Re: compile-command customisation

Re: compile-command customisation

[Daniel Wright]

Thien-Thi Nguyen <ttn@glug.org> writes:
>Daniel Wright <daniel.d.wright@gmail.com> writes:
>
>> how it could be done better :)
>
>some standard tips:
>
>(if CONDITION (progn EXP ...))
>=> (when CONDITION EXP ...)
>
>(unless CONDITION (progn EXP ...))
>=> (unless CONDITION EXP ...)
>
>you can lift `file-name-sans-extension', like so:
>
>(... (file-name-sans-extension file)
>... (file-name-sans-extension file) ...)
>=> (let ((fn-noext (file-name-sans-extension file)))
>    (... fn-noext
>     ... fn-noext ...))
>
>generally, these transforms do not change your algorithm,
>so it is only better in the sense that it is more easy to
>read.  improving the algorithm is your sack of joy to haul.

Thanks for the help! It really does make it a lot easier to read. It
seemed necessary to use "let*" so that file-noext gets evaluated
correctly:

...
(let* ((count 0) (file (file-name-nondirectory buffer-file-name))
     (file-noext (file-name-sans-extension file)))
...

After reading the reply from Kevin Rodgers, I'll leave the improvement
of this algorithm: I'm sure there are plenty of others to improve.. ;)

Thanks again!
Daniel

Re: compile-command customisation

[Stefan Monnier]

> Thanks a lot for the tip! It did seem a bit over zealous to hop around
> from file to file. But the way you use "never" makes me think, that it
> is more than just common sense - is there another reason too?

`find-file' may fail in the case where the current window does not allow
switching buffer (e.g. it's a minibuffer window, or a dedicated window).

> The emacs lisp manual (i finally looked at it) suggests copying the
> the contents of the file to an empty buffer (with
> "insert-file-contents"), it seems a good idea in this case - i could
> then just search that. What do you think?

It all depends on whether you expect that the files might already be loaded
in a buffer and whether the user would find it convenient or annoying that
the Makefile file is automatically loaded.


        Stefan

Re: compile-command customisation

[Daniel Wright]

Stefan Monnier wrote:
>>Thanks a lot for the tip! It did seem a bit over zealous to hop around
>>from file to file. But the way you use "never" makes me think, that it
>>is more than just common sense - is there another reason too?
> 
> 
> `find-file' may fail in the case where the current window does not allow
> switching buffer (e.g. it's a minibuffer window, or a dedicated window).
> 
> 
>>The emacs lisp manual (i finally looked at it) suggests copying the
>>the contents of the file to an empty buffer (with
>>"insert-file-contents"), it seems a good idea in this case - i could
>>then just search that. What do you think?
> 
> 
> It all depends on whether you expect that the files might already be loaded
> in a buffer and whether the user would find it convenient or annoying that
> the Makefile file is automatically loaded.
> 
> 
>         Stefan
Thanks again for your help, it's most appreciated.
Daniel.

Re: compile-command customisation

[Daniel Wright]

Kevin Rodgers <ihs_4664@yahoo.com> writes:

> It doesn't work because of the presence of a Makefile, right?  But make
> has many built-in default rules, including rules that allow you to build
> an executable from its C or C++ source.  In fact, there is a similar
> code snippet in compile-command's doc string, and just last week I was
> considering submitting a bug report that the Makefile test is not useful
> in the mode hook.
> 
> Note also that make's default rules are parameterized by macros,
> e.g. CC, CPPFLAGS, CFLAGS, CXXFLAGS, and LDFLAGS, which in turn get
> their default values from your environment.  So all you should really
> need is CC=gcc and CFLAGS="-g -W -Wall", plus this:
> 
> (add-hook 'c-mode-common-hook
>            (lambda ()
>              (set (make-local-variable 'compile-command)
>                   (format "make %s"
>                           (file-name-sans-extension
>                            (file-name-nondirectory buffer-file-name))))))
> I think that less is more.
> --
> Kevin Rodgers

Thanks! This is a much better and more elegant solution. I'm still
unfamiliar with make, but you've really helped my understanding.
All the best,
Daniel.

Re: compile-command customisation

[Daniel Wright]

Stefan Monnier <monnier@iro.umontreal.ca> writes:
>Never call `find-file' from elisp.
>Instead, use (with-current-buffer (find-file-noselect "Makefile") ...).
>
>      Stefan

Thanks a lot for the tip! It did seem a bit over zealous to hop around
from file to file. But the way you use "never" makes me think, that it
is more than just common sense - is there another reason too?

