From: Rainer M Krug <Rainer@krugs.de>
To: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Cc: emacs-orgmode@gnu.org
Subject: Re: [RFC] Org linting library
Date: Wed, 20 May 2015 17:24:54 +0200 [thread overview]
Message-ID: <m2oalfl1a1.fsf@krugs.de> (raw)
In-Reply-To: <m2siarl21m.fsf@krugs.de> (Rainer M. Krug's message of "Wed, 20 May 2015 17:08:21 +0200")
[-- Attachment #1: Type: text/plain, Size: 5644 bytes --]
Rainer M Krug <Rainer@krugs.de> writes:
> Rainer M Krug <Rainer@krugs.de> writes:
>
>> Andreas Leha <andreas.leha@med.uni-goettingen.de> writes:
>>
>>> Hi Rainer,
>>>
>>> Rainer M Krug <Rainer@krugs.de> writes:
>>>> Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
>>>>
>>>>> Hello,
>>>>>
>>>>> The following library implements linting for Org syntax. The sole public
>>>>> function is `org-lint', which see.
>>>>>
>>>>> Internally, the library defines a new structure: `org-lint-checker',
>>>>> with the following slots:
>>>>>
>>>>> - NAME: Unique check identifier, as a symbol. The check is done
>>>>> calling the function `org-lint-NAME' with one mandatory argument,
>>>>> the parse tree describing the current Org buffer. Such function
>>>>> calls are wrapped within a `save-excursion' and point is always at
>>>>> `point-min'. Its return value has to be an alist (POSITION MESSAGE)
>>>>> when POSITION refer to the buffer position of the error, as an
>>>>> integer, and MESSAGE is a strings describing the error.
>>>>>
>>>>> - DESCRIPTION: Summary about the check, as a string.
>>>>>
>>>>> - CATEGORIES: Categories relative to the check, as a list of symbol.
>>>>> They are used for filtering when calling `org-lint'. Checkers not
>>>>> explicitly associated to a category are collected in the `default'
>>>>> one.
>>>>>
>>>>> - TRUST: The trust level one can have in the check. It is either `low'
>>>>> or `high', depending on the heuristics implemented and the nature of
>>>>> the check. This has an indicative value only and is displayed along
>>>>> reports.
>>>>>
>>>>> All checks have to be listed in `org-lint--checkers'.
>>>>>
>>>>> Results are displayed in a special "*Org Lint*" buffer with a dedicated
>>>>> major mode, derived from `tabulated-list-mode'. In addition to the usual
>>>>> key-bindings inherited from it, "C-j" displays problematic line reported
>>>>> under point and "RET" jumps to it.
>>>>>
>>>>> Checks currently implemented are:
>>>>>
>>>>> - duplicates CUSTOM_ID properties
>>>>> - duplicate NAME values
>>>>> - duplicate targets
>>>>> - duplicate footnote definitions
>>>>> - orphaned affiliated keywords
>>>>> - obsolete affiliated keywords
>>>>> - missing language in src blocks
>>>>> - NAME values with a colon
>>>>> - wrong header arguments in src blocks
>>>>> - misuse of CATEGORY keyword
>>>>> - "coderef" links with unknown destination
>>>>> - "custom-id" links with unknown destination
>>>>> - "fuzzy" links with unknown destination
>>>>> - "id" links with unknown destination
>>>>> - links to non-existent local files
>>>>> - special properties in properties drawer
>>>>> - obsolete syntax for PROPERTIES drawers
>>>>> - missing definition for footnote references
>>>>> - missing reference for footnote definitions
>>>>> - non-footnote definitions in footnote section
>>>>> - probable invalid keywords
>>>>> - invalid blocks
>>>>> - probable incomplete drawers
>>>>> - obsolete QUOTE section
>>>>>
>>>>> Since it relies on lexical binding, `pcase' and `string-prefix-p', it
>>>>> cannot be added to Org 8.3, but can make it into Org 8.4, if deemed
>>>>> useful enough.
>>>>>
>>>>
>>>> This sounds very interesting and I would like to try it out. I
>>>> understand that it can't be put into master, but could it be put into a
>>>> branch?
>>>>
>>>> This would make testing a bit easier.
>>>>
>>>
>>> It is. The branch is called `wip-lint'.
>>
>> Thanks (also to Nicolas) - I found it. Just expected the branch to be
>> tracked automatically.
>>
>> This is really brilliant!
>>
>> But I now get a message in one .org file:
>>
>> ,----
>> | Org linting process starting...
>> | Search failed: "^[ ]*#\\+NAME: +tab:sensVar"
>> `----
>>
>> and no results.
>>
>> Works in other .org files.
>>
>> This one is rather long (11570 lines) and many code blocks.
