all messages for Emacs-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* I miss ange-ftp ($#@!Tramp)
@ 2002-11-25 22:23 Clay Jones
  2002-11-26  7:34 ` Kai Großjohann
  2002-11-27  7:35 ` Richard Stallman
  0 siblings, 2 replies; 9+ messages in thread
From: Clay Jones @ 2002-11-25 22:23 UTC (permalink / raw)


Hello,

I work in a development environment which does not support secure 
copying via any of tramp's protocols.  I also do not have decision 
making power for implementing these protocols.  I have the default 
setting for tramp set to ange-ftp "(setq tramp-default-method "ftp")" 
in my .emacs file, but I routinely receive errors like:

Wrong type argument: number-or-marker-p, nil

when trying to open/save files.  I've spent a lot of time just trying 
to get back to an environment where I can open and save files remotely 
via FTP.  Any suggestions?

Thanks,

clay

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-25 22:23 I miss ange-ftp ($#@!Tramp) Clay Jones
@ 2002-11-26  7:34 ` Kai Großjohann
  2002-11-26 12:50   ` Robert J. Chassell
                     ` (2 more replies)
  2002-11-27  7:35 ` Richard Stallman
  1 sibling, 3 replies; 9+ messages in thread
From: Kai Großjohann @ 2002-11-26  7:34 UTC (permalink / raw)


Clay Jones <clay@clay-jones.com> writes:

> I work in a development environment which does not support secure
> copying via any of tramp's protocols.  I also do not have decision
> making power for implementing these protocols.  I have the default
> setting for tramp set to ange-ftp "(setq tramp-default-method "ftp")"
> in my .emacs file, but I routinely receive errors like:
>
> Wrong type argument: number-or-marker-p, nil
>
> when trying to open/save files.  I've spent a lot of time just trying
> to get back to an environment where I can open and save files remotely
> via FTP.  Any suggestions?

Oh, boy, this is bad.  I got similar reports previously but didn't
spend too much time on them because I thought it's not Tramp at
fault.  But let me try to change this.

First of all, getting back to Ange-FTP involves setting
file-name-handler-alist to the right value.  The right line is still
in ange-ftp.el, only commented out.  So you want to remove the Tramp
entries from file-name-handler-alist and put in the Ange-FTP entries
instead.

Secondly, could you produce a backtrace (loading the *.el files
instead of the *.elc files to avoid bytecode)?  Maybe I can see this
time what's going wrong.

kai
-- 
~/.signature is: umop ap!sdn    (Frank Nobis)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26  7:34 ` Kai Großjohann
@ 2002-11-26 12:50   ` Robert J. Chassell
  2002-11-26 13:03   ` Robert J. Chassell
  2002-11-26 22:22   ` Michael Albinus
  2 siblings, 0 replies; 9+ messages in thread
From: Robert J. Chassell @ 2002-11-26 12:50 UTC (permalink / raw)
  Cc: emacs-devel

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 7695 bytes --]

I was able to visit and also save a remote file using ange-ftp, but I
had to get out of the debugger first and then find the buried file.

Using today's CVS snapshot, Tue, 2002 Nov 26  11:49 UTC
GNU Emacs 21.3.50.48 (i686-pc-linux-gnu, X toolkit)
started with

     /usr/local/bin/emacs -q --no-site-file --eval '(blink-cursor-mode 0)'

First, I evaluated all the following:

    (progn
      (require 'tramp)
      (setq tramp-verbose 10)
      (setq tramp-debug-buffer t)
      (setq tramp-default-method "smx")
      ;; when running `emacs -q -l ... ' need to set this
      (custom-set-variables '(shell-prompt-pattern "^[^#$%
    ]*[#$%>] *")))

     ;; [need passive mode for ftp with firewall]
    (setq ange-ftp-try-passive-mode t)

    ;; [set ange-ftp-default-user for ange-ftp]
    (custom-set-variables '(ange-ftp-default-user "ftp@gnu.org"))


    ;;; from emacs/lisp/net/ange-ftp.el

    ;;; This regexp takes care of real ange-ftp file names (with a slash
    ;;; and colon).
    ;;; Don't allow the host name to end in a period--some systems use /.:
    ;;;###autoload
    (or (assoc "^/[^/:]*[^/:.]:" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*[^/:.]:" . ange-ftp-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component,
    ;;; for the sake of hostname completion.
    ;;;###autoload
    (or (assoc "^/[^/:]*\\'" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*\\'" . ange-ftp-completion-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component
    ;;; on Windows, for the sake of hostname completion.
    ;;; NB. Do not mark this as autoload, because it is very common to
    ;;; do completions in the root directory of drives on Windows.
    (and (memq system-type '(ms-dos windows-nt))
         (or (assoc "^[a-zA-Z]:/[^/:]*\\'" file-name-handler-alist)
             (setq file-name-handler-alist
                   (cons '("^[a-zA-Z]:/[^/:]*\\'" .
                           ange-ftp-completion-hook-function)
                         file-name-handler-alist))))


