all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* Lost or corrupted `undo-tree' history
@ 2020-01-08 22:45 Alexander Shukaev
  2020-01-10  8:07 ` Eli Zaretskii
  2020-02-18 17:39 ` Stefan Monnier
  0 siblings, 2 replies; 7+ messages in thread
From: Alexander Shukaev @ 2020-01-08 22:45 UTC (permalink / raw)
  To: emacs-devel

I'm sure some of you have already seen the new update to the `undo-tree' 
package which is supposed to fix the dreaded issue with either loss or 
corruption of undo history.  However, for those who don't know there is 
a great blog post with exhaustive analysis of the issue and how it must 
(allegedly) be resolved now with the new release [1].

A good read for anyone and especially experienced Emacs developers or 
power users who can suggest some improvements to the analysis and/or 
solution(s).  One point from my side about the corruption solution 
(which seems to not be set in stone yet as a final remedy, but rather a 
test release that would only show after some time whether the issue is 
truly gone), I believe the garbage collector can be temporarily disabled 
by simply wrapping the body of `undo-list-transfer-to-tree' into the 
following `let' form:

(let ((gc-cons-threshold most-positive-fixnum))
   ...)

Thoughts?

[1] http://www.dr-qubit.org/Lost_undo-tree_history.html



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-08 22:45 Lost or corrupted `undo-tree' history Alexander Shukaev
@ 2020-01-10  8:07 ` Eli Zaretskii
  2020-01-10  9:19   ` Alexander Shukaev
  2020-02-18 17:39 ` Stefan Monnier
  1 sibling, 1 reply; 7+ messages in thread
From: Eli Zaretskii @ 2020-01-10  8:07 UTC (permalink / raw)
  To: Alexander Shukaev; +Cc: emacs-devel

> From: Alexander Shukaev <emacs@Alexander.Shukaev.name>
> Date: Wed, 8 Jan 2020 23:45:35 +0100
> 
> I believe the garbage collector can be temporarily disabled 
> by simply wrapping the body of `undo-list-transfer-to-tree' into the 
> following `let' form:
> 
> (let ((gc-cons-threshold most-positive-fixnum))
>    ...)

IMO, it would be a very bad mantra for a Lisp package operating on
this low level to disable GC, because that could cause the user's
system to run out of memory, and Emacs be killed by the likes of OOM
killer agents.  Disabling GC is barely a good idea on the
user-customization level, certainly not in packages such as undo-tree.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-10  8:07 ` Eli Zaretskii
@ 2020-01-10  9:19   ` Alexander Shukaev
  2020-01-10  9:31     ` Eli Zaretskii
  2020-01-11  0:45     ` Stefan Monnier
  0 siblings, 2 replies; 7+ messages in thread
From: Alexander Shukaev @ 2020-01-10  9:19 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: emacs-devel

On 1/10/20 9:07 AM, Eli Zaretskii wrote:
>> From: Alexander Shukaev <emacs@Alexander.Shukaev.name>
>> Date: Wed, 8 Jan 2020 23:45:35 +0100
>>
>> I believe the garbage collector can be temporarily disabled
>> by simply wrapping the body of `undo-list-transfer-to-tree' into the
>> following `let' form:
>>
>> (let ((gc-cons-threshold most-positive-fixnum))
>>     ...)
> 
> IMO, it would be a very bad mantra for a Lisp package operating on
> this low level to disable GC, because that could cause the user's
> system to run out of memory, and Emacs be killed by the likes of OOM
> killer agents.  Disabling GC is barely a good idea on the
> user-customization level, certainly not in packages such as undo-tree.
> 

Maybe.  I was under impression that for a "short-running" function this 
might be fine to prevent GC from running in-between some Emacs Lisp 
instructions.

Having said that, I agree that disabling GC sometimes may be dangerous 
practice.  I remember how after reading [1], I tried that suggestion for 
minibuffer.  After some time I noticed that I keep running out of 
memory.  What was interesting is the actual test case.  For example, I 
could run some search command which pushes matches into minibuffer, say 
up to 100 000 matches.  As this is happening (and `gc-cons-threshold' is 
`most-positive-fixnum'), I can see memory consumption of Emacs growing 
rapidly say from 500MB up to 8GB at which point I cancel the search and 
exit the minibuffer command.  As a result, `gc-cons-threshold' comes 
back to the default value and garbage collecting starts immediately. 
However, the memory consumption of Emacs does not fall back to 500MB, 
but rather goes down to only e.g. 6GB, which afterwards are never ever 
reclaimed.  If I repeat the test, the memory consumption would 
immediately continue to grow off 6GB further as if those 6GB are not 
reused and are somehow stuck holding something that cannot be reclaimed 
anymore.  Hence, you can see that if I way same amount of time, the 
memory consumption would go to around 14GB.  This is how one can quickly 
run out of memory as if there would be some memory leaks related to GC.

