* Broken Mail Transport Agent at stelco.com.mv
[not found] <DMfxdQFKh000004e1@bdc.stelco.local>
@ 2011-04-09 22:06 ` Mark H Weaver
2011-04-09 22:09 ` Mark H Weaver
0 siblings, 1 reply; 6+ messages in thread
From: Mark H Weaver @ 2011-04-09 22:06 UTC (permalink / raw)
To: postmaster; +Cc: guile-devel
To the administrator of stelco.com.mv's mail system:
Your mail transport agent (MTA), aka mail server, is broken.
Can you please tell us what software you use?
Specifically, your MTA apparently sends delivery status notifications
(DSNs) to the address listed in the "From:" header. This is very wrong.
It is very bad for mailing lists in particular, because it causes your
DSNs to be sent to the original poster instead of to the mailing list
system itself.
MTAs should ideally send DSNs to the envelope sender, i.e. the address
specified in the "MAIL" SMTP command. If this is too difficult to
implement, you should at least use the address specified in the
"Errors-To:" header, or if that isn't present, the "Sender:" header.
In any case, please respond to let us know that you received this.
Thanks,
Mark
postmaster@stelco.com.mv writes:
> This is an automatically generated Delivery Status Notification.
>
> Delivery to the following recipients failed.
>
> shiyaz@stelco.com.mv
>
>
>
> Reporting-MTA: dns;bdc.stelco.local
> Received-From-MTA: dns;stelco.com.mv
> Arrival-Date: Sat, 9 Apr 2011 10:06:32 +0500
>
> Final-Recipient: rfc822;shiyaz@stelco.com.mv
> Action: failed
> Status: 5.2.1
> X-Display-Name: Shiyas Rasheed
>
> From: Mark H Weaver <mhw@netris.org>
> Subject: after-gc-hook recently broken for bdwgc 7.2alpha CVS
> To: guile-devel@gnu.org
> Date: Sat, 09 Apr 2011 01:05:25 -0400
>
> Sometime between 2.0.0 and current stable-2.0, after-gc-hook has been
> broken on my system: "FAIL: gc.test: gc: after-gc-hook gets called".
>
> Both 2.0.0 and current stable-2.0 are built and linked with bdwgc
> 7.2alpha from CVS, circa 2011-03-27. This on gNewSense metad/mipsel
> (slightly modified Debian Lenny).
>
> Any ideas?
>
> Best,
> Mark
>
> ----------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Broken Mail Transport Agent at stelco.com.mv
2011-04-09 22:06 ` Broken Mail Transport Agent at stelco.com.mv Mark H Weaver
@ 2011-04-09 22:09 ` Mark H Weaver
2011-04-11 23:05 ` Andy Wingo
2011-04-21 11:48 ` Andy Wingo
0 siblings, 2 replies; 6+ messages in thread
From: Mark H Weaver @ 2011-04-09 22:09 UTC (permalink / raw)
To: guile-devel
postmaster@stelco.com.mv writes:
> This is an automatically generated Delivery Status Notification.
>
> Delivery to the following recipients failed.
>
> shiyaz@stelco.com.mv
Can one of the guile-devel administrators please disable delivery to the
address above, as would presumably have been done automatically if these
bounces were being sent to the right address?
For some time now, everyone who posts to guile-devel receives a bounce
from the MTA at stelco.com.mv.
Thanks,
Mark
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Broken Mail Transport Agent at stelco.com.mv
2011-04-09 22:09 ` Mark H Weaver
@ 2011-04-11 23:05 ` Andy Wingo
2011-04-12 9:55 ` Ludovic Courtès
2011-04-21 11:48 ` Andy Wingo
1 sibling, 1 reply; 6+ messages in thread
From: Andy Wingo @ 2011-04-11 23:05 UTC (permalink / raw)
To: Mark H Weaver; +Cc: Ludovic Courtès, guile-devel
On Sun 10 Apr 2011 00:09, Mark H Weaver <mhw@netris.org> writes:
> postmaster@stelco.com.mv writes:
>> This is an automatically generated Delivery Status Notification.
>>
>> Delivery to the following recipients failed.
>>
>> shiyaz@stelco.com.mv
>
> Can one of the guile-devel administrators please disable delivery to the
> address above, as would presumably have been done automatically if these
> bounces were being sent to the right address?
I don't seem to have admin access to this list. Ludo do you have
access?
Just to ask, before bothering the sysadmins...
