* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
@ 2009-02-23 17:01 ` Matthieu Moy
2009-03-08 19:40 ` bug#2449: marked as done (23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term) Emacs bug Tracking System
0 siblings, 1 reply; 10+ messages in thread
From: Matthieu Moy @ 2009-02-23 17:01 UTC (permalink / raw
To: emacs-pretest-bug
Hi,
When one disables transient-mark-mode in an ansi-term (term.el), and
then select a piece of text with the mouse, then the behavior is the
one of transient-mark-mode although it has been disabled.
Steps to reproduce (in emacs -Q for example):
M-x transient-mark-mode RET (to disable it)
M-x ansi-term RET RET
ls (at the shell prompt)
select text in the *ansi-term* buffer with the mouse.
ls
Expected behavior: the selection disapears.
Obtained behavior: the selection follows the cursor, at the prompt.
Emacs22 had this right, this is a regression.
Thanks,
In GNU Emacs 23.0.90.1 (i686-pc-linux-gnu, GTK+ Version 2.8.20)
of 2009-02-23 on bauges
Windowing system distributor `The X.Org Foundation', version 11.0.70101000
configured using `configure '--prefix=/home/moy/local/usr/''
Important settings:
value of $LC_ALL: nil
value of $LC_COLLATE: nil
value of $LC_CTYPE: nil
value of $LC_MESSAGES: nil
value of $LC_MONETARY: nil
value of $LC_NUMERIC: nil
value of $LC_TIME: nil
value of $LANG: en_US.UTF-8
value of $XMODIFIERS: nil
locale-coding-system: utf-8-unix
default-enable-multibyte-characters: t
Major mode: Lisp Interaction
Minor modes in effect:
tooltip-mode: t
tool-bar-mode: t
mouse-wheel-mode: t
menu-bar-mode: t
file-name-shadow-mode: t
global-font-lock-mode: t
font-lock-mode: t
blink-cursor-mode: t
global-auto-composition-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
Recent input:
M-x t e r m <tab> <return> <return> l s <return> M-x
C-g C-c M-x t r a n <tab> i <tab> <return> l s <return>
<down-mouse-1> <mouse-movement> <mouse-movement> <drag-mouse-1>
l s <return> C-g C-g C-g C-c C-g C-x C-g C-g <return>
<up> <down> <return> <down-mouse-1> <mouse-1> l s <return>
l s <return> <down-mouse-1> <mouse-movement> <mouse-movement>
<drag-mouse-1> C-c C-j M-> l s <return> C-c C-k l s
<return> <down-mouse-1> <mouse-movement> <mouse-movement>
<drag-mouse-1> l s <return> C-x b C-c C-b C-x o <help-echo>
<help-echo> <help-echo> <down-mouse-1> <mouse-2> <help-echo>
<down-mouse-1> <mouse-movement> <mouse-movement> <drag-mouse-1>
M-> l s <return> M-x r e p o r t <tab> <return>
Recent messages:
For information about GNU Emacs and the GNU system, type C-h C-a.
Transient-Mark mode disabled
Mark set [2 times]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
@ 2009-03-06 7:00 Xavier Maillard
0 siblings, 0 replies; 10+ messages in thread
From: Xavier Maillard @ 2009-03-06 7:00 UTC (permalink / raw
To: Matthieu Moy, 2449; +Cc: emacs-pretest-bug
Hi,
I could reproduce it here too (accidentaly) and it was confirmed
with emacs -Q.
Regards
Xavier
--
http://www.gnu.org
http://www.april.org
http://www.lolica.org
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
@ 2009-03-07 4:18 Chong Yidong
2009-03-07 4:24 ` Dan Nicolaescu
0 siblings, 1 reply; 10+ messages in thread
From: Chong Yidong @ 2009-03-07 4:18 UTC (permalink / raw
To: Dan Nicolaescu; +Cc: 2449, Matthieu Moy
> M-x transient-mark-mode RET (to disable it)
> M-x ansi-term RET RET
> ls (at the shell prompt)
> select text in the *ansi-term* buffer with the mouse.
> ls
>
> Expected behavior: the selection disapears.
>
> Obtained behavior: the selection follows the cursor, at the prompt.
I think term-send-raw should deactivate the mark. Dan, what do you
think?