>>
>> Just let me know how I can trace down where this is coming from and what
>> the message tells me.
>
> It seems that the error comes from the fact that ~#+LABEL: sensVar~ was
> defined twice.
>
> Renaming these results in working linting.
OK - please ignore this last comment.
There is an example where I get the error:
--8<---------------cut here---------------start------------->8---
* Fitting the kernel to the data
The parameter which will be fitted can be found in Table [[tab:fitInitial]]
#+CAPTION: Variables used for the initial fit of the wind profile using the function and the initial values.
#+LABEL: tab:fitInitial
| variable | initial value | remark |
|--------------------+---------------+--------------------------------------------------|
--8<---------------cut here---------------end--------------->8---
The cause is the link [[tab:initial]] If I remove everything below and
including the line #+CAPTION the linting works.
,----
| 2 high Unknown fuzzy location "tab:fitInitial"
`----
Cheers,
Rainer
>
> Rainer
>
>>
>> Thanks,
>>
>> Rainer
>>
>>>
>>> Regards,
>>> Andreas
>>>
>>>
--
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa
Tel : +33 - (0)9 53 10 27 44
Cell: +33 - (0)6 85 62 59 98
Fax : +33 - (0)9 58 10 27 44
Fax (D): +49 - (0)3 21 21 25 22 44
email: Rainer@krugs.de
Skype: RMkrug
PGP: 0x0F52F982
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 494 bytes --]
next prev parent reply other threads:[~2015-05-20 15:25 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 13:31 [RFC] Org linting library Nicolas Goaziou
2015-04-19 14:23 ` Rasmus
2015-04-19 16:24 ` Nicolas Goaziou
2015-04-19 19:32 ` Marco Wahl
2015-04-20 10:42 ` Nicolas Goaziou
2015-04-20 2:15 ` Charles C. Berry
2015-04-20 9:12 ` Nicolas Goaziou
2015-04-22 19:27 ` Nicolas Goaziou
2015-04-22 19:31 ` Sebastien Vauban
2015-04-22 19:40 ` Nicolas Goaziou
2015-04-23 10:47 ` Eric Abrahamsen
2015-04-23 16:25 ` Sebastien Vauban
2015-04-26 12:50 ` Nicolas Goaziou
2015-04-27 15:22 ` Doug Lewan
2015-05-19 11:54 ` Andreas Leha
2015-05-19 13:39 ` Nicolas Goaziou
2015-05-19 14:54 ` Andreas Leha
2015-05-19 19:09 ` Nicolas Goaziou
2015-05-19 20:02 ` Andreas Leha
2015-05-19 21:03 ` Nicolas Goaziou
2015-05-19 21:10 ` Andreas Leha
2015-05-19 21:26 ` Nicolas Goaziou
2015-05-19 21:35 ` Andreas Leha
2015-05-19 13:32 ` Rainer M Krug
2015-05-19 13:43 ` Andreas Leha
2015-05-20 15:01 ` Rainer M Krug
2015-05-20 15:08 ` Rainer M Krug
2015-05-20 15:24 ` Rainer M Krug [this message]
2015-05-20 20:42 ` Andreas Leha
2015-05-20 21:15 ` Rainer M Krug
2015-05-20 21:46 ` Nicolas Goaziou
2015-05-21 8:40 ` Rainer M Krug
2015-05-21 16:24 ` Nicolas Goaziou
2015-05-21 18:18 ` Rainer M Krug
2015-05-21 18:23 ` Rainer M Krug
2015-05-21 18:30 ` Rainer M Krug
2015-05-21 21:53 ` Nicolas Goaziou
2015-05-22 8:10 ` Rainer M Krug
2015-05-22 19:08 ` Nicolas Goaziou
2015-05-23 12:00 ` Rainer M Krug
2015-05-24 15:19 ` Nicolas Goaziou
2015-05-24 15:52 ` Rainer M Krug
2015-05-27 9:31 ` Andreas Leha
2015-05-27 10:49 ` Nicolas Goaziou
2015-05-19 13:47 ` Nicolas Goaziou
2015-06-05 10:51 ` Rainer M Krug
2015-06-05 21:40 ` Nicolas Goaziou
2015-06-06 14:44 ` Rainer M Krug
2015-06-06 23:22 ` Nicolas Goaziou
2015-06-08 7:50 ` Rainer M Krug
2015-06-09 7:30 ` Nicolas Goaziou
2015-06-09 7:50 ` Rainer M Krug
2015-06-16 21:54 ` Nicolas Goaziou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2oalfl1a1.fsf@krugs.de \
--to=rainer@krugs.de \
--cc=emacs-orgmode@gnu.org \
--cc=mail@nicolasgoaziou.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.