* [PATCH] lisp/files.el and lisp/buf-menu.el
@ 2009-07-16 20:47 Thomas Lord
2009-07-17 3:08 ` Stefan Monnier
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Lord @ 2009-07-16 20:47 UTC (permalink / raw
To: emacs-devel
As earlier explained, I have the case of creating
a buffer with no visited file, yet I would like
to use (normal-mode) to set the mode AS IF the
name of the visited file was a particular string.
It was also pointed out to me that I should make
sure "list-buffers-noselect" puts something helpful
where a file name would usually go.
I have accordingly patched lisp/files.el and lisp/buf-menu.el.
First, I'll just walk through the simple patches.
Then I'll include the patches at the end without
the narrative.
To lisp/files.el:
$ diff -c files.el.~1.1052.~ files.el
*** files.el.~1.1052.~ 2009-06-22 00:02:08.000000000 -0700
--- files.el 2009-07-16 13:21:21.000000000 -0700
***************
*** 2428,2433 ****
--- 2428,2437 ----
"Upper limit on `magic-mode-alist' regexp matches.
Also applies to `magic-fallback-mode-alist'.")
+ (defvar buffer-automode-file-name ()
+ "If not nil, use this rather than `buffer-file-name' for automode.")
+ (make-variable-buffer-local 'buffer-automode-file-name)
+
(defun set-auto-mode (&optional keep-mode-if-same)
"Select major mode appropriate for current buffer.
If that variable is dynamically bound, it overrides
BUFFER-FILE-NAME in SET-AUTO-MODE.
A typical use is:
(let ((automode-file-name my-name-for-mode-purposes))
(normal-mode))
And here is how that works in SET-AUTO-MODE:
***************
*** 2515,2523 ****
(set-auto-mode-0 done keep-mode-if-same)))
;; Next compare the filename against the entries in
auto-mode-alist.
(unless done
! (if buffer-file-name
! (let ((name buffer-file-name)
! (remote-id (file-remote-p buffer-file-name)))
;; Remove remote file name identification.
(when (and (stringp remote-id)
(string-match (regexp-quote remote-id) name))
--- 2519,2527 ----
(set-auto-mode-0 done keep-mode-if-same)))
;; Next compare the filename against the entries in
auto-mode-alist.
(unless done
! (if (or buffer-automode-file-name buffer-file-name)
! (let ((name (or buffer-automode-file-name buffer-file-name))
! (remote-id (and (not buffer-automode-file-name) (file-remote-p
buffer-file-name))))
;; Remove remote file name identification.
(when (and (stringp remote-id)
(string-match (regexp-quote remote-id) name))
Next, I would like to customize the string that
appears in the "file column" of a buffer menu:
$ diff -c buff-menu.el.~1.125.~ buff-menu.el
*** buff-menu.el.~1.125.~ 2009-01-15 08:46:09.000000000 -0800
--- buff-menu.el 2009-07-16 13:29:51.000000000 -0700
***************
*** 755,760 ****
--- 755,764 ----
'mouse-face 'highlight
'keymap Buffer-menu-sort-button-map))
+ (defvar list-buffers-description ()
+ "If not nil, use in place of a file name in a buffer menu.")
+ (make-variable-buffer-local 'list-buffers-description)
+
(defun list-buffers-noselect (&optional files-only buffer-list)
"Create and return a buffer with a list of names of existing
buffers.
The buffer is named `*Buffer List*'.
That new variable works EXACTLY LIKE the existing
variable LIST-BUFFERS-DIRECTORY except that the new
variable has a more general name, has a doc string,
and takes precedence over LIST-BUFFERS-DIRECTORY
It works trivially (in LIST-BUFFERS-NOSELECT):
***************
*** 842,848 ****
;; No visited file. Check local value of
;; list-buffers-directory and, for Info buffers,
;; Info-current-file.
! (cond ((and (boundp 'list-buffers-directory)
list-buffers-directory)
(setq file list-buffers-directory))
((eq major-mode 'Info-mode)
--- 846,855 ----
;; No visited file. Check local value of
;; list-buffers-directory and, for Info buffers,
;; Info-current-file.