Then I visited a file with a command like this (I changed the name of
the user and the destination):

    (find-file "/user@foo.net:~user/public_html/links.html" nil)


This threw me into the debugger:


Debugger entered--Lisp error: (error "Method `smx' didn't specify a connection function")
  signal(error ("Method `smx' didn't specify a connection function"))
  error("Method `%s' didn't specify a connection function" "smx")
  tramp-get-connection-function(nil "smx" "user" "foo.net")
  tramp-maybe-open-connection(nil nil "user" "foo.net")
  tramp-get-file-exists-command(nil nil "user" "foo.net")
  tramp-handle-file-exists-p(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  tramp-handle-file-attributes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  tramp-handle-file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(tramp-handle-file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  byte-code("Ã \x18ÄÅ	A\n\"*‡" [save-match-data-internal fn args match-data ((set-match-data save-match-data-internal)) apply] 3)
  tramp-file-name-handler(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  ange-ftp-run-real-handler(file-modes (#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil)))
  ange-ftp-hook-function(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  after-find-file(nil t)
  find-file-noselect-1(#<buffer links.html> #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) nil nil #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) (1 -1))
  find-file-noselect("/user@foo.net:~user/public_html/links.html" nil nil nil)
  find-file("/user@foo.net:~user/public_html/links.html" nil)
  eval((find-file "/user@foo.net:~user/public_html/links.html" nil))
  eval-last-sexp-1(nil)
  eval-last-sexp(nil)
  call-interactively(eval-last-sexp)



Also, the  *ftp user@foo.net*  buffer showed this:


ftp> open foo.net
Connected to foo.net.
220 uno.foo.net FTP server (Version wu-2.6.2(1) Fri Feb 22 04:09:00 EST 2002) ready.
user "user" Turtle Power!
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
ftp> 331 Password required for user.
230 User user logged in.
ftp> hash
Hash mark printing on (1024 bytes/hash mark).
ftp> pwd
257 "/home/user" is current directory.
ftp> passive on
Passive mode on.
ftp> get ~user /dev/null
227 Entering Passive Mode (209,213,0,60,238,166)
550 /home/user: not a plain file.
ftp> cd /home/user/public_html/links.html/
550 /home/user/public_html/links.html/: Not a directory.
ftp> cd /home/user/public_html/links.html/
550 /home/user/public_html/links.html/: Not a directory.
ftp> cd /home/user/public_html/
250 CWD command successful.
ftp> ls -al /tmp/ange-ftp28849Dge
227 Entering Passive Mode (209,213,0,60,203,199)
150 Opening ASCII mode data connection for /bin/ls.

226 Transfer complete.
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> type binary
200 Type set to I.
ftp> get /home/user/public_html/links.html /tmp/ange-ftp28849Qqk
227 Entering Passive Mode (209,213,0,60,5,174)
150 Opening BINARY mode data connection for /home/user/public_html/links.html (11994 bytes).

226 Transfer complete.
11994 bytes received in 1.7 seconds (6.7 Kbytes/s)
ftp> type ascii
200 Type set to A.
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> quote mdtm /home/user/public_html/links.html
213 20021126123133
ftp> 


*** ==> However, the visited file was in a buffer -- albeit buried --
        and I was able to modify the visited remote file and save it.

-- 
    Robert J. Chassell                         Rattlesnake Enterprises
    http://www.rattlesnake.com                  GnuPG Key ID: 004B4AC8
    http://www.teak.cc                             bob@rattlesnake.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26  7:34 ` Kai Großjohann
  2002-11-26 12:50   ` Robert J. Chassell
@ 2002-11-26 13:03   ` Robert J. Chassell
  2002-11-26 16:16     ` Kai Großjohann
  2002-11-26 22:22   ` Michael Albinus
  2 siblings, 1 reply; 9+ messages in thread
From: Robert J. Chassell @ 2002-11-26 13:03 UTC (permalink / raw)
  Cc: emacs-devel

Oops!  My apologies, I forgot to load the the *.el files instead of the
*.elc files to avoid bytecode.  

Here is a new bug report, from a new instance of Emacs, with the *.el
files loaded, and with a copy of the new debugger log and of the new
*ftp emrc@bcn.net* buffer.  The results were the same as before:


I was able to visit and also save a remote file using ange-ftp, but I
had to get out of the debugger first and then find the buried file.