Now, I have no experience to say whether lower (e.g. default) values of 
`gc-cons-threshold' don't trigger memory leaks or they simply go 
unnoticed because the memory consumption grows very slowly.  Since, 
theoretically, GC memory leak if present should be there regardless of 
`gc-cons-threshold'.  Thoughts?

Nevertheless, the second suggestion (for speeding up initialization 
code) from [1], IMO, is a good example of temporarily blowing 
`gc-cons-threshold' which I still use.

[1] 
https://bling.github.io/blog/2016/01/18/why-are-you-changing-gc-cons-threshold/



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-10  9:19   ` Alexander Shukaev
@ 2020-01-10  9:31     ` Eli Zaretskii
  2020-01-10 10:27       ` Alexander Shukaev
  2020-01-11  0:45     ` Stefan Monnier
  1 sibling, 1 reply; 7+ messages in thread
From: Eli Zaretskii @ 2020-01-10  9:31 UTC (permalink / raw)
  To: Alexander Shukaev; +Cc: emacs-devel

> Cc: emacs-devel@gnu.org
> From: Alexander Shukaev <emacs@Alexander.Shukaev.name>
> Date: Fri, 10 Jan 2020 10:19:15 +0100
> 
> > IMO, it would be a very bad mantra for a Lisp package operating on
> > this low level to disable GC, because that could cause the user's
> > system to run out of memory, and Emacs be killed by the likes of OOM
> > killer agents.  Disabling GC is barely a good idea on the
> > user-customization level, certainly not in packages such as undo-tree.
> 
> Maybe.  I was under impression that for a "short-running" function this 
> might be fine to prevent GC from running in-between some Emacs Lisp 
> instructions.

You can never know whether a given function is "short-running" or not
in Emacs, not with the multitude of hooks and advices we have.  You
_might_ be able to make that assumption safely on the C level, but
even there, it's non-trivial to prove to ourselves no Lisp could ever
run in between.  For Lisp code, this is simply impossible to prove.

> Having said that, I agree that disabling GC sometimes may be dangerous 
> practice.  I remember how after reading [1], I tried that suggestion for 
> minibuffer.  After some time I noticed that I keep running out of 
> memory.  What was interesting is the actual test case.  For example, I 
> could run some search command which pushes matches into minibuffer, say 
> up to 100 000 matches.  As this is happening (and `gc-cons-threshold' is 
> `most-positive-fixnum'), I can see memory consumption of Emacs growing 
> rapidly say from 500MB up to 8GB at which point I cancel the search and 
> exit the minibuffer command.  As a result, `gc-cons-threshold' comes 
> back to the default value and garbage collecting starts immediately. 
> However, the memory consumption of Emacs does not fall back to 500MB, 
> but rather goes down to only e.g. 6GB, which afterwards are never ever 
> reclaimed.

I believe this is the expected behavior of memory allocation routines
on GNU/Linux.  Freed memory is not necessarily returned to the system,
but kept in the process's address space as free memory to be used for
future allocations.

> If I repeat the test, the memory consumption would immediately
> continue to grow off 6GB further as if those 6GB are not reused and
> are somehow stuck holding something that cannot be reclaimed
> anymore.  Hence, you can see that if I way same amount of time, the
> memory consumption would go to around 14GB.  This is how one can
> quickly run out of memory as if there would be some memory leaks
> related to GC.

There are no memory leaks.  Just don't set gc-cons-threshold too high,
that's all.

> Nevertheless, the second suggestion (for speeding up initialization 
> code) from [1], IMO, is a good example of temporarily blowing 
> `gc-cons-threshold' which I still use.

I disagree.  Kids, don't try that at home!  I posted several times on
reddit and elsewhere the procedure I propose to follow to raise the
threshold in a conservative and controlled way, to satisfy the
personal needs of any particular user, without risking any system-wide
degradation in memory pressure.



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-10  9:31     ` Eli Zaretskii
@ 2020-01-10 10:27       ` Alexander Shukaev
  0 siblings, 0 replies; 7+ messages in thread
From: Alexander Shukaev @ 2020-01-10 10:27 UTC (permalink / raw)
  To: Eli Zaretskii; +Cc: emacs-devel