! (cond ((and (boundp 'list-buffers-description)
! list-buffers-description)
! (setq file list-buffers-description))
! ((and (boundp 'list-buffers-directory)
list-buffers-directory)
(setq file list-buffers-directory))
((eq major-mode 'Info-mode)
-t
The patches without interruption:
$ diff -c files.el.~1.1052.~ files.el
*** files.el.~1.1052.~ 2009-06-22 00:02:08.000000000 -0700
--- files.el 2009-07-16 13:21:21.000000000 -0700
***************
*** 2428,2433 ****
--- 2428,2437 ----
"Upper limit on `magic-mode-alist' regexp matches.
Also applies to `magic-fallback-mode-alist'.")
+ (defvar buffer-automode-file-name ()
+ "If not nil, use this rather than `buffer-file-name' for automode.")
+ (make-variable-buffer-local 'buffer-automode-file-name)
+
(defun set-auto-mode (&optional keep-mode-if-same)
"Select major mode appropriate for current buffer.
***************
*** 2515,2523 ****
(set-auto-mode-0 done keep-mode-if-same)))
;; Next compare the filename against the entries in
auto-mode-alist.
(unless done
! (if buffer-file-name
! (let ((name buffer-file-name)
! (remote-id (file-remote-p buffer-file-name)))
;; Remove remote file name identification.
(when (and (stringp remote-id)
(string-match (regexp-quote remote-id) name))
--- 2519,2527 ----
(set-auto-mode-0 done keep-mode-if-same)))
;; Next compare the filename against the entries in
auto-mode-alist.
(unless done
! (if (or buffer-automode-file-name buffer-file-name)
! (let ((name (or buffer-automode-file-name buffer-file-name))
! (remote-id (and (not buffer-automode-file-name) (file-remote-p
buffer-file-name))))
;; Remove remote file name identification.
(when (and (stringp remote-id)
(string-match (regexp-quote remote-id) name))
$ diff -c buff-menu.el.~1.125.~ buff-menu.el
*** buff-menu.el.~1.125.~ 2009-01-15 08:46:09.000000000 -0800
--- buff-menu.el 2009-07-16 13:29:51.000000000 -0700
***************
*** 755,760 ****
--- 755,764 ----
'mouse-face 'highlight
'keymap Buffer-menu-sort-button-map))
+ (defvar list-buffers-description ()
+ "If not nil, use in place of a file name in a buffer menu.")
+ (make-variable-buffer-local 'list-buffers-description)
+
(defun list-buffers-noselect (&optional files-only buffer-list)
"Create and return a buffer with a list of names of existing
buffers.
The buffer is named `*Buffer List*'.
***************
*** 842,848 ****
;; No visited file. Check local value of
;; list-buffers-directory and, for Info buffers,
;; Info-current-file.
! (cond ((and (boundp 'list-buffers-directory)
list-buffers-directory)
(setq file list-buffers-directory))
((eq major-mode 'Info-mode)
--- 846,855 ----
;; No visited file. Check local value of
;; list-buffers-directory and, for Info buffers,
;; Info-current-file.
! (cond ((and (boundp 'list-buffers-description)
! list-buffers-description)
! (setq file list-buffers-description))
! ((and (boundp 'list-buffers-directory)
list-buffers-directory)
(setq file list-buffers-directory))
((eq major-mode 'Info-mode)
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] lisp/files.el and lisp/buf-menu.el
2009-07-16 20:47 [PATCH] lisp/files.el and lisp/buf-menu.el Thomas Lord
@ 2009-07-17 3:08 ` Stefan Monnier
2009-07-17 4:56 ` Thomas Lord
0 siblings, 1 reply; 6+ messages in thread
From: Stefan Monnier @ 2009-07-17 3:08 UTC (permalink / raw
To: Thomas Lord; +Cc: emacs-devel
> As earlier explained, I have the case of creating
> a buffer with no visited file, yet I would like
> to use (normal-mode) to set the mode AS IF the
> name of the visited file was a particular string.