Using today's CVS snapshot, Tue, 2002 Nov 26  11:49 UTC
GNU Emacs 21.3.50.48 (i686-pc-linux-gnu, X toolkit)
started with

     /usr/local/bin/emacs -q --no-site-file --eval '(blink-cursor-mode 0)'

First, I evaluated all the following:

    (progn
      (require 'tramp)
      (setq tramp-verbose 10)
      (setq tramp-debug-buffer t)
      (setq tramp-default-method "smx")
      ;; when running `emacs -q -l ... ' need to set this
      (custom-set-variables '(shell-prompt-pattern "^[^#$%
    ]*[#$%>] *")))

    ;;; load the *.el files instead of the *.elc files to avoid bytecode
    (progn
      (load-file "/usr/local/share/emacs/21.3.50/lisp/comint.el")
      (load-file "/usr/local/share/emacs/21.3.50/lisp/emacs-lisp/cl.el")
      (load-file "/usr/local/src/emacs/lisp/net/ange-ftp.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp-uu.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp-vc.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp.el"))

     ;; [need passive mode for ftp with firewall]
    (setq ange-ftp-try-passive-mode t)

    ;; [set ange-ftp-default-user for ange-ftp]
    (custom-set-variables '(ange-ftp-default-user "ftp@gnu.org"))


    ;;; from emacs/lisp/net/ange-ftp.el

    ;;; This regexp takes care of real ange-ftp file names (with a slash
    ;;; and colon).
    ;;; Don't allow the host name to end in a period--some systems use /.:
    ;;;###autoload
    (or (assoc "^/[^/:]*[^/:.]:" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*[^/:.]:" . ange-ftp-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component,
    ;;; for the sake of hostname completion.
    ;;;###autoload
    (or (assoc "^/[^/:]*\\'" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*\\'" . ange-ftp-completion-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component
    ;;; on Windows, for the sake of hostname completion.
    ;;; NB. Do not mark this as autoload, because it is very common to
    ;;; do completions in the root directory of drives on Windows.
    (and (memq system-type '(ms-dos windows-nt))
         (or (assoc "^[a-zA-Z]:/[^/:]*\\'" file-name-handler-alist)
             (setq file-name-handler-alist
                   (cons '("^[a-zA-Z]:/[^/:]*\\'" .
                           ange-ftp-completion-hook-function)
                         file-name-handler-alist))))


Then I visited a file with a command like this (I changed the name of
the user and the destination):

    (find-file "/user@foo.net:~user/public_html/links.html" nil)


This threw me into the debugger:



Debugger entered--Lisp error: (error "Method `smx' didn't specify a connection function")
  signal(error ("Method `smx' didn't specify a connection function"))
  error("Method `%s' didn't specify a connection function" "smx")
  (or (assoc (quote tramp-connection-function) (assoc ... tramp-methods)) (error "Method `%s' didn't specify a connection function" (or multi-method method)))
  (second (or (assoc ... ...) (error "Method `%s' didn't specify a connection function" ...)))
  tramp-get-connection-function(nil "smx" "emrc" "bcn.net")
  (funcall (tramp-get-connection-function multi-method (tramp-find-method multi-method method user host) user host) multi-method method user host)
  (if (and p (processp p) (memq ... ...)) nil (when (and p ...) (delete-process p)) (funcall (tramp-get-connection-function multi-method ... user host) multi-method method user host))
  (unless (and p (processp p) (memq ... ...)) (when (and p ...) (delete-process p)) (funcall (tramp-get-connection-function multi-method ... user host) multi-method method user host))
  (let ((p ...) last-cmd-time) (save-excursion (set-buffer ...) (when ... ... ... ...)) (unless (and p ... ...) (when ... ...) (funcall ... multi-method method user host)))
  tramp-maybe-open-connection(nil nil "emrc" "bcn.net")
  (save-excursion (tramp-maybe-open-connection multi-method method user host) (set-buffer (tramp-get-buffer multi-method method user host)) tramp-file-exists-command)
  tramp-get-file-exists-command(nil nil "emrc" "bcn.net")
  (format (tramp-get-file-exists-command multi-method method user host) (tramp-shell-quote-argument path))
  (tramp-send-command-and-check multi-method method user host (format (tramp-get-file-exists-command multi-method method user host) (tramp-shell-quote-argument path)))
  (zerop (tramp-send-command-and-check multi-method method user host (format ... ...)))
  (save-excursion (zerop (tramp-send-command-and-check multi-method method user host ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (save-excursion (zerop ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (save-excursion (zerop ...)))
  tramp-handle-file-exists-p(#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (if (tramp-handle-file-exists-p filename) (progn (save-excursion ...)))
  (when (tramp-handle-file-exists-p filename) (save-excursion (if ... ... ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (tramp-handle-file-exists-p filename) (save-excursion ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (tramp-handle-file-exists-p filename) (save-excursion ...)))
  (let (result) (with-parsed-tramp-file-name filename nil (when ... ...) (when ... ...)) result)
  tramp-handle-file-attributes(#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (nth 8 (tramp-handle-file-attributes filename))
  (tramp-mode-string-to-int (nth 8 (tramp-handle-file-attributes filename)))
  (progn (tramp-mode-string-to-int (nth 8 ...)))
  (if (file-exists-p filename) (progn (tramp-mode-string-to-int ...)))
  (when (file-exists-p filename) (tramp-mode-string-to-int (nth 8 ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (file-exists-p filename) (tramp-mode-string-to-int ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (file-exists-p filename) (tramp-mode-string-to-int ...)))
  tramp-handle-file-modes(#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(tramp-handle-file-modes #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (progn (apply (cdr fn) args))
  (unwind-protect (progn (apply ... args)) (set-match-data save-match-data-internal))
  (let ((save-match-data-internal ...)) (unwind-protect (progn ...) (set-match-data save-match-data-internal)))
  (save-match-data (apply (cdr fn) args))
  (catch (quote tramp-forward-to-ange-ftp) (save-match-data (apply ... args)))
  (if fn (catch (quote tramp-forward-to-ange-ftp) (save-match-data ...)) (tramp-run-real-handler operation args))
  (let ((fn ...)) (if fn (catch ... ...) (tramp-run-real-handler operation args)))
  tramp-file-name-handler(file-modes #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(file-modes #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (let ((inhibit-file-name-handlers ...) (inhibit-file-name-operation operation)) (apply operation args))
  ange-ftp-run-real-handler(file-modes (#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil)))
  (if fn (save-match-data (apply fn args)) (ange-ftp-run-real-handler operation args))
  (let ((fn ...)) (if fn (save-match-data ...) (ange-ftp-run-real-handler operation args)))
  ange-ftp-hook-function(file-modes #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  after-find-file(nil t)
  find-file-noselect-1(#<buffer links.html> #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) nil nil #("/emrc@bcn.net:/home/emrc/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) (1 -1))
  find-file-noselect("/emrc@bcn.net:~emrc/public_html/links.html" nil nil nil)
  find-file("/emrc@bcn.net:~emrc/public_html/links.html" nil)
  eval((find-file "/emrc@bcn.net:~emrc/public_html/links.html" nil))
  eval-last-sexp-1(nil)
  eval-last-sexp(nil)
  call-interactively(eval-last-sexp)


