* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
@ 2014-02-25 19:06 Sam Steingold
2014-02-25 21:08 ` Juanma Barranquero
0 siblings, 1 reply; 21+ messages in thread
From: Sam Steingold @ 2014-02-25 19:06 UTC (permalink / raw)
To: 16884
In GNU Emacs 24.3.50.6 (x86_64-apple-darwin13.1.0, NS apple-appkit-1265.19)
of 2014-02-25 on sds-MacBook-Pro.local
Windowing system distributor `Apple', version 10.3.1265
Configured using:
`configure --with-ns'
when restarting emacs I just got this:
Debugger entered--Lisp error: (file-error "Reading directory" "no such file or directory" "/Users/sds/.emacs.d/auto-saves/*")
access-file("/Users/sds/.emacs.d/auto-saves/*" "Reading directory")
insert-directory("/Users/sds/.emacs.d/auto-saves/*" "-als" t nil)
dired-insert-directory("/Users/sds/.emacs.d/auto-saves/*" "-als" nil t t)
dired-readin-insert()
dired-readin()
dired-internal-noselect("/Users/sds/.emacs.d/auto-saves/*" nil)
dired-noselect("/Users/sds/.emacs.d/auto-saves/*" nil)
dired("/Users/sds/.emacs.d/auto-saves/*")
dired-restore-desktop-buffer(nil "*" ("/Users/sds/.emacs.d/auto-saves/*"))
#[0 "\v\f\236A\206\b\305\300\301\302#\207" [nil "*" ("/Users/sds/.emacs.d/auto-saves/*") desktop-buffer-major-mode desktop-buffer-mode-handlers desktop-restore-file-buffer] 4 "\n\n(fn)"]()
funcall(#[0 "\v\f\236A\206\b\305\300\301\302#\207" [nil "*" ("/Users/sds/.emacs.d/auto-saves/*") desktop-buffer-major-mode desktop-buffer-mode-handlers desktop-restore-file-buffer] 4 "\n\n(fn)"])
desktop-create-buffer(206 nil "*" dired-mode (rcirc-track-minor-mode) 288 (nil nil) t ("/Users/sds/.emacs.d/auto-saves/*") nil)
eval-buffer(#<buffer *load*> nil "/Users/sds/.emacs.d/.emacs.desktop" nil t) ; Reading at buffer position 8688
load-with-code-conversion("/Users/sds/.emacs.d/.emacs.desktop" "/Users/sds/.emacs.d/.emacs.desktop" t t)
load("/Users/sds/.emacs.d/.emacs.desktop" t t t)
desktop-read()
#[0 "\303\211\b\235\203
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-25 19:06 bug#16884: 24.3.50; desktop-read should not die on non-existing directories Sam Steingold
@ 2014-02-25 21:08 ` Juanma Barranquero
2014-02-26 17:28 ` Glenn Morris
0 siblings, 1 reply; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-25 21:08 UTC (permalink / raw)
To: Sam Steingold; +Cc: 16884
On Tue, Feb 25, 2014 at 8:06 PM, Sam Steingold <sds@gnu.org> wrote:
> when restarting emacs I just got this:
>
> Debugger entered--Lisp error: (file-error "Reading directory" "no such file or directory" "/Users/sds/.emacs.d/auto-saves/*")
> access-file("/Users/sds/.emacs.d/auto-saves/*" "Reading directory")
> because I did M-x recover-session RET in the previous incarnation.
> I think this error should be caught and either ignored or reported as a message.
On Windows I don't see that. If the directory does not exist (either
the auto-saves one or any other directory in a Dired buffer), desktop
just outputs its usual summary line saying that N buffers were
restored, M buffers failed to restore.
Can you reproduce it at will?
J
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-25 21:08 ` Juanma Barranquero
@ 2014-02-26 17:28 ` Glenn Morris
2014-02-26 17:35 ` Glenn Morris
2014-02-26 17:40 ` Juanma Barranquero
0 siblings, 2 replies; 21+ messages in thread
From: Glenn Morris @ 2014-02-26 17:28 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: Sam Steingold, 16884
Note the unusual use of "*" in the backtrace.
The problem is not "non-existing directory" as it says in the subject,
but failure to match a glob pattern.
mkdir /tmp/foo
touch /tmp/foo/1
emacs -Q
M-x dired /tmp/foo/* ; why not just /tmp/foo ... ?
