* Re: [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation. [not found] ` <20161223195027.7C9E52201BC@vcs.savannah.gnu.org> @ 2016-12-23 23:49 ` Stefan Monnier 2016-12-24 6:58 ` Jackson Ray Hamilton 0 siblings, 1 reply; 5+ messages in thread From: Stefan Monnier @ 2016-12-23 23:49 UTC (permalink / raw) To: emacs-devel; +Cc: Jackson Ray Hamilton > + tar -ch $$pt/*.el --no-recursion \ > + --exclude-vcs -X "$${pt}/.elpaignore" \ > + | tar --list; \ I think we can skip the second tar with something like "tar -cvhf /dev/null 2>&1". But I have a question: are we sure that tar will always apply the -X "$${pt}/.elpaignore" patterns to the files explicitly mentioned on the command line? Stefan ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation. 2016-12-23 23:49 ` [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation Stefan Monnier @ 2016-12-24 6:58 ` Jackson Ray Hamilton 2016-12-26 4:16 ` Stefan Monnier 0 siblings, 1 reply; 5+ messages in thread From: Jackson Ray Hamilton @ 2016-12-24 6:58 UTC (permalink / raw) To: Stefan Monnier, emacs-devel > I think we can skip the second tar with something like > "tar -cvhf /dev/null 2>&1". I tried this before, and again just now, but it does not cause make to execute at a significantly different speed on my machine. Is the effect more noticeable on yours? > But I have a question: are we sure that tar will always apply the -X > "$${pt}/.elpaignore" patterns to the files explicitly mentioned on the > command line? Good point. I suppose not in this instance, where I get no output: $ mkdir -p a/a $ touch a/b.el a/a/b.el $ echo 'a/b.el' > a/.elpaignore $ tar -ch a/*.el --no-recursion --exclude-vcs -X a/.elpaignore \ | tar --list Since .elpaignore is inside the project directory, I assume that we should be treating .elpaignore as matching relative to inside the project root. We should cd into the project directory first, so we don't accidentally match against the project's directory's name, too. $ cd a $ tar -ch *.el --no-recursion --exclude-vcs -X .elpaignore | tar --list The above command correctly yields "b.el". Did you have any other cases in mind? On 12/23/2016 03:49 PM, Stefan Monnier wrote: >> + tar -ch $$pt/*.el --no-recursion \ >> + --exclude-vcs -X "$${pt}/.elpaignore" \ >> + | tar --list; \ > > I think we can skip the second tar with something like > "tar -cvhf /dev/null 2>&1". > > But I have a question: are we sure that tar will always apply the -X > "$${pt}/.elpaignore" patterns to the files explicitly mentioned on the > command line? > > > Stefan > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation. 2016-12-24 6:58 ` Jackson Ray Hamilton @ 2016-12-26 4:16 ` Stefan Monnier 2016-12-26 19:57 ` Jackson Ray Hamilton 0 siblings, 1 reply; 5+ messages in thread From: Stefan Monnier @ 2016-12-26 4:16 UTC (permalink / raw) To: Jackson Ray Hamilton; +Cc: emacs-devel >> I think we can skip the second tar with something like >> "tar -cvhf /dev/null 2>&1". > I tried this before, and again just now, but it does not cause make to > execute at a significantly different speed on my machine. Is the effect > more noticeable on yours? I haven't looked at the performance side of this. It just seemed simpler. > $ cd a > $ tar -ch *.el --no-recursion --exclude-vcs -X .elpaignore | tar --list > > The above command correctly yields "b.el". > > Did you have any other cases in mind? No, I was rather wondering if this behavior is documented or just accidental. Stefan ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation. 2016-12-26 4:16 ` Stefan Monnier @ 2016-12-26 19:57 ` Jackson Ray Hamilton 2016-12-27 3:29 ` Stefan Monnier 0 siblings, 1 reply; 5+ messages in thread From: Jackson Ray Hamilton @ 2016-12-26 19:57 UTC (permalink / raw) To: Stefan Monnier; +Cc: emacs-devel [-- Attachment #1: Type: text/plain, Size: 1948 bytes --] > I haven't looked at the performance side of this. It just seemed simpler. I say we keep it as-is, as my reading of the current commands is simpler than the way I read this alternative. Compare the way I read it: "Make a tar archive and list its contents." Versus: "Execute tar with verbose output, which happens to only include the files packaged, also that output needs to be redirected from stderr to stdout for make to process it, also bury the archive contents in /dev/null so as not to interfere with the redirected verbose output." > No, I was rather wondering if this behavior is documented or just accidental. Although I do not see an example of an explicitly mentioned file argument used with an exclusion flag in the tar manual, the