Also, the  *ftp user@foo.net*  buffer showed this:


ftp> open bcn.net
Connected to bcn.net.
220 uno.bcn.net FTP server (Version wu-2.6.2(1) Fri Feb 22 04:09:00 EST 2002) ready.
user "emrc" Turtle Power!
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
ftp> 331 Password required for emrc.
230 User emrc logged in.
ftp> hash
Hash mark printing on (1024 bytes/hash mark).
ftp> pwd
257 "/home/emrc" is current directory.
ftp> passive on
Passive mode on.
ftp> get ~emrc /dev/null
227 Entering Passive Mode (209,213,0,60,141,214)
550 /home/emrc: not a plain file.
ftp> cd /home/emrc/public_html/links.html/
550 /home/emrc/public_html/links.html/: Not a directory.
ftp> cd /home/emrc/public_html/links.html/
550 /home/emrc/public_html/links.html/: Not a directory.
ftp> cd /home/emrc/public_html/
250 CWD command successful.
ftp> ls -al /tmp/ange-ftp28936uye
227 Entering Passive Mode (209,213,0,60,234,100)
150 Opening ASCII mode data connection for /bin/ls.

226 Transfer complete.
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> type binary
200 Type set to I.
ftp> get /home/emrc/public_html/links.html /tmp/ange-ftp2893678k
227 Entering Passive Mode (209,213,0,60,36,49)
150 Opening BINARY mode data connection for /home/emrc/public_html/links.html (11994 bytes).

226 Transfer complete.
11994 bytes received in 1.8 seconds (6.5 Kbytes/s)
ftp> type ascii
200 Type set to A.
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> quote mdtm /home/emrc/public_html/links.html
213 20021126123916
ftp> 

*** ==> However, the visited file was in a buffer -- albeit buried --
        and I was able to modify the visited remote file and save it.

-- 
    Robert J. Chassell                         Rattlesnake Enterprises
    http://www.rattlesnake.com                  GnuPG Key ID: 004B4AC8
    http://www.teak.cc                             bob@rattlesnake.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26 13:03   ` Robert J. Chassell
@ 2002-11-26 16:16     ` Kai Großjohann
  2002-11-26 16:44       ` Robert J. Chassell
  0 siblings, 1 reply; 9+ messages in thread
From: Kai Großjohann @ 2002-11-26 16:16 UTC (permalink / raw)


"Robert J. Chassell" <bob@rattlesnake.com> writes:

>       (setq tramp-default-method "smx")

More recent versions of Tramp use a different set of methods.
Maybe the error message should have said "method smx unknown" or
something like that.

I think you want the "ssh" method which auto-detects whether
mimencode or uuencode should be used.

Or maybe you want "sshx" which executes "ssh ... -e none -t -t /bin/sh"
instead of "ssh ... -e none".