M-x desktop-save RET /tmp RET
M-x kill-emacs
rm /tmp/foo/1 ; not rm -rf /tmp/foo
emacs -Q
M-: (desktop-read "/tmp")
-> Debugger entered--Lisp error: (file-error "Reading directory"
"no such file or directory" "/tmp/foo/*")
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 17:28 ` Glenn Morris
@ 2014-02-26 17:35 ` Glenn Morris
2014-02-26 17:47 ` Juanma Barranquero
2014-02-26 17:40 ` Juanma Barranquero
1 sibling, 1 reply; 21+ messages in thread
From: Glenn Morris @ 2014-02-26 17:35 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: Sam Steingold, 16884
PS maybe just stick a with-demoted-errors in dired-restore-desktop-buffer.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 17:35 ` Glenn Morris
@ 2014-02-26 17:47 ` Juanma Barranquero
2014-02-26 18:15 ` Sam Steingold
2014-02-26 18:20 ` Eli Zaretskii
0 siblings, 2 replies; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 17:47 UTC (permalink / raw)
To: Glenn Morris; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 6:35 PM, Glenn Morris <rgm@gnu.org> wrote:
> PS maybe just stick a with-demoted-errors in dired-restore-desktop-buffer.
I don't think it is in fact related to desktop. If I call
(dired-restore-desktop-buffer nil "*" '("C:/Windows/temp/foo/*"))
it doesn't fail. The problem seems to be that (dired
"/some/path/with/empty/dir/*") is failing for you (y'all, I mean ;-),
while it works on Windows. Can you try this without desktop.el?
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 17:47 ` Juanma Barranquero
@ 2014-02-26 18:15 ` Sam Steingold
2014-02-26 18:18 ` Juanma Barranquero
2014-02-26 18:20 ` Eli Zaretskii
1 sibling, 1 reply; 21+ messages in thread
From: Sam Steingold @ 2014-02-26 18:15 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16884
I set debug-on-error to t in .emacs, this might be causing the problem.
however, I think this kind of error reporting should be controlled by
--debug-init and not debug-on-error
On Wed, Feb 26, 2014 at 12:47 PM, Juanma Barranquero <lekktu@gmail.com> wrote:
> On Wed, Feb 26, 2014 at 6:35 PM, Glenn Morris <rgm@gnu.org> wrote:
>
>> PS maybe just stick a with-demoted-errors in dired-restore-desktop-buffer.
>
> I don't think it is in fact related to desktop. If I call
>
> (dired-restore-desktop-buffer nil "*" '("C:/Windows/temp/foo/*"))
>
> it doesn't fail. The problem seems to be that (dired
> "/some/path/with/empty/dir/*") is failing for you (y'all, I mean ;-),
> while it works on Windows. Can you try this without desktop.el?
--
Sam Steingold <http://sds.podval.org> <http://www.childpsy.net/>
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:15 ` Sam Steingold
@ 2014-02-26 18:18 ` Juanma Barranquero
2014-02-26 18:36 ` Glenn Morris
2014-02-26 18:38 ` Sam Steingold
0 siblings, 2 replies; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 18:18 UTC (permalink / raw)
To: Sam Steingold; +Cc: 16884
On Wed, Feb 26, 2014 at 7:15 PM, Sam Steingold <sds@gnu.org> wrote:
> I set debug-on-error to t in .emacs, this might be causing the problem.
Not unless there's an error in the first place.
If you run
M-: (dired "/Users/sds/.emacs.d/auto-saves/*") <RET>
(assuming that the auto-saves directory is empty), do you get an error?
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:18 ` Juanma Barranquero
@ 2014-02-26 18:36 ` Glenn Morris
2014-02-26 18:49 ` Juanma Barranquero
2014-02-26 18:38 ` Sam Steingold
1 sibling, 1 reply; 21+ messages in thread
From: Glenn Morris @ 2014-02-26 18:36 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: Sam Steingold, 16884
Juanma Barranquero wrote:
> If you run
>
> M-: (dired "/Users/sds/.emacs.d/auto-saves/*") <RET>
>
> (assuming that the auto-saves directory is empty), do you get an error?
Yes. In just the same way as
M-: (dired "/blargh") RET
throws an error.
This is all fine in normal use.
