all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* MacOS X:  Carbon Emacs problem
@ 2003-11-06 21:06 Rolf Marvin Bøe Lindgren
  2003-12-01  0:39 ` Martin Fredriksson
  0 siblings, 1 reply; 5+ messages in thread
From: Rolf Marvin Bøe Lindgren @ 2003-11-06 21:06 UTC (permalink / raw)


If I call LaTeX from GNU Emacs under Carbon (i.e. the usual way), then
processing takes ages.  if I run Emacs without Carbon, i.e. emacs -nw,
then LaTeX processing runs at the same speed as when called from the
shell. 

latest cvs build of GNU Emacs (this has been this way for a long time
now), latest version of auc-tex.  
-- 
Rolf Lindgren                                            http://www.roffe.com/
roffe@tag.uio.no

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: MacOS X:  Carbon Emacs problem
  2003-11-06 21:06 MacOS X: Carbon Emacs problem Rolf Marvin Bøe Lindgren
@ 2003-12-01  0:39 ` Martin Fredriksson
  2003-12-01  1:16   ` David Kastrup
  0 siblings, 1 reply; 5+ messages in thread
From: Martin Fredriksson @ 2003-12-01  0:39 UTC (permalink / raw)
  Cc: emacs-devel

On 6 nov 2003, at 22.06, Rolf Marvin Bøe Lindgren wrote:

> If I call LaTeX from GNU Emacs under Carbon (i.e. the usual way), then
> processing takes ages.  if I run Emacs without Carbon, i.e. emacs -nw,
> then LaTeX processing runs at the same speed as when called from the
> shell.
>
> latest cvs build of GNU Emacs (this has been this way for a long time
> now), latest version of auc-tex.

I experience the same.  I think the reason may be that it takes longer 
to log the result in the latex output buffer on Emacs/Carbon?

/m

--
Martin Fredriksson <m@rfc.se>, phone: +46 730 59 77 00
Guide Konsult Göteborg AB, Sweden

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: MacOS X:  Carbon Emacs problem
  2003-12-01  0:39 ` Martin Fredriksson
@ 2003-12-01  1:16   ` David Kastrup
  2003-12-01  2:23     ` Martin Fredriksson
  0 siblings, 1 reply; 5+ messages in thread
From: David Kastrup @ 2003-12-01  1:16 UTC (permalink / raw)
  Cc: Rolf Marvin Bøe Lindgren, emacs-devel

Martin Fredriksson <martin@rfc.se> writes:

> On 6 nov 2003, at 22.06, Rolf Marvin Bøe Lindgren wrote:
> 
> > If I call LaTeX from GNU Emacs under Carbon (i.e. the usual way),
> > then processing takes ages.  if I run Emacs without Carbon,
> > i.e. emacs -nw, then LaTeX processing runs at the same speed as
> > when called from the shell.
> >
> > latest cvs build of GNU Emacs (this has been this way for a long
> > time now), latest version of auc-tex.
> 
> I experience the same.  I think the reason may be that it takes
> longer to log the result in the latex output buffer on Emacs/Carbon?

Let me guess.  You are working on a single processor system.  The
reason for this may well be something which I already brought up here
once which will on _many_ single processor operating systems result
in _very_ inefficient operation: when Emacs is listening on a pipe,
it will wake up and process a single byte willingly.  But while Emacs
is processing this single byte (and Emacs usually is rated an
interactive application by the scheduler and thus does not get
preempted), the application producing the byte does not get any CPU
time.  So when Emacs has finished processing that single byte and
gives back the CPU to the scheduler, the output generating program
will again just generate a single byte (or sometimes line) before
Emacs gets control of the CPU again.  But it is maximally inefficient
to have a pipe only be processed with such small units.

Try some of the following remedies:

M-x customize-variable TeX-command-list RET

And then append to the TeXing command you usually use

|dd obs=8k

which should fill the pipe with much larger chunks.  Another
possibility is to do

(defadvice TeX-command-filter (before TeX-pipe-fill)
  (when (< (length string) 80)
     (sleep-for 0.05)))

This will, in case the filter function receives only a short string,
actively yield the CPU for a moment in which the pipe can fill some
more.  Please report whether this increases throughput on your
machine.

I am still of the opinion that this problem is so common among
operating systems (I have the same problem on Linux) that we should
teach Emacs to voluntary yield a bit of CPU when it finds itself
processing almost empty pipes all the time.

In general, the current behavior makes almost all comint modes awfully
slow.  I think one should try to read a full pipe's worth of data with
small timeout usually.  If the pipe does not get full, then we will
have had the CPU idle a bit unnecessarily, but that means that the
output generating application actually leaves us enough time so that
we can afford it.  The disadvantage is that if we are talking some
protocol with an interactive daemon process, we will always take at
least a tick of time to respond.  But maybe one can set a flag when
sending to some process that will take this sort of CPU throttling off
the process for the next received data.

-- 
David Kastrup, Kriemhildstr. 15, 44793 Bochum

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: MacOS X:  Carbon Emacs problem
  2003-12-01  1:16   ` David Kastrup
@ 2003-12-01  2:23     ` Martin Fredriksson
  2003-12-01  2:35       ` David Kastrup
  0 siblings, 1 reply; 5+ messages in thread
From: Martin Fredriksson @ 2003-12-01  2:23 UTC (permalink / raw)
  Cc: Rolf Marvin Bøe Lindgren, emacs-devel

Thanks for a very informative (and quick!) answer.  The 'dd obs=8k' 
really improved speed!  Great!  The filter did not noticably improve 
speed; I have not experimented with different sleep times (do you want 
me to do that?).

I understand your explanations, but I know much too little about the 
issues to have a clear opinion about what fix is right.

Thanks again!