Does this help/work?

kai
-- 
~/.signature is: umop ap!sdn    (Frank Nobis)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26 16:16     ` Kai Großjohann
@ 2002-11-26 16:44       ` Robert J. Chassell
  2002-11-27  9:15         ` Kai Großjohann
  0 siblings, 1 reply; 9+ messages in thread
From: Robert J. Chassell @ 2002-11-26 16:44 UTC (permalink / raw)
  Cc: emacs-devel

    >       (setq tramp-default-method "smx")

    More recent versions of Tramp use a different set of methods.
    ... 
    Or maybe you want "sshx" which executes "ssh ... -e none -t -t /bin/sh"
    instead of "ssh ... -e none".

I tried sshx and I was able to visit and also (I think) save that
remote file using ange-ftp, but the visited file was in a buried
buffer, in fundamental mode, and ...

  * the *Backtrace* buffer says:

        Debugger entered--Lisp error: (error "Login failed")

    [and more which I list below]

  * the  *ftp user@foo.net*  buffer says:

        ftp> open foo.net
        Connected to foo.net.

    [and more which I list below]

  * the  *tramp/nil user@foo.net* says in toto:

        31223: ssh: connect to address 209.213.0.60 port 22: Connection refused

        Process *tramp/nil user@foo.net* exited abnormally with code 1

Also, I just tried
    (setq tramp-default-method "ssh")
in a new instance of Emacs and it looks like tramp generated the same
problems.  (I won't include those new error messages here, since I
they look similar on a quick glance to the one's here.)


Using today's CVS snapshot, Tue, 2002 Nov 26  11:49 UTC
GNU Emacs 21.3.50.48 (i686-pc-linux-gnu, X toolkit)
started with

     /usr/local/bin/emacs -q --no-site-file --eval '(blink-cursor-mode 0)'

First, I evaluated all the following:

    (progn
      (require 'tramp)
      (setq tramp-verbose 10)
      (setq tramp-debug-buffer t)
      (setq tramp-default-method "sshx")
      ;; when running `emacs -q -l ... ' need to set this
      (custom-set-variables '(shell-prompt-pattern "^[^#$%
    ]*[#$%>] *")))

    ;;; load the *.el files instead of the *.elc files to avoid bytecode
    (progn
      (load-file "/usr/local/share/emacs/21.3.50/lisp/comint.el")
      (load-file "/usr/local/share/emacs/21.3.50/lisp/emacs-lisp/cl.el")
      (load-file "/usr/local/src/emacs/lisp/net/ange-ftp.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp-uu.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp-vc.el")
      (load-file "/usr/local/src/emacs/lisp/net/tramp.el"))

     ;; [need passive mode for ftp with firewall]
    (setq ange-ftp-try-passive-mode t)

    ;; [set ange-ftp-default-user for ange-ftp]
    (custom-set-variables '(ange-ftp-default-user "ftp@gnu.org"))


    ;;; from emacs/lisp/net/ange-ftp.el

    ;;; This regexp takes care of real ange-ftp file names (with a slash
    ;;; and colon).
    ;;; Don't allow the host name to end in a period--some systems use /.:
    ;;;###autoload
    (or (assoc "^/[^/:]*[^/:.]:" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*[^/:.]:" . ange-ftp-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component,
    ;;; for the sake of hostname completion.
    ;;;###autoload
    (or (assoc "^/[^/:]*\\'" file-name-handler-alist)
        (setq file-name-handler-alist
              (cons '("^/[^/:]*\\'" . ange-ftp-completion-hook-function)
                    file-name-handler-alist)))

    ;;; This regexp recognizes absolute filenames with only one component
    ;;; on Windows, for the sake of hostname completion.
    ;;; NB. Do not mark this as autoload, because it is very common to
    ;;; do completions in the root directory of drives on Windows.
    (and (memq system-type '(ms-dos windows-nt))
         (or (assoc "^[a-zA-Z]:/[^/:]*\\'" file-name-handler-alist)
             (setq file-name-handler-alist
                   (cons '("^[a-zA-Z]:/[^/:]*\\'" .
                           ange-ftp-completion-hook-function)
                         file-name-handler-alist))))


Then I visited a file with a command like this (I changed the name of
the user and the destination):

    (find-file "/user@foo.net:~user/public_html/links.html" nil)




The *Backtrace* buffer says, in toto:



