* Org + Images -> Tex -> PDF
@ 2008-10-18 13:50 Manish
2008-10-18 16:35 ` Russell Adams
2008-12-12 14:37 ` Carsten Dominik
0 siblings, 2 replies; 8+ messages in thread
From: Manish @ 2008-10-18 13:50 UTC (permalink / raw
To: emacs-orgmode
Hello,
I wonder how to add an image (PNG) to an Org file so that it can be
exported to latex and compiled using pdflatex? I tried adding a link
using "[[./load.png][Server Load]]" but it only shows a link (which
also doesn't seem to work.)
I currently add images to Tex documents like so:
,----
| \begin{figure}[H]
| \centering \includegraphics[scale=0.75]{load.png}
| \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
| \end{figure}
`----
Any pointers appreciated.
--
Manish
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-10-18 13:50 Org + Images -> Tex -> PDF Manish
@ 2008-10-18 16:35 ` Russell Adams
2008-10-18 19:06 ` Sebastian Rose
2008-12-12 14:37 ` Carsten Dominik
1 sibling, 1 reply; 8+ messages in thread
From: Russell Adams @ 2008-10-18 16:35 UTC (permalink / raw
To: emacs-orgmode
On Sat, Oct 18, 2008 at 07:20:53PM +0530, Manish wrote:
> Hello,
>
> I wonder how to add an image (PNG) to an Org file so that it can be
> exported to latex and compiled using pdflatex? I tried adding a link
> using "[[./load.png][Server Load]]" but it only shows a link (which
> also doesn't seem to work.)
>
> I currently add images to Tex documents like so:
>
> ,----
> | \begin{figure}[H]
> | \centering \includegraphics[scale=0.75]{load.png}
> | \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
> | \end{figure}
> `----
>
Thats how I'm doing it currently.
------------------------------------------------------------------
Russell Adams RLAdams@AdamsInfoServ.com
PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-10-18 16:35 ` Russell Adams
@ 2008-10-18 19:06 ` Sebastian Rose
2008-10-18 19:20 ` Sebastian Rose
2008-10-18 19:33 ` Manish
0 siblings, 2 replies; 8+ messages in thread
From: Sebastian Rose @ 2008-10-18 19:06 UTC (permalink / raw
To: emacs-orgmode
Hi Manish,
I guess the reason to not include images was, that it would (have)
require(d) the inclusion of special packages:
\usepackage[dvips]{graphicx}
which might not be installed (correct me if I'm wrong).
But nowadays I feel this package is installed in each and every
LaTeX installation!? Even Debian switched to texlive.
Anyway, if graphicx is missing, the compilation will fail.
Russell Adams wrote:
> On Sat, Oct 18, 2008 at 07:20:53PM +0530, Manish wrote:
>> Hello,
>>
>> I wonder how to add an image (PNG) to an Org file so that it can be
>> exported to latex and compiled using pdflatex? I tried adding a link
>> using "[[./load.png][Server Load]]" but it only shows a link (which
>> also doesn't seem to work.)
>>
>> I currently add images to Tex documents like so:
>>
>> ,----
>> | \begin{figure}[H]
>> | \centering \includegraphics[scale=0.75]{load.png}
>> | \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
>> | \end{figure}
>> `----
>>
>
> Thats how I'm doing it currently.
>
> ------------------------------------------------------------------
> Russell Adams RLAdams@AdamsInfoServ.com
>
> PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
>
> Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-10-18 19:06 ` Sebastian Rose
@ 2008-10-18 19:20 ` Sebastian Rose
2008-10-18 19:33 ` Manish
1 sibling, 0 replies; 8+ messages in thread
From: Sebastian Rose @ 2008-10-18 19:20 UTC (permalink / raw
To: [emacs-orgmode]
Sebastian Rose wrote:
> Hi Manish,
>
>
> I guess the reason to not include images was, that it would (have)
> require(d) the inclusion of special packages:
>
> \usepackage[dvips]{graphicx}
Oh, pardon me, was it picins.sty? That package is not in texlive (and
not in Debian testing anymore, I had to install it by hand).
Hrm, so the only way to do it would be some customizable format string?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-10-18 19:06 ` Sebastian Rose
2008-10-18 19:20 ` Sebastian Rose
@ 2008-10-18 19:33 ` Manish
[not found] ` <48FA4BA2.4030307@gmx.de>
1 sibling, 1 reply; 8+ messages in thread
From: Manish @ 2008-10-18 19:33 UTC (permalink / raw
To: sebastian_rose; +Cc: emacs-orgmode
On Sun, Oct 19, 2008 at 12:36 AM, Sebastian Rose wrote:
> Hi Manish,
>
>
> I guess the reason to not include images was, that it would (have)
> require(d) the inclusion of special packages:
>
> \usepackage[dvips]{graphicx}
>
> which might not be installed (correct me if I'm wrong).
> But nowadays I feel this package is installed in each and every
> LaTeX installation!? Even Debian switched to texlive.
>
> Anyway, if graphicx is missing, the compilation will fail.
>
>
> Russell Adams wrote:
>>
>> On Sat, Oct 18, 2008 at 07:20:53PM +0530, Manish wrote:
>>>
>>> Hello,
>>>
>>> I wonder how to add an image (PNG) to an Org file so that it can be
>>> exported to latex and compiled using pdflatex? I tried adding a link
>>> using "[[./load.png][Server Load]]" but it only shows a link (which
>>> also doesn't seem to work.)
>>>
>>> I currently add images to Tex documents like so:
>>>
>>> ,----
>>> | \begin{figure}[H]
>>> | \centering \includegraphics[scale=0.75]{load.png}
>>> | \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
>>> | \end{figure}
>>> `----
>>>
>>
>> Thats how I'm doing it currently.
