
while [[ $ZTST_curline = [[:blank:]]##[^[:blank:]]* ]]
do
ZTST_code="${ZTST_code:+${ZTST_code}
}${ZTST_curline}"
ZTST_getline || break
done
ZTST_verbose 2 "ZTST_getchunk: read code chunk:
$ZTST_code"
[[ -n $ZTST_code ]]
}
ZTST_getline () {
local IFS=
while true
do
read -u $ZTST_input -r ZTST_curline || return 1
[[ $ZTST_curline = \#* ]] || return 0
done
}
ZTST_getredir () {
local char=${ZTST_curline[1]} fn
ZTST_redir=${ZTST_curline[2,-1]}
while ZTST_getline
do
[[ $ZTST_curline[1] = $char ]] || break
ZTST_redir="${ZTST_redir}
${ZTST_curline[2,-1]}"
done
ZTST_verbose 2 "ZTST_getredir: read redir for '$char':
$ZTST_redir"
case $char in
('<') fn=$ZTST_in ;;
('>') fn=$ZTST_out ;;
('?') fn=$ZTST_err ;;
(*) ZTST_testfailed "bad redir operator: $char"
return 1 ;;
esac
if [[ $ZTST_flags = *q* && $char = '<' ]]
then
print -r -- "${(e)ZTST_redir}" >> $fn
else
print -r -- "$ZTST_redir" >> $fn
fi
return 0
}
ZTST_getsect () {
local match mbegin mend
while [[ $ZTST_curline != '%'(#b)([[:alnum:]]##)* ]]
do
ZTST_getline || return 1
[[ $ZTST_curline = [[:blank:]]# ]] && continue
if [[ $# -eq 0 && $ZTST_curline != '%'[[:alnum:]]##* ]]
then
ZTST_testfailed "bad line found before or after section:
$ZTST_curline"
exit 1
fi
done
ZTST_getline
ZTST_cursect=${match[1]}
ZTST_verbose 2 "ZTST_getsect: read section name: $ZTST_cursect"
return 0
}
ZTST_hashmark () {
if [[ ZTST_verbose -le 0 && -t $ZTST_fd ]]
then
print -n -u$ZTST_fd -- ${(pl:SECONDS::\#::\#\r:)}
fi
(( SECONDS > COLUMNS+1 && (SECONDS -= COLUMNS) ))
}
ZTST_prepclean () {
while ZTST_getchunk
do
ZTST_execchunk > /dev/null || [[ -n $1 ]] || {
[[ -n "$ZTST_unimplemented" ]] || ZTST_testfailed "non-zero status from preparation code:
$ZTST_code" && return 0
}
done
}
ZTST_test () {
local last match mbegin mend found substlines
local diff_out diff_err
local ZTST_skip
while true
do
rm -f $ZTST_in $ZTST_out $ZTST_err
touch $ZTST_in $ZTST_out $ZTST_err
ZTST_message=''
ZTST_failmsg=''
found=0
diff_out=d
diff_err=d
ZTST_verbose 2 "ZTST_test: looking for new test"
while true
do
ZTST_verbose 2 "ZTST_test: examining line:
$ZTST_curline"
case $ZTST_curline in
(%*) if [[ $found = 0 ]]
then
break 2
else
last=1
break
fi ;;
([[:space:]]#) if [[ $found = 0 ]]
then
ZTST_getline || break 2
continue
else
break
fi ;;
([[:space:]]##[^[:space:]]*) ZTST_getchunk
if [[ $ZTST_curline = (#b)([-0-9]##)([[:alpha:]]#)(:*)# ]]
then
ZTST_xstatus=$match[1]
ZTST_flags=$match[2]
ZTST_message=${match[3]:+${match[3][2,-1]}}
else
ZTST_testfailed "expecting test status at:
$ZTST_curline"
return 1
fi
ZTST_getline
found=1 ;;
('<'*) ZTST_getredir || return 1
found=1 ;;
('*>'*) ZTST_curline=${ZTST_curline[2,-1]}
diff_out=p ;&
('>'*) ZTST_getredir || return 1
found=1 ;;
('*?'*) ZTST_curline=${ZTST_curline[2,-1]}
diff_err=p ;&
('?'*) ZTST_getredir || return 1
found=1 ;;
('F:'*) ZTST_failmsg="${ZTST_failmsg:+${ZTST_failmsg}
} ${ZTST_curline[3,-1]}"
ZTST_getline
found=1 ;;
(*) ZTST_testfailed "bad line in test block:
$ZTST_curline"
return 1 ;;
esac
done
if [[ -n $ZTST_code ]]
then
ZTST_hashmark
ZTST_verbose 1 "Running test: $ZTST_message"
ZTST_verbose 2 "ZTST_test: expecting status: $ZTST_xstatus"
ZTST_verbose 2 "Input: $ZTST_in, output: $ZTST_out, error: $ZTST_terr"
ZTST_execchunk < $ZTST_in > $ZTST_tout 2> $ZTST_terr
if [[ -n $ZTST_skip ]]
then
ZTST_verbose 0 "Test case skipped: $ZTST_skip"
ZTST_skip=
if [[ -n $last ]]
then
break
else
continue
fi
fi
if [[ $ZTST_xstatus != - && $ZTST_xstatus != $ZTST_status ]]
then
ZTST_testfailed "bad status $ZTST_status, expected $ZTST_xstatus from:
$ZTST_code${$(<$ZTST_terr):+
Error output:
$(<$ZTST_terr)}"
return 1
fi
ZTST_verbose 2 "ZTST_test: test produced standard output:
$(<$ZTST_tout)
ZTST_test: and standard error:
$(<$ZTST_terr)"
if [[ $ZTST_flags = *q* && -s $ZTST_out ]]
then
substlines="$(<$ZTST_out)"
rm -rf $ZTST_out
print -r -- "${(e)substlines}" > $ZTST_out
fi
