* invalid byte-code error when publishing
@ 2013-08-19 3:43 Mehul Sanghvi
2013-08-19 13:19 ` Mehul Sanghvi
0 siblings, 1 reply; 8+ messages in thread
From: Mehul Sanghvi @ 2013-08-19 3:43 UTC (permalink / raw
To: ML Emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 622 bytes --]
My setup:
========
(emacs-version): 23.4.1
org-version: Org-mode version 8.0.7 (release_8.0.7-369-g9154c7
When publishing using org-html-publish-to-html I get the following error:
Publishing file /home/mehul/org/new-site/emacs.org using
`org-html-publish-to-html'
org-babel-exp processing...
Fontifying *temp*... (regexps......................)
org-babel-exp processing...
setq: Invalid byte code in
/usr/share/emacs/23.4/lisp/emacs-lisp/cl-seq.elc
And the page does not get generated.
Any suggestions on what is wrong ?
cheers,
mehul
--
Mehul N. Sanghvi
email: mehul.sanghvi@gmail.com
[-- Attachment #2: Type: text/html, Size: 1054 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-19 3:43 Mehul Sanghvi
@ 2013-08-19 13:19 ` Mehul Sanghvi
2013-08-19 14:06 ` Sebastien Vauban
0 siblings, 1 reply; 8+ messages in thread
From: Mehul Sanghvi @ 2013-08-19 13:19 UTC (permalink / raw
To: ML Emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1066 bytes --]
The error only occurs if I'm using org-babl. The offending piece of code
I've got is:
#+BEGIN_SRC emacs-lisp
(setq tramp-default-method "ssh")
#+END_SRC
If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine and
I'm able to publish.
On Sun, Aug 18, 2013 at 11:43 PM, Mehul Sanghvi <mehul.sanghvi@gmail.com>wrote:
>
> My setup:
> ========
>
> (emacs-version): 23.4.1
> org-version: Org-mode version 8.0.7 (release_8.0.7-369-g9154c7
>
> When publishing using org-html-publish-to-html I get the following error:
>
> Publishing file /home/mehul/org/new-site/emacs.org using
> `org-html-publish-to-html'
> org-babel-exp processing...
> Fontifying *temp*... (regexps......................)
> org-babel-exp processing...
> setq: Invalid byte code in
> /usr/share/emacs/23.4/lisp/emacs-lisp/cl-seq.elc
>
> And the page does not get generated.
>
> Any suggestions on what is wrong ?
>
>
>
> cheers,
>
> mehul
>
> --
> Mehul N. Sanghvi
> email: mehul.sanghvi@gmail.com
>
--
Mehul N. Sanghvi
email: mehul.sanghvi@gmail.com
[-- Attachment #2: Type: text/html, Size: 2401 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-19 13:19 ` Mehul Sanghvi
@ 2013-08-19 14:06 ` Sebastien Vauban
2013-08-19 15:22 ` Mehul Sanghvi
0 siblings, 1 reply; 8+ messages in thread
From: Sebastien Vauban @ 2013-08-19 14:06 UTC (permalink / raw
To: emacs-orgmode-mXXj517/zsQ
Mehul Sanghvi wrote:
> The error only occurs if I'm using org-babl. The offending piece of code
> I've got is:
>
> #+BEGIN_SRC emacs-lisp
> (setq tramp-default-method "ssh")
> #+END_SRC
>
> If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine and
> I'm able to publish.
Would this fix it?
#+BEGIN_SRC emacs-lisp :eval no
(setq tramp-default-method "ssh")
#+END_SRC
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-19 14:06 ` Sebastien Vauban
@ 2013-08-19 15:22 ` Mehul Sanghvi
2013-08-20 8:20 ` Sebastien Vauban
0 siblings, 1 reply; 8+ messages in thread
From: Mehul Sanghvi @ 2013-08-19 15:22 UTC (permalink / raw
To: Sebastien Vauban; +Cc: ML Emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 761 bytes --]
Sebastien,
Thanks for the suggestion. That does not fix the problem. I still
get the same error as before.
cheers,
mehul
On Mon, Aug 19, 2013 at 10:06 AM, Sebastien Vauban
<sva-news@mygooglest.com>wrote:
> Mehul Sanghvi wrote:
> > The error only occurs if I'm using org-babl. The offending piece of code
> > I've got is:
> >
> > #+BEGIN_SRC emacs-lisp
> > (setq tramp-default-method "ssh")
> > #+END_SRC
> >
> > If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine and
> > I'm able to publish.