Debugger entered--Lisp error: (error "Login failed")
  signal(error ("Login failed"))
  error("Login failed")
  (if (eq exit (quote ok)) nil (error "Login failed"))
  (unless (eq exit (quote ok)) (error "Login failed"))
  (let (exit) (while (not exit) (tramp-message 9 "Waiting for prompts from remote shell") (setq exit ...)) (unless (eq exit ...) (error "Login failed")))
  tramp-process-actions(#<process *tramp/nil user@foo.net*> nil nil "user" "foo.net" ((tramp-password-prompt-regexp tramp-action-password) (tramp-login-prompt-regexp tramp-action-login) (shell-prompt-pattern tramp-action-succeed) (tramp-shell-prompt-pattern tramp-action-succeed) (tramp-wrong-passwd-regexp tramp-action-permission-denied) (tramp-yesno-prompt-regexp tramp-action-yesno) (tramp-yn-prompt-regexp tramp-action-yn) (tramp-terminal-prompt-regexp tramp-action-terminal)))
  (let* ((default-directory ...) (coding-system-for-read ...) (p ...) (found nil)) (process-kill-without-query p) (set-buffer buf) (tramp-process-actions p multi-method method user host tramp-actions-before-shell) (tramp-message 7 "Initializing remote shell") (tramp-open-connection-setup-interactive-shell p multi-method method user host) (tramp-post-connection multi-method method user host))
  (let ((process-environment ...) (bufnam ...) (buf ...) (rsh-program ...) (rsh-args ...)) (when (string-match "\\([^#]*\\)#\\(.*\\)" host) (setq rsh-args ...) (setq host ...)) (setenv "TERM" tramp-terminal-type) (let* (... ... ... ...) (process-kill-without-query p) (set-buffer buf) (tramp-process-actions p multi-method method user host tramp-actions-before-shell) (tramp-message 7 "Initializing remote shell") (tramp-open-connection-setup-interactive-shell p multi-method method user host) (tramp-post-connection multi-method method user host)))
  (progn (when multi-method (error "Cannot multi-connect using rsh connection method")) (tramp-pre-connection multi-method method user host) (if (and user ...) (tramp-message 7 "Opening connection for %s@%s using %s..." user host method) (tramp-message 7 "Opening connection at %s using %s..." host method)) (let (... ... ... ... ...) (when ... ... ...) (setenv "TERM" tramp-terminal-type) (let* ... ... ... ... ... ... ...)))
  (unwind-protect (progn (when multi-method ...) (tramp-pre-connection multi-method method user host) (if ... ... ...) (let ... ... ... ...)) (set-match-data save-match-data-internal))
  (let ((save-match-data-internal ...)) (unwind-protect (progn ... ... ... ...) (set-match-data save-match-data-internal)))
  (save-match-data (when multi-method (error "Cannot multi-connect using rsh connection method")) (tramp-pre-connection multi-method method user host) (if (and user ...) (tramp-message 7 "Opening connection for %s@%s using %s..." user host method) (tramp-message 7 "Opening connection at %s using %s..." host method)) (let (... ... ... ... ...) (when ... ... ...) (setenv "TERM" tramp-terminal-type) (let* ... ... ... ... ... ... ...)))
  tramp-open-connection-rsh(nil nil "user" "foo.net")
  funcall(tramp-open-connection-rsh nil nil "user" "foo.net")
  (if (and p (processp p) (memq ... ...)) nil (when (and p ...) (delete-process p)) (funcall (tramp-get-connection-function multi-method ... user host) multi-method method user host))
  (unless (and p (processp p) (memq ... ...)) (when (and p ...) (delete-process p)) (funcall (tramp-get-connection-function multi-method ... user host) multi-method method user host))
  (let ((p ...) last-cmd-time) (save-excursion (set-buffer ...) (when ... ... ... ...)) (unless (and p ... ...) (when ... ...) (funcall ... multi-method method user host)))
  tramp-maybe-open-connection(nil nil "user" "foo.net")
  (save-excursion (tramp-maybe-open-connection multi-method method user host) (set-buffer (tramp-get-buffer multi-method method user host)) tramp-file-exists-command)
  tramp-get-file-exists-command(nil nil "user" "foo.net")
  (format (tramp-get-file-exists-command multi-method method user host) (tramp-shell-quote-argument path))
  (tramp-send-command-and-check multi-method method user host (format (tramp-get-file-exists-command multi-method method user host) (tramp-shell-quote-argument path)))
  (zerop (tramp-send-command-and-check multi-method method user host (format ... ...)))
  (save-excursion (zerop (tramp-send-command-and-check multi-method method user host ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (save-excursion (zerop ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (save-excursion (zerop ...)))
  tramp-handle-file-exists-p(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (if (tramp-handle-file-exists-p filename) (progn (save-excursion ...)))
  (when (tramp-handle-file-exists-p filename) (save-excursion (if ... ... ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (tramp-handle-file-exists-p filename) (save-excursion ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (tramp-handle-file-exists-p filename) (save-excursion ...)))
  (let (result) (with-parsed-tramp-file-name filename nil (when ... ...) (when ... ...)) result)
  tramp-handle-file-attributes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (nth 8 (tramp-handle-file-attributes filename))
  (tramp-mode-string-to-int (nth 8 (tramp-handle-file-attributes filename)))
  (progn (tramp-mode-string-to-int (nth 8 ...)))
  (if (file-exists-p filename) (progn (tramp-mode-string-to-int ...)))
  (when (file-exists-p filename) (tramp-mode-string-to-int (nth 8 ...)))
  (let* ((v ...) (multi-method ...) (method ...) (user ...) (host ...) (path ...)) (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (file-exists-p filename) (tramp-mode-string-to-int ...)))
  (with-parsed-tramp-file-name filename nil (when (tramp-ange-ftp-file-name-p multi-method method user host) (tramp-invoke-ange-ftp ... filename)) (when (file-exists-p filename) (tramp-mode-string-to-int ...)))
  tramp-handle-file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(tramp-handle-file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (progn (apply (cdr fn) args))
  (unwind-protect (progn (apply ... args)) (set-match-data save-match-data-internal))
  (let ((save-match-data-internal ...)) (unwind-protect (progn ...) (set-match-data save-match-data-internal)))
  (save-match-data (apply (cdr fn) args))
  (catch (quote tramp-forward-to-ange-ftp) (save-match-data (apply ... args)))
  (if fn (catch (quote tramp-forward-to-ange-ftp) (save-match-data ...)) (tramp-run-real-handler operation args))
  (let ((fn ...)) (if fn (catch ... ...) (tramp-run-real-handler operation args)))
  tramp-file-name-handler(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  apply(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  (let ((inhibit-file-name-handlers ...) (inhibit-file-name-operation operation)) (apply operation args))
  ange-ftp-run-real-handler(file-modes (#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil)))
  (if fn (save-match-data (apply fn args)) (ange-ftp-run-real-handler operation args))
  (let ((fn ...)) (if fn (save-match-data ...) (ange-ftp-run-real-handler operation args)))
  ange-ftp-hook-function(file-modes #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  file-modes(#("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil))
  after-find-file(nil t)
  find-file-noselect-1(#<buffer links.html> #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) nil nil #("/user@foo.net:/home/user/public_html/links.html" 0 14 nil 14 24 (rear-nonsticky t field output inhibit-line-move-field-capture t) 24 47 nil) (1 -1))
  find-file-noselect("/user@foo.net:~user/public_html/links.html" nil nil nil)
  find-file("/user@foo.net:~user/public_html/links.html" nil)
  eval((find-file "/user@foo.net:~user/public_html/links.html" nil))
  eval-last-sexp-1(nil)
  eval-last-sexp(nil)
  call-interactively(eval-last-sexp)