*** trunk/lisp/term.el.~1.112.~ 2009-02-19 20:32:53.000000000 -0500
--- trunk/lisp/term.el 2009-03-06 23:14:00.000000000 -0500
***************
*** 1182,1187 ****
--- 1182,1188 ----
"Send the last character typed through the terminal-emulator
without any interpretation."
(interactive)
+ (deactivate-mark)
;; Convert `return' to C-m, etc.
(when (and (symbolp last-input-event)
(get last-input-event 'ascii-character))
Diff finished. Fri Mar 6 23:14:01 2009
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-07 4:18 Chong Yidong
@ 2009-03-07 4:24 ` Dan Nicolaescu
2009-03-08 16:03 ` Chong Yidong
0 siblings, 1 reply; 10+ messages in thread
From: Dan Nicolaescu @ 2009-03-07 4:24 UTC (permalink / raw
To: Chong Yidong; +Cc: 2449, Matthieu Moy
Chong Yidong <cyd@stupidchicken.com> writes:
> > M-x transient-mark-mode RET (to disable it)
> > M-x ansi-term RET RET
> > ls (at the shell prompt)
> > select text in the *ansi-term* buffer with the mouse.
> > ls
> >
> > Expected behavior: the selection disapears.
> >
> > Obtained behavior: the selection follows the cursor, at the prompt.
>
> I think term-send-raw should deactivate the mark. Dan, what do you
> think?
deactivate-mark seems to do nothing when transient-mark-mode is not
active (which is the point of this bug report).
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-07 4:24 ` Dan Nicolaescu
@ 2009-03-08 16:03 ` Chong Yidong
2009-03-08 17:29 ` Matthieu Moy
2009-03-08 18:36 ` Dan Nicolaescu
0 siblings, 2 replies; 10+ messages in thread
From: Chong Yidong @ 2009-03-08 16:03 UTC (permalink / raw
To: Dan Nicolaescu; +Cc: 2449, Matthieu Moy
Dan Nicolaescu <dann@ics.uci.edu> writes:
> deactivate-mark seems to do nothing when transient-mark-mode is not
> active (which is the point of this bug report).
The mark can be activated by dragging the mouse. If transient-mark-mode
is active, it's normally deactivated automatically in the command loop.
However, ansi-term does not use self-insert-command, so this
deactivation is not performed. So the right thing to do, I think, is to
deactivate it manually in term-send-raw.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-08 16:03 ` Chong Yidong
@ 2009-03-08 17:29 ` Matthieu Moy
2009-03-08 18:36 ` Dan Nicolaescu
1 sibling, 0 replies; 10+ messages in thread
From: Matthieu Moy @ 2009-03-08 17:29 UTC (permalink / raw
To: Chong Yidong; +Cc: Dan Nicolaescu, 2449
Chong Yidong <cyd@stupidchicken.com> writes:
> Dan Nicolaescu <dann@ics.uci.edu> writes:
>
>> deactivate-mark seems to do nothing when transient-mark-mode is not
>> active (which is the point of this bug report).
>
> The mark can be activated by dragging the mouse. If transient-mark-mode
> is active, it's normally deactivated automatically in the command loop.
> However, ansi-term does not use self-insert-command, so this
> deactivation is not performed. So the right thing to do, I think, is to
> deactivate it manually in term-send-raw.
Confirmed: the fix works for me.
--
Matthieu
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-08 16:03 ` Chong Yidong
2009-03-08 17:29 ` Matthieu Moy
@ 2009-03-08 18:36 ` Dan Nicolaescu
2009-03-08 18:53 ` Chong Yidong
1 sibling, 1 reply; 10+ messages in thread
From: Dan Nicolaescu @ 2009-03-08 18:36 UTC (permalink / raw
To: Chong Yidong; +Cc: 2449, Matthieu Moy
Chong Yidong <cyd@stupidchicken.com> writes:
> Dan Nicolaescu <dann@ics.uci.edu> writes:
>
> > deactivate-mark seems to do nothing when transient-mark-mode is not
> > active (which is the point of this bug report).
>
> The mark can be activated by dragging the mouse. If transient-mark-mode
> is active, it's normally deactivated automatically in the command loop.
I think we are miscommunicating here. The problem in this case happens
when transient-mark-mode is NOT active.
Before installing a fix, I'd like to understand why a fix is needed.
AFAIR nothing has changed in this respect in term.el from emacs-22.
