* how to change the set of agenda org files between custom agenda commands
@ 2008-09-23 15:37 Rainer Stengele
2008-09-23 23:16 ` Dan Griswold
0 siblings, 1 reply; 6+ messages in thread
From: Rainer Stengele @ 2008-09-23 15:37 UTC (permalink / raw)
To: emacs-orgmode
I am struggling to switch the set of used agenda org files between different custom agenda commands.
I tried something like
(setq org-agenda-custom-commands
'(
("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
("ka" tags-todo "CATEGORY=\"ADMIN\"")
("kP" tags-todo "CATEGORY=\"PRIVAT\""
((org-agenda-files (quote ("~/org/PRIVAT/PRIVAT.org")))))
...
or
(setq org-agenda-custom-commands
'(
("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
("ka" tags-todo "CATEGORY=\"ADMIN\"")
("kP" tags-todo "CATEGORY=\"PRIVAT\""
((org-agenda-directory "~/org/PRIVAT")))
...
but am failing miserably. Can someone point me to a solution?
Motivation: in the middle of my worktime I want to be able to look into a completely different (private) set of org files.
I know I could write a elisp function and redefine the org-agenda-custom-commands but I would like to do this in one place.
Rainer
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: how to change the set of agenda org files between custom agenda commands
2008-09-23 15:37 how to change the set of agenda org files between custom agenda commands Rainer Stengele
@ 2008-09-23 23:16 ` Dan Griswold
2008-09-24 21:25 ` Rainer Stengele
0 siblings, 1 reply; 6+ messages in thread
From: Dan Griswold @ 2008-09-23 23:16 UTC (permalink / raw)
To: emacs-orgmode
Rainer Stengele <rainer.stengele@diplan.de> writes:
> I am struggling to switch the set of used agenda org files between
> different custom agenda commands.
>
> I tried something like
>
> (setq org-agenda-custom-commands
> '(
> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
> ((org-agenda-files (quote ("~/org/PRIVAT/PRIVAT.org")))))
Playing with customize I came up with this possibility:
(setq org-agenda-custom-commands
'(
("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
("ka" tags-todo "CATEGORY=\"ADMIN\"")
("kP" tags-todo "CATEGORY=\"PRIVAT\""
((org-agenda-files
'("~/org/PRIVAT/PRIVAT.org"))))))
Will that do it?
Dan
--
--------------
Dan Griswold
Rochester, NY
--------------
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: how to change the set of agenda org files between custom agenda commands
2008-09-23 23:16 ` Dan Griswold
@ 2008-09-24 21:25 ` Rainer Stengele
2008-09-25 2:54 ` Dan Griswold
2008-09-25 3:32 ` Carsten Dominik
0 siblings, 2 replies; 6+ messages in thread
From: Rainer Stengele @ 2008-09-24 21:25 UTC (permalink / raw)
To: Dan Griswold; +Cc: emacs-orgmode
Dan Griswold wrote:
> Rainer Stengele <rainer.stengele@diplan.de> writes:
>
>> I am struggling to switch the set of used agenda org files between
>> different custom agenda commands.
>>
>> I tried something like
>>
>> (setq org-agenda-custom-commands
>> '(
>> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
>> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
>> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
>> ((org-agenda-files (quote ("~/org/PRIVAT/PRIVAT.org")))))
>
> Playing with customize I came up with this possibility:
>
> (setq org-agenda-custom-commands
> '(
> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
> ((org-agenda-files
> '("~/org/PRIVAT/PRIVAT.org"))))))
>
> Will that do it?
>
> Dan
>
Dan, thank you. I somehow does and doesn't.
After using the command I get the "private" entries.
After using another command analogous to this it seems I cannot reset
the org-agenda-files variable. Looks like it only adds files to it?
I played around a lot but could not get it to function as wanted.
Anyway, the syntax is quite complex.
I wonder if some more examples for changing agenda files when executing
custom commands would be helpful.
Anyone else who wants to see Agenden at home from different sets of
agenda files?