if [[ $ZTST_flags != *d* ]] && ! ZTST_diff $diff_out -c $ZTST_out $ZTST_tout
then
ZTST_testfailed "output differs from expected as shown above for:
$ZTST_code${$(<$ZTST_terr):+
Error output:
$(<$ZTST_terr)}"
return 1
fi
if [[ $ZTST_flags = *q* && -s $ZTST_err ]]
then
substlines="$(<$ZTST_err)"
rm -rf $ZTST_err
print -r -- "${(e)substlines}" > $ZTST_err
fi
if [[ $ZTST_flags != *D* ]] && ! ZTST_diff $diff_err -c $ZTST_err $ZTST_terr
then
ZTST_testfailed "error output differs from expected as shown above for:
$ZTST_code"
return 1
fi
fi
ZTST_verbose 1 "Test successful."
[[ -n $last ]] && break
done
ZTST_verbose 2 "ZTST_test: all tests successful"
ZTST_message=''
}
ZTST_testfailed () {
print -r "Test $ZTST_testname failed: $1"
if [[ -n $ZTST_message ]]
then
print -r "Was testing: $ZTST_message"
fi
print -r "$ZTST_testname: test failed."
if [[ -n $ZTST_failmsg ]]
then
print -r "The following may (or may not) help identifying the cause:
$ZTST_failmsg"
fi
ZTST_testfailed=1
return 1
}
ZTST_verbose () {
local lev=$1
shift
if [[ -n $ZTST_verbose && $ZTST_verbose -ge $lev ]]
then
print -r -u $ZTST_fd -- $*
fi
}
scope00 () {
typeset scalar
scalar=local
typeset -a array
array=(l o c a l)
print $scalar $array
}
scope01 () {
local scalar
scalar=local
local -a array
array=(l o c a l)
print $scalar $array
}
scope02 () {
declare scalar
scalar=local
declare -a array
array=(l o c a l)
print $scalar $array
}
scope10 () {
export outer=outer
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope11 () {
typeset -x outer=outer
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope12 () {
local -x outer=inner
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $outer'
}
scope13 () {
local -xT OUTER outer
outer=(i n n e r)
/gnu/store/311nvir0pz1mhf0mgsmfrw00qfj7yq0j-bash-4.3.39/bin/sh -fc 'echo $OUTER'
}
stress00 () {
typeset -h +g -m [[:alpha:]_]*
unset -m [[:alpha:]_]*
typeset +m [[:alpha:]_]*
}
tail () {
emulate -L zsh
if [[ -z $TAIL_SUPPORTS_MINUS_N ]]
then
local test
test=$(echo "foo\nbar" | command tail -n 1 2>/dev/null)
if [[ $test = bar ]]
then
TAIL_SUPPORTS_MINUS_N=1
else
TAIL_SUPPORTS_MINUS_N=0
fi
fi
integer argi=${argv[(i)-<->]}
if [[ $argi -le $# && $TAIL_SUPPORTS_MINUS_N = 1 ]]
then
argv[$argi]=(-n ${argv[$argi][2,-1]})
fi
command tail "$argv[@]"
}
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
readonly r=success
ZTST_getchunk: read code chunk:
readonly r=success
print $r
r=failure
ZTST_test: examining line:
>success
ZTST_getredir: read redir for '>':
success
ZTST_test: examining line:
?(eval):3: read-only variable: r
ZTST_getredir: read redir for '?':
(eval):3: read-only variable: r
ZTST_test: examining line:
Running test: Readonly declaration
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
success
ZTST_test: and standard error:
(eval):3: read-only variable: r
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset r=success
ZTST_getchunk: read code chunk:
typeset r=success
readonly r
print $r
r=failure
ZTST_test: examining line:
>success
ZTST_getredir: read redir for '>':
success
ZTST_test: examining line:
?(eval):4: read-only variable: r
ZTST_getredir: read redir for '?':
(eval):4: read-only variable: r
ZTST_test: examining line:
Running test: Convert to readonly
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
success
ZTST_test: and standard error:
(eval):4: read-only variable: r
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -gU array
ZTST_getchunk: read code chunk:
typeset -gU array
print $array
ZTST_test: examining line:
>a r y
ZTST_getredir: read redir for '>':
a r y
ZTST_test: examining line:
Running test: Uniquified arrays and non-local scope
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
a r y
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -T SCALAR=l:o:c:a:l array
ZTST_getchunk: read code chunk:
typeset -T SCALAR=l:o:c:a:l array
print $array
typeset -U SCALAR