>
> Would this fix it?
>
> #+BEGIN_SRC emacs-lisp :eval no
> (setq tramp-default-method "ssh")
> #+END_SRC
>
> Best regards,
> Seb
>
> --
> Sebastien Vauban
>
>
>
--
Mehul N. Sanghvi
email: mehul.sanghvi@gmail.com
[-- Attachment #2: Type: text/html, Size: 1501 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-19 15:22 ` Mehul Sanghvi
@ 2013-08-20 8:20 ` Sebastien Vauban
2013-08-20 12:51 ` Mehul Sanghvi
0 siblings, 1 reply; 8+ messages in thread
From: Sebastien Vauban @ 2013-08-20 8:20 UTC (permalink / raw
To: emacs-orgmode-mXXj517/zsQ
Mehul Sanghvi,
Mehul Sanghvi wrote:
>> Mehul Sanghvi wrote:
>> > The error only occurs if I'm using org-babl. The offending piece of code
>> > I've got is:
>> >
>> > #+BEGIN_SRC emacs-lisp
>> > (setq tramp-default-method "ssh")
>> > #+END_SRC
>> >
>> > If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine and
>> > I'm able to publish.
>>
>> Would this fix it?
>>
>> #+BEGIN_SRC emacs-lisp :eval no
>> (setq tramp-default-method "ssh")
>> #+END_SRC
>
> Thanks for the suggestion. That does not fix the problem. I still
> get the same error as before.
Check out the value of:
- `org-babel-default-header-args', and
- `org-babel-default-header-args:emacs-lisp'.
And try whether `:eval query' makes a difference (when answering yes, and when
answering no)?
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-20 8:20 ` Sebastien Vauban
@ 2013-08-20 12:51 ` Mehul Sanghvi
2013-08-20 13:48 ` Sebastien Vauban
0 siblings, 1 reply; 8+ messages in thread
From: Mehul Sanghvi @ 2013-08-20 12:51 UTC (permalink / raw
To: Sebastien Vauban; +Cc: ML Emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1541 bytes --]
On Tue, Aug 20, 2013 at 4:20 AM, Sebastien Vauban
<sva-news@mygooglest.com>wrote:
> Mehul Sanghvi,
>
> Mehul Sanghvi wrote:
> >> Mehul Sanghvi wrote:
> >> > The error only occurs if I'm using org-babl. The offending piece of
> code
> >> > I've got is:
> >> >
> >> > #+BEGIN_SRC emacs-lisp
> >> > (setq tramp-default-method "ssh")
> >> > #+END_SRC
> >> >
> >> > If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine
> and
> >> > I'm able to publish.
> >>
> >> Would this fix it?
> >>
> >> #+BEGIN_SRC emacs-lisp :eval no
> >> (setq tramp-default-method "ssh")
> >> #+END_SRC
> >
> > Thanks for the suggestion. That does not fix the problem. I
> still
> > get the same error as before.
>
> Check out the value of:
>
> - `org-babel-default-header-args', and
> - `org-babel-default-header-args:emacs-lisp'.
>
> And try whether `:eval query' makes a difference (when answering yes, and
> when
> answering no)?
>
>
Using 'C-h v' I get the following:
org-babel-default-header-args is a variable defined in `ob-core.el'.
Its value is ((:session . "none")
(:results . "replace")
(:exports . "code")
(:cache . "no")
(:noweb . "no")
(:hlines . "no")
(:tangle . "no")
(:padnewline . "yes"))
org-babel-default-header-args:emacs-lisp is a variable defined in
`ob-emacs-lisp.el'.
Its value is ((:hlines . "yes")
(:colnames . "no"))
Using ':eval query' does not make a difference. It does not prompt for
yes or no.
cheers,
mehul
--
Mehul N. Sanghvi
email: mehul.sanghvi@gmail.com
[-- Attachment #2: Type: text/html, Size: 4567 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
2013-08-20 12:51 ` Mehul Sanghvi
@ 2013-08-20 13:48 ` Sebastien Vauban
0 siblings, 0 replies; 8+ messages in thread
From: Sebastien Vauban @ 2013-08-20 13:48 UTC (permalink / raw
To: emacs-orgmode-mXXj517/zsQ
Mehul Sanghvi wrote:
> Sebastien Vauban wrote:
>> Mehul Sanghvi wrote:
>>>> Mehul Sanghvi wrote:
>>>>> The error only occurs if I'm using org-babl. The offending piece of code
>>>>> I've got is:
>>>>>
>>>>> #+BEGIN_SRC emacs-lisp
>>>>> (setq tramp-default-method "ssh")
>>>>> #+END_SRC
>>>>>
>>>>> If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine and
>>>>> I'm able to publish.