Rainer
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: how to change the set of agenda org files between custom agenda commands
2008-09-24 21:25 ` Rainer Stengele
@ 2008-09-25 2:54 ` Dan Griswold
2008-09-25 3:32 ` Carsten Dominik
1 sibling, 0 replies; 6+ messages in thread
From: Dan Griswold @ 2008-09-25 2:54 UTC (permalink / raw)
To: emacs-orgmode
Rainer Stengele <rainer.stengele@diplan.de> writes:
> Dan, thank you. I somehow does and doesn't.
> After using the command I get the "private" entries.
> After using another command analogous to this it seems I cannot reset
> the org-agenda-files variable. Looks like it only adds files to it?
> I played around a lot but could not get it to function as wanted.
>
> Anyway, the syntax is quite complex.
> I wonder if some more examples for changing agenda files when
> executing custom commands would be helpful.
> Anyone else who wants to see Agenden at home from different sets of
> agenda files?
>
> Rainer
Rainer,
I came across the variable org-finalize-agenda-hook, which is "run
just before displaying an agenda buffer."
So, maybe something like this in your configuration will work:
(defun rs-reset-agenda-files ()
"Set org-agenda-files to my default values"
(interactive)
(setq org-agenda-files ; the following are examples, of course
(quote
("~/org/PUBLIK/work1.org"
"~/org/PUBLIK/work2.org"
"~/org/PUBLIK/work3.org"))))
(add-hook 'org-finalize-agenda-hook 'rs-reset-agenda-files)
What I think might then happen is that, after you run agenda custom
command kP, the variable org-agenda-files will be reset to the default
value.
Maybe?
Dan
--
--------------
Dan Griswold
Rochester, NY
--------------
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Re: how to change the set of agenda org files between custom agenda commands
2008-09-24 21:25 ` Rainer Stengele
2008-09-25 2:54 ` Dan Griswold
@ 2008-09-25 3:32 ` Carsten Dominik
2008-09-25 12:00 ` Rainer Stengele
1 sibling, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2008-09-25 3:32 UTC (permalink / raw)
To: Rainer Stengele; +Cc: Dan Griswold, emacs-orgmode
On Sep 24, 2008, at 11:25 PM, Rainer Stengele wrote:
> Dan Griswold wrote:
>> Rainer Stengele <rainer.stengele@diplan.de> writes:
>>> I am struggling to switch the set of used agenda org files between
>>> different custom agenda commands.
>>>
>>> I tried something like
>>>
>>> (setq org-agenda-custom-commands
>>> '(
>>> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
>>> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
>>> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
>>> ((org-agenda-files (quote ("~/org/PRIVAT/PRIVAT.org")))))
>> Playing with customize I came up with this possibility:
>> (setq org-agenda-custom-commands
>> '(
>> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
>> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
>> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
>> ((org-agenda-files
>> '("~/org/PRIVAT/PRIVAT.org"))))))
>> Will that do it?
>> Dan
>
> Dan, thank you. I somehow does and doesn't.
> After using the command I get the "private" entries.
> After using another command analogous to this it seems I cannot
> reset the org-agenda-files variable. Looks like it only adds files
> to it?
> I played around a lot but could not get it to function as wanted.
Hi Rainer, Dan
I just tested this, with
(setq org-agenda-custom-commands
'(("ka" "aaa" alltodo ""
((org-agenda-files
'("~/lib/emacs/work/org-mode/test/a.org"))))
("kb" "bbb" alltodo ""
((org-agenda-files
'("~/lib/emacs/work/org-mode/test/b.org"))))))
with small files a.org and b.org containing just one TODO entry, and
of course my full suite of TODO entries available with `C-c a t'.
And then I do
C-c a t
C-c a a
C-c a b
C-c a t
and it all works just fine, going back end forth between these in any
sequence.....
> Anyway, the syntax is quite complex.
> I wonder if some more examples for changing agenda files when
> executing custom commands would be helpful.
> Anyone else who wants to see Agenden at home from different sets of
> agenda files?
I think a good way is also to keep the list of agenda files in a file,
like
~/.agenda_files_home and ~/.agenda_files_work.