print $SCALAR $array
ZTST_test: examining line:
>l o c a l
ZTST_getredir: read redir for '>':
l o c a l
l:o:c:a l o c a
ZTST_test: examining line:
Running test: Tied parameters and uniquified colon-arrays
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
l o c a l
l:o:c:a l o c a
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
(setopt NO_multibyte cbases
ZTST_getchunk: read code chunk:
(setopt NO_multibyte cbases
LC_ALL=C 2>/dev/null
typeset -T SCALAR=$'l\x83o\x83c\x83a\x83l' array $'\x83'
print $array
typeset -U SCALAR
for (( i = 1; i <= ${#SCALAR}; i++ )); do
char=$SCALAR[i]
print $(( [#16] #char ))
done
print $array)
ZTST_test: examining line:
>l o c a l
ZTST_getredir: read redir for '>':
l o c a l
0x6C
0x83
0x6F
0x83
0x63
0x83
0x61
l o c a
ZTST_test: examining line:
Running test: Tied parameters and uniquified arrays with meta-character as separator
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
l o c a l
0x6C
0x83
0x6F
0x83
0x63
0x83
0x61
l o c a
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -T SCALAR=$'l\000o\000c\000a\000l' array $'\000'
ZTST_getchunk: read code chunk:
typeset -T SCALAR=$'l\000o\000c\000a\000l' array $'\000'
typeset -U SCALAR
print $array
[[ $SCALAR == $'l\000o\000c\000a' ]]
ZTST_test: examining line:
>l o c a
ZTST_getredir: read redir for '>':
l o c a
ZTST_test: examining line:
Running test: Tied parameters and uniquified arrays with NUL-character as separator
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
l o c a
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -T SCALAR array
ZTST_getchunk: read code chunk:
typeset -T SCALAR array
typeset +T SCALAR
ZTST_test: examining line:
?(eval):typeset:2: use unset to remove tied variables
ZTST_getredir: read redir for '?':
(eval):typeset:2: use unset to remove tied variables
ZTST_test: examining line:
Running test: Untying is prohibited
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
ZTST_test: and standard error:
(eval):typeset:2: use unset to remove tied variables
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
OUTER=outer
ZTST_getchunk: read code chunk:
OUTER=outer
scope13
print $OUTER
ZTST_test: examining line:
>i:n:n:e:r
ZTST_getredir: read redir for '>':
i:n:n:e:r
outer
ZTST_test: examining line:
Running test: Export of tied parameters
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
i:n:n:e:r
outer
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -TU MORESTUFF=here-we-go-go-again morestuff '-'
ZTST_getchunk: read code chunk:
typeset -TU MORESTUFF=here-we-go-go-again morestuff '-'
print -l $morestuff
ZTST_test: examining line:
>here
ZTST_getredir: read redir for '>':
here
we
go
again
ZTST_test: examining line:
Running test: Tied arrays with separator specified
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
here
we
go
again
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -T THIS will not work
ZTST_getchunk: read code chunk:
typeset -T THIS will not work
ZTST_test: examining line:
?(eval):typeset:1: too many arguments for -T
ZTST_getredir: read redir for '?':
(eval):typeset:1: too many arguments for -T
ZTST_test: examining line:
Running test: Tied array syntax
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
ZTST_test: and standard error:
(eval):typeset:1: too many arguments for -T
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local array[2]=x
ZTST_getchunk: read code chunk:
local array[2]=x
ZTST_test: examining line:
?(eval):local:1: array[2]: can't create local array elements
ZTST_getredir: read redir for '?':
(eval):local:1: array[2]: can't create local array elements
ZTST_test: examining line:
Running test: Illegal local array element assignment
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
ZTST_test: and standard error:
(eval):local:1: array[2]: can't create local array elements
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local -a array