You'll probbaly also want to reuse the coding-system auto-detection, and
maybe more.
> It was also pointed out to me that I should make
> sure "list-buffers-noselect" puts something helpful
> where a file name would usually go.
What's the difference between list-buffers-description and list-buffers-directory?
> I have accordingly patched lisp/files.el and lisp/buf-menu.el.
I'm not completely convinced that buffer-automode-file-name is
a good idea. Why not just let-bind buffer-file-name instead?
Also, if let-binding buffer-file-name is not good enough, maybe I'd
rather see a refactoring of the code.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] lisp/files.el and lisp/buf-menu.el
2009-07-17 3:08 ` Stefan Monnier
@ 2009-07-17 4:56 ` Thomas Lord
2009-07-17 15:46 ` Stefan Monnier
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Lord @ 2009-07-17 4:56 UTC (permalink / raw
To: Stefan Monnier; +Cc: emacs-devel
Stefan,
I did initially solve this problem with
(let ((buffer-file-name yaddayadda)) (normal-mode))
I wasn't happy with that because I assume
that the binding of buffer-file-name should
be one of: nil, a local file, a remote file.
I don't know what code distributed with
Emacs or what third party Emacs code would
break under other conditions. That is
why my patch adds buffer-automode-file-name.
LIST-BUFFERS-DESCRIPTION differs from ...-DIRECTORY
by being better named (so people won't
assume it necessarily refers to a "directory")
and with a doc string. I don't know
to what extent third party code assumes that
LIST-BUFFERS-DIRECTORY is, well, a directory
and so I didn't want to overload it.
I'm not clear on what you suggest I do about
coding systems.
-t
On Thu, 2009-07-16 at 23:08 -0400, Stefan Monnier wrote:
> > As earlier explained, I have the case of creating
> > a buffer with no visited file, yet I would like
> > to use (normal-mode) to set the mode AS IF the
> > name of the visited file was a particular string.
>
> You'll probbaly also want to reuse the coding-system auto-detection, and
> maybe more.
>
> > It was also pointed out to me that I should make
> > sure "list-buffers-noselect" puts something helpful
> > where a file name would usually go.
>
> What's the difference between list-buffers-description and list-buffers-directory?
>
> > I have accordingly patched lisp/files.el and lisp/buf-menu.el.
>
> I'm not completely convinced that buffer-automode-file-name is
> a good idea. Why not just let-bind buffer-file-name instead?
> Also, if let-binding buffer-file-name is not good enough, maybe I'd
> rather see a refactoring of the code.
>
>
> Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] lisp/files.el and lisp/buf-menu.el
2009-07-17 4:56 ` Thomas Lord
@ 2009-07-17 15:46 ` Stefan Monnier
2009-07-17 17:56 ` Thomas Lord
0 siblings, 1 reply; 6+ messages in thread
From: Stefan Monnier @ 2009-07-17 15:46 UTC (permalink / raw
To: Thomas Lord; +Cc: emacs-devel
> I did initially solve this problem with
> (let ((buffer-file-name yaddayadda)) (normal-mode))
> I wasn't happy with that because I assume
> that the binding of buffer-file-name should
> be one of: nil, a local file, a remote file.
> I don't know what code distributed with
> Emacs or what third party Emacs code would
> break under other conditions. That is
> why my patch adds buffer-automode-file-name.
As shown in the code I sent a few days ago, PCL-CVS does use such
a let-binding (and uses after-find-file rather than normal-mode), so
I wouldn't worry too much about it.
> LIST-BUFFERS-DESCRIPTION differs from ...-DIRECTORY
> by being better named (so people won't
> assume it necessarily refers to a "directory")
> and with a doc string. I don't know
> to what extent third party code assumes that
> LIST-BUFFERS-DIRECTORY is, well, a directory
> and so I didn't want to overload it.
So the better thing to do would be to suggest renaming
list-buffers-directory to list-buffers-description and adding
a docstring.