language of the manual suggests that this should work: > `--exclude-from=file' > `-X file' > > Causes tar to ignore files that match the patterns listed in file. "Files" ought to include explicitly mentioned files. Also, I've attached a patch for the "pwd-based exclusions" issue I mentioned in my last email. I checked the timing on it, and it only reduces the speed of "make" with nothing to do by about 50ms. Does it look good to you? Jackson On 12/25/2016 08:16 PM, Stefan Monnier wrote: >>> I think we can skip the second tar with something like >>> "tar -cvhf /dev/null 2>&1". >> I tried this before, and again just now, but it does not cause make to >> execute at a significantly different speed on my machine. Is the effect >> more noticeable on yours? > > I haven't looked at the performance side of this. It just seemed simpler. > >> $ cd a >> $ tar -ch *.el --no-recursion --exclude-vcs -X .elpaignore | tar --list >> >> The above command correctly yields "b.el". >> >> Did you have any other cases in mind? > > No, I was rather wondering if this behavior is documented or just accidental. > > > Stefan > [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: 0001-Change-to-package-directory-before-checking-.elpaign.patch --] [-- Type: text/x-patch; name="0001-Change-to-package-directory-before-checking-.elpaign.patch", Size: 1616 bytes --] From e05054c3f9b6cf6ee0dbeafd0438b562f06afc64 Mon Sep 17 00:00:00 2001 From: Jackson Ray Hamilton <jackson@jacksonrayhamilton.com> Date: Mon, 26 Dec 2016 11:25:21 -0800 Subject: [PATCH] Change to package directory before checking .elpaignore exclusions. If we don't do this, the package's directory's name is included in the file names that are checked for .elpaignore matches. .elpaignore matches should be assumed to occur inside the package's directory. --- GNUmakefile | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/GNUmakefile b/GNUmakefile index 6d57fae..8edb2f8 100644 --- a/GNUmakefile +++ b/GNUmakefile @@ -150,13 +150,18 @@ $(foreach al, $(autoloads), $(eval $(call RULE-srcdeps, $(al)))) included_els := $(shell \ for pt in packages/*; do \ if [ -d $$pt ]; then \ - if [ -f "$${pt}/.elpaignore" ]; then \ - tar -ch $$pt/*.el --no-recursion \ - --exclude-vcs -X "$${pt}/.elpaignore" \ + prev=$$(pwd); \ + cd $$pt; \ + if [ -f .elpaignore ]; then \ + tar -ch *.el --no-recursion \ + --exclude-vcs -X .elpaignore \ | tar --list; \ else \ - ls -1 $$pt/*.el; \ - fi; \ + ls -1 *.el; \ + fi | while read line; \ + do echo "$${pt}/$${line}"; \ + done; \ + cd $$prev; \ fi; \ done) els := $(call FILTER-nonsrc, $(included_els)) -- 2.1.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation. 2016-12-26 19:57 ` Jackson Ray Hamilton @ 2016-12-27 3:29 ` Stefan Monnier 0 siblings, 0 replies; 5+ messages in thread From: Stefan Monnier @ 2016-12-27 3:29 UTC (permalink / raw) To: Jackson Ray Hamilton; +Cc: emacs-devel >> I haven't looked at the performance side of this. It just seemed simpler. > I say we keep it as-is, as my reading of the current commands is simpler > than the way I read this alternative. Compare the way I read it: "Make > a tar archive and list its contents." Versus: "Execute tar with verbose > output, which happens to only include the files packaged, also that > output needs to be redirected from stderr to stdout for make to process > it, also bury the archive contents in /dev/null so as not to interfere > with the redirected verbose output." Fair enough. > Also, I've attached a patch for the "pwd-based exclusions" issue I > mentioned in my last email. I checked the timing on it, and it only > reduces the speed of "make" with nothing to do by about 50ms. Does it > look good to you? Looks OK. BTW, I saw that we could do included_els := $(shell tar -cvhf /dev/null --exclude-ignore=.elpaignore \ --exclude-vcs packages 2>&1 | grep '\.el$$') except that --exclude-ignore is a fairly recent addition to GNU tar, so it doesn't even work in Debian stable. Stefan ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-12-27 3:29 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <20161223195027.29384.58430@vcs.savannah.gnu.org> [not found] ` <20161223195027.7C9E52201BC@vcs.savannah.gnu.org> 2016-12-23 23:49 ` [elpa] master 580a1b6: Respect .elpaignore when compiling and optimize compilation Stefan Monnier 2016-12-24 6:58 ` Jackson Ray Hamilton 2016-12-26 4:16 ` Stefan Monnier 2016-12-26 19:57 ` Jackson Ray Hamilton 2016-12-27 3:29 ` Stefan Monnier
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/emacs.git https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.