ZTST_getchunk: read code chunk:
local -a array
typeset array[1]=a array[2]=b array[3]=c
print $array
ZTST_test: examining line:
>a b c
ZTST_getredir: read redir for '>':
a b c
ZTST_test: examining line:
Running test: Legal local array element assignment
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
a b c
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local -A assoc
ZTST_getchunk: read code chunk:
local -A assoc
local b=1 ;: to stomp assoc[1] if assoc[b] is broken
typeset assoc[1]=a assoc[b]=2 assoc[3]=c
print $assoc[1] $assoc[b] $assoc[3]
ZTST_test: examining line:
>a 2 c
ZTST_getredir: read redir for '>':
a 2 c
ZTST_test: examining line:
Running test: Legal local associative array element assignment
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
a 2 c
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local scalar scalar[1]=a scalar[2]=b scalar[3]=c
ZTST_getchunk: read code chunk:
local scalar scalar[1]=a scalar[2]=b scalar[3]=c
print $scalar
ZTST_test: examining line:
>abc
ZTST_getredir: read redir for '>':
abc
ZTST_test: examining line:
Running test: Local scalar subscript assignment
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
abc
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -L 10 fools
ZTST_getchunk: read code chunk:
typeset -L 10 fools
for fools in " once" "twice" " thrice" " oops too long here"; do
print "'$fools'"
done
ZTST_test: examining line:
>'once '
ZTST_getredir: read redir for '>':
'once '
'twice '
'thrice '
'oops too l'
ZTST_test: examining line:
Running test: Left justification of scalars
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'once '
'twice '
'thrice '
'oops too l'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -L 10 -F 3 foolf
ZTST_getchunk: read code chunk:
typeset -L 10 -F 3 foolf
for foolf in 1.3 4.6 -2.987 -4.91031; do
print "'$foolf'"
done
ZTST_test: examining line:
>'1.300 '
ZTST_getredir: read redir for '>':
'1.300 '
'4.600 '
'-2.987 '
'-4.910 '
ZTST_test: examining line:
Running test: Left justification of floating point
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'1.300 '
'4.600 '
'-2.987 '
'-4.910 '
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -L 10 -Z foolzs
ZTST_getchunk: read code chunk:
typeset -L 10 -Z foolzs
for foolzs in 001.3 04.6 -2.987 -04.91231; do
print "'$foolzs'"
done
ZTST_test: examining line:
>'1.3 '
ZTST_getredir: read redir for '>':
'1.3 '
'4.6 '
'-2.987 '
'-04.91231 '
ZTST_test: examining line:
Running test: Left justification of scalars with zero suppression
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'1.3 '
'4.6 '
'-2.987 '
'-04.91231 '
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -R 10 foors
ZTST_getchunk: read code chunk:
typeset -R 10 foors
for foors in short longer even-longer; do
print "'$foors'"
done
ZTST_test: examining line:
>' short'
ZTST_getredir: read redir for '>':
' short'
' longer'
'ven-longer'
ZTST_test: examining line:
Running test: Right justification of scalars
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
' short'
' longer'
'ven-longer'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -Z 10 foozs
ZTST_getchunk: read code chunk:
typeset -Z 10 foozs
for foozs in 42 -42 " 43" " -43"; do
print "'$foozs'"
done
ZTST_test: examining line:
>'0000000042'
ZTST_getredir: read redir for '>':
'0000000042'
' -42'
' 000000043'
' -43'
ZTST_test: examining line:
Running test: Right justification of scalars with zeroes
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'0000000042'
' -42'
' 000000043'
' -43'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
integer -Z 10 foozi
ZTST_getchunk: read code chunk:
integer -Z 10 foozi
for foozi in 42 -42 " 43" " -43"; do
print "'$foozi'"
done
ZTST_test: examining line:
>'0000000042'
ZTST_getredir: read redir for '>':
'0000000042'
'-000000042'
'0000000043'
'-000000043'