But dired-restore-desktop-buffer should trap the "glob match fails" case
in just the same way as it traps the "no such directory" case.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:36 ` Glenn Morris
@ 2014-02-26 18:49 ` Juanma Barranquero
2014-02-26 19:22 ` Glenn Morris
0 siblings, 1 reply; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 18:49 UTC (permalink / raw)
To: Glenn Morris; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 7:36 PM, Glenn Morris <rgm@gnu.org> wrote:
> Yes. In just the same way as
>
> M-: (dired "/blargh") RET
>
> throws an error.
>
> This is all fine in normal use.
Well, I find it curious that dired of an empty directory or a failing
pattern match should throw an error (as I said, it doesn't on Windows
when using ls-lisp.el), but if that's the usual and time-honored
behavior, who am I to discuss it?
> But dired-restore-desktop-buffer should trap the "glob match fails" case
> in just the same way as it traps the "no such directory" case.
Yes, if (dired "/nonexistent") errors out, we should catch it when
restoring desktop.el. And it shouldn't ever be a with-demoted-errors,
failing to restore buffers in desktop.el is quite silent, just a
message at the end "X frames, Y buffers restored, Z failed to
restore."
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:49 ` Juanma Barranquero
@ 2014-02-26 19:22 ` Glenn Morris
2014-02-26 20:31 ` Juanma Barranquero
0 siblings, 1 reply; 21+ messages in thread
From: Glenn Morris @ 2014-02-26 19:22 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: Sam Steingold, 16884
Juanma Barranquero wrote:
>> But dired-restore-desktop-buffer should trap the "glob match fails" case
>> in just the same way as it traps the "no such directory" case.
>
> Yes, if (dired "/nonexistent") errors out, we should catch it when
> restoring desktop.el. And it shouldn't ever be a with-demoted-errors,
> failing to restore buffers in desktop.el is quite silent, just a
> message at the end "X frames, Y buffers restored, Z failed to
> restore."
If you've got time to implement this nicety, go for it.
I just went with with-demoted-errors, with is consistent with the
existing "no such directory" case.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 19:22 ` Glenn Morris
@ 2014-02-26 20:31 ` Juanma Barranquero
0 siblings, 0 replies; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 20:31 UTC (permalink / raw)
To: Glenn Morris; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 8:22 PM, Glenn Morris <rgm@gnu.org> wrote:
> I just went with with-demoted-errors, with is consistent with the
> existing "no such directory" case.
I'm OK with that. We can change it afterwards if anyone complains.
Thanks.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:18 ` Juanma Barranquero
2014-02-26 18:36 ` Glenn Morris
@ 2014-02-26 18:38 ` Sam Steingold
1 sibling, 0 replies; 21+ messages in thread
From: Sam Steingold @ 2014-02-26 18:38 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: 16884
> * Juanma Barranquero <yrxxgh@tznvy.pbz> [2014-02-26 19:18:33 +0100]:
>
> On Wed, Feb 26, 2014 at 7:15 PM, Sam Steingold <sds@gnu.org> wrote:
>
>> I set debug-on-error to t in .emacs, this might be causing the problem.
>
> Not unless there's an error in the first place.
>
> If you run
>
> M-: (dired "/Users/sds/.emacs.d/auto-saves/*") <RET>
>
> (assuming that the auto-saves directory is empty), do you get an error?
auto-saves is not empty ATM, but auto-save-list is:
(dired "/Users/sds/.emacs.d/auto-save-list/*")
Debugger entered--Lisp error: (file-error "Reading directory" "no such file or directory" "/Users/sds/.emacs.d/auto-save-list/*")
access-file("/Users/sds/.emacs.d/auto-save-list/*" "Reading directory")
insert-directory("/Users/sds/.emacs.d/auto-save-list/*" "-als" t nil)
dired-insert-directory("/Users/sds/.emacs.d/auto-save-list/*" "-als" nil t t)
dired-readin-insert()
dired-readin()
dired-internal-noselect("/Users/sds/.emacs.d/auto-save-list/*" nil)
dired-noselect("/Users/sds/.emacs.d/auto-save-list/*" nil)
dired("/Users/sds/.emacs.d/auto-save-list/*")
eval((dired "/Users/sds/.emacs.d/auto-save-list/*") nil)
eval-last-sexp-1(t)
eval-last-sexp(t)
eval-print-last-sexp(nil)
call-interactively(eval-print-last-sexp nil nil)
command-execute(eval-print-last-sexp)
--
Sam Steingold (http://sds.podval.org/) on darwin Ns 10.3.1265
http://www.childpsy.net/ http://pmw.org.il http://truepeace.org
http://memri.org http://camera.org http://islamexposedonline.com
Three can keep a secret if two of them are dead.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 17:47 ` Juanma Barranquero
2014-02-26 18:15 ` Sam Steingold
@ 2014-02-26 18:20 ` Eli Zaretskii
2014-02-26 18:28 ` Juanma Barranquero
1 sibling, 1 reply; 21+ messages in thread
From: Eli Zaretskii @ 2014-02-26 18:20 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: sds, 16884
> From: Juanma Barranquero <lekktu@gmail.com>
> Date: Wed, 26 Feb 2014 18:47:18 +0100
> Cc: Sam Steingold <sds@gnu.org>, 16884@debbugs.gnu.org
>
> On Wed, Feb 26, 2014 at 6:35 PM, Glenn Morris <rgm@gnu.org> wrote:
>
> > PS maybe just stick a with-demoted-errors in dired-restore-desktop-buffer.