The emacs lisp manual (i finally looked at it) suggests copying the
the contents of the file to an empty buffer (with
"insert-file-contents"), it seems a good idea in this case - i could
then just search that. What do you think?

Thanks again!
Daniel

Re: compile-command customisation

[Stefan Monnier]

> 	      (if (file-exists-p "Makefile")
> 		  (progn
> 		    (find-file "Makefile")

Never call `find-file' from elisp.
Instead, use (with-current-buffer (find-file-noselect "Makefile") ...).


        Stefan

Re: compile-command customisation

[Steinar Børmer]

Stefan Monnier wrote:

| > 	      (if (file-exists-p "Makefile")
| > 		  (progn
| > 		    (find-file "Makefile")
| 
| Never call `find-file' from elisp.
| Instead, use (with-current-buffer (find-file-noselect "Makefile") ...).

I assume the reason is because find-file is meant to be used
interactively?

I use find-file in my .emacs.el, and realized that I need a generic
defun if find-file is not "good".

This is what I've been using:

(global-set-key (kbd "C-<f6>") #'(lambda ()
                                  (interactive)
                                  (find-file "~/.emacs.el")))

Is this "wrong", and why?


I assume something like the following is a good way to avoid find-file,
but it seems overly elaborate:

(defun quick-find (file)
  "Find the file FILE."
  (let ((buffer (with-current-buffer (find-file-noselect file))))
    (switch-to-buffer buffer)))

It also appears to do pretty much the same as find-file itself.

Comments?

-- 
SB

Re: compile-command customisation

[Steinar Børmer]

Stefan Monnier wrote:

| > 	      (if (file-exists-p "Makefile")
| > 		  (progn
| > 		    (find-file "Makefile")
| 
| Never call `find-file' from elisp.
| Instead, use (with-current-buffer (find-file-noselect "Makefile") ...).

I assume the reason is because find-file is meant to be used
interactively?

I use find-file in my .emacs.el, and realized that I need a generic
defun if find-file is not "good".

This is what I've been using:

(global-set-key (kbd "C-<f6>") #'(lambda ()
                                  (interactive)
                                  (find-file "~/.emacs.el")))

Is this "wrong", and why?


I assume something like the following is a good way to avoid find-file,
but it seems overly elaborate:

(defun quick-find (file)
  "Find the file FILE."
  (let ((buffer (find-file-noselect file)))
    (switch-to-buffer buffer)))

It also appears to do pretty much the same as find-file itself.

Comments?

-- 
SB

Re: compile-command customisation

[Stefan Monnier]

> This is what I've been using:

> (global-set-key (kbd "C-<f6>") #'(lambda ()
>                                   (interactive)
>                                   (find-file "~/.emacs.el")))

> Is this "wrong", and why?

No, it's not wrong.  while strictly speaking it's calling find-file from
elisp, it's not what I meant by "calling find-file from elisp".
The difference is that the purpose of your elisp function is to call
find-file, so of course it should do that.

> I assume something like the following is a good way to avoid find-file,
> but it seems overly elaborate:

> (defun quick-find (file)
>   "Find the file FILE."
>   (let ((buffer (find-file-noselect file)))
>     (switch-to-buffer buffer)))

> It also appears to do pretty much the same as find-file itself.

Indeed, it's no better.  Because `switch-to-buffer' should also usually be
avoided (unless it's indeed exactly what you want to do).
See C-h f switch-to-buffer RET for example (or the fact that
switch-to-buffer signals an error if you try to use it in a dedicated
window or in a minibuffer window).


        Stefan

Re: compile-command customisation

[Thien-Thi Nguyen]

Daniel Wright <daniel.d.wright@gmail.com> writes:

> how it could be done better :)

some standard tips:

(if CONDITION (progn EXP ...))
=> (when CONDITION EXP ...)