>>
Thanks Russel and Sebastian.
I do have graphicx installed but I had two issues:
1. image that I included in org file did not use \includegraphics in
the tex file.
2. preamble of tex file did not include \usepackage{graphicx}.
So for 1, I am enclosing the image (the whole \includegraphics etc.)
in a BEGIN_LaTeX and END_LaTeX. And for 2, I am trying to define a
custom class using "org-export-latex-classes" that will include
graphicx and other packages that I use. I guess the setup will take
some work but then it should be one time setup and I hope not to edit
the tex files much after that and go from org to PDF in one fell
swoop. I do not enjoy editing tex files.
Another thing I noticed is that a table in org file appears fine in
produced but does not appear in the \listoftables unless wrapped in a
\begin{table}..\end{table}. Is there an automated/simple way to do
this?
Thanks again,
--
Manish
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
[not found] ` <48FA4BA2.4030307@gmx.de>
@ 2008-10-18 21:08 ` Manish
0 siblings, 0 replies; 8+ messages in thread
From: Manish @ 2008-10-18 21:08 UTC (permalink / raw
To: sebastian_rose; +Cc: emacs-orgmode
On Sun, Oct 19, 2008 at 2:18 AM, Sebastian Rose wrote:
> Hi Manish,
>
>
> I don't enjoy editing TeX files either. I use the setup from Russels
> mail on the org-mode mailing list (I can't find it now). I posted my
> setup (derived from Russels suggestions) a few minutes ago as response
> to the 'Org-Mode Presentation Videos' thread.
>
> Russels setup work abolutely fine for me. And, yes, it's a thing you
> do once for ever.
Yes, I did see your other email. I did find Russell's email [1] and
have been able to set up almost what I want. There are a few
outstanding issues though: images still require to be wrapped in a
[BEGIN|END]_LaTeX construct (I'm sure there's a better way), and I
also have to use \begin and \end table wrapped inside
[BEGIN|END]_LaTeX to wrap org tables to make them appear in
\listoftables. But it's almost there...
Thanks for mentioning your and Russell's setup.
--
Manish
1. http://lists.gnu.org/archive/html/emacs-orgmode/2008-08/msg00044.html
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-10-18 13:50 Org + Images -> Tex -> PDF Manish
2008-10-18 16:35 ` Russell Adams
@ 2008-12-12 14:37 ` Carsten Dominik
2008-12-12 14:41 ` Carsten Dominik
1 sibling, 1 reply; 8+ messages in thread
From: Carsten Dominik @ 2008-12-12 14:37 UTC (permalink / raw
To: Manish; +Cc: emacs-orgmode
Hi Manish,
it has been a long time, but this does now work, with
#+CAPTION: Server Load
[[./load.png]]
- Carsten
On Oct 18, 2008, at 3:50 PM, Manish wrote:
> Hello,
>
> I wonder how to add an image (PNG) to an Org file so that it can be
> exported to latex and compiled using pdflatex? I tried adding a link
> using "[[./load.png][Server Load]]" but it only shows a link (which
> also doesn't seem to work.)
>
> I currently add images to Tex documents like so:
>
> ,----
> | \begin{figure}[H]
> | \centering \includegraphics[scale=0.75]{load.png}
> | \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
> | \end{figure}
> `----
>
> Any pointers appreciated.
>
> --
> Manish
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Org + Images -> Tex -> PDF
2008-12-12 14:37 ` Carsten Dominik
@ 2008-12-12 14:41 ` Carsten Dominik
0 siblings, 0 replies; 8+ messages in thread
From: Carsten Dominik @ 2008-12-12 14:41 UTC (permalink / raw
To: Carsten Dominik; +Cc: emacs-orgmode
Sorry, this was incomplete. To exactly duplicate what you had:
#+CAPTION: Server Load \scriptsize{(Source: RRD)}
#+ATTR_LaTeX: scale=0.75
#+LABEL: gif:load
[[./load.png]]
And you can produce references to the figure with
[[fig:load][the load plot]]
HTH
- Carsten
On Dec 12, 2008, at 3:37 PM, Carsten Dominik wrote:
> Hi Manish,
>
> it has been a long time, but this does now work, with
>
> #+CAPTION: Server Load
> [[./load.png]]
>
>
> - Carsten
>
> On Oct 18, 2008, at 3:50 PM, Manish wrote:
>
>> Hello,
>>
>> I wonder how to add an image (PNG) to an Org file so that it can be
>> exported to latex and compiled using pdflatex? I tried adding a link
>> using "[[./load.png][Server Load]]" but it only shows a link (which
>> also doesn't seem to work.)
>>
>> I currently add images to Tex documents like so:
>>
>> ,----
>> | \begin{figure}[H]
>> | \centering \includegraphics[scale=0.75]{load.png}
>> | \caption{Server Load \scriptsize{(Source: RRD)}\label{fig:load}}
>> | \end{figure}
>> `----
>>
>> Any pointers appreciated.
>>
>> --
>> Manish
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-12-12 14:41 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-18 13:50 Org + Images -> Tex -> PDF Manish
2008-10-18 16:35 ` Russell Adams
2008-10-18 19:06 ` Sebastian Rose
2008-10-18 19:20 ` Sebastian Rose
2008-10-18 19:33 ` Manish
[not found] ` <48FA4BA2.4030307@gmx.de>
2008-10-18 21:08 ` Manish
2008-12-12 14:37 ` Carsten Dominik
2008-12-12 14:41 ` Carsten Dominik
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.