> I'm not clear on what you suggest I do about
> coding systems.
I'm just pointing out you may want to reuse more of the code used to
open files, so it also obeys things like the -*- coding -*- tags as well
as file-coding-system-alist.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] lisp/files.el and lisp/buf-menu.el
2009-07-17 15:46 ` Stefan Monnier
@ 2009-07-17 17:56 ` Thomas Lord
2009-07-17 22:22 ` Stefan Monnier
0 siblings, 1 reply; 6+ messages in thread
From: Thomas Lord @ 2009-07-17 17:56 UTC (permalink / raw
To: Stefan Monnier; +Cc: emacs-devel
Stefan,
Thanks.
For buff-menu.el how would you feel about a patch
that:
Declares LIST-FILES-DIRECTORY obsolete.
Declares LIST-FILES-DIRECTORY to be an alias for
LIST-FILES-DESCRIPTION.
Otherwise renames LIST-FILES-DIRECTORY in lisp/*.el lisp/*/*.el
The other one, files.el and the case of BUFFER-FILE-MODE
vs. SET-AUTO-MODE: could we discuss that a little
further?
I get that PCL-CVS gets away with a let-binding
for BUFFER-FILE-MODE but that strikes me as a kludge
and a kludge with the potential to break things.
I think that third party code should be free to
assume that if BUFFER-FILE-MODE is not nil
then it is, as the name implies, the name of
a (potentially remote) file. I'm thinking
about, for example, what someone might put
in a mode hook in their ~/.emacs
At the same time, I'm apparently not the first
person that wants a mechanism to tweak what
SET-AUTO-MODE does by providing an override string
to use against the auto-mode alist. So,
I'm still kind of fond of the files.el patch
although, ultimately, of course, I defer to the
maintainers.
Finally,
> > I'm not clear on what you suggest I do about
> > coding systems.
> I'm just pointing out you may want to reuse more of the code used to
> open files, so it also obeys things like the -*- coding -*- tags as well
> as file-coding-system-alist.
I'll look into it.
-t
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] lisp/files.el and lisp/buf-menu.el
2009-07-17 17:56 ` Thomas Lord
@ 2009-07-17 22:22 ` Stefan Monnier
0 siblings, 0 replies; 6+ messages in thread
From: Stefan Monnier @ 2009-07-17 22:22 UTC (permalink / raw
To: Thomas Lord; +Cc: emacs-devel
> For buff-menu.el how would you feel about a patch that:
> Declares LIST-FILES-DIRECTORY obsolete.
> Declares LIST-FILES-DIRECTORY to be an alias for
> LIST-FILES-DESCRIPTION.
> Otherwise renames LIST-FILES-DIRECTORY in lisp/*.el lisp/*/*.el
It might be OK. I haven't thought about it enough recently, but I know
that list-files-directory is a poor name and the lack of doc has bugged
me when I used it in PCL-CVS, so I come from a favorable background.
I'm not yet sure whether list-files-description is really a name I like
(I'm not sure whether its name should bind it so closely to "list"ing).
> I get that PCL-CVS gets away with a let-binding
> for BUFFER-FILE-MODE but that strikes me as a kludge
> and a kludge with the potential to break things.
Emacs is made of those.
> I think that third party code should be free to assume that if
> BUFFER-FILE-MODE is not nil then it is, as the name implies, the name
> of a (potentially remote) file.
It's already not true for members of archives opened via tar-mode.el
and arc-mode.el.
> At the same time, I'm apparently not the first person that wants
> a mechanism to tweak what SET-AUTO-MODE does by providing an override
> string to use against the auto-mode alist.
I don't understand what you mean.
Stefan
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-07-17 22:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-16 20:47 [PATCH] lisp/files.el and lisp/buf-menu.el Thomas Lord
2009-07-17 3:08 ` Stefan Monnier
2009-07-17 4:56 ` Thomas Lord
2009-07-17 15:46 ` Stefan Monnier
2009-07-17 17:56 ` Thomas Lord
2009-07-17 22:22 ` Stefan Monnier
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.