In emacs-22 transient-mark-mode was off by default, and the problem in
this report did not happen.
Has something changed in the way the transient mark is handled even when
transient-mark-mode is inactive?
> However, ansi-term does not use self-insert-command, so this
> deactivation is not performed. So the right thing to do, I think, is to
> deactivate it manually in term-send-raw.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-08 18:36 ` Dan Nicolaescu
@ 2009-03-08 18:53 ` Chong Yidong
2009-03-08 19:14 ` Dan Nicolaescu
0 siblings, 1 reply; 10+ messages in thread
From: Chong Yidong @ 2009-03-08 18:53 UTC (permalink / raw
To: Dan Nicolaescu; +Cc: 2449, Matthieu Moy
Dan Nicolaescu <dann@ics.uci.edu> writes:
> I think we are miscommunicating here. The problem in this case happens
> when transient-mark-mode is NOT active.
>
> Has something changed in the way the transient mark is handled even when
> transient-mark-mode is inactive?
That's what I'm trying to explain. Mouse selection now uses the
(only. OLDVAL) mechanism implemented part of the shift-selection changes
installed many months ago:
*** If a command sets `transient-mark-mode' to (only . OLDVAL), that
means to activate transient-mark-mode temporarily, until the next
unshifted point motion command or mark deactivation. Afterwards,
reset transient-mark-mode to the value OLDVAL. The values `only' and
`identity', introduced in Emacs 22, are now deprecated.
Mouse-selection is now a little "stickier", and this behavior is good in
most cases. But the way ansi-term is set up, the mark never gets
deactivated. That's why this bug occurs.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
2009-03-08 18:53 ` Chong Yidong
@ 2009-03-08 19:14 ` Dan Nicolaescu
0 siblings, 0 replies; 10+ messages in thread
From: Dan Nicolaescu @ 2009-03-08 19:14 UTC (permalink / raw
To: Chong Yidong; +Cc: 2449, Matthieu Moy
Chong Yidong <cyd@stupidchicken.com> writes:
> Dan Nicolaescu <dann@ics.uci.edu> writes:
>
> > I think we are miscommunicating here. The problem in this case happens
> > when transient-mark-mode is NOT active.
> >
> > Has something changed in the way the transient mark is handled even when
> > transient-mark-mode is inactive?
>
> That's what I'm trying to explain. Mouse selection now uses the
> (only. OLDVAL) mechanism implemented part of the shift-selection changes
> installed many months ago:
>
> *** If a command sets `transient-mark-mode' to (only . OLDVAL), that
> means to activate transient-mark-mode temporarily, until the next
> unshifted point motion command or mark deactivation. Afterwards,
> reset transient-mark-mode to the value OLDVAL. The values `only' and
> `identity', introduced in Emacs 22, are now deprecated.
>
> Mouse-selection is now a little "stickier", and this behavior is good in
> most cases. But the way ansi-term is set up, the mark never gets
> deactivated. That's why this bug occurs.
Thanks, please install your change.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#2449: marked as done (23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term)
2009-02-23 17:01 ` bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term Matthieu Moy
@ 2009-03-08 19:40 ` Emacs bug Tracking System
0 siblings, 0 replies; 10+ messages in thread
From: Emacs bug Tracking System @ 2009-03-08 19:40 UTC (permalink / raw
To: Chong Yidong
[-- Attachment #1: Type: text/plain, Size: 934 bytes --]
Your message dated Sun, 08 Mar 2009 15:33:52 -0400
with message-id <87prgrollr.fsf@cyd.mit.edu>
and subject line Re: bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
has caused the Emacs bug report #2449,
regarding 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com
immediately.)
--
2449: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=2449
Emacs Bug Tracking System
Contact owner@emacsbugs.donarmstrong.com with problems
[-- Attachment #2: Type: message/rfc822, Size: 4994 bytes --]
From: Matthieu Moy <Matthieu.Moy@imag.fr>
To: emacs-pretest-bug@gnu.org
Subject: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
Date: Mon, 23 Feb 2009 18:01:43 +0100
Message-ID: <E1LbeBb-00079w-EW@bauges.imag.fr>
Hi,
When one disables transient-mark-mode in an ansi-term (term.el), and
then select a piece of text with the mouse, then the behavior is the
one of transient-mark-mode although it has been disabled.