The  *ftp user@foo.net*  buffer says, in toto:


ftp> open foo.net
Connected to foo.net.
220 uno.foo.net FTP server (Version wu-2.6.2(1) Fri Feb 22 04:09:00 EST 2002) ready.
user "user" Turtle Power!
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
ftp> 331 Password required for user.
230 User user logged in.
ftp> hash
Hash mark printing on (1024 bytes/hash mark).
ftp> pwd
257 "/home/user" is current directory.
ftp> passive on
Passive mode on.
ftp> get ~user /dev/null
227 Entering Passive Mode (209,213,0,60,173,85)
550 /home/user: not a plain file.
ftp> cd /home/user/public_html/links.html/
550 /home/user/public_html/links.html/: Not a directory.
ftp> cd /home/user/public_html/links.html/
550 /home/user/public_html/links.html/: Not a directory.
ftp> cd /home/user/public_html/
250 CWD command successful.
ftp> ls -al /tmp/ange-ftp31214C4h
227 Entering Passive Mode (209,213,0,60,137,252)
150 Opening ASCII mode data connection for /bin/ls.

226 Transfer complete.
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> type binary
200 Type set to I.
ftp> get /home/user/public_html/links.html /tmp/ange-ftp31214PCo
227 Entering Passive Mode (209,213,0,60,155,160)
150 Opening BINARY mode data connection for /home/user/public_html/links.html (11994 bytes).

226 Transfer complete.
11994 bytes received in 2.3 seconds (5.1 Kbytes/s)
ftp> type ascii
200 Type set to A.
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> quote mdtm /home/user/public_html/links.html
213 20021126125941
ftp> type binary
200 Type set to I.
ftp> put /tmp/ange-ftp31214cMu /home/user/public_html/links.html
227 Entering Passive Mode (209,213,0,60,134,234)
150 Opening BINARY mode data connection for /home/user/public_html/links.html.

226 Transfer complete.
11994 bytes sent in 0.00026 seconds (4.5e+04 Kbytes/s)
ftp> type ascii
200 Type set to A.
ftp> quote mdtm /home/user/public_html/links.html
213 20021126163005
ftp> quote mdtm /home/user/public_html/links.html
213 20021126163005
ftp> quote mdtm /home/user/public_html/links.html
213 20021126163005
ftp> quote mdtm /home/user/public_html/links.html
213 20021126163005
ftp> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26  7:34 ` Kai Großjohann
  2002-11-26 12:50   ` Robert J. Chassell
  2002-11-26 13:03   ` Robert J. Chassell
@ 2002-11-26 22:22   ` Michael Albinus
  2 siblings, 0 replies; 9+ messages in thread
From: Michael Albinus @ 2002-11-26 22:22 UTC (permalink / raw)
  Cc: Kai Großjohann, Clay Jones

kai.grossjohann@uni-duisburg.de (Kai Großjohann) writes:

> > in my .emacs file, but I routinely receive errors like:
> >
> > Wrong type argument: number-or-marker-p, nil
> 
> Oh, boy, this is bad.  I got similar reports previously but didn't
> spend too much time on them because I thought it's not Tramp at
> fault.  But let me try to change this.