>>>>
>>>> Would this fix it?
>>>>
>>>> #+BEGIN_SRC emacs-lisp :eval no
>>>> (setq tramp-default-method "ssh")
>>>> #+END_SRC
>>>
>>> Thanks for the suggestion. That does not fix the problem. I still get the
>>> same error as before.
>>
>> Check out the value of:
>>
>> - `org-babel-default-header-args', and
>> - `org-babel-default-header-args:emacs-lisp'.
>>
>> And try whether `:eval query' makes a difference (when answering yes, and
>> when answering no)?
>
> Using ':eval query' does not make a difference. It does not prompt for yes
> or no.
Then, there are now 2 things I don't understand:
- why it does not query you for eval?
- why that code gets you in troubles?
I'm out of ideas here...
Try with an ECM, or with emacs -Q?
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: invalid byte-code error when publishing
@ 2013-08-21 20:49 Mehul Sanghvi
0 siblings, 0 replies; 8+ messages in thread
From: Mehul Sanghvi @ 2013-08-21 20:49 UTC (permalink / raw
To: Sebastien Vauban; +Cc: ML Emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1631 bytes --]
On Tue, Aug 20, 2013 at 9:48 AM, Sebastien Vauban
<sva-news@mygooglest.com>wrote:
> Mehul Sanghvi wrote:
> > Sebastien Vauban wrote:
> >> Mehul Sanghvi wrote:
> >>>> Mehul Sanghvi wrote:
> >>>>> The error only occurs if I'm using org-babl. The offending piece of
> code
> >>>>> I've got is:
> >>>>>
> >>>>> #+BEGIN_SRC emacs-lisp
> >>>>> (setq tramp-default-method "ssh")
> >>>>> #+END_SRC
> >>>>>
> >>>>> If I remove the #+BEGIN_SRC and #+END_SRC than everything works fine
> and
> >>>>> I'm able to publish.
> >>>>
> >>>> Would this fix it?
> >>>>
> >>>> #+BEGIN_SRC emacs-lisp :eval no
> >>>> (setq tramp-default-method "ssh")
> >>>> #+END_SRC
> >>>
> >>> Thanks for the suggestion. That does not fix the problem. I still get
> the
> >>> same error as before.
> >>
> >> Check out the value of:
> >>
> >> - `org-babel-default-header-args', and
> >> - `org-babel-default-header-args:emacs-lisp'.
> >>
> >> And try whether `:eval query' makes a difference (when answering yes,
> and
> >> when answering no)?
> >
> > Using ':eval query' does not make a difference. It does not prompt for
> yes
> > or no.
>
> Then, there are now 2 things I don't understand:
>
> - why it does not query you for eval?
> - why that code gets you in troubles?
>
> I'm out of ideas here...
>
> Try with an ECM, or with emacs -Q?
>
> Best regards,
> Seb
>
> --
> Sebastien Vauban
>
>
>
This works now. I don't know why it was causing problems, but it worked
just fine in a new instance. I had done a org-reload rather than re-start
my emacs.
Thanks for your help.
cheers,
mehul
--
Mehul N. Sanghvi
email: mehul.sanghvi@gmail.com
[-- Attachment #2: Type: text/html, Size: 2931 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-08-21 20:49 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-21 20:49 invalid byte-code error when publishing Mehul Sanghvi
-- strict thread matches above, loose matches on Subject: below --
2013-08-19 3:43 Mehul Sanghvi
2013-08-19 13:19 ` Mehul Sanghvi
2013-08-19 14:06 ` Sebastien Vauban
2013-08-19 15:22 ` Mehul Sanghvi
2013-08-20 8:20 ` Sebastien Vauban
2013-08-20 12:51 ` Mehul Sanghvi
2013-08-20 13:48 ` Sebastien Vauban
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/emacs.git
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.