Steps to reproduce (in emacs -Q for example):
M-x transient-mark-mode RET (to disable it)
M-x ansi-term RET RET
ls (at the shell prompt)
select text in the *ansi-term* buffer with the mouse.
ls
Expected behavior: the selection disapears.
Obtained behavior: the selection follows the cursor, at the prompt.
Emacs22 had this right, this is a regression.
Thanks,
In GNU Emacs 23.0.90.1 (i686-pc-linux-gnu, GTK+ Version 2.8.20)
of 2009-02-23 on bauges
Windowing system distributor `The X.Org Foundation', version 11.0.70101000
configured using `configure '--prefix=/home/moy/local/usr/''
Important settings:
value of $LC_ALL: nil
value of $LC_COLLATE: nil
value of $LC_CTYPE: nil
value of $LC_MESSAGES: nil
value of $LC_MONETARY: nil
value of $LC_NUMERIC: nil
value of $LC_TIME: nil
value of $LANG: en_US.UTF-8
value of $XMODIFIERS: nil
locale-coding-system: utf-8-unix
default-enable-multibyte-characters: t
Major mode: Lisp Interaction
Minor modes in effect:
tooltip-mode: t
tool-bar-mode: t
mouse-wheel-mode: t
menu-bar-mode: t
file-name-shadow-mode: t
global-font-lock-mode: t
font-lock-mode: t
blink-cursor-mode: t
global-auto-composition-mode: t
auto-composition-mode: t
auto-encryption-mode: t
auto-compression-mode: t
line-number-mode: t
Recent input:
M-x t e r m <tab> <return> <return> l s <return> M-x
C-g C-c M-x t r a n <tab> i <tab> <return> l s <return>
<down-mouse-1> <mouse-movement> <mouse-movement> <drag-mouse-1>
l s <return> C-g C-g C-g C-c C-g C-x C-g C-g <return>
<up> <down> <return> <down-mouse-1> <mouse-1> l s <return>
l s <return> <down-mouse-1> <mouse-movement> <mouse-movement>
<drag-mouse-1> C-c C-j M-> l s <return> C-c C-k l s
<return> <down-mouse-1> <mouse-movement> <mouse-movement>
<drag-mouse-1> l s <return> C-x b C-c C-b C-x o <help-echo>
<help-echo> <help-echo> <down-mouse-1> <mouse-2> <help-echo>
<down-mouse-1> <mouse-movement> <mouse-movement> <drag-mouse-1>
M-> l s <return> M-x r e p o r t <tab> <return>
Recent messages:
For information about GNU Emacs and the GNU system, type C-h C-a.
Transient-Mark mode disabled
Mark set [2 times]
[-- Attachment #3: Type: message/rfc822, Size: 1861 bytes --]
From: Chong Yidong <cyd@stupidchicken.com>
To: Dan Nicolaescu <dann@ics.uci.edu>
Cc: 2449-done@emacsbugs.donarmstrong.com, Matthieu Moy <Matthieu.Moy@imag.fr>
Subject: Re: bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term
Date: Sun, 08 Mar 2009 15:33:52 -0400
Message-ID: <87prgrollr.fsf@cyd.mit.edu>
Dan Nicolaescu <dann@ics.uci.edu> writes:
> > Mouse-selection is now a little "stickier", and this behavior is
> > good in most cases. But the way ansi-term is set up, the mark
> > never gets deactivated. That's why this bug occurs.
>
> Thanks, please install your change.
Done.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-03-08 19:40 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <87prgrollr.fsf@cyd.mit.edu>
2009-02-23 17:01 ` bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term Matthieu Moy
2009-03-08 19:40 ` bug#2449: marked as done (23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term) Emacs bug Tracking System
2009-03-06 7:00 bug#2449: 23.0.90; Disabling transient-mark-mode doesn't work well in ansi-term Xavier Maillard
-- strict thread matches above, loose matches on Subject: below --
2009-03-07 4:18 Chong Yidong
2009-03-07 4:24 ` Dan Nicolaescu
2009-03-08 16:03 ` Chong Yidong
2009-03-08 17:29 ` Matthieu Moy
2009-03-08 18:36 ` Dan Nicolaescu
2009-03-08 18:53 ` Chong Yidong
2009-03-08 19:14 ` Dan Nicolaescu
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.