Andy
--
http://wingolog.org/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Broken Mail Transport Agent at stelco.com.mv
2011-04-11 23:05 ` Andy Wingo
@ 2011-04-12 9:55 ` Ludovic Courtès
2011-04-12 23:04 ` Neil Jerram
0 siblings, 1 reply; 6+ messages in thread
From: Ludovic Courtès @ 2011-04-12 9:55 UTC (permalink / raw)
To: Andy Wingo; +Cc: Mark H Weaver, guile-devel
Hey!
Andy Wingo <wingo@pobox.com> writes:
> On Sun 10 Apr 2011 00:09, Mark H Weaver <mhw@netris.org> writes:
>
>> postmaster@stelco.com.mv writes:
>>> This is an automatically generated Delivery Status Notification.
>>>
>>> Delivery to the following recipients failed.
>>>
>>> shiyaz@stelco.com.mv
>>
>> Can one of the guile-devel administrators please disable delivery to the
>> address above, as would presumably have been done automatically if these
>> bounces were being sent to the right address?
>
> I don't seem to have admin access to this list. Ludo do you have
> access?
I tried to log in at <http://lists.gnu.org/mailman/admin/guile-devel>
with the latest password we received and it didn’t work.
I never administered the lists, I think Neil used to.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Broken Mail Transport Agent at stelco.com.mv
2011-04-12 9:55 ` Ludovic Courtès
@ 2011-04-12 23:04 ` Neil Jerram
0 siblings, 0 replies; 6+ messages in thread
From: Neil Jerram @ 2011-04-12 23:04 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: Andy Wingo, Mark H Weaver, guile-devel
Hi guys....
On 12 April 2011 10:55, Ludovic Courtès <ludo@gnu.org> wrote:
> Hey!
>
> Andy Wingo <wingo@pobox.com> writes:
>
>> On Sun 10 Apr 2011 00:09, Mark H Weaver <mhw@netris.org> writes:
>>
>>> postmaster@stelco.com.mv writes:
>>>> This is an automatically generated Delivery Status Notification.
>>>>
>>>> Delivery to the following recipients failed.
>>>>
>>>> shiyaz@stelco.com.mv
>>>
>>> Can one of the guile-devel administrators please disable delivery to the
>>> address above, as would presumably have been done automatically if these
>>> bounces were being sent to the right address?
>>
>> I don't seem to have admin access to this list. Ludo do you have
>> access?
>
> I tried to log in at <http://lists.gnu.org/mailman/admin/guile-devel>
> with the latest password we received and it didn’t work.
>
> I never administered the lists, I think Neil used to.
Yes, it's correct that I did do that for a while. But then the whole
job was passed to a group of mailing list administrators at GNU - as
suggested by the "listhelper-moderateDELETEME at gnu.org" address at
the bottom of, e.g.,
http://lists.gnu.org/mailman/listinfo/guile-devel.
So, I think that's the address to contact, if you want to help
administer the lists, or if you have particular requests.
Regards,
Neil
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Broken Mail Transport Agent at stelco.com.mv
2011-04-09 22:09 ` Mark H Weaver
2011-04-11 23:05 ` Andy Wingo
@ 2011-04-21 11:48 ` Andy Wingo
1 sibling, 0 replies; 6+ messages in thread
From: Andy Wingo @ 2011-04-21 11:48 UTC (permalink / raw)
To: Mark H Weaver; +Cc: shiyaz, guile-devel
On Sun 10 Apr 2011 00:09, Mark H Weaver <mhw@netris.org> writes:
> postmaster@stelco.com.mv writes:
>> This is an automatically generated Delivery Status Notification.
>>
>> Delivery to the following recipients failed.
>>
>> shiyaz@stelco.com.mv
>
> Can one of the guile-devel administrators please disable delivery to the
> address above, as would presumably have been done automatically if these
> bounces were being sent to the right address?
I have now done this; sorry for the delay, there were some issues with
the admin password for the list.
Andy
--
http://wingolog.org/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-04-21 11:48 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <DMfxdQFKh000004e1@bdc.stelco.local>
2011-04-09 22:06 ` Broken Mail Transport Agent at stelco.com.mv Mark H Weaver
2011-04-09 22:09 ` Mark H Weaver
2011-04-11 23:05 ` Andy Wingo
2011-04-12 9:55 ` Ludovic Courtès
2011-04-12 23:04 ` Neil Jerram
2011-04-21 11:48 ` Andy Wingo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).