Martin F

On 1 dec 2003, at 02.16, David Kastrup wrote:

> Martin Fredriksson <martin@rfc.se> writes:
>
>> On 6 nov 2003, at 22.06, Rolf Marvin Bøe Lindgren wrote:
>>
>>> If I call LaTeX from GNU Emacs under Carbon (i.e. the usual way),
>>> then processing takes ages.  if I run Emacs without Carbon,
>>> i.e. emacs -nw, then LaTeX processing runs at the same speed as
>>> when called from the shell.
>>>
>>> latest cvs build of GNU Emacs (this has been this way for a long
>>> time now), latest version of auc-tex.
>>
>> I experience the same.  I think the reason may be that it takes
>> longer to log the result in the latex output buffer on Emacs/Carbon?
>
> Let me guess.  You are working on a single processor system.  The
> reason for this may well be something which I already brought up here
> once which will on _many_ single processor operating systems result
> in _very_ inefficient operation: when Emacs is listening on a pipe,
> it will wake up and process a single byte willingly.  But while Emacs
> is processing this single byte (and Emacs usually is rated an
> interactive application by the scheduler and thus does not get
> preempted), the application producing the byte does not get any CPU
> time.  So when Emacs has finished processing that single byte and
> gives back the CPU to the scheduler, the output generating program
> will again just generate a single byte (or sometimes line) before
> Emacs gets control of the CPU again.  But it is maximally inefficient
> to have a pipe only be processed with such small units.
>
> Try some of the following remedies:
>
> M-x customize-variable TeX-command-list RET
>
> And then append to the TeXing command you usually use
>
> |dd obs=8k
>
> which should fill the pipe with much larger chunks.  Another
> possibility is to do
>
> (defadvice TeX-command-filter (before TeX-pipe-fill)
>   (when (< (length string) 80)
>      (sleep-for 0.05)))
>
> This will, in case the filter function receives only a short string,
> actively yield the CPU for a moment in which the pipe can fill some
> more.  Please report whether this increases throughput on your
> machine.
>
> I am still of the opinion that this problem is so common among
> operating systems (I have the same problem on Linux) that we should
> teach Emacs to voluntary yield a bit of CPU when it finds itself
> processing almost empty pipes all the time.
>
> In general, the current behavior makes almost all comint modes awfully
> slow.  I think one should try to read a full pipe's worth of data with
> small timeout usually.  If the pipe does not get full, then we will
> have had the CPU idle a bit unnecessarily, but that means that the
> output generating application actually leaves us enough time so that
> we can afford it.  The disadvantage is that if we are talking some
> protocol with an interactive daemon process, we will always take at
> least a tick of time to respond.  But maybe one can set a flag when
> sending to some process that will take this sort of CPU throttling off
> the process for the next received data.
>
> -- 
> David Kastrup, Kriemhildstr. 15, 44793 Bochum

--
Martin Fredriksson <m@rfc.se>, phone: +46 730 59 77 00
Guide Konsult Göteborg AB, Sweden

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: MacOS X:  Carbon Emacs problem
  2003-12-01  2:23     ` Martin Fredriksson
@ 2003-12-01  2:35       ` David Kastrup
  0 siblings, 0 replies; 5+ messages in thread
From: David Kastrup @ 2003-12-01  2:35 UTC (permalink / raw)
  Cc: Rolf Marvin Bøe Lindgren, emacs-devel

[Toppost rearranged]

Martin Fredriksson <m@rfc.se> writes:

> > Let me guess.  You are working on a single processor system.  The
> > reason for this may well be something which I already brought up
> > here once which will on _many_ single processor operating systems
> > result in _very_ inefficient operation: when Emacs is listening on
> > a pipe, it will wake up and process a single byte willingly.  But
> > while Emacs is processing this single byte (and Emacs usually is
> > rated an interactive application by the scheduler and thus does
> > not get preempted), the application producing the byte does not
> > get any CPU time.  So when Emacs has finished processing that
> > single byte and gives back the CPU to the scheduler, the output
> > generating program will again just generate a single byte (or
> > sometimes line) before Emacs gets control of the CPU again.  But
> > it is maximally inefficient to have a pipe only be processed with
> > such small units.
> >
> > Try some of the following remedies:
> >
> > M-x customize-variable TeX-command-list RET
> >
> > And then append to the TeXing command you usually use
> >
> > |dd obs=8k
> >
> > which should fill the pipe with much larger chunks.  Another
> > possibility is to do
> >
> > (defadvice TeX-command-filter (before TeX-pipe-fill)
> >   (when (< (length string) 80)
> >      (sleep-for 0.05)))
> >
> > This will, in case the filter function receives only a short string,
> > actively yield the CPU for a moment in which the pipe can fill some
> > more.  Please report whether this increases throughput on your
> > machine.

> Thanks for a very informative (and quick!) answer.  The 'dd obs=8k'
> really improved speed!  Great!  The filter did not noticably improve
> speed; I have not experimented with different sleep times (do you
> want me to do that?).

Before you do that, it might make more sense to just activate the
advice in the first place.  I am so stupid.  Try

(defadvice TeX-command-filter (before TeX-pipe-fill activate)
  (when (< (length string) 80)
     (sleep-for 0.05)))

[rest snipped to spare the list a repetition of my proposal]

It would also be nice if you tried looking at what difference in real
time those changes make on your machine, just to press home the point.

-- 
David Kastrup, Kriemhildstr. 15, 44793 Bochum

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2003-12-01  2:35 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-11-06 21:06 MacOS X: Carbon Emacs problem Rolf Marvin Bøe Lindgren
2003-12-01  0:39 ` Martin Fredriksson
2003-12-01  1:16   ` David Kastrup
2003-12-01  2:23     ` Martin Fredriksson
2003-12-01  2:35       ` David Kastrup

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.