>
> I don't think it is in fact related to desktop. If I call
>
> (dired-restore-desktop-buffer nil "*" '("C:/Windows/temp/foo/*"))
>
> it doesn't fail. The problem seems to be that (dired
> "/some/path/with/empty/dir/*") is failing for you (y'all, I mean ;-),
> while it works on Windows. Can you try this without desktop.el?
Dired on Windows uses ls-lisp.el, not a real ls program.
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:20 ` Eli Zaretskii
@ 2014-02-26 18:28 ` Juanma Barranquero
2014-02-26 18:34 ` Eli Zaretskii
0 siblings, 1 reply; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 18:28 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 7:20 PM, Eli Zaretskii <eliz@gnu.org> wrote:
> Dired on Windows uses ls-lisp.el, not a real ls program.
Yep, you're right. But dired is documented to accept wildcards:
Dired displays a list of files in dirname (which may also have
shell wildcards appended to select certain files).
so, in any platform, I wouldn't expect it to throw an error if the
wildcard matches no file.
However, if I set
(setq insert-directory-program "c:/bin/gnu/bin/ls.exe"
ls-lisp-use-insert-directory-program t)
then (dired "C:/windows/temp/foo/*") does indeed throw an error.
Is that the expected behavior? It seems like a bug to me (just not in
desktop.el, but dired.el).
^ permalink raw reply [flat|nested] 21+ messages in thread* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:28 ` Juanma Barranquero
@ 2014-02-26 18:34 ` Eli Zaretskii
2014-02-26 18:36 ` Juanma Barranquero
0 siblings, 1 reply; 21+ messages in thread
From: Eli Zaretskii @ 2014-02-26 18:34 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: sds, 16884
> From: Juanma Barranquero <lekktu@gmail.com>
> Date: Wed, 26 Feb 2014 19:28:51 +0100
> Cc: Glenn Morris <rgm@gnu.org>, Sam Steingold <sds@gnu.org>, 16884@debbugs.gnu.org
>
> Dired displays a list of files in dirname (which may also have
> shell wildcards appended to select certain files).
>
> so, in any platform, I wouldn't expect it to throw an error if the
> wildcard matches no file.
Why do you expect an error to be thrown?
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:34 ` Eli Zaretskii
@ 2014-02-26 18:36 ` Juanma Barranquero
2014-02-26 19:04 ` Eli Zaretskii
0 siblings, 1 reply; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 18:36 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 7:34 PM, Eli Zaretskii <eliz@gnu.org> wrote:
> Why do you expect an error to be thrown?
I don't expect it. I get it, when using the ls executable, and that's
also what Sam and Glenn are reporting.
Am I missing something?
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 18:36 ` Juanma Barranquero
@ 2014-02-26 19:04 ` Eli Zaretskii
2014-02-26 19:09 ` Glenn Morris
0 siblings, 1 reply; 21+ messages in thread
From: Eli Zaretskii @ 2014-02-26 19:04 UTC (permalink / raw)
To: Juanma Barranquero; +Cc: sds, 16884
> From: Juanma Barranquero <lekktu@gmail.com>
> Date: Wed, 26 Feb 2014 19:36:05 +0100
> Cc: Glenn Morris <rgm@gnu.org>, Sam Steingold <sds@gnu.org>, 16884@debbugs.gnu.org
>
> On Wed, Feb 26, 2014 at 7:34 PM, Eli Zaretskii <eliz@gnu.org> wrote:
>
> > Why do you expect an error to be thrown?
