From: ludo@gnu.org (Ludovic Courtès)
To: Eli Zaretskii <eliz@gnu.org>
Cc: guile-user@gnu.org
Subject: Re: guile 2.0.9 build on mingw
Date: Wed, 19 Jun 2013 21:38:31 +0200 [thread overview]
Message-ID: <87r4fxc2mg.fsf@gnu.org> (raw)
In-Reply-To: <83txkuozzr.fsf@gnu.org> (Eli Zaretskii's message of "Wed, 19 Jun 2013 18:56:56 +0300")
Eli Zaretskii <eliz@gnu.org> skribis:
>> From: ludo@gnu.org (Ludovic Courtès)
[...]
>> There’s a gdbinit file in Guile that you can load to get a few helper
>> functions.
>
> At first I wanted to say I was blind not seeing it, but then I
> realized that this file is not in the tarball, only in the
> repository. So I never found it before.
>
> May I suggest to make it part of the release tarball?
Will do.
> Also, as none of the commands defined on gdbinit are documented in any
> shape or form, could you perhaps say a few words about the purpose and
> the intended usage of each one of them?
Keep in mind
> E.g., when to use 'pp' and when to use 'gdisplay' or 'gwrite' or
> 'sputs'?
It’s like the Scheme procedures pretty-print, display, write, and
scm_puts.
> And what are 'pslot' and 'gslot' good for?
Ah ah, good question. I guess they print/access a struct slot.
Thanks,
Ludo’.
next prev parent reply other threads:[~2013-06-19 19:38 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-20 19:46 guile 2.0.9 build on mingw Panicz Maciej Godek
2013-05-20 20:05 ` Eli Zaretskii
2013-05-20 20:46 ` Andy Wingo
2013-05-20 21:09 ` objc
2013-05-21 2:43 ` Eli Zaretskii
2013-05-22 15:26 ` Eli Zaretskii
2013-06-07 8:37 ` Eli Zaretskii
2013-06-07 12:44 ` Ludovic Courtès
2013-06-07 14:59 ` Eli Zaretskii
2013-06-09 17:10 ` Eli Zaretskii
2013-06-09 20:33 ` Ludovic Courtès
2013-06-09 21:16 ` Andy Wingo
2013-06-09 21:35 ` Ludovic Courtès
2013-06-10 16:18 ` Eli Zaretskii
2013-06-10 16:18 ` Eli Zaretskii
2013-06-10 16:23 ` Eli Zaretskii
2013-06-10 19:09 ` Mark H Weaver
2013-06-10 19:49 ` Eli Zaretskii
2013-06-10 20:54 ` Mark H Weaver
2013-06-11 16:53 ` Eli Zaretskii
2013-06-11 22:11 ` Ludovic Courtès
2013-06-12 17:46 ` Eli Zaretskii
2013-06-18 21:51 ` Why launch the Guile signal delivery thread on exit? (was Re: guile 2.0.9 build on mingw) Mark H Weaver
2013-06-19 15:51 ` Eli Zaretskii
2013-06-19 16:06 ` Julian Graham
2013-06-19 19:20 ` Ludovic Courtès
2013-06-12 17:57 ` guile 2.0.9 build on mingw Eli Zaretskii
2013-06-13 13:26 ` Eli Zaretskii
2013-06-16 14:19 ` Ludovic Courtès
2013-06-13 13:33 ` Eli Zaretskii
2013-06-16 14:36 ` Ludovic Courtès
2013-06-16 15:40 ` Eli Zaretskii
2013-06-16 14:55 ` Ludovic Courtès
2013-06-16 15:47 ` Eli Zaretskii
2013-06-16 18:59 ` Ludovic Courtès
2013-06-13 13:40 ` Eli Zaretskii
2013-06-16 14:59 ` Ludovic Courtès
2013-06-17 15:41 ` Eli Zaretskii
2013-06-18 20:45 ` Ludovic Courtès
2013-06-18 22:28 ` Mark H Weaver
2013-06-19 3:03 ` Eli Zaretskii
2013-06-19 19:26 ` Ludovic Courtès
2013-06-19 20:02 ` Eli Zaretskii
2013-06-19 2:59 ` Eli Zaretskii
2013-06-19 15:56 ` Eli Zaretskii
2013-06-19 19:38 ` Ludovic Courtès [this message]
2013-06-13 13:41 ` Eli Zaretskii
2013-06-16 15:04 ` Ludovic Courtès
2013-06-16 15:48 ` Eli Zaretskii
2013-06-16 14:44 ` Ludovic Courtès
2013-06-16 15:41 ` Eli Zaretskii
2013-06-12 17:59 ` Eli Zaretskii
2013-06-16 14:46 ` Ludovic Courtès
2013-06-12 18:02 ` Eli Zaretskii
2013-06-16 19:50 ` Ludovic Courtès
2013-06-16 20:22 ` Eli Zaretskii
2013-06-17 15:45 ` Mark H Weaver
2013-06-18 17:17 ` Eli Zaretskii
2013-06-18 19:31 ` Eli Zaretskii
2013-06-18 20:19 ` Ludovic Courtès
2013-06-19 2:53 ` Eli Zaretskii
2013-06-19 19:28 ` Ludovic Courtès
2013-06-19 19:56 ` Eli Zaretskii
2013-05-26 20:41 ` Panicz Maciej Godek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.gnu.org/software/guile/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r4fxc2mg.fsf@gnu.org \
--to=ludo@gnu.org \
--cc=eliz@gnu.org \
--cc=guile-user@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).