I've seen it once some days ago, and my feeling is that it was related
to Emacs 20.7 and the new MD5 stuff you've introduced
recently. Haven't debugged it (yet), 'cause 20.7 isn't my preferred flavor.

> kai

Best regards, Michael.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-25 22:23 I miss ange-ftp ($#@!Tramp) Clay Jones
  2002-11-26  7:34 ` Kai Großjohann
@ 2002-11-27  7:35 ` Richard Stallman
  1 sibling, 0 replies; 9+ messages in thread
From: Richard Stallman @ 2002-11-27  7:35 UTC (permalink / raw)
  Cc: emacs-devel

    in my .emacs file, but I routinely receive errors like:

    Wrong type argument: number-or-marker-p, nil

    when trying to open/save files.

Can you set debug-on-error and make backtraces to show
us some details of these failures?
Please read the Bugs section in the Emacs manual, which provides
guidelines on how to write a bug report to give us the
necessary information so we can fix the bug.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: I miss ange-ftp ($#@!Tramp)
  2002-11-26 16:44       ` Robert J. Chassell
@ 2002-11-27  9:15         ` Kai Großjohann
  0 siblings, 0 replies; 9+ messages in thread
From: Kai Großjohann @ 2002-11-27  9:15 UTC (permalink / raw)


"Robert J. Chassell" <bob@rattlesnake.com> writes:

>     ;;; from emacs/lisp/net/ange-ftp.el
>
>     ;;; This regexp takes care of real ange-ftp file names (with a slash
>     ;;; and colon).
>     ;;; Don't allow the host name to end in a period--some systems use /.:
>     ;;;###autoload
>     (or (assoc "^/[^/:]*[^/:.]:" file-name-handler-alist)
>         (setq file-name-handler-alist
>               (cons '("^/[^/:]*[^/:.]:" . ange-ftp-hook-function)
>                     file-name-handler-alist)))
>
>     ;;; This regexp recognizes absolute filenames with only one component,
>     ;;; for the sake of hostname completion.
>     ;;;###autoload
>     (or (assoc "^/[^/:]*\\'" file-name-handler-alist)
>         (setq file-name-handler-alist
>               (cons '("^/[^/:]*\\'" . ange-ftp-completion-hook-function)
>                     file-name-handler-alist)))
>
>     ;;; This regexp recognizes absolute filenames with only one component
>     ;;; on Windows, for the sake of hostname completion.
>     ;;; NB. Do not mark this as autoload, because it is very common to
>     ;;; do completions in the root directory of drives on Windows.
>     (and (memq system-type '(ms-dos windows-nt))
>          (or (assoc "^[a-zA-Z]:/[^/:]*\\'" file-name-handler-alist)
>              (setq file-name-handler-alist
>                    (cons '("^[a-zA-Z]:/[^/:]*\\'" .
>                            ange-ftp-completion-hook-function)
>                          file-name-handler-alist))))

This means that both Tramp and Ange-FTP are present in
file-name-handler-alist, I think.  (Type C-h v
file-name-handler-alist RET to find out.)

That's not good.

Tramp has been changed to automatically invoke Ange-FTP when
necessary.  So I suggest to either use that facility (if it works),
or to disable Tramp completely if you want to just use Ange-FTP
without Tramp.

I think the following code will disable Tramp:

(setq file-name-handler-alist
      (delelete (assq 'tramp-completion-file-name-handler
                      file-name-handler-alist)
                file-name-handler-alist))
(setq file-name-handler-alist
      (delelete (assq 'tramp-file-name-handler
                      file-name-handler-alist)
                file-name-handler-alist))

I think I should go back to the first bug report where it says that
Ange-FTP failed.

-- 
~/.signature is: umop ap!sdn    (Frank Nobis)

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2002-11-27  9:15 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-25 22:23 I miss ange-ftp ($#@!Tramp) Clay Jones
2002-11-26  7:34 ` Kai Großjohann
2002-11-26 12:50   ` Robert J. Chassell
2002-11-26 13:03   ` Robert J. Chassell
2002-11-26 16:16     ` Kai Großjohann
2002-11-26 16:44       ` Robert J. Chassell
2002-11-27  9:15         ` Kai Großjohann
2002-11-26 22:22   ` Michael Albinus
2002-11-27  7:35 ` Richard Stallman

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/emacs.git
	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.