The you can have different sets of files, and switch by making org-
agenda-files
(defun org-my-toggle-agenda-file-set ()
(interactive)
(if (equal org-agenda-files "~/.agenda_files_work")
(setq org-agenda-files "~/.agenda_files_home")
(setq org-agenda-files "~/.agenda_files_work"))
(message "Using %s" org-agenda-files))
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: how to change the set of agenda org files between custom agenda commands
2008-09-25 3:32 ` Carsten Dominik
@ 2008-09-25 12:00 ` Rainer Stengele
0 siblings, 0 replies; 6+ messages in thread
From: Rainer Stengele @ 2008-09-25 12:00 UTC (permalink / raw)
To: Carsten Dominik; +Cc: Dan Griswold, emacs-orgmode
Carsten Dominik wrote:
> On Sep 24, 2008, at 11:25 PM, Rainer Stengele wrote:
>
>> Dan Griswold wrote:
>>> Rainer Stengele <rainer.stengele@diplan.de> writes:
>>>> I am struggling to switch the set of used agenda org files between
>>>> different custom agenda commands.
>>>>
>>>> I tried something like
>>>>
>>>> (setq org-agenda-custom-commands
>>>> '(
>>>> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
>>>> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
>>>> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
>>>> ((org-agenda-files (quote ("~/org/PRIVAT/PRIVAT.org")))))
>>> Playing with customize I came up with this possibility:
>>> (setq org-agenda-custom-commands
>>> '(
>>> ("k" . "Kundenbezogene / Ketegoriebezogene TODOs ...")
>>> ("ka" tags-todo "CATEGORY=\"ADMIN\"")
>>> ("kP" tags-todo "CATEGORY=\"PRIVAT\""
>>> ((org-agenda-files
>>> '("~/org/PRIVAT/PRIVAT.org"))))))
>>> Will that do it?
>>> Dan
>>
>> Dan, thank you. I somehow does and doesn't.
>> After using the command I get the "private" entries.
>> After using another command analogous to this it seems I cannot reset
>> the org-agenda-files variable. Looks like it only adds files to it?
>> I played around a lot but could not get it to function as wanted.
>
> Hi Rainer, Dan
>
> I just tested this, with
>
> (setq org-agenda-custom-commands
> '(("ka" "aaa" alltodo ""
> ((org-agenda-files
> '("~/lib/emacs/work/org-mode/test/a.org"))))
> ("kb" "bbb" alltodo ""
> ((org-agenda-files
> '("~/lib/emacs/work/org-mode/test/b.org"))))))
>
> with small files a.org and b.org containing just one TODO entry, and of
> course my full suite of TODO entries available with `C-c a t'.
>
> And then I do
>
> C-c a t
> C-c a a
> C-c a b
> C-c a t
>
> and it all works just fine, going back end forth between these in any
> sequence.....
>
>> Anyway, the syntax is quite complex.
>> I wonder if some more examples for changing agenda files when
>> executing custom commands would be helpful.
>> Anyone else who wants to see Agenden at home from different sets of
>> agenda files?
>
> I think a good way is also to keep the list of agenda files in a file, like
> ~/.agenda_files_home and ~/.agenda_files_work.
>
> The you can have different sets of files, and switch by making
> org-agenda-files
>
> (defun org-my-toggle-agenda-file-set ()
> (interactive)
> (if (equal org-agenda-files "~/.agenda_files_work")
> (setq org-agenda-files "~/.agenda_files_home")
> (setq org-agenda-files "~/.agenda_files_work"))
> (message "Using %s" org-agenda-files))
>
> - Carsten
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
Hi all,
I found the problem. I used "org-agenda-directory" instead of org-agenda-files.
Not recognising that this variable doesn't seem to exist (did it ever exist?)
I assumed I can use it to indicate the org files folder.
With org-agenda-files everything works perfectly.
I now have about 48 custom commands (partly of course hierarchical) and with
dynamically changing the set of org files I really feel I have control over my todos!
I am very happy with org!
Thank you both!
Rainer
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-09-25 12:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-09-23 15:37 how to change the set of agenda org files between custom agenda commands Rainer Stengele
2008-09-23 23:16 ` Dan Griswold
2008-09-24 21:25 ` Rainer Stengele
2008-09-25 2:54 ` Dan Griswold
2008-09-25 3:32 ` Carsten Dominik
2008-09-25 12:00 ` Rainer Stengele
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.