(unless CONDITION (progn EXP ...))
=> (unless CONDITION EXP ...)

you can lift `file-name-sans-extension', like so:

(... (file-name-sans-extension file)
 ... (file-name-sans-extension file) ...)
=> (let ((fn-noext (file-name-sans-extension file)))
     (... fn-noext
      ... fn-noext ...))

generally, these transforms do not change your algorithm,
so it is only better in the sense that it is more easy to
read.  improving the algorithm is your sack of joy to haul.

thi

Re: compile-command customisation

[Kevin Rodgers]

Daniel Wright wrote:
 > Sorry to flog a dead horse: this subject has been discussed recently.
 > But I found the compile-command customisation so fantastic, it took me
 > to a new level of emacs power, (from the emacs wiki):
 >
 > (add-hook 'c-mode-common-hook
 > 	  (lambda ()
 > 	    (unless (file-exists-p "Makefile")
 > 	      (set (make-local-variable 'compile-command)
 > 		   (let ((file (file-name-nondirectory buffer-file-name)))
 > 		     (concat "gcc -g -Wall -W -o " (file-name-sans-extension file)
 > 			     " " file))))))
 >
 > But let's say you want to write a little test c/c++ program that you
 > don't want to include in your Makefile, but still have in the
 > project's directory (i.e. there is a Makefile there). Then the above
 > version of the function won't work, so I've playing with the following
 > (which searches through the Makefile):

It doesn't work because of the presence of a Makefile, right?  But make
has many built-in default rules, including rules that allow you to build
an executable from its C or C++ source.  In fact, there is a similar
code snippet in compile-command's doc string, and just last week I was
considering submitting a bug report that the Makefile test is not useful
in the mode hook.

Note also that make's default rules are parameterized by macros,
e.g. CC, CPPFLAGS, CFLAGS, CXXFLAGS, and LDFLAGS, which in turn get
their default values from your environment.  So all you should really
need is CC=gcc and CFLAGS="-g -W -Wall", plus this:

(add-hook 'c-mode-common-hook
           (lambda ()
             (set (make-local-variable 'compile-command)
                  (format "make %s"
                          (file-name-sans-extension
                           (file-name-nondirectory buffer-file-name))))))

 > (add-hook 'c-mode-common-hook
 > 	  (lambda ()
 > 	    (let ((count 0) (file (file-name-nondirectory buffer-file-name)))
 > 	      (if (file-exists-p "Makefile")
 > 		  (progn
 > 		    (find-file "Makefile")
 > 		    (while (search-forward (file-name-sans-extension file) nil t count)
 > 		      (setq count (1+ count)))
 > 		    (find-file file)))
 > 	      (unless (> count 1)
 > 		(progn
 > 		  (set (make-local-variable 'compile-command)
 > 		       (concat "gcc -g -Wall -W -o " (file-name-sans-extension file)
 > 			       " " file)))))))
 >
 > I was wondering what you all think. I started with emacs lisp this
 > week, so I don't mind if you tell me how bad it is, as long as you
 > tell us how it could be done better :)

I think that less is more.

-- 
Kevin Rodgers

compile-command customisation

[Daniel Wright]

Hi all,
Sorry to flog a dead horse: this subject has been discussed recently.
But I found the compile-command customisation so fantastic, it took me
to a new level of emacs power, (from the emacs wiki):

(add-hook 'c-mode-common-hook
	  (lambda ()
	    (unless (file-exists-p "Makefile")
	      (set (make-local-variable 'compile-command)
		   (let ((file (file-name-nondirectory buffer-file-name)))
		     (concat "gcc -g -Wall -W -o " (file-name-sans-extension file)
			     " " file))))))

But let's say you want to write a little test c/c++ program that you
don't want to include in your Makefile, but still have in the
project's directory (i.e. there is a Makefile there). Then the above
version of the function won't work, so I've playing with the following
(which searches through the Makefile):

(add-hook 'c-mode-common-hook
	  (lambda ()
	    (let ((count 0) (file (file-name-nondirectory buffer-file-name)))
	      (if (file-exists-p "Makefile")
		  (progn
		    (find-file "Makefile")
		    (while (search-forward (file-name-sans-extension file) nil t count)
		      (setq count (1+ count)))
		    (find-file file)))
	      (unless (> count 1)
		(progn
		  (set (make-local-variable 'compile-command)
		       (concat "gcc -g -Wall -W -o " (file-name-sans-extension file)
			       " " file)))))))

I was wondering what you all think. I started with emacs lisp this
week, so I don't mind if you tell me how bad it is, as long as you
tell us how it could be done better :)

Cheers,
Daniel