>
> I don't expect it. I get it, when using the ls executable, and that's
> also what Sam and Glenn are reporting.
AFAIK, what happens when a wildcard matches nothing is implementation
defined.
What exactly depends on an error being thrown in this case?
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 19:04 ` Eli Zaretskii
@ 2014-02-26 19:09 ` Glenn Morris
2014-02-26 19:13 ` Eli Zaretskii
0 siblings, 1 reply; 21+ messages in thread
From: Glenn Morris @ 2014-02-26 19:09 UTC (permalink / raw)
To: Eli Zaretskii; +Cc: Juanma Barranquero, sds, 16884
Eli Zaretskii wrote:
> AFAIK, what happens when a wildcard matches nothing is implementation
> defined.
ls FILE-THAT-DOES-NOT-EXIST
returns non-zero.
ls knows nothing of wildcards, that's the shell's business.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 19:09 ` Glenn Morris
@ 2014-02-26 19:13 ` Eli Zaretskii
2014-02-26 19:20 ` Glenn Morris
0 siblings, 1 reply; 21+ messages in thread
From: Eli Zaretskii @ 2014-02-26 19:13 UTC (permalink / raw)
To: Glenn Morris; +Cc: lekktu, sds, 16884
> From: Glenn Morris <rgm@gnu.org>
> Cc: Juanma Barranquero <lekktu@gmail.com>, sds@gnu.org, 16884@debbugs.gnu.org
> Date: Wed, 26 Feb 2014 14:09:34 -0500
>
> ls knows nothing of wildcards, that's the shell's business.
Not on Windows, where the wildcards are expanded by the application's
startup code.
^ permalink raw reply [flat|nested] 21+ messages in thread
* bug#16884: 24.3.50; desktop-read should not die on non-existing directories
2014-02-26 17:28 ` Glenn Morris
2014-02-26 17:35 ` Glenn Morris
@ 2014-02-26 17:40 ` Juanma Barranquero
1 sibling, 0 replies; 21+ messages in thread
From: Juanma Barranquero @ 2014-02-26 17:40 UTC (permalink / raw)
To: Glenn Morris; +Cc: Sam Steingold, 16884
On Wed, Feb 26, 2014 at 6:28 PM, Glenn Morris <rgm@gnu.org> wrote:
> mkdir /tmp/foo
> touch /tmp/foo/1
> emacs -Q
> M-x dired /tmp/foo/* ; why not just /tmp/foo ... ?
> M-x desktop-save RET /tmp RET
> M-x kill-emacs
>
> rm /tmp/foo/1 ; not rm -rf /tmp/foo
>
> emacs -Q
> M-: (desktop-read "/tmp")
>
> -> Debugger entered--Lisp error: (file-error "Reading directory"
> "no such file or directory" "/tmp/foo/*")
Doesn't happen on Windows. I get a buffer named "*", with contents:
c:/Windows/Temp/foo:
wildcard *
total used in directory 12 available 57142624
drwxrwxrwx 1 Administradores None 0 feb 26 18:36 .
drwxrwxrwx 1 Administradores Administradores 12288 feb 26 18:35 ..
^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2014-02-26 20:31 UTC | newest]
Thread overview: 21+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-25 19:06 bug#16884: 24.3.50; desktop-read should not die on non-existing directories Sam Steingold
2014-02-25 21:08 ` Juanma Barranquero
2014-02-26 17:28 ` Glenn Morris
2014-02-26 17:35 ` Glenn Morris
2014-02-26 17:47 ` Juanma Barranquero
2014-02-26 18:15 ` Sam Steingold
2014-02-26 18:18 ` Juanma Barranquero
2014-02-26 18:36 ` Glenn Morris
2014-02-26 18:49 ` Juanma Barranquero
2014-02-26 19:22 ` Glenn Morris
2014-02-26 20:31 ` Juanma Barranquero
2014-02-26 18:38 ` Sam Steingold
2014-02-26 18:20 ` Eli Zaretskii
2014-02-26 18:28 ` Juanma Barranquero
2014-02-26 18:34 ` Eli Zaretskii
2014-02-26 18:36 ` Juanma Barranquero
2014-02-26 19:04 ` Eli Zaretskii
2014-02-26 19:09 ` Glenn Morris
2014-02-26 19:13 ` Eli Zaretskii
2014-02-26 19:20 ` Glenn Morris
2014-02-26 17:40 ` Juanma Barranquero
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.