On 1/10/20 10:31 AM, Eli Zaretskii wrote:
>> Cc: emacs-devel@gnu.org
>> From: Alexander Shukaev <emacs@Alexander.Shukaev.name>
>> Date: Fri, 10 Jan 2020 10:19:15 +0100
>>
>>> IMO, it would be a very bad mantra for a Lisp package operating on
>>> this low level to disable GC, because that could cause the user's
>>> system to run out of memory, and Emacs be killed by the likes of OOM
>>> killer agents.  Disabling GC is barely a good idea on the
>>> user-customization level, certainly not in packages such as undo-tree.
>>
>> Maybe.  I was under impression that for a "short-running" function this
>> might be fine to prevent GC from running in-between some Emacs Lisp
>> instructions.
> 
> You can never know whether a given function is "short-running" or not
> in Emacs, not with the multitude of hooks and advices we have.  You
> _might_ be able to make that assumption safely on the C level, but
> even there, it's non-trivial to prove to ourselves no Lisp could ever
> run in between.  For Lisp code, this is simply impossible to prove.
> 
>> Having said that, I agree that disabling GC sometimes may be dangerous
>> practice.  I remember how after reading [1], I tried that suggestion for
>> minibuffer.  After some time I noticed that I keep running out of
>> memory.  What was interesting is the actual test case.  For example, I
>> could run some search command which pushes matches into minibuffer, say
>> up to 100 000 matches.  As this is happening (and `gc-cons-threshold' is
>> `most-positive-fixnum'), I can see memory consumption of Emacs growing
>> rapidly say from 500MB up to 8GB at which point I cancel the search and
>> exit the minibuffer command.  As a result, `gc-cons-threshold' comes
>> back to the default value and garbage collecting starts immediately.
>> However, the memory consumption of Emacs does not fall back to 500MB,
>> but rather goes down to only e.g. 6GB, which afterwards are never ever
>> reclaimed.
> 
> I believe this is the expected behavior of memory allocation routines
> on GNU/Linux.  Freed memory is not necessarily returned to the system,
> but kept in the process's address space as free memory to be used for
> future allocations.
> 
>> If I repeat the test, the memory consumption would immediately
>> continue to grow off 6GB further as if those 6GB are not reused and
>> are somehow stuck holding something that cannot be reclaimed
>> anymore.  Hence, you can see that if I way same amount of time, the
>> memory consumption would go to around 14GB.  This is how one can
>> quickly run out of memory as if there would be some memory leaks
>> related to GC.
> 
> There are no memory leaks.  Just don't set gc-cons-threshold too high,
> that's all.
> 
>> Nevertheless, the second suggestion (for speeding up initialization
>> code) from [1], IMO, is a good example of temporarily blowing
>> `gc-cons-threshold' which I still use.
> 
> I disagree.  Kids, don't try that at home!  I posted several times on
> reddit and elsewhere the procedure I propose to follow to raise the
> threshold in a conservative and controlled way, to satisfy the
> personal needs of any particular user, without risking any system-wide
> degradation in memory pressure.
> 

Understood.  Also sifting through your comments on reddit, just found 
[1], sweet!

[1] http://akrl.sdf.org/#org2a987f7



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-10  9:19   ` Alexander Shukaev
  2020-01-10  9:31     ` Eli Zaretskii
@ 2020-01-11  0:45     ` Stefan Monnier
  1 sibling, 0 replies; 7+ messages in thread
From: Stefan Monnier @ 2020-01-11  0:45 UTC (permalink / raw)
  To: Alexander Shukaev; +Cc: Eli Zaretskii, emacs-devel

> default value and garbage collecting starts immediately. However, the memory
> consumption of Emacs does not fall back to 500MB, but rather goes down to
> only e.g. 6GB, which afterwards are never ever reclaimed.

As Eli mentioned, this is considered normal and not a leak.
It only becomes a leak when the unused memory held cannot be reused
for anything.

> If I repeat the test, the memory consumption would immediately
> continue to grow off 6GB further as if those 6GB are not reused and
> are somehow stuck holding something that cannot be reclaimed anymore.

This is more serious, OTOH.
It might indeed be symptom of a leak.  Of course, it can also come from
a problem of fragmentation, or a number of other undesirables effects.

Delaying GC (by raising `gc-cons-threshold`) tends to both increase the
time it takes to a perform a GC cycle and also increase fragmentation.
This is why Emacs's default setting errs on the side of GC'ing rather
more often than less often.


        Stefan




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Lost or corrupted `undo-tree' history
  2020-01-08 22:45 Lost or corrupted `undo-tree' history Alexander Shukaev
  2020-01-10  8:07 ` Eli Zaretskii
@ 2020-02-18 17:39 ` Stefan Monnier
  1 sibling, 0 replies; 7+ messages in thread
From: Stefan Monnier @ 2020-02-18 17:39 UTC (permalink / raw)
  To: Alexander Shukaev; +Cc: emacs-devel

> only show after some time whether the issue is truly gone), I believe the
> garbage collector can be temporarily disabled by simply wrapping the body of
> `undo-list-transfer-to-tree' into the following `let' form:
>
> (let ((gc-cons-threshold most-positive-fixnum))
>   ...)

I think I'd be more interested in trying to make the problem *more* frequent so
we can finally track it down.


        Stefan




^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2020-02-18 17:39 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-01-08 22:45 Lost or corrupted `undo-tree' history Alexander Shukaev
2020-01-10  8:07 ` Eli Zaretskii
2020-01-10  9:19   ` Alexander Shukaev
2020-01-10  9:31     ` Eli Zaretskii
2020-01-10 10:27       ` Alexander Shukaev
2020-01-11  0:45     ` Stefan Monnier
2020-02-18 17:39 ` Stefan Monnier

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.