ZTST_test: examining line:
Running test: Right justification of integers with zero, no initial base
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'0000000042'
'-000000042'
'0000000043'
'-000000043'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
unsetopt cbases
ZTST_getchunk: read code chunk:
unsetopt cbases
integer -Z 10 -i 16 foozi16
for foozi16 in 42 -42 " 43" " -43"; do
print "'$foozi16'"
done
ZTST_test: examining line:
>'16#000002A'
ZTST_getredir: read redir for '>':
'16#000002A'
'-16#00002A'
'16#000002B'
'-16#00002B'
ZTST_test: examining line:
Running test: Right justification of integers with zero, base 16, C_BASES off
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'16#000002A'
'-16#00002A'
'16#000002B'
'-16#00002B'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
setopt cbases
ZTST_getchunk: read code chunk:
setopt cbases
integer -Z 10 -i 16 foozi16c
for foozi16c in 42 -42 " 43" " -43"; do
print "'$foozi16c'"
done
ZTST_test: examining line:
>'0x0000002A'
ZTST_getredir: read redir for '>':
'0x0000002A'
'-0x000002A'
'0x0000002B'
'-0x000002B'
ZTST_test: examining line:
Running test: Right justification of integers with zero, base 16, C_BASES on
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'0x0000002A'
'-0x000002A'
'0x0000002B'
'-0x000002B'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
setopt cbases
ZTST_getchunk: read code chunk:
setopt cbases
integer -Z 10 -i 16 foozi16c
for foozi16c in 0x1234 -0x1234; do
for (( i = 1; i <= 5; i++ )); do
print "'${foozi16c[i,11-i]}'"
done
print "'${foozi16c[-2]}'"
done
ZTST_test: examining line:
>'0x00001234'
ZTST_getredir: read redir for '>':
'0x00001234'
'x0000123'
'000012'
'0001'
'00'
'3'
'-0x0001234'
'0x000123'
'x00012'
'0001'
'00'
'3'
ZTST_test: examining line:
Running test: Extracting substrings from padded integers
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'0x00001234'
'x0000123'
'000012'
'0001'
'00'
'3'
'-0x0001234'
'0x000123'
'x00012'
'0001'
'00'
'3'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -F 3 -Z 10 foozf
ZTST_getchunk: read code chunk:
typeset -F 3 -Z 10 foozf
for foozf in 3.14159 -3.14159 4 -4; do
print "'$foozf'"
done
ZTST_test: examining line:
>'000003.142'
ZTST_getredir: read redir for '>':
'000003.142'
'-00003.142'
'000004.000'
'-00004.000'
ZTST_test: examining line:
Running test: Right justification of fixed point numbers with zero
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
'000003.142'
'-00003.142'
'000004.000'
'-00004.000'
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
stress00
ZTST_getchunk: read code chunk:
stress00
print $scalar $array
ZTST_test: examining line:
>scalar a r y
ZTST_getredir: read redir for '>':
scalar a r y
ZTST_test: examining line:
Running test: Stress test: all parameters are local and unset, using -m
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
scalar a r y
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local parentenv=preserved
ZTST_getchunk: read code chunk:
local parentenv=preserved
fn() {
typeset -h +g -m \*
unset -m \*
integer i=9
float -H f=9
declare -t scalar
declare -H -a array
typeset
typeset +
}
fn
echo $parentenv
ZTST_test: examining line:
>array local array
ZTST_getredir: read redir for '>':
array local array
float local f
integer local i=9
local tagged scalar=''
array local array
float local f
integer local i
local tagged scalar
preserved
ZTST_test: examining line:
Running test: Parameter hiding and tagging, printing types and values
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
array local array
float local f
integer local i=9
local tagged scalar=''
array local array
float local f
integer local i
local tagged scalar
preserved
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
export ENVFOO=bar
ZTST_getchunk: read code chunk:
export ENVFOO=bar
print ENVFOO in environment
env | grep '^ENVFOO'
print Changing ENVFOO
ENVFOO="not bar any more"
env | grep '^ENVFOO'
unset ENVFOO
print ENVFOO no longer in environment
env | grep '^ENVFOO'
ZTST_test: examining line:
>ENVFOO in environment
ZTST_getredir: read redir for '>':
ENVFOO in environment
ENVFOO=bar
Changing ENVFOO
ENVFOO=not bar any more
ENVFOO no longer in environment
ZTST_test: examining line:
Running test: Adding and removing values to and from the environment
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
ENVFOO in environment
ENVFOO=bar
Changing ENVFOO
ENVFOO=not bar any more
ENVFOO no longer in environment
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
(export FOOENV=BAR
ZTST_getchunk: read code chunk:
(export FOOENV=BAR
env | grep '^FOOENV'
print Exec
exec $ZTST_testdir/../Src/zsh -fc '
print Unset
unset FOOENV
env | grep "^FOOENV"')
ZTST_test: examining line:
>FOOENV=BAR
ZTST_getredir: read redir for '>':
FOOENV=BAR
Exec
Unset
ZTST_test: examining line:
Running test: Can unset environment variables after exec
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
FOOENV=BAR
Exec
Unset
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local case1=upper
ZTST_getchunk: read code chunk:
local case1=upper
typeset -u case1
print $case1
upper="VALUE OF \$UPPER"
print ${(P)case1}
ZTST_test: examining line:
>UPPER
ZTST_getredir: read redir for '>':
UPPER
VALUE OF $UPPER
ZTST_test: examining line:
Running test: Upper case conversion, does not apply to values used internally
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
UPPER
VALUE OF $UPPER
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local case2=LOWER
ZTST_getchunk: read code chunk:
local case2=LOWER
typeset -l case2
print $case2
LOWER="value of \$lower"
print ${(P)case2}
ZTST_test: examining line:
>lower
ZTST_getredir: read redir for '>':
lower
value of $lower
ZTST_test: examining line:
Running test: Lower case conversion, does not apply to values used internally
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
lower
value of $lower
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -a array
ZTST_getchunk: read code chunk:
typeset -a array
array=(foo bar)
fn() { typeset -p array nonexistent; }
fn
ZTST_test: examining line:
>typeset -a array
ZTST_getredir: read redir for '>':
typeset -a array
array=( foo bar )
ZTST_test: examining line:
?fn:typeset: no such variable: nonexistent
ZTST_getredir: read redir for '?':
fn:typeset: no such variable: nonexistent
ZTST_test: examining line:
Running test: declare -p shouldn't create scoped values
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
typeset -a array
array=( foo bar )
ZTST_test: and standard error:
fn:typeset: no such variable: nonexistent
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
unsetopt typesetsilent
ZTST_getchunk: read code chunk:
unsetopt typesetsilent
silent1(){ typeset -g silence; }
silent2(){ local silence; silent1; }
silent2
ZTST_test: examining line:
Running test: typeset -g should be silent even without TYPESET_SILENT
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
typeset -T TIED_SCALAR tied_array
ZTST_getchunk: read code chunk:
typeset -T TIED_SCALAR tied_array
TIED_SCALAR=foo:bar
print $tied_array
typeset -T TIED_SCALAR=goo:car tied_array
print $tied_array
typeset -T TIED_SCALAR tied_array=(poo par)
print $TIED_SCALAR
ZTST_test: examining line:
>foo bar
ZTST_getredir: read redir for '>':
foo bar
goo car
poo:par
ZTST_test: examining line:
Running test: retying arrays to same array works
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
foo bar
goo car
poo:par
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
(
ZTST_getchunk: read code chunk:
(
setopt POSIXBUILTINS
readonly pbro
print ${+pbro} >&2
(typeset pbro=3)
(pbro=4)
readonly -p | grep pbro >&2 # shows up as "readonly" although unset
typeset -r pbro # idempotent (no error)...
print ${+pbro} >&2 # ...so still readonly...
typeset +r pbro # ...can't turn it off
)
ZTST_test: examining line:
?0
ZTST_getredir: read redir for '?':
0
(eval):5: read-only variable: pbro
(eval):6: read-only variable: pbro
typeset -r pbro
0
(eval):10: read-only variable: pbro
ZTST_test: examining line:
Running test: readonly with POSIX_BUILTINS
ZTST_test: expecting status: 1
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 1
ZTST_test: test produced standard output:
ZTST_test: and standard error:
0
(eval):5: read-only variable: pbro
(eval):6: read-only variable: pbro
typeset -r pbro
0
(eval):10: read-only variable: pbro
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
readonly foo=bar novalue
ZTST_getchunk: read code chunk:
readonly foo=bar novalue
readonly -p
ZTST_test: examining line:
>typeset -r foo=bar
ZTST_getredir: read redir for '>':
typeset -r foo=bar
typeset -r novalue=''
ZTST_test: examining line:
Running test: readonly -p output (no readonly specials)
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
typeset -r foo=bar
typeset -r novalue=''
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
local -a a1 a2
ZTST_getchunk: read code chunk:
local -a a1 a2
local -r r1=yes r2=no
a1=(one two) a2=(three four)
readonly a1
typeset -pm 'a[12]'
typeset -pm 'r[12]'
ZTST_test: examining line:
>typeset -a a1
ZTST_getredir: read redir for '>':
typeset -a a1
a1=( one two )
typeset -ar a1
typeset -a a2
a2=( three four )
typeset -r r1=yes
typeset -r r2=no
ZTST_test: examining line:
Running test: readonly -p output
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
typeset -a a1
a1=( one two )
typeset -ar a1
typeset -a a2
a2=( three four )
typeset -r r1=yes
typeset -r r2=no
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
one=hidden two=hidden three=hidden four=hidden five=hidden
ZTST_getchunk: read code chunk:
one=hidden two=hidden three=hidden four=hidden five=hidden
fn() {
local bleugh="four=vier"
typeset -R10 one=eins two=(zwei dio) three $bleugh five=(cinq cinque)
three=drei
print -l $one $two $three $four $five
}
fn
print -l $one $two $three $four $five
ZTST_test: examining line:
> eins
ZTST_getredir: read redir for '>':
eins
zwei
dio
drei
vier
cinq
cinque
hidden
hidden
hidden
hidden
hidden
ZTST_test: examining line:
Running test: typeset reserved word interface: basic
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
eins
zwei
dio
drei
vier
cinq
cinque
hidden
hidden
hidden
hidden
hidden
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
(
ZTST_getchunk: read code chunk:
(
setopt glob
mkdir -p arrayglob
touch arrayglob/{one,two,three,four,five,six,seven}
fn() {
typeset array=(arrayglob/[tf]*)
print -l ${array:t}
#
typeset {first,second,third}=the_same_value array=(
extends
over
multiple
lines
)
print -l $first $second $third "$array"
#
integer i=$(echo 1 + 2 + 3 + 4)
print $i
#
# only noted by accident this was broken..
# we need to turn off special recognition
# of assignments within assignments...
typeset careful=( i=1 j=2 k=3 )
print -l $careful
}
fn
)
ZTST_test: examining line:
>five
ZTST_getredir: read redir for '>':
five
four
three
two
the_same_value
the_same_value
the_same_value
extends over multiple lines
10
i=1
j=2
k=3
ZTST_test: examining line:
Running test: typeset reserved word, more complicated cases
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
five
four
three
two
the_same_value
the_same_value
the_same_value
extends over multiple lines
10
i=1
j=2
k=3
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
(
ZTST_getchunk: read code chunk:
(
# reserved word is recognised at parsing.
# yes, this is documented.
# anyway, that means we need to
# re-eval the function...
fn='
fn() {
typeset foo=`echo one word=two`
print $foo
print $word
}
'
print reserved
eval $fn; fn
print builtin
disable -r typeset
eval $fn; fn
enable -r typeset
disable typeset
print reserved
eval $fn; fn
)
ZTST_test: examining line:
>reserved
ZTST_getredir: read redir for '>':
reserved
one word=two
builtin
one
two
reserved
one word=two
ZTST_test: examining line:
Running test: reserved word and builtin interfaces
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
reserved
one word=two
builtin
one
two
reserved
one word=two
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
fn() {
ZTST_getchunk: read code chunk:
fn() {
emulate -L zsh
setopt typeset_silent
local k
typeset -A hash=(k1 v1 k2 v2)
typeset foo=word array=(more than one word)
for k in ${(ko)hash}; do
print $k $hash[$k]
done
print -l $foo $array
typeset -A hash
typeset foo array
for k in ${(ko)hash}; do
print $k $hash[$k]
done
print -l $foo $array
typeset hash=(k3 v3 k4 v4) array=(odd number here)
for k in ${(ko)hash}; do
print $k $hash[$k]
done
print -l $array
}
fn
ZTST_test: examining line:
>k1 v1
ZTST_getredir: read redir for '>':
k1 v1
k2 v2
word
more
than
one
word
k1 v1
k2 v2
word
more
than
one
word
k3 v3
k4 v4
odd
number
here
ZTST_test: examining line:
Running test: typeset preserves existing variable types
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
k1 v1
k2 v2
word
more
than
one
word
k1 v1
k2 v2
word
more
than
one
word
k3 v3
k4 v4
odd
number
here
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
fn() { typeset foo bar thing=this stuff=(that other) more=woevva; }
ZTST_getchunk: read code chunk:
fn() { typeset foo bar thing=this stuff=(that other) more=woevva; }
which -x2 fn
fn2() { typeset assignfirst=(why not); }
which -x2 fn2
ZTST_test: examining line:
>fn () {
ZTST_getredir: read redir for '>':
fn () {
typeset foo bar thing=this stuff=(that other) more=woevva
}
fn2 () {
typeset assignfirst=(why not)
}
ZTST_test: examining line:
Running test: text output from typeset
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
fn () {
typeset foo bar thing=this stuff=(that other) more=woevva
}
fn2 () {
typeset assignfirst=(why not)
}
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
fn() {
ZTST_getchunk: read code chunk:
fn() {
typeset array=()
print ${(t)array} ${#array}
typeset gnothergarray=() gnothergarray[1]=yes gnothergarray[2]=no
print -l ${(t)gnothergarray} $gnothergarray
}
fn
ZTST_test: examining line:
>array-local 0
ZTST_getredir: read redir for '>':
array-local 0
array-local
yes
no
ZTST_test: examining line:
Running test: can set empty array
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
array-local 0
array-local
yes
no
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
array=(nothing to see here)
ZTST_getchunk: read code chunk:
array=(nothing to see here)
fn() {
typeset array=(one two three four five)
typeset array[2,4]=(umm er)
print ${#array} $array
typeset array[2,3]=()
print ${#array} $array
}
fn
print ${#array} $array
ZTST_test: examining line:
>4 one umm er five
ZTST_getredir: read redir for '>':
4 one umm er five
2 one five
4 nothing to see here
ZTST_test: examining line:
Running test: can update array slices in typeset
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
4 one umm er five
2 one five
4 nothing to see here
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: examining line:
array=(no really nothing here)
ZTST_getchunk: read code chunk:
array=(no really nothing here)
fn() {
typeset array=() array[2]=two array[4]=four
typeset -p array
typeset array=() array[3]=three array[1]=one
typeset -p array
}
fn
print $array
ZTST_test: examining line:
>typeset -a array
ZTST_getredir: read redir for '>':
typeset -a array
array=( '' two '' four )
typeset -a array
array=( one '' three )
no really nothing here
ZTST_test: examining line:
Running test: setting empty array in typeset
ZTST_test: expecting status: 0
Input: /tmp/zsh.ztst.in.18963, output: /tmp/zsh.ztst.out.18963, error: /tmp/zsh.ztst.terr.18963
ZTST_execchunk: status 0
ZTST_test: test produced standard output:
typeset -a array
array=( '' two '' four )
typeset -a array
array=( one '' three )
no really nothing here
ZTST_test: and standard error:
Test successful.
ZTST_test: looking for new test
ZTST_test: examining line:
ZTST_test: all tests successful
./ztst.zsh:540: parse error near `*'
./B03print.ztst: starting.
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#22419: Sorry for the duplicated email
2016-01-21 2:28 bug#22419: Zsh test failure Leo Famulari
@ 2016-01-21 3:09 ` Leo Famulari
2016-01-21 8:45 ` Ludovic Courtès
0 siblings, 1 reply; 3+ messages in thread
From: Leo Famulari @ 2016-01-21 3:09 UTC (permalink / raw)
To: 22419-done
Closing this duplicate
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#22419: Sorry for the duplicated email
2016-01-21 3:09 ` bug#22419: Sorry for the duplicated email Leo Famulari
@ 2016-01-21 8:45 ` Ludovic Courtès
0 siblings, 0 replies; 3+ messages in thread
From: Ludovic Courtès @ 2016-01-21 8:45 UTC (permalink / raw)
To: 22419
Note that it’s also possible to merge bugs:
http://debbugs.gnu.org/Developer.html
(Particularly easy from the Emacs debbugs interface.)
Ludo’.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-01-21 8:46 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-21 2:28 bug#22419: Zsh test failure Leo Famulari
2016-01-21 3:09 ` bug#22419: Sorry for the duplicated email Leo Famulari
2016-01-21 8:45 